<?xml version="1.0" encoding="utf-8"?>
<!--
  <copyright file="wix200x.targets" company="Outercurve Foundation">
    Copyright (c) 2004, Outercurve Foundation.
    This software is released under Microsoft Reciprocal License (MS-RL).
    The license and further copyright text can be found in the file
    LICENSE.TXT at the root directory of the distribution.
  </copyright>
-->
<!--
  <remarks>
    WARNING:  DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have
              created a backup copy.  Incorrect changes to this file will make it
              impossible to load or build your projects from the command-line or the IDE.

    This file defines the steps in the standard build process for WiX projects (.wixproj).

    Conventions:
      * Targets and properties that start with an underscore (_) are considered private and should not
        be used outside of this file.

    Coding Conventions:
      * Two-space indentation of nested elements

      * Self-closing elements should have a space before the /> ("<MyProperty />")

      * Conditions should have a space before and after the "" and between any operators. For example:
        <MyProperty Condition=" '$(MyProperty)' == '' ">Value</MyProperty>

      * Targets should have each attribute on a single line and indented by two spaces. Also, there
        should be a blank line between the Target and the beginning of the contents (a blank line is
        optional before the closing </Target> tag).
        For example:
        <Target
          Name="MyTarget"
          DependsOnTargets="$(MyTargetDependsOn)">

          <Message Importance="low" Text="MyTarget is doing something." />
        </Target>
  </remarks>
-->
<Project
  xmlns="http://schemas.microsoft.com/developer/msbuild/2003"
  DefaultTargets="Build"
  InitialTargets="_CheckRequiredProperties;
                  _SetDefaultPathValues">

  <!--
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  Extension Points
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  -->

  <!-- Allow a user-customized targets files to be used as part of the build. -->
  <PropertyGroup>
    <UserTargetsPath>$(MSBuildProjectFullPath).user</UserTargetsPath>
  </PropertyGroup>
  <Import Project="$(UserTargetsPath)" Condition="Exists('$(UserTargetsPath)')" />
  <Import Project="$(CustomBeforeWixTargets)" Condition=" '$(CustomBeforeWixTargets)' != '' and Exists('$(CustomBeforeWixTargets)')" />

  <!-- These properties can be overridden to support non-default installations. -->
  <PropertyGroup>
    <WixTargetsPath Condition=" '$(WixTargetsPath)' == '' AND '$(MSBuildExtensionsPath32)' != '' ">$(MSBuildExtensionsPath32)\Microsoft\WiX\v3.x\Wix.targets</WixTargetsPath>
    <WixTasksPath Condition=" '$(WixTasksPath)' == '' AND '$(MSBuildExtensionsPath32)' != '' ">$(MSBuildExtensionsPath32)\..\WiX Toolset v3.8\bin\WixTasks.dll</WixTasksPath>
    <WixTargetsPath Condition=" '$(WixTargetsPath)' == '' ">$(MSBuildExtensionsPath)\Microsoft\WiX\v3.x\Wix.targets</WixTargetsPath>
    <WixTasksPath Condition=" '$(WixTasksPath)' == '' ">$(MSBuildExtensionsPath)\..\WiX Toolset v3.8\bin\WixTasks.dll</WixTasksPath>
    <LuxTargetsPath Condition=" '$(LuxTargetsPath)' == '' AND '$(MSBuildExtensionsPath32)' != '' ">$(MSBuildExtensionsPath32)\Microsoft\WiX\v3.x\Lux.targets</LuxTargetsPath>
    <LuxTasksPath Condition=" '$(LuxTasksPath)' == '' AND '$(MSBuildExtensionsPath32)' != '' ">$(MSBuildExtensionsPath32)\..\WiX Toolset v3.8\bin\LuxTasks.dll</LuxTasksPath>
    <LuxTargetsPath Condition=" '$(LuxTargetsPath)' == '' ">$(MSBuildExtensionsPath)\Microsoft\WiX\v3.x\Lux.targets</LuxTargetsPath>
    <LuxTasksPath Condition=" '$(LuxTasksPath)' == '' ">$(MSBuildExtensionsPath)\..\WiX Toolset v3.8\bin\LuxTasks.dll</LuxTasksPath>
  </PropertyGroup>

  <!-- This makes the project files a dependency of all targets so that things rebuild if they change -->
  <PropertyGroup> 
    <MSBuildAllProjects Condition="Exists('$(MSBuildProjectFullPath)')">$(MSBuildAllProjects);$(MSBuildProjectFullPath)</MSBuildAllProjects>
    <MSBuildAllProjects Condition="Exists('$(WixTargetsPath)')">$(MSBuildAllProjects);$(WixTargetsPath)</MSBuildAllProjects>
    <MSBuildAllProjects Condition="Exists('$(LuxTargetsPath)')">$(MSBuildAllProjects);$(LuxTargetsPath)</MSBuildAllProjects>
    <MSBuildAllProjects Condition="Exists('$(UserTargetsPath)')">$(MSBuildAllProjects);$(UserTargetsPath)</MSBuildAllProjects>
    <MSBuildAllProjects Condition="Exists('$(CustomBeforeWixTargets)')">$(MSBuildAllProjects);$(CustomBeforeWixTargets)</MSBuildAllProjects>
    <MSBuildAllProjects Condition="Exists('$(CustomAfterWixTargets)')">$(MSBuildAllProjects);$(CustomAfterWixTargets)</MSBuildAllProjects>
  </PropertyGroup>

  <!--
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  Property Declarations
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  -->

  <!-- These tasks can be used as general-purpose build tasks. -->
  <UsingTask TaskName="Candle" AssemblyFile="$(WixTasksPath)" />
  <UsingTask TaskName="Insignia" AssemblyFile="$(WixTasksPath)" />
  <UsingTask TaskName="Lit" AssemblyFile="$(WixTasksPath)" />
  <UsingTask TaskName="Light" AssemblyFile="$(WixTasksPath)" />
  <UsingTask TaskName="Torch" AssemblyFile="$(WixTasksPath)" />
  <UsingTask TaskName="ReadRegistry" AssemblyFile="$(WixTasksPath)" />

  <!-- These tasks are extensions for harvesting WiX source code from other sources. -->
  <UsingTask TaskName="HeatFile" AssemblyFile="$(WixTasksPath)" />
  <UsingTask TaskName="HeatDirectory" AssemblyFile="$(WixTasksPath)" />
  <UsingTask TaskName="HeatProject" AssemblyFile="$(WixTasksPath)" />

  <!-- These tasks are specific to the build process defined in this file, and are not considered general-purpose build tasks. -->
  <UsingTask TaskName="AssignProjectConfiguration" AssemblyName="Microsoft.Build.Tasks, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" Condition=" '$(MSBuildToolsVersion)' == '' or '$(MSBuildToolsVersion)' == '2.0' " />
  <UsingTask TaskName="AssignTargetPath" AssemblyName="Microsoft.Build.Tasks, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" Condition=" '$(MSBuildToolsVersion)' == '' or '$(MSBuildToolsVersion)' == '2.0' " />
  <UsingTask TaskName="ResolveNonMSBuildProjectOutput" AssemblyName="Microsoft.Build.Tasks, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" Condition=" '$(MSBuildToolsVersion)' == '' or '$(MSBuildToolsVersion)' == '2.0' " />
  <UsingTask TaskName="ResolveVCProjectOutput" AssemblyName="Microsoft.Build.Tasks, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" Condition=" '$(MSBuildToolsVersion)' == '' or '$(MSBuildToolsVersion)' == '2.0' " />

  <UsingTask TaskName="AssignProjectConfiguration" AssemblyName="Microsoft.Build.Tasks.v3.5, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" Condition=" '$(MSBuildToolsVersion)' == '3.5' " />
  <UsingTask TaskName="AssignTargetPath" AssemblyName="Microsoft.Build.Tasks.v3.5, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" Condition=" '$(MSBuildToolsVersion)' == '3.5' " />
  <UsingTask TaskName="ResolveNonMSBuildProjectOutput" AssemblyName="Microsoft.Build.Tasks.v3.5, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" Condition=" '$(MSBuildToolsVersion)' == '3.5' " />
  <UsingTask TaskName="ResolveVCProjectOutput" AssemblyName="Microsoft.Build.Tasks.v3.5, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" Condition=" '$(MSBuildToolsVersion)' == '3.5' " />

  <UsingTask TaskName="CreateItemAvoidingInference" AssemblyFile="$(WixTasksPath)" />
  <UsingTask TaskName="CreateProjectReferenceDefineConstants" AssemblyFile="$(WixTasksPath)" />
  <UsingTask TaskName="WixAssignCulture" AssemblyFile="$(WixTasksPath)" />
  <UsingTask TaskName="ResolveWixReferences" AssemblyFile="$(WixTasksPath)"/>
  <UsingTask TaskName="ReplaceString" AssemblyFile="$(WixTasksPath)"/>
  <UsingTask TaskName="GetCabList" AssemblyFile="$(WixTasksPath)" />
  <UsingTask TaskName="GetLooseFileList" AssemblyFile="$(WixTasksPath)" />
  <UsingTask TaskName="RefreshGeneratedFile" AssemblyFile="$(WixTasksPath)"/>
  <UsingTask TaskName="RefreshBundleGeneratedFile" AssemblyFile="$(WixTasksPath)"/>
  <UsingTask TaskName="GenerateCompileWithObjectPath" AssemblyFile="$(WixTasksPath)"/>

  <!-- WiX tools are 32bit EXEs, so run them out-of-proc when MSBuild is not 32bit. -->
  <PropertyGroup>
    <RunWixToolsOutOfProc Condition=" '$(PROCESSOR_ARCHITECTURE)'!='x86' ">true</RunWixToolsOutOfProc>
  </PropertyGroup>

  <!--
  Several properties must be set in the main project file, before using this .targets file.
  However, if the properties are not set, we pick some defaults.
  -->
  <PropertyGroup>
    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
    <Platform Condition=" '$(Platform)'=='' ">AnyCPU</Platform>
    <OutputPath Condition=" '$(OutputPath)' == '' ">bin\$(Configuration)\</OutputPath>
    <!-- Ensure any OutputPath has a trailing slash, so it can be concatenated -->
    <OutputPath Condition=" '$(OutputPath)' != '' and !HasTrailingSlash('$(OutputPath)') ">$(OutputPath)\</OutputPath>
    <_OriginalOutputType>$(OutputType)</_OriginalOutputType>
    <OutputType Condition=" '$(OutputType)' == '' ">Package</OutputType>
    <BuildProjectReferences Condition="'$(BuildProjectReferences)' == ''">true</BuildProjectReferences>
  </PropertyGroup>

  <!-- Properties for the intermediate object output -->
  <PropertyGroup>
    <BaseIntermediateOutputPath Condition=" '$(BaseIntermediateOutputPath)' == '' ">obj\</BaseIntermediateOutputPath>
    <IntermediateOutputPath Condition=" '$(IntermediateOutputPath)' != '' and !HasTrailingSlash('$(IntermediateOutputPath)') ">$(IntermediateOutputPath)\</IntermediateOutputPath>
    <IntermediateOutputPath Condition=" '$(IntermediateOutputPath)' == '' and '$(Platform)' == 'AnyCPU' ">$(BaseIntermediateOutputPath)$(Configuration)\</IntermediateOutputPath>
    <IntermediateOutputPath Condition=" '$(IntermediateOutputPath)' == '' and '$(Platform)' != 'AnyCPU' ">$(BaseIntermediateOutputPath)$(Platform)\$(Configuration)\</IntermediateOutputPath>
    <IntermediateExt Condition=" '$(IntermediateExt)' == '' ">.wixobj</IntermediateExt>
    <CabinetCachePath Condition=" '$(CabinetCachePath)'=='' and '$(ReuseCabinetCache)'=='true' ">$(IntermediateOutputPath)cabcache\</CabinetCachePath>
    <CleanFile Condition=" '$(CleanFile)' == '' ">$(MSBuildProjectFile).FileList.txt</CleanFile>
    <BindContentsFilePrefix Condition=" '$(BindContentsFilePrefix)' == '' ">$(MSBuildProjectFile).BindContentsFileList</BindContentsFilePrefix>
    <BindContentsFileExtension Condition=" '$(BindContentsFileExtension)' == '' ">.txt</BindContentsFileExtension>
    <BindOutputsFilePrefix Condition=" '$(BindOutputsFilePrefix)' == '' ">$(MSBuildProjectFile).BindOutputsFileList</BindOutputsFilePrefix>
    <BindOutputsFileExtension Condition=" '$(BindOutputsFileExtension)' == '' ">.txt</BindOutputsFileExtension>
    <BindBuiltOutputsFilePrefix Condition=" '$(BindBuiltOutputsFilePrefix)' == '' ">$(MSBuildProjectFile).BindBuiltOutputsFileList</BindBuiltOutputsFilePrefix>
    <BindBuiltOutputsFileExtension Condition=" '$(BindBuiltOutputsFileExtension)' == '' ">.txt</BindBuiltOutputsFileExtension>
    <SignedFile Condition=" '$(SignedFile)' == '' ">$(MSBuildProjectFile).Signed.txt</SignedFile>
  </PropertyGroup>

  <!--
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  IDE Macro Property Declarations
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  -->

  <!--
  IDE Macros available from both integrated builds and from command line builds.
  The following properties are 'macros' that are available via IDE for pre and post build steps.
  All of them should be added to WixBuildMacroCollection to ensure that they are shown in the UI.
  -->
  <PropertyGroup>
    <TargetExt Condition=" '$(OutputType)' == 'Package' ">.msi</TargetExt>
    <TargetExt Condition=" '$(OutputType)' == 'Module' ">.msm</TargetExt>
    <TargetExt Condition=" '$(OutputType)' == 'PatchCreation' ">.pcp</TargetExt>
    <TargetExt Condition=" '$(OutputType)' == 'Library' ">.wixlib</TargetExt>
    <TargetExt Condition=" '$(OutputType)' == 'Bundle' ">.exe</TargetExt>
  </PropertyGroup>

  <PropertyGroup>
    <!-- Example, bin\Debug\ -->
    <OutDir Condition=" '$(OutDir)' == '' ">$(OutputPath)</OutDir>
    <!-- Ensure OutDir has a trailing slash, so it can be concatenated -->
    <OutDir Condition=" '$(OutDir)' != '' and !HasTrailingSlash('$(OutDir)') ">$(OutDir)\</OutDir>

    <!-- Default pdb output path to the output directory -->
    <PdbOutputPath Condition=" '$(PdbOutputPath)'=='' ">$(OutDir)</PdbOutputPath>
    <PdbOutputPath Condition=" '$(PdbOutputPath)' != '' and !HasTrailingSlash('$(PdbOutputPath)') ">$(PdbOutputPath)\</PdbOutputPath>

    <!-- Example, MySetup -->
    <ProjectName Condition=" '$(ProjectName)' == '' ">$(MSBuildProjectName)</ProjectName>

    <!-- Example, MySetup.wixproj -->
    <ProjectFileName Condition=" '$(ProjectFileName)' == '' ">$(MSBuildProjectFile)</ProjectFileName>

    <!-- Example, .wixproj -->
    <ProjectExt Condition=" '$(ProjectExt)' == '' ">$(MSBuildProjectExtension)</ProjectExt>

    <!-- Example, c:\MyProjects\MySetup\ -->
    <ProjectDir Condition=" '$(ProjectDir)' == '' ">$(MSBuildProjectDirectory)\</ProjectDir>

    <!-- Example, c:\MyProjects\MySetup\MySetup.msi -->
    <ProjectPath Condition=" '$(ProjectPath)' == '' ">$(ProjectDir)$(ProjectFileName)</ProjectPath>

    <!-- Example, .wixpdb -->
    <TargetPdbExt Condition=" '$(TargetPdbExt)' == '' ">.wixpdb</TargetPdbExt>

    <!-- Example, MySetup -->
    <TargetName Condition=" '$(TargetName)' == '' ">$(OutputName)</TargetName>

    <!-- Example, MySetup.msi -->
    <TargetFileName Condition=" '$(TargetFileName)' == '' ">$(TargetName)$(TargetExt)</TargetFileName>

    <!-- Example, MySetup.wixpdb" -->
    <TargetPdbName Condition=" '$(TargetPdbName)' == '' ">$(TargetName)$(TargetPdbExt)</TargetPdbName>

    <!-- Example, Debug -->
    <ConfigurationName Condition=" '$(ConfigurationName)' == '' ">$(Configuration)</ConfigurationName>

    <!-- Example, AnyCPU -->
    <PlatformName Condition=" '$(PlatformName)' == '' ">$(Platform)</PlatformName>
  </PropertyGroup>

  <ItemGroup>
    <!-- Create the output path as an item so that we can use %(FullPath) on it. -->
    <_OutputPathItem Include="$(OutDir)" />
    <_IntermediateOutputPathItem Include="$(IntermediateOutputPath)" />
    <_PdbOutputPathItem Include="$(PdbOutputPath)" />
  </ItemGroup>

  <PropertyGroup>
    <!-- Example, c:\MyProjects\MySetup\bin\debug\ -->
    <!--
    Condition intentionally omitted on this one, because it causes problems
    when we pick up the value of an environment variable named TargetDir
    -->
    <TargetDir>@(_OutputPathItem->'%(FullPath)')</TargetDir>
    <TargetPdbDir>@(_PdbOutputPathItem->'%(FullPath)')</TargetPdbDir>

    <!-- Example, C:\MyProjects\MySetup\bin\debug\MySetup.msi -->
    <TargetPath Condition=" '$(TargetPath)' == '' ">@(_OutputPathItem->'%(FullPath)$(TargetFileName)')</TargetPath>
    <TargetPdbPath Condition=" '$(TargetPdbPath)' == '' ">@(_PdbOutputPathItem->'%(FullPath)$(TargetPdbName)')</TargetPdbPath>
  </PropertyGroup>

  <!--
  Set the SignTargetPath item directly when output is a Bundle. The AssignCultures target
  sets SignTargetPath item for other output types based on the cultures provided.
  -->
  <ItemGroup>
    <SignTargetPath Include="$(TargetPath)" Condition=" '$(OutputType)' == 'Bundle' AND '$(SignOutput)' == 'true' AND '$(SuppressLayout)' != 'true' " />
  </ItemGroup>

