<?xml version="1.0"?> | |
<doc> | |
<assembly> | |
<name>Microsoft.Deployment.Compression.Zip</name> | |
</assembly> | |
<members> | |
<member name="T:Microsoft.Deployment.Compression.Zip.ConcatStream"> | |
<summary> | |
Used to trick a DeflateStream into reading from or writing to | |
a series of (chunked) streams instead of a single steream. | |
</summary> | |
</member> | |
<member name="T:Microsoft.Deployment.Compression.Zip.CrcStream"> | |
<summary> | |
Wraps a source stream and calcaluates a CRC over all bytes that are read or written. | |
</summary> | |
<remarks> | |
The CRC algorithm matches that used in the standard ZIP file format. | |
</remarks> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.CrcStream.#ctor(System.IO.Stream)"> | |
<summary> | |
Creates a new CrcStream instance from a source stream. | |
</summary> | |
<param name="source">Underlying stream where bytes will be read from or written to.</param> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.CrcStream.Seek(System.Int64,System.IO.SeekOrigin)"> | |
<summary> | |
Sets the position within the source stream. | |
</summary> | |
<param name="offset">A byte offset relative to the origin parameter.</param> | |
<param name="origin">A value of type SeekOrigin indicating | |
the reference point used to obtain the new position.</param> | |
<returns>The new position within the source stream.</returns> | |
<remarks> | |
Note the CRC is only calculated over bytes that are actually read or | |
written, so any bytes skipped by seeking will not contribute to the CRC. | |
</remarks> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.CrcStream.SetLength(System.Int64)"> | |
<summary> | |
Sets the length of the source stream. | |
</summary> | |
<param name="value">The desired length of the | |
stream in bytes.</param> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.CrcStream.Read(System.Byte[],System.Int32,System.Int32)"> | |
<summary> | |
Reads a sequence of bytes from the source stream and advances | |
the position within the stream by the number of bytes read. | |
</summary> | |
<param name="buffer">An array of bytes. When this method returns, the buffer | |
contains the specified byte array with the values between offset and | |
(offset + count - 1) replaced by the bytes read from the current source.</param> | |
<param name="offset">The zero-based byte offset in buffer at which to begin | |
storing the data read from the current stream.</param> | |
<param name="count">The maximum number of bytes to be read from the current stream.</param> | |
<returns>The total number of bytes read into the buffer. This can be less | |
than the number of bytes requested if that many bytes are not currently available, | |
or zero (0) if the end of the stream has been reached.</returns> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.CrcStream.Write(System.Byte[],System.Int32,System.Int32)"> | |
<summary> | |
Writes a sequence of bytes to the source stream and advances the | |
current position within this stream by the number of bytes written. | |
</summary> | |
<param name="buffer">An array of bytes. This method copies count | |
bytes from buffer to the current stream.</param> | |
<param name="offset">The zero-based byte offset in buffer at which | |
to begin copying bytes to the current stream.</param> | |
<param name="count">The number of bytes to be written to the | |
current stream.</param> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.CrcStream.Flush"> | |
<summary> | |
Flushes the source stream. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.CrcStream.Close"> | |
<summary> | |
Closes the underlying stream. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.CrcStream.UpdateCrc(System.Byte[],System.Int32,System.Int32)"> | |
<summary> | |
Updates the CRC with a range of bytes that were read or written. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.CrcStream.MakeCrcTable"> | |
<summary> | |
Computes a table that speeds up calculation of the CRC. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.CrcStream.Reflect(System.UInt32,System.Int32)"> | |
<summary> | |
Reflects the ordering of certain number of bits. For exmample when reflecting | |
one byte, bit one is swapped with bit eight, bit two with bit seven, etc. | |
</summary> | |
</member> | |
<member name="P:Microsoft.Deployment.Compression.Zip.CrcStream.Crc"> | |
<summary> | |
Gets the current CRC over all bytes that have been read or written | |
since this instance was created. | |
</summary> | |
</member> | |
<member name="P:Microsoft.Deployment.Compression.Zip.CrcStream.Source"> | |
<summary> | |
Gets the underlying stream that this stream reads from or writes to. | |
</summary> | |
</member> | |
<member name="P:Microsoft.Deployment.Compression.Zip.CrcStream.CanRead"> | |
<summary> | |
Gets a value indicating whether the source stream supports reading. | |
</summary> | |
<value>true if the stream supports reading; otherwise, false.</value> | |
</member> | |
