diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index e17f182..5f2dfd0 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -126,7 +126,12 @@
 {
 	char tmp[64];	/* long enough for environment variables */
 	int i = getenv_f("baudrate", tmp, sizeof (tmp));
+
+#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
+	gd->baudrate = (i > 0)
+#else
 	gd->bd->bi_baudrate = gd->baudrate = (i > 0)
+#endif
 			? (int) simple_strtoul (tmp, NULL, 10)
 			: CONFIG_BAUDRATE;
 
@@ -137,7 +142,12 @@
 {
 	printf ("\n\n%s\n\n", version_string);
 	debug ("U-Boot code: %08lX -> %08lX  BSS: -> %08lX\n",
-	       _armboot_start, _bss_start, _bss_end);
+#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
+	       _TEXT_BASE,
+#else
+	       _armboot_start,
+#endif
+	       _bss_start, _bss_end);
 #ifdef CONFIG_MODEM_SUPPORT
 	debug ("Modem Support enabled\n");
 #endif
@@ -180,6 +190,7 @@
 	return (0);
 }
 
+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 #ifndef CONFIG_SYS_NO_FLASH
 static void display_flash_config (ulong size)
 {
@@ -187,6 +198,7 @@
 	print_size (size, "\n");
 }
 #endif /* CONFIG_SYS_NO_FLASH */
+#endif
 
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
 static int init_func_i2c (void)
@@ -234,6 +246,7 @@
 
 int print_cpuinfo (void);
 
+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 init_fnc_t *init_sequence[] = {
 #if defined(CONFIG_ARCH_CPU_INIT)
 	arch_cpu_init,		/* basic arch cpu dependent setup */
@@ -449,6 +462,459 @@
 
