)]}'
{
  "commit": "d90859a67c0860bd24ee6fee7ab13f3db00929c4",
  "tree": "8e8ab105e89ab32381841a9433bfba7d850b7f83",
  "parents": [
    "7b89795f17c990263a17ecf25e447df16e379748"
  ],
  "author": {
    "name": "Alexander Holler",
    "email": "holler@ahsoftware.de",
    "time": "Tue Apr 19 09:30:35 2011 -0400"
  },
  "committer": {
    "name": "Albert ARIBAUD",
    "email": "albert.u.boot@aribaud.net",
    "time": "Wed Apr 27 19:38:09 2011 +0200"
  },
  "message": "omap3_beagle: enable EHCI and USB storage.\n\nThe reset sequence/configuration for ehci is highly board specific,\nso this will be done in the source for the board, instead of\nintroducing several CONFIG_* which would be needed to make those\nfew lines in beagle.c usable across different OMAP boards.\n\nSigned-off-by: Alexander Holler \u003choller@ahsoftware.de\u003e\nSigned-off-by: Sandeep Paulraj \u003cs-paulraj@ti.com\u003e\n",
  "tree_diff": [
    {
      "type": "add",
      "old_id": "0000000000000000000000000000000000000000",
      "old_mode": 0,
      "old_path": "/dev/null",
      "new_id": "cd01f50295a190a574f8deba7994533c340d1965",
      "new_mode": 33188,
      "new_path": "arch/arm/include/asm/arch-omap3/ehci_omap3.h"
    },
    {
      "type": "modify",
      "old_id": "9f4e3dc1f375e50707c4fb35cda4dee3430fafc3",
      "old_mode": 33188,
      "old_path": "board/ti/beagle/beagle.c",
      "new_id": "4e194a2d7b4a515a741858f8eef12f86d9e09932",
      "new_mode": 33188,
      "new_path": "board/ti/beagle/beagle.c"
    },
    {
      "type": "modify",
      "old_id": "2bf6c3a285709486d9849fb8e058913cfd3aaf86",
      "old_mode": 33188,
      "old_path": "include/configs/omap3_beagle.h",
      "new_id": "5191d149d0432308e7c4b83c5b4807554119f47f",
      "new_mode": 33188,
      "new_path": "include/configs/omap3_beagle.h"
    }
  ]
}