| |
| |
| /* |
| * |
| * Copyright (C) 2015 Amlogic, Inc. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| */ |
| |
| #include <asm/arch/timing.h> |
| #include <asm/arch/ddr_define.h> |
| |
| /* DDR freq range */ |
| #define CONFIG_DDR_CLK_LOW 375 |
| #define CONFIG_DDR_CLK_HIGH 1500 |
| /* DON'T OVER THESE RANGE */ |
| #if (CONFIG_DDR_CLK < CONFIG_DDR_CLK_LOW) || (CONFIG_DDR_CLK > CONFIG_DDR_CLK_HIGH) |
| #error "Over DDR PLL range! Please check CONFIG_DDR_CLK in board header file! \n" |
| #endif |
| |
| /* CPU freq range */ |
| #define CONFIG_CPU_CLK_LOW 600 |
| #define CONFIG_CPU_CLK_HIGH 2000 |
| /* DON'T OVER THESE RANGE */ |
| #if (CONFIG_CPU_CLK < CONFIG_CPU_CLK_LOW) || (CONFIG_CPU_CLK > CONFIG_CPU_CLK_HIGH) |
| #error "Over CPU PLL range! Please check CONFIG_CPU_CLK in board header file! \n" |
| #endif |
| |
| #define DDR3_DRV_40OHM 0 |
| #define DDR3_DRV_34OHM 1 |
| #define DDR3_ODT_0OHM 0 |
| #define DDR3_ODT_60OHM 1 |
| #define DDR3_ODT_120OHM 2 |
| #define DDR3_ODT_40OHM 3 |
| #define DDR3_ODT_20OHM 4 |
| #define DDR3_ODT_30OHM 5 |
| |
| /* lpddr2 drv odt */ |
| #define LPDDR2_DRV_34OHM 1 |
| #define LPDDR2_DRV_40OHM 2 |
| #define LPDDR2_DRV_48OHM 3 |
| #define LPDDR2_DRV_60OHM 4 |
| #define LPDDR2_DRV_80OHM 6 |
| #define LPDDR2_DRV_120OHM 7 |
| #define LPDDR2_ODT_0OHM 0 |
| |
| /* lpddr3 drv odt */ |
| #define LPDDR3_DRV_34OHM 1 |
| #define LPDDR3_DRV_40OHM 2 |
| #define LPDDR3_DRV_48OHM 3 |
| #define LPDDR3_DRV_60OHM 4 |
| #define LPDDR3_DRV_80OHM 6 |
| #define LPDDR3_DRV_34_40OHM 9 |
| #define LPDDR3_DRV_40_48OHM 10 |
| #define LPDDR3_DRV_34_48OHM 11 |
| #define LPDDR3_ODT_0OHM 0 |
| #define LPDDR3_ODT_60OHM 1 |
| #define LPDDR3_ODT_120OHM 2 |
| #define LPDDR3_ODT_240OHM 3 |
| |
| #define DDR4_DRV_34OHM 0 |
| #define DDR4_DRV_48OHM 1 |
| #define DDR4_ODT_0OHM 0 |
| #define DDR4_ODT_60OHM 1 |
| #define DDR4_ODT_120OHM 2 |
| #define DDR4_ODT_40OHM 3 |
| #define DDR4_ODT_240OHM 4 |
| #define DDR4_ODT_48OHM 5 |
| #define DDR4_ODT_80OHM 6 |
| #define DDR4_ODT_34OHM 7 |
| |
| #if ((CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR3) || (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_AUTO)) |
| #define CFG_DDR_DRV DDR3_DRV_40OHM |
| #define CFG_DDR_ODT DDR3_ODT_120OHM |
| #elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR2) |
| #define CFG_DDR_DRV LPDDR2_DRV_48OHM |
| #define CFG_DDR_ODT DDR3_ODT_120OHM |
| #elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3) |
| #define CFG_DDR_DRV LPDDR3_DRV_48OHM |
| #define CFG_DDR_ODT LPDDR3_ODT_0OHM |
| #elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR4) |
| #define CFG_DDR_DRV DDR4_DRV_34OHM //useless, no effect |
| #define CFG_DDR_ODT DDR4_ODT_60OHM //useless, no effect |
| #endif |
| |
| #define CFG_DDR4_DRV DDR4_DRV_34OHM //ddr4 driver use this one |
