blob: ec0156d8aa9b8073555bbe00f5836f4e0883fe1c [file] [log] [blame]
#
# Copyright (C) 2012 Samsung Electronics
#
# Lukasz Majewski <l.majewski@samsung.com>
#
#
# SPDX-License-Identifier: GPL-2.0+
Glossary:
========
- UUID -(Universally Unique Identifier)
- GUID - (Globally Unique ID)
- EFI - (Extensible Firmware Interface)
- UEFI - (Unified EFI) - EFI evolution
- GPT (GUID Partition Table) - it is the EFI standard part
- partitions - lists of available partitions (defined at u-boot):
./include/configs/{target}.h
Introduction:
=============
This document describes the GPT partition table format and usage of
the gpt command in u-boot.
UUID introduction:
====================
GPT for marking disks/partitions is using the UUID. It is supposed to be a
globally unique value. A UUID is a 16-byte (128-bit) number. The number of
theoretically possible UUIDs is therefore about 3 x 10^38.
More often UUID is displayed as 32 hexadecimal digits, in 5 groups,
separated by hyphens, in the form 8-4-4-4-12 for a total of 36 characters
(32 digits and 4 hyphens)
For instance, GUID of Linux data partition: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
Historically there are 5 methods to generate this number. The oldest one is
combining machine's MAC address and timer (epoch) value.
Successive versions are using MD5 hash, random numbers and SHA-1 hash. All major
OSes and programming languages are providing libraries to compute UUID (e.g.
uuid command line tool).
GPT brief explanation:
======================
Layout:
-------
--------------------------------------------------
LBA 0 |Protective MBR |
----------------------------------------------------------
LBA 1 |Primary GPT Header | Primary
-------------------------------------------------- GPT
LBA 2 |Entry 1|Entry 2| Entry 3| Entry 4|
--------------------------------------------------
LBA 3 |Entries 5 - 128 |
| |
| |
----------------------------------------------------------
LBA 34 |Partition 1 |
| |
-----------------------------------
|Partition 2 |
| |
-----------------------------------
|Partition n |
| |
----------------------------------------------------------
LBA -34 |Entry 1|Entry 2| Entry 3| Entry 4| Backup
-------------------------------------------------- GPT
LBA -33 |Entries 5 - 128 |
| |
| |
LBA -2 | |
--------------------------------------------------
LBA -1 |Backup GPT Header |
----------------------------------------------------------
For a legacy reasons, GPT's LBA 0 sector has a MBR structure. It is called
"protective MBR".
Its first partition entry ID has 0xEE value, and disk software, which is not
handling the GPT sees it as a storage device without free space.
It is possible to define 128 linearly placed partition entries.
"LBA -1" means the last addressable block (in the mmc subsystem:
"dev_desc->lba - 1")
Primary/Backup GPT header:
----------------------------
Offset Size Description
0 8 B Signature ("EFI PART", 45 46 49 20 50 41 52 54)
8 4 B Revision (For version 1.0, the value is 00 00 01 00)
12 4 B Header size (in bytes, usually 5C 00 00 00 meaning 92 bytes)
16 4 B CRC32 of header (0 to header size), with this field zeroed
during calculation
20 4 B Reserved (ZERO);
24 8 B Current LBA (location of this header copy)
32 8 B Backup LBA (location of the other header copy)
40 8 B First usable LBA for partitions (primary partition table last
LBA + 1)
48 8 B Last usable LBA (secondary partition table first LBA - 1)
56 16 B Disk GUID (also referred as UUID on UNIXes)
72 8 B Partition entries starting LBA (always 2 in primary copy)
80 4 B Number of partition entries
84 4 B Size of a partition entry (usually 128)
88 4 B CRC32 of partition array
92 * Reserved; must be ZERO (420 bytes for a 512-byte LBA)
TOTAL: 512 B
IMPORTANT:
GPT headers and partition entries are protected by CRC32 (the POSIX CRC32).
Primary GPT header and Backup GPT header have swapped values of "Current LBA"
and "Backup LBA" and therefore different CRC32 check-sum.
CRC32 for GPT headers (field "CRC of header") are calculated up till
"Header size" (92), NOT 512 bytes.
CRC32 for partition entries (field "CRC32 of partition array") is calculated for
the whole array entry ( Number_of_partition_entries *
sizeof(partition_entry_size (usually 128)))
Observe, how Backup GPT is placed in the memory. It is NOT a mirror reflect
of the Primary.
Partition Entry Format:
----------------------
Offset Size Description
0 16 B Partition type GUID (Big Endian)
16 16 B Unique partition GUID in (Big Endian)
32 8 B First LBA (Little Endian)
40 8 B Last LBA (inclusive)
48 8 B Attribute flags [+]
56 72 B Partition name (text)
Attribute flags:
Bit 0 - System partition
Bit 60 - Read-only
Bit 62 - Hidden
Bit 63 - Not mount
Creating GPT partitions in U-Boot:
==============
To restore GUID partition table one needs to:
1. Define partition layout in the environment.
Format of partitions layout:
"partitions=uuid_disk=...;name=u-boot,size=60MiB,uuid=...;
name=kernel,size=60MiB,uuid=...;"
or
"partitions=uuid_disk=${uuid_gpt_disk};name=${uboot_name},
size=${uboot_size},uuid=${uboot_uuid};"
Fields 'name', 'size' and 'uuid' are mandatory for every partition.
The field 'start' is optional.
option: CONFIG_RANDOM_UUID
If any partition "UUID" no exists then it is randomly generated.
2. Define 'CONFIG_EFI_PARTITION' and 'CONFIG_CMD_GPT'
2. From u-boot prompt type:
gpt write mmc 0 $partitions
Useful info:
============
Two programs, namely: 'gdisk' and 'parted' are recommended to work with GPT
recovery. Both are able to handle GUID partitions.
Please, pay attention at -l switch for parted.
"uuid" program is recommended to generate UUID string. Moreover it can decode
(-d switch) passed in UUID string. It can be used to generate partitions UUID
passed to u-boot environment variables.
If optional CONFIG_RANDOM_UUID is defined then for any partition which environment
uuid is unset, uuid is randomly generated and stored in correspond environment
variable.
note:
Each string block of UUID generated by program "uuid" is in big endian and it is
also stored in big endian in disk GPT.
Partitions layout can be printed by typing "mmc part". Note that each partition
GUID has different byte order than UUID generated before, this is because first
three blocks of GUID string are in Little Endian.