| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright 2007 Freescale Semiconductor, Inc. | |
| * | |
| * (C) Copyright 2000 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| */ | |
| #include <common.h> | |
| #include <linux/libfdt.h> | |
| #include <fdt_support.h> | |
| #include <asm/processor.h> | |
| extern void ft_qe_setup(void *blob); | |
| DECLARE_GLOBAL_DATA_PTR; | |
| #if defined(CONFIG_BOOTCOUNT_LIMIT) && \ | |
| (defined(CONFIG_QE) && !defined(CONFIG_MPC831x)) | |
| #include <linux/immap_qe.h> | |
| void fdt_fixup_muram (void *blob) | |
| { | |
| ulong data[2]; | |
| data[0] = 0; | |
| data[1] = QE_MURAM_SIZE - 2 * sizeof(unsigned long); | |
| do_fixup_by_compat(blob, "fsl,qe-muram-data", "reg", | |
| data, sizeof (data), 0); | |
| } | |
| #endif | |
| void ft_cpu_setup(void *blob, bd_t *bd) | |
| { | |
| immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; | |
| int spridr = immr->sysconf.spridr; | |
| /* | |
| * delete crypto node if not on an E-processor | |
| * initial revisions of the MPC834xE/6xE have the original SEC 2.0. | |
| * EA revisions got the SEC uprevved to 2.4 but since the default device | |
| * tree contains SEC 2.0 properties we uprev them here. | |
| */ | |
| if (!IS_E_PROCESSOR(spridr)) | |
| fdt_fixup_crypto_node(blob, 0); | |
| else if (IS_E_PROCESSOR(spridr) && | |
| (SPR_FAMILY(spridr) == SPR_834X_FAMILY || | |
| SPR_FAMILY(spridr) == SPR_836X_FAMILY) && | |
| REVID_MAJOR(spridr) >= 2) | |
| fdt_fixup_crypto_node(blob, 0x0204); | |
| #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\ | |
| defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\ | |
| defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5) | |
| #ifdef CONFIG_MPC8313 | |
| /* | |
| * mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1 | |
| * h/w (see AN3545). The base device tree in use has rev. 1 ID numbers, | |
| * so if on Rev. 2 (and higher) h/w, we fix them up here | |
| */ | |
| if (REVID_MAJOR(immr->sysconf.spridr) >= 2) { | |
| int nodeoffset, path; | |
| const char *prop; | |
| nodeoffset = fdt_path_offset(blob, "/aliases"); | |
| if (nodeoffset >= 0) { | |
| #if defined(CONFIG_HAS_ETH0) | |
| prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL); | |
| if (prop) { | |
| u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 }; | |
| path = fdt_path_offset(blob, prop); | |
| prop = fdt_getprop(blob, path, "interrupts", | |
| NULL); | |
| if (prop) | |
| fdt_setprop(blob, path, "interrupts", | |
| &tmp, sizeof(tmp)); | |
| } | |
| #endif | |
| #if defined(CONFIG_HAS_ETH1) | |
| prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL); | |
| if (prop) { | |
| u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 }; | |
| path = fdt_path_offset(blob, prop); | |
| prop = fdt_getprop(blob, path, "interrupts", | |
| NULL); | |
| if (prop) | |
| fdt_setprop(blob, path, "interrupts", | |
| &tmp, sizeof(tmp)); | |
| } | |
| #endif | |
| } | |
| } | |
| #endif | |
| #endif | |
| do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, | |
| "timebase-frequency", (bd->bi_busfreq / 4), 1); | |
| do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, | |
| "bus-frequency", bd->bi_busfreq, 1); | |
| do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, | |
| "clock-frequency", gd->arch.core_clk, 1); | |
| do_fixup_by_prop_u32(blob, "device_type", "soc", 4, | |
| "bus-frequency", bd->bi_busfreq, 1); | |
| do_fixup_by_compat_u32(blob, "fsl,soc", | |
| "bus-frequency", bd->bi_busfreq, 1); | |
| do_fixup_by_compat_u32(blob, "fsl,soc", | |
| "clock-frequency", bd->bi_busfreq, 1); | |
| do_fixup_by_compat_u32(blob, "fsl,immr", | |
| "bus-frequency", bd->bi_busfreq, 1); | |
| do_fixup_by_compat_u32(blob, "fsl,immr", | |
| "clock-frequency", bd->bi_busfreq, 1); | |
| #ifdef CONFIG_QE | |
| ft_qe_setup(blob); | |
| #endif | |
| #ifdef CONFIG_SYS_NS16550 | |
| do_fixup_by_compat_u32(blob, "ns16550", | |
| "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); | |
| #endif | |
| fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); | |
| #if defined(CONFIG_BOOTCOUNT_LIMIT) && \ | |
| (defined(CONFIG_QE) && !defined(CONFIG_MPC831x)) | |
| fdt_fixup_muram (blob); | |
| #endif | |
| } |