 	/* NOTREACHED - no way out of command loop except booting */
 }
+#else
+void __dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size =  gd->ram_size;
+}
+void dram_init_banksize(void)
+	__attribute__((weak, alias("__dram_init_banksize")));
+
+init_fnc_t *init_sequence[] = {
+#if defined(CONFIG_ARCH_CPU_INIT)
+	arch_cpu_init,		/* basic arch cpu dependent setup */
+#endif
+#if defined(CONFIG_BOARD_EARLY_INIT_F)
+	board_early_init_f,
+#endif
+	timer_init,		/* initialize timer */
+#ifdef CONFIG_FSL_ESDHC
+	get_clocks,
+#endif
+	env_init,		/* initialize environment */
+	init_baudrate,		/* initialze baudrate settings */
+	serial_init,		/* serial communications setup */
+	console_init_f,		/* stage 1 init of console */
+	display_banner,		/* say that we are here */
+#if defined(CONFIG_DISPLAY_CPUINFO)
+	print_cpuinfo,		/* display cpu info (and speed) */
+#endif
+#if defined(CONFIG_DISPLAY_BOARDINFO)
+	checkboard,		/* display board info */
+#endif
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+	init_func_i2c,
+#endif
+	dram_init,		/* configure available RAM banks */
+#if defined(CONFIG_CMD_PCI) || defined (CONFIG_PCI)
+	arm_pci_init,
+#endif
+	NULL,
+};
+
+void board_init_f (ulong bootflag)
+{
+	bd_t *bd;
+	init_fnc_t **init_fnc_ptr;
+	gd_t *id;
+	ulong addr, addr_sp;
+
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *) (CONFIG_SYS_INIT_SP_ADDR);
+	/* compiler optimization barrier needed for GCC >= 3.4 */
+	__asm__ __volatile__("": : :"memory");
+
+	memset ((void*)gd, 0, sizeof (gd_t));
+
+	gd->mon_len = _bss_end - _TEXT_BASE;
+
+	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+		if ((*init_fnc_ptr)() != 0) {
+			hang ();
+		}
+	}
+
+	debug ("monitor len: %08lX\n", gd->mon_len);
+	/*
+	 * Ram is setup, size stored in gd !!
+	 */
+	debug ("ramsize: %08lX\n", gd->ram_size);
+#if defined(CONFIG_SYS_MEM_TOP_HIDE)
+	/*
+	 * Subtract specified amount of memory to hide so that it won't
+	 * get "touched" at all by U-Boot. By fixing up gd->ram_size
+	 * the Linux kernel should now get passed the now "corrected"
+	 * memory size and won't touch it either. This should work
+	 * for arch/ppc and arch/powerpc. Only Linux board ports in
+	 * arch/powerpc with bootwrapper support, that recalculate the
+	 * memory size from the SDRAM controller setup will have to
+	 * get fixed.
+	 */
+	gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
+#endif
+
+	addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
+
+#ifdef CONFIG_LOGBUFFER
+#ifndef CONFIG_ALT_LB_ADDR
+	/* reserve kernel log buffer */
+	addr -= (LOGBUFF_RESERVE);
+	debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
+#endif
+#endif
+
+#ifdef CONFIG_PRAM
+	/*
+	 * reserve protected RAM
+	 */
+	i = getenv_r ("pram", (char *)tmp, sizeof (tmp));
+	reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM;
+	addr -= (reg << 10);		/* size is in kB */
+	debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
+#endif /* CONFIG_PRAM */
+
+#if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE))
+	/* reserve TLB table */
+	addr -= (4096 * 4);
+
+	/* round down to next 64 kB limit */
+	addr &= ~(0x10000 - 1);
+
+	gd->tlb_addr = addr;
+	debug ("TLB table at: %08lx\n", addr);
+#endif
+
+	/* round down to next 4 kB limit */
+	addr &= ~(4096 - 1);
+	debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+
+#ifdef CONFIG_VFD
+#	ifndef PAGE_SIZE
+#	  define PAGE_SIZE 4096
+#	endif
+	/*
+	 * reserve memory for VFD display (always full pages)
+	 */
+	addr -= vfd_setmem (addr);
+	gd->fb_base = addr;
+#endif /* CONFIG_VFD */
+
+#ifdef CONFIG_LCD
+	/* reserve memory for LCD display (always full pages) */
+	addr = lcd_setmem (addr);
+	gd->fb_base = addr;
+#endif /* CONFIG_LCD */
+
+	/*
+	 * reserve memory for U-Boot code, data & bss
+	 * round down to next 4 kB limit
+	 */
+	addr -= gd->mon_len;
+	addr &= ~(4096 - 1);
+
+	debug ("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, addr);
+
+#ifndef CONFIG_PRELOADER
