/*
 * drivers/display/lcd/lcd_tv/lcd_drv.c
 *
 * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
*/

#include <common.h>
#include <malloc.h>
#include <asm/arch/io.h>
#include <amlogic/aml_lcd.h>
#include "../aml_lcd_reg.h"
#include "../aml_lcd_common.h"
#include "lcd_tv.h"

static int lcd_type_supported(struct lcd_config_s *pconf)
{
	int lcd_type = pconf->lcd_basic.lcd_type;
	int ret = -1;

	switch (lcd_type) {
	case LCD_LVDS:
	case LCD_VBYONE:
	case LCD_MLVDS:
		ret = 0;
		break;
	default:
		LCDERR("invalid lcd type: %s(%d)\n",
			lcd_type_type_to_str(lcd_type), lcd_type);
		break;
	}
	return ret;
}

static void lcd_vbyone_phy_set(struct lcd_config_s *pconf, int status)
{
	unsigned int vswing, preem, ext_pullup;
	unsigned int data32;
	unsigned int rinner_table[] = {0xa, 0xa, 0x6, 0x4};

	if (lcd_debug_print_flag)
		LCDPR("%s: %d\n", __func__, status);

	if (status) {
		ext_pullup = (pconf->lcd_control.vbyone_config->phy_vswing >> 4) & 0x3;
		vswing = pconf->lcd_control.vbyone_config->phy_vswing & 0xf;
		preem = pconf->lcd_control.vbyone_config->phy_preem;
		if (vswing > 7) {
			LCDERR("%s: wrong vswing_level=%d, use default\n",
				__func__, vswing);
			vswing = VX1_PHY_VSWING_DFT;
		}
		if (preem > 7) {
			LCDERR("%s: wrong preemphasis_level=%d, use default\n",
				__func__, preem);
			preem = VX1_PHY_PREEM_DFT;
		}
		if (ext_pullup)
			data32 = VX1_PHY_CNTL1_G9TV_PULLUP | (vswing << 3);
		else
			data32 = VX1_PHY_CNTL1_G9TV | (vswing << 3);
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL1, data32);
		data32 = VX1_PHY_CNTL2_G9TV | (preem << 20) |
			(rinner_table[ext_pullup] << 8);
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL2, data32);
		data32 = VX1_PHY_CNTL3_G9TV;
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL3, data32);
	} else {
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL1, 0x0);
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL2, 0x0);
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL3, 0x0);
	}
}

static void lcd_lvds_phy_set(struct lcd_config_s *pconf, int status)
{
	unsigned int vswing, preem, clk_vswing, clk_preem, channel_on;
	unsigned int data32;
	struct aml_lcd_drv_s *lcd_drv = aml_lcd_get_driver();

	if (lcd_debug_print_flag)
		LCDPR("%s: %d\n", __func__, status);

	if (status) {
		vswing = pconf->lcd_control.lvds_config->phy_vswing;
		preem = pconf->lcd_control.lvds_config->phy_preem;
		clk_vswing = pconf->lcd_control.lvds_config->phy_clk_vswing;
		clk_preem = pconf->lcd_control.lvds_config->phy_clk_preem;
		if (vswing > 7) {
			LCDERR("%s: wrong vswing_level=%d, use default\n",
				__func__, vswing);
			vswing = LVDS_PHY_VSWING_DFT;
		}
		channel_on = lcd_lvds_channel_on_value(pconf);

		switch (lcd_drv->chip_type) {
		case LCD_CHIP_TXHD:
			if (preem > 3) {
				LCDERR("%s: wrong preemphasis_level=%d, use default\n",
					__func__, preem);
				preem = LVDS_PHY_PREEM_DFT;
			}

			data32 = LVDS_PHY_CNTL1_TXHD |
				(vswing << 3) | (vswing << 0) | (preem << 23);
			lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL1, data32);
			data32 = LVDS_PHY_CNTL2_TXHD |
				(preem << 14) | (preem << 12) |
				(preem << 26) | (preem << 24);
			lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL2, data32);
			data32 = LVDS_PHY_CNTL3_TXHD |
				(preem << 6) | (preem << 4) |
				(preem << 2) | (preem << 0) | (preem << 30);
			lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL3, data32);
			break;
		default:
			if (preem > 7) {
				LCDERR("%s: wrong preemphasis_level=%d, use default\n",
					__func__, preem);
				preem = LVDS_PHY_PREEM_DFT;
			}
			if (clk_vswing > 3) {
				LCDERR("%s: wrong clk_vswing_level=%d, use default\n",
					__func__, clk_vswing);
				clk_vswing = LVDS_PHY_CLK_VSWING_DFT;
			}
			if (clk_preem > 7) {
				LCDERR("%s: wrong clk_preem_level=%d, use default\n",
					__func__, clk_preem);
				clk_preem = LVDS_PHY_CLK_PREEM_DFT;
			}

			data32 = LVDS_PHY_CNTL1_G9TV |
				(vswing << 26) | (preem << 0);
			lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL1, data32);
			/*lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL1, 0x6c6cca80);*/
			data32 = LVDS_PHY_CNTL2_G9TV;
			lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL2, data32);
			data32 = LVDS_PHY_CNTL3_G9TV |
				(channel_on << 16) | /* DIF_TX_CTL5 */
				(clk_vswing << 8) | (clk_preem << 5); /* DIF_TX_CTL4 */
			lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL3, data32);
			/*lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL3, 0x0fff0800);*/
			break;
		}
	} else {
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL1, 0x0);
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL2, 0x0);
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL3, 0x0);
	}
}

static void lcd_mlvds_phy_set(struct lcd_config_s *pconf, int status)
{
	unsigned int vswing, preem;
	unsigned int data32;

	if (lcd_debug_print_flag)
		LCDPR("%s: %d\n", __func__, status);

	if (status) {
		vswing = pconf->lcd_control.mlvds_config->phy_vswing;
		preem = pconf->lcd_control.mlvds_config->phy_preem;
		if (vswing > 7) {
			LCDERR("%s: wrong vswing_level=%d, use default\n",
				__func__, vswing);
			vswing = LVDS_PHY_VSWING_DFT;
		}
		if (preem > 3) {
			LCDERR("%s: wrong preemphasis_level=%d, use default\n",
				__func__, preem);
			preem = LVDS_PHY_PREEM_DFT;
		}

