/*
 * Copyright 2016 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include "imx7ulp.dtsi"

/ {
	model = "NXP i.MX7ULP EVK";
	compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp", "Generic DT based system";

	chosen {
		bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x402D0010,115200";
		stdout-path = &lpuart4;
	};

	bcmdhd_wlan_0: bcmdhd_wlan@0 {
		compatible = "android,bcmdhd_wlan";
		wlreg_on-supply = <&wlreg_on>;
		bcmdhd_fw = "/lib/firmware/bcm/1DX_BCM4343W/fw_bcmdhd.bin";
		bcmdhd_nv = "/lib/firmware/bcm/1DX_BCM4343W/bcmdhd.1DX.SDIO.cal";
	};

	memory {
		device_type = "memory";
		reg = <0x60000000 0x40000000>;
	};

	backlight {
		compatible = "gpio-backlight";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_backlight>;
		gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
		default-on;
		status = "okay";
	};

	mipi_dsi_reset: mipi-dsi-reset {
		compatible = "gpio-reset";
		reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
		reset-delay-us = <1000>;
		#reset-cells = <0>;
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		wlreg_on: fixedregulator@100 {
			compatible = "regulator-fixed";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			regulator-name = "wlreg_on";
			gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
			startup-delay-us = <100>;
			enable-active-high;
		};

		reg_usb_otg1_vbus: regulator@0 {
			compatible = "regulator-fixed";
			reg = <0>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_usb_otg1>;
			regulator-name = "usb_otg1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		reg_vsd_3v3: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "VSD_3V3";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		reg_vsd_3v3b: regulator@2 {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "VSD_3V3B";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};
	};

	extcon_usb1: extcon_usb1 {
		compatible = "linux,extcon-usb-gpio";
		id-gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_extcon_usb1>;
	};

	pf1550-rpmsg {
		compatible = "fsl,pf1550-rpmsg";
		sw1_reg: SW1 {
				regulator-name = "SW1";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <1387500>;
				regulator-boot-on;
				regulator-always-on;
		};

		sw2_reg: SW2 {
				regulator-name = "SW2";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <1387500>;
				regulator-boot-on;
				regulator-always-on;
		};

		sw3_reg: SW3 {
				regulator-name = "SW3";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
		};

		vref_reg: VREFDDR {
				regulator-name = "VREFDDR";
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;
				regulator-boot-on;
				regulator-always-on;
		};

		vldo1_reg: LDO1 {
				regulator-name = "LDO1";
				regulator-min-microvolt = <750000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
		};

		vldo2_reg: LDO2 {
				regulator-name = "LDO2";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
		};

		vldo3_reg: LDO3 {
				regulator-name = "LDO3";
				regulator-min-microvolt = <750000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
		};
	};
};

&iomuxc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog_1>;

	imx7ulp-evk {
		pinctrl_hog_1: hoggrp-1 {
			fsl,pins = <
				ULP1_PAD_PTC10__PTC10		0x30100		/* USDHC0 CD */
				ULP1_PAD_PTC1__PTC1		0x20100
				ULP1_PAD_PTD0__PTD0		0x30100		/* USDHC0 RST */
				ULP1_PAD_PTE13__PTE13		0x30103		/* USDHC1 CD */
				ULP1_PAD_PTE12__PTE12		0x30103		/* USDHC1 WP */
				ULP1_PAD_PTE14__SDHC1_VS	0x843		/* USDHC1 VSEL */
			>;
		};

		pinctrl_backlight: backlight_grp {
			fsl,pins = <
				ULP1_PAD_PTF2__PTF2		0x20100
			>;
		};

		pinctrl_lpi2c5: lpi2c5grp {
			fsl,pins = <
				ULP1_PAD_PTC4__LPI2C5_SCL       0x527
				ULP1_PAD_PTC5__LPI2C5_SDA       0x527
			>;
		};

		pinctrl_mipi_dsi_reset: mipi_dsi_reset_grp {
			fsl,pins = <
				ULP1_PAD_PTC19__PTC19		0x20103
			>;
		};

		pinctrl_lpuart4: lpuart4grp {
			fsl,pins = <
				ULP1_PAD_PTC3__LPUART4_RX	0x400
				ULP1_PAD_PTC2__LPUART4_TX	0x400
			>;
		};

		pinctrl_lpuart6: lpuart6grp {
			fsl,pins = <
				ULP1_PAD_PTE10__LPUART6_TX	0x400
				ULP1_PAD_PTE11__LPUART6_RX	0x400
				ULP1_PAD_PTE9__LPUART6_RTS_B	0x400
				ULP1_PAD_PTE8__LPUART6_CTS_B	0x400
				ULP1_PAD_PTE7__PTE7		0x00 /* BT_REG_ON */
			>;
		};

		pinctrl_lpuart7: lpuart7grp {
			fsl,pins = <
				ULP1_PAD_PTF14__LPUART7_TX	0x400
				ULP1_PAD_PTF15__LPUART7_RX	0x400
				ULP1_PAD_PTF13__LPUART7_RTS_B	0x400
				ULP1_PAD_PTF12__LPUART7_CTS_B	0x400
			>;
		};

		pinctrl_usdhc0: usdhc0grp {
			fsl,pins = <
				ULP1_PAD_PTD1__SDHC0_CMD	0x843
				ULP1_PAD_PTD2__SDHC0_CLK	0x10843
				ULP1_PAD_PTD7__SDHC0_D3		0x843
				ULP1_PAD_PTD8__SDHC0_D2		0x843
				ULP1_PAD_PTD9__SDHC0_D1		0x843
				ULP1_PAD_PTD10__SDHC0_D0	0x843
			>;
		};