<member name="P:Microsoft.Deployment.Compression.Zip.CrcStream.CanWrite"> | |
<summary> | |
Gets a value indicating whether the source stream supports writing. | |
</summary> | |
<value>true if the stream supports writing; otherwise, false.</value> | |
</member> | |
<member name="P:Microsoft.Deployment.Compression.Zip.CrcStream.CanSeek"> | |
<summary> | |
Gets a value indicating whether the source stream supports seeking. | |
</summary> | |
<value>true if the stream supports seeking; otherwise, false.</value> | |
</member> | |
<member name="P:Microsoft.Deployment.Compression.Zip.CrcStream.Length"> | |
<summary> | |
Gets the length of the source stream. | |
</summary> | |
</member> | |
<member name="P:Microsoft.Deployment.Compression.Zip.CrcStream.Position"> | |
<summary> | |
Gets or sets the position of the source stream. | |
</summary> | |
</member> | |
<member name="T:Microsoft.Deployment.Compression.Zip.ZipCompressionMethod"> | |
<summary> | |
Identifies the compression method or "algorithm" | |
used for a single file within a zip archive. | |
</summary> | |
<remarks> | |
Proprietary zip implementations may define additional compression | |
methods outside of those included here. | |
</remarks> | |
</member> | |
<member name="F:Microsoft.Deployment.Compression.Zip.ZipCompressionMethod.Store"> | |
<summary> | |
The file is stored (no compression) | |
</summary> | |
</member> | |
<member name="F:Microsoft.Deployment.Compression.Zip.ZipCompressionMethod.Shrink"> | |
<summary> | |
The file is Shrunk | |
</summary> | |
</member> | |
<member name="F:Microsoft.Deployment.Compression.Zip.ZipCompressionMethod.Reduce1"> | |
<summary> | |
The file is Reduced with compression factor 1 | |
</summary> | |
</member> | |
<member name="F:Microsoft.Deployment.Compression.Zip.ZipCompressionMethod.Reduce2"> | |
<summary> | |
The file is Reduced with compression factor 2 | |
</summary> | |
</member> | |
<member name="F:Microsoft.Deployment.Compression.Zip.ZipCompressionMethod.Reduce3"> | |
<summary> | |
The file is Reduced with compression factor 3 | |
</summary> | |
</member> | |
<member name="F:Microsoft.Deployment.Compression.Zip.ZipCompressionMethod.Reduce4"> | |
<summary> | |
The file is Reduced with compression factor 4 | |
</summary> | |
</member> | |
<member name="F:Microsoft.Deployment.Compression.Zip.ZipCompressionMethod.Implode"> | |
<summary> | |
The file is Imploded | |
</summary> | |
</member> | |
<member name="F:Microsoft.Deployment.Compression.Zip.ZipCompressionMethod.Deflate"> | |
<summary> | |
The file is Deflated; | |
the most common and widely-compatible form of zip compression. | |
</summary> | |
</member> | |
<member name="F:Microsoft.Deployment.Compression.Zip.ZipCompressionMethod.Deflate64"> | |
<summary> | |
The file is Deflated using the enhanced Deflate64 method. | |
</summary> | |
</member> | |
<member name="F:Microsoft.Deployment.Compression.Zip.ZipCompressionMethod.BZip2"> | |
<summary> | |
The file is compressed using the BZIP2 algorithm. | |
</summary> | |
</member> | |
<member name="F:Microsoft.Deployment.Compression.Zip.ZipCompressionMethod.Lzma"> | |
<summary> | |
The file is compressed using the LZMA algorithm. | |
</summary> | |
</member> | |
<member name="F:Microsoft.Deployment.Compression.Zip.ZipCompressionMethod.Ppmd"> | |
<summary> | |
The file is compressed using the PPMd algorithm. | |
</summary> | |
</member> | |
<member name="T:Microsoft.Deployment.Compression.Zip.ZipException"> | |
<summary> | |
Exception class for zip operations. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipException.#ctor(System.String,System.Exception)"> | |
<summary> | |
Creates a new ZipException with a specified error message and a reference to the | |
inner exception that is the cause of this exception. | |
</summary> | |
<param name="message">The message that describes the error.</param> | |
<param name="innerException">The exception that is the cause of the current exception. If the | |
innerException parameter is not a null reference (Nothing in Visual Basic), the current exception | |
is raised in a catch block that handles the inner exception.</param> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipException.#ctor(System.String)"> | |
<summary> | |
Creates a new ZipException with a specified error message. | |
</summary> | |
<param name="message">The message that describes the error.</param> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipException.#ctor"> | |
<summary> | |
Creates a new ZipException. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)"> | |
<summary> | |
Initializes a new instance of the ZipException class with serialized data. | |
</summary> | |
<param name="info">The SerializationInfo that holds the serialized object data about the exception being thrown.</param> | |
<param name="context">The StreamingContext that contains contextual information about the source or destination.</param> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipException.GetObjectData(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)"> | |
