# This file contains help messages for missing external blobs. Each message has
# a tag (MUST be just lower-case text, digits and hyphens) starting in column 1,
# followed by a colon (:) to indicate its start. The message can include any
# number of lines, including blank lines.
#
# When looking for a tag, Binman uses the value of 'missing-msg' for the entry,
# the entry name or the entry type, in that order

atf-bl31:
See the documentation for your board. You may need to build ARM Trusted
Firmware and build with BL31=/path/to/bl31.bin

atf-bl31-sunxi:
Please read the section on ARM Trusted Firmware (ATF) in
board/sunxi/README.sunxi64

iot2050-otpcmd:
See the documentation for IOT2050 board. Your image is missing OTP command data
block which is used for provisioning the customer keys to the board.
Please refer to
meta-iot2050/tree/master/recipes-bsp/secure-boot-otp-provisioning/files/make-otpcmd.sh
for how to generate this binary. If you are not using secure boot or do not
intend to provision the keys, disable CONFIG_IOT2050_EMBED_OTPCMD.

iot2050-seboot:
See the documentation for IOT2050 board. Your image is missing SEBoot
which is mandatory for board startup. Prebuilt SEBoot located at
meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/seboot_pg*.bin.

k3-rti-wdt-firmware:
If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for
the R5F core(s) to trigger the system reset. One possible source is
https://github.com/siemens/k3-rti-wdt.

opensbi:
See the documentation for your board. The OpenSBI git repo is at
https://github.com/riscv/opensbi.git
You may need to build fw_dynamic.bin first and re-build u-boot with
OPENSBI=/path/to/fw_dynamic.bin

rockchip-tpl:
An external TPL is required to initialize DRAM. Get the external TPL
binary and build with ROCKCHIP_TPL=/path/to/ddr.bin. One possible source
for the external TPL binary is https://github.com/rockchip-linux/rkbin.

scp-sunxi:
SCP firmware is required for system suspend, but is otherwise optional.
Please read the section on SCP firmware in board/sunxi/README.sunxi64

sysfw-inner-cert:
You are missing the inner certificate for TI's Foundational Security (TIFS)
firmware which is critical to authenticating the TIFS firmware during boot.
HS-FS and HS-SE parts will not boot without this certificate.

Have a look at your board's documentation to find and include the latest
TIFS certificate blobs and how to include them in the build.

    https://docs.u-boot.org/en/latest/board/ti/k3.html

tee-os:
See the documentation for your board. You may need to build Open Portable
Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin

ti-dm:
You are missing TI's Device Management (DM) firmware which is critical to
provide resource and power management services for your board. Your board
will not boot without this firmware.

Have a look at your board's documentation to find the latest version of
the DM firmware binary and how to include it in the build.

    https://docs.u-boot.org/en/latest/board/ti/k3.html

ti-fs-enc.bin:
You are missing TI's Foundational Security (TIFS) firmware which is
critical to provide foundational security services like authenticated boot,
and firewall management for the SoC. Your board will not boot without
this firmware.

Have a look at your board's documentation to find the latest version of the
TIFS firmware binary and how to include them in the build.

    https://docs.u-boot.org/en/latest/board/ti/k3.html