  <!--
  IDE Macros available only from integrated builds. The following properties are 'macros' that are
  available via IDE for pre and post build steps. However, they are not defined when directly
  building a project from the command line, only when building a solution.
  -->
  <PropertyGroup>
    <DevEnvDir Condition=" '$(DevEnvDir)' == '' ">*Undefined if not building from within Visual Studio*</DevEnvDir>

    <!-- Example, MySolution -->
    <SolutionName Condition=" '$(SolutionName)' == '' ">*Undefined if not building a solution or within Visual Studio*</SolutionName>

    <!-- Example, MySolution.sln -->
    <SolutionFileName Condition=" '$(SolutionFileName)' == '' ">*Undefined if not building a solution or within Visual Studio*</SolutionFileName>

    <!-- Example, C:\MySolutions\MySolution\MySolution.sln -->
    <SolutionPath Condition=" '$(SolutionPath)' == '' ">*Undefined if not building a solution or within Visual Studio*</SolutionPath>

    <!-- Example, C:\MySolutions\MySolution\ -->
    <SolutionDir Condition=" '$(SolutionDir)' == '' ">*Undefined if not building a solution or within Visual Studio*</SolutionDir>

    <!-- Example, .sln -->
    <SolutionExt Condition=" '$(SolutionExt)' == '' ">*Undefined if not building a solution or within Visual Studio*</SolutionExt>
  </PropertyGroup>

  <!--
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  Default Harvester, Compiler, Linker, and Librarian Property Declarations
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  -->

  <!-- If WixExtension was passed in via the command line, then convert it to an ItemGroup -->
  <ItemGroup>
    <WixExtension Include="$(WixExtension)"  Condition=" '$(WixExtension)' != '' " />
  </ItemGroup>

  <!-- Default Harvester properties-->
  <PropertyGroup>
    <HarvestNoLogo Condition=" '$(HarvestNoLogo)' == '' ">$(NoLogo)</HarvestNoLogo>
    <HarvestSuppressAllWarnings Condition=" '$(HarvestSuppressAllWarnings)' == '' ">$(SuppressAllWarnings)</HarvestSuppressAllWarnings>
    <HarvestSuppressSpecificWarnings Condition=" '$(HarvestSuppressSpecificWarnings)' == '' ">$(SuppressSpecificWarnings)</HarvestSuppressSpecificWarnings>
    <HarvestTreatWarningsAsErrors Condition=" '$(HarvestTreatWarningsAsErrors)' == '' ">$(TreatWarningsAsErrors)</HarvestTreatWarningsAsErrors>
    <HarvestTreatSpecificWarningsAsErrors Condition=" '$(HarvestTreatSpecificWarningsAsErrors)' == '' ">$(TreatSpecificWarningsAsErrors)</HarvestTreatSpecificWarningsAsErrors>
    <HarvestVerboseOutput Condition=" '$(HarvestVerboseOutput)' == '' ">$(VerboseOutput)</HarvestVerboseOutput>
    <HarvestAutogenerateGuids Condition=" '$(HarvestAutogenerateGuids)' == '' ">true</HarvestAutogenerateGuids>
    <HarvestGenerateGuidsNow Condition=" '$(HarvestGenerateGuidsNow)' == '' ">false</HarvestGenerateGuidsNow>
    <HarvestSuppressFragments Condition=" '$(HarvestSuppressFragments)' == '' ">true</HarvestSuppressFragments>
    <HarvestSuppressUniqueIds Condition=" '$(HarvestSuppressUniqueIds)' == '' ">false</HarvestSuppressUniqueIds>
  </PropertyGroup>

  <!-- Default HarvestProjects properties -->
  <PropertyGroup>
    <!-- Project harvesting is defaulted to off until it works more consistently. -->
    <EnableProjectHarvesting Condition=" '$(EnableProjectHarvesting)'=='' ">false</EnableProjectHarvesting>

    <HarvestProjectsNoLogo Condition=" '$(HarvestProjectsNoLogo)' == '' ">$(HarvestNoLogo)</HarvestProjectsNoLogo>
    <HarvestProjectsSuppressAllWarnings Condition=" '$(HarvestProjectsSuppressAllWarnings)' == '' ">$(HarvestSuppressAllWarnings)</HarvestProjectsSuppressAllWarnings>
    <HarvestProjectsSuppressSpecificWarnings Condition=" '$(HarvestProjectsSuppressSpecificWarnings)' == '' ">$(HarvestSuppressSpecificWarnings)</HarvestProjectsSuppressSpecificWarnings>
    <HarvestProjectsTreatWarningsAsErrors Condition=" '$(HarvestProjectsTreatWarningsAsErrors)' == '' ">$(HarvestTreatWarningsAsErrors)</HarvestProjectsTreatWarningsAsErrors>
    <HarvestProjectsTreatSpecificWarningsAsErrors Condition=" '$(HarvestProjectsTreatSpecificWarningsAsErrors)' == '' ">$(HarvestTreatSpecificWarningsAsErrors)</HarvestProjectsTreatSpecificWarningsAsErrors>
    <HarvestProjectsVerboseOutput Condition=" '$(HarvestProjectsVerboseOutput)' == '' ">$(HarvestVerboseOutput)</HarvestProjectsVerboseOutput>
    <HarvestProjectsAutogenerateGuids Condition=" '$(HarvestProjectsAutogenerateGuids)' == '' ">$(HarvestAutogenerateGuids)</HarvestProjectsAutogenerateGuids>
    <HarvestProjectsGenerateGuidsNow Condition=" '$(HarvestProjectsGenerateGuidsNow)' == '' ">$(HarvestGenerateGuidsNow)</HarvestProjectsGenerateGuidsNow>
    <HarvestProjectsSuppressFragments Condition=" '$(HarvestProjectsSuppressFragments)' == '' ">$(HarvestSuppressFragments)</HarvestProjectsSuppressFragments>
    <HarvestProjectsSuppressUniqueIds Condition=" '$(HarvestProjectsSuppressUniqueIds)' == '' ">$(HarvestSuppressUniqueIds)</HarvestProjectsSuppressUniqueIds>
    <HarvestProjectsTransforms Condition=" '$(HarvestProjectsTransforms)' == '' ">$(HarvestTransforms)</HarvestProjectsTransforms>
    <HarvestProjectsGeneratedFile Condition=" '$(HarvestProjectsGeneratedFile)' == '' and '$(OutputType)' != 'Bundle' ">$(IntermediateOutputPath)Product.Generated.wxs</HarvestProjectsGeneratedFile>
    <HarvestProjectsGeneratedFile Condition=" '$(HarvestProjectsGeneratedFile)' == '' and '$(OutputType)' == 'Bundle' ">$(IntermediateOutputPath)Bundle.Generated.wxs</HarvestProjectsGeneratedFile>
  </PropertyGroup>

  <!-- Default HarvestDirectory properties -->
  <PropertyGroup>
    <HarvestDirectoryNoLogo Condition=" '$(HarvestDirectoryNoLogo)' == '' ">$(HarvestNoLogo)</HarvestDirectoryNoLogo>
    <HarvestDirectorySuppressAllWarnings Condition=" '$(HarvestDirectorySuppressAllWarnings)' == '' ">$(HarvestSuppressAllWarnings)</HarvestDirectorySuppressAllWarnings>
    <HarvestDirectorySuppressSpecificWarnings Condition=" '$(HarvestDirectorySuppressSpecificWarnings)' == '' ">$(HarvestSuppressSpecificWarnings)</HarvestDirectorySuppressSpecificWarnings>
    <HarvestDirectoryTreatWarningsAsErrors Condition=" '$(HarvestDirectoryTreatWarningsAsErrors)' == '' ">$(HarvestTreatWarningsAsErrors)</HarvestDirectoryTreatWarningsAsErrors>
    <HarvestDirectoryTreatSpecificWarningsAsErrors Condition=" '$(HarvestDirectoryTreatSpecificWarningsAsErrors)' == '' ">$(HarvestTreatSpecificWarningsAsErrors)</HarvestDirectoryTreatSpecificWarningsAsErrors>
    <HarvestDirectoryVerboseOutput Condition=" '$(HarvestDirectoryVerboseOutput)' == '' ">$(HarvestVerboseOutput)</HarvestDirectoryVerboseOutput>
    <HarvestDirectoryAutogenerateGuids Condition=" '$(HarvestDirectoryAutogenerateGuids)' == '' ">$(HarvestAutogenerateGuids)</HarvestDirectoryAutogenerateGuids>
    <HarvestDirectoryGenerateGuidsNow Condition=" '$(HarvestDirectoryGenerateGuidsNow)' == '' ">$(HarvestGenerateGuidsNow)</HarvestDirectoryGenerateGuidsNow>
    <HarvestDirectorySuppressFragments Condition=" '$(HarvestDirectorySuppressFragments)' == '' ">$(HarvestSuppressFragments)</HarvestDirectorySuppressFragments>
    <HarvestDirectorySuppressUniqueIds Condition=" '$(HarvestDirectorySuppressUniqueIds)' == '' ">$(HarvestSuppressUniqueIds)</HarvestDirectorySuppressUniqueIds>
    <HarvestDirectoryTransforms Condition=" '$(HarvestDirectoryTransforms)' == '' ">$(HarvestTransforms)</HarvestDirectoryTransforms>
  </PropertyGroup>

  <!-- Default HarvestFile properties -->
  <PropertyGroup>
    <HarvestFileNoLogo Condition=" '$(HarvestFileNoLogo)' == '' ">$(HarvestNoLogo)</HarvestFileNoLogo>
    <HarvestFileSuppressAllWarnings Condition=" '$(HarvestFileSuppressAllWarnings)' == '' ">$(HarvestSuppressAllWarnings)</HarvestFileSuppressAllWarnings>
    <HarvestFileSuppressSpecificWarnings Condition=" '$(HarvestFileSuppressSpecificWarnings)' == '' ">$(HarvestSuppressSpecificWarnings)</HarvestFileSuppressSpecificWarnings>
    <HarvestFileTreatWarningsAsErrors Condition=" '$(HarvestFileTreatWarningsAsErrors)' == '' ">$(HarvestTreatWarningsAsErrors)</HarvestFileTreatWarningsAsErrors>
    <HarvestFileTreatSpecificWarningsAsErrors Condition=" '$(HarvestFileTreatSpecificWarningsAsErrors)' == '' ">$(HarvestTreatSpecificWarningsAsErrors)</HarvestFileTreatSpecificWarningsAsErrors>
    <HarvestFileVerboseOutput Condition=" '$(HarvestFileVerboseOutput)' == '' ">$(HarvestVerboseOutput)</HarvestFileVerboseOutput>
    <HarvestFileAutogenerateGuids Condition=" '$(HarvestFileAutogenerateGuids)' == '' ">$(HarvestAutogenerateGuids)</HarvestFileAutogenerateGuids>
    <HarvestFileGenerateGuidsNow Condition=" '$(HarvestFileGenerateGuidsNow)' == '' ">$(HarvestGenerateGuidsNow)</HarvestFileGenerateGuidsNow>
    <HarvestFileSuppressFragments Condition=" '$(HarvestFileSuppressFragments)' == '' ">$(HarvestSuppressFragments)</HarvestFileSuppressFragments>
    <HarvestFileSuppressUniqueIds Condition=" '$(HarvestFileSuppressUniqueIds)' == '' ">$(HarvestSuppressUniqueIds)</HarvestFileSuppressUniqueIds>
    <HarvestFileTransforms Condition=" '$(HarvestFileTransforms)' == '' ">$(HarvestTransforms)</HarvestFileTransforms>
  </PropertyGroup>

  <!-- Defaut Compiler properties. -->
  <PropertyGroup>
    <CompilerNoLogo Condition=" '$(CompilerNoLogo)' == '' ">$(NoLogo)</CompilerNoLogo>
    <CompilerSuppressAllWarnings Condition=" '$(CompilerSuppressAllWarnings)' == '' ">$(SuppressAllWarnings)</CompilerSuppressAllWarnings>
    <CompilerSuppressSpecificWarnings Condition=" '$(CompilerSuppressSpecificWarnings)' == '' ">$(SuppressSpecificWarnings)</CompilerSuppressSpecificWarnings>
    <CompilerSuppressSchemaValidation Condition=" '$(CompilerSuppressSchemaValidation)' == '' ">$(SuppressSchemaValidation)</CompilerSuppressSchemaValidation>
    <CompilerTreatWarningsAsErrors Condition=" '$(CompilerTreatWarningsAsErrors)' == '' ">$(TreatWarningsAsErrors)</CompilerTreatWarningsAsErrors>
    <CompilerTreatSpecificWarningsAsErrors Condition=" '$(CompilerTreatSpecificWarningsAsErrors)' == '' ">$(TreatSpecificWarningsAsErrors)</CompilerTreatSpecificWarningsAsErrors>
    <CompilerVerboseOutput Condition=" '$(CompilerVerboseOutput)' == '' ">$(VerboseOutput)</CompilerVerboseOutput>
    <InstallerPlatform Condition=" '$(InstallerPlatform)' == '' and '$(Platform)' != 'AnyCPU' and '$(Platform)' != 'Any CPU' ">$(Platform)</InstallerPlatform>
  </PropertyGroup>
  
  <!-- Default Lib properties. -->
  <PropertyGroup>
    <LibNoLogo Condition=" '$(LibNoLogo)' == '' ">$(NoLogo)</LibNoLogo>
    <LibBindFiles Condition=" '$(LibBindFiles)' == '' ">$(BindFiles)</LibBindFiles>
    <LibPedantic Condition=" '$(LibPedantic)' == '' ">$(Pedantic)</LibPedantic>
    <LibSuppressAllWarnings Condition=" '$(LibSuppressAllWarnings)' == '' ">$(SuppressAllWarnings)</LibSuppressAllWarnings>
    <LibSuppressSpecificWarnings Condition=" '$(LibSuppressSpecificWarnings)' == '' ">$(SuppressSpecificWarnings)</LibSuppressSpecificWarnings>
    <LibSuppressSchemaValidation Condition=" '$(LibSuppressSchemaValidation)' == '' ">$(SuppressSchemaValidation)</LibSuppressSchemaValidation>
    <LibSuppressIntermediateFileVersionMatching Condition=" '$(LibSuppressIntermediateFileVersionMatching)' == '' ">$(SuppressIntermediateFileVersionMatching)</LibSuppressIntermediateFileVersionMatching>
    <LibTreatWarningsAsErrors Condition=" '$(LibTreatWarningsAsErrors)' == '' ">$(TreatWarningsAsErrors)</LibTreatWarningsAsErrors>
    <LibTreatSpecificWarningsAsErrors Condition=" '$(LibTreatSpecificWarningsAsErrors)' == '' ">$(TreatSpecificWarningsAsErrors)</LibTreatSpecificWarningsAsErrors>
    <LibVerboseOutput Condition=" '$(LibVerboseOutput)' == '' ">$(VerboseOutput)</LibVerboseOutput>
  </PropertyGroup>

  <!-- Default Linker properties. -->
  <PropertyGroup>
    <LinkerNoLogo Condition=" '$(LinkerNoLogo)' == '' ">$(NoLogo)</LinkerNoLogo>
    <LinkerBindFiles Condition=" '$(LinkerBindFiles)' == '' ">$(BindFiles)</LinkerBindFiles>
    <LinkerPedantic Condition=" '$(LinkerPedantic)' == '' ">$(Pedantic)</LinkerPedantic>
    <LinkerSuppressAllWarnings Condition=" '$(LinkerSuppressAllWarnings)' == '' ">$(SuppressAllWarnings)</LinkerSuppressAllWarnings>
    <LinkerSuppressSpecificWarnings Condition=" '$(LinkerSuppressSpecificWarnings)' == '' ">$(SuppressSpecificWarnings)</LinkerSuppressSpecificWarnings>
    <LinkerSuppressSchemaValidation Condition=" '$(LinkerSuppressSchemaValidation)' == '' ">$(SuppressSchemaValidation)</LinkerSuppressSchemaValidation>
    <LinkerSuppressIntermediateFileVersionMatching Condition=" '$(LinkerSuppressIntermediateFileVersionMatching)' == '' ">$(SuppressIntermediateFileVersionMatching)</LinkerSuppressIntermediateFileVersionMatching>
    <LinkerTreatWarningsAsErrors Condition=" '$(LinkerTreatWarningsAsErrors)' == '' ">$(TreatWarningsAsErrors)</LinkerTreatWarningsAsErrors>
    <LinkerTreatSpecificWarningsAsErrors Condition=" '$(LinkerTreatSpecificWarningsAsErrors)' == '' ">$(TreatSpecificWarningsAsErrors)</LinkerTreatSpecificWarningsAsErrors>
    <LinkerVerboseOutput Condition=" '$(LinkerVerboseOutput)' == '' ">$(VerboseOutput)</LinkerVerboseOutput>
  </PropertyGroup>

  <!-- If BindInputPaths (or LinkerBindInputPaths) was passed in via the command line, then convert it to an ItemGroup -->
  <ItemGroup>
    <BindInputPaths Include="$(BindInputPaths)"  Condition=" '$(BindInputPaths)' != '' " />
    <LinkerBindInputPaths Include="$(LinkerBindInputPaths)"  Condition=" '$(LinkerBindInputPaths)' != '' " />
  </ItemGroup>

  <!-- Default Lit and Light "properties" -->
  <ItemGroup>
    <LinkerBindInputPaths Condition=" '@(LinkerBindInputPaths)' == '' " Include="@(BindInputPaths)" />
    <LinkerBindInputPaths Condition=" '@(LinkerBindInputPaths)' == '' " Include="$(LinkerBaseInputPaths)" />
    <LinkerBindInputPaths Condition=" '@(LinkerBindInputPaths)' == '' " Include="$(BaseInputPaths)" />
  </ItemGroup>

  <!-- Default Inscribe properties. -->
  <PropertyGroup>
    <InscribeNoLogo Condition=" '$(InscribeNoLogo)' == '' ">$(NoLogo)</InscribeNoLogo>
    <InscribeSuppressAllWarnings Condition=" '$(InscribeSuppressAllWarnings)' == '' ">$(SuppressAllWarnings)</InscribeSuppressAllWarnings>
    <InscribeSuppressSpecificWarnings Condition=" '$(InscribeSuppressSpecificWarnings)' == '' ">$(SuppressSpecificWarnings)</InscribeSuppressSpecificWarnings>
    <InscribeTreatWarningsAsErrors Condition=" '$(InscribeTreatWarningsAsErrors)' == '' ">$(TreatWarningsAsErrors)</InscribeTreatWarningsAsErrors>
    <InscribeTreatSpecificWarningsAsErrors Condition=" '$(InscribeTreatSpecificWarningsAsErrors)' == '' ">$(TreatSpecificWarningsAsErrors)</InscribeTreatSpecificWarningsAsErrors>
    <InscribeVerboseOutput Condition=" '$(InscribeVerboseOutput)' == '' ">$(VerboseOutput)</InscribeVerboseOutput>
  </PropertyGroup>

  <!--
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  Initial Targets
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  -->

  <!--
  ==================================================================================================
  _CheckRequiredProperties

    Checks properties that must be set in the main project file or on the command line before
    using this .TARGETS file.

