| /* | |
| * (C) Copyright 2002-2006 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| * | |
| * Copyright (C) 2011 Andes Technology Corporation | |
| * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> | |
| * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #include <common.h> | |
| #include <command.h> | |
| #include <malloc.h> | |
| #include <stdio_dev.h> | |
| #include <timestamp.h> | |
| #include <version.h> | |
| #include <net.h> | |
| #include <serial.h> | |
| #include <nand.h> | |
| #include <onenand_uboot.h> | |
| #include <mmc.h> | |
| #include <asm/sections.h> | |
| DECLARE_GLOBAL_DATA_PTR; | |
| #if defined(CONFIG_SYS_I2C) | |
| #include <i2c.h> | |
| #endif | |
| ulong monitor_flash_len; | |
| /* | |
| * Init Utilities | |
| */ | |
| #if !defined(CONFIG_BAUDRATE) | |
| #define CONFIG_BAUDRATE 38400 | |
| #endif | |
| static int init_baudrate(void) | |
| { | |
| gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); | |
| return 0; | |
| } | |
| /* | |
| * WARNING: this code looks "cleaner" than the PowerPC version, but | |
| * has the disadvantage that you either get nothing, or everything. | |
| * On PowerPC, you might see "DRAM: " before the system hangs - which | |
| * gives a simple yet clear indication which part of the | |
| * initialization if failing. | |
| */ | |
| static int display_dram_config(void) | |
| { | |
| int i; | |
| #ifdef DEBUG | |
| puts("RAM Configuration:\n"); | |
| for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { | |
| printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start); | |
| print_size(gd->bd->bi_dram[i].size, "\n"); | |
| } | |
| #else | |
| ulong size = 0; | |
| for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) | |
| size += gd->bd->bi_dram[i].size; | |
| puts("DRAM: "); | |
| print_size(size, "\n"); | |
| #endif | |
| return 0; | |
| } | |
| #ifndef CONFIG_SYS_NO_FLASH | |
| static void display_flash_config(ulong size) | |
| { | |
| puts("Flash: "); | |
| print_size(size, "\n"); | |
| } | |
| #endif /* CONFIG_SYS_NO_FLASH */ | |
| #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) | |
| #include <pci.h> | |
| static int nds32_pci_init(void) | |
| { | |
| pci_init(); | |
| return 0; | |
| } | |
| #endif /* CONFIG_CMD_PCI || CONFIG_PCI */ | |
| #if defined(CONFIG_PMU) || defined(CONFIG_PCU) | |
| #ifndef CONFIG_SKIP_LOWLEVEL_INIT | |
| static int pmu_init(void) | |
| { | |
| #if defined(CONFIG_FTPMU010_POWER) | |
| #ifdef __NDS32_N1213_43U1H__ /* AG101: internal definition in toolchain */ | |
| ftpmu010_sdram_clk_disable(CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS); | |
| ftpmu010_mfpsr_select_dev(FTPMU010_MFPSR_AC97CLKSEL); | |
| ftpmu010_sdramhtc_set(CONFIG_SYS_FTPMU010_SDRAMHTC); | |
| #endif /* __NDS32_N1213_43U1H__ */ | |
| #endif | |
| return 0; | |
| } | |
| #endif | |
| #endif | |
| /* | |
| * Breathe some life into the board... | |
| * | |
| * Initialize a serial port as console, and carry out some hardware | |
| * tests. | |
| * | |
| * The first part of initialization is running from Flash memory; | |
| * its main purpose is to initialize the RAM so that we | |
| * can relocate the monitor code to RAM. | |
| */ | |
| /* | |
| * All attempts to come up with a "common" initialization sequence | |
| * that works for all boards and architectures failed: some of the | |
| * requirements are just _too_ different. To get rid of the resulting | |
| * mess of board dependent #ifdef'ed code we now make the whole | |
| * initialization sequence configurable to the user. | |
| * | |
| * The requirements for any new initalization function is simple: it | |
| * receives a pointer to the "global data" structure as it's only | |
| * argument, and returns an integer return code, where 0 means | |
| * "continue" and != 0 means "fatal error, hang the system". | |
| */ | |
