// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2014 Broadcom Corporation.
 */

#include <common.h>
#include <div64.h>
#include <asm/io.h>
#include <asm/iproc-common/timer.h>
#include <asm/iproc-common/sysmap.h>

static inline uint64_t timer_global_read(void)
{
	uint64_t cur_tick;
	uint32_t count_h;
	uint32_t count_l;

	do {
		count_h = readl(IPROC_PERIPH_GLB_TIM_REG_BASE +
				TIMER_GLB_HI_OFFSET);
		count_l = readl(IPROC_PERIPH_GLB_TIM_REG_BASE +
				TIMER_GLB_LOW_OFFSET);
		cur_tick = readl(IPROC_PERIPH_GLB_TIM_REG_BASE +
				 TIMER_GLB_HI_OFFSET);
	} while (cur_tick != count_h);

	return (cur_tick << 32) + count_l;
}

void timer_global_init(void)
{
	writel(0, IPROC_PERIPH_GLB_TIM_REG_BASE + TIMER_GLB_CTRL_OFFSET);
	writel(0, IPROC_PERIPH_GLB_TIM_REG_BASE + TIMER_GLB_LOW_OFFSET);
	writel(0, IPROC_PERIPH_GLB_TIM_REG_BASE + TIMER_GLB_HI_OFFSET);
	writel(TIMER_GLB_TIM_CTRL_TIM_EN,
	       IPROC_PERIPH_GLB_TIM_REG_BASE + TIMER_GLB_CTRL_OFFSET);
}

int timer_init(void)
{
	timer_global_init();
	return 0;
}

unsigned long get_timer(unsigned long base)
{
	uint64_t count;
	uint64_t ret;
	uint64_t tim_clk;
	uint64_t periph_clk;

	count = timer_global_read();

	/* default arm clk is 1GHz, periph_clk=arm_clk/2, tick per msec */
	periph_clk = 500000;
	tim_clk = lldiv(periph_clk,
			(((readl(IPROC_PERIPH_GLB_TIM_REG_BASE +
				 TIMER_GLB_CTRL_OFFSET) &
			TIMER_GLB_TIM_CTRL_PRESC_MASK) >> 8) + 1));

	ret = lldiv(count, (uint32_t)tim_clk);

	/* returns msec */
	return ret - base;
}

void __udelay(unsigned long usec)
{
	uint64_t cur_tick, end_tick;
	uint64_t tim_clk;
	uint64_t periph_clk;

	/* default arm clk is 1GHz, periph_clk=arm_clk/2, tick per usec */
	periph_clk = 500;

	tim_clk = lldiv(periph_clk,
			(((readl(IPROC_PERIPH_GLB_TIM_REG_BASE +
				 TIMER_GLB_CTRL_OFFSET) &
			TIMER_GLB_TIM_CTRL_PRESC_MASK) >> 8) + 1));

	cur_tick = timer_global_read();

	end_tick = tim_clk;
	end_tick *= usec;
	end_tick += cur_tick;

	do {
		cur_tick = timer_global_read();

	} while (cur_tick < end_tick);
}

void timer_systick_init(uint32_t tick_ms)
{
	/* Disable timer and clear interrupt status*/
	writel(0, IPROC_PERIPH_PVT_TIM_REG_BASE + TIMER_PVT_CTRL_OFFSET);
	writel(TIMER_PVT_TIM_INT_STATUS_SET,
	       IPROC_PERIPH_PVT_TIM_REG_BASE + TIMER_PVT_STATUS_OFFSET);
	writel((PLL_AXI_CLK/1000) * tick_ms,
	       IPROC_PERIPH_PVT_TIM_REG_BASE + TIMER_PVT_LOAD_OFFSET);
	writel(TIMER_PVT_TIM_CTRL_INT_EN |
	       TIMER_PVT_TIM_CTRL_AUTO_RELD |
	       TIMER_PVT_TIM_CTRL_TIM_EN,
	       IPROC_PERIPH_PVT_TIM_REG_BASE + TIMER_PVT_CTRL_OFFSET);
}

void timer_systick_isr(void *data)
{
	writel(TIMER_PVT_TIM_INT_STATUS_SET,
	       IPROC_PERIPH_PVT_TIM_REG_BASE + TIMER_PVT_STATUS_OFFSET);
}

/*
 * This function is derived from PowerPC code (read timebase as long long).
 * On ARM it just returns the timer value in msec.
 */
unsigned long long get_ticks(void)
{
	return get_timer(0);
}

/*
 * This is used in conjuction with get_ticks, which returns msec as ticks.
 * Here we just return ticks/sec = msec/sec = 1000
 */
ulong get_tbclk(void)
{
	return 1000;
}