blob: b6bf16236f408aadc2003fcc880a747c608c5f6f [file] [log] [blame] [edit]
/*
* evm.c
*
* Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
* Antoine Tenart, <atenart@adeneo-embedded.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <spl.h>
#include <asm/cache.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/ddr_defs.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
return 0;
}
#ifdef CONFIG_SPL_BUILD
static struct module_pin_mux mmc_pin_mux[] = {
{ OFFSET(pincntl157), PULLDOWN_EN | PULLUDDIS | MODE(0x0) },
{ OFFSET(pincntl158), PULLDOWN_EN | PULLUDEN | MODE(0x0) },
{ OFFSET(pincntl159), PULLUP_EN | PULLUDDIS | MODE(0x0) },
{ OFFSET(pincntl160), PULLUP_EN | PULLUDDIS | MODE(0x0) },
{ OFFSET(pincntl161), PULLUP_EN | PULLUDDIS | MODE(0x0) },
{ OFFSET(pincntl162), PULLUP_EN | PULLUDDIS | MODE(0x0) },
{ OFFSET(pincntl163), PULLUP_EN | PULLUDDIS | MODE(0x0) },
{ -1 },
};
const struct dmm_lisa_map_regs evm_lisa_map_regs = {
.dmm_lisa_map_0 = 0x00000000,
.dmm_lisa_map_1 = 0x00000000,
.dmm_lisa_map_2 = 0x80640300,
.dmm_lisa_map_3 = 0xC0640320,
};
/*
* DDR2 related definitions
*/
#ifdef CONFIG_TI816X_EVM_DDR2
static struct ddr_data ddr2_data = {
.datardsratio0 = ((0x40<<10) | (0x40<<0)),
.datawdsratio0 = ((0x4A<<10) | (0x4A<<0)),
.datawiratio0 = ((0x0<<10) | (0x0<<0)),
.datagiratio0 = ((0x0<<10) | (0x0<<0)),
.datafwsratio0 = ((0x13A<<10) | (0x13A<<0)),
.datawrsratio0 = ((0x8A<<10) | (0x8A<<0)),
};
static struct cmd_control ddr2_ctrl = {
.cmd0csratio = 0x80,
.cmd0iclkout = 0x00,
.cmd1csratio = 0x80,
.cmd1iclkout = 0x00,
.cmd2csratio = 0x80,
.cmd2iclkout = 0x00,
};
static struct emif_regs ddr2_emif0_regs = {
.sdram_config = 0x43801A3A,
.ref_ctrl = 0x10000C30,
.sdram_tim1 = 0x0AAB15E2,
.sdram_tim2 = 0x423631D2,
.sdram_tim3 = 0x0080032F,
.emif_ddr_phy_ctlr_1 = 0x0, /* depend on cpu rev, set later */
};
static struct emif_regs ddr2_emif1_regs = {
.sdram_config = 0x43801A3A,
.ref_ctrl = 0x10000C30,
.sdram_tim1 = 0x0AAB15E2,
.sdram_tim2 = 0x423631D2,
.sdram_tim3 = 0x0080032F,
.emif_ddr_phy_ctlr_1 = 0x0, /* depend on cpu rev, set later */
};
#endif
/*
* DDR3 related definitions
*/
#if defined(CONFIG_TI816X_DDR_PLL_400)
#define RD_DQS 0x03B
#define WR_DQS 0x0A6
#define RD_DQS_GATE 0x12A
#define EMIF_SDCFG 0x62A41032
#define EMIF_SDREF 0x10000C30
#define EMIF_TIM1 0x0CCCE524
#define EMIF_TIM2 0x30308023
#define EMIF_TIM3 0x009F82CF
#define EMIF_PHYCFG 0x0000010B
#elif defined(CONFIG_TI816X_DDR_PLL_531)
#define RD_DQS 0x039
#define WR_DQS 0x0B4
#define RD_DQS_GATE 0x13D
#define EMIF_SDCFG 0x62A51832
