blob: c8db8a0c392d3fc6c5c6d831cbc88943d0c00491 [file] [log] [blame] [edit]
MIPS Malta board
How to flash using a MIPS Navigator Probe:
- Ensure that your Malta has jumper JP1 fitted. Without this jumper you will
be unable to flash your Malta using a Navigator Probe.
- Connect Navigator Console to your probe and Malta as usual.
- Within Navigator Console run the following commands:
source /path/to/u-boot/board/imgtec/malta/flash-malta-boot.tcl
reset
flash-boot /path/to/u-boot/u-boot.bin
- You should now be able to reboot your Malta to a U-boot shell.