| #define CFG_DDR4_ODT DDR4_ODT_60OHM //ddr4 driver use this one |
| //#define CFG_DDR4_DRV DDR4_DRV_48OHM//DDR4_DRV_48OHM //ddr4 driver use this one |
| //#define CFG_DDR4_ODT DDR4_ODT_48OHM// DDR4_ODT_80OHM //ddr4 driver use this one |
| #if ((CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR4) || (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_AUTO)) |
| #define CONFIG_SOC_VREF 1+ (50+((50*48)/(48+480/(6+1)))) // 880/12 //(50+((50*48)/(48+160))) //0//50+50*drv/(drv+odt) (738/12) //0 //0 is auto --70 ---range 44.07---88.04 % |
| #define CONFIG_DRAM_VREF 1+ (50+((50*37)/(37+48)))// 860/12 // 0// (810/12) // 0 //77 //0 //0 is auto ---70 --range -- 45---92.50 % |
| #elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3) |
| #define CONFIG_SOC_VREF 51 |
| #define CONFIG_DRAM_VREF 51 |
| #else |
| #define CONFIG_SOC_VREF 51 |
| #define CONFIG_DRAM_VREF 51 |
| #endif |
| |
| #define CONFIG_ZQ_VREF 51//60 //700/12// 60//0 //(50) % //tune ddr4 ,ddr3 use 0 |
| |
| /* |
| * these parameters are corresponding to the pcb layout, |
| * please don't enable this function unless these signals |
| * has been measured by oscilloscope. |
| */ |
| #ifdef CONFIG_DDR_CMD_BDL_TUNE |
| #define DDR_AC_LCDLR 0 |
| #define DDR_CK0_BDL 18 |
| #define DDR_RAS_BDL 18 |
| #define DDR_CAS_BDL 24 |
| #define DDR_WE_BDL 21 |
| #define DDR_BA0_BDL 16 |
| #define DDR_BA1_BDL 2 |
| #define DDR_BA2_BDL 13 |
| #define DDR_ACPDD_BDL 27 |
| #define DDR_CS0_BDL 27 |
| #define DDR_CS1_BDL 27 |
| #define DDR_ODT0_BDL 27 |
| #define DDR_ODT1_BDL 27 |
| #define DDR_CKE0_BDL 27 |
| #define DDR_CKE1_BDL 27 |
| #define DDR_A0_BDL 14 |
| #define DDR_A1_BDL 9 |
| #define DDR_A2_BDL 5 |
| #define DDR_A3_BDL 18 |
| #define DDR_A4_BDL 4 |
| #define DDR_A5_BDL 16 |
| #define DDR_A6_BDL 1 |
| #define DDR_A7_BDL 10 |
| #define DDR_A8_BDL 4 |
| #define DDR_A9_BDL 7 |
| #define DDR_A10_BDL 10 |
| #define DDR_A11_BDL 9 |
| #define DDR_A12_BDL 6 |
| #define DDR_A13_BDL 16 |
| #define DDR_A14_BDL 8 |
| #define DDR_A15_BDL 27 |
| #endif |
| |
| /* CAUTION!! */ |
| /* |
| * For DDR3: |
| * 7-7-7: CONFIG_DDR_CLK range 375~ 533 |
| * 9-9-9: CONFIG_DDR_CLK range 533~ 667 |
| * 11-11-11: CONFIG_DDR_CLK range 667~ 800 |
| * 12-12-12: CONFIG_DDR_CLK range 800~ 933 |
| * 13-13-13: CONFIG_DDR_CLK range 933~1066 |
| * 14-14-14: CONFIG_DDR_CLK range 1066~1200 |
| */ |
| ddr_timing_t __ddr_timming[] = { |
| //ddr3_7_7_7 |
| { |
| .identifier = CONFIG_DDR_TIMMING_DDR3_7, |
| .cfg_ddr_rtp = (6), |
| .cfg_ddr_wtr = (7), |
| .cfg_ddr_rp = (7), |
| .cfg_ddr_rcd = (7), |
| .cfg_ddr_ras = (20), |
| .cfg_ddr_rrd = (6), |
| .cfg_ddr_rc = (27), |
| .cfg_ddr_mrd = (4), |
| .cfg_ddr_mod = (12), |
| .cfg_ddr_faw = (27), |
| .cfg_ddr_rfc = (160), |
| .cfg_ddr_wlmrd = (40), |
| .cfg_ddr_wlo = (6), |