| typedef int (init_fnc_t)(void); | |
| void __dram_init_banksize(void) | |
| { | |
| gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; | |
| gd->bd->bi_dram[0].size = gd->ram_size; | |
| } | |
| void dram_init_banksize(void) | |
| __attribute__((weak, alias("__dram_init_banksize"))); | |
| init_fnc_t *init_sequence[] = { | |
| #if defined(CONFIG_ARCH_CPU_INIT) | |
| arch_cpu_init, /* basic arch cpu dependent setup */ | |
| #endif | |
| #if defined(CONFIG_PMU) || defined(CONFIG_PCU) | |
| #ifndef CONFIG_SKIP_LOWLEVEL_INIT | |
| pmu_init, | |
| #endif | |
| #endif | |
| board_init, /* basic board dependent setup */ | |
| #if defined(CONFIG_USE_IRQ) | |
| interrupt_init, /* set up exceptions */ | |
| #endif | |
| timer_init, /* initialize timer */ | |
| env_init, /* initialize environment */ | |
| init_baudrate, /* initialze baudrate settings */ | |
| serial_init, /* serial communications setup */ | |
| console_init_f, /* stage 1 init of console */ | |
| #if defined(CONFIG_DISPLAY_BOARDINFO) | |
| checkboard, /* display board info */ | |
| #endif | |
| #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C) | |
| init_func_i2c, | |
| #endif | |
| dram_init, /* configure available RAM banks */ | |
| display_dram_config, | |
| NULL, | |
| }; | |
| void board_init_f(ulong bootflag) | |
| { | |
| bd_t *bd; | |
| init_fnc_t **init_fnc_ptr; | |
| gd_t *id; | |
| ulong addr, addr_sp; | |
| /* Pointer is writable since we allocated a register for it */ | |
| gd = (gd_t *) ((CONFIG_SYS_INIT_SP_ADDR) & ~0x07); | |
| memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE); | |
| gd->mon_len = (unsigned int)(&__bss_end) - (unsigned int)(&_start); | |
| for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { | |
| if ((*init_fnc_ptr)() != 0) | |
| hang(); | |
| } | |
| debug("monitor len: %08lX\n", gd->mon_len); | |
| /* | |
| * Ram is setup, size stored in gd !! | |
| */ | |
| debug("ramsize: %08lX\n", gd->ram_size); | |
| addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size; | |
| /* round down to next 4 kB limit */ | |
| addr &= ~(4096 - 1); | |
| debug("Top of RAM usable for U-Boot at: %08lx\n", addr); | |
| #ifdef CONFIG_LCD | |
| #ifdef CONFIG_FB_ADDR | |
| gd->fb_base = CONFIG_FB_ADDR; | |
| #else | |
| /* reserve memory for LCD display (always full pages) */ | |
| addr = lcd_setmem(addr); | |
| gd->fb_base = addr; | |
| #endif /* CONFIG_FB_ADDR */ | |
| #endif /* CONFIG_LCD */ | |
| /* | |
| * reserve memory for U-Boot code, data & bss | |
| * round down to next 4 kB limit | |
| */ | |
| addr -= gd->mon_len; | |
| addr &= ~(4096 - 1); | |
| debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, addr); | |
| /* | |
| * reserve memory for malloc() arena | |
| */ | |
| addr_sp = addr - TOTAL_MALLOC_LEN; | |
| debug("Reserving %dk for malloc() at: %08lx\n", | |
| TOTAL_MALLOC_LEN >> 10, addr_sp); | |
| /* | |
| * (permanently) allocate a Board Info struct | |
| * and a permanent copy of the "global" data | |
| */ | |
| addr_sp -= GENERATED_BD_INFO_SIZE; | |
| bd = (bd_t *) addr_sp; | |
| gd->bd = bd; | |
| memset((void *)bd, 0, GENERATED_BD_INFO_SIZE); | |
| debug("Reserving %zu Bytes for Board Info at: %08lx\n", | |
| GENERATED_BD_INFO_SIZE, addr_sp); | |
| addr_sp -= GENERATED_GBL_DATA_SIZE; | |
| id = (gd_t *) addr_sp; | |
| debug("Reserving %zu Bytes for Global Data at: %08lx\n", | |
| GENERATED_GBL_DATA_SIZE, addr_sp); | |
| /* setup stackpointer for exeptions */ | |
| gd->irq_sp = addr_sp; | |
| #ifdef CONFIG_USE_IRQ | |
| addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ); | |
| debug("Reserving %zu Bytes for IRQ stack at: %08lx\n", | |
| CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ, addr_sp); | |
| #endif | |
| /* leave 3 words for abort-stack */ | |
| addr_sp -= 12; | |
| /* 8-byte alignment for ABI compliance */ | |
| addr_sp &= ~0x07; | |
