drivers/i2c/designware_i2c.c - u-boot - Git at Google

 /*
  * (C) Copyright 2009
  * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <i2c.h>
 #include <asm/io.h>
 #include "designware_i2c.h"

 static struct i2c_regs *i2c_get_base(struct i2c_adapter *adap)
 {
 	switch (adap->hwadapnr) {
 #if CONFIG_SYS_I2C_BUS_MAX >= 4
 	case 3:
 		return (struct i2c_regs *)CONFIG_SYS_I2C_BASE3;
 #endif
 #if CONFIG_SYS_I2C_BUS_MAX >= 3
 	case 2:
 		return (struct i2c_regs *)CONFIG_SYS_I2C_BASE2;
 #endif
 #if CONFIG_SYS_I2C_BUS_MAX >= 2
 	case 1:
 		return (struct i2c_regs *)CONFIG_SYS_I2C_BASE1;
 #endif
 	case 0:
 		return (struct i2c_regs *)CONFIG_SYS_I2C_BASE;
 	default:
 		printf("Wrong I2C-adapter number %d\n", adap->hwadapnr);
 	}

 	return NULL;
 }

 /*
  * set_speed - Set the i2c speed mode (standard, high, fast)
  * @i2c_spd:	required i2c speed mode
  *
  * Set the i2c speed mode (standard, high, fast)
  */
 static void set_speed(struct i2c_adapter *adap, int i2c_spd)
 {
 	struct i2c_regs *i2c_base = i2c_get_base(adap);
 	unsigned int cntl;
 	unsigned int hcnt, lcnt;
 	unsigned int enbl;

 	/* to set speed cltr must be disabled */
 	enbl = readl(&i2c_base->ic_enable);
 	enbl &= ~IC_ENABLE_0B;
 	writel(enbl, &i2c_base->ic_enable);

 	cntl = (readl(&i2c_base->ic_con) & (~IC_CON_SPD_MSK));

 	switch (i2c_spd) {
 	case IC_SPEED_MODE_MAX:
 		cntl |= IC_CON_SPD_HS;
 		hcnt = (IC_CLK * MIN_HS_SCL_HIGHTIME) / NANO_TO_MICRO;
 		writel(hcnt, &i2c_base->ic_hs_scl_hcnt);
 		lcnt = (IC_CLK * MIN_HS_SCL_LOWTIME) / NANO_TO_MICRO;
 		writel(lcnt, &i2c_base->ic_hs_scl_lcnt);
 		break;

 	case IC_SPEED_MODE_STANDARD:
 		cntl |= IC_CON_SPD_SS;
 		hcnt = (IC_CLK * MIN_SS_SCL_HIGHTIME) / NANO_TO_MICRO;
 		writel(hcnt, &i2c_base->ic_ss_scl_hcnt);
 		lcnt = (IC_CLK * MIN_SS_SCL_LOWTIME) / NANO_TO_MICRO;
 		writel(lcnt, &i2c_base->ic_ss_scl_lcnt);
 		break;

 	case IC_SPEED_MODE_FAST:
 	default:
 		cntl |= IC_CON_SPD_FS;
 		hcnt = (IC_CLK * MIN_FS_SCL_HIGHTIME) / NANO_TO_MICRO;
 		writel(hcnt, &i2c_base->ic_fs_scl_hcnt);
 		lcnt = (IC_CLK * MIN_FS_SCL_LOWTIME) / NANO_TO_MICRO;
 		writel(lcnt, &i2c_base->ic_fs_scl_lcnt);
 		break;
 	}

 	writel(cntl, &i2c_base->ic_con);

 	/* Enable back i2c now speed set */
 	enbl |= IC_ENABLE_0B;
 	writel(enbl, &i2c_base->ic_enable);
 }

