| #ifndef _CEC_TX_REG_H |
| #define _CEC_TX_REG_H |
| |
| #ifndef CONFIG_CEC_OSD_NAME |
| #define CONFIG_CEC_OSD_NAME "Mbox" |
| #endif |
| |
| //typedef unsigned int uint32_t; |
| |
| #define IO_AOBUS_BASE (0xC8100000) |
| #define AOBUS_REG_ADDR(reg) ((IO_AOBUS_BASE << OFFSET) + reg) |
| |
| //#define AO_DEBUG_REG0 ((0x00 << 10) | (0x28 << 2)) |
| //#define P_AO_DEBUG_REG0 AOBUS_REG_ADDR(AO_DEBUG_REG0) |
| //#define AO_DEBUG_REG1 ((0x00 << 10) | (0x29 << 2)) |
| //#define P_AO_DEBUG_REG1 AOBUS_REG_ADDR(AO_DEBUG_REG1) |
| //#define AO_DEBUG_REG2 ((0x00 << 10) | (0x2a << 2)) |
| //#define P_AO_DEBUG_REG2 AOBUS_REG_ADDR(AO_DEBUG_REG2) |
| //#define AO_DEBUG_REG3 ((0x00 << 10) | (0x2b << 2)) |
| //#define P_AO_DEBUG_REG3 AOBUS_REG_ADDR(AO_DEBUG_REG3) |
| //#define AO_CEC_GEN_CNTL ((0x00 << 10) | (0x40 << 2)) |
| //#define P_AO_CEC_GEN_CNTL AOBUS_REG_ADDR(AO_CEC_GEN_CNTL) |
| //#define AO_CEC_RW_REG ((0x00 << 10) | (0x41 << 2)) |
| //#define P_AO_CEC_RW_REG AOBUS_REG_ADDR(AO_CEC_RW_REG) |
| //#define AO_CEC_INTR_MASKN ((0x00 << 10) | (0x42 << 2)) |
| //#define P_AO_CEC_INTR_MASKN AOBUS_REG_ADDR(AO_CEC_INTR_MASKN) |
| //#define AO_CEC_INTR_CLR ((0x00 << 10) | (0x43 << 2)) |
| //#define P_AO_CEC_INTR_CLR AOBUS_REG_ADDR(AO_CEC_INTR_CLR) |
| //#define AO_CEC_INTR_STAT ((0x00 << 10) | (0x44 << 2)) |
| //#define P_AO_CEC_INTR_STAT AOBUS_REG_ADDR(AO_CEC_INTR_STAT) |
| |
| //#define P_AO_RTI_GEN_PWR_SLEEP0 (0xc8100000 + (0x3a << 2)) |
| |
| //********** OTHER BASE related **********// |
| #define HDMI_OTHER_CTRL0 0x0 |
| #define HDMI_OTHER_CTRL1 0x1 |
| #define HDMI_OTHER_STATUS0 0x2 |
| #define HDMI_OTHER_CTRL2 0x3 |
| #define HDMI_OTHER_INTR_MASKN 0x4 |
| #define HDMI_OTHER_INTR_STAT 0x5 |
| #define HDMI_OTHER_INTR_STAT_CLR 0x6 |
| |
| |
| //********** CEC related **********// |
| //read/write |
| #define CEC_TX_MSG_0_HEADER 0x00 |
| //#define CEC_TX_MSG_1_OPCODE 0x01 |
| //#define CEC_TX_MSG_2_OP1 0x02 |
| //#define CEC_TX_MSG_3_OP2 0x03 |
| //#define CEC_TX_MSG_4_OP3 0x04 |
| //#define CEC_TX_MSG_5_OP4 0x05 |
| //#define CEC_TX_MSG_6_OP5 0x06 |
| //#define CEC_TX_MSG_7_OP6 0x07 |
| //#define CEC_TX_MSG_8_OP7 0x08 |
| //#define CEC_TX_MSG_9_OP8 0x09 |
| //#define CEC_TX_MSG_A_OP9 0x0A |
| //#define CEC_TX_MSG_B_OP10 0x0B |
| //#define CEC_TX_MSG_C_OP11 0x0C |
| //#define CEC_TX_MSG_D_OP12 0x0D |
| //#define CEC_TX_MSG_E_OP13 0x0E |
| //#define CEC_TX_MSG_F_OP14 0x0F |
| |
| //read only |
| #define CEC_TX_MSG_LENGTH 0x10 |
| #define CEC_TX_MSG_CMD 0x11 |
