// SPDX-License-Identifier: GPL-2.0+
/*
 *  arch/arm/mach-imx/generic.c
 *
 *  author: Sascha Hauer
 *  Created: april 20th, 2004
 *  Copyright: Synertronixx GmbH
 *
 *  Common code for i.MX machines
 */

#include <common.h>

#ifdef CONFIG_IMX

#include <asm/arch/imx-regs.h>

void imx_gpio_mode(int gpio_mode)
{
	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> 5;
	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> 10;
	unsigned int tmp;

	/* Pullup enable */
	if(gpio_mode & GPIO_PUEN)
		PUEN(port) |= (1<<pin);
	else
		PUEN(port) &= ~(1<<pin);

	/* Data direction */
	if(gpio_mode & GPIO_OUT)
		DDIR(port) |= 1<<pin;
	else
		DDIR(port) &= ~(1<<pin);

	/* Primary / alternate function */
	if(gpio_mode & GPIO_AF)
		GPR(port) |= (1<<pin);
	else
		GPR(port) &= ~(1<<pin);

	/* use as gpio? */
	if( ocr == 3 )
		GIUS(port) |= (1<<pin);
	else
		GIUS(port) &= ~(1<<pin);

	/* Output / input configuration */
	/* FIXME: I'm not very sure about OCR and ICONF, someone
	 * should have a look over it
	 */
	if(pin<16) {
		tmp = OCR1(port);
		tmp &= ~( 3<<(pin*2));
		tmp |= (ocr << (pin*2));
		OCR1(port) = tmp;

		if( gpio_mode &	GPIO_AOUT )
			ICONFA1(port) &= ~( 3<<(pin*2));
		if( gpio_mode &	GPIO_BOUT )
			ICONFB1(port) &= ~( 3<<(pin*2));
	} else {
		tmp = OCR2(port);
		tmp &= ~( 3<<((pin-16)*2));
		tmp |= (ocr << ((pin-16)*2));
		OCR2(port) = tmp;

		if( gpio_mode &	GPIO_AOUT )
			ICONFA2(port) &= ~( 3<<((pin-16)*2));
		if( gpio_mode &	GPIO_BOUT )
			ICONFB2(port) &= ~( 3<<((pin-16)*2));
	}
}

#endif /* CONFIG_IMX */