 /*
  * i2c_set_bus_speed - Set the i2c speed
  * @speed:	required i2c speed
  *
  * Set the i2c speed.
  */
 static unsigned int dw_i2c_set_bus_speed(struct i2c_adapter *adap,
 					 unsigned int speed)
 {
 	int i2c_spd;

 	if (speed >= I2C_MAX_SPEED)
 		i2c_spd = IC_SPEED_MODE_MAX;
 	else if (speed >= I2C_FAST_SPEED)
 		i2c_spd = IC_SPEED_MODE_FAST;
 	else
 		i2c_spd = IC_SPEED_MODE_STANDARD;

 	set_speed(adap, i2c_spd);
 	adap->speed = speed;

 	return 0;
 }

 /*
  * i2c_init - Init function
  * @speed:	required i2c speed
  * @slaveaddr:	slave address for the device
  *
  * Initialization function.
  */
 static void dw_i2c_init(struct i2c_adapter *adap, int speed,
 			int slaveaddr)
 {
 	struct i2c_regs *i2c_base = i2c_get_base(adap);
 	unsigned int enbl;

 	/* Disable i2c */
 	enbl = readl(&i2c_base->ic_enable);
 	enbl &= ~IC_ENABLE_0B;
 	writel(enbl, &i2c_base->ic_enable);

 	writel((IC_CON_SD | IC_CON_SPD_FS | IC_CON_MM), &i2c_base->ic_con);
 	writel(IC_RX_TL, &i2c_base->ic_rx_tl);
 	writel(IC_TX_TL, &i2c_base->ic_tx_tl);
 	dw_i2c_set_bus_speed(adap, speed);
 	writel(IC_STOP_DET, &i2c_base->ic_intr_mask);
 	writel(slaveaddr, &i2c_base->ic_sar);

 	/* Enable i2c */
 	enbl = readl(&i2c_base->ic_enable);
 	enbl |= IC_ENABLE_0B;
 	writel(enbl, &i2c_base->ic_enable);
 }

 /*
  * i2c_setaddress - Sets the target slave address
  * @i2c_addr:	target i2c address
  *
  * Sets the target slave address.
  */
 static void i2c_setaddress(struct i2c_adapter *adap, unsigned int i2c_addr)
 {
 	struct i2c_regs *i2c_base = i2c_get_base(adap);
 	unsigned int enbl;

 	/* Disable i2c */
 	enbl = readl(&i2c_base->ic_enable);
 	enbl &= ~IC_ENABLE_0B;
 	writel(enbl, &i2c_base->ic_enable);

 	writel(i2c_addr, &i2c_base->ic_tar);

 	/* Enable i2c */
 	enbl = readl(&i2c_base->ic_enable);
 	enbl |= IC_ENABLE_0B;
 	writel(enbl, &i2c_base->ic_enable);
 }

 /*
  * i2c_flush_rxfifo - Flushes the i2c RX FIFO
  *
  * Flushes the i2c RX FIFO
  */
 static void i2c_flush_rxfifo(struct i2c_adapter *adap)
 {
 	struct i2c_regs *i2c_base = i2c_get_base(adap);

 	while (readl(&i2c_base->ic_status) & IC_STATUS_RFNE)
 		readl(&i2c_base->ic_cmd_data);
 }

 /*
  * i2c_wait_for_bb - Waits for bus busy
  *
  * Waits for bus busy
  */
 static int i2c_wait_for_bb(struct i2c_adapter *adap)
 {
 	struct i2c_regs *i2c_base = i2c_get_base(adap);
 	unsigned long start_time_bb = get_timer(0);

 	while ((readl(&i2c_base->ic_status) & IC_STATUS_MA) ||
 	       !(readl(&i2c_base->ic_status) & IC_STATUS_TFE)) {