    [IN]
    $(OutputName) - The name of the MSI/MSM/wixlib to build (without the extension)
    $(OutputType) - Possible values are 'package', 'PatchCreation', 'module', 'library', 'bundle'
  ==================================================================================================
  -->
  <PropertyGroup>
    <_PleaseSetThisInProjectFile>Please set this in the project file before the &lt;Import&gt; of the wix.targets file.</_PleaseSetThisInProjectFile>
    <_OutputTypeDescription>The OutputType defines whether a Windows Installer package (.msi), PatchCreation (.pcp), merge module (.msm), wix library (.wixlib), or self-extracting executable (.exe) is being built. $(_PleaseSetThisInProjectFile) Possible values are 'Package', 'Module', 'Library', and 'Bundle'.</_OutputTypeDescription>
  </PropertyGroup>
  <Target Name="_CheckRequiredProperties">

    <Error
      Code="WIXTARGETS100"
      Condition=" '$(OutputName)' == '' "
      Text="The OutputName property is not set in project &quot;$(MSBuildProjectFile)&quot;. The OutputName defines the name of the output without a file extension. $(_PleaseSetThisInProjectFile)" />

    <Warning
      Code="WIXTARGETS101"
      Condition=" '$(_OriginalOutputType)' == '' "
      Text="The OutputType property is not set in project &quot;$(MSBuildProjectFile)&quot;. Defaulting to 'Package'. $(_OutputTypeDescription)" />

    <Error
      Code="WIXTARGETS102"
      Condition=" '$(OutputType)' != 'Package' and '$(OutputType)' != 'PatchCreation' and '$(OutputType)' != 'Module' and '$(OutputType)' != 'Library' and '$(OutputType)' != 'Bundle' "
      Text="The OutputType property '$(OutputType)' is not valid in project &quot;$(MSBuildProjectFile)&quot;. $(_OutputTypeDescription)" />

    <!-- Although we try to ensure a trailing slash, it's possible to circumvent this if the property is set on the command line -->
    <Error
      Code="WIXTARGETS103"
      Condition="'$(OutDir)' != '' and !HasTrailingSlash('$(OutDir)')"
      Text="The OutDir property must end with a trailing slash." />

    <Message
      Condition=" '$(BaseInputPaths)' != '' "
      Text="Deprecated: Use BindInputPaths instead of BaseInputPaths." />

    <Message
      Condition=" '$(LinkerBaseInputPaths)' != '' "
      Text="Deprecated: Use LinkerBindInputPaths instead of LinkerBaseInputPaths." />

  </Target>

  <!--
  ==================================================================================================
  _SetDefaultPathValues

    Gets the default values of some paths from the registry.

    [OUT]
    $(WixExtDir) - Default Wix Extension Directory
    $(WixToolPath) - Default Wix Tool install folder
  ==================================================================================================
  -->
  <PropertyGroup>
    <WixInstallRegKey>SOFTWARE\Microsoft\Windows Installer XML\3.8</WixInstallRegKey>
    <WixInstallRegKeyWow64>SOFTWARE\Wow6432Node\Microsoft\Windows Installer XML\3.8</WixInstallRegKeyWow64>
  </PropertyGroup>
  <Target
    Name="_SetDefaultPathValues">

    <ReadRegistry
      Hive="LocalMachine"
      Key="$(WixInstallRegKey)"
      Name="InstallRoot"
      FailIfMissing="false"
      Condition=" '$(WixExtDir)' == '' ">

      <Output TaskParameter="Value" PropertyName="WixExtDir" />
    </ReadRegistry>

    <ReadRegistry
      Hive="LocalMachine"
      Key="$(WixInstallRegKey)"
      Name="InstallRoot"
      FailIfMissing="false"
      Condition=" '$(WixToolPath)' == '' ">

      <Output TaskParameter="Value" PropertyName="WixToolPath" />
    </ReadRegistry>

    <ReadRegistry
      Hive="LocalMachine"
      Key="$(WixInstallRegKeyWow64)"
      Name="InstallRoot"
      FailIfMissing="false"
      Condition=" '$(WixExtDir)' == '' ">

      <Output TaskParameter="Value" PropertyName="WixExtDir" />
    </ReadRegistry>

    <ReadRegistry
      Hive="LocalMachine"
      Key="$(WixInstallRegKeyWow64)"
      Name="InstallRoot"
      FailIfMissing="false"
      Condition=" '$(WixToolPath)' == '' ">

      <Output TaskParameter="Value" PropertyName="WixToolPath" />
    </ReadRegistry>
    
    <CreateProperty Value="$(WixToolPath)" Condition=" '$(WixExtDir)' == '' ">
      <Output TaskParameter="Value" PropertyName="WixExtDir" />
    </CreateProperty>

  </Target>

  <!--
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  Build Targets
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  -->

  <!--
  ==================================================================================================
  Build

    The main build entry point.
  ==================================================================================================
  -->
  <PropertyGroup>
    <BuildDependsOn>
      BeforeBuild;
      CoreBuild;
      AfterBuild
    </BuildDependsOn>
  </PropertyGroup>
  <Target
    Name="Build"
    DependsOnTargets="$(BuildDependsOn)"
    Outputs="$(TargetPath)">
  </Target>

  <!--
  ==================================================================================================
  BeforeBuild

    Redefine this target in your project in order to run tasks just before Build.
  ==================================================================================================
  -->
  <Target Name="BeforeBuild" />

  <!--
  ==================================================================================================
  AfterBuild

    Redefine this target in your project in order to run tasks just after Build.
  ==================================================================================================
  -->
  <Target Name="AfterBuild" />

  <!--
  ==================================================================================================
  CoreBuild

    The core build step calls each of the build targets.
  ==================================================================================================
  -->
  <PropertyGroup>
    <CoreBuildDependsOn>
      BuildOnlySettings;
      PrepareForBuild;
      PreBuildEvent;
      ResolveReferences;
      AddCompilerDefineConstants;
      CompileAndLink;
      Signing;
      GetTargetPath;
      IncrementalClean;
      PostBuildEvent
    </CoreBuildDependsOn>
  </PropertyGroup>
  <Target
    Name="CoreBuild"
    DependsOnTargets="$(CoreBuildDependsOn)">

    <OnError
      ExecuteTargets="_TimeStampAfterCompileAndLink;PostBuildEvent"
      Condition=" '$(RunPostBuildEvent)' == 'Always' or '$(RunPostBuildEvent)' == 'OnOutputUpdated' " />

    <OnError ExecuteTargets="_CleanRecordFileWrites" />

  </Target>

  <!--
  ==================================================================================================
  Rebuild

    Delete all intermediate and final build outputs, and then build the project from scratch.
  ==================================================================================================
  -->
  <PropertyGroup>
    <RebuildDependsOn>
      BeforeRebuild;
      Clean;
      $(MSBuildProjectDefaultTargets);
      AfterRebuild;
    </RebuildDependsOn>

    <RebuildDependsOn Condition=" '$(MSBuildProjectDefaultTargets)' == 'Rebuild' ">
      BeforeRebuild;
      Clean;
      Build;
      AfterRebuild;
    </RebuildDependsOn>
  </PropertyGroup>

  <Target
    Name="Rebuild"
    DependsOnTargets="$(RebuildDependsOn)"
    Outputs="$(TargetPath)" />

  <!--
  ==================================================================================================
  BeforeRebuild

    Redefine this target in your project in order to run tasks just before Rebuild.
  ==================================================================================================
  -->
  <Target Name="BeforeRebuild" />

  <!--
  ==================================================================================================
  AfterRebuild

    Redefine this target in your project in order to run tasks just after Rebuild.
  ==================================================================================================
  -->
  <Target Name="AfterRebuild" />

  <!--
  ==================================================================================================
  BuildOnlySettings

    This target is called only when doing a real build. It is not called during project load.
  ==================================================================================================
    -->
  <PropertyGroup>
    <BuildingProject>false</BuildingProject>
  </PropertyGroup>
  <Target Name="BuildOnlySettings">

    <CreateProperty Value="true">
      <Output TaskParameter="Value" PropertyName="BuildingProject" />
    </CreateProperty>

  </Target>

  <!--
  ==================================================================================================
  PrepareForBuild

    Prepare the prerequisites for building.
  ==================================================================================================
  -->
  <PropertyGroup>
    <PrepareForBuildDependsOn></PrepareForBuildDependsOn>
  </PropertyGroup>
  <Target
    Name="PrepareForBuild" DependsOnTargets="$(PrepareForBuildDependsOn)">

    <!--
    These CreateProperty calls are required because TargetDir and TargetPath are defined
    to contain an item list. We want that item list to be expanded so that it can be used
    as a regular property value and not as an item-list-with-transform.
    -->
    <CreateProperty Value="$(TargetDir)">
      <Output TaskParameter="Value" PropertyName="TargetDir" />
    </CreateProperty>

    <CreateProperty Value="$(TargetPath)">
      <Output TaskParameter="Value" PropertyName="TargetPath" />
    </CreateProperty>

    <CreateProperty Value="$(TargetPdbDir)">
      <Output TaskParameter="Value" PropertyName="TargetPdbDir" />
    </CreateProperty>

    <!-- Create the directories for intermediate and final build products. -->
    <MakeDir Directories="$(IntermediateOutputPath);$(OutDir)" />
  </Target>

  <!--
  ==================================================================================================
  ResolveWixExtensionReferences

    Resolves WiX extension references to full paths. Any properties you use
    to resolve paths to extensions must be defined before importing this
    file or the extensions will be automatically resolved to $(WixExtDir).

    [IN]
    @(WixExtension) - WixExtension item group

    [OUT]
    @(_ResolvedWixExtensionPaths) - Item group with full paths to extensions
  ==================================================================================================
  -->
  <PropertyGroup>
    <ResolveWixExtensionReferencesDependsOn>
      PrepareForBuild
    </ResolveWixExtensionReferencesDependsOn>
  </PropertyGroup>
  <Target
    Name="ResolveWixExtensionReferences"
    DependsOnTargets="$(ResolveWixExtensionReferencesDependsOn)"
    Condition=" '@(WixExtension)' != ''">

    <!--
    The WixExtensionSearchPaths property is set to find assemblies in the following order:

        (1) $(ReferencePaths) - the reference paths property, which comes from the .USER file.
        (2) The hintpath from the referenced item itself, indicated by {HintPathFromItem}.
        (3) Treat the reference's Include as if it were a real file name.
        (4) Path specified by the WixExtDir property.
    -->
    <CreateProperty Condition=" '$(WixExtensionSearchPaths)' == '' " Value="
      $(ReferencePaths);
      {HintPathFromItem};
      {RawFileName};
      $(WixExtDir)
      ">
      <Output TaskParameter="Value" PropertyName="WixExtensionSearchPaths" />
    </CreateProperty>

    <ResolveWixReferences
      WixReferences="@(WixExtension)"
      SearchPaths="$(WixExtensionSearchPaths)"
      SearchFilenameExtensions=".dll">
      <Output TaskParameter="ResolvedWixReferences" ItemName="_AllResolvedWixExtensionPaths" />
    </ResolveWixReferences>

    <!-- Remove duplicate extension items that would cause build errors -->
    <RemoveDuplicates Inputs="@(_AllResolvedWixExtensionPaths)">
      <Output TaskParameter="Filtered" ItemName="_ResolvedWixExtensionPaths" />
    </RemoveDuplicates>
  </Target>

  <!--
  ==================================================================================================
  PreBuildEvent

    Run the pre-build event if there is one.
  ==================================================================================================
  -->
  <PropertyGroup>
    <PreBuildEventDependsOn>GetTargetPath</PreBuildEventDependsOn>
  </PropertyGroup>
  <Target
    Name="PreBuildEvent"
    DependsOnTargets="$(PreBuildEventDependsOn)"
    Condition=" '$(PreBuildEvent)' != '' ">

    <ReplaceString
      Text="$(PreBuildEvent)"
      OldValue="!(TargetPath)"
      NewValue="$(TargetPath)">
      
      <Output TaskParameter="Text" PropertyName="ExpandedPreBuildEvent" />
    </ReplaceString>
    
    <ReplaceString
      Text="$(ExpandedPreBuildEvent)"
      OldValue="!(TargetPdbPath)"
      NewValue="$(TargetPdbPath)">
      
      <Output TaskParameter="Text" PropertyName="ExpandedPreBuildEvent" />
    </ReplaceString>

    <Exec WorkingDirectory="$(OutDir)" Command="$(ExpandedPreBuildEvent)" />
  </Target>

  <!--
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  Resolve References Targets
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  -->

  <!--
  ==================================================================================================
  ResolveReferences
  ==================================================================================================
  -->
  <PropertyGroup>
    <ResolveReferencesDependsOn>
      BeforeResolveReferences;
      SplitProjectReferencesByType;
      ResolveProjectReferences;
      ResolveVCProjectReferences;
      ResolveWixLibraryReferences;
      ResolveWixExtensionReferences;
      AfterResolveReferences
    </ResolveReferencesDependsOn>
  </PropertyGroup>
  <Target
    Name="ResolveReferences"
    DependsOnTargets="$(ResolveReferencesDependsOn)" />

  <!--
  ==================================================================================================
  BeforeResolveReferences

    Redefine this target in your project in order to run tasks just before ResolveReferences.
  ==================================================================================================
  -->
  <Target Name="BeforeResolveReferences" />

  <!--
  ==================================================================================================
  AfterResolveReferences

    Redefine this target in your project in order to run tasks just after ResolveReferences.
  ==================================================================================================
  -->
  <Target Name="AfterResolveReferences" />

  <!--
  ==================================================================================================
  SplitProjectReferencesByType

    Split project references into two lists: VC project references and all others (handled by the
    MSBuild engine)

    [IN]
    @(ProjectReference) - the list of all project references

    [OUT]
    @(VCProjectReference) - the list of VC (managed VC++ to be exact) project references
    @(NonVCProjectReference) - the list of non-VC project references (MSBuild and potentially VSIP projects)
  ==================================================================================================
  -->
  <Target
    Name="SplitProjectReferencesByType"
    Condition=" '@(ProjectReference)' != '' ">

    <!-- Assign a project configuration to each project reference if we're building a solution file. -->
    <AssignProjectConfiguration
      ProjectReferences="@(ProjectReference)"
      SolutionConfigurationContents="$(CurrentSolutionConfigurationContents)"
      Condition=" '$(BuildingSolutionFile)' == 'true' ">

      <Output TaskParameter="AssignedProjects" ItemName="_ProjectReferenceWithConfiguration" />
    </AssignProjectConfiguration>

    <!--
    Otherwise (regular command line build or building inside the IDE) just copy the references
    as we don't need their configurations.
    -->
    <CreateItem Include="@(ProjectReference)" Condition=" '$(BuildingSolutionFile)' != 'true' ">
      <Output TaskParameter="Include" ItemName="_ProjectReferenceWithConfiguration" />
    </CreateItem>

    <!-- Copy all VC project references to the VCProjectReference item list (using the VC project extension) -->
    <CreateItem
      Include="@(_ProjectReferenceWithConfiguration)"
      Condition=" '%(Extension)' == '.vcproj' "
      AdditionalMetadata="MSBuildSourceProjectFileFullPath=%(FullPath)">

      <Output TaskParameter="Include" ItemName="VCProjectReference" />
    </CreateItem>

    <!-- Copy the rest of the project references to the NonVCProjectReference item list -->
    <CreateItem
      Include="@(_ProjectReferenceWithConfiguration)"
      Condition=" '%(Extension)' != '.vcproj' "
      AdditionalMetadata="MSBuildSourceProjectFileFullPath=%(FullPath)">

      <Output TaskParameter="Include" ItemName="NonVCProjectReference" />
    </CreateItem>
  </Target>


  <!--
  ==================================================================================================
  _SplitProjectReferencesByFileExistence

    Split referenced projects into two lists: those that exist on  disk and those that don't.

    [IN]
    @(NonVCProjectReference) - the list of non-VC project references (MSBuild and potentially VSIP projects)

    [OUT]
    @(_MSBuildProjectReferenceExistent) - the list of non-VC project references that exist on disk
    @(_MSBuildProjectReferenceNonexistent) - the list of non-VC project references that don't exist on disk
  ==================================================================================================
  -->
  <Target
    Name="_SplitProjectReferencesByFileExistence"
    DependsOnTargets="SplitProjectReferencesByType"
    Condition=" '@(NonVCProjectReference)' != '' ">

    <!--
    Use this task for matching projects with pre-resolved project outputs set by the IDE if building
    inside the IDE. The IDE only includes non-MSBuild projects in the output list. We'll use MSBuild
    to resolve MSBuild projects. This task will resolve VSIP (3rd party) project references and
    create a new item list with only project references to projects in the MSBuild format.
    -->
    <ResolveNonMSBuildProjectOutput
      ProjectReferences="@(NonVCProjectReference)"
      PreresolvedProjectOutputs="$(VSIDEResolvedNonMSBuildProjectOutputs)"
      Condition=" '$(BuildingInsideVisualStudio)' == 'true' ">

      <Output TaskParameter="ResolvedOutputPaths" ItemName="_ResolvedProjectReferencePaths" />
      <Output TaskParameter="UnresolvedProjectReferences" ItemName="_MSBuildProjectReference" />

    </ResolveNonMSBuildProjectOutput>

    <!--
    If building from the command line, simply copy the NonVCProjectReference item list to
    _MSBuildProjectReference, since we have to assume all non-VC projects are in the MSBuild format.
    We have no way of building VSIP (3rd party) projects from the command line.
    -->
    <CreateItem Include="@(NonVCProjectReference)" Condition=" '$(BuildingInsideVisualStudio)' != 'true' ">
      <Output TaskParameter="Include" ItemName="_MSBuildProjectReference" />
    </CreateItem>

    <!-- Break the project list into two lists: those that exist on disk and those that don't. -->
    <CreateItem Include="@(_MSBuildProjectReference)" Condition="Exists('%(Identity)')">
      <Output TaskParameter="Include" ItemName="_MSBuildProjectReferenceExistent" />
    </CreateItem>

    <CreateItem Include="@(_MSBuildProjectReference)" Condition="!Exists('%(Identity)')">
      <Output TaskParameter="Include" ItemName="_MSBuildProjectReferenceNonexistent" />
    </CreateItem>

  </Target>

  <!--
  ================================================================================================
  ResolveProjectReferences

    Builds all of the referenced projects to get their outputs.