| #define CEC_TX_WRITE_BUF 0x12 |
| #define CEC_TX_CLEAR_BUF 0x13 |
| #define CEC_RX_MSG_CMD 0x14 |
| #define CEC_RX_CLEAR_BUF 0x15 |
| #define CEC_LOGICAL_ADDR0 0x16 |
| //#define CEC_LOGICAL_ADDR1 0x17 |
| //#define CEC_LOGICAL_ADDR2 0x18 |
| //#define CEC_LOGICAL_ADDR3 0x19 |
| //#define CEC_LOGICAL_ADDR4 0x1A |
| #define CEC_CLOCK_DIV_H 0x1B |
| #define CEC_CLOCK_DIV_L 0x1C |
| |
| //read/write |
| #define CEC_RX_MSG_0_HEADER 0x80 |
| //#define CEC_RX_MSG_1_OPCODE 0x81 |
| //#define CEC_RX_MSG_2_OP1 0x82 |
| //#define CEC_RX_MSG_3_OP2 0x83 |
| //#define CEC_RX_MSG_4_OP3 0x84 |
| //#define CEC_RX_MSG_5_OP4 0x85 |
| //#define CEC_RX_MSG_6_OP5 0x86 |
| //#define CEC_RX_MSG_7_OP6 0x87 |
| //#define CEC_RX_MSG_8_OP7 0x88 |
| //#define CEC_RX_MSG_9_OP8 0x89 |
| //#define CEC_RX_MSG_A_OP9 0x8A |
| //#define CEC_RX_MSG_B_OP10 0x8B |
| //#define CEC_RX_MSG_C_OP11 0x8C |
| //#define CEC_RX_MSG_D_OP12 0x8D |
| //#define CEC_RX_MSG_E_OP13 0x8E |
| //#define CEC_RX_MSG_F_OP14 0x8F |
| |
| //read only |
| #define CEC_RX_MSG_LENGTH 0x90 |
| #define CEC_RX_MSG_STATUS 0x91 |
| #define CEC_RX_NUM_MSG 0x92 |
| #define CEC_TX_MSG_STATUS 0x93 |
| #define CEC_TX_NUM_MSG 0x94 |
| |
| // tx_msg_cmd definition |
| #define TX_NO_OP 0 // No transaction |
| #define TX_REQ_CURRENT 1 // Transmit earliest message in buffer |
| #define TX_ABORT 2 // Abort transmitting earliest message |
| #define TX_REQ_NEXT 3 // Overwrite earliest message in buffer and transmit next message |
| |
| // tx_msg_status definition |
| #define TX_IDLE 0 // No transaction |
| #define TX_BUSY 1 // Transmitter is busy |
| #define TX_DONE 2 // Message has been successfully transmitted |
| #define TX_ERROR 3 // Message has been transmitted with error |
| |
| // rx_msg_cmd |
| #define RX_NO_OP 0 // No transaction |
| #define RX_ACK_CURRENT 1 // Read earliest message in buffer |
| #define RX_DISABLE 2 // Disable receiving latest message |
| #define RX_ACK_NEXT 3 // Clear earliest message from buffer and read next message |
| |
| // rx_msg_status |
| #define RX_IDLE 0 // No transaction |
| #define RX_BUSY 1 // Receiver is busy |
| #define RX_DONE 2 // Message has been received successfully |
| #define RX_ERROR 3 // Message has been received with error |
| |
| |
| /* |
| * CEC OPCODES |
| */ |
| #define CEC_OC_ABORT_MESSAGE 0xFF |
| #define CEC_OC_ACTIVE_SOURCE 0x82 |
| #define CEC_OC_CEC_VERSION 0x9E |
| #define CEC_OC_CLEAR_ANALOGUE_TIMER 0x33 |
| #define CEC_OC_CLEAR_DIGITAL_TIMER 0x99 |
| #define CEC_OC_CLEAR_EXTERNAL_TIMER 0xA1 |