 		/* Evaluate timeout */
 		if (get_timer(start_time_bb) > (unsigned long)(I2C_BYTE_TO_BB))
 			return 1;
 	}

 	return 0;
 }

 static int i2c_xfer_init(struct i2c_adapter *adap, uchar chip, uint addr,
 			 int alen)
 {
 	struct i2c_regs *i2c_base = i2c_get_base(adap);

 	if (i2c_wait_for_bb(adap))
 		return 1;

 	i2c_setaddress(adap, chip);
 	while (alen) {
 		alen--;
 		/* high byte address going out first */
 		writel((addr >> (alen * 8)) & 0xff,
 		       &i2c_base->ic_cmd_data);
 	}
 	return 0;
 }

 static int i2c_xfer_finish(struct i2c_adapter *adap)
 {
 	struct i2c_regs *i2c_base = i2c_get_base(adap);
 	ulong start_stop_det = get_timer(0);

 	while (1) {
 		if ((readl(&i2c_base->ic_raw_intr_stat) & IC_STOP_DET)) {
 			readl(&i2c_base->ic_clr_stop_det);
 			break;
 		} else if (get_timer(start_stop_det) > I2C_STOPDET_TO) {
 			break;
 		}
 	}

 	if (i2c_wait_for_bb(adap)) {
 		printf("Timed out waiting for bus\n");
 		return 1;
 	}

 	i2c_flush_rxfifo(adap);

 	return 0;
 }

 /*
  * i2c_read - Read from i2c memory
  * @chip:	target i2c address
  * @addr:	address to read from
  * @alen:
  * @buffer:	buffer for read data
  * @len:	no of bytes to be read
  *
  * Read from i2c memory.
  */
 static int dw_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr,
 		       int alen, u8 *buffer, int len)
 {
 	struct i2c_regs *i2c_base = i2c_get_base(adap);
 	unsigned long start_time_rx;

 #ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones
 	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
 	 * address and the extra bits end up in the "chip address"
 	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
 	 * four 256 byte chips.
 	 *
 	 * Note that we consider the length of the address field to
 	 * still be one byte because the extra address bits are
 	 * hidden in the chip address.
 	 */
 	dev |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 	addr &= ~(CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW << (alen * 8));

 	debug("%s: fix addr_overflow: dev %02x addr %02x\n", __func__, dev,
 	      addr);
 #endif

 	if (i2c_xfer_init(adap, dev, addr, alen))
 		return 1;

 	start_time_rx = get_timer(0);
 	while (len) {
 		if (len == 1)
 			writel(IC_CMD | IC_STOP, &i2c_base->ic_cmd_data);
 		else
 			writel(IC_CMD, &i2c_base->ic_cmd_data);

 		if (readl(&i2c_base->ic_status) & IC_STATUS_RFNE) {
 			*buffer++ = (uchar)readl(&i2c_base->ic_cmd_data);
 			len--;
 			start_time_rx = get_timer(0);

 		} else if (get_timer(start_time_rx) > I2C_BYTE_TO) {
 				return 1;
 		}
 	}

 	return i2c_xfer_finish(adap);
 }

 /*
  * i2c_write - Write to i2c memory
  * @chip:	target i2c address
  * @addr:	address to read from
  * @alen:
  * @buffer:	buffer for read data
  * @len:	no of bytes to be read
  *
  * Write to i2c memory.
  */
 static int dw_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr,
 			int alen, u8 *buffer, int len)
 {
 	struct i2c_regs *i2c_base = i2c_get_base(adap);
 	int nb = len;
 	unsigned long start_time_tx;

 #ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones
 	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
 	 * address and the extra bits end up in the "chip address"
 	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
 	 * four 256 byte chips.
 	 *
 	 * Note that we consider the length of the address field to
 	 * still be one byte because the extra address bits are
 	 * hidden in the chip address.
 	 */
 	dev |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 	addr &= ~(CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW << (alen * 8));

 	debug("%s: fix addr_overflow: dev %02x addr %02x\n", __func__, dev,
 	      addr);
 #endif

 	if (i2c_xfer_init(adap, dev, addr, alen))
 		return 1;

 	start_time_tx = get_timer(0);
 	while (len) {
 		if (readl(&i2c_base->ic_status) & IC_STATUS_TFNF) {
 			if (--len == 0) {
 				writel(*buffer | IC_STOP,
 				       &i2c_base->ic_cmd_data);
 			} else {
 				writel(*buffer, &i2c_base->ic_cmd_data);
 			}
 			buffer++;
 			start_time_tx = get_timer(0);