| .cfg_ddr_xs = (512), |
| .cfg_ddr_xp = (7), |
| .cfg_ddr_cke = (4), |
| .cfg_ddr_dllk = (512), |
| .cfg_ddr_rtodt = (0), |
| .cfg_ddr_rtw = (4), |
| .cfg_ddr_refi = (78-2), |
| .cfg_ddr_refi_mddr3 = (4), |
| .cfg_ddr_cl = (7), |
| .cfg_ddr_wr = (12), |
| .cfg_ddr_cwl = (5), |
| .cfg_ddr_al = (0), |
| .cfg_ddr_exsr = (512), |
| .cfg_ddr_dqs = (4), |
| .cfg_ddr_cksre = (15), |
| .cfg_ddr_cksrx = (15), |
| .cfg_ddr_zqcs = (64), |
| .cfg_ddr_zqcl = (512), |
| .cfg_ddr_xpdll = (20), |
| .cfg_ddr_zqcsi = (1000), |
| }, |
| //ddr3_9_9_9 |
| { |
| .identifier = CONFIG_DDR_TIMMING_DDR3_9, |
| .cfg_ddr_rtp = (6), |
| .cfg_ddr_wtr = (7), |
| .cfg_ddr_rp = (9), |
| .cfg_ddr_rcd = (9), |
| .cfg_ddr_ras = (27), |
| .cfg_ddr_rrd = (6), |
| .cfg_ddr_rc = (33), |
| .cfg_ddr_mrd = (4), |
| .cfg_ddr_mod = (12), |
| .cfg_ddr_faw = (30), |
| .cfg_ddr_rfc = (196), |
| .cfg_ddr_wlmrd = (40), |
| .cfg_ddr_wlo = (6), |
| .cfg_ddr_xs = (512), |
| .cfg_ddr_xp = (7), |
| .cfg_ddr_cke = (4), |
| .cfg_ddr_dllk = (512), |
| .cfg_ddr_rtodt = (0), |
| .cfg_ddr_rtw = (6), |
| .cfg_ddr_refi = (78-2), |
| .cfg_ddr_refi_mddr3 = (4), |
| .cfg_ddr_cl = (9), |
| .cfg_ddr_wr = (12), |
| .cfg_ddr_cwl = (7), |
| .cfg_ddr_al = (0), |
| .cfg_ddr_exsr = (512), |
| .cfg_ddr_dqs = (23), |
| .cfg_ddr_cksre = (15), |
| .cfg_ddr_cksrx = (15), |
| .cfg_ddr_zqcs = (64), |
| .cfg_ddr_zqcl = (136), |
| .cfg_ddr_xpdll = (20), |
| .cfg_ddr_zqcsi = (1000), |
| }, |
| //ddr3_11_11_11 |
| { |
| .identifier = CONFIG_DDR_TIMMING_DDR3_11, |
| .cfg_ddr_rtp = (7), |
| .cfg_ddr_wtr = (7), |
| .cfg_ddr_rp = (11), |
| .cfg_ddr_rcd = (11), |
| .cfg_ddr_ras = (35), |
| .cfg_ddr_rrd = (7), |
| .cfg_ddr_rc = (45), |
| .cfg_ddr_mrd = (6), |
| .cfg_ddr_mod = (12), |
| .cfg_ddr_faw = (33), |
| .cfg_ddr_rfc = (280), |
| .cfg_ddr_wlmrd = (40), |
| .cfg_ddr_wlo = (7), |
| .cfg_ddr_xs = (512), |
| .cfg_ddr_xp = (5), |
| .cfg_ddr_cke = (4), |
| .cfg_ddr_dllk = (512), |
| .cfg_ddr_rtodt = (0), |
| .cfg_ddr_rtw = (7), |
| .cfg_ddr_refi = (78-2), |
| .cfg_ddr_refi_mddr3 = (4), |
| .cfg_ddr_cl = (11), |
| .cfg_ddr_wr = (12), |
| .cfg_ddr_cwl = (8), |
| .cfg_ddr_al = (0), |
| .cfg_ddr_exsr = (512), |
| .cfg_ddr_dqs = (23), |
| .cfg_ddr_cksre = (15), |
| .cfg_ddr_cksrx = (15), |
| .cfg_ddr_zqcs = (64), |
| .cfg_ddr_zqcl = (136), |
| .cfg_ddr_xpdll = (23), |
| .cfg_ddr_zqcsi = (1000), |
| }, |
| //ddr3_13_13_13 |
| { |
| .identifier = CONFIG_DDR_TIMMING_DDR3_13, |
| .cfg_ddr_rtp = (7), |
| .cfg_ddr_wtr = (7), |
| .cfg_ddr_rp = (13), |
| .cfg_ddr_rcd = (13), |
| .cfg_ddr_ras = (37), |
| .cfg_ddr_rrd = (7), |
| .cfg_ddr_rc = (52), |
| .cfg_ddr_mrd = (6), |
| .cfg_ddr_mod = (12), |
| .cfg_ddr_faw = (33), |
| .cfg_ddr_rfc = (280), |
| .cfg_ddr_wlmrd = (40), |
| .cfg_ddr_wlo = (7), |
| .cfg_ddr_xs = (512), |
| .cfg_ddr_xp = (7), |