		data32 = MLVDS_PHY_CNTL1_TXHD |
			(vswing << 3) | (vswing << 0) | (preem << 23);
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL1, data32);
		data32 = MLVDS_PHY_CNTL2_TXHD |
			(preem << 14) | (preem << 12) |
			(preem << 26) | (preem << 24);
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL2, data32);
		data32 = MLVDS_PHY_CNTL3_TXHD |
			(preem << 6) | (preem << 4) |
			(preem << 2) | (preem << 0) | (preem << 30);
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL3, data32);
	} else {
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL1, 0x0);
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL2, 0x0);
		lcd_hiu_write(HHI_DIF_CSI_PHY_CNTL3, 0x0);
	}
}

static void lcd_encl_tcon_set(struct lcd_config_s *pconf)
{
	lcd_vcbus_write(L_RGB_BASE_ADDR, 0);
	lcd_vcbus_write(L_RGB_COEFF_ADDR, 0x400);

	switch (pconf->lcd_basic.lcd_bits) {
	case 6:
		lcd_vcbus_write(L_DITH_CNTL_ADDR,  0x600);
		break;
	case 8:
		lcd_vcbus_write(L_DITH_CNTL_ADDR,  0x400);
		break;
	case 10:
	default:
		lcd_vcbus_write(L_DITH_CNTL_ADDR,  0x0);
		break;
	}

	switch (pconf->lcd_basic.lcd_type) {
	case LCD_LVDS:
		lcd_vcbus_setb(L_POL_CNTL_ADDR, 1, 0, 1);
		if (pconf->lcd_timing.vsync_pol)
			lcd_vcbus_setb(L_POL_CNTL_ADDR, 1, 1, 1);
		break;
	case LCD_VBYONE:
		if (pconf->lcd_timing.hsync_pol)
			lcd_vcbus_setb(L_POL_CNTL_ADDR, 1, 0, 1);
		if (pconf->lcd_timing.vsync_pol)
			lcd_vcbus_setb(L_POL_CNTL_ADDR, 1, 1, 1);
		break;
	default:
		break;
	}

	lcd_vcbus_write(VPP_MISC, lcd_vcbus_read(VPP_MISC) & ~(VPP_OUT_SATURATE));
}

static void lcd_venc_set(struct lcd_config_s *pconf)
{
	unsigned int h_active, v_active;
	unsigned int video_on_pixel, video_on_line;

	if (lcd_debug_print_flag)
		LCDPR("%s\n", __func__);

	h_active = pconf->lcd_basic.h_active;
	v_active = pconf->lcd_basic.v_active;
	video_on_pixel = pconf->lcd_timing.video_on_pixel;
	video_on_line = pconf->lcd_timing.video_on_line;

	lcd_vcbus_write(ENCL_VIDEO_EN, 0);

	lcd_vcbus_write(VPU_VIU_VENC_MUX_CTRL, (0 << 0) | (0 << 2));    // viu1 select encl | viu2 select encl
	lcd_vcbus_write(ENCL_VIDEO_MODE, 0x8000); // bit[15] shadown en
	lcd_vcbus_write(ENCL_VIDEO_MODE_ADV, 0x0418); // Sampling rate: 1

	// bypass filter
	lcd_vcbus_write(ENCL_VIDEO_FILT_CTRL, 0x1000);
	lcd_vcbus_write(ENCL_VIDEO_MAX_PXCNT, pconf->lcd_basic.h_period - 1);
	lcd_vcbus_write(ENCL_VIDEO_MAX_LNCNT, pconf->lcd_basic.v_period - 1);
	lcd_vcbus_write(ENCL_VIDEO_HAVON_BEGIN, video_on_pixel);
	lcd_vcbus_write(ENCL_VIDEO_HAVON_END,   h_active - 1 + video_on_pixel);
	lcd_vcbus_write(ENCL_VIDEO_VAVON_BLINE, video_on_line);
	lcd_vcbus_write(ENCL_VIDEO_VAVON_ELINE, v_active - 1  + video_on_line);

	lcd_vcbus_write(ENCL_VIDEO_HSO_BEGIN, pconf->lcd_timing.hs_hs_addr);
	lcd_vcbus_write(ENCL_VIDEO_HSO_END,   pconf->lcd_timing.hs_he_addr);
	lcd_vcbus_write(ENCL_VIDEO_VSO_BEGIN, pconf->lcd_timing.vs_hs_addr);
	lcd_vcbus_write(ENCL_VIDEO_VSO_END,   pconf->lcd_timing.vs_he_addr);
	lcd_vcbus_write(ENCL_VIDEO_VSO_BLINE, pconf->lcd_timing.vs_vs_addr);
	lcd_vcbus_write(ENCL_VIDEO_VSO_ELINE, pconf->lcd_timing.vs_ve_addr);
	lcd_vcbus_write(ENCL_VIDEO_RGBIN_CTRL, 3);

	/* default black pattern */
	lcd_vcbus_write(ENCL_TST_MDSEL, 0);
	lcd_vcbus_write(ENCL_TST_Y, 0);
	lcd_vcbus_write(ENCL_TST_CB, 0);
	lcd_vcbus_write(ENCL_TST_CR, 0);
	lcd_vcbus_write(ENCL_TST_EN, 1);
	lcd_vcbus_setb(ENCL_VIDEO_MODE_ADV, 0, 3, 1);

	lcd_vcbus_write(ENCL_VIDEO_EN, 1);
}

static void lcd_lvds_clk_util_set(struct lcd_config_s *pconf)
{
	unsigned int phy_div;

	if (pconf->lcd_control.lvds_config->dual_port)
		phy_div = 2;
	else
		phy_div = 1;

	/* set fifo_clk_sel: div 7 */
	lcd_hiu_write(HHI_LVDS_TX_PHY_CNTL0, (1 << 6));
	/* set cntl_ser_en:  8-channel to 1 */
	lcd_hiu_setb(HHI_LVDS_TX_PHY_CNTL0, 0xfff, 16, 12);