 		} else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) {
 				printf("Timed out. i2c write Failed\n");
 				return 1;
 		}
 	}

 	return i2c_xfer_finish(adap);
 }

 /*
  * i2c_probe - Probe the i2c chip
  */
 static int dw_i2c_probe(struct i2c_adapter *adap, u8 dev)
 {
 	u32 tmp;
 	int ret;

 	/*
 	 * Try to read the first location of the chip.
 	 */
 	ret = dw_i2c_read(adap, dev, 0, 1, (uchar *)&tmp, 1);
 	if (ret)
 		dw_i2c_init(adap, adap->speed, adap->slaveaddr);

 	return ret;
 }

 U_BOOT_I2C_ADAP_COMPLETE(dw_0, dw_i2c_init, dw_i2c_probe, dw_i2c_read,
 			 dw_i2c_write, dw_i2c_set_bus_speed,
 			 CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 0)

 #if CONFIG_SYS_I2C_BUS_MAX >= 2
 U_BOOT_I2C_ADAP_COMPLETE(dw_1, dw_i2c_init, dw_i2c_probe, dw_i2c_read,
 			 dw_i2c_write, dw_i2c_set_bus_speed,
 			 CONFIG_SYS_I2C_SPEED1, CONFIG_SYS_I2C_SLAVE1, 1)
 #endif

 #if CONFIG_SYS_I2C_BUS_MAX >= 3
 U_BOOT_I2C_ADAP_COMPLETE(dw_2, dw_i2c_init, dw_i2c_probe, dw_i2c_read,
 			 dw_i2c_write, dw_i2c_set_bus_speed,
 			 CONFIG_SYS_I2C_SPEED2, CONFIG_SYS_I2C_SLAVE2, 2)
 #endif

 #if CONFIG_SYS_I2C_BUS_MAX >= 4
 U_BOOT_I2C_ADAP_COMPLETE(dw_3, dw_i2c_init, dw_i2c_probe, dw_i2c_read,
 			 dw_i2c_write, dw_i2c_set_bus_speed,
 			 CONFIG_SYS_I2C_SPEED3, CONFIG_SYS_I2C_SLAVE3, 3)
 #endif
	/*
	* (C) Copyright 2009
	* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <i2c.h>
	#include <asm/io.h>
	#include "designware_i2c.h"

	static struct i2c_regs i2c_get_base(struct i2c_adapter adap)
	{
	switch (adap->hwadapnr) {
	#if CONFIG_SYS_I2C_BUS_MAX >= 4
	case 3:
	return (struct i2c_regs *)CONFIG_SYS_I2C_BASE3;
	#endif
	#if CONFIG_SYS_I2C_BUS_MAX >= 3
	case 2:
	return (struct i2c_regs *)CONFIG_SYS_I2C_BASE2;
	#endif
	#if CONFIG_SYS_I2C_BUS_MAX >= 2
	case 1:
	return (struct i2c_regs *)CONFIG_SYS_I2C_BASE1;
	#endif
	case 0:
	return (struct i2c_regs *)CONFIG_SYS_I2C_BASE;
	default:
	printf("Wrong I2C-adapter number %d\n", adap->hwadapnr);
	}

	return NULL;
	}

	/*
	* set_speed - Set the i2c speed mode (standard, high, fast)
	* @i2c_spd: required i2c speed mode
	*
	* Set the i2c speed mode (standard, high, fast)
	*/
	static void set_speed(struct i2c_adapter *adap, int i2c_spd)
	{
	struct i2c_regs *i2c_base = i2c_get_base(adap);
	unsigned int cntl;
	unsigned int hcnt, lcnt;
	unsigned int enbl;

