| /dts-v1/; | |
| / { | |
| compatible = "riscv32 nx25"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| interrupt-parent = <&intc>; | |
| aliases { | |
| uart0 = &serial0; | |
| ethernet0 = &mac0; | |
| spi0 = &spi; | |
| } ; | |
| chosen { | |
| bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0xf0300000 debug loglevel=7"; | |
| stdout-path = "uart0:38400n8"; | |
| tick-timer = &timer0; | |
| }; | |
| memory@0 { | |
| device_type = "memory"; | |
| reg = <0x00000000 0x40000000>; | |
| }; | |
| spiclk: virt_100mhz { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <100000000>; | |
| }; | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| cpu@0 { | |
| compatible = "andestech,n13"; | |
| reg = <0>; | |
| /* FIXME: to fill correct frqeuency */ | |
| clock-frequency = <60000000>; | |
| }; | |
| }; | |
| intc: interrupt-controller { | |
| compatible = "andestech,atnointc010"; | |
| #interrupt-cells = <1>; | |
| interrupt-controller; | |
| }; | |
| serial0: serial@f0300000 { | |
| compatible = "andestech,uart16550", "ns16550a"; | |
| reg = <0xf0300000 0x1000>; | |
| interrupts = <7 4>; | |
| clock-frequency = <19660800>; | |
| reg-shift = <2>; | |
| reg-offset = <32>; | |
| no-loopback-test = <1>; | |
| }; | |
| timer0: timer@f0400000 { | |
| compatible = "andestech,atcpit100"; | |
| reg = <0xf0400000 0x1000>; | |
| interrupts = <2 4>; | |
| clock-frequency = <40000000>; | |
| }; | |
| mac0: mac@e0100000 { | |
| compatible = "andestech,atmac100"; | |
| reg = <0xe0100000 0x1000>; | |
| interrupts = <25 4>; | |
| }; | |
| mmc0: mmc@f0e00000 { | |
| compatible = "andestech,atsdc010"; | |
| max-frequency = <100000000>; | |
| fifo-depth = <0x10>; | |
| reg = <0xf0e00000 0x1000>; | |
| interrupts = <17 4>; | |
| cap-sd-highspeed; | |
| }; | |
| spi: spi@f0b00000 { | |
| compatible = "andestech,atcspi200"; | |
| reg = <0xf0b00000 0x1000>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| num-cs = <1>; | |
| clocks = <&spiclk>; | |
| interrupts = <3 4>; | |
| flash@0 { | |
| compatible = "spi-flash"; | |
| spi-max-frequency = <50000000>; | |
| reg = <0>; | |
| spi-cpol; | |
| spi-cpha; | |
| }; | |
| }; | |
| }; |