    [IN]
    @(NonVCProjectReference) - The list of non-VC project references.

    [OUT]
    @(_ResolvedProjectReferencePaths) - Paths to referenced projects.
    @(WixLibProjects) - Paths to any .wixlibs that were built by referenced projects.
  ================================================================================================
  -->
  <Target
    Name="ResolveProjectReferences"
    DependsOnTargets="_SplitProjectReferencesByFileExistence"
    Condition=" '@(NonVCProjectReference)' != '' ">

    <!-- Issue a warning for each non-existent project. -->
    <Warning
      Text="The referenced project '%(_MSBuildProjectReferenceNonexistent.Identity)' does not exist."
      Condition=" '@(_MSBuildProjectReferenceNonexistent)' != '' " />

    <!--
    When building this project from the IDE or when building a .sln from the command line or
    when only building .wixlib project references, gather the referenced build outputs. The
    code that builds the .sln will already have built the project, so there's no need to do
    it again here and when building only .wixlib project references we'll use the results to
    determine which projects to build.

    The ContinueOnError setting is here so that, during project load, as much information as
    possible will be passed to the compilers.
    -->
    <MSBuild
      Projects="@(_MSBuildProjectReferenceExistent)"
      Targets="%(_MSBuildProjectReferenceExistent.Targets);GetTargetPath"
      Properties="%(_MSBuildProjectReferenceExistent.SetConfiguration);%(_MSBuildProjectReferenceExistent.SetPlatform)"
      Condition="('$(BuildingSolutionFile)' == 'true' or '$(BuildingInsideVisualStudio)' == 'true' or '$(BuildProjectReferences)' != 'true') and '@(_MSBuildProjectReferenceExistent)' != '' "
      ContinueOnError="!$(BuildingProject)">

      <Output TaskParameter="TargetOutputs" ItemName="_GatheredProjectReferencePaths" />
    </MSBuild>

    <!--
    Determine which project references should be built. Note: we will not build any project references
    if building in the IDE or building a .sln file because those build project references directly.

    If BuildProjectReferences is 'true' (the default) then take all MSBuild project references that exist
    on disk and add them to the list of things to build. This is the easy case.
    -->
    <CreateItem
      Include="@(_MSBuildProjectReferenceExistent)"
      Condition=" '$(BuildProjectReferences)' == 'true' and ('$(BuildingSolutionFile)' != 'true' and '$(BuildingInsideVisualStudio)' != 'true') ">

      <Output TaskParameter="Include" ItemName="_ProjectReferencesToBuild" />
    </CreateItem>

    <!--
    If BuildProjectReferences is 'wixlib' then build only the MSBuild project references that exist and
    create a .wixlib file. That requires us to first filter the gathered project references down to only
    those that build .wixlibs.

    Note that this functionality is broken in MSBuild v3.5 due to MSBuildSourceProjectFile metadata 
    being relative paths in v3.5 (versus full paths in v4.0).
    -->
    <CreateItem
      Include="@(_GatheredProjectReferencePaths)"
      Condition=" '$(BuildProjectReferences)' == 'wixlib' and '%(Extension)' == '.wixlib' and ('$(BuildingSolutionFile)' != 'true' and '$(BuildingInsideVisualStudio)' != 'true') ">

      <Output TaskParameter="Include" ItemName="_ReferencedWixLibPaths" />
    </CreateItem>

    <!--
    The second step when building only 'wixlib' project references is to create the list of existing MSBuild
    project references that do *not* build a .wixlib. These are the projects that will be skipped.
     -->
    <CreateItem
      Include="@(_MSBuildProjectReferenceExistent->'%(FullPath)')"
      Exclude="@(_ReferencedWixLibPaths->'%(MSBuildSourceProjectFile)')"
      Condition=" '$(BuildProjectReferences)' == 'wixlib' and ('$(BuildingSolutionFile)' != 'true' and '$(BuildingInsideVisualStudio)' != 'true') ">

      <Output TaskParameter="Include" ItemName="_ProjectReferencesToSkip" />
    </CreateItem>

    <!--
    Finally, when building only 'wixlib' project references, the list of projects to build are naturally the
    list of projects *not* being skipped.
    -->
    <CreateItem
      Include="@(_MSBuildProjectReferenceExistent->'%(FullPath)')"
      Exclude="@(_ProjectReferencesToSkip)"
      Condition=" '$(BuildProjectReferences)' == 'wixlib' and ('$(BuildingSolutionFile)' != 'true' and '$(BuildingInsideVisualStudio)' != 'true') ">

      <Output TaskParameter="Include" ItemName="_ProjectReferencesToBuild" />
    </CreateItem>

    <!-- Display a warning for all projects being skipped. -->
    <Warning
      Text="BuildProjectReferences set to '$(BuildProjectReferences)'. Skipping the non-Library project: %(_ProjectReferencesToSkip.Identity)"
      Condition=" '@(_ProjectReferencesToSkip)' != '' " />

    <Message
      Importance="low"
      Text="Project reference to build: %(_ProjectReferencesToBuild.Identity), properties: %(_ProjectReferencesToBuild.Properties)"
      Condition=" '@(_ProjectReferencesToBuild)' != '' " />

    <!--
    Build referenced projects when building from the command line.

    The $(ProjectReferenceBuildTargets) will normally be blank so that the project's default target
    is used during a P2P reference. However if a custom build process requires that the referenced
    project has a different target to build it can be specified.
    -->
    <MSBuild
      Projects="@(_ProjectReferencesToBuild)"
      Targets="$(ProjectReferenceBuildTargets)"
      Properties="%(_ProjectReferencesToBuild.SetConfiguration);%(_ProjectReferencesToBuild.SetPlatform)"
      Condition=" '@(_ProjectReferencesToBuild)' != '' ">

      <Output TaskParameter="TargetOutputs" ItemName="_BuiltProjectReferencePaths" />
    </MSBuild>

    <!-- Assign the unique gathered and built project references to the resolved project
         reference paths. -->
    <RemoveDuplicates Inputs="@(_GatheredProjectReferencePaths);@(_BuiltProjectReferencePaths)">
      <Output TaskParameter="Filtered" ItemName="_ResolvedProjectReferencePaths" />
      <Output TaskParameter="Filtered" ItemName="_MSBuildResolvedProjectReferencePaths" />
    </RemoveDuplicates>

    <!-- Create list of all .wixlib project references. -->
    <CreateItem
      Include="@(_ResolvedProjectReferencePaths)"
      Condition=" '%(Extension)' == '.wixlib' ">

      <Output TaskParameter="Include" ItemName="WixLibProjects" />
    </CreateItem>

    <Message
      Importance="low"
      Text="Library from referenced projects: %(WixLibProjects.Identity)"
      Condition=" '@(WixLibProjects)' != '' " />

  </Target>

  <!--
  ================================================================================================
  GetTargetPath

    This stand-alone target returns the name of the build product (i.e. MSI, MSM) that would be
    produced if we built this project.
  ================================================================================================
  -->
  <PropertyGroup>
    <GetTargetPathDependsOn>
      PrepareForBuild;
      AssignCultures
    </GetTargetPathDependsOn>
  </PropertyGroup>
  <Target
    Name="GetTargetPath"
    DependsOnTargets="$(GetTargetPathDependsOn)"
    Outputs="$(TargetPath)" />

  <!--
  ================================================================================================
  ResolveVCProjectReferences

    Find outputs of referenced VC projects (currently we never build VC projects ourselves).

    [IN]
    @(VCProjectReference) - the list of VC project references

    [OUT]
    @(_ResolvedProjectReferencePaths) - paths to projects' outputs
  ================================================================================================
  -->
  <Target
    Name="ResolveVCProjectReferences"
    Condition=" '@(VCProjectReference)' != '' "
    DependsOnTargets="SplitProjectReferencesByType">

    <!--
    Use the task for matching projects with pre-resolved project outputs set by the IDE
    if building inside the IDE.
    -->
    <ResolveNonMSBuildProjectOutput
      ProjectReferences="@(VCProjectReference)"
      PreresolvedProjectOutputs="$(VSIDEResolvedNonMSBuildProjectOutputs)"
      Condition=" '$(BuildingInsideVisualStudio)' == 'true' ">

      <Output TaskParameter="ResolvedOutputPaths" ItemName="_ResolvedVCProjectReferencePaths" />
    </ResolveNonMSBuildProjectOutput>

    <!--
    Use the task that uses VC project engine if building from the command line. Invoking this
    task only makes sense for building solution files, otherwise we won't have the necessary
    configuration information.
    -->
    <ResolveVCProjectOutput
      ProjectReferences="@(VCProjectReference)"
      Configuration="%(VCProjectReference.FullConfiguration)"
      SolutionFile="$(SolutionPath)"
      Override="$(VCBuildOverride)"
      Condition=" '$(BuildingSolutionFile)' == 'true' ">

      <Output TaskParameter="ResolvedOutputPaths" ItemName="_ResolvedVCProjectReferencePaths" />
    </ResolveVCProjectOutput>

    <Error
      Code="WIXTARGETS104"
      Text="MSBuild cannot resolve the reference to the Visual C++ project '%(VCProjectReference.Identity)' when building a stand-alone MSBuild project. To correctly resolve this reference, please build the solution file containing these projects."
      Condition=" '$(BuildingSolutionFile)' != 'true' and '$(BuildingInsideVisualStudio)' != 'true' " />

    <CreateItem Include="@(_ResolvedVCProjectReferencePaths)">
      <Output TaskParameter="Include" ItemName="_ResolvedProjectReferencePaths" />
    </CreateItem>

  </Target>

  <!--
  ================================================================================================
  ResolveWixLibraryReferences

    Resolve the library references to full paths.

    [IN]
    @(WixLibrary) - The list of .wixlib files.
    
    [OUT]
    @(_ResolvedWixLibraryPaths) - Item group with full paths to libraries
  ================================================================================================
  -->
  <PropertyGroup>
    <ResolveWixLibraryReferencesDependsOn>
      PrepareForBuild;
    </ResolveWixLibraryReferencesDependsOn>
  </PropertyGroup>
  <Target
    Name="ResolveWixLibraryReferences"
    DependsOnTargets="$(ResolveWixLibraryReferencesDependsOn)"
    Condition=" '@(WixLibrary)' != ''">

    <!--
    The WixLibrarySearchPaths property is set to find assemblies in the following order:

        (1) $(ReferencePaths) - the reference paths property, which comes from the .USER file.
        (2) The hintpath from the referenced item itself, indicated by {HintPathFromItem}.
        (3) Treat the reference's Include as if it were a real file name.
        (4) Path specified by the WixExtDir property.
    -->
    <CreateProperty Condition=" '$(WixLibrarySearchPaths)' == '' " Value="
      $(ReferencePaths);
      {HintPathFromItem};
      {RawFileName};
      $(WixExtDir)
      ">
      <Output TaskParameter="Value" PropertyName="WixLibrarySearchPaths" />
    </CreateProperty>

    <ResolveWixReferences
      WixReferences="@(WixLibrary)"
      SearchPaths="$(WixLibrarySearchPaths)"
      SearchFilenameExtensions=".wixlib">
      <Output TaskParameter="ResolvedWixReferences" ItemName="_AllResolvedWixLibraryPaths" />
    </ResolveWixReferences>
    
    <!-- Remove duplicate library items that would cause build errors -->
    <RemoveDuplicates Inputs="@(_AllResolvedWixLibraryPaths)">
      <Output TaskParameter="Filtered" ItemName="_ResolvedWixLibraryPaths" />
    </RemoveDuplicates>

  </Target>

  <!--
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  Compiler Define Targets
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  -->

  <!--
  ==================================================================================================
  AddCompilerDefineConstants

    Adds solution and project references to the constants passed into the compiler.
  ==================================================================================================
  -->
  <PropertyGroup>
    <AddCompilerDefineConstantsDependsOn>
      ResolveReferences;
      AddSolutionDefineConstants;
      AddProjectReferenceDefineConstants;
    </AddCompilerDefineConstantsDependsOn>
  </PropertyGroup>
  <Target
    Name="AddCompilerDefineConstants"
    DependsOnTargets="$(AddCompilerDefineConstantsDependsOn)">

    <CreateProperty Value="
      Configuration=$(ConfigurationName);
      OutDir=$(OutDir);
      Platform=$(PlatformName);
      ProjectDir=$(ProjectDir);
      ProjectExt=$(ProjectExt);
      ProjectFileName=$(ProjectFileName);
      ProjectName=$(ProjectName);
      ProjectPath=$(ProjectPath);
      TargetDir=$(TargetDir);
      TargetExt=$(TargetExt);
      TargetFileName=$(TargetFileName);
      TargetName=$(TargetName);
      TargetPath=$(TargetPath);
      ">
      <Output TaskParameter="Value" PropertyName="ProjectDefineConstants" />
    </CreateProperty>
    
  </Target>

  <!--
  ==================================================================================================
  AddSolutionDefineConstants

    Adds solution references to the constants passed into the compiler, but only when building
    from the Visual Studio IDE or when building a solution file via the command line.

    [OUT]
    $(SolutionDefineConstants) - the list of solution variables to be passed into the compiler
  ==================================================================================================
  -->
  <PropertyGroup>
    <DefineSolutionProperties Condition=" '$(DefineSolutionProperties)' == '' ">true</DefineSolutionProperties>
  </PropertyGroup>
  <Target
    Name="AddSolutionDefineConstants"
    Condition=" '$(DefineSolutionProperties)' == 'true' ">

    <Warning
      Text="Solution properties are only available during IDE builds or when building the solution file from the command line. To turn off this warning set &lt;DefineSolutionProperties&gt;false&lt;/DefineSolutionProperties&gt; in your .wixproj file."
      Condition=" '$(BuildingInsideVisualStudio)' != 'true' and '$(BuildingSolutionFile)' != 'true' " />

    <CreateProperty Value="$(SolutionDefineConstants);DevEnvDir=$(DevEnvDir)" Condition=" '$(DevEnvDir)' != '' ">
      <Output TaskParameter="Value" PropertyName="SolutionDefineConstants" />
    </CreateProperty>
    <CreateProperty Value="$(SolutionDefineConstants);SolutionDir=$(SolutionDir)" Condition=" '$(SolutionDir)' != '' ">
      <Output TaskParameter="Value" PropertyName="SolutionDefineConstants" />
    </CreateProperty>
    <CreateProperty Value="$(SolutionDefineConstants);SolutionExt=$(SolutionExt)" Condition=" '$(SolutionExt)' != '' ">
      <Output TaskParameter="Value" PropertyName="SolutionDefineConstants" />
    </CreateProperty>
    <CreateProperty Value="$(SolutionDefineConstants);SolutionFileName=$(SolutionFileName)" Condition=" '$(SolutionFileName)' != '' ">
      <Output TaskParameter="Value" PropertyName="SolutionDefineConstants" />
    </CreateProperty>
    <CreateProperty Value="$(SolutionDefineConstants);SolutionName=$(SolutionName)" Condition=" '$(SolutionName)' != '' ">
      <Output TaskParameter="Value" PropertyName="SolutionDefineConstants" />
    </CreateProperty>
    <CreateProperty Value="$(SolutionDefineConstants);SolutionPath=$(SolutionPath)" Condition=" '$(SolutionPath)' != '' ">
      <Output TaskParameter="Value" PropertyName="SolutionDefineConstants" />
    </CreateProperty>

  </Target>

  <!--
  ==================================================================================================
  AddProjectReferenceDefineConstants

    Adds project references to the constants passed into the compiler.

