blob: 8dee595eaf85359bcf6a128fba2b088cc77cbbee [file] [log] [blame]
/*
* Copyright (C) 2010-2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/arch/hab.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
/* -------- start of HAB API updates ------------*/
#define hab_rvt_report_event_p \
( \
((is_cpu_type(MXC_CPU_MX6Q) || \
is_cpu_type(MXC_CPU_MX6D)) && \
(soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \
(is_cpu_type(MXC_CPU_MX6DL) && \
(soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \
((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT) \
)
#define hab_rvt_report_status_p \
( \
((is_cpu_type(MXC_CPU_MX6Q) || \
is_cpu_type(MXC_CPU_MX6D)) && \
(soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\
(is_cpu_type(MXC_CPU_MX6DL) && \
(soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\
((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS) \
)
#define hab_rvt_authenticate_image_p \
( \
((is_cpu_type(MXC_CPU_MX6Q) || \
is_cpu_type(MXC_CPU_MX6D)) && \
(soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \
(is_cpu_type(MXC_CPU_MX6DL) && \
(soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \
((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE) \
)
#define hab_rvt_entry_p \
( \
((is_cpu_type(MXC_CPU_MX6Q) || \
is_cpu_type(MXC_CPU_MX6D)) && \
(soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \
(is_cpu_type(MXC_CPU_MX6DL) && \
(soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \
((hab_rvt_entry_t *)HAB_RVT_ENTRY) \
)
#define hab_rvt_exit_p \
( \
((is_cpu_type(MXC_CPU_MX6Q) || \
is_cpu_type(MXC_CPU_MX6D)) && \
(soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \
(is_cpu_type(MXC_CPU_MX6DL) && \
(soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \
((hab_rvt_exit_t *)HAB_RVT_EXIT) \
)
#define IVT_SIZE 0x20
#define ALIGN_SIZE 0x1000
#define CSF_PAD_SIZE 0x2000
#define MX6DQ_PU_IROM_MMU_EN_VAR 0x009024a8
#define MX6DLS_PU_IROM_MMU_EN_VAR 0x00901dd0
#define MX6SL_PU_IROM_MMU_EN_VAR 0x00900a18
/*
* +------------+ 0x0 (DDR_UIMAGE_START) -
* | Header | |
* +------------+ 0x40 |
* | | |
* | | |
* | | |
* | | |
* | Image Data | |
* . | |
* . | > Stuff to be authenticated ----+
* . | | |
* | | | |
* | | | |
* +------------+ | |
* | | | |
* | Fill Data | | |
* | | | |
* +------------+ Align to ALIGN_SIZE | |
* | IVT | | |
* +------------+ + IVT_SIZE - |
* | | |
* | CSF DATA | <---------------------------------------------------------+
* | |
* +------------+
* | |
* | Fill Data |
* | |
* +------------+ + CSF_PAD_SIZE
*/
bool is_hab_enabled(void)
{
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
struct fuse_bank *bank = &ocotp->bank[0];
struct fuse_bank0_regs *fuse =
(struct fuse_bank0_regs *)bank->fuse_regs;
uint32_t reg = readl(&fuse->cfg5);
return (reg & 0x2) == 0x2;
}
void display_event(uint8_t *event_data, size_t bytes)
{
uint32_t i;
if (!(event_data && bytes > 0))
return;
for (i = 0; i < bytes; i++) {
if (i == 0)
printf("\t0x%02x", event_data[i]);
else if ((i % 8) == 0)
printf("\n\t0x%02x", event_data[i]);
else
printf(" 0x%02x", event_data[i]);
}
}
int get_hab_status(void)
{
uint32_t index = 0; /* Loop index */
uint8_t event_data[128]; /* Event data buffer */
size_t bytes = sizeof(event_data); /* Event size in bytes */
enum hab_config config = 0;
enum hab_state state = 0;
hab_rvt_report_event_t *hab_rvt_report_event;
hab_rvt_report_status_t *hab_rvt_report_status;
hab_rvt_report_event = hab_rvt_report_event_p;
hab_rvt_report_status = hab_rvt_report_status_p;
if (is_hab_enabled())
puts("\nSecure boot enabled\n");
else
puts("\nSecure boot disabled\n");
/* Check HAB status */
if (hab_rvt_report_status(&config, &state) != HAB_SUCCESS) {
printf("\nHAB Configuration: 0x%02x, HAB State: 0x%02x\n",
config, state);