| .cfg_ddr_cke = (5), |
| .cfg_ddr_dllk = (512), |
| .cfg_ddr_rtodt = (0), |
| .cfg_ddr_rtw = (7), |
| .cfg_ddr_refi = (78-2), |
| .cfg_ddr_refi_mddr3 = (4), |
| .cfg_ddr_cl = (13), |
| .cfg_ddr_wr = (16), |
| .cfg_ddr_cwl = (9), |
| .cfg_ddr_al = (0), |
| .cfg_ddr_exsr = (512), |
| .cfg_ddr_dqs = (23), |
| .cfg_ddr_cksre = (15), |
| .cfg_ddr_cksrx = (15), |
| .cfg_ddr_zqcs = (64), |
| .cfg_ddr_zqcl = (136), |
| .cfg_ddr_xpdll = (23), |
| .cfg_ddr_zqcsi = (1000), |
| }, |
| /* ddr4 1600 timing */ |
| { |
| .identifier = CONFIG_DDR_TIMMING_DDR4_1600, |
| .cfg_ddr_rtp = (4), |
| .cfg_ddr_wtr = (6), |
| .cfg_ddr_rp = (11), |
| .cfg_ddr_rcd = (11), |
| .cfg_ddr_ras = (35), |
| .cfg_ddr_rrd = (4), |
| .cfg_ddr_rc = (46),//RAS+RP |
| .cfg_ddr_mrd = (8), |
| .cfg_ddr_mod = (24), |
| .cfg_ddr_faw = (28), |
| .cfg_ddr_rfc = (280), |
| .cfg_ddr_wlmrd = (40), |
| .cfg_ddr_wlo = (8), |
| .cfg_ddr_xs = (512), |
| .cfg_ddr_xp = (7), |
| .cfg_ddr_cke = (5), |
| .cfg_ddr_dllk = (1024), //597 768 1024 |
| .cfg_ddr_rtodt = (0), |
| .cfg_ddr_rtw = (7), |
| .cfg_ddr_refi = (78-2), |
| .cfg_ddr_refi_mddr3 = (4), |
| .cfg_ddr_cl = (11), |
| .cfg_ddr_wr = (13), //15NS+1CLK |
| .cfg_ddr_cwl = (11), |
| .cfg_ddr_al = (0), |
| .cfg_ddr_exsr = (1024), //597 768 1024 |
| .cfg_ddr_dqs = (23), |
| .cfg_ddr_cksre = (15), |
| .cfg_ddr_cksrx = (15), |
| .cfg_ddr_zqcs = 128, |
| .cfg_ddr_zqcl = (256), |
| .cfg_ddr_xpdll = (23), |
| .cfg_ddr_zqcsi = (1000), |
| .cfg_ddr_tccdl = (5), |
| }, |
| /* ddr4 2400 timing */ |
| { |
| .identifier = CONFIG_DDR_TIMMING_DDR4_2400, |
| .cfg_ddr_rtp = 9,//(4), |
| .cfg_ddr_wtr = 9,//(6), |
| .cfg_ddr_rp = 15*1.2,//(11), |
| .cfg_ddr_rcd = 15*1.2,//(11), |
| .cfg_ddr_ras = 35*1.2,//(35), |
| .cfg_ddr_rrd = (8), |
| .cfg_ddr_rc =50*1.2,// (46),//RAS+RP |
| .cfg_ddr_mrd = (8), |
| .cfg_ddr_mod = (24), |
| .cfg_ddr_faw = 35*1.2,//(28), |
| .cfg_ddr_rfc = 350*1.2,//(280), |
| .cfg_ddr_wlmrd = (40), |
| .cfg_ddr_wlo = 9.5*1.2,//(8), |
| .cfg_ddr_xs = (512), |
| .cfg_ddr_xp = (7), |
| .cfg_ddr_cke = (5), |
| .cfg_ddr_dllk = (1024), //597 768 1024 |
| .cfg_ddr_rtodt = (0), |
| .cfg_ddr_rtw = (9), |
| .cfg_ddr_refi = (78-2), |
| .cfg_ddr_refi_mddr3 = (4), |
| .cfg_ddr_cl = 15*1.2,// (11), |
| .cfg_ddr_wr = 15*1.2,// (13), //15NS+1CLK |
| .cfg_ddr_cwl = 12,// (11), |
| .cfg_ddr_al = (0), |
| .cfg_ddr_exsr = (1024), //597 768 1024 |
| .cfg_ddr_dqs = 9,//12,//(23), //6 7 8 9 10 11 ok ,bit0-3 max is 15 ,why use 15 is bad 2016_11_10 jiaxing ,test should change with ddr frequency ? |
| .cfg_ddr_cksre = (15), |
| .cfg_ddr_cksrx = (15), |
| .cfg_ddr_zqcs = 128, |
| .cfg_ddr_zqcl = (256), |
| .cfg_ddr_xpdll = (23), |
| .cfg_ddr_zqcsi = (1000), |
| .cfg_ddr_tccdl = (6), |
| }, |
| /* lpddr3 timing */ |
| { |
| .identifier = CONFIG_DDR_TIMMING_LPDDR3, |
