)]}'
{
  "commit": "d67cce2dda3a40c3bd90a6c6e129fbb26dd4cfab",
  "tree": "8f063bfb4933c23040fc244182841997df31491f",
  "parents": [
    "cd85662b345c0c2248fd7637f65bb2fbb4d53dd9"
  ],
  "author": {
    "name": "kevin.morfitt@fearnside-systems.co.uk",
    "email": "kevin.morfitt@fearnside-systems.co.uk",
    "time": "Sat Oct 10 13:30:22 2009 +0900"
  },
  "committer": {
    "name": "Tom Rix",
    "email": "Tom.Rix@windriver.com",
    "time": "Tue Oct 13 21:13:56 2009 -0500"
  },
  "message": "Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code\n\nThis patch re-formats the code in cpu/arm920t and cpu/arm920t/23c24x0 in\npreparation for changes to add support for the Embest SBC2440-II Board.\n\nThe changes are as follows:\n- re-indent the code using Lindent\n- make sure register layouts are defined using a C struct\n- replace the upper-case typedef\u0027ed C struct names with lower case\n  non-typedef\u0027ed ones\n- make sure registers are accessed using the proper accessor functions\n- run checkpatch.pl and fix any error reports\n\nIt assumes the following patch has been applied first:\n- [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009\n\nTested on an Embest SBC2440-II Board with local u-boot patches as I don\u0027t have\nany s3c2400 or s3c2410 boards but need this patch applying before I can submit\npatches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets and no\nnew warnings or errors were found.\n\nSigned-off-by: Kevin Morfitt \u003ckevin.morfitt@fearnside-systems.co.uk\u003e\nSigned-off-by: Minkyu Kang \u003cmk7.kang@samsung.com\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "11ec95e12664947253bd041499b186a9a5b4d395",
      "old_mode": 33188,
      "old_path": "cpu/arm920t/s3c24x0/interrupts.c",
      "new_id": "91489461367b49b9177ffa030ad879b1ec2a6a93",
      "new_mode": 33188,
      "new_path": "cpu/arm920t/s3c24x0/interrupts.c"
    },
    {
      "type": "modify",
      "old_id": "e0dca62563503268c72521589a0124eb939dd76e",
      "old_mode": 33188,
      "old_path": "cpu/arm920t/s3c24x0/speed.c",
      "new_id": "136c7794a6f51325cc0556194da952eefd42406b",
      "new_mode": 33188,
      "new_path": "cpu/arm920t/s3c24x0/speed.c"
    },
    {
      "type": "modify",
      "old_id": "db472bf54feb4517e5907c19b8e0198927e96bea",
      "old_mode": 33188,
      "old_path": "cpu/arm920t/s3c24x0/timer.c",
      "new_id": "20cedd463967f2339736d110d50874541a5dbb56",
      "new_mode": 33188,
      "new_path": "cpu/arm920t/s3c24x0/timer.c"
    },
    {
      "type": "modify",
      "old_id": "9ccf5759642df2632fa495ac70556094d357dabc",
      "old_mode": 33188,
      "old_path": "cpu/arm920t/s3c24x0/usb.c",
      "new_id": "b5ba8c4f3a7091cc06533fcaebd9d54b374e3427",
      "new_mode": 33188,
      "new_path": "cpu/arm920t/s3c24x0/usb.c"
    },
    {
      "type": "modify",
      "old_id": "7838014bd4fc636473e6b12ef941c6b2c3990a5b",
      "old_mode": 33188,
      "old_path": "cpu/arm920t/s3c24x0/usb_ohci.c",
      "new_id": "7672e4ce110c901312d0e8949ba26cba1c7363aa",
      "new_mode": 33188,
      "new_path": "cpu/arm920t/s3c24x0/usb_ohci.c"
    },
    {
      "type": "modify",
      "old_id": "8e093fbfc640433eb871910d9b46c000153f826e",
      "old_mode": 33188,
      "old_path": "cpu/arm920t/s3c24x0/usb_ohci.h",
      "new_id": "f272d788592477bfbc5ce6f5408b71ea8958c26a",
      "new_mode": 33188,
      "new_path": "cpu/arm920t/s3c24x0/usb_ohci.h"
    },
    {
      "type": "modify",
      "old_id": "27f38b808917700a35ab683713cd3b8e7a3f7f15",
      "old_mode": 33188,
      "old_path": "cpu/arm920t/start.S",
      "new_id": "114427a16ed36c618711a3be2007a5ba8c18606e",
      "new_mode": 33188,
      "new_path": "cpu/arm920t/start.S"
    }
  ]
}