	/* decoupling fifo enable, gated clock enable */
	lcd_hiu_write(HHI_LVDS_TX_PHY_CNTL1,
		(1 << 30) | ((phy_div - 1) << 25) | (1 << 24));
	/* decoupling fifo write enable after fifo enable */
	lcd_hiu_setb(HHI_LVDS_TX_PHY_CNTL1, 1, 31, 1);
}

static void lcd_lvds_control_set(struct lcd_config_s *pconf)
{
	unsigned int bit_num = 1;
	unsigned int pn_swap, port_swap, lane_reverse;
	unsigned int dual_port, fifo_mode;
	unsigned int lvds_repack = 1;
	unsigned int ch_swap0, ch_swap1, ch_swap2, temp0, temp1;
	struct aml_lcd_drv_s *lcd_drv = aml_lcd_get_driver();

	if (lcd_debug_print_flag)
		LCDPR("%s\n", __func__);

	lcd_lvds_clk_util_set(pconf);

	lvds_repack = (pconf->lcd_control.lvds_config->lvds_repack) & 0x3;
	pn_swap   = (pconf->lcd_control.lvds_config->pn_swap) & 0x1;
	dual_port = (pconf->lcd_control.lvds_config->dual_port) & 0x1;
	port_swap = (pconf->lcd_control.lvds_config->port_swap) & 0x1;
	lane_reverse = (pconf->lcd_control.lvds_config->lane_reverse) & 0x1;

	switch (pconf->lcd_basic.lcd_bits) {
	case 10:
		bit_num=0;
		break;
	case 8:
		bit_num=1;
		break;
	case 6:
		bit_num=2;
		break;
	case 4:
		bit_num=3;
		break;
	default:
		bit_num=1;
		break;
	}
	if (dual_port)
		fifo_mode = 0x3;
	else
		fifo_mode = 0x1;

	lcd_vcbus_write(LVDS_PACK_CNTL_ADDR,
			(lvds_repack << 0) | // repack //[1:0]
			(0 << 3) |		// reserve
			(0 << 4) |		// lsb first
			(pn_swap << 5) |	// pn swap
			(dual_port << 6) |	// dual port
			(0 << 7) |		// use tcon control
			(bit_num << 8) |	// 0:10bits, 1:8bits, 2:6bits, 3:4bits.
			(0 << 10) |		//r_select  //0:R, 1:G, 2:B, 3:0
			(1 << 12) |		//g_select  //0:R, 1:G, 2:B, 3:0
			(2 << 14));		//b_select  //0:R, 1:G, 2:B, 3:0;

	/* lvsd swap */
	switch (lcd_drv->chip_type) {
	case LCD_CHIP_TXHD:
		/* lvds channel:    //tx 10 channels
		 *    0: d0_a
		 *    1: d1_a
		 *    2: d2_a
		 *    3: clk_a
		 *    4: d3_a
		 *    5: d4_a
		 *    6: d0_b
		 *    7: d1_b
		 *    8: d2_b
		 *    9: clk_b
		 *    a: d3_b
		 *    b: d4_b */
		ch_swap0 = 0x3210;
		ch_swap1 = 0x8764;
		ch_swap2 = 0x00a9;
		if (port_swap) {
			temp0 = ((ch_swap1 << 16) | ch_swap0) & 0xfffff;
			temp1 = ((ch_swap2 << 12) | (ch_swap1 >> 4)) & 0xfffff;
			/* ch_swap0: temp1[15:0]
			 * ch_swap1: temp0[11:0], temp1[19:16]
			 * ch_swap2: temp0[19:12] */
			ch_swap0 = temp1 & 0xffff;
			ch_swap1 = ((temp0 << 4) | ((temp1 >> 16) & 0xf)) & 0xffff;
			ch_swap2 = (temp0 >> 12) & 0xff;
		}
		if (lane_reverse) {
			temp0 = ((ch_swap1 << 16) | ch_swap0) & 0xfffff;
			temp1 = ((ch_swap2 << 12) | (ch_swap1 >> 4)) & 0xfffff;
			/* ch_swap0: temp0[7:4], temp0[11:8], temp0[15:12], temp0[19:16]
			 * ch_swap1: temp1[11:8], temp1[15:12], temp1[19:16], temp0[3:0]
			 * ch_swap2: temp1[3:0], temp1[7:4] */
			ch_swap0 = (((temp0 >> 4) & 0xf) << 12) |
				(((temp0 >> 8) & 0xf) << 8) |
				(((temp0 >> 12) & 0xf) << 4) |
				(((temp0 >> 16) & 0xf) << 0);
			ch_swap1 = (((temp1 >> 8) & 0xf) << 12) |
				(((temp1 >> 12) & 0xf) << 8) |
				(((temp1 >> 16) & 0xf) << 4) |
				(((temp0 >> 0) & 0xf) << 0);
			ch_swap2 = (((temp1 >> 0) & 0xf) << 4) |
				(((temp1 >> 4) & 0xf) << 0);
		}
		lcd_vcbus_write(LVDS_CH_SWAP0, ch_swap0);
		lcd_vcbus_write(LVDS_CH_SWAP1, ch_swap1);
		lcd_vcbus_write(LVDS_CH_SWAP2, ch_swap2);
		break;
	default:
		lcd_vcbus_setb(LCD_PORT_SWAP, port_swap, 12, 1);
		if (lane_reverse)
			lcd_vcbus_setb(LVDS_GEN_CNTL, 0x03, 13, 2);
		break;
	}

	lcd_vcbus_write(LVDS_GEN_CNTL, (lcd_vcbus_read(LVDS_GEN_CNTL) | (1 << 4) | (fifo_mode << 0)));
	lcd_vcbus_setb(LVDS_GEN_CNTL, 1, 3, 1);
}

static void lcd_lvds_disable(void)
{
	lcd_vcbus_setb(LVDS_GEN_CNTL, 0, 3, 1); /* disable lvds fifo */
}

static void lcd_mlvds_clk_util_set(struct lcd_config_s *pconf)
{
	unsigned int lcd_bits, div_sel;

	lcd_bits = pconf->lcd_basic.lcd_bits;

	switch (lcd_bits) {
	case 6:
		div_sel = 0;
		break;
	case 8:
		div_sel = 2;
		break;
	default:
		div_sel = 2;
		break;
	}