| .cfg_ddr_rtp = 6,// (6),0 |
| .cfg_ddr_wtr = (6+2), |
| .cfg_ddr_rp = (17), |
| .cfg_ddr_rcd = (15), |
| .cfg_ddr_ras = (34), |
| .cfg_ddr_rrd = (8), |
| .cfg_ddr_rc = (51), |
| .cfg_ddr_mrd = (11), |
| .cfg_ddr_mod = (12),//12-17 |
| .cfg_ddr_faw = (40), |
| .cfg_ddr_rfc = (168), |
| .cfg_ddr_wlmrd = (32), |
| .cfg_ddr_wlo = (8), |
| .cfg_ddr_xs = (512), |
| .cfg_ddr_xp = (6), |
| .cfg_ddr_cke = 7,//(6),//need <=7 |
| .cfg_ddr_dllk = (512), |
| .cfg_ddr_rtodt = (0), |
| .cfg_ddr_rtw = (7), |
| .cfg_ddr_refi = (39-2), |
| .cfg_ddr_refi_mddr3 = (0), |
| .cfg_ddr_cl = (12), |
| .cfg_ddr_wr = (12), |
| .cfg_ddr_cwl = (6), |
| .cfg_ddr_al = (0), |
| .cfg_ddr_exsr = (112), |
| .cfg_ddr_dqs = 9,//9,// (4),//rank0 rank1 turn aroud time jiaxing modify should big for 2rank lpddr3 |
| .cfg_ddr_cksre = 12,// (12),//pctl need 2? |
| .cfg_ddr_cksrx = 12,// (12),//pctl need 2? |
| .cfg_ddr_zqcs = (100), |
| .cfg_ddr_zqcl = (288), |
| .cfg_ddr_xpdll = (12), |
| .cfg_ddr_zqcsi = (1000), |
| // .cfg_ddr_rpab = (17), |
| // .cfg_ddr_rppb = (15), |
| // .cfg_ddr_tdqsck = (3),//2500-5500ps if no gate training should (int+1) |
| // .cfg_ddr_tdqsckmax = (5), |
| // .cfg_ddr_tckesr = (12), |
| // .cfg_ddr_tdpd = (500), |
| // .cfg_ddr_taond_aofd = 2, |
| } |
| }; |
| |
| ddr_set_t __ddr_setting = { |
| /* common and function defines */ |
| .ddr_channel_set = CONFIG_DDR_CHANNEL_SET, |
| .ddr_type = CONFIG_DDR_TYPE, |
| .ddr_clk = CONFIG_DDR_CLK, |
| .ddr4_clk = CONFIG_DDR4_CLK, |
| .ddr_base_addr = CFG_DDR_BASE_ADDR, |
| .ddr_start_offset = CFG_DDR_START_OFFSET, |
| .ddr_timing_ind = 0, |
| .ddr_size = CONFIG_DDR_SIZE, |
| .ddr_pll_ctrl = (0), |
| .ddr_dmc_ctrl = 0, |
| #if (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3) |
| #if (CONFIG_LPDDR_REMAP_SET == LPDDR_DIE_ROW_COL_R14_C9) |
| .ddr0_addrmap = { |
| [0]=( 5 | 6 << 5 | 7 << 10 | 8 << 15 | 9 << 20 | 10 << 25) , |
| [1]=( 11| 0<< 5 | 0 << 10 | 14 << 15 | 15 << 20 | 16 << 25 ) , |
| [2]=( 17| 18 << 5 | 19 << 10 | 20 << 15 | 21<< 20 | 22 << 25 ) , |
| [3]=( 23| 24 << 5 | 25 << 10 | 26 << 15 | 27 << 20 |29 << 25 ) , |
| [4]=( 0| 12 << 5 | 13 << 10 | 28 << 15 | 0 << 20 | 0 << 25 ) , |
| }, |
| .ddr1_addrmap = { |
| [0]=( 5 | 6 << 5 | 7 << 10 | 8 << 15 | 9 << 20 | 10 << 25) , |
| [1]=( 11| 0<< 5 | 0 << 10 | 14 << 15 | 15 << 20 | 16 << 25 ) , |
| [2]=( 17| 18 << 5 | 19 << 10 | 20 << 15 | 21<< 20 | 22 << 25 ) , |
| [3]=( 23| 24 << 5 | 25 << 10 | 26 << 15 | 27 << 20 |29 << 25 ) , |
| [4]=( 0| 12 << 5 | 13 << 10 | 28 << 15 | 0 << 20 | 0 << 25 ) , |
| }, |
| #elif (CONFIG_LPDDR_REMAP_SET== LPDDR_DIE_ROW_COL_R13_C10) |
| .ddr0_addrmap = { |
| [0]=( 5 | 6 << 5 | 7 << 10 | 8 << 15 | 9 << 20 | 10 << 25) , |
| [1]=( 11| 29 << 5 | 0 << 10 | 14 << 15 | 15 << 20 | 16 << 25 ) , |
| [2]=( 17| 18 << 5 | 19 << 10 | 20 << 15 | 21<< 20 | 22 << 25 ) , |