	/* to set speed cltr must be disabled */
	enbl = readl(&i2c_base->ic_enable);
	enbl &= ~IC_ENABLE_0B;
	writel(enbl, &i2c_base->ic_enable);

	cntl = (readl(&i2c_base->ic_con) & (~IC_CON_SPD_MSK));

	switch (i2c_spd) {
	case IC_SPEED_MODE_MAX:
	cntl \|= IC_CON_SPD_HS;
	hcnt = (IC_CLK * MIN_HS_SCL_HIGHTIME) / NANO_TO_MICRO;
	writel(hcnt, &i2c_base->ic_hs_scl_hcnt);
	lcnt = (IC_CLK * MIN_HS_SCL_LOWTIME) / NANO_TO_MICRO;
	writel(lcnt, &i2c_base->ic_hs_scl_lcnt);
	break;

	case IC_SPEED_MODE_STANDARD:
	cntl \|= IC_CON_SPD_SS;
	hcnt = (IC_CLK * MIN_SS_SCL_HIGHTIME) / NANO_TO_MICRO;
	writel(hcnt, &i2c_base->ic_ss_scl_hcnt);
	lcnt = (IC_CLK * MIN_SS_SCL_LOWTIME) / NANO_TO_MICRO;
	writel(lcnt, &i2c_base->ic_ss_scl_lcnt);
	break;

	case IC_SPEED_MODE_FAST:
	default:
	cntl \|= IC_CON_SPD_FS;
	hcnt = (IC_CLK * MIN_FS_SCL_HIGHTIME) / NANO_TO_MICRO;
	writel(hcnt, &i2c_base->ic_fs_scl_hcnt);
	lcnt = (IC_CLK * MIN_FS_SCL_LOWTIME) / NANO_TO_MICRO;
	writel(lcnt, &i2c_base->ic_fs_scl_lcnt);
	break;
	}

	writel(cntl, &i2c_base->ic_con);

	/* Enable back i2c now speed set */
	enbl \|= IC_ENABLE_0B;
	writel(enbl, &i2c_base->ic_enable);
	}

	/*
	* i2c_set_bus_speed - Set the i2c speed
	* @speed: required i2c speed
	*
	* Set the i2c speed.
	*/
	static unsigned int dw_i2c_set_bus_speed(struct i2c_adapter *adap,
	unsigned int speed)
	{
	int i2c_spd;

	if (speed >= I2C_MAX_SPEED)
	i2c_spd = IC_SPEED_MODE_MAX;
	else if (speed >= I2C_FAST_SPEED)
	i2c_spd = IC_SPEED_MODE_FAST;
	else
	i2c_spd = IC_SPEED_MODE_STANDARD;

	set_speed(adap, i2c_spd);
	adap->speed = speed;

	return 0;
	}

	/*
	* i2c_init - Init function
	* @speed: required i2c speed
	* @slaveaddr: slave address for the device
	*
	* Initialization function.
	*/
	static void dw_i2c_init(struct i2c_adapter *adap, int speed,
	int slaveaddr)
	{
	struct i2c_regs *i2c_base = i2c_get_base(adap);
	unsigned int enbl;

	/* Disable i2c */
	enbl = readl(&i2c_base->ic_enable);
	enbl &= ~IC_ENABLE_0B;
	writel(enbl, &i2c_base->ic_enable);

	writel((IC_CON_SD \| IC_CON_SPD_FS \| IC_CON_MM), &i2c_base->ic_con);
	writel(IC_RX_TL, &i2c_base->ic_rx_tl);
	writel(IC_TX_TL, &i2c_base->ic_tx_tl);
	dw_i2c_set_bus_speed(adap, speed);
	writel(IC_STOP_DET, &i2c_base->ic_intr_mask);
	writel(slaveaddr, &i2c_base->ic_sar);

	/* Enable i2c */
	enbl = readl(&i2c_base->ic_enable);
	enbl \|= IC_ENABLE_0B;
	writel(enbl, &i2c_base->ic_enable);
	}

	/*
	* i2c_setaddress - Sets the target slave address
	* @i2c_addr: target i2c address
	*
	* Sets the target slave address.
	*/
	static void i2c_setaddress(struct i2c_adapter *adap, unsigned int i2c_addr)
	{
	struct i2c_regs *i2c_base = i2c_get_base(adap);
	unsigned int enbl;