<summary> | |
Sets the SerializationInfo with information about the exception. | |
</summary> | |
<param name="info">The SerializationInfo that holds the serialized object data about the exception being thrown.</param> | |
<param name="context">The StreamingContext that contains contextual information about the source or destination.</param> | |
</member> | |
<member name="T:Microsoft.Deployment.Compression.Zip.ZipEngine"> | |
<summary> | |
Engine capable of packing and unpacking archives in the zip format. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.RegisterCompressionStreamCreator(Microsoft.Deployment.Compression.Zip.ZipCompressionMethod,System.IO.Compression.CompressionMode,System.Converter{System.IO.Stream,System.IO.Stream})"> | |
<summary> | |
Registers a delegate that can create a warpper stream for | |
compressing or uncompressing the data of a source stream. | |
</summary> | |
<param name="compressionMethod">Compression method being registered.</param> | |
<param name="compressionMode">Indicates registration for ether | |
compress or decompress mode.</param> | |
<param name="creator">Delegate being registered.</param> | |
<remarks> | |
For compression, the delegate accepts a stream that writes to the archive | |
and returns a wrapper stream that compresses bytes as they are written. | |
For decompression, the delegate accepts a stream that reads from the archive | |
and returns a wrapper stream that decompresses bytes as they are read. | |
This wrapper stream model follows the design used by | |
System.IO.Compression.DeflateStream, and indeed that class is used | |
to implement the Deflate compression method by default. | |
<para>To unregister a delegate, call this method again and pass | |
null for the delegate parameter.</para> | |
</remarks> | |
<example> | |
When the ZipEngine class is initialized, the Deflate compression method | |
is automatically registered like this: | |
<code> | |
ZipEngine.RegisterCompressionStreamCreator( | |
ZipCompressionMethod.Deflate, | |
CompressionMode.Compress, | |
delegate(Stream stream) { | |
return new DeflateStream(stream, CompressionMode.Compress, true); | |
}); | |
ZipEngine.RegisterCompressionStreamCreator( | |
ZipCompressionMethod.Deflate, | |
CompressionMode.Decompress, | |
delegate(Stream stream) { | |
return new DeflateStream(stream, CompressionMode.Decompress, true); | |
}); | |
</code></example> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.#ctor"> | |
<summary> | |
Creates a new instance of the zip engine. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.IsArchive(System.IO.Stream)"> | |
<summary> | |
Checks whether a Stream begins with a header that indicates | |
it is a valid archive file. | |
</summary> | |
<param name="stream">Stream for reading the archive file.</param> | |
<returns>True if the stream is a valid zip archive | |
(with no offset); false otherwise.</returns> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.FindArchiveOffset(System.IO.Stream)"> | |
<summary> | |
Gets the offset of an archive that is positioned 0 or more bytes | |
from the start of the Stream. | |
</summary> | |
<param name="stream">A stream for reading the archive.</param> | |
<returns>The offset in bytes of the archive, | |
or -1 if no archive is found in the Stream.</returns> | |
<remarks>The archive must begin on a 4-byte boundary.</remarks> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.GetFileInfo(Microsoft.Deployment.Compression.IUnpackStreamContext,System.Predicate{System.String})"> | |
<summary> | |
Gets information about files in a zip archive or archive chain. | |
</summary> | |
<param name="streamContext">A context interface to handle opening | |
and closing of archive and file streams.</param> | |
<param name="fileFilter">A predicate that can determine | |
which files to process, optional.</param> | |
<returns>Information about files in the archive stream.</returns> | |
<exception cref="T:Microsoft.Deployment.Compression.ArchiveException">The archive provided | |
by the stream context is not valid.</exception> | |
<remarks> | |
The <paramref name="fileFilter"/> predicate takes an internal file | |
path and returns true to include the file or false to exclude it. | |
</remarks> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.GetCentralDirectory(Microsoft.Deployment.Compression.IUnpackStreamContext)"> | |
<summary> | |
Reads all the file headers from the central directory in the main archive. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.GetEOCD(Microsoft.Deployment.Compression.IUnpackStreamContext,System.IO.Stream)"> | |
<summary> | |
Locates and reads the end of central directory record near the | |
end of the archive. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.Pack(Microsoft.Deployment.Compression.IPackStreamContext,System.Collections.Generic.IEnumerable{System.String},System.Int64)"> | |
<summary> | |
Creates a zip archive or chain of zip archives. | |
</summary> | |