| [3]=( 23| 24 << 5 | 25 << 10 | 26 << 15 | 27 << 20 | 30 << 25 ) , |
| [4]=( 31| 12 << 5 | 13 << 10 | 28 << 15 | 0 << 20 | 0 << 25 ) , |
| }, |
| .ddr1_addrmap = { |
| [0]=( 5 | 6 << 5 | 7 << 10 | 8 << 15 | 9 << 20 | 10 << 25) , |
| [1]=( 11| 29 << 5 | 0 << 10 | 14 << 15 | 15 << 20 | 16 << 25 ) , |
| [2]=( 17| 18 << 5 | 19 << 10 | 20 << 15 | 21<< 20 | 22 << 25 ) , |
| [3]=( 23| 24 << 5 | 25 << 10 | 26 << 15 | 27 << 20 | 30 << 25 ) , |
| [4]=( 31| 12 << 5 | 13 << 10 | 28 << 15 | 0 << 20 | 0 << 25 ) , |
| }, |
| #endif /*CONFIG_LPDDR_REMAP_SET*/ |
| #else |
| .ddr0_addrmap = {0}, |
| .ddr1_addrmap = {0}, |
| #endif /*CONFIG_DDR_TYPE_LPDDR3*/ |
| .ddr_2t_mode = 1, |
| .ddr_full_test = CONFIG_DDR_FULL_TEST, |
| #if (0 == CONFIG_DDR_SIZE) |
| .ddr_size_detect = 1, |
| #else |
| .ddr_size_detect = 0, |
| #endif |
| .ddr_drv = CFG_DDR_DRV, |
| .ddr_odt = CFG_DDR_ODT, |
| .ddr4_drv = CFG_DDR4_DRV, |
| .ddr4_odt = CFG_DDR4_ODT, |
| |
| /* pub defines */ |
| .t_pub_ptr = { |
| [0] = ( 6 | (320 << 6) | (80 << 21)), |
| [1] = (120 | (1000 << 16)), |
| [2] = 0, |
| [3] = (20000 | (136 << 20)), |
| [4] = (1000 | (180 << 16)), |
| }, //PUB PTR0-3 |
| .t_pub_odtcr = 0x00030000, |
| .t_pub_mr = { |
| (0X0 | (0X1 << 2) | (0X0 << 3) | (0X0 << 4) | (0X0 << 7) | (0X0 << 8) | (0X7 << 9) | (1 << 12)), |
| (0X6|(1<<6)), |
| 0X20, |
| 0, |
| }, |
| .t_pub_dtpr = {0}, |
| .t_pub_pgcr0 = 0x07d81e3f, //PUB PGCR0 |
| .t_pub_pgcr1 = 0x02004620, //PUB PGCR1 |
| .t_pub_pgcr2 = 0x00f05f97, //PUB PGCR2 |
| //.t_pub_pgcr2 = 0x01f12480, //PUB PGCR2 |
| .t_pub_pgcr3 = 0xc0aae860, //PUB PGCR3 |
| .t_pub_dxccr = 0x20c01ee4, //PUB DXCCR |
| .t_pub_aciocr = {0}, //PUB ACIOCRx |
| .t_pub_dx0gcr = {0}, //PUB DX0GCRx |
| .t_pub_dx1gcr = {0}, //PUB DX1GCRx |
| .t_pub_dx2gcr = {0}, //PUB DX2GCRx |
| .t_pub_dx3gcr = {0}, //PUB DX3GCRx |
| #if (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR3) |
| .t_pub_dcr = 0XB, //PUB DCR |
| .t_pub_dtcr0 = 0x80003187, //PUB DTCR //S905 use 0x800031c7 |
| .t_pub_dtcr1 = 0x00010237, //PUB DTCR |
| .t_pub_dsgcr = 0x020641b, |
| #elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR4) |
| .t_pub_dcr = 0X40C, //PUB DCR |
| .t_pub_dtcr0 = 0x800031c7, //PUB DTCR //S905 use 0x800031c7 |
| .t_pub_dtcr1 = 0x00010237, |
| .t_pub_dsgcr = 0x020641b, |
| #elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3) |
| .t_pub_dcr = 0X89, //PUB DCR |
| .t_pub_dtcr0 = 0x80003187, //PUB DTCR //S905 use 0x800031c7 |
| .t_pub_dtcr1 = 0x00010237, |
| .t_pub_dsgcr = 0x02064db, |
| #elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_AUTO) |
| .t_pub_dcr = 0XB, //PUB DCR |
| .t_pub_dtcr0 = 0x80003187, //PUB DTCR //S905 use 0x800031c7 |
| .t_pub_dtcr1 = 0x00010237, //PUB DTCR |
| .t_pub_dsgcr = 0x020641b, |
| #endif |