	/* set fifo_clk_sel */
	lcd_hiu_write(HHI_LVDS_TX_PHY_CNTL0, (div_sel << 6));
	/* set cntl_ser_en:  8-channel to 1 */
	lcd_hiu_setb(HHI_LVDS_TX_PHY_CNTL0, 0xfff, 16, 12);

	/* decoupling fifo enable, gated clock enable */
	lcd_hiu_write(HHI_LVDS_TX_PHY_CNTL1,
		(1 << 30) | (0 << 25) | (1 << 24));
	/* decoupling fifo write enable after fifo enable */
	lcd_hiu_setb(HHI_LVDS_TX_PHY_CNTL1, 1, 31, 1);
}

static void lcd_mlvds_control_set(struct lcd_config_s *pconf)
{
	unsigned int bit_num = 1;

	if (lcd_debug_print_flag)
		LCDPR("%s\n", __func__);

	lcd_mlvds_clk_util_set(pconf);

	switch (pconf->lcd_basic.lcd_bits) {
	case 10:
		bit_num=0;
		break;
	case 8:
		bit_num=1;
		break;
	case 6:
		bit_num=2;
		break;
	case 4:
		bit_num=3;
		break;
	default:
		bit_num=1;
		break;
	}

	lcd_vcbus_write(LVDS_PACK_CNTL_ADDR,
			(1 << 0) | // repack //[1:0]
			(0 << 3) |		// reserve
			(0 << 4) |		// lsb first
			(0 << 5) |	// pn swap
			(1 << 6) |	// dual port
			(0 << 7) |		// use tcon control
			(bit_num << 8) |	// 0:10bits, 1:8bits, 2:6bits, 3:4bits.
			(0 << 10) |		//r_select  //0:R, 1:G, 2:B, 3:0
			(1 << 12) |		//g_select  //0:R, 1:G, 2:B, 3:0
			(2 << 14));		//b_select  //0:R, 1:G, 2:B, 3:0;

	lcd_vcbus_write(LVDS_GEN_CNTL, (lcd_vcbus_read(LVDS_GEN_CNTL) | (1 << 4) | (0x3 << 0)));
	lcd_vcbus_setb(LVDS_GEN_CNTL, 1, 3, 1);

	lcd_tcon_init(pconf);
}

static void lcd_mlvds_disable(void)
{
	lcd_tcon_disable();

	lcd_vcbus_setb(LVDS_GEN_CNTL, 0, 3, 1); /* disable lvds fifo */
}

static void lcd_vbyone_sync_pol(int hsync_pol, int vsync_pol)
{
	lcd_vcbus_setb(VBO_VIN_CTRL, hsync_pol, 4, 1);
	lcd_vcbus_setb(VBO_VIN_CTRL, vsync_pol, 5, 1);

	lcd_vcbus_setb(VBO_VIN_CTRL, hsync_pol, 6, 1);
	lcd_vcbus_setb(VBO_VIN_CTRL, vsync_pol, 7, 1);
}

static void lcd_vbyone_clk_util_set(struct lcd_config_s *pconf)
{
	unsigned int lcd_bits;
	unsigned int div_sel, phy_div;

	phy_div = pconf->lcd_control.vbyone_config->phy_div;
	lcd_bits = pconf->lcd_basic.lcd_bits;

	switch (lcd_bits) {
	case 6:
		div_sel = 0;
		break;
	case 8:
		div_sel = 2;
		break;
	case 10:
		div_sel = 3;
		break;
	default:
		div_sel = 3;
		break;
	}
	/* set fifo_clk_sel */
	lcd_hiu_write(HHI_LVDS_TX_PHY_CNTL0, (div_sel << 6));
	/* set cntl_ser_en:  8-channel to 1 */
	lcd_hiu_setb(HHI_LVDS_TX_PHY_CNTL0, 0xfff, 16, 12);

	/* decoupling fifo enable, gated clock enable */
	lcd_hiu_write(HHI_LVDS_TX_PHY_CNTL1,
		(1 << 30) | ((phy_div - 1) << 25) | (1 << 24));
	/* decoupling fifo write enable after fifo enable */
	lcd_hiu_setb(HHI_LVDS_TX_PHY_CNTL1, 1, 31, 1);
}

static int lcd_vbyone_lanes_set(int lane_num, int byte_mode, int region_num,
		int hsize, int vsize)
{
	int sublane_num;
	int region_size[4];
	int tmp;

	switch (lane_num) {
	case 1:
	case 2:
	case 4:
	case 8:
		break;
	default:
		return -1;
	}
	switch (region_num) {
	case 1:
	case 2:
	case 4:
		break;
	default:
		return -1;
	}
	if (lane_num % region_num)
		return -1;
	switch (byte_mode) {
	case 3:
	case 4:
		break;
	default:
		return -1;
	}
	if (lcd_debug_print_flag) {
		LCDPR("byte_mode=%d, lane_num=%d, region_num=%d\n",
			byte_mode, lane_num, region_num);
	}

	sublane_num = lane_num / region_num; /* lane num in each region */
	lcd_vcbus_setb(VBO_LANES, (lane_num - 1), 0, 3);
	lcd_vcbus_setb(VBO_LANES, (region_num - 1), 4, 2);
	lcd_vcbus_setb(VBO_LANES, (sublane_num - 1), 8, 3);
	lcd_vcbus_setb(VBO_LANES, (byte_mode - 1), 11, 2);

	if (region_num > 1) {
		region_size[3] = (hsize / lane_num) * sublane_num;
		tmp = (hsize % lane_num);
		region_size[0] = region_size[3] + (((tmp / sublane_num) > 0) ?
			sublane_num : (tmp % sublane_num));
		region_size[1] = region_size[3] + (((tmp / sublane_num) > 1) ?
			sublane_num : (tmp % sublane_num));
		region_size[2] = region_size[3] + (((tmp / sublane_num) > 2) ?
			sublane_num : (tmp % sublane_num));
		lcd_vcbus_write(VBO_REGION_00, region_size[0]);
		lcd_vcbus_write(VBO_REGION_01, region_size[1]);
		lcd_vcbus_write(VBO_REGION_02, region_size[2]);
		lcd_vcbus_write(VBO_REGION_03, region_size[3]);
	}
	lcd_vcbus_write(VBO_ACT_VSIZE, vsize);
	/* different from FBC code!!! */
	/* lcd_vcbus_setb(VBO_CTRL_H,0x80,11,5); */
	/* different from simulation code!!! */
	lcd_vcbus_setb(VBO_CTRL_H, 0x0, 0, 4);
	lcd_vcbus_setb(VBO_CTRL_H, 0x1, 9, 1);
	/* lcd_vcbus_setb(VBO_CTRL_L,enable,0,1); */

	return 0;
}

static void lcd_vbyone_sw_reset(void)
{
	if (lcd_debug_print_flag)
		LCDPR("%s\n", __func__);