    [IN]
    @(_ResolvedProjectReferencePaths) - paths to projects' outputs
    $(VSProjectConfigurations) - map of project names to configurations, provided by VS when building in the IDE

    [OUT]
    $(ProjectReferenceDefineConstants) - the list of referenced project variables to be passed into the compiler
  ==================================================================================================
  -->
  <Target
    Name="AddProjectReferenceDefineConstants"
    Condition=" '@(_ResolvedProjectReferencePaths)' != '' ">

    <CreateProjectReferenceDefineConstants
      ProjectReferencePaths="@(_ResolvedProjectReferencePaths)"
      ProjectConfigurations="$(VSProjectConfigurations)">

      <Output TaskParameter="DefineConstants" PropertyName="ProjectReferenceDefineConstants" />
    </CreateProjectReferenceDefineConstants>
  </Target>

  <!--
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  CompileAndLink Targets
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  -->

  <!--
  ==================================================================================================
  CompileAndLink
  ==================================================================================================
  -->
  <PropertyGroup>
    <CompileAndLinkDependsOn>
      ResolveReferences;
      BeforeCompileAndLink;
      _TimeStampBeforeCompileAndLink;
      ConvertReferences;
      ConvertBundleReferences;
      Harvest;
      GenerateCode;
      Compile;
      Lib;
      Link;
      UpdateLinkFileWrites;
      _TimeStampAfterCompileAndLink;
      AfterCompileAndLink
    </CompileAndLinkDependsOn>
  </PropertyGroup>
  <Target
    Name="CompileAndLink"
    DependsOnTargets="$(CompileAndLinkDependsOn)" />

  <!--
  ==================================================================================================
  BeforeCompileAndLink

    Redefine this target in your project in order to run tasks just before CompileAndLink.
  ==================================================================================================
  -->
  <Target Name="BeforeCompileAndLink" />

  <!--
  ==================================================================================================
  AfterCompileAndLink

    Redefine this target in your project in order to run tasks just after CompileAndLink.
  ==================================================================================================
  -->
  <Target Name="AfterCompileAndLink" />

  <!--
  ==================================================================================================
  _TimeStampBeforeCompileAndLink

    Record a timestamp so that we can compare it to a new timestamp during PostBuildEvent if
    necessary.
  ==================================================================================================
  -->
  <Target
    Name="_TimeStampBeforeCompileAndLink" >

    <CreateItem Include="$(TargetPath)">
      <Output TaskParameter="Include" ItemName="TargetOutput" />
    </CreateItem>
    
    <CreateItem Include="%(TargetOutput.ModifiedTime)">
      <Output TaskParameter="Include" PropertyName="_TargetOutputTimestampBeforeCompileAndLink" />
    </CreateItem>

  </Target>

  <!--
  ==================================================================================================
  _TimeStampAfterCompileAndLink

    Take before and after timestamps so that we can compare them (used by post-build events that
    are set to fire "OnOutputUpdated").
  ==================================================================================================
  -->
  <Target
    Name="_TimeStampAfterCompileAndLink">

    <CreateItem Include="%(TargetOutput.ModifiedTime)">
      <Output TaskParameter="Include" PropertyName="_TargetOutputTimestampAfterCompileAndLink" />
    </CreateItem>

  </Target>

  <!--
  ==================================================================================================
  Harvest
  ==================================================================================================
  -->
  <PropertyGroup>
    <HarvestDependsOn>
      HarvestProjects;
      HarvestDirectory;
      HarvestFile;
    </HarvestDependsOn>
  </PropertyGroup>
  <Target
    Name="Harvest"
    DependsOnTargets="$(HarvestDependsOn)" />

  <!--
  ==================================================================================================
  GenerateCode
  ==================================================================================================
  -->
  <PropertyGroup>
    <GenerateCodeDependsOn>
      RefreshGeneratedFile;
      RefreshBundleGeneratedFile
    </GenerateCodeDependsOn>
  </PropertyGroup>
  <Target Name="GenerateCode"
    DependsOnTargets="$(GenerateCodeDependsOn)" />

  <!--
  ==================================================================================================
  Signing
  ==================================================================================================
  -->
  <PropertyGroup>
    <InternalSignDependsOn Condition=" '$(OutputType)' == 'Module' ">
      GetMsmsToSign;
      InternalSignMsm;
    </InternalSignDependsOn>
    <InternalSignDependsOn Condition=" '$(OutputType)' == 'Package' ">
      GetCabsToSign;
      GetMsiToSign;
      InternalSignCabs;
      InscribeMsi;
      InternalSignMsi;
    </InternalSignDependsOn>
    <InternalSignDependsOn Condition=" '$(OutputType)' == 'Bundle' ">
      GetContainersToSign;
      InternalSignContainers;
      InscribeBundleEngine;
      InternalSignBundleEngine;
      InscribeBundle;
      InternalSignBundle;
    </InternalSignDependsOn>

    <SigningDependsOn>
      CompileAndLink;
      BeforeSigning;
      $(InternalSignDependsOn);
      AfterSigning
    </SigningDependsOn>
  </PropertyGroup>
  <Target
    Name="Signing"
    DependsOnTargets="$(SigningDependsOn)"
    Inputs="@(SignTargetPath)"
    Outputs="$(IntermediateOutputPath)$(SignedFile)"
    Condition=" '@(SignTargetPath)' != '' ">

    <CreateItem Include="$(IntermediateOutputPath)$(SignedFile)">
      <Output TaskParameter="Include" ItemName="FileWrites" />
    </CreateItem>

    <WriteLinesToFile
        File="$(IntermediateOutputPath)$(SignedFile)"
        Lines="^$(MSBuildProjectFullPath);@(SignMsm);@(SignCabs);@(SignMsi);@(SignContainers);@(SignBundleEngine);@(SignBundle)"
        Overwrite="true" />
  </Target>

  <!-- Internal targets so correct signing targets are called. -->
  <Target
      Name="GetMsmsToSign"
      Inputs="@(SignTargetPath)"
      Outputs="$(IntermediateOutputPath)$(SignedFile)">
    <CreateItem Include="@(SignTargetPath)">
      <Output TaskParameter="Include" ItemName="SignMsm" />
      <Output TaskParameter="Include" ItemName="FileWrites" />
    </CreateItem>
  </Target>

  <Target
    Name="InternalSignMsm"
    DependsOnTargets="SignMsm"
    Condition=" '@(SignMsm)' != '' " />

  <Target
      Name="GetCabsToSign"
      Inputs="@(SignTargetPath)"
      Outputs="$(IntermediateOutputPath)$(SignedFile)">
    <GetCabList Database="%(SignTargetPath.FullPath)">
      <Output TaskParameter="CabList" ItemName="SignCabs" />
      <Output TaskParameter="CabList" ItemName="FileWrites" />
    </GetCabList>
  </Target>

  <Target
    Name="InternalSignCabs"
    DependsOnTargets="SignCabs"
    Condition=" '@(SignCabs)' != '' " />

  <Target
      Name="GetMsiToSign"
      Inputs="@(SignTargetPath)"
      Outputs="$(IntermediateOutputPath)$(SignedFile)">
    <CreateItemAvoidingInference InputProperties="@(SignTargetPath)">
      <Output TaskParameter="OuputItems" ItemName="SignMsi" />
      <Output TaskParameter="OuputItems" ItemName="FileWrites" />
    </CreateItemAvoidingInference>
  </Target>

  <Target
    Name="InternalSignMsi"
    DependsOnTargets="SignMsi"
    Inputs="@(SignTargetPath)"
    Outputs="$(IntermediateOutputPath)$(SignedFile)"
    Condition=" '@(SignMsi)' != '' " />

  <Target
      Name="GetContainersToSign"
      Inputs="@(SignTargetPath)"
      Outputs="$(IntermediateOutputPath)$(SignedFile)">
    <!-- TODO: implement signing detached containers -->
  </Target>

  <Target
    Name="InternalSignContainers"
    DependsOnTargets="SignContainers"
    Condition=" '@(SignContainers)' != '' " />

  <Target
    Name="InternalSignBundleEngine"
    DependsOnTargets="SignBundleEngine"
    Condition=" '@(SignBundleEngine)' != '' " />

  <Target
    Name="InternalSignBundle"
    DependsOnTargets="SignBundle"
    Condition=" '@(SignBundle)' != '' " />

  <!--
  ==================================================================================================
  BeforeSigning

    Redefine this target in your project in order to run tasks just before all signing tasks.
  ==================================================================================================
  -->
  <Target Name="BeforeSigning" />

  <!--
  ==================================================================================================
  SignMsm

    Redefine this target in your project in order to sign merge modules.

    [IN]
    @(SignMsm) - merge module files to sign.
  ==================================================================================================
  -->
  <Target Name="SignMsm" />

  <!--
  ==================================================================================================
  SignCabs

    Redefine this target in your project in order to sign the cabs of your database.

    [IN]
    @(SignCabs) - cabinet files to sign.
  ==================================================================================================
  -->
  <Target Name="SignCabs" />

  <!--
  ==================================================================================================
  SignMsi

    Redefine this target in your project in order to sign your database, after it has been inscribed
    with the signatures of your signed cabs.

    [IN]
    @(SignMsi) - database files to sign.
  ==================================================================================================
  -->
  <Target Name="SignMsi" />

  <!--
  ==================================================================================================
  SignContainers

    Redefine this target in your project in order to sign your bundle's detached containers.

    [IN]
    @(SignContainers) - detached container files to sign.
  ==================================================================================================
  -->
  <Target Name="SignContainers" />

  <!--
  ==================================================================================================
  SignBundleEngine

    Redefine this target in your project in order to sign your bundle, after it has been inscribed
    with the signatures of your signed containers.

    [IN]
    @(SignBundleEngine) - bundle engine file to sign.
  ==================================================================================================
  -->
  <Target Name="SignBundleEngine" />

  <!--
  ==================================================================================================
  SignBundle

    Redefine this target in your project in order to sign your bundle, after the attached container
    is reattached.

    [IN]
    @(SignBundle) - bundle file to sign.
  ==================================================================================================
  -->
  <Target Name="SignBundle" />

  <!--
  ==================================================================================================
  AfterSigning

    Redefine this target in your project in order to run tasks just after all signing tasks.
  ==================================================================================================
  -->
  <Target Name="AfterSigning" />

  <!--
  ================================================================================================
  ConvertReferences

    Converts project references to HeatProject items to auto generate authoring.
  ================================================================================================
  -->
  <Target
    Name="ConvertReferences"
    Condition=" $(EnableProjectHarvesting) and ('$(OutputType)' == 'Package' or '$(OutputType)' == 'PatchCreation' or '$(OutputType)' == 'Module') ">

    <CreateItem Include="@(_MSBuildProjectReferenceExistent)" Condition=" '%(_MSBuildProjectReferenceExistent.DoNotHarvest)' == '' " AdditionalMetadata="DirectoryIds=%(_MSBuildProjectReferenceExistent.RefTargetDir);ProjectOutputGroups=Binaries%3BSymbols%3BSources%3BContent%3BSatellites%3BDocuments;ProjectName=%(_MSBuildProjectReferenceExistent.Name);HeatOutput=$(IntermediateOutputPath)_%(_MSBuildProjectReferenceExistent.Filename).wxs">
      <Output TaskParameter="Include" ItemName="HeatProject" />
      <Output TaskParameter="Include" ItemName="_HeatProjectReference" />
    </CreateItem>

    <Error
      Text="The following files are deprecated and should be removed from your project(s): @(Compile->'%(Identity)', ', ')"
      Condition=" '%(Compile.GenerateComponentGroups)' != '' " />

    <CreateItem Include="$(HarvestProjectsGeneratedFile)">
      <!-- Unconditionally generate Compile items so they are always linked in. -->
      <Output TaskParameter="Include" ItemName="Compile" />
      <Output TaskParameter="Include" ItemName="_GeneratedFiles" />
    </CreateItem>

  </Target>

  <!--
  ================================================================================================
  ConvertBundleReferences

    Converts project references in Bundle projects to HeatProject items to auto generate authoring.
  ================================================================================================
  -->
  <Target
    Name="ConvertBundleReferences"
    Condition=" $(EnableProjectHarvesting) and ('$(OutputType)' == 'Bundle') ">

    <CreateItem Include="@(_MSBuildProjectReferenceExistent)" Condition=" '%(_MSBuildProjectReferenceExistent.DoNotHarvest)' == '' " AdditionalMetadata="ProjectOutputGroups=Binaries%3BSymbols%3BSources%3BContent%3BSatellites%3BDocuments;GenerateType=payloadgroup;HeatOutput=$(IntermediateOutputPath)_%(_MSBuildProjectReferenceExistent.Filename).wxs">
      <Output TaskParameter="Include" ItemName="HeatProject" />
      <Output TaskParameter="Include" ItemName="_HeatProjectReference" />
    </CreateItem>

    <Error
      Text="The following files are deprecated and should be removed from your project(s): @(Compile->'%(Identity)', ', ')"
      Condition=" '%(Compile.GenerateComponentGroups)' != '' " />

    <CreateItem Include="$(HarvestProjectsGeneratedFile)">
      <!-- Unconditionally generate Compile items so they are always linked in. -->
      <Output TaskParameter="Include" ItemName="Compile" />
      <Output TaskParameter="Include" ItemName="_GeneratedFiles" />
    </CreateItem>

  </Target>

  <!--
  ================================================================================================
  CombineHarvestProjects

    Combines HeatProject and HarvestProject items together and ensures each has HeatOutput metadata.
  ================================================================================================
  -->
  <Target Name="CombineHarvestProjects"
    Condition=" '@(HeatProject)' != '' or '@(HarvestProject)' != '' ">

    <!-- Add default HeatOutputs for those without one specified -->
    <CreateItem Include="@(HeatProject)" Condition= " '%(HeatProject.HeatOutput)' == '' "
    AdditionalMetadata="HeatOutput=$(IntermediateOutputPath)_%(HeatProject.Filename).wxs">
      <Output TaskParameter="Include" ItemName="_AllHeatProjects" />
    </CreateItem>
    <CreateItem Include="@(HarvestProject)" Condition= " '%(HarvestProject.HeatOutput)' == '' "
    AdditionalMetadata="HeatOutput=$(IntermediateOutputPath)_%(HarvestProject.Filename).wxs">
      <Output TaskParameter="Include" ItemName="_AllHeatProjects" />
    </CreateItem>


    <CreateItem Include="@(HeatProject)" Condition= " '%(HeatProject.HeatOutput)' != '' ">
      <Output TaskParameter="Include" ItemName="_AllHeatProjects" />
    </CreateItem>
    <CreateItem Include="@(HarvestProject)" Condition= " '%(HarvestProject.HeatOutput)' != '' ">
      <Output TaskParameter="Include" ItemName="_AllHeatProjects" />
    </CreateItem>

  </Target>

  <!--
  ================================================================================================
  HarvestProjects

    Harvests outputs of other MSBuild projects files using the VS project extension to heat.exe.

    [IN]
    @(HarvestProject)
    @(HeatProject)
        - The list of projects to harvest. HeatProject is provided for backward compatibility.
          You should use HarvestProject instead.

    %(HarvestProject.Transforms)
    %(HeatProject.Transforms)
        - XSL transforms to apply to the harvested WiX.

    %(HarvestProject.ProjectOutputGroups)
    %(HeatProjects.ProjectOutputGroups)
        - The project output groups to harvest 

    [OUT]
    %(HeatOutput)
        - The generated .wxs files which are added to the @(Compile) item list.
  ================================================================================================
  -->
  <PropertyGroup>
    <HarvestProjectsDependsOn>CombineHarvestProjects</HarvestProjectsDependsOn>
  </PropertyGroup>
  <Target Name="HarvestProjects"
    DependsOnTargets="$(HarvestProjectsDependsOn)"
    Inputs="@(_AllHeatProjects);%(_AllHeatProjects.Transforms);$(MSBuildAllProjects);$(ProjectPath)"
    Outputs="@(_AllHeatProjects -> '%(HeatOutput)')"
    Condition=" $(EnableProjectHarvesting) and ('@(HeatProject)' != '' or '@(HarvestProject)' != '') ">

    <!--For HeatProject items supporting MSBuild 2.0-->
    <HeatProject
      NoLogo="$(HarvestProjectsNoLogo)"
      SuppressAllWarnings="$(HarvestProjectsSuppressAllWarnings)"
      SuppressSpecificWarnings="$(HarvestProjectsSuppressSpecificWarnings)"
      ToolPath="$(WixToolPath)"
      TreatWarningsAsErrors="$(HarvestProjectsTreatWarningsAsErrors)"
      TreatSpecificWarningsAsErrors="$(HarvestProjectsTreatSpecificWarningsAsErrors)"
      VerboseOutput="$(HarvestProjectsVerboseOutput)"
      AutogenerateGuids="$(HarvestProjectsAutogenerateGuids)"
      GenerateGuidsNow="$(HarvestProjectsGenerateGuidsNow)"
      OutputFile="%(_AllHeatProjects.HeatOutput)"
      SuppressFragments="$(HarvestProjectsSuppressFragments)"
      SuppressUniqueIds="$(HarvestProjectsSuppressUniqueIds)"
      Transforms="%(_AllHeatProjects.Transforms)"
      Project="%(_AllHeatProjects.FullPath)"
      ProjectOutputGroups="%(_AllHeatProjects.ProjectOutputGroups)"
      GenerateType="%(_AllHeatProjects.GenerateType)"
      DirectoryIds="%(_AllHeatProjects.DirectoryIds)"
      ProjectName="%(_AllHeatProjects.ProjectName)"
      Configuration="%(_AllHeatProjects.Configuration)"
      Platform="%(_AllHeatProjects.Platform)"
      RunAsSeparateProcess="$(RunWixToolsOutOfProc)"
      GenerateWixVariables="$(HarvestProjectsGenerateWixVariables)"
      AdditionalOptions="$(HarvestProjectsAdditionalOptions)">

      <Output TaskParameter="OutputFile" ItemName="Compile" />
      <Output TaskParameter="OutputFile" ItemName="FileWrites" />

    </HeatProject>

  </Target>

  <!--
  ================================================================================================
  HarvestDirectory

    Harvests directories using heat.exe.

    [IN]
    @(HarvestDirectory) - The list of directories to harvest.
    %(HarvestDirectory.Transforms) - XSL transforms to apply to the harvested WiX.
    %(HarvestDirectory.ComponentGroupName) -  The name of the ComponentGroup to create.
    %(HarvestDirectory.DirectoryRefId) - The ID of the directory to reference instead of TARGETDIR.
    %(HarvestDirectory.KeepEmptyDirectories) - Whether to create Directory entries for empty directories.
    %(HarvestDirectory.PreprocessorVariable) - Substitute SourceDir for another variable name (ex: var.Dir).
    %(HarvestDirectory.SuppressCom) - Suppress COM elements.
    %(HarvestDirectory.SuppressRootDirectory) - Suppress a Directory element for the root directory.
    $(HarvestDirectory.SuppressRegistry) - Suppress registry harvesting.