| .t_pub_vtcr1 = 0x0fc00172, |
| .t_pub_dtar = (0X0 | (0X0 <<12) | (0 << 28)), |
| |
| #if (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3) |
| //lpddr3 |
| .t_pub_zq0pr = 0x0ca1c, //0x0ca1c, //PUB ZQ0PR //lpddr3 |
| .t_pub_zq1pr = 0x1cf3c, //PUB ZQ1PR |
| .t_pub_zq2pr = 0x1cf3c, //PUB ZQ2PR |
| .t_pub_zq3pr = 0x1dd1d, //PUB ZQ3PR |
| |
| /* 2layer board |
| .t_pub_zq0pr = 0x00007759, //PUB ZQ0PR, 0x5aa59,0x59959, 0x58859, //99drriver s912 ddr4 maybe 950m is bad |
| .t_pub_zq1pr = 0x0006fc5d, //PUB ZQ1PR//0x8fc5d, 0x4f95d, |
| .t_pub_zq2pr = 0x0006fc5d, //PUB ZQ2PR//0x3fc5d, 0x4f95d, |
| */ |
| #elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR4) |
| /* 4layer ddr4 */ |
| .t_pub_zq0pr = 0x0995d, //PUB ZQ0PR |
| .t_pub_zq1pr = 0x3f95d, //PUB ZQ1PR |
| .t_pub_zq2pr = 0x3f95d, //PUB ZQ2PR |
| .t_pub_zq3pr = 0x1dd1d, //PUB ZQ3PR |
| #else // ddr3 and auto |
| /* p212 4layer board ddr3 */ |
| .t_pub_zq0pr = 0x5d95d, //PUB ZQ0PR |
| .t_pub_zq1pr = 0x5d95d, //PUB ZQ1PR |
| .t_pub_zq2pr = 0x5d95d, //PUB ZQ2PR |
| .t_pub_zq3pr = 0x1dd1d, //PUB ZQ3PR |
| #endif |
| |
| /* pctl0 defines */ |
| /* pctl1 use same define as pctl0 */ |
| .t_pctl0_1us_pck = CONFIG_DDR_CLK / 2, //PCTL TOGCNT1U |
| .t_pctl0_100ns_pck = CONFIG_DDR_CLK / 20, //PCTL TOGCNT100N |
| .t_pctl0_init_us = 2, //PCTL TINIT |
| .t_pctl0_rsth_us = 2, //PCTL TRSTH |
| .t_pctl0_mcfg = 0XA2F01, //PCTL MCFG default 1T |
| //.t_pctl0_mcfg1 = 0X80000000, //PCTL MCFG1 |
| .t_pctl0_mcfg1 = 0, //[B10,B9,B8] tfaw_cfg_offset |
| //tFAW= (4 + MCFG.tfaw_cfg)*tRRD - tfaw_cfg_offset, //PCTL MCFG1 |
| .t_pctl0_scfg = 0xF01, //PCTL SCFG |
| .t_pctl0_sctl = 0x1, //PCTL SCTL |
| .t_pctl0_ppcfg = 0, |
| .t_pctl0_dfistcfg0 = 0x4, |
| .t_pctl0_dfistcfg1 = 0x1, |
| .t_pctl0_dfitctrldelay = 2, |
| .t_pctl0_dfitphywrdata = 2, |
| .t_pctl0_dfitphywrlta = 7, |
| .t_pctl0_dfitrddataen = 8, |
| .t_pctl0_dfitphyrdlat = 22, |
| .t_pctl0_dfitdramclkdis = 1, |
| .t_pctl0_dfitdramclken = 1, |
| .t_pctl0_dfitphyupdtype0 = 16, |
| .t_pctl0_dfitphyupdtype1 = 16, |
| .t_pctl0_dfitctrlupdmin = 16, |
| .t_pctl0_dfitctrlupdmax = 64, |
| .t_pctl0_dfiupdcfg = 0x3, |
| .t_pctl0_cmdtstaten = 1, |
| //.t_pctl0_dfiodtcfg = 8, |
| //.t_pctl0_dfiodtcfg1 = ( 0x0 | (0x6 << 16) ), |
| .t_pctl0_dfiodtcfg = (1<<3)|(1<<11), |
| .t_pctl0_dfiodtcfg1 = (0x0 | (0x6 << 16)), |
| |
| .t_pctl0_dfilpcfg0 = ( 1 | (3 << 4) | (1 << 8) | (13 << 12) | (7 <<16) | (1 <<24) | ( 3 << 28)), |
| |
| ///*lpddr3 |
| #if (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3) |
| .t_pub_acbdlr0 = 0, //CK0 delay fine tune TAKE CARE LPDDR3 ADD/CMD DELAY |
| .t_pub_aclcdlr = 0, |
| .t_pub_acbdlr3 = 0x2020,//0, //CK0 delay fine tune b-3f //lpddr3 tianhe 2016-10-13 |
| #elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR4) |
| //2layer board DDR4 |