<param name="streamContext">A context interface to handle opening | |
and closing of archive and file streams.</param> | |
<param name="files">An array of file lists. Each list is | |
compressed into one stream in the archive.</param> | |
<param name="maxArchiveSize">The maximum number of bytes for one archive | |
before the contents are chained to the next archive, or zero for unlimited | |
archive size.</param> | |
<exception cref="T:Microsoft.Deployment.Compression.ArchiveException">The archive could not be | |
created.</exception> | |
<remarks> | |
The stream context implementation may provide a mapping from the file | |
paths within the archive to the external file paths. | |
</remarks> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.CheckArchiveWriteStream(Microsoft.Deployment.Compression.IPackStreamContext,System.Int64,System.Int64,System.IO.Stream@)"> | |
<summary> | |
Moves to the next archive in the sequence if necessary. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.PackOneFile(Microsoft.Deployment.Compression.IPackStreamContext,System.String,System.Int64,System.Boolean,System.IO.Stream@)"> | |
<summary> | |
Adds one file to a zip archive in the process of being created. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.PackFileBytes(Microsoft.Deployment.Compression.IPackStreamContext,System.IO.Stream,System.Int64,System.Converter{System.IO.Stream,System.IO.Stream},System.IO.Stream@,System.UInt32@)"> | |
<summary> | |
Writes compressed bytes of one file to the archive, | |
keeping track of the CRC and number of bytes written. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.Unpack(Microsoft.Deployment.Compression.IUnpackStreamContext,System.Predicate{System.String})"> | |
<summary> | |
Extracts files from a zip archive or archive chain. | |
</summary> | |
<param name="streamContext">A context interface to handle opening | |
and closing of archive and file streams.</param> | |
<param name="fileFilter">An optional predicate that can determine | |
which files to process.</param> | |
<exception cref="T:Microsoft.Deployment.Compression.ArchiveException">The archive provided | |
by the stream context is not valid.</exception> | |
<remarks> | |
The <paramref name="fileFilter"/> predicate takes an internal file | |
path and returns true to include the file or false to exclude it. | |
</remarks> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.UnpackOneFile(Microsoft.Deployment.Compression.IUnpackStreamContext,Microsoft.Deployment.Compression.Zip.ZipFileHeader,System.IO.Stream@)"> | |
<summary> | |
Unpacks a single file from an archive or archive chain. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.AreFilePathsEqual(System.String,System.String)"> | |
<summary> | |
Compares two internal file paths while ignoring case and slash differences. | |
</summary> | |
<param name="path1">The first path to compare.</param> | |
<param name="path2">The second path to compare.</param> | |
<returns>True if the paths are equivalent.</returns> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipEngine.UnpackFileBytes(Microsoft.Deployment.Compression.IUnpackStreamContext,System.String,System.Int64,System.Int64,System.UInt32,System.IO.Stream,System.Converter{System.IO.Stream,System.IO.Stream},System.IO.Stream@)"> | |
<summary> | |
Decompresses bytes for one file from an archive or archive chain, | |
checking the crc at the end. | |
</summary> | |
</member> | |
<member name="P:Microsoft.Deployment.Compression.Zip.ZipEngine.ArchiveComment"> | |
<summary> | |
Gets the comment from the last-examined archive, | |
or sets the comment to be added to any created archives. | |
</summary> | |
</member> | |
<member name="T:Microsoft.Deployment.Compression.Zip.ZipFileInfo"> | |
<summary> | |
Object representing a compressed file within a zip package; provides operations for getting | |
the file properties and extracting the file. | |
</summary> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipFileInfo.#ctor(Microsoft.Deployment.Compression.Zip.ZipInfo,System.String)"> | |
<summary> | |
Creates a new ZipFileInfo object representing a file within a zip in a specified path. | |
</summary> | |
<param name="zipInfo">An object representing the zip archive containing the file.</param> | |
<param name="filePath">The path to the file within the zip archive. Usually, this is a simple file | |
name, but if the zip archive contains a directory structure this may include the directory.</param> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipFileInfo.#ctor(System.String,System.Int32,System.IO.FileAttributes,System.DateTime,System.Int64,System.Int64,Microsoft.Deployment.Compression.Zip.ZipCompressionMethod)"> | |
<summary> | |
Creates a new ZipFileInfo object with all parameters specified, | |
used internally when reading the metadata out of a zip archive. | |
</summary> | |
<param name="filePath">The internal path and name of the file in the zip archive.</param> | |
<param name="zipNumber">The zip archive number where the file starts.</param> | |