    [OUT]
    $(IntermediateOutputPath)_%(HarvestDirectory.ComponentGroupName)_dir.wxs
        - The generated .wxs files which are added to the @(Compile) item list.
  ================================================================================================
  -->

  <PropertyGroup>
    <HarvestDirectoryDependsOn>
      GetHarvestDirectoryContent
    </HarvestDirectoryDependsOn>
  </PropertyGroup>

  <!-- Creates items to include content since wildcards will not work in Target/@Inputs. -->
  <Target Name="GetHarvestDirectoryContent">
    <CreateItem Include="@(HarvestDirectory->'%(FullPath)\**\*')">
      <Output TaskParameter="Include" ItemName="_HarvestDirectoryContent" />
    </CreateItem>
  </Target>

  <Target Name="HarvestDirectory"
    DependsOnTargets="$(HarvestDirectoryDependsOn)"
    Inputs="@(_HarvestDirectoryContent);%(HarvestDirectory.Transforms)"
    Outputs="$(IntermediateOutputPath)_%(HarvestDirectory.ComponentGroupName)_dir.wxs"
    Condition=" '@(HarvestDirectory)' != '' ">

    <HeatDirectory
      NoLogo="$(HarvestDirectoryNoLogo)"
      SuppressAllWarnings="$(HarvestDirectorySuppressAllWarnings)"
      SuppressSpecificWarnings="$(HarvestDirectorySuppressSpecificWarnings)"
      ToolPath="$(WixToolPath)"
      TreatWarningsAsErrors="$(HarvestDirectoryTreatWarningsAsErrors)"
      TreatSpecificWarningsAsErrors="$(HarvestDirectoryTreatSpecificWarningsAsErrors)"
      VerboseOutput="$(HarvestDirectoryVerboseOutput)"
      AutogenerateGuids="$(HarvestDirectoryAutogenerateGuids)"
      GenerateGuidsNow="$(HarvestDirectoryGenerateGuidsNow)"
      OutputFile="$(IntermediateOutputPath)_%(HarvestDirectory.ComponentGroupName)_dir.wxs"
      SuppressFragments="$(HarvestDirectorySuppressFragments)"
      SuppressUniqueIds="$(HarvestDirectorySuppressUniqueIds)"
      Transforms="%(HarvestDirectory.Transforms)"
      Directory="@(HarvestDirectory)"
      ComponentGroupName="%(HarvestDirectory.ComponentGroupName)"
      DirectoryRefId="%(HarvestDirectory.DirectoryRefId)"
      KeepEmptyDirectories="%(HarvestDirectory.KeepEmptyDirectories)"
      PreprocessorVariable="%(HarvestDirectory.PreprocessorVariable)"
      RunAsSeparateProcess="$(RunWixToolsOutOfProc)"
      SuppressCom="%(HarvestDirectory.SuppressCom)"
      SuppressRootDirectory="%(HarvestDirectory.SuppressRootDirectory)"
      SuppressRegistry="%(HarvestDirectory.SuppressRegistry)"
      AdditionalOptions="$(HarvestDirectoryAdditionalOptions)">

      <Output TaskParameter="OutputFile" ItemName="Compile" />
      <Output TaskParameter="OutputFile" ItemName="FileWrites" />

    </HeatDirectory>

  </Target>

  <!--
  ================================================================================================
  HarvestFile

    Harvests files of different types using heat.exe. This can harvest registry from
    self-registering files, files with typelibs, and more.

    [IN]
    @(HarvestFile) - The list of files to harvest.
    %(HarvestFile.Transforms) - XSL transforms to apply to the harvested WiX.
    %(HarvestFile.ComponentGroupName) - The name of the ComponentGroup to create.
    %(HarvestFile.DirectoryRefId) - The ID of the directory to reference instead of TARGETDIR.
    %(HarvestFile.PreprocessorVariable) - Substitute SourceDir for another variable name (ex: var.Dir).
    %(HarvestFile.SuppressCom) - Suppress COM elements.
    %(HarvestFile.SuppressRootDirectory) - Suppress a Directory element for the root directory.
    $(HarvestFile.SuppressRegistry) - Suppress registry harvesting.

    [OUT]
    $(IntermediateOutputPath)_%(HarvestFile.Filename)_file.wxs
        - The generated .wxs files which are added to the @(Compile) item list.
  ================================================================================================
  -->

  <PropertyGroup>
    <HarvestFileDependsOn></HarvestFileDependsOn>
  </PropertyGroup>
  <Target Name="HarvestFile"
    DependsOnTargets="$(HarvestFileDependsOn)"
    Inputs="@(HarvestFile);%(HarvestFile.Transforms)"
    Outputs="$(IntermediateOutputPath)_%(HarvestFile.Filename)_file.wxs"
    Condition=" '@(HarvestFile)' != '' ">

    <HeatFile
      NoLogo="$(HarvestFileNoLogo)"
      SuppressAllWarnings="$(HarvestFileSuppressAllWarnings)"
      SuppressSpecificWarnings="$(HarvestFileSuppressSpecificWarnings)"
      ToolPath="$(WixToolPath)"
      TreatWarningsAsErrors="$(HarvestFileTreatWarningsAsErrors)"
      TreatSpecificWarningsAsErrors="$(HarvestFileTreatSpecificWarningsAsErrors)"
      VerboseOutput="$(HarvestFileVerboseOutput)"
      AutogenerateGuids="$(HarvestFileAutogenerateGuids)"
      GenerateGuidsNow="$(HarvestFileGenerateGuidsNow)"
      OutputFile="$(IntermediateOutputPath)_%(HarvestFile.Filename)_file.wxs"
      SuppressFragments="$(HarvestFileSuppressFragments)"
      SuppressUniqueIds="$(HarvestFileSuppressUniqueIds)"
      Transforms="%(HarvestFile.Transforms)"
      File="@(HarvestFile)"
      ComponentGroupName="%(HarvestFile.ComponentGroupName)"
      DirectoryRefId="%(HarvestFile.DirectoryRefId)"
      PreprocessorVariable="%(HarvestFile.PreprocessorVariable)"
      RunAsSeparateProcess="$(RunWixToolsOutOfProc)" 
      SuppressCom="%(HarvestFile.SuppressCom)"
      SuppressRegistry="%(HarvestFile.SuppressRegistry)"
      SuppressRootDirectory="%(HarvestFile.SuppressRootDirectory)"
      AdditionalOptions="$(HarvestFileAdditionalOptions)">

      <Output TaskParameter="OutputFile" ItemName="Compile" />
      <Output TaskParameter="OutputFile" ItemName="FileWrites" />

    </HeatFile>

  </Target>

  <!--
  ================================================================================================
  RefreshGeneratedFile

    Generates code based on metadata defined in project references.

    [IN]
    @(_MSBuildResolvedProjectReferencePaths) - The list of MSBuildable project references.

    [OUT]
    @(_GeneratedFiles) - The generated source file.
  ================================================================================================
  -->
  <PropertyGroup>
    <RefreshGeneratedFileDependsOn></RefreshGeneratedFileDependsOn>
  </PropertyGroup>
  <Target Name="RefreshGeneratedFile"
    DependsOnTargets="$(RefreshGeneratedFileDependsOn)"
    Inputs="@(_MSBuildResolvedProjectReferencePaths);@(Compile);$(ProjectPath)"
    Outputs="@(_GeneratedFiles)"
    Condition=" $(EnableProjectHarvesting) and (('$(OutputType)' == 'Package' or '$(OutputType)' == 'PatchCreation' or '$(OutputType)' == 'Module') and '@(_GeneratedFiles)' != '') ">

    <RefreshGeneratedFile
      GeneratedFiles="@(_GeneratedFiles)"
      ProjectReferencePaths="@(_MSBuildResolvedProjectReferencePaths)" />

  </Target>

  <!--
  ================================================================================================
  RefreshBundleGeneratedFile

    Generates code for bundle projects based on metadata defined in project references.

    [IN]
    @(_MSBuildResolvedProjectReferencePaths) - The list of MSBuildable project references.

    [OUT]
    @(_GeneratedFiles) - The generated source file.
  ================================================================================================
  -->
  <PropertyGroup>
    <RefreshBundleGeneratedFileDependsOn></RefreshBundleGeneratedFileDependsOn>
  </PropertyGroup>
  <Target Name="RefreshBundleGeneratedFile"
    DependsOnTargets="$(RefreshBundleGeneratedFileDependsOn)"
    Inputs="@(_MSBuildResolvedProjectReferencePaths);@(Compile);$(ProjectPath)"
    Outputs="@(_GeneratedFiles)"
    Condition=" $(EnableProjectHarvesting) and ('$(OutputType)' == 'Bundle' and '@(_GeneratedFiles)' != '') ">

    <RefreshBundleGeneratedFile
      GeneratedFiles="@(_GeneratedFiles)"
      ProjectReferencePaths="@(_MSBuildResolvedProjectReferencePaths)" />

  </Target>

  <!--
  ================================================================================================
  GenerateCompileWithObjectPath

    Generates metadata on the for compile output objects.

  ================================================================================================
  -->
  <PropertyGroup>
    <GenerateCompileWithObjectPathDependsOn></GenerateCompileWithObjectPathDependsOn>
  </PropertyGroup>
  <Target Name="GenerateCompileWithObjectPath"
      Condition=" '@(Compile)' != '' ">

    <GenerateCompileWithObjectPath
        Compile="@(Compile)"
        IntermediateOutputPath="$(IntermediateOutputPath)">
      <Output TaskParameter="CompileWithObjectPath" ItemName="_CompileWithObjectPath" />
    </GenerateCompileWithObjectPath>

  </Target>

  <!--
  ================================================================================================
  Compile

    Compiles the wxs files into wixobj files using candle.exe.

    [IN]
    @(Compile) - The list of wxs files to compile.
    @(Content) - Files that the project uses in the installer.
    @(WixExtension) - The list of wixlib or wix dll extensions.

    [OUT]
    @(CompileObjOutput) - The compiled .wixobj files.
  ================================================================================================
  -->
  <PropertyGroup>
    <CompileDependsOn>
      PrepareForBuild;
      ResolveWixExtensionReferences;
      GenerateCompileWithObjectPath
    </CompileDependsOn>
  </PropertyGroup>
  <Target
    Name="Compile"
    Inputs="@(Compile);
            @(Content);
            @(_ResolvedWixExtensionPaths);
            @(_ResolvedProjectReferencePaths);
            $(MSBuildAllProjects)"
    Outputs="@(_CompileWithObjectPath -> '%(ObjectPath)%(Filename)$(IntermediateExt)')"
    DependsOnTargets="$(CompileDependsOn)"
    Condition=" '@(Compile)' != '' ">

    <Candle
      SourceFiles="@(_CompileWithObjectPath)"
      AdditionalOptions="$(CompilerAdditionalOptions)" 
      DefineConstants="$(DefineConstants);$(SolutionDefineConstants);$(ProjectDefineConstants);$(ProjectReferenceDefineConstants)"
      ExtensionDirectory="$(WixExtDir)"
      Extensions="@(_ResolvedWixExtensionPaths)"
      FipsCompliant="$(FipsCompliant)"
      SuppressFilesVitalByDefault="$(SuppressFilesVitalByDefault)"
      PreprocessToStdOut="$(PreprocessToStdOut)"
      PreprocessToFile="$(PreprocessToFile)"
      IncludeSearchPaths="$(IncludeSearchPaths)"
      InstallerPlatform="$(InstallerPlatform)"
      NoLogo="$(CompilerNoLogo)"
      OnlyValidateDocuments="$(OnlyValidateDocuments)" 
      OutputFile="%(_CompileWithObjectPath.ObjectPath)"
      Pedantic="$(Pedantic)"
      ReferencePaths="$(ReferencePaths)"
      RunAsSeparateProcess="$(RunWixToolsOutOfProc)"
      ShowSourceTrace="$(ShowSourceTrace)"
      SuppressAllWarnings="$(CompilerSuppressAllWarnings)"
      SuppressSchemaValidation="$(CompilerSuppressSchemaValidation)"
      SuppressSpecificWarnings="$(CompilerSuppressSpecificWarnings)"
      ToolPath="$(WixToolPath)"
      TreatWarningsAsErrors="$(CompilerTreatWarningsAsErrors)"
      TreatSpecificWarningsAsErrors="$(CompilerTreatSpecificWarningsAsErrors)" 
      VerboseOutput="$(CompilerVerboseOutput)">
    </Candle>

    <!-- These will be still be set if the Compile target is up to date. -->
    <CreateItem Include="@(_CompileWithObjectPath -> '%(ObjectPath)%(Filename)$(IntermediateExt)')">
      <Output TaskParameter="Include" ItemName="CompileObjOutput" />
    </CreateItem>

    <CreateItem Include="@(CompileObjOutput)">
      <Output TaskParameter="Include" ItemName="FileWrites" />
    </CreateItem>
  </Target>

  <!--
  ================================================================================================
  InscribeMsi

    To be called after signing an MSI's cabs - inscribes an MSI with the digital signature of its
      external cabs.

    [IN/OUT]
    @(SignTargetPath) - The database file to inscribe - database file will be modified in-place.

    [OUT]
    @(SignMsi) - The database file to sign.
  ================================================================================================
  -->
  <PropertyGroup>
    <InscribeMsiDependsOn>
      PrepareForBuild;
      ResolveWixExtensionReferences;
      CompileAndLink;
      InternalSignCabs
    </InscribeMsiDependsOn>
  </PropertyGroup>
  <Target
      Name="InscribeMsi"
      DependsOnTargets="$(InscribeMsiDependsOn)"
      Inputs="@(SignTargetPath)"
      Outputs="$(IntermediateOutputPath)$(SignedFile)"
      Condition=" '@(SignCabs)' != '' ">

    <Insignia
        DatabaseFile="%(SignTargetPath.FullPath)"
        OutputFile="%(SignTargetPath.FullPath)"
        ToolPath="$(WixToolPath)"
        NoLogo="$(InscribeNoLogo)"
        RunAsSeparateProcess="$(RunWixToolsOutOfProc)"
        SuppressAllWarnings="$(InscribeSuppressAllWarnings)"
        SuppressSpecificWarnings="$(InscribeSuppressSpecificWarnings)"
        TreatWarningsAsErrors="$(InscribeTreatWarningsAsErrors)"
        TreatSpecificWarningsAsErrors="$(InscribeTreatSpecificWarningsAsErrors)"
        VerboseOutput="$(InscribeVerboseOutput)"
        AdditionalOptions="$(InscribeAdditionalOptions)" />
  </Target>

  <!--
  ================================================================================================
  InscribeBundleEngine

    To be called after signing a bundle's detached containers. Also removes attached container
    so engine can be signed without attached container.

    [IN]
    @(SignTargetPath) - The bundle to inscribe.

    [OUT]
    @(SignBundleEngine) - The bundle engine file to be signed.
  ================================================================================================
  -->
  <PropertyGroup>
    <InscribeBundleEngineDependsOn>
      PrepareForBuild;
      ResolveWixExtensionReferences;
      CompileAndLink;
      InternalSignContainers
    </InscribeBundleEngineDependsOn>
  </PropertyGroup>
  <Target
      Name="InscribeBundleEngine"
      DependsOnTargets="$(InscribeBundleEngineDependsOn)"
      Inputs="@(SignTargetPath)"
      Outputs="$(IntermediateOutputPath)$(SignedFile)">

    <Insignia
        BundleFile="@(SignTargetPath)"
        OutputFile="$(IntermediateOutputPath)%(SignTargetPath.Filename)%(SignTargetPath.Extension)"
        ToolPath="$(WixToolPath)"
        NoLogo="$(InscribeNoLogo)"
        RunAsSeparateProcess="$(RunWixToolsOutOfProc)"
        SuppressAllWarnings="$(InscribeSuppressAllWarnings)"
        SuppressSpecificWarnings="$(InscribeSuppressSpecificWarnings)"
        TreatWarningsAsErrors="$(InscribeTreatWarningsAsErrors)"
        TreatSpecificWarningsAsErrors="$(InscribeTreatSpecificWarningsAsErrors)"
        VerboseOutput="$(InscribeVerboseOutput)"
        AdditionalOptions="$(InscribeAdditionalOptions)">
      <Output TaskParameter="Output" ItemName="SignBundleEngine" />
    </Insignia>

    <!-- Explicitly add output to FileWrites to ensure even when the target is up to date. -->
    <CreateItem Include="$(IntermediateOutputPath)%(SignTargetPath.Filename)%(SignTargetPath.Extension)">
      <Output TaskParameter="Include" ItemName="FileWrites" />
    </CreateItem>

  </Target>

  <!--
  ================================================================================================
  InscribeBundle

    To be called after signing the bundle engine to reattach the attached container.

    [IN]
    @(Inscribe) - The bundle to inscribe.

    [OUT]
    @(SignBundle) - The bundle engine file to be signed.
  ================================================================================================
  -->
  <PropertyGroup>
    <InscribeBundleDependsOn>
      PrepareForBuild;
      ResolveWixExtensionReferences;
      CompileAndLink;
      InternalSignBundleEngine
    </InscribeBundleDependsOn>
  </PropertyGroup>
  <Target
      Name="InscribeBundle"
      DependsOnTargets="$(InscribeBundleDependsOn)"
      Inputs="@(SignTargetPath)"
      Outputs="$(IntermediateOutputPath)$(SignedFile)">

    <Insignia
        BundleFile="@(SignBundleEngine)"
        OriginalBundleFile="@(SignTargetPath)"
        OutputFile="@(SignTargetPath)"
        ToolPath="$(WixToolPath)"
        NoLogo="$(InscribeNoLogo)"
        RunAsSeparateProcess="$(RunWixToolsOutOfProc)"
        SuppressAllWarnings="$(InscribeSuppressAllWarnings)"
        SuppressSpecificWarnings="$(InscribeSuppressSpecificWarnings)"
        TreatWarningsAsErrors="$(InscribeTreatWarningsAsErrors)"
        TreatSpecificWarningsAsErrors="$(InscribeTreatSpecificWarningsAsErrors)"
        VerboseOutput="$(InscribeVerboseOutput)"
        AdditionalOptions="$(InscribeAdditionalOptions)">
      <Output TaskParameter="Output" ItemName="SignBundle" />
      <Output TaskParameter="Output" ItemName="FileWrites" />
    </Insignia>
  </Target>

  <!--
  ================================================================================================
  Lib

    Links the .wixobj, .wxl, .wixlib, wix extensions into a .wixlib file using lit.exe.

    [IN]
    @(CompileObjOutput) - The compiled .wixobj file.
    @(EmbeddedResource) - The list of wxl files to use for localization.
    @(WixObject) - The list of .wixobj files.
    @(WixLibrary) - The list of .wixlib files.
    @(WixExtension) - The list of wix dll extension files.