| .t_pub_acbdlr0 = 0, //0x3f, |
| .t_pub_aclcdlr = 0, //0x28,//0x18, ///1t ,if 2t can add some value |
| .t_pub_acbdlr3 = 0, //0x10,// 0x10,//0xa, //cs add 22ohm 08 0ohm 0x10 |
| #else // ddr3 and auto |
| //4layer ddr3 |
| .t_pub_acbdlr0 = 0, |
| .t_pub_aclcdlr = 0,//0x18, ///1t ,if 2t can add some value |
| .t_pub_acbdlr3 = 0,//0xa, //cs |
| #endif |
| .t_pub_soc_vref_dram_vref =((((CONFIG_SOC_VREF<45)?(0):((((CONFIG_SOC_VREF*1000-44070)/698)>0X3F)?(0X3F):(((CONFIG_SOC_VREF*1000-44070)/698))))<<8)|( |
| (((CONFIG_DRAM_VREF))<45)?(0):((((CONFIG_DRAM_VREF))<61)?((((((CONFIG_DRAM_VREF*1000-45000)/650)>0X32)?(0X32):(((CONFIG_DRAM_VREF*1000-45000)/650)))|(1<<6))): |
| ((((CONFIG_DRAM_VREF*1000-60000)/650)>0X32)?(0X32):(((CONFIG_DRAM_VREF*1000-60000)/650)))))), |
| .t_pub_mr[7] = ((CONFIG_ZQ_VREF<45)?(0):((((CONFIG_ZQ_VREF*1000-44070)/698)>0X3F)?(0X3F):(((CONFIG_ZQ_VREF*1000-44070)/698)))) ,//jiaxing use for tune zq vref 20160608 |
| .ddr_func = DDR_FUNC, /* ddr func demo 2016.01.26 */ |
| |
| #if (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3) |
| //tianhe lpddr3 20161013 |
| .wr_adj_per = { |
| [0] = 90, //aclcdlr |
| [1] = 100, |
| [2] = 120, |
| [3] = 110, |
| [4] = 120, |
| [5] = 105, |
| }, |
| .rd_adj_per = { |
| [0] = 100, |
| [1] = 100, |
| [2] = 110, |
| [3] = 110, |
| [4] = 110, |
| [5] = 110,}, |
| #else |
| /* P212 */ |
| .wr_adj_per = { |
| [0]=100, |
| [1]=100, |
| [2]=95, |
| [3]=95, |
| [4]=95, |
| [5]=95, |
| }, |
| .rd_adj_per = { |
| [0]=100, |
| [1]=100, |
| [2]=88, |
| [3]=95, |
| [4]=95, |
| [5]=100, |
| }, |
| #endif |
| |
| }; |
| |
| pll_set_t __pll_setting = { |
| .cpu_clk = CONFIG_CPU_CLK / 24 * 24, |
| .spi_ctrl = 0, |
| .vddee = CONFIG_VDDEE_INIT_VOLTAGE, |
| .vcck = CONFIG_VCCK_INIT_VOLTAGE, |
| .lCustomerID = CONFIG_AML_CUSTOMER_ID, |
| #ifdef CONFIG_DEBUG_MODE |
| .debug_mode = CONFIG_DEBUG_MODE, |
| .ddr_clk_debug = CONFIG_DDR_CLK_DEBUG, |
| .cpu_clk_debug = CONFIG_CPU_CLK_DEBUG, |
| #endif |
| /* pll ssc setting: |
| |
| .ddr_pll_ssc = 0x00120000, ppm1000 center SS, boot log show: Set ddr ssc: ppm1000 |
| .ddr_pll_ssc = 0x00124000, ppm1000 up SS, boot log show: Set ddr ssc: ppm1000+ |
| .ddr_pll_ssc = 0x00128000, ppm1000 down SS, boot log show: Set ddr ssc: ppm1000- |
| |
| .ddr_pll_ssc = 0x00140000, ppm2000 center SS, boot log show: Set ddr ssc: ppm2000 |
| .ddr_pll_ssc = 0x00144000, ppm2000 up SS, boot log show: Set ddr ssc: ppm2000+ |
| .ddr_pll_ssc = 0x00148000, ppm2000 down SS, boot log show: Set ddr ssc: ppm2000- |
| |
| .ddr_pll_ssc = 0x00160000, ppm3000 center SS, boot log show: Set ddr ssc: ppm3000 |
| .ddr_pll_ssc = 0x00164000, ppm3000 up SS, boot log show: Set ddr ssc: ppm3000+ |
| .ddr_pll_ssc = 0x00168000, ppm3000 down SS, boot log show: Set ddr ssc: ppm3000- |
| */ |
| .ddr_pll_ssc = 0, |
| }; |
