diff --git a/doc/README-integrator b/doc/README-integrator
index 93d7688..c435c88 100644
--- a/doc/README-integrator
+++ b/doc/README-integrator
@@ -12,7 +12,7 @@
 --------
 There are two Integrator variants - Integrator/AP and Integrator/CP.
 Each may be fitted with a variety of core modules (CMs).
-Each CM consists of a ARM processor core and associated hardware e.g 
+Each CM consists of a ARM processor core and associated hardware e.g
 	FPGA implementing various controllers and/or register
 	SSRAM
 	SDRAM
@@ -26,29 +26,29 @@
 b) Run ARM boot monitor, automatically run U-Boot image from flash
 c) Run U-Boot image direct from flash.
 
-In cases a) and b) the ARM boot monitor will have configured the CM and mapped 
+In cases a) and b) the ARM boot monitor will have configured the CM and mapped
 writeable memory to 0x00000000 in the Integrator address space.
 U-Boot has to carry out minimal configration before standard code is run.
 
 In case c) it may be necessary for U-Boot to perform CM dependent initialization.
 
 Configuring U-Boot :
-------------------	
+------------------
 	The makefile contains targets for Integrator platforms of both types
-fitted with all current variants of CM. If these targets are to be used with 
-boot process c) above then CONFIG_INIT_CRITICAL may need to be defined to ensure 
+fitted with all current variants of CM. If these targets are to be used with
+boot process c) above then CONFIG_INIT_CRITICAL may need to be defined to ensure
 that the CM is correctly configured.
 
 	There are also targets independent of CM. These may not be suitable for
-boot process c) above. They have been preserved for backward compatibility with 
+boot process c) above. They have been preserved for backward compatibility with
 existing build processes.
 
 Code Hierarchy Applied :
 ----------------------
-Code specific to initialization of a particular ARM processor has been placed in 
+Code specific to initialization of a particular ARM processor has been placed in
 cpu/arm<>/start.S so that it may be used by other boards.
 
-However, to avoid duplicating code through all processor files, a generic core 
+However, to avoid duplicating code through all processor files, a generic core
 for ARM Integrator CMs has been added
 
 	cpu/arm_intcm
@@ -57,10 +57,7 @@
 need placing in each CM processor file......
 
 Code specific to the initialization of the CM, rather than the cpu, and initialization
-of the Integrator board itself, has been placed in 
+of the Integrator board itself, has been placed in
 
-	board/integrator<>/platform.S 
+	board/integrator<>/platform.S
 	board/integrator<>/integrator<>.c
-
-  
-