| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2017 Linaro |
| * Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> |
| */ |
| |
| #ifndef __HI3798cv200_H__ |
| #define __HI3798cv200_H__ |
| |
| #define REG_BASE_PERI_CTRL 0xF8A20000 |
| #define REG_BASE_CRG 0xF8A22000 |
| |
| /* DEVICES */ |
| #define REG_BASE_MCI 0xF9830000 |
| #define REG_BASE_UART0 0xF8B00000 |
| |
| /* PERI control registers (4KB) */ |
| /* USB2 PHY01 configuration register */ |
| #define PERI_CTRL_USB0 (REG_BASE_PERI_CTRL + 0x120) |
| |
| /* PERI CRG registers (4KB) */ |
| /* USB2 CTRL0 clock and soft reset */ |
| #define PERI_CRG46 (REG_BASE_CRG + 0xb8) |
| #define USB2_BUS_CKEN (1<<0) |
| #define USB2_OHCI48M_CKEN (1<<1) |
| #define USB2_OHCI12M_CKEN (1<<2) |
| #define USB2_OTG_UTMI_CKEN (1<<3) |
| #define USB2_HST_PHY_CKEN (1<<4) |
| #define USB2_UTMI0_CKEN (1<<5) |
| #define USB2_BUS_SRST_REQ (1<<12) |
| #define USB2_UTMI0_SRST_REQ (1<<13) |
| #define USB2_HST_PHY_SYST_REQ (1<<16) |
| #define USB2_OTG_PHY_SYST_REQ (1<<17) |
| #define USB2_CLK48_SEL (1<<20) |
| |
| /* USB2 PHY clock and soft reset */ |
| #define PERI_CRG47 (REG_BASE_CRG + 0xbc) |
| #define USB2_PHY01_REF_CKEN (1 << 0) |
| #define USB2_PHY2_REF_CKEN (1 << 2) |
| #define USB2_PHY01_SRST_REQ (1 << 4) |
| #define USB2_PHY2_SRST_REQ (1 << 6) |
| #define USB2_PHY01_SRST_TREQ0 (1 << 8) |
| #define USB2_PHY01_SRST_TREQ1 (1 << 9) |
| #define USB2_PHY2_SRST_TREQ (1 << 10) |
| #define USB2_PHY01_REFCLK_SEL (1 << 12) |
| #define USB2_PHY2_REFCLK_SEL (1 << 14) |
| |
| |
| #endif |