	/* force PHY to 0 */
	lcd_hiu_setb(HHI_LVDS_TX_PHY_CNTL0, 3, 8, 2);
	lcd_vcbus_write(VBO_SOFT_RST, 0x1ff);
	udelay(5);
	/* realease PHY */
	lcd_hiu_setb(HHI_LVDS_TX_PHY_CNTL0, 0, 8, 2);
	lcd_vcbus_write(VBO_SOFT_RST, 0);
}

static void lcd_vbyone_wait_timing_stable(void)
{
	unsigned int timing_state;
	int i = 200;

	timing_state = lcd_vcbus_read(VBO_INTR_STATE) & 0x1ff;
	while ((timing_state) && (i > 0)) {
		/* clear video timing error intr */
		lcd_vcbus_setb(VBO_INTR_STATE_CTRL, 0x7, 0, 3);
		lcd_vcbus_setb(VBO_INTR_STATE_CTRL, 0, 0, 3);
		mdelay(2);
		timing_state = lcd_vcbus_read(VBO_INTR_STATE) & 0x1ff;
		i--;
	};
	if (lcd_debug_print_flag) {
		LCDPR("vbyone timing state: 0x%03x, i=%d\n",
			timing_state, (200 - i));
	}
	mdelay(2);
}

#define VX1_LOCKN_GPIO    "GPIOH_0"
static int lcd_vbyone_get_lockn_gpio(void)
{
	int ret;

	lcd_periphs_setb(PREG_PAD_GPIO1_EN_N, 1, 20, 1);
	ret =lcd_periphs_getb(PREG_PAD_GPIO1_I, 20, 1);
	if (lcd_debug_print_flag)
		LCDPR("gpio %s = %d\n", VX1_LOCKN_GPIO, ret);

	return ret;
}

static int lcd_vbyone_sw_fliter(struct vbyone_config_s *vx1_conf)
{
	int i,t;
	int lock_temp, lock_state = 1;

	for (i = 0; i < vx1_conf->vx1_sw_filter_cnt; i++) {
		for (t = 0; t < vx1_conf->vx1_sw_filter_time; t++)
			udelay(100);
		lock_temp = lcd_vbyone_get_lockn_gpio();
		if (lock_temp == 0)
			lock_state = 0;
	}

	return lock_state;
}

static void lcd_vbyone_cdr_training_hold(struct vbyone_config_s *vx1_conf, int flag)
{
	if (flag) {
		LCDPR("ctrl_flag for cdr_training_hold\n");
		lcd_vcbus_setb(VBO_FSM_HOLDER_H, 0xffff, 0, 16);
	} else {
		mdelay(vx1_conf->cdr_training_hold);
		lcd_vcbus_setb(VBO_FSM_HOLDER_H, 0, 0, 16);
	}
}

static void lcd_vbyone_control_set(struct lcd_config_s *pconf)
{
	int lane_count, byte_mode, region_num, hsize, vsize;
	/* int color_fmt; */
	int vin_color, vin_bpp;

	if (lcd_debug_print_flag)
		LCDPR("%s\n", __func__);

	hsize = pconf->lcd_basic.h_active;
	vsize = pconf->lcd_basic.v_active;
	lane_count = pconf->lcd_control.vbyone_config->lane_count; /* 8 */
	region_num = pconf->lcd_control.vbyone_config->region_num; /* 2 */
	byte_mode = pconf->lcd_control.vbyone_config->byte_mode; /* 4 */
	/* color_fmt = pconf->lcd_control.vbyone_config->color_fmt; // 4 */

	lcd_vbyone_clk_util_set(pconf);
#if 0
	switch (color_fmt) {
	case 0:/* SDVT_VBYONE_18BPP_RGB */
		vin_color = 4;
		vin_bpp   = 2;
		break;
	case 1:/* SDVT_VBYONE_18BPP_YCBCR444 */
		vin_color = 0;
		vin_bpp   = 2;
		break;
	case 2:/* SDVT_VBYONE_24BPP_RGB */
		vin_color = 4;
		vin_bpp   = 1;
		break;
	case 3:/* SDVT_VBYONE_24BPP_YCBCR444 */
		vin_color = 0;
		vin_bpp   = 1;
		break;
	case 4:/* SDVT_VBYONE_30BPP_RGB */
		vin_color = 4;
		vin_bpp   = 0;
		break;
	case 5:/* SDVT_VBYONE_30BPP_YCBCR444 */
		vin_color = 0;
		vin_bpp   = 0;
		break;
	default:
		LCDERR("vbyone COLOR_FORMAT unsupport\n");
		return;
	}
#else
	vin_color = 4; /* fixed RGB */
	vin_bpp   = 0; /* fixed 30bbp 4:4:4 */
#endif

	/* set Vbyone vin color format */
	lcd_vcbus_setb(VBO_VIN_CTRL, vin_color, 8, 3);
	lcd_vcbus_setb(VBO_VIN_CTRL, vin_bpp, 11, 2);

	lcd_vbyone_lanes_set(lane_count, byte_mode, region_num, hsize, vsize);
	/*set hsync/vsync polarity to let the polarity is low active
	inside the VbyOne */
	lcd_vbyone_sync_pol(0, 0);

	/* below line copy from simulation */
	/* gate the input when vsync asserted */
	lcd_vcbus_setb(VBO_VIN_CTRL, 1, 0, 2);
	/* lcd_vcbus_write(VBO_VBK_CTRL_0,0x13);
	//lcd_vcbus_write(VBO_VBK_CTRL_1,0x56);
	//lcd_vcbus_write(VBO_HBK_CTRL,0x3478);
	//lcd_vcbus_setb(VBO_PXL_CTRL,0x2,0,4);
	//lcd_vcbus_setb(VBO_PXL_CTRL,0x3,VBO_PXL_CTR1_BIT,VBO_PXL_CTR1_WID);
	//set_vbyone_ctlbits(1,0,0); */