<param name="attributes">The stored attributes of the file.</param> | |
<param name="lastWriteTime">The stored last write time of the file.</param> | |
<param name="length">The uncompressed size of the file.</param> | |
<param name="compressedLength">The compressed size of the file.</param> | |
<param name="compressionMethod">Compression algorithm used for this file.</param> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipFileInfo.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)"> | |
<summary> | |
Initializes a new instance of the ZipFileInfo class with serialized data. | |
</summary> | |
<param name="info">The SerializationInfo that holds the serialized object data about the exception being thrown.</param> | |
<param name="context">The StreamingContext that contains contextual information about the source or destination.</param> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipFileInfo.GetObjectData(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)"> | |
<summary> | |
Sets the SerializationInfo with information about the archive. | |
</summary> | |
<param name="info">The SerializationInfo that holds the serialized object data.</param> | |
<param name="context">The StreamingContext that contains contextual information | |
about the source or destination.</param> | |
</member> | |
<member name="P:Microsoft.Deployment.Compression.Zip.ZipFileInfo.CompressedLength"> | |
<summary> | |
Gets the compressed size of the file in bytes. | |
</summary> | |
</member> | |
<member name="P:Microsoft.Deployment.Compression.Zip.ZipFileInfo.CompressionMethod"> | |
<summary> | |
Gets the method used to compress this file. | |
</summary> | |
</member> | |
<member name="T:Microsoft.Deployment.Compression.Zip.ZipInfo"> | |
<summary> | |
Object representing a zip file on disk; provides access to | |
file-based operations on the zip file. | |
</summary> | |
<remarks> | |
Generally, the methods on this class are much easier to use than the | |
stream-based interfaces provided by the <see cref="T:Microsoft.Deployment.Compression.Zip.ZipEngine"/> class. | |
</remarks> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipInfo.#ctor(System.String)"> | |
<summary> | |
Creates a new CabinetInfo object representing a zip file in a specified path. | |
</summary> | |
<param name="path">The path to the zip file. When creating a zip file, this file does not | |
necessarily exist yet.</param> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipInfo.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)"> | |
<summary> | |
Initializes a new instance of the CabinetInfo class with serialized data. | |
</summary> | |
<param name="info">The SerializationInfo that holds the serialized object data about the exception being thrown.</param> | |
<param name="context">The StreamingContext that contains contextual information about the source or destination.</param> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipInfo.CreateCompressionEngine"> | |
<summary> | |
Creates a compression engine that does the low-level work for | |
this object. | |
</summary> | |
<returns>A new <see cref="T:Microsoft.Deployment.Compression.Zip.ZipEngine"/> instance.</returns> | |
<remarks> | |
Each instance will be <see cref="M:Microsoft.Deployment.Compression.CompressionEngine.Dispose"/>d | |
immediately after use. | |
</remarks> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipInfo.GetFiles"> | |
<summary> | |
Gets information about the files contained in the archive. | |
</summary> | |
<returns>A list of <see cref="T:Microsoft.Deployment.Compression.Zip.ZipFileInfo"/> objects, each | |
containing information about a file in the archive.</returns> | |
</member> | |
<member name="M:Microsoft.Deployment.Compression.Zip.ZipInfo.GetFiles(System.String)"> | |
<summary> | |
Gets information about the certain files contained in the archive file. | |
</summary> | |
<param name="searchPattern">The search string, such as | |
"*.txt".</param> | |
<returns>A list of <see cref="T:Microsoft.Deployment.Compression.Zip.ZipFileInfo"/> objects, each containing | |
information about a file in the archive.</returns> | |
</member> | |
<member name="T:Microsoft.Tools.WindowsInstallerXml.WixDistribution"> | |
<summary> | |
Distribution specific strings. | |
</summary> | |
</member> | |
<member name="F:Microsoft.Tools.WindowsInstallerXml.WixDistribution.NewsUrl"> | |
<summary> | |
News URL for the distribution. | |
</summary> | |
</member> | |
<member name="F:Microsoft.Tools.WindowsInstallerXml.WixDistribution.ShortProduct"> | |
<summary> | |
Short product name for the distribution. | |
</summary> | |
</member> | |
<member name="F:Microsoft.Tools.WindowsInstallerXml.WixDistribution.SupportUrl"> | |
<summary> | |
Support URL for the distribution. | |
</summary> | |
</member> | |
<member name="F:Microsoft.Tools.WindowsInstallerXml.WixDistribution.TelemetryUrlFormat"> | |
<summary> | |
Telemetry URL format for the distribution. | |
</summary> | |
</member> | |
</members> | |
</doc> |