+	/*
+	 * reserve memory for malloc() arena
+	 */
+	addr_sp = addr - TOTAL_MALLOC_LEN;
+	debug ("Reserving %dk for malloc() at: %08lx\n",
+			TOTAL_MALLOC_LEN >> 10, addr_sp);
+	/*
+	 * (permanently) allocate a Board Info struct
+	 * and a permanent copy of the "global" data
+	 */
+	addr_sp -= sizeof (bd_t);
+	bd = (bd_t *) addr_sp;
+	gd->bd = bd;
+	debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
+			sizeof (bd_t), addr_sp);
+	addr_sp -= sizeof (gd_t);
+	id = (gd_t *) addr_sp;
+	debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
+			sizeof (gd_t), addr_sp);
+
+	/* setup stackpointer for exeptions */
+	gd->irq_sp = addr_sp;
+#ifdef CONFIG_USE_IRQ
+	addr_sp -= (CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ);
+	debug ("Reserving %zu Bytes for IRQ stack at: %08lx\n",
+		CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ, addr_sp);
+#endif
+	/* leave 3 words for abort-stack    */
+	addr_sp -= 3;
+
+	/* 8-byte alignment for ABI compliance */
+	addr_sp &= ~0x07;
+#else
+	addr_sp += 128;	/* leave 32 words for abort-stack   */
+	gd->irq_sp = addr_sp;
+#endif
+
+	debug ("New Stack Pointer is: %08lx\n", addr_sp);
+
+#ifdef CONFIG_POST
+	post_bootmode_init();
+	post_run (NULL, POST_ROM | post_bootmode_get(0));
+#endif
+
+	gd->bd->bi_baudrate = gd->baudrate;
+	/* Ram ist board specific, so move it to board code ... */
+	dram_init_banksize();
+	display_dram_config();	/* and display it */
+
+	gd->relocaddr = addr;
+	gd->start_addr_sp = addr_sp;
+	gd->reloc_off = addr - _TEXT_BASE;
+	debug ("relocation Offset is: %08lx\n", gd->reloc_off);
+	memcpy (id, (void *)gd, sizeof (gd_t));
+
+	relocate_code (addr_sp, id, addr);
+
+	/* NOTREACHED - relocate_code() does not return */
+}
+
+#if !defined(CONFIG_SYS_NO_FLASH)
+static char *failed = "*** failed ***\n";
+#endif
+
+/************************************************************************
+ *
+ * This is the next part if the initialization sequence: we are now
+ * running from RAM and have a "normal" C environment, i. e. global
+ * data can be written, BSS has been cleared, the stack size in not
+ * that critical any more, etc.
+ *
+ ************************************************************************
+ */
+void board_init_r (gd_t *id, ulong dest_addr)
+{
+	char *s;
+	bd_t *bd;
+	ulong malloc_start;
+#if !defined(CONFIG_SYS_NO_FLASH)
+	ulong flash_size;
+#endif
+#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+	extern void malloc_bin_reloc (void);
+#if defined(CONFIG_CMD_BMP)
+	extern void bmp_reloc(void);
+#endif
+#if defined(CONFIG_CMD_I2C)
+	extern void i2c_reloc(void);
+#endif
+#endif
+
+	gd = id;
+	bd = gd->bd;
+
+	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
+
+	monitor_flash_len = _bss_start - _TEXT_BASE;
+	debug ("monitor flash len: %08lX\n", monitor_flash_len);
+	board_init();	/* Setup chipselects */
+
+#ifdef CONFIG_SERIAL_MULTI
+	serial_initialize();
+#endif
+
+	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+
+#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+	/*
+	 * We have to relocate the command table manually
+	 */
+	fixup_cmdtable(&__u_boot_cmd_start,
+		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
+#if defined(CONFIG_CMD_BMP)
+	bmp_reloc();
+#endif
+#if defined(CONFIG_CMD_I2C)
+	i2c_reloc();
+#endif
+#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+
+#ifdef CONFIG_LOGBUFFER
+	logbuff_init_ptrs ();
+#endif
+#ifdef CONFIG_POST
+	post_output_backlog ();
+#ifndef CONFIG_RELOC_FIXUP_WORKS
+	post_reloc ();
+#endif
+#endif
+
+	/* The Malloc area is immediately below the monitor copy in DRAM */
+	malloc_start = dest_addr - TOTAL_MALLOC_LEN;
+	mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
+#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+	malloc_bin_reloc ();
+#endif
+
+#if !defined(CONFIG_SYS_NO_FLASH)
+	puts ("FLASH: ");
+
+	if ((flash_size = flash_init ()) > 0) {
+# ifdef CONFIG_SYS_FLASH_CHECKSUM
+		print_size (flash_size, "");