| debug("New Stack Pointer is: %08lx\n", addr_sp); | |
| /* Ram isn't board specific, so move it to board code ... */ | |
| dram_init_banksize(); | |
| display_dram_config(); /* and display it */ | |
| gd->relocaddr = addr; | |
| gd->start_addr_sp = addr_sp; | |
| gd->reloc_off = addr - _TEXT_BASE; | |
| debug("relocation Offset is: %08lx\n", gd->reloc_off); | |
| memcpy(id, (void *)gd, GENERATED_GBL_DATA_SIZE); | |
| relocate_code(addr_sp, id, addr); | |
| /* NOTREACHED - relocate_code() does not return */ | |
| } | |
| /* | |
| * This is the next part if the initialization sequence: we are now | |
| * running from RAM and have a "normal" C environment, i. e. global | |
| * data can be written, BSS has been cleared, the stack size in not | |
| * that critical any more, etc. | |
| */ | |
| void board_init_r(gd_t *id, ulong dest_addr) | |
| { | |
| bd_t *bd; | |
| ulong malloc_start; | |
| gd = id; | |
| bd = gd->bd; | |
| gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ | |
| monitor_flash_len = (ulong)&_end - (ulong)&_start; | |
| debug("monitor flash len: %08lX\n", monitor_flash_len); | |
| board_init(); /* Setup chipselects */ | |
| #if defined(CONFIG_NEEDS_MANUAL_RELOC) | |
| /* | |
| * We have to relocate the command table manually | |
| */ | |
| fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd), | |
| ll_entry_count(cmd_tbl_t, cmd)); | |
| #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ | |
| serial_initialize(); | |
| debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr); | |
| /* The Malloc area is immediately below the monitor copy in DRAM */ | |
| malloc_start = dest_addr - TOTAL_MALLOC_LEN; | |
| mem_malloc_init(malloc_start, TOTAL_MALLOC_LEN); | |
| #ifndef CONFIG_SYS_NO_FLASH | |
| /* configure available FLASH banks */ | |
| gd->bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; | |
| gd->bd->bi_flashsize = flash_init(); | |
| gd->bd->bi_flashoffset = CONFIG_SYS_FLASH_BASE + gd->bd->bi_flashsize; | |
| if (gd->bd->bi_flashsize) | |
| display_flash_config(gd->bd->bi_flashsize); | |
| #endif /* CONFIG_SYS_NO_FLASH */ | |
| #if defined(CONFIG_CMD_NAND) | |
| puts("NAND: "); | |
| nand_init(); /* go init the NAND */ | |
| #endif | |
| #if defined(CONFIG_CMD_IDE) | |
| puts("IDE: "); | |
| ide_init(); | |
| #endif | |
| #ifdef CONFIG_GENERIC_MMC | |
| puts("MMC: "); | |
| mmc_initialize(gd->bd); | |
| #endif | |
| #if defined(CONFIG_SYS_I2C_ADAPTERS) | |
| i2c_reloc_fixup(); | |
| #endif | |
| /* initialize environment */ | |
| env_relocate(); | |
| #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) | |
| puts("PCI: "); | |
| nds32_pci_init(); | |
| #endif | |
| stdio_init(); /* get the devices list going. */ | |
| jumptable_init(); | |
| #if defined(CONFIG_API) | |
| /* Initialize API */ | |
| api_init(); | |
| #endif | |
| console_init_r(); /* fully init console as a device */ | |
| #if defined(CONFIG_ARCH_MISC_INIT) | |
| /* miscellaneous arch dependent initialisations */ | |
| arch_misc_init(); | |
| #endif | |
| #if defined(CONFIG_MISC_INIT_R) | |
| /* miscellaneous platform dependent initialisations */ | |
| misc_init_r(); | |
| #endif | |
| #if defined(CONFIG_USE_IRQ) | |
| /* set up exceptions */ | |
| interrupt_init(); | |
| /* enable exceptions */ | |
| enable_interrupts(); | |
| #endif | |
| /* Initialize from environment */ | |
| load_addr = getenv_ulong("loadaddr", 16, load_addr); | |
| #ifdef CONFIG_BOARD_LATE_INIT | |
| board_late_init(); | |
| #endif | |
| #if defined(CONFIG_CMD_NET) | |
| puts("Net: "); | |
| eth_initialize(gd->bd); | |
| #if defined(CONFIG_RESET_PHY_R) | |
| debug("Reset Ethernet PHY\n"); | |
| reset_phy(); | |
| #endif | |
| #endif | |
| /* main_loop() can return to retry autoboot, if so just run it again. */ | |
| for (;;) | |
| main_loop(); | |
| /* NOTREACHED - no way out of command loop except booting */ | |
| } |