	/* Disable i2c */
	enbl = readl(&i2c_base->ic_enable);
	enbl &= ~IC_ENABLE_0B;
	writel(enbl, &i2c_base->ic_enable);

	writel(i2c_addr, &i2c_base->ic_tar);

	/* Enable i2c */
	enbl = readl(&i2c_base->ic_enable);
	enbl \|= IC_ENABLE_0B;
	writel(enbl, &i2c_base->ic_enable);
	}

	/*
	* i2c_flush_rxfifo - Flushes the i2c RX FIFO
	*
	* Flushes the i2c RX FIFO
	*/
	static void i2c_flush_rxfifo(struct i2c_adapter *adap)
	{
	struct i2c_regs *i2c_base = i2c_get_base(adap);

	while (readl(&i2c_base->ic_status) & IC_STATUS_RFNE)
	readl(&i2c_base->ic_cmd_data);
	}

	/*
	* i2c_wait_for_bb - Waits for bus busy
	*
	* Waits for bus busy
	*/
	static int i2c_wait_for_bb(struct i2c_adapter *adap)
	{
	struct i2c_regs *i2c_base = i2c_get_base(adap);
	unsigned long start_time_bb = get_timer(0);

	while ((readl(&i2c_base->ic_status) & IC_STATUS_MA) \|\|
	!(readl(&i2c_base->ic_status) & IC_STATUS_TFE)) {

	/* Evaluate timeout */
	if (get_timer(start_time_bb) > (unsigned long)(I2C_BYTE_TO_BB))
	return 1;
	}

	return 0;
	}

	static int i2c_xfer_init(struct i2c_adapter *adap, uchar chip, uint addr,
	int alen)
	{
	struct i2c_regs *i2c_base = i2c_get_base(adap);

	if (i2c_wait_for_bb(adap))
	return 1;

	i2c_setaddress(adap, chip);
	while (alen) {
	alen--;
	/* high byte address going out first */
	writel((addr >> (alen * 8)) & 0xff,
	&i2c_base->ic_cmd_data);
	}
	return 0;
	}

	static int i2c_xfer_finish(struct i2c_adapter *adap)
	{
	struct i2c_regs *i2c_base = i2c_get_base(adap);
	ulong start_stop_det = get_timer(0);

	while (1) {
	if ((readl(&i2c_base->ic_raw_intr_stat) & IC_STOP_DET)) {
	readl(&i2c_base->ic_clr_stop_det);
	break;
	} else if (get_timer(start_stop_det) > I2C_STOPDET_TO) {
	break;
	}
	}

	if (i2c_wait_for_bb(adap)) {
	printf("Timed out waiting for bus\n");
	return 1;
	}

	i2c_flush_rxfifo(adap);

	return 0;
	}

	/*
	* i2c_read - Read from i2c memory
	* @chip: target i2c address
	* @addr: address to read from
	* @alen:
	* @buffer: buffer for read data
	* @len: no of bytes to be read
	*
	* Read from i2c memory.
	*/
	static int dw_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr,
	int alen, u8 *buffer, int len)
	{
	struct i2c_regs *i2c_base = i2c_get_base(adap);
	unsigned long start_time_rx;

	#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
	/*
	* EEPROM chips that implement "address overflow" are ones
	* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
	* address and the extra bits end up in the "chip address"
	* bit slots. This makes a 24WC08 (1Kbyte) chip look like
	* four 256 byte chips.
	*
	* Note that we consider the length of the address field to
	* still be one byte because the extra address bits are
	* hidden in the chip address.
	*/
	dev \|= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
	addr &= ~(CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW << (alen * 8));

	debug("%s: fix addr_overflow: dev %02x addr %02x\n", __func__, dev,
	addr);
	#endif

	if (i2c_xfer_init(adap, dev, addr, alen))
	return 1;

	start_time_rx = get_timer(0);
	while (len) {
	if (len == 1)
	writel(IC_CMD \| IC_STOP, &i2c_base->ic_cmd_data);
	else
	writel(IC_CMD, &i2c_base->ic_cmd_data);

	if (readl(&i2c_base->ic_status) & IC_STATUS_RFNE) {
	*buffer++ = (uchar)readl(&i2c_base->ic_cmd_data);
	len--;
	start_time_rx = get_timer(0);