| #define CEC_OC_DECK_CONTROL 0x42 |
| #define CEC_OC_DECK_STATUS 0x1B |
| #define CEC_OC_DEVICE_VENDOR_ID 0x87 |
| #define CEC_OC_FEATURE_ABORT 0x00 |
| #define CEC_OC_GET_CEC_VERSION 0x9F |
| #define CEC_OC_GET_MENU_LANGUAGE 0x91 |
| #define CEC_OC_GIVE_AUDIO_STATUS 0x71 |
| #define CEC_OC_GIVE_DECK_STATUS 0x1A |
| #define CEC_OC_GIVE_DEVICE_POWER_STATUS 0x8F |
| #define CEC_OC_GIVE_DEVICE_VENDOR_ID 0x8C |
| #define CEC_OC_GIVE_OSD_NAME 0x46 |
| #define CEC_OC_GIVE_PHYSICAL_ADDRESS 0x83 |
| #define CEC_OC_GIVE_SYSTEM_AUDIO_MODE_STATUS 0x7D |
| #define CEC_OC_GIVE_TUNER_DEVICE_STATUS 0x08 |
| #define CEC_OC_IMAGE_VIEW_ON 0x04 |
| #define CEC_OC_INACTIVE_SOURCE 0x9D |
| #define CEC_OC_MENU_REQUEST 0x8D |
| #define CEC_OC_MENU_STATUS 0x8E |
| #define CEC_OC_PLAY 0x41 |
| #define CEC_OC_POLLING_MESSAGE 0xFC /* Fake Code - <Poll Message> has no OP Code and requires only the header byte */ |
| #define CEC_OC_RECORD_OFF 0x0B |
| #define CEC_OC_RECORD_ON 0x09 |
| #define CEC_OC_RECORD_STATUS 0x0A |
| #define CEC_OC_RECORD_TV_SCREEN 0x0F |
| #define CEC_OC_REPORT_AUDIO_STATUS 0x7A |
| #define CEC_OC_REPORT_PHYSICAL_ADDRESS 0x84 |
| #define CEC_OC_REPORT_POWER_STATUS 0x90 |
| #define CEC_OC_REQUEST_ACTIVE_SOURCE 0x85 |
| #define CEC_OC_ROUTING_CHANGE 0x80 |
| #define CEC_OC_ROUTING_INFORMATION 0x81 |
| #define CEC_OC_SELECT_ANALOGUE_SERVICE 0x92 |
| #define CEC_OC_SELECT_DIGITAL_SERVICE 0x93 |
| #define CEC_OC_SET_ANALOGUE_TIMER 0x34 |
| #define CEC_OC_SET_AUDIO_RATE 0x9A |
| #define CEC_OC_SET_DIGITAL_TIMER 0x97 |
| #define CEC_OC_SET_EXTERNAL_TIMER 0xA2 |
| #define CEC_OC_SET_MENU_LANGUAGE 0x32 |
| #define CEC_OC_SET_OSD_NAME 0x47 |
| #define CEC_OC_SET_OSD_STRING 0x64 |
| #define CEC_OC_SET_STREAM_PATH 0x86 |
| #define CEC_OC_SET_SYSTEM_AUDIO_MODE 0x72 |
| #define CEC_OC_SET_TIMER_PROGRAM_TITLE 0x67 |
| #define CEC_OC_STANDBY 0x36 |
| #define CEC_OC_SYSTEM_AUDIO_MODE_REQUEST 0x70 |
| #define CEC_OC_SYSTEM_AUDIO_MODE_STATUS 0x7E |
| #define CEC_OC_TEXT_VIEW_ON 0x0D |
| #define CEC_OC_TIMER_CLEARED_STATUS 0x43 |
| #define CEC_OC_TIMER_STATUS 0x35 |
| #define CEC_OC_TUNER_DEVICE_STATUS 0x07 |
| #define CEC_OC_TUNER_STEP_DECREMENT 0x06 |
| #define CEC_OC_TUNER_STEP_INCREMENT 0x05 |
| #define CEC_OC_USER_CONTROL_PRESSED 0x44 |
| #define CEC_OC_USER_CONTROL_RELEASED 0x45 |
| #define CEC_OC_VENDOR_COMMAND 0x89 |
| #define CEC_OC_VENDOR_COMMAND_WITH_ID 0xA0 |
| #define CEC_OC_VENDOR_REMOTE_BUTTON_DOWN 0x8A |
| #define CEC_OC_VENDOR_REMOTE_BUTTON_UP 0x8B |
| |
| /*CEC UI MASK*/ |