    [OUT]
    $(TargetPath) - The compiled .wixlib file.
  ================================================================================================
  -->
  <PropertyGroup>
    <LibDependsOn>
      PrepareForBuild;
      ResolveWixExtensionReferences
    </LibDependsOn>
  </PropertyGroup>
  <Target
    Name="Lib"
    Inputs="@(CompileObjOutput);
            @(EmbeddedResource);
            @(WixObject);
            @(WixLibrary);
            @(_ResolvedWixExtensionPaths);
            $(MSBuildAllProjects)"
    Outputs="$(TargetPath)"
    DependsOnTargets="$(LibDependsOn)"
    Condition=" '$(OutputType)' == 'Library' ">

    <Lit
      ObjectFiles="@(CompileObjOutput);@(WixObject);@(WixLibProjects);@(WixLibrary)"
      AdditionalOptions="$(LibAdditionalOptions)" 
      BindInputPaths="@(LinkerBindInputPaths)"
      BindFiles="$(LibBindFiles)"
      ExtensionDirectory="$(WixExtDir)"
      Extensions="@(_ResolvedWixExtensionPaths)"
      LocalizationFiles="@(EmbeddedResource)"
      NoLogo="$(LibNoLogo)"
      OutputFile="$(TargetPath)"
      Pedantic="$(LibPedantic)"
      ReferencePaths="$(ReferencePaths)"
      RunAsSeparateProcess="$(RunWixToolsOutOfProc)"
      SuppressAllWarnings="$(LibSuppressAllWarnings)"
      SuppressIntermediateFileVersionMatching="$(LibSuppressIntermediateFileVersionMatching)"
      SuppressSchemaValidation="$(LibSuppressSchemaValidation)"
      SuppressSpecificWarnings="$(LibSuppressSpecificWarnings)"
      ToolPath="$(WixToolPath)"
      TreatWarningsAsErrors="$(LibTreatWarningsAsErrors)"
      VerboseOutput="$(LibVerboseOutput)" />
  </Target>

  <!--
  ================================================================================================
  AssignCultures

    Determines the final list of culture groups to build based on either the Cultures property or
    those specified in .wxl files. 
    
      Culture groups specified in the Cultures property must be specified as a semi-colon 
      delimited  list of groups, with comma-delimited cultures within a group.  
      For example:
        <Cultures>en-US,en;en-GB,en</Cultures>
      This will build 2 targets, outputing to en-US and en-GB sub-folders.  Light will first look
      for strings in the first culture (en-US or en-GB) then the second (en).
    
      Cultures of .wxl files will be used when the Culture property is not set.  The culture of a 
      .wxl file is determined by the Culture attribute in the WixLocalization element in the file

    Sets the OutputFolder metadata on each culture group.  In most cases this is the same as the 
    first culture in the culture group.  When the Culture's property is unspecified and no .wxl 
    files are provided this is the same as the output directory.  When the Culture's property 
    specifies a single culture group and no .wxl files are provided this is the same as the output
    directory.

    Updates the TargetPath and TargetPdbPath properties to be used in subsequent targets.
    
    [IN]
    @(EmbeddedResource) - The list of wxl files to use for localization.
    $(Cultures) - The list of culture groups to build.

    [OUT]
    @(CultureGroup) - The list of culture group strings with OutputFolder metadata
    $(TargetPath) - Property list of target link output MSIs/MSMs
    $(TargetPdbPath) - Property list of target output pdbs
    
  ================================================================================================
  -->
  <Target 
    Name="AssignCultures"
    Condition=" ('$(OutputType)' == 'Package' or '$(OutputType)' == 'PatchCreation' or '$(OutputType)' == 'Module')">
    
    <WixAssignCulture
      Cultures="$(Cultures)"
      Files="@(EmbeddedResource)"
      >

      <Output TaskParameter="CultureGroups" ItemName="CultureGroup" />
    </WixAssignCulture>

    <!-- Build an itemgroup of outputs -->
    <CreateItem
      Include="$(TargetDir)%(CultureGroup.OutputFolder)$(TargetName)$(TargetExt)">
      <Output TaskParameter="Include"
              ItemName="_TargetPathItems"/>
    </CreateItem>
    
    <!-- Convert the itemgroup to a semicolon-delimited property -->
    <CreateProperty
      Value="@(_TargetPathItems)">
      <Output TaskParameter="Value"
              PropertyName="TargetPath"/>
    </CreateProperty>

    <!-- Build an itemgroup of PDB outputs -->
    <CreateItem
      Include="$(TargetPdbDir)%(CultureGroup.OutputFolder)$(TargetPdbName)">
      <Output TaskParameter="Include"
              ItemName="_TargetPdbPathItems"/>
    </CreateItem>

    <!-- Convert the itemgroup to a semicolon-delimited property -->
    <CreateProperty
      Value="@(_TargetPdbPathItems)">
      <Output TaskParameter="Value"
              PropertyName="TargetPdbPath"/>
    </CreateProperty>

    <!-- Set the sign target items, if we're signing output. -->
    <CreateItem
      Include="@(_TargetPathItems)"
      Condition=" '$(SignOutput)' == 'true' AND '$(SuppressLayout)' != 'true' ">
      <Output TaskParameter="Include"
              ItemName="SignTargetPath"/>
    </CreateItem>
  </Target>

  <!--
  ================================================================================================
  ReadPreviousBindInputsAndBuiltOutputs

    Reads a previous build's Bind contents and built outputs file into @(_BindInputs) and
    @(_BindBuiltOutputs) respectively.

    Note: Only the *built* outputs are used because using files copied to output folder
          can cause perpetual incremental build.

          Imagine the case where you have: Msi.wixproj -> Lib.wixproj -> Exe.csproj. The
          Exe.csproj cannot be both an input to Lib.wixproj and an output of Msi.wixproj
          (as an uncompressed file) because the Lib.wixproj will always newer than the
          Exe.csproj.

    [IN]

    [OUT]
    @(_BindInputs) - the content files required to bind (i.e. the Binary/@SourceFile and File/@Source files).
    @(_BindBuiltOutputs) - the previously built .msi, .msm, .pcp, .exe .wixpdb, .cabs, etc.
                           Does not include content copied to output folder.
  ================================================================================================
  -->
  <Target
    Name="ReadPreviousBindInputsAndBuiltOutputs"
    Condition=" ('$(OutputType)' == 'Bundle' or '$(OutputType)' == 'Package' or '$(OutputType)' == 'PatchCreation' or '$(OutputType)' == 'Module')">

    <ReadLinesFromFile File="$(IntermediateOutputPath)$(BindContentsFilePrefix)%(CultureGroup.Identity)$(BindContentsFileExtension)">
      <Output TaskParameter="Lines" ItemName="_BindInputs" />
    </ReadLinesFromFile>

    <ReadLinesFromFile File="$(IntermediateOutputPath)$(BindBuiltOutputsFilePrefix)%(CultureGroup.Identity)$(BindBuiltOutputsFileExtension)">
      <Output TaskParameter="Lines" ItemName="_BindBuiltOutputs" />
    </ReadLinesFromFile>

    <Message Importance="low" Text="Previous bind inputs: @(_BindInputs)" />
    <Message Importance="low" Text="Previous bind outputs: @(_BindBuiltOutputs)" />
  </Target>

  <!--
  ================================================================================================
  Link

    Links the .wixobj, .wxl, .wixlib, wix extensions into an .msi or .msm file using light.exe,
    once per culture group. All WXL files are passed into light and the culture switch determines
    which are used

    [IN]
    @(CompileObjOutput) - The compiled .wixobj file.
    @(CultureGroup) - The cultures to build
    @(EmbeddedResource) - The list of wxl files to use for localization.
    @(WixObject) - The list of .wixobj files.
    @(WixLibrary) - The list of .wixlib files.
    @(WixExtension) - The list of wix dll extension files.

    [OUT]
    $(TargetDir)\%(Culture)\$(TargetName)$(TargetExt) - The compiled .msi, .msm, or .exe files.
  ================================================================================================
  -->
  <PropertyGroup>
    <LinkDependsOn>
      PrepareForBuild;
      ResolveReferences;
      AssignCultures;
      ReadPreviousBindInputsAndBuiltOutputs;
    </LinkDependsOn>
  </PropertyGroup>
  
  <Target
    Name="Link"
    Inputs="@(CompileObjOutput);
            @(EmbeddedResource);
            @(WixObject);
            @(_ResolvedProjectReferencePaths);
            @(_ResolvedWixLibraryPaths);
            @(_ResolvedWixExtensionPaths);
            $(MSBuildAllProjects);
            @(_BindInputs)"
    Outputs="$(IntermediateOutputPath)$(BindBuiltOutputsFilePrefix)%(CultureGroup.Identity)$(BindBuiltOutputsFileExtension);@(_BindBuiltOutputs)"
    DependsOnTargets="$(LinkDependsOn)"
    Condition=" ('$(OutputType)' == 'Package' or '$(OutputType)' == 'PatchCreation' or '$(OutputType)' == 'Module' or '$(OutputType)' == 'Bundle')">

    <CreateProperty Value="$(TargetPdbDir)%(CultureGroup.OutputFolder)$(TargetPdbName)">
      <Output TaskParameter="Value" PropertyName="PdbOutputFile" />
    </CreateProperty>

    <!-- Call light using the culture subdirectory for output -->
    <Light
      ObjectFiles="@(CompileObjOutput);@(WixObject);@(WixLibProjects);@(_ResolvedWixLibraryPaths)"
      AdditionalOptions="$(LinkerAdditionalOptions)" 
      AllowIdenticalRows="$(AllowIdenticalRows)"
      AllowUnresolvedReferences="$(AllowUnresolvedReferences)"
      AdditionalCub="$(AdditionalCub)" 
      BackwardsCompatibleGuidGeneration="$(BackwardsCompatibleGuidGeneration)" 
      BindInputPaths="@(LinkerBindInputPaths)"
      BindFiles="$(LinkerBindFiles)"
      BindContentsFile="$(IntermediateOutputPath)$(BindContentsFilePrefix)%(CultureGroup.Identity)$(BindContentsFileExtension)"
      BindOutputsFile="$(IntermediateOutputPath)$(BindOutputsFilePrefix)%(CultureGroup.Identity)$(BindOutputsFileExtension)"
      BindBuiltOutputsFile="$(IntermediateOutputPath)$(BindBuiltOutputsFilePrefix)%(CultureGroup.Identity)$(BindBuiltOutputsFileExtension)"
      CabinetCachePath="$(CabinetCachePath)"
      CabinetCreationThreadCount="$(CabinetCreationThreadCount)"
      Cultures="%(CultureGroup.Identity)"
      CustomBinder="$(CustomBinder)"
      DefaultCompressionLevel="$(DefaultCompressionLevel)"
      DropUnrealTables="$(DropUnrealTables)"
      ExactAssemblyVersions="$(ExactAssemblyVersions)"
      ExtensionDirectory="$(WixExtDir)"
      Extensions="@(_ResolvedWixExtensionPaths)"
      Ices="$(Ices)"
      LeaveTemporaryFiles="$(LeaveTemporaryFiles)"
      LocalizationFiles="@(EmbeddedResource)"
      NoLogo="$(LinkerNoLogo)"
      OutputAsXml="$(OutputAsXml)"
      OutputFile="$(TargetDir)%(CultureGroup.OutputFolder)$(TargetName)$(TargetExt)"
      PdbOutputFile="$(PdbOutputFile)"
      Pedantic="$(LinkerPedantic)"
      ReferencePaths="$(ReferencePaths)"
      ReuseCabinetCache="$(ReuseCabinetCache)"
      RunAsSeparateProcess="$(RunWixToolsOutOfProc)"
      SetMsiAssemblyNameFileVersion="$(SetMsiAssemblyNameFileVersion)"
      SuppressAclReset="$(SuppressAclReset)"
      SuppressAllWarnings="$(LinkerSuppressAllWarnings)"
      SuppressAssemblies="$(SuppressAssemblies)"
      SuppressDefaultAdminSequenceActions="$(SuppressDefaultAdminSequenceActions)"
      SuppressDefaultAdvSequenceActions="$(SuppressDefaultAdvSequenceActions)"
      SuppressDefaultUISequenceActions="$(SuppressDefaultUISequenceActions)"
      SuppressFileHashAndInfo="$(SuppressFileHashAndInfo)"
      SuppressFiles="$(SuppressFiles)"
      SuppressIntermediateFileVersionMatching="$(LinkerSuppressIntermediateFileVersionMatching)"
      SuppressIces="$(SuppressIces)"
      SuppressLayout="$(SuppressLayout)"
      SuppressLocalization="$(SuppressLocalization)"
      SuppressMsiAssemblyTableProcessing="$(SuppressMsiAssemblyTableProcessing)"
      SuppressPdbOutput="$(SuppressPdbOutput)"
      SuppressSchemaValidation="$(LinkerSuppressSchemaValidation)"
      SuppressValidation="$(SuppressValidation)"
      SuppressSpecificWarnings="$(LinkerSuppressSpecificWarnings)"
      SuppressTagSectionIdAttributeOnTuples="$(SuppressTagSectionIdAttributeOnTuples)"
      ToolPath="$(WixToolPath)"
      TreatWarningsAsErrors="$(LinkerTreatWarningsAsErrors)"
      UnreferencedSymbolsFile="$(UnreferencedSymbolsFile)"
      VerboseOutput="$(LinkerVerboseOutput)"
      WixProjectFile="$(ProjectPath)"
      WixVariables="$(WixVariables)" />
  </Target>

  <!--
  ================================================================================================
  UpdateLinkFileWrites

    Reads the bind outputs file(s) output generated during Link to correctly set the @(FileWrites)
    item. Most targets have it easy because they can do a static mapping from inputs to the outputs.
    However, the Link target outputs are determined after a rather complex calculation we call
    linking and binding!

    This is an "after target" of Link to ensure it always runs, even if Link was up to date. It
    reads the outputs file generated during the Link target.

    [IN]
    Path to bind outputs file(s).

    [OUT]
    @(FileWrites) updated with outputs from bind.
  ================================================================================================
  -->
  <Target
    Name="UpdateLinkFileWrites"
    Condition=" ('$(OutputType)' == 'Bundle' or '$(OutputType)' == 'Package' or '$(OutputType)' == 'PatchCreation' or '$(OutputType)' == 'Module' or '$(OutputType)' == 'Bundle')">

    <ReadLinesFromFile File="$(IntermediateOutputPath)$(BindOutputsFilePrefix)%(CultureGroup.Identity)$(BindOutputsFileExtension)">
      <Output TaskParameter="Lines" ItemName="FileWrites"/>
    </ReadLinesFromFile>

    <CreateItem Include="$(IntermediateOutputPath)$(BindContentsFilePrefix)%(CultureGroup.Identity)$(BindContentsFileExtension);$(IntermediateOutputPath)$(BindOutputsFilePrefix)%(CultureGroup.Identity)$(BindOutputsFileExtension);$(IntermediateOutputPath)$(BindBuiltOutputsFilePrefix)%(CultureGroup.Identity)$(BindBuiltOutputsFileExtension)">
      <Output TaskParameter="Include" ItemName="FileWrites" />
    </CreateItem>

    <Message Importance="low" Text="Build files after link: @(FileWrites)" />
  </Target>

  <!--
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  IncrementalClean Targets
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  -->

  <!--
  ==================================================================================================
  IncrementalClean

    Remove files that were produced in a prior build but weren't produced in the current build.
    The reason is that if, for example, the name of the .msi/.msm has changed we want to delete the
    old copy.

    Leave the Clean cache file containing only the files produced in the current build.
  ==================================================================================================
  -->
  <Target
    Name="IncrementalClean"
    DependsOnTargets="_CleanGetCurrentAndPriorFileWrites">

    <!-- Subtract list of files produced in this build from list of files produced in prior builds. -->
    <CreateItem Include="@(_CleanPriorFileWrites)" Exclude="@(_CleanCurrentFileWrites)">
      <Output TaskParameter="Include" ItemName="_CleanOrphanFileWrites" />
    </CreateItem>

    <!-- Find all files in the final output directory. -->
    <FindUnderPath Path="$(OutDir)" Files="@(_CleanOrphanFileWrites)">
      <Output TaskParameter="InPath" ItemName="_CleanOrphanFileWritesInOutput" />
    </FindUnderPath>

    <!-- Find all files in the intermediate output directory. -->
    <FindUnderPath Path="$(IntermediateOutputPath)" Files="@(_CleanOrphanFileWrites)">
      <Output TaskParameter="InPath" ItemName="_CleanOrphanFileWritesInIntermediate" />
    </FindUnderPath>

    <!-- Delete the orphaned files. -->
    <Delete
      Files="@(_CleanOrphanFileWritesInIntermediate);@(_CleanOrphanFileWritesInOutput)"
      TreatErrorsAsWarnings="true">

      <Output TaskParameter="DeletedFiles" ItemName="_CleanOrphanFilesDeleted" />
    </Delete>

    <!-- Create a list of everything that wasn't deleted. -->
    <CreateItem Include="@(_CleanPriorFileWrites);@(_CleanCurrentFileWrites)" Exclude="@(_CleanOrphanFilesDeleted)">
      <Output TaskParameter="Include" ItemName="_CleanRemainingFileWritesAfterIncrementalClean" />
    </CreateItem>

    <!-- Remove duplicates. -->
    <RemoveDuplicates Inputs="@(_CleanRemainingFileWritesAfterIncrementalClean)">
      <Output TaskParameter="Filtered" ItemName="_CleanUniqueRemainingFileWritesAfterIncrementalClean" />
    </RemoveDuplicates>

    <!-- Make sure the directory exists. -->
    <MakeDir Directories="$(IntermediateOutputPath)" />

    <!-- Write new list of current files back to disk, replacing the existing list.-->
    <WriteLinesToFile
      File="$(IntermediateOutputPath)$(CleanFile)"
      Lines="@(_CleanUniqueRemainingFileWritesAfterIncrementalClean)"
      Overwrite="true" />

  </Target>

  <!--
  ==================================================================================================
  _CleanGetCurrentAndPriorFileWrites

    Get the list of files built in a prior build and the current build.
  ==================================================================================================
  -->
  <Target
    Name="_CleanGetCurrentAndPriorFileWrites">

    <!-- Read the list of files produced by a prior build from disk. -->
    <ReadLinesFromFile File="$(IntermediateOutputPath)$(CleanFile)">
      <Output TaskParameter="Lines" ItemName="_CleanPriorFileWrites" />
    </ReadLinesFromFile>