	} else if (get_timer(start_time_rx) > I2C_BYTE_TO) {
	return 1;
	}
	}

	return i2c_xfer_finish(adap);
	}

	/*
	* i2c_write - Write to i2c memory
	* @chip: target i2c address
	* @addr: address to read from
	* @alen:
	* @buffer: buffer for read data
	* @len: no of bytes to be read
	*
	* Write to i2c memory.
	*/
	static int dw_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr,
	int alen, u8 *buffer, int len)
	{
	struct i2c_regs *i2c_base = i2c_get_base(adap);
	int nb = len;
	unsigned long start_time_tx;

	#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
	/*
	* EEPROM chips that implement "address overflow" are ones
	* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
	* address and the extra bits end up in the "chip address"
	* bit slots. This makes a 24WC08 (1Kbyte) chip look like
	* four 256 byte chips.
	*
	* Note that we consider the length of the address field to
	* still be one byte because the extra address bits are
	* hidden in the chip address.
	*/
	dev \|= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
	addr &= ~(CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW << (alen * 8));

	debug("%s: fix addr_overflow: dev %02x addr %02x\n", __func__, dev,
	addr);
	#endif

	if (i2c_xfer_init(adap, dev, addr, alen))
	return 1;

	start_time_tx = get_timer(0);
	while (len) {
	if (readl(&i2c_base->ic_status) & IC_STATUS_TFNF) {
	if (--len == 0) {
	writel(*buffer \| IC_STOP,
	&i2c_base->ic_cmd_data);
	} else {
	writel(*buffer, &i2c_base->ic_cmd_data);
	}
	buffer++;
	start_time_tx = get_timer(0);

	} else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) {
	printf("Timed out. i2c write Failed\n");
	return 1;
	}
	}

	return i2c_xfer_finish(adap);
	}

	/*
	* i2c_probe - Probe the i2c chip
	*/
	static int dw_i2c_probe(struct i2c_adapter *adap, u8 dev)
	{
	u32 tmp;
	int ret;

	/*
	* Try to read the first location of the chip.
	*/
	ret = dw_i2c_read(adap, dev, 0, 1, (uchar *)&tmp, 1);
	if (ret)
	dw_i2c_init(adap, adap->speed, adap->slaveaddr);

	return ret;
	}

	U_BOOT_I2C_ADAP_COMPLETE(dw_0, dw_i2c_init, dw_i2c_probe, dw_i2c_read,
	dw_i2c_write, dw_i2c_set_bus_speed,
	CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 0)

	#if CONFIG_SYS_I2C_BUS_MAX >= 2
	U_BOOT_I2C_ADAP_COMPLETE(dw_1, dw_i2c_init, dw_i2c_probe, dw_i2c_read,
	dw_i2c_write, dw_i2c_set_bus_speed,
	CONFIG_SYS_I2C_SPEED1, CONFIG_SYS_I2C_SLAVE1, 1)
	#endif

	#if CONFIG_SYS_I2C_BUS_MAX >= 3
	U_BOOT_I2C_ADAP_COMPLETE(dw_2, dw_i2c_init, dw_i2c_probe, dw_i2c_read,
	dw_i2c_write, dw_i2c_set_bus_speed,
	CONFIG_SYS_I2C_SPEED2, CONFIG_SYS_I2C_SLAVE2, 2)
	#endif

	#if CONFIG_SYS_I2C_BUS_MAX >= 4
	U_BOOT_I2C_ADAP_COMPLETE(dw_3, dw_i2c_init, dw_i2c_probe, dw_i2c_read,
	dw_i2c_write, dw_i2c_set_bus_speed,
	CONFIG_SYS_I2C_SPEED3, CONFIG_SYS_I2C_SLAVE3, 3)
	#endif