#define EMIF_SDREF 0x1000102E
#define EMIF_TIM1 0x0EF136AC
#define EMIF_TIM2 0x30408063
#define EMIF_TIM3 0x009F83AF
#define EMIF_PHYCFG 0x0000010C
#elif defined(CONFIG_TI816X_DDR_PLL_675)
#define RD_DQS 0x039
#define WR_DQS 0x091
#define RD_DQS_GATE 0x196
#define EMIF_SDCFG 0x62A63032
#define EMIF_SDREF 0x10001491
#define EMIF_TIM1 0x13358875
#define EMIF_TIM2 0x5051806C
#define EMIF_TIM3 0x009F84AF
#define EMIF_PHYCFG 0x0000010F
#elif defined(CONFIG_TI816X_DDR_PLL_796)
#define RD_DQS 0x035
#define WR_DQS 0x093
#define RD_DQS_GATE 0x1B3
#define EMIF_SDCFG 0x62A73832
#define EMIF_SDREF 0x10001841
#define EMIF_TIM1 0x1779C9FE
#define EMIF_TIM2 0x50608074
#define EMIF_TIM3 0x009F857F
#define EMIF_PHYCFG 0x00000110
#endif
static struct ddr_data ddr3_data = {
.datardsratio0 = ((RD_DQS<<10) | (RD_DQS<<0)),
.datawdsratio0 = ((WR_DQS<<10) | (WR_DQS<<0)),
.datawiratio0 = ((0x20<<10) | 0x20<<0),
.datagiratio0 = ((0x20<<10) | 0x20<<0),
.datafwsratio0 = ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)),
.datawrsratio0 = (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)),
};
static const struct cmd_control ddr3_ctrl = {
.cmd0csratio = 0x100,
.cmd0iclkout = 0x001,
.cmd1csratio = 0x100,
.cmd1iclkout = 0x001,
.cmd2csratio = 0x100,
.cmd2iclkout = 0x001,
};
static const struct emif_regs ddr3_emif0_regs = {
.sdram_config = EMIF_SDCFG,
.ref_ctrl = EMIF_SDREF,
.sdram_tim1 = EMIF_TIM1,
.sdram_tim2 = EMIF_TIM2,
.sdram_tim3 = EMIF_TIM3,
.emif_ddr_phy_ctlr_1 = EMIF_PHYCFG,
};
static const struct emif_regs ddr3_emif1_regs = {
.sdram_config = EMIF_SDCFG,
.ref_ctrl = EMIF_SDREF,
.sdram_tim1 = EMIF_TIM1,
.sdram_tim2 = EMIF_TIM2,
.sdram_tim3 = EMIF_TIM3,
.emif_ddr_phy_ctlr_1 = EMIF_PHYCFG,
};
void set_uart_mux_conf(void) {}
void set_mux_conf_regs(void)
{
configure_module_pin_mux(mmc_pin_mux);
}
void sdram_init(void)
{
config_dmm(&evm_lisa_map_regs);
#ifdef CONFIG_TI816X_EVM_DDR2
if (CONFIG_TI816X_USE_EMIF0) {
ddr2_emif0_regs.emif_ddr_phy_ctlr_1 =
(get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
config_ddr(0, NULL, &ddr2_data, &ddr2_ctrl, &ddr2_emif0_regs,
0);
}
if (CONFIG_TI816X_USE_EMIF1) {
ddr2_emif1_regs.emif_ddr_phy_ctlr_1 =
(get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
config_ddr(1, NULL, &ddr2_data, &ddr2_ctrl, &ddr2_emif1_regs,
1);
}
#endif
#ifdef CONFIG_TI816X_EVM_DDR3
if (CONFIG_TI816X_USE_EMIF0)
config_ddr(0, NULL, &ddr3_data, &ddr3_ctrl, &ddr3_emif0_regs,
0);
if (CONFIG_TI816X_USE_EMIF1)
config_ddr(1, NULL, &ddr3_data, &ddr3_ctrl, &ddr3_emif1_regs,
1);
#endif
}
#endif /* CONFIG_SPL_BUILD */