blob: 5ae491d7380386ec48f4aaf63fe5ec21ba6d0223 [file] [log] [blame]
if ARCH_SUNXI
choice
prompt "Sunxi SoC Variant"
config MACH_SUN4I
bool "sun4i (Allwinner A10)"
select CPU_V7
select SUPPORT_SPL
config MACH_SUN5I
bool "sun5i (Allwinner A13)"
select CPU_V7
select SUPPORT_SPL
config MACH_SUN6I
bool "sun6i (Allwinner A31)"
select CPU_V7
select SUPPORT_SPL
config MACH_SUN7I
bool "sun7i (Allwinner A20)"
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
config MACH_SUN8I
bool "sun8i (Allwinner A23)"
select CPU_V7
endchoice
config SYS_CONFIG_NAME
default "sun4i" if MACH_SUN4I
default "sun5i" if MACH_SUN5I
default "sun6i" if MACH_SUN6I
default "sun7i" if MACH_SUN7I
default "sun8i" if MACH_SUN8I
choice
prompt "Board"
config TARGET_A10_OLINUXINO_L
bool "A10_OLINUXINO_L"
depends on MACH_SUN4I
config TARGET_A10S_OLINUXINO_M
bool "A10S_OLINUXINO_M"
depends on MACH_SUN5I
config TARGET_A13_OLINUXINOM
bool "A13_OLINUXINOM"
depends on MACH_SUN5I
config TARGET_A13_OLINUXINO
bool "A13_OLINUXINO"
depends on MACH_SUN5I
config TARGET_A20_OLINUXINO_L2
bool "A20_OLINUXINO_L2"
depends on MACH_SUN7I
config TARGET_A20_OLINUXINO_L
bool "A20_OLINUXINO_L"
depends on MACH_SUN7I
config TARGET_A20_OLINUXINO_M
bool "A20_OLINUXINO_M"
depends on MACH_SUN7I
config TARGET_AUXTEK_T004
bool "AUXTEK_T004"
depends on MACH_SUN5I
config TARGET_BANANAPI
bool "BANANAPI"
depends on MACH_SUN7I
config TARGET_COLOMBUS
bool "COLOMBUS"
depends on MACH_SUN6I
config TARGET_CUBIEBOARD2
bool "CUBIEBOARD2"
depends on MACH_SUN7I
config TARGET_CUBIEBOARD
bool "CUBIEBOARD"
depends on MACH_SUN4I
config TARGET_CUBIETRUCK
bool "CUBIETRUCK"
depends on MACH_SUN7I
config TARGET_IPPO_Q8H_V5
bool "IPPO_Q8H_V5"
depends on MACH_SUN8I
config TARGET_PCDUINO3
bool "PCDUINO3"
depends on MACH_SUN7I
config TARGET_MELE_A1000G
bool "MELE_A1000G"
depends on MACH_SUN4I
config TARGET_MELE_A1000
bool "MELE_A1000"
depends on MACH_SUN4I
config TARGET_MELE_M3
bool "MELE_M3"
depends on MACH_SUN7I
config TARGET_MELE_M9
bool "MELE_M9"
depends on MACH_SUN6I
config TARGET_MINI_X_1GB
bool "MINI_X_1GB"
depends on MACH_SUN4I
config TARGET_MINI_X
bool "MINI_X"
depends on MACH_SUN4I
config TARGET_BA10_TV_BOX
bool "BA10_TV_BOX"
depends on MACH_SUN4I
config TARGET_I12_TVBOX
bool "I12_TVBOX"
depends on MACH_SUN7I
config TARGET_QT840A
bool "QT840A"
depends on MACH_SUN7I
config TARGET_R7DONGLE
bool "R7DONGLE"
depends on MACH_SUN5I
endchoice
config SYS_BOARD
default "sunxi"
config SYS_SOC
default "sunxi"
config SPL_FEL
bool "SPL/FEL mode support"
depends on SPL
default n
config FDTFILE
string "Default fdtfile env setting for this board"
config OLD_SUNXI_KERNEL_COMPAT
boolean "Enable workarounds for booting old kernels"
default n
---help---
Set this to enable various workarounds for old kernels, this results in
sub-optimal settings for newer kernels, only enable if needed.
config MMC0_CD_PIN
string "Card detect pin for mmc0"
default ""
---help---
Set the card detect pin for mmc0, leave empty to not use cd. This
takes a string in the format understood by sunxi_name_to_gpio, e.g.
PH1 for pin 1 of port H.
config MMC1_CD_PIN
string "Card detect pin for mmc1"
default ""
---help---
See MMC0_CD_PIN help text.
config MMC2_CD_PIN
string "Card detect pin for mmc2"
default ""
---help---
See MMC0_CD_PIN help text.
config MMC3_CD_PIN
string "Card detect pin for mmc3"
default ""
---help---
See MMC0_CD_PIN help text.
config MMC_SUNXI_SLOT_EXTRA
int "mmc extra slot number"
default -1
---help---
sunxi builds always enable mmc0, some boards also have a second sdcard
slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
support for this.
config USB1_VBUS_PIN
string "Vbus enable pin for usb1 (ehci0)"
default "PH6" if MACH_SUN4I || MACH_SUN7I
default "PH27" if MACH_SUN6I
---help---
Set the Vbus enable pin for usb1 (ehci0, usb0 is the otg). This takes
a string in the format understood by sunxi_name_to_gpio, e.g.
PH1 for pin 1 of port H.
config USB2_VBUS_PIN
string "Vbus enable pin for usb2 (ehci1)"
default "PH3" if MACH_SUN4I || MACH_SUN7I
default "PH24" if MACH_SUN6I
---help---
See USB1_VBUS_PIN help text.
config VIDEO
boolean "Enable graphical uboot console on HDMI"
default y
---help---
Say Y here to add support for using a cfb console on the HDMI output
found on most sunxi devices.
config USB_KEYBOARD
boolean "Enable USB keyboard support"
default y
---help---
Say Y here to add support for using a USB keyboard (typically used
in combination with a graphical console on HDMI).
endif