		pinctrl_usdhc0_8bit: usdhc0grp_8bit {
			fsl,pins = <
				ULP1_PAD_PTD1__SDHC0_CMD	0x843
				ULP1_PAD_PTD2__SDHC0_CLK	0x843
				ULP1_PAD_PTD3__SDHC0_D7		0x843
				ULP1_PAD_PTD4__SDHC0_D6		0x843
				ULP1_PAD_PTD5__SDHC0_D5		0x843
				ULP1_PAD_PTD6__SDHC0_D4		0x843
				ULP1_PAD_PTD7__SDHC0_D3		0x843
				ULP1_PAD_PTD8__SDHC0_D2		0x843
				ULP1_PAD_PTD9__SDHC0_D1		0x843
				ULP1_PAD_PTD10__SDHC0_D0	0x843
			>;
		};

		pinctrl_lpi2c7: lpi2c7grp {
			fsl,pins = <
				ULP1_PAD_PTF12__LPI2C7_SCL	0x527
				ULP1_PAD_PTF13__LPI2C7_SDA	0x527
			>;
		};

		pinctrl_lpspi3: lpspi3grp {
			fsl,pins = <
				ULP1_PAD_PTF16__LPSPI3_SIN      0x300
				ULP1_PAD_PTF17__LPSPI3_SOUT     0x300
				ULP1_PAD_PTF18__LPSPI3_SCK      0x300
				ULP1_PAD_PTF19__LPSPI3_PCS0     0x300
			>;
		};

		pinctrl_usb_otg1: usbotg1grp {
			fsl,pins = <
				ULP1_PAD_PTC0__PTC0		0x30100
			>;
		};

		pinctrl_extcon_usb1: extcon1grp {
			fsl,pins = <
				ULP1_PAD_PTC8__PTC8		0x30103
			>;
		};

		pinctrl_usdhc1: usdhc1grp {
			fsl,pins = <
				ULP1_PAD_PTE3__SDHC1_CMD	0x843
				ULP1_PAD_PTE2__SDHC1_CLK	0x843
				ULP1_PAD_PTE1__SDHC1_D0		0x843
				ULP1_PAD_PTE0__SDHC1_D1		0x843
				ULP1_PAD_PTE5__SDHC1_D2		0x843
				ULP1_PAD_PTE4__SDHC1_D3		0x843
			>;
		};

		pinctrl_usdhc1_rst: usdhc1grp_rst {
			fsl,pins = <
				ULP1_PAD_PTE11__PTE11			0x30100	/* USDHC1 RST */
			>;
		};

		pinctrl_wifi: wifigrp {
			fsl,pins = <
				ULP1_PAD_PTE6__PTE6		0x43 /* WL_REG_ON */
			>;
		};
	};
};

&lcdif {
	status = "okay";
	disp-dev = "mipi_dsi_northwest";
	display = <&display0>;

	display0: display {
		bits-per-pixel = <16>;
		bus-width = <24>;

		display-timings {
			native-mode = <&timing0>;
			timing0: timing0 {
			clock-frequency = <9200000>;
			hactive = <480>;
			vactive = <272>;
			hfront-porch = <8>;
			hback-porch = <4>;
			hsync-len = <41>;
			vback-porch = <2>;
			vfront-porch = <4>;
			vsync-len = <10>;

			hsync-active = <0>;
			vsync-active = <0>;
			de-active = <1>;
			pixelclk-active = <0>;
			};
		};
	};
};

&lpi2c7 {
	#address-cells = <1>;
	#size-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpi2c7>;
};

&lpi2c5 {
	#address-cells = <1>;
	#size-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpi2c5>;
	status = "okay";

	fxas2100x@20 {
		compatible = "fsl,fxas2100x";
		reg = <0x20>;
	};

	fxos8700@1e {
		compatible = "fsl,fxos8700";
		reg = <0x1e>;
	};

	mpl3115@60 {
		compatible = "fsl,mpl3115";
		reg = <0x60>;
	};
};

&lpspi3 {
	#address-cells = <1>;
	#size-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpspi3>;
	status = "okay";

	spidev0: spi@0 {
		reg = <0>;
		compatible = "rohm,dh2228fv";
		spi-max-frequency = <1000000>;
	};
};

&mipi_dsi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_mipi_dsi_reset>;
	lcd_panel = "TRULY-WVGA-TFT3P5581E";
	resets = <&mipi_dsi_reset>;
	status = "okay";
};

&lpuart4 { /* console */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpuart4>;
	status = "okay";
};

&lpuart6 { /* BT */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpuart6>;
	status = "okay";
};

&lpuart7 { /* Uart test */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpuart7>;
	status = "disabled";
};

&rpmsg{
	status = "okay";
};

&usbotg1 {
	vbus-supply = <&reg_usb_otg1_vbus>;
	extcon = <0>, <&extcon_usb1>;
	srp-disable;
	hnp-disable;
	adp-disable;
	status = "okay";
};

&usdhc0 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
	pinctrl-0 = <&pinctrl_usdhc0>;
	pinctrl-1 = <&pinctrl_usdhc0>;
	pinctrl-2 = <&pinctrl_usdhc0>;
	pinctrl-3 = <&pinctrl_usdhc0>;
	cd-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	vmmc-supply = <&reg_vsd_3v3>;
	vqmmc-supply = <&vldo2_reg>;
	status = "okay";
};