+		/*
+		 * Compute and print flash CRC if flashchecksum is set to 'y'
+		 *
+		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
+		 */
+		s = getenv ("flashchecksum");
+		if (s && (*s == 'y')) {
+			printf ("  CRC: %08X",
+				crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
+			);
+		}
+		putc ('\n');
+# else	/* !CONFIG_SYS_FLASH_CHECKSUM */
+		print_size (flash_size, "\n");
+# endif /* CONFIG_SYS_FLASH_CHECKSUM */
+	} else {
+		puts (failed);
+		hang ();
+	}
+#endif
+
+#if defined(CONFIG_CMD_NAND)
+	puts ("NAND:  ");
+	nand_init();		/* go init the NAND */
+#endif
+
+#if defined(CONFIG_CMD_ONENAND)
+	onenand_init();
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+	AT91F_DataflashInit();
+	dataflash_print_info();
+#endif
+
+	/* initialize environment */
+	env_relocate ();
+
+#ifdef CONFIG_VFD
+	/* must do this after the framebuffer is allocated */
+	drv_vfd_init();
+#endif /* CONFIG_VFD */
+
+	/* IP Address */
+	gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
+
+	stdio_init ();	/* get the devices list going. */
+
+	jumptable_init ();
+
+#if defined(CONFIG_API)
+	/* Initialize API */
+	api_init ();
+#endif
+
+	console_init_r ();	/* fully init console as a device */
+
+#if defined(CONFIG_ARCH_MISC_INIT)
+	/* miscellaneous arch dependent initialisations */
+	arch_misc_init ();
+#endif
+#if defined(CONFIG_MISC_INIT_R)
+	/* miscellaneous platform dependent initialisations */
+	misc_init_r ();
+#endif
+
+	 /* set up exceptions */
+	interrupt_init ();
+	/* enable exceptions */
+	enable_interrupts ();
+
+	/* Perform network card initialisation if necessary */
+#ifdef CONFIG_DRIVER_TI_EMAC
+	/* XXX: this needs to be moved to board init */
+extern void davinci_eth_set_mac_addr (const u_int8_t *addr);
+	if (getenv ("ethaddr")) {
+		uchar enetaddr[6];
+		eth_getenv_enetaddr("ethaddr", enetaddr);
+		davinci_eth_set_mac_addr(enetaddr);
+	}
+#endif
+
+#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
+	/* XXX: this needs to be moved to board init */
+	if (getenv ("ethaddr")) {
+		uchar enetaddr[6];
+		eth_getenv_enetaddr("ethaddr", enetaddr);
+		smc_set_mac_addr(enetaddr);
+	}
+#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
+
+	/* Initialize from environment */
+	if ((s = getenv ("loadaddr")) != NULL) {
+		load_addr = simple_strtoul (s, NULL, 16);
+	}
+#if defined(CONFIG_CMD_NET)
+	if ((s = getenv ("bootfile")) != NULL) {
+		copy_filename (BootFile, s, sizeof (BootFile));
+	}
+#endif
+
+#ifdef BOARD_LATE_INIT
+	board_late_init ();
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+	puts ("MMC:   ");
+	mmc_initialize (gd->bd);
+#endif
+
+#ifdef CONFIG_BITBANGMII
+	bb_miiphy_init();
+#endif
+#if defined(CONFIG_CMD_NET)
+#if defined(CONFIG_NET_MULTI)
+	puts ("Net:   ");
+#endif
+	eth_initialize(gd->bd);
+#if defined(CONFIG_RESET_PHY_R)
+	debug ("Reset Ethernet PHY\n");
+	reset_phy();
+#endif
+#endif
+
+#ifdef CONFIG_POST
+	post_run (NULL, POST_RAM | post_bootmode_get(0));
+#endif
+
+#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
+	/*
+	 * Export available size of memory for Linux,
+	 * taking into account the protected RAM at top of memory
+	 */
+	{
+		ulong pram;
+		uchar memsz[32];
+#ifdef CONFIG_PRAM
+		char *s;
+
+		if ((s = getenv ("pram")) != NULL) {
+			pram = simple_strtoul (s, NULL, 10);
+		} else {
+			pram = CONFIG_PRAM;
+		}
+#else
+		pram=0;
+#endif
+#ifdef CONFIG_LOGBUFFER
+#ifndef CONFIG_ALT_LB_ADDR
+		/* Also take the logbuffer into account (pram is in kB) */
+		pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
+#endif
+#endif
+		sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
+		setenv ("mem", (char *)memsz);
+	}
+#endif
+
+	/* main_loop() can return to retry autoboot, if so just run it again. */
+	for (;;) {
+		main_loop ();
+	}
+
+	/* NOTREACHED - no way out of command loop except booting */
+}
+#endif /* defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
 
 void hang (void)
 {