blob: db18791a8627e77f9baba41199a9ba5fba3af37c [file] [log] [blame]
/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <common.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
DECLARE_GLOBAL_DATA_PTR;
struct sdram_bank {
u32 win_bar;
u32 win_sz;
};
struct sdram_addr_dec {
struct sdram_bank sdram_bank[4];
};
#define REG_CPUCS_WIN_ENABLE (1 << 0)
#define REG_CPUCS_WIN_WR_PROTECT (1 << 1)
#define REG_CPUCS_WIN_WIN0_CS(x) (((x) & 0x3) << 2)
#define REG_CPUCS_WIN_SIZE(x) (((x) & 0xff) << 24)
/*
* mvebu_sdram_bar - reads SDRAM Base Address Register
*/
u32 mvebu_sdram_bar(enum memory_bank bank)
{
struct sdram_addr_dec *base =
(struct sdram_addr_dec *)MVEBU_SDRAM_BASE;
u32 result = 0;
u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz);
if ((!enable) || (bank > BANK3))
return 0;
result = readl(&base->sdram_bank[bank].win_bar);
return result;
}
/*
* mvebu_sdram_bs_set - writes SDRAM Bank size
*/
static void mvebu_sdram_bs_set(enum memory_bank bank, u32 size)
{
struct sdram_addr_dec *base =
(struct sdram_addr_dec *)MVEBU_SDRAM_BASE;
/* Read current register value */
u32 reg = readl(&base->sdram_bank[bank].win_sz);
/* Clear window size */
reg &= ~REG_CPUCS_WIN_SIZE(0xFF);
/* Set new window size */
reg |= REG_CPUCS_WIN_SIZE((size - 1) >> 24);
writel(reg, &base->sdram_bank[bank].win_sz);
}
/*
* mvebu_sdram_bs - reads SDRAM Bank size
*/
u32 mvebu_sdram_bs(enum memory_bank bank)
{
struct sdram_addr_dec *base =
(struct sdram_addr_dec *)MVEBU_SDRAM_BASE;
u32 result = 0;
u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz);
if ((!enable) || (bank > BANK3))
return 0;
result = 0xff000000 & readl(&base->sdram_bank[bank].win_sz);
result += 0x01000000;
return result;
}
void mvebu_sdram_size_adjust(enum memory_bank bank)
{
u32 size;
/* probe currently equipped RAM size */
size = get_ram_size((void *)mvebu_sdram_bar(bank),
mvebu_sdram_bs(bank));
/* adjust SDRAM window size accordingly */
mvebu_sdram_bs_set(bank, size);
}
#ifndef CONFIG_SYS_BOARD_DRAM_INIT
int dram_init(void)
{
int i;
gd->ram_size = 0;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
gd->bd->bi_dram[i].start = mvebu_sdram_bar(i);
gd->bd->bi_dram[i].size = mvebu_sdram_bs(i);
/*
* It is assumed that all memory banks are consecutive
* and without gaps.
* If the gap is found, ram_size will be reported for
* consecutive memory only
*/
if (gd->bd->bi_dram[i].start != gd->ram_size)
break;
/*
* Don't report more than 3GiB of SDRAM, otherwise there is no
* address space left for the internal registers etc.
*/
if ((gd->ram_size + gd->bd->bi_dram[i].size != 0) &&
(gd->ram_size + gd->bd->bi_dram[i].size <= (3 << 30)))
gd->ram_size += gd->bd->bi_dram[i].size;
}
for (; i < CONFIG_NR_DRAM_BANKS; i++) {
/* If above loop terminated prematurely, we need to set
* remaining banks' start address & size as 0. Otherwise other
* u-boot functions and Linux kernel gets wrong values which
* could result in crash */
gd->bd->bi_dram[i].start = 0;
gd->bd->bi_dram[i].size = 0;
}
return 0;
}
/*
* If this function is not defined here,
* board.c alters dram bank zero configuration defined above.
*/
void dram_init_banksize(void)
{
dram_init();
}
#endif /* CONFIG_SYS_BOARD_DRAM_INIT */