| #define CEC_FUNC_MASK 0 |
| #define ONE_TOUCH_PLAY_MASK 1 |
| #define ONE_TOUCH_STANDBY_MASK 2 |
| #define AUTO_POWER_ON_MASK 3 |
| |
| //#define P_HHI_GCLK_MPEG2 CBUS_REG_ADDR(HHI_GCLK_MPEG2) |
| //#define P_HHI_HDMI_CLK_CNTL CBUS_REG_ADDR(HHI_HDMI_CLK_CNTL) |
| #define MAX_MSG 16 |
| #define CEC_PLAYBACK_DEVICE_TYPE 4 |
| #define CEC_BROADCAST_ADDR 0xf |
| #define CEC_VERSION_14A 5 |
| |
| enum _cec_log_dev_addr_e { |
| CEC_TV_ADDR = 0x00, |
| CEC_RECORDING_DEVICE_1_ADDR, |
| CEC_RECORDING_DEVICE_2_ADDR, |
| CEC_TUNER_1_ADDR, |
| CEC_PLAYBACK_DEVICE_1_ADDR, |
| CEC_AUDIO_SYSTEM_ADDR, |
| CEC_TUNER_2_ADDR, |
| CEC_TUNER_3_ADDR, |
| CEC_PLAYBACK_DEVICE_2_ADDR, |
| CEC_RECORDING_DEVICE_3_ADDR, |
| CEC_TUNER_4_ADDR, |
| CEC_PLAYBACK_DEVICE_3_ADDR, |
| CEC_RESERVED_1_ADDR, |
| CEC_RESERVED_2_ADDR, |
| CEC_FREE_USE_ADDR, |
| CEC_UNREGISTERED_ADDR |
| }; |
| |
| typedef enum { |
| CEC_UNRECONIZED_OPCODE = 0x0, |
| CEC_NOT_CORRECT_MODE_TO_RESPOND, |
| CEC_CANNOT_PROVIDE_SOURCE, |
| CEC_INVALID_OPERAND, |
| CEC_REFUSED, |
| CEC_UNABLE_TO_DETERMINE, |
| } cec_feature_abort_e; |
| |
| typedef enum { |
| DEVICE_MENU_ACTIVE = 0, |
| DEVICE_MENU_INACTIVE, |
| } cec_device_menu_state_e; |
| |
| /* cec message structure */ |
| typedef struct { |
| unsigned char msg[16]; |
| unsigned char msg_len; |
| } cec_msg_buf_t; |
| |
| typedef struct { |
| cec_msg_buf_t buf[2]; // message memory |
| unsigned char power_status; |
| unsigned char log_addr; |
| unsigned char cec_power; |
| unsigned char rx_write_pos; |
| unsigned char rx_read_pos; |
| unsigned char rx_buf_size; |
| } cec_msg_t; |
| |
| cec_msg_t cec_msg; |
| unsigned char hdmi_cec_func_config; |
| void cec_node_init(void); |
| unsigned int cec_handler(void); |
| void remote_cec_hw_reset(void); |
| //void cec_give_device_power_status(void); |
| extern void udelay(int i); |
| |
| // The following registers are for fine tuning CEC bit timing parameters. |
| // They are only valid in AO CEC, NOT valid in HDMITX CEC. |
| // The AO CEC's timing parameters are already set default to work with 32768Hz clock, so hopefully |
| // SW never need to program these registers. The timing registers are made programmable just in case. |
| |
| #define AO_CEC_TXTIME_17MS_BIT7_0 0x40 |
| #define AO_CEC_TXTIME_17MS_BIT10_8 0x41 |
| #define AO_CEC_TXTIME_2BIT_BIT7_0 0x42 |
| #define AO_CEC_TXTIME_2BIT_BIT10_8 0x43 |
| #define AO_CEC_TXTIME_4BIT_BIT7_0 0x44 |
| #define AO_CEC_TXTIME_4BIT_BIT10_8 0x45 |
| |
| #endif // _HDMI_RX_REG_H |
| |