	/* PAD select: */
	if ((lane_count == 1) || (lane_count == 2))
		lcd_vcbus_setb(LCD_PORT_SWAP, 1, 9, 2);
	else if (lane_count == 4)
		lcd_vcbus_setb(LCD_PORT_SWAP, 2, 9, 2);
	else
		lcd_vcbus_setb(LCD_PORT_SWAP, 0, 9, 2);
	/* lcd_vcbus_setb(LCD_PORT_SWAP, 1, 8, 1);//reverse lane output order */

	if (pconf->lcd_control.vbyone_config->vx1_sw_filter_en) {
		/* hpd */
		/*lcd_vcbus_setb(VBO_INSGN_CTRL, 0, 3, 1);
		lcd_vcbus_setb(VBO_INSGN_CTRL, 1, 2, 1);*/
		/* lockn */
		/*lcd_vcbus_setb(VBO_INSGN_CTRL, 1, 1, 1);
		lcd_vcbus_setb(VBO_INSGN_CTRL, 1, 0, 1);*/
	}

	/* Mux pads in combo-phy: 0 for dsi; 1 for lvds or vbyone; 2 for edp */
	lcd_hiu_write(HHI_DSI_LVDS_EDP_CNTL0, 0x1);

	/* set hpd & lockn hw filter */
	lcd_vcbus_write(VBO_INFILTER_CTRL, 0xff77);
	lcd_vcbus_setb(VBO_INSGN_CTRL, 0, 2, 2);

	lcd_vcbus_setb(VBO_CTRL_L, 1, 0, 1);

	/*force vencl clk enable, otherwise, it might auto turn off by mipi DSI
	//lcd_vcbus_setb(VPU_MISC_CTRL, 1, 0, 1); */

	lcd_vbyone_wait_timing_stable();
	lcd_vbyone_sw_reset();

	if ((pconf->lcd_control.vbyone_config->ctrl_flag) & 0x4) /* training hold */
		lcd_vbyone_cdr_training_hold(pconf->lcd_control.vbyone_config, 1);
}

static void lcd_vbyone_disable(void)
{
	struct aml_lcd_drv_s *lcd_drv = aml_lcd_get_driver();

	lcd_vcbus_setb(VBO_CTRL_L, 0, 0, 1);
	switch (lcd_drv->chip_type) {
	case LCD_CHIP_TXL:
	case LCD_CHIP_TXLX:
		lcd_vcbus_setb(VBO_INSGN_CTRL, 0, 2, 1);
		lcd_vcbus_setb(VBO_INSGN_CTRL, 0, 0, 1);
		break;
	default:
		break;
	}
}

#define VX1_LOCKN_DETECT_FSM       0
#define VX1_LOCKN_DETECT_GPIO      1
#define VX1_LOCKN_DETECT_METHOD    VX1_LOCKN_DETECT_FSM
static void lcd_vbyone_wait_sw_lockn(struct vbyone_config_s *vx1_conf)
{
	int i = 0, j = 0;
	int ret = 1, lockn = 0;

#if (VX1_LOCKN_DETECT_METHOD == VX1_LOCKN_DETECT_FSM)
	lcd_vcbus_setb(VBO_INSGN_CTRL, 0, 0, 1);
#endif
	while (i++ < vx1_conf->vx1_sw_cdr_timeout_cnt) {
		j = 0;
		lockn = 0;
		while (j++ < vx1_conf->vx1_sw_cdr_detect_cnt) {
#if (VX1_LOCKN_DETECT_METHOD == VX1_LOCKN_DETECT_FSM)
			//ret = (lcd_vcbus_read(VBO_STATUS_L) >> 7) & 1;
			ret = lcd_vcbus_read(VBO_STATUS_L) & 0x3f;
			if (ret == 0x20)
				ret = 0;
			else
				ret = 1;
#else
			ret = lcd_vbyone_get_lockn_gpio();
#endif
			lockn += ret;
			udelay(vx1_conf->vx1_sw_cdr_detect_time);
		}
		if (lockn == 0)
			break;
	}
	/* lockn */
	lcd_vcbus_setb(VBO_INSGN_CTRL, 0, 1, 1);
#if (VX1_LOCKN_DETECT_METHOD == VX1_LOCKN_DETECT_FSM)
	lcd_vcbus_setb(VBO_INSGN_CTRL, 1, 0, 1);
#endif
	mdelay(5);
	LCDPR("%s: %d, i=%d\n", __func__, lockn, i);
}

static void lcd_vbyone_sw_lockn(struct lcd_config_s *pconf)
{
	struct aml_lcd_drv_s *lcd_drv = aml_lcd_get_driver();
	struct vbyone_config_s *vx1_conf = pconf->lcd_control.vbyone_config;
	int i, ret;

	switch (lcd_drv->chip_type) {
	case LCD_CHIP_TXL:
	case LCD_CHIP_TXLX:
		/* step 1: detect training lock */
		lcd_vbyone_wait_sw_lockn(vx1_conf);
		mdelay(vx1_conf->vx1_sw_filter_retry_delay);
		/* step 2: detect lockn noise */
		for (i = 0; i < vx1_conf->vx1_sw_filter_retry_cnt; i++) {
			ret = lcd_vbyone_sw_fliter(vx1_conf);
			if (ret) {
				lcd_vcbus_setb(VBO_INSGN_CTRL, ret, 1, 1);
				if (vx1_conf->vx1_sw_filter_en == 2)
					lcd_vbyone_sw_reset();
				lcd_vbyone_wait_sw_lockn(vx1_conf);
			}
			mdelay(vx1_conf->vx1_sw_filter_retry_delay);
		}
		break;
	default:
		break;
	}
}

