blob: 29521359a50da56e1017e2580ab6e6e33b1bfd9d [file] [log] [blame]
/*
* NAND boot for Freescale Enhanced Local Bus Controller, Flash Control Machine
*
* (C) Copyright 2006-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* Copyright (c) 2008 Freescale Semiconductor, Inc.
* Author: Scott Wood <scottwood@freescale.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/fsl_lbc.h>
#include <nand.h>
#define WINDOW_SIZE 8192
static void nand_wait(void)
{
fsl_lbc_t *regs = LBC_BASE_ADDR;
for (;;) {
uint32_t status = in_be32(&regs->ltesr);
if (status == 1)
return;
if (status & 1) {
puts("read failed (ltesr)\n");
for (;;);
}
}
}
#ifdef CONFIG_TPL_BUILD
int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
#else
static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
#endif
{
fsl_lbc_t *regs = LBC_BASE_ADDR;
uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
const int large = CONFIG_SYS_NAND_OR_PRELIM & OR_FCM_PGS;
const int block_shift = large ? 17 : 14;
const int block_size = 1 << block_shift;
const int page_size = large ? 2048 : 512;
const int bad_marker = large ? page_size + 0 : page_size + 5;
int fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT) | 2;
int pos = 0;
char *dst = vdst;
if (offs & (block_size - 1)) {
puts("bad offset\n");
for (;;);
}
if (large) {
fmr |= FMR_ECCM;
out_be32(&regs->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
(NAND_CMD_READSTART << FCR_CMD1_SHIFT));
out_be32(&regs->fir,
(FIR_OP_CW0 << FIR_OP0_SHIFT) |
(FIR_OP_CA << FIR_OP1_SHIFT) |
(FIR_OP_PA << FIR_OP2_SHIFT) |
(FIR_OP_CW1 << FIR_OP3_SHIFT) |
(FIR_OP_RBW << FIR_OP4_SHIFT));
} else {
out_be32(&regs->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT);
out_be32(&regs->fir,
(FIR_OP_CW0 << FIR_OP0_SHIFT) |
(FIR_OP_CA << FIR_OP1_SHIFT) |
(FIR_OP_PA << FIR_OP2_SHIFT) |
(FIR_OP_RBW << FIR_OP3_SHIFT));
}
out_be32(&regs->fbcr, 0);
clrsetbits_be32(&regs->bank[0].br, BR_DECC, BR_DECC_CHK_GEN);
while (pos < uboot_size) {
int i = 0;
out_be32(&regs->fbar, offs >> block_shift);
do {
int j;
unsigned int page_offs = (offs & (block_size - 1)) << 1;
out_be32(&regs->ltesr, ~0);
out_be32(&regs->lteatr, 0);
out_be32(&regs->fpar, page_offs);
out_be32(&regs->fmr, fmr);
out_be32(&regs->lsor, 0);
nand_wait();
page_offs %= WINDOW_SIZE;
/*
* If either of the first two pages are marked bad,
* continue to the next block.
*/
if (i++ < 2 && buf[page_offs + bad_marker] != 0xff) {
puts("skipping\n");
offs = (offs + block_size) & ~(block_size - 1);
pos &= ~(block_size - 1);
break;
}
for (j = 0; j < page_size; j++)
dst[pos + j] = buf[page_offs + j];
pos += page_size;
offs += page_size;
} while ((offs & (block_size - 1)) && (pos < uboot_size));
}
return 0;
}
/*
* Defines a static function nand_load_image() here, because non-static makes
* the code too large for certain SPLs(minimal SPL, maximum size <= 4Kbytes)
*/
#ifndef CONFIG_TPL_BUILD
#define nand_spl_load_image(offs, uboot_size, vdst) \
nand_load_image(offs, uboot_size, vdst)
#endif
/*
* The main entry for NAND booting. It's necessary that SDRAM is already
* configured and available since this code loads the main U-Boot image
* from NAND into SDRAM and starts it from there.
*/
void nand_boot(void)
{
__attribute__((noreturn)) void (*uboot)(void);
/*
* Load U-Boot image from NAND into RAM
*/
nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
CONFIG_SYS_NAND_U_BOOT_SIZE,
(void *)CONFIG_SYS_NAND_U_BOOT_DST);
#ifdef CONFIG_NAND_ENV_DST
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(void *)CONFIG_NAND_ENV_DST);
#ifdef CONFIG_ENV_OFFSET_REDUND
nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
(void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
#endif
#endif
#ifdef CONFIG_SPL_FLUSH_IMAGE
/*
* Clean d-cache and invalidate i-cache, to
* make sure that no stale data is executed.
*/
flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
#endif
puts("transfering control\n");
/*
* Jump to U-Boot image
*/
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
(*uboot)();
}