/* Display HAB Error events */
while (hab_rvt_report_event(HAB_FAILURE, index, event_data,
&bytes) == HAB_SUCCESS) {
puts("\n");
printf("--------- HAB Event %d -----------------\n",
index + 1);
puts("event data:\n");
display_event(event_data, bytes);
puts("\n");
bytes = sizeof(event_data);
index++;
}
}
/* Display message if no HAB events are found */
else {
printf("\nHAB Configuration: 0x%02x, HAB State: 0x%02x\n",
config, state);
puts("No HAB Events Found!\n\n");
}
return 0;
}
uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
{
uint32_t load_addr = 0;
size_t bytes;
ptrdiff_t ivt_offset = 0;
int result = 0;
ulong start;
hab_rvt_authenticate_image_t *hab_rvt_authenticate_image;
hab_rvt_entry_t *hab_rvt_entry;
hab_rvt_exit_t *hab_rvt_exit;
hab_rvt_authenticate_image = hab_rvt_authenticate_image_p;
hab_rvt_entry = hab_rvt_entry_p;
hab_rvt_exit = hab_rvt_exit_p;
if (is_hab_enabled()) {
printf("\nAuthenticate image from DDR location 0x%x...\n",
ddr_start);
hab_caam_clock_enable(1);
if (hab_rvt_entry() == HAB_SUCCESS) {
/* If not already aligned, Align to ALIGN_SIZE */
ivt_offset = (image_size + ALIGN_SIZE - 1) &
~(ALIGN_SIZE - 1);
start = ddr_start;
bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE;
#ifdef DEBUG
printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n",
ivt_offset, ddr_start + ivt_offset);
puts("Dumping IVT\n");
print_buffer(ddr_start + ivt_offset,
(void *)(ddr_start + ivt_offset),
4, 0x8, 0);
puts("Dumping CSF Header\n");
print_buffer(ddr_start + ivt_offset+IVT_SIZE,
(void *)(ddr_start + ivt_offset+IVT_SIZE),
4, 0x10, 0);
get_hab_status();
puts("\nCalling authenticate_image in ROM\n");
printf("\tivt_offset = 0x%x\n", ivt_offset);
printf("\tstart = 0x%08lx\n", start);
printf("\tbytes = 0x%x\n", bytes);
#endif
/*
* If the MMU is enabled, we have to notify the ROM
* code, or it won't flush the caches when needed.
* This is done, by setting the "pu_irom_mmu_enabled"
* word to 1. You can find its address by looking in
* the ROM map. This is critical for
* authenticate_image(). If MMU is enabled, without
* setting this bit, authentication will fail and may
* crash.
*/
/* Check MMU enabled */
if (get_cr() & CR_M) {
if (is_cpu_type(MXC_CPU_MX6Q) ||
is_cpu_type(MXC_CPU_MX6D)) {
/*
* This won't work on Rev 1.0.0 of
* i.MX6Q/D, since their ROM doesn't
* do cache flushes. don't think any
* exist, so we ignore them.
*/
writel(1, MX6DQ_PU_IROM_MMU_EN_VAR);
} else if (is_cpu_type(MXC_CPU_MX6DL) ||
is_cpu_type(MXC_CPU_MX6SOLO)) {
writel(1, MX6DLS_PU_IROM_MMU_EN_VAR);
} else if (is_cpu_type(MXC_CPU_MX6SL)) {
writel(1, MX6SL_PU_IROM_MMU_EN_VAR);
}
}
load_addr = (uint32_t)hab_rvt_authenticate_image(
HAB_CID_UBOOT,
ivt_offset, (void **)&start,
(size_t *)&bytes, NULL);
if (hab_rvt_exit() != HAB_SUCCESS) {
puts("hab exit function fail\n");
load_addr = 0;
}
} else {
puts("hab entry function fail\n");
}
hab_caam_clock_enable(0);
get_hab_status();
} else {
puts("hab fuse not enabled\n");
}
if ((!is_hab_enabled()) || (load_addr != 0))
result = 1;
return result;
}
int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if ((argc != 1)) {
cmd_usage(cmdtp);
return 1;
}
get_hab_status();
return 0;
}
static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
ulong addr, ivt_offset;
int rcode = 0;
if (argc < 3)
return CMD_RET_USAGE;
addr = simple_strtoul(argv[1], NULL, 16);
ivt_offset = simple_strtoul(argv[2], NULL, 16);
rcode = authenticate_image(addr, ivt_offset);
return rcode;
}
U_BOOT_CMD(
hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status,
"display HAB status",
""
);
U_BOOT_CMD(
hab_auth_img, 3, 0, do_authenticate_image,
"authenticate image via HAB",
"addr ivt_offset\n"
"addr - image hex address\n"
"ivt_offset - hex offset of IVT in the image"
);