#define VX1_LOCKN_WAIT_TIMEOUT    500 /* 500ms */
static void lcd_vbyone_wait_stable(struct lcd_config_s *pconf)
{
	int i = 0;
	int ret = 1;

	if (pconf->lcd_control.vbyone_config->vx1_sw_filter_en) {
		lcd_vbyone_sw_lockn(pconf);
		LCDPR("%s status: 0x%x, i=%d\n", __func__, lcd_vcbus_read(VBO_STATUS_L), i);
	} else {
		if ((pconf->lcd_control.vbyone_config->ctrl_flag) & 0x4) /* training hold */
			lcd_vbyone_cdr_training_hold(pconf->lcd_control.vbyone_config, 0);
		while (i++ < VX1_LOCKN_WAIT_TIMEOUT) {
			ret = lcd_vcbus_read(VBO_STATUS_L) & 0x3f;
			if (ret == 0x20)
				break;
			mdelay(1);
		}
		LCDPR("%s status: 0x%x, i=%d\n", __func__, lcd_vcbus_read(VBO_STATUS_L), i);
		if ((pconf->lcd_control.vbyone_config->ctrl_flag) & 0x1) { /* power on reset */
			LCDPR("ctrl_flag for power on reset\n");
			mdelay(pconf->lcd_control.vbyone_config->power_on_reset_delay);
			lcd_vbyone_sw_reset();
		}
	}
}

static void lcd_vbyone_sw_hpd(void)
{
	struct aml_lcd_drv_s *lcd_drv = aml_lcd_get_driver();

	switch (lcd_drv->chip_type) {
	case LCD_CHIP_TXL:
	case LCD_CHIP_TXLX:
		/* hpd */
		lcd_vcbus_setb(VBO_INSGN_CTRL, 0, 3, 1);
		lcd_vcbus_setb(VBO_INSGN_CTRL, 1, 2, 1);
		/* lockn */
#if (VX1_LOCKN_DETECT_METHOD == VX1_LOCKN_DETECT_GPIO)
		lcd_vcbus_setb(VBO_INSGN_CTRL, 1, 1, 1);
		lcd_vcbus_setb(VBO_INSGN_CTRL, 1, 0, 1);
#endif
		break;
	default:
		break;
	}
}

#define VX1_HPD_WAIT_TIMEOUT    5000 /* 500ms */
static void lcd_vbyone_wait_hpd(struct lcd_config_s *pconf)
{
	int i = 0;
	int ret = 1;

	LCDPR("%s:", __func__);
#if 0
	if (vx1_sw_filter_en > 0) {
		while (i++ < VX1_HPD_WAIT_TIMEOUT) {
			ret = lcd_vbyone_get_hpd_gpio();
			if (ret == 0)
				break;
			mdelay(1);
		}
		if (ret)
			LCDPR("%s: hpd=%d\n", __func__, ret);
		else
			LCDPR("%s: hpd=%d, i=%d\n", __func__, ret, i);
	} else {
		while (i++ < VX1_HPD_WAIT_TIMEOUT) {
			ret = (lcd_vcbus_read(VBO_STATUS_L) >> 6) & 1;
			if (ret == 0)
				break;
			mdelay(1);
		}
		if (ret)
			LCDPR("%s: hpd=%d\n", __func__,
				((lcd_vcbus_read(VBO_STATUS_L) >> 6) & 0x1));
		else
			LCDPR("%s: hpd=%d, i=%d\n", __func__,
				((lcd_vcbus_read(VBO_STATUS_L) >> 6) & 0x1), i);
	}
#else
	while (i++ < VX1_HPD_WAIT_TIMEOUT) {
		ret = (lcd_vcbus_read(VBO_STATUS_L) >> 6) & 1;
		if (ret == 0)
			break;
		udelay(100);
	}
	if (ret)
		printf("hpd=%d\n", ((lcd_vcbus_read(VBO_STATUS_L) >> 6) & 1));
	else {
		printf("hpd=%d, i=%d\n", ((lcd_vcbus_read(VBO_STATUS_L) >> 6) & 1), i);
		if (pconf->lcd_control.vbyone_config->vx1_sw_filter_en)
			lcd_vbyone_sw_hpd();
	}
#endif
	/* musk htpd */
	lcd_vcbus_setb(VBO_INSGN_CTRL, 1, 2, 2);

	if ((pconf->lcd_control.vbyone_config->ctrl_flag) & 0x2) {
		LCDPR("ctrl_flag for hpd_data delay\n");
		mdelay(pconf->lcd_control.vbyone_config->hpd_data_delay);
	} else {
		mdelay(10); /* add 10ms delay for compatibility */
	}
}

static unsigned int vbyone_lane_num[] = {
	1,
	2,
	4,
	8,
	8,
};

#define VBYONE_BIT_RATE_MAX		3100 //MHz
#define VBYONE_BIT_RATE_MIN		600
static void lcd_vbyone_config_set(struct lcd_config_s *pconf)
{
	unsigned int band_width, bit_rate, pclk, phy_div;
	unsigned int byte_mode, lane_count, minlane;
	unsigned int temp, i;

	if (lcd_debug_print_flag)
		LCDPR("%s\n", __func__);

	//auto calculate bandwidth, clock
	lane_count = pconf->lcd_control.vbyone_config->lane_count;
	byte_mode = pconf->lcd_control.vbyone_config->byte_mode;
	/* byte_mode * byte2bit * 8/10_encoding * pclk =
	   byte_mode * 8 * 10 / 8 * pclk */
	pclk = pconf->lcd_timing.lcd_clk / 1000; /* kHz */
	band_width = byte_mode * 10 * pclk;

	temp = VBYONE_BIT_RATE_MAX * 1000;
	temp = (band_width + temp - 1) / temp;
	for (i = 0; i < 4; i++) {
		if (temp <= vbyone_lane_num[i])
			break;
	}
	minlane = vbyone_lane_num[i];
	if (lane_count < minlane) {
		LCDERR("vbyone lane_num(%d) is less than min(%d)\n",
			lane_count, minlane);
		lane_count = minlane;
		pconf->lcd_control.vbyone_config->lane_count = lane_count;
		LCDPR("change to min lane_num %d\n", minlane);
	}

	bit_rate = band_width / minlane;
	phy_div = lane_count / minlane;
	if (phy_div == 8) {
		phy_div /= 2;
		bit_rate /= 2;
	}
	if (bit_rate > (VBYONE_BIT_RATE_MAX * 1000)) {
		LCDERR("vbyone bit rate(%dKHz) is out of max(%dKHz)\n",
			bit_rate, (VBYONE_BIT_RATE_MAX * 1000));
	}
	if (bit_rate < (VBYONE_BIT_RATE_MIN * 1000)) {
		LCDERR("vbyone bit rate(%dKHz) is out of min(%dKHz)\n",
			bit_rate, (VBYONE_BIT_RATE_MIN * 1000));
	}
	bit_rate = bit_rate * 1000; /* Hz */