    <!-- Find all files in the final output directory. -->
    <FindUnderPath Path="$(OutDir)" Files="@(FileWrites)">
      <Output TaskParameter="InPath" ItemName="_CleanCurrentFileWritesInOutput" />
    </FindUnderPath>

    <!-- Find all files in the intermediate output directory. -->
    <FindUnderPath Path="$(IntermediateOutputPath)" Files="@(FileWrites)">
      <Output TaskParameter="InPath" ItemName="_CleanCurrentFileWritesInIntermediate" />
    </FindUnderPath>

    <!-- Remove duplicates from files produced in this build. -->
    <RemoveDuplicates Inputs="@(_CleanCurrentFileWritesInOutput);@(_CleanCurrentFileWritesInIntermediate)">
      <Output TaskParameter="Filtered" ItemName="_CleanCurrentFileWrites" />
    </RemoveDuplicates>

  </Target>

  <!--
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  Clean Targets
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  -->

  <!--
  ==================================================================================================
  Clean

    Delete all intermediate and final build outputs.
  ==================================================================================================
  -->
  <PropertyGroup>
    <CleanDependsOn>
      BeforeClean;
      CleanReferencedProjects;
      CoreClean;
      AfterClean
    </CleanDependsOn>
  </PropertyGroup>
  <Target
    Name="Clean"
    DependsOnTargets="$(CleanDependsOn)" />

  <!--
  ==================================================================================================
  BeforeClean

    Redefine this target in your project in order to run tasks just before Clean.
  ==================================================================================================
  -->
  <Target Name="BeforeClean" />

  <!--
  ==================================================================================================
  AfterClean

    Redefine this target in your project in order to run tasks just after Clean.
  ==================================================================================================
  -->
  <Target Name="AfterClean" />

  <!--
  ==================================================================================================
  CleanReferencedProjects

    Call Clean target on all Referenced Projects.
  ==================================================================================================
  -->
  <Target
    Name="CleanReferencedProjects">

    <!-- TODO -->
    <!--
    When building the project directly from the command-line, clean those referenced projects that
    exist on disk. For IDE builds and command-line .SLN builds, the solution build manager takes
    care of this.
    -->
    <!--MSBuild
      Projects="@(_MSBuildProjectReferenceExistent)"
      Targets="Clean"
      Condition=" '$(BuildingInsideVisualStudio)' != 'true' and '$(BuildingSolutionFile)' != 'true' and '@(_MSBuildProjectReferenceExistent)' != '' " /-->

  </Target>

  <!--
  ==================================================================================================
  CoreClean

    Cleans all of the compile and link outputs as well as any intermediate files generated along
    the way.
  ==================================================================================================
  -->
  <PropertyGroup>
    <CoreCleanDependsOn></CoreCleanDependsOn>
  </PropertyGroup>
  <Target
    Name="CoreClean"
    DependsOnTargets="$(CoreCleanDependsOn)">

    <!-- Read in list of files that were written to disk in past builds. -->
    <ReadLinesFromFile File="$(IntermediateOutputPath)$(CleanFile)">
      <Output TaskParameter="Lines" ItemName="_CleanPriorFileWrites" />
    </ReadLinesFromFile>

    <!-- Find all files in the final output directory. -->
    <FindUnderPath Path="$(OutDir)" Files="@(_CleanPriorFileWrites)">
      <Output TaskParameter="InPath" ItemName="_CleanPriorFileWritesInOutput" />
    </FindUnderPath>

    <!-- Find all files in the intermediate output directory. -->
    <FindUnderPath Path="$(IntermediateOutputPath)" Files="@(_CleanPriorFileWrites)">
      <Output TaskParameter="InPath" ItemName="_CleanPriorFileWritesInIntermediate" />
    </FindUnderPath>

    <!-- Delete those files. -->
    <Delete Files="@(_CleanPriorFileWritesInOutput);@(_CleanPriorFileWritesInIntermediate)" TreatErrorsAsWarnings="true">
      <Output TaskParameter="DeletedFiles" ItemName="_CleanPriorFileWritesDeleted" />
    </Delete>

    <!-- Create a list of everything that wasn't deleted. -->
    <CreateItem Include="@(_CleanPriorFileWrites)" Exclude="@(_CleanPriorFileWritesDeleted)">
      <Output TaskParameter="Include" ItemName="_CleanRemainingFileWritesAfterClean" />
    </CreateItem>

    <!-- Remove duplicates. -->
    <RemoveDuplicates Inputs="@(_CleanRemainingFileWritesAfterClean)">
      <Output TaskParameter="Filtered" ItemName="_CleanUniqueRemainingFileWrites" />
    </RemoveDuplicates>

    <!-- Make sure the directory exists. -->
    <MakeDir Directories="$(IntermediateOutputPath)" />

    <!-- Write new list of current files back to disk. -->
    <WriteLinesToFile File="$(IntermediateOutputPath)$(CleanFile)" Lines="@(_CleanUniqueRemainingFileWrites)" Overwrite="true" />

  </Target>

  <!--
  ==================================================================================================
  _CleanRecordFileWrites

    Save the list of all files written to disk so that it can be used for "Clean" later.
    Files written in prior builds are not removed from Clean cache.
  ==================================================================================================
  -->
  <Target
    Name="_CleanRecordFileWrites"
    DependsOnTargets="_CleanGetCurrentAndPriorFileWrites">

    <!-- Merge list of files from prior builds with the current build and then remove duplicates. -->
    <RemoveDuplicates Inputs="@(_CleanPriorFileWrites);@(_CleanCurrentFileWrites)">
      <Output TaskParameter="Filtered" ItemName="_CleanUniqueFileWrites" />
    </RemoveDuplicates>

    <!-- Make sure the directory exists. -->
    <MakeDir Directories="$(IntermediateOutputPath)" />

    <!-- Write merged file list back to disk, replacing existing contents. -->
    <WriteLinesToFile
        File="$(IntermediateOutputPath)$(CleanFile)"
        Lines="@(_CleanUniqueFileWrites)"
        Overwrite="true" />

  </Target>

  <!--
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  PostBuildEvent Targets
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  -->

  <!--
  ==================================================================================================
  PostBuildEvent

    Run the post-build event. This step is driven by two parameters:

    1) $(RunPostBuildEvent) is set by the user through the IDE and can be one of four values:
       1) OnBuildSuccess: In this case, every step of the build must succeed for the post-build
          step to run.
       2) <Blank>: This is the same as OnBuildSuccess.
       3) OnOutputUpdated: In this case, the post-build step will run only if the main output was
          actually updated.
       4) Always: The post-build step is always run.

    2) $(_TargetOutputTimestampBeforeCompileAndLink) and $(_TargetOutputTimestampAfterCompileAndLink)
       are set by the _TimeStampBeforeCompileAndLink and _TimeStampAfterCompileAndLink targets. If
       the output was actually rebuilt during this build, then the two values will be different.
  ==================================================================================================
  -->
  <PropertyGroup>
    <PostBuildEventDependsOn>GetTargetPath</PostBuildEventDependsOn>
  </PropertyGroup>
  <Target
    Name="PostBuildEvent"
    Condition=" '$(PostBuildEvent)' != '' and
      ( '$(RunPostBuildEvent)' != 'OnOutputUpdated' or '$(_TargetOutputTimestampBeforeCompileAndLink)' != '$(_TargetOutputTimestampAfterCompileAndLink)' )"
    DependsOnTargets="$(PostBuildEventDependsOn)">

    <ReplaceString
      Text="$(PostBuildEvent)"
      OldValue="!(TargetPath)"
      NewValue="$(TargetPath)">
      
      <Output TaskParameter="Text" PropertyName="ExpandedPostBuildEvent" />
    </ReplaceString>

    <ReplaceString
      Text="$(ExpandedPostBuildEvent)"
      OldValue="!(TargetPdbPath)"
      NewValue="$(TargetPdbPath)">
      
      <Output TaskParameter="Text" PropertyName="ExpandedPostBuildEvent" />
    </ReplaceString>

    <Exec WorkingDirectory="$(OutDir)" Command="$(ExpandedPostBuildEvent)" />
  </Target>

  <!--
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  AllProjectOutputGroups Section
  //////////////////////////////////////////////////////////////////////////////////////////////////
  //////////////////////////////////////////////////////////////////////////////////////////////////
  -->

  <!--
  ==================================================================================================
  AllProjectOutputGroups

    The targets below drive output groups, which provide generic information about a
    project's inputs (e.g., content files, compilation sources, etc.) and built outputs
    (e.g., built EXE/DLL, PDB, XML documentation files, etc.)

    Each target may produce two kinds of items:  outputs and dependencies. Outputs are
    items from the current project; dependencies are items that are brought into the
    current project as a result of referencing other projects or components.

    For both outputs and dependencies, the Include attribute
    specifies the location of the output/dependency; it must be a full path. Any number
    of additional attributes may be placed on an output/dependency item.
  ==================================================================================================
  -->
  <Target
    Name="AllProjectOutputGroups"
    DependsOnTargets="
      BuiltProjectOutputGroup;
      DebugSymbolsProjectOutputGroup;
      DocumentationProjectOutputGroup;
      SatelliteDllsProjectOutputGroup;
      SourceFilesProjectOutputGroup;
      ContentFilesProjectOutputGroup;
      SGenFilesOutputGroup" />

  <!-- 
  This is the key output for the BuiltProjectOutputGroup and is meant to be read directly from the IDE.
  Reading an item is faster than invoking a target.
  -->
  <ItemGroup>
    <BuiltProjectOutputGroupKeyOutput Include="$(TargetPath)">
      <IsKeyOutput>true</IsKeyOutput>
      <FinalOutputPath>$(TargetPath)</FinalOutputPath>
      <TargetPath>$(TargetFileName)</TargetPath>
    </BuiltProjectOutputGroupKeyOutput>
  </ItemGroup>

  <!--
  ==================================================================================================
  BuiltProjectOutputGroup
  ==================================================================================================
  -->
  <PropertyGroup>
    <BuiltProjectOutputGroupDependsOn>PrepareForBuild;AssignCultures</BuiltProjectOutputGroupDependsOn>
    <AddAppConfigToBuildOutputs Condition="('$(AddAppConfigToBuildOutputs)' == '') and ('$(OutputType)' != 'library')">true</AddAppConfigToBuildOutputs>
  </PropertyGroup>
  <Target
    Name="BuiltProjectOutputGroup"
    Outputs="@(BuiltProjectOutputGroupOutput)"
    DependsOnTargets="$(BuiltProjectOutputGroupDependsOn)">

    <!-- Don't add BuiltProjectOutputGroupKeyOutput - to avoid duplicates, we only want to get the updated list of TargetPaths from the TargetPath property below -->

    <!-- Convert intermediate items into final items; this way we can get the full path for each item -->
    <CreateItem Include="@(_BuiltProjectOutputGroupOutputIntermediate->'%(FullPath)')">
      <Output TaskParameter="Include" ItemName="BuiltProjectOutputGroupOutput" />
    </CreateItem>

    <!-- Include build output(s).  Different than predefined itemgroup since AssignCultures target may change it -->
    <CreateItem
      Include="$(TargetPath)">
      <Output TaskParameter="Include" ItemName="BuiltProjectOutputGroupOutput" />
    </CreateItem>

    <GetCabList Database="@(BuiltProjectOutputGroupKeyOutput)" Condition=" '$(OutputType)' == 'Package' ">
      <Output TaskParameter="CabList" ItemName="BuiltProjectOutputGroupOutput" />
    </GetCabList>

    <GetLooseFileList Database="@(BuiltProjectOutputGroupKeyOutput)" Condition=" '$(OutputType)' == 'Package' ">
      <Output TaskParameter="LooseFileList" ItemName="BuiltProjectOutputGroupOutput" />
    </GetLooseFileList>
  </Target>

  <!--
  ==================================================================================================
  DebugSymbolsProjectOutputGroup

    Populates the Debug Symbols project output group.
  ==================================================================================================
  -->
  <PropertyGroup>
    <DebugSymbolsProjectOutputGroupDependsOn>AssignCultures</DebugSymbolsProjectOutputGroupDependsOn>
  </PropertyGroup>
  <Target
    Name="DebugSymbolsProjectOutputGroup"
    Outputs="@(DebugSymbolsProjectOutputGroupOutput)"
    DependsOnTargets="$(DebugSymbolsProjectOutputGroupDependsOn)">

    <!-- Include build output pdb(s).  Different than predefined itemgroup since AssignCultures target may change -->
    <CreateItem
      Include="$(TargetPdbPath)"
      Condition=" '$(SuppressPdbOutput)' != 'true' ">
      <Output TaskParameter="Include" ItemName="DebugSymbolsProjectOutputGroupOutput" />
    </CreateItem>
  </Target>

  <!--
  ==================================================================================================
  DocumentationProjectOutputGroup

    Populates the Documentation project output group.
  ==================================================================================================
  -->
  <PropertyGroup>
    <DocumentationProjectOutputGroupDependsOn></DocumentationProjectOutputGroupDependsOn>
  </PropertyGroup>
  <Target
    Name="DocumentationProjectOutputGroup"
    Outputs="@(DocumentationProjectOutputGroupOutput)"
    DependsOnTargets="$(DocumentationProjectOutputGroupDependsOn)" />

  <!--
  ==================================================================================================
  SatelliteDllsProjectOutputGroup

    Populates the Satellite Files project output group.
  ==================================================================================================
  -->
  <PropertyGroup>
    <SatelliteDllsProjectOutputGroupDependsOn>PrepareForBuild</SatelliteDllsProjectOutputGroupDependsOn>
  </PropertyGroup>
  <Target
    Name="SatelliteDllsProjectOutputGroup"
    Outputs="@(SatelliteDllsProjectOutputGroupOutput)"
    DependsOnTargets="$(SatelliteDllsProjectOutputGroupDependsOn)" />

  <!--
  ==================================================================================================
  SourceFilesProjectOutputGroup

    Populates the Source Files project output group.
    Source files are items in the project whose type is "Compile" and "EmbeddedResource".
  ==================================================================================================
  -->
  <PropertyGroup>
    <SourceFilesProjectOutputGroupDependsOn>PrepareForBuild</SourceFilesProjectOutputGroupDependsOn>
  </PropertyGroup>
  <Target
    Name="SourceFilesProjectOutputGroup"
    Outputs="@(SourceFilesProjectOutputGroupOutput)"
    DependsOnTargets="$(SourceFilesProjectOutputGroupDependsOn)">

    <AssignTargetPath Files="@(Compile)" RootFolder="$(MSBuildProjectDirectory)">
      <Output TaskParameter="AssignedFiles" ItemName="_CompileWithTargetPath"  />
    </AssignTargetPath>

    <AssignTargetPath Files="@(EmbeddedResource)" RootFolder="$(MSBuildProjectDirectory)">
      <Output TaskParameter="AssignedFiles" ItemName="_EmbeddedResourceWithTargetPath" />
    </AssignTargetPath>

    <!-- First we deal with Compile and EmbeddedResource -->
    <CreateItem Include="@(_CompileWithTargetPath->'%(FullPath)');@(_EmbeddedResourceWithTargetPath->'%(FullPath)')">
      <Output TaskParameter="Include" ItemName="SourceFilesProjectOutputGroupOutput" />
    </CreateItem>

    <!-- Include the project file -->
    <CreateItem Include="$(MSBuildProjectFullPath)" AdditionalMetadata="TargetPath=$(ProjectFileName)">
      <Output TaskParameter="Include" ItemName="SourceFilesProjectOutputGroupOutput" />
    </CreateItem>

  </Target>

  <!--
  ==================================================================================================
  ContentFilesProjectOutputGroup

    Populates the Content Files project output group.
    Content files are items in the project whose type is "Content".
  ==================================================================================================
  -->
  <PropertyGroup>
    <ContentFilesProjectOutputGroupDependsOn>PrepareForBuild</ContentFilesProjectOutputGroupDependsOn>
  </PropertyGroup>
  <Target
    Name="ContentFilesProjectOutputGroup"
    Outputs="@(ContentFilesProjectOutputGroupOutput)"
    DependsOnTargets="$(ContentFilesProjectOutputGroupDependsOn)">

    <AssignTargetPath Files="@(Content)" RootFolder="$(MSBuildProjectDirectory)">
      <Output TaskParameter="AssignedFiles" ItemName="ContentWithTargetPath" />
    </AssignTargetPath>

    <!-- Convert items into final items; this way we can get the full path for each item. -->
    <CreateItem Include="@(ContentWithTargetPath->'%(FullPath)')">
      <Output TaskParameter="Include" ItemName="ContentFilesProjectOutputGroupOutput" />
    </CreateItem>

  </Target>

  <!--
  ==================================================================================================
  SGenFilesOutputGroup

    Populates the GenerateSerializationAssemblies Files project output group.
    GenerateSerializationAssemblies files are those generated by the GenerateSerializationAssemblies
    target and task.
  ==================================================================================================
  -->
  <PropertyGroup>
    <SGenFilesOutputGroupDependsOn></SGenFilesOutputGroupDependsOn>
  </PropertyGroup>
  <Target
    Name="SGenFilesOutputGroup"
    Outputs="@(SGenFilesOutputGroupOutput)"
    DependsOnTargets="$(SGenFilesOutputGroupDependsOn)" />

  <!--
  ==================================================================================================
  GetNativeManifest & GetCopyToOutputDirectoryItems

    Some project types expect these targets to be defined when they take a project reference. They
    are normally defined in Microsoft.Common.targets but we don't include that targets so we define
    the targets here.
  ==================================================================================================
  -->
  <Target Name="GetNativeManifest"/>
  <Target Name="GetCopyToOutputDirectoryItems" />

  <!-- Extension point: Define CustomAfterWixTargets to a .targets file that you want to include after this file. -->
  <Import Project="$(CustomAfterWixTargets)" Condition=" '$(CustomAfterWixTargets)' != '' and Exists('$(CustomAfterWixTargets)')" />

  <!-- MSBuildToolsVersion is set for MSBuild 3.5 and later, which is a requirement for lux.targets. -->
  <Import Project="$(LuxTargetsPath)" Condition=" '$(MSBuildToolsVersion)' != '' and '$(LuxTargetsPath)' != '' and Exists('$(LuxTargetsPath)')" />
</Project>