	pconf->lcd_control.vbyone_config->phy_div = phy_div;
	pconf->lcd_control.vbyone_config->bit_rate = bit_rate;

	if (lcd_debug_print_flag) {
		LCDPR("lane_count=%u, bit_rate = %uMHz, pclk=%u.%03uMhz\n",
			lane_count, (bit_rate / 1000000),
			(pclk / 1000), (pclk % 1000));
	}
}

static void lcd_mlvds_config_set(struct lcd_config_s *pconf)
{
	unsigned int bit_rate, pclk;
	unsigned int lcd_bits, channel_num;
	unsigned int channel_sel0, channel_sel1, pi_clk_sel;
	unsigned int i, temp;

	if (lcd_debug_print_flag)
		LCDPR("%s\n", __func__);

	lcd_bits = pconf->lcd_basic.lcd_bits;
	channel_num = pconf->lcd_control.mlvds_config->channel_num;
	pclk = pconf->lcd_timing.lcd_clk / 1000;
	bit_rate = lcd_bits * 3 * pclk / channel_num;

	pconf->lcd_control.mlvds_config->bit_rate = bit_rate * 1000;

	if (lcd_debug_print_flag) {
		LCDPR("channel_num=%u, bit_rate=%u.%03uMHz, pclk=%u.%03uMhz\n",
			channel_num, (bit_rate / 1000), (bit_rate % 1000),
			(pclk / 1000), (pclk % 1000));
	}

	/* pi_clk select */
	/* mlvds channel:    //tx 10 channels
	 *    0: d0_a
	 *    1: d1_a
	 *    2: d2_a
	 *    3: clk_a
	 *    4: d0_b
	 *    5: d1_b
	 *    6: d2_b
	 *    7: clk_b */
	channel_sel0 = pconf->lcd_control.mlvds_config->channel_sel0;
	channel_sel1 = pconf->lcd_control.mlvds_config->channel_sel1;
	pi_clk_sel = 0;
	for (i = 0; i < 8; i++) {
		temp = (channel_sel0 >> (i*4)) & 0xf;
		if ((temp == 3) || (temp == 7))
			pi_clk_sel |= (1 << i);
	}
	for (i = 0; i < 2; i++) {
		temp = (channel_sel1 >> (i*4)) & 0xf;
		if ((temp == 3) || (temp == 7))
			pi_clk_sel |= (1 << (i + 8));
	}
	pconf->lcd_control.mlvds_config->pi_clk_sel = pi_clk_sel;
	if (lcd_debug_print_flag) {
		LCDPR("channel_sel0=0x%08x, channel_sel1=0x%08x, pi_clk_sel=0x%03x\n",
			channel_sel0, channel_sel1, pi_clk_sel);
	}
}

void lcd_tv_config_update(struct lcd_config_s *pconf)
{
	/* update interface timing */
	switch (pconf->lcd_basic.lcd_type) {
	case LCD_VBYONE:
		lcd_vbyone_config_set(pconf);
		break;
	case LCD_MLVDS:
		lcd_mlvds_config_set(pconf);
		break;
	default:
		break;
	}
}

void lcd_tv_driver_init_pre(void)
{
	struct aml_lcd_drv_s *lcd_drv = aml_lcd_get_driver();
	struct lcd_config_s *pconf;
	int ret;

	pconf = lcd_drv->lcd_config;
	LCDPR("tv driver init(ver %s): %s\n", lcd_drv->version,
		lcd_type_type_to_str(pconf->lcd_basic.lcd_type));
	ret = lcd_type_supported(pconf);
	if (ret)
		return;

	lcd_clk_set(pconf);
	lcd_venc_set(pconf);
	lcd_encl_tcon_set(pconf);
}

int lcd_tv_driver_init(void)
{
	struct aml_lcd_drv_s *lcd_drv = aml_lcd_get_driver();
	struct lcd_config_s *pconf;
	int ret;

	pconf = lcd_drv->lcd_config;
	ret = lcd_type_supported(pconf);
	if (ret)
		return -1;

	/* init driver */
	switch (pconf->lcd_basic.lcd_type) {
	case LCD_LVDS:
		lcd_lvds_control_set(pconf);
		lcd_lvds_phy_set(pconf, 1);
		break;
	case LCD_VBYONE:
		lcd_pinmux_set(1);
		lcd_vbyone_control_set(pconf);
		lcd_vbyone_wait_hpd(pconf);
		lcd_vbyone_phy_set(pconf, 1);
		lcd_vbyone_wait_stable(pconf);
		break;
	case LCD_MLVDS:
		lcd_mlvds_control_set(pconf);
		lcd_pinmux_set(1);
		lcd_mlvds_phy_set(pconf, 1);
		break;
	default:
		break;
	}

	lcd_vcbus_write(VENC_INTCTRL, 0x200);

	if (lcd_debug_print_flag)
		LCDPR("%s finished\n", __func__);
	return 0;
}

void lcd_tv_driver_disable(void)
{
	struct aml_lcd_drv_s *lcd_drv = aml_lcd_get_driver();
	struct lcd_config_s *pconf;
	int ret;

	LCDPR("disable driver\n");
	pconf = lcd_drv->lcd_config;
	ret = lcd_type_supported(pconf);
	if (ret)
		return;

	switch (pconf->lcd_basic.lcd_type) {
	case LCD_LVDS:
		lcd_lvds_phy_set(pconf, 0);
		lcd_lvds_disable();
		break;
	case LCD_VBYONE:
		lcd_vbyone_phy_set(pconf, 0);
		lcd_pinmux_set(0);
		lcd_vbyone_disable();
		break;
	case LCD_MLVDS:
		lcd_mlvds_disable();
		lcd_mlvds_phy_set(pconf, 0);
		lcd_pinmux_set(0);
		break;
	default:
		break;
	}

	lcd_vcbus_write(ENCL_VIDEO_EN, 0);

	lcd_clk_disable();

	if (lcd_debug_print_flag)
		LCDPR("%s finished\n", __func__);
}