Google Git Google Git
Sign in
third-party-mirror/linux-rdma/rdma-core/ffcb5072a2aeffe62dbc782c8431bd062eef78eb
commit
ffcb5072a2aeffe62dbc782c8431bd062eef78eb
[log]
author
Dezhen Lu <dezhen.lu@student.uni-tuebingen.de>
Sat Nov 07 21:41:33 2026 +0100
committer
0z5a <dezhen.lu@student.uni-tuebingen.de>
Mon Nov 09 13:00:12 2026 +0100
tree
4c05c17170fd0f9d4b5f49936a974691ff5da48a
parent
a70151dfec390eb5f7fc5b266f51d601da2a7778 [diff] 
libhns: Write all 64 bytes of a direct WQE explicitly

hns_roce_write512() passes sizeof(struct hns_roce_rc_sq_wqe), which is
32, to mmio_memcpy_x64(). It writes a 64-byte direct WQE only because
the aarch64 macro takes its 64-byte path for any constant length. On
the generic implementation a length of 32 makes the size_t counter
wrap, and the copy does not stop.

Pass the size of a direct WQE, 1 << HNS_ROCE_SQWQE_SHIFT. On aarch64
the generated code does not change.

Fixes: 159933c37450 ("libhns: Add support for direct wqe")
Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com>
Tested-by: Junxian Huang <huangjunxian6@hisilicon.com>
Assisted-by: Claude:claude-opus-5-5 <noreply@anthropic.com>
Signed-off-by: Dezhen Lu <dezhen.lu@student.uni-tuebingen.de>
1 file changed
tree: 4c05c17170fd0f9d4b5f49936a974691ff5da48a
  1. buildlib/
  2. ccan/
  3. debian/
  4. Documentation/
  5. ibacm/
  6. infiniband-diags/
  7. iwpmd/
  8. kernel-boot/
  9. kernel-headers/
  10. libibmad/
  11. libibnetdisc/
  12. libibumad/
  13. libibverbs/
  14. librdmacm/
  15. providers/
  16. pyverbs/
  17. rdma-ndd/
  18. redhat/
  19. srp_daemon/
  20. suse/
  21. tests/
  22. util/
  23. .clang-format
  24. .gitignore
  25. .mailmap
  26. build.sh
  27. CMakeLists.txt
  28. COPYING.BSD_FB
  29. COPYING.BSD_MIT
  30. COPYING.GPL2
  31. COPYING.md
  32. MAINTAINERS
  33. rdma-sysusers.conf
  34. README.md
README.md

Build Status

RDMA Core Userspace Libraries and Daemons

This is the userspace components for the Linux Kernel's drivers/infiniband subsystem. Specifically this contains the userspace libraries for the following device nodes:

  • /dev/infiniband/uverbsX (libibverbs)
  • /dev/infiniband/rdma_cm (librdmacm)
  • /dev/infiniband/umadX (libibumad)

The userspace component of the libibverbs RDMA kernel drivers are included under the providers/ directory. Support for the following Kernel RDMA drivers is included:

  • bnxt_re.ko
  • efa.ko
  • erdma.ko
  • iw_cxgb4.ko
  • hfi1.ko
  • hns-roce-hw-v2.ko
  • ionic_rdma.ko
  • irdma.ko
  • ib_qib.ko
  • mana_ib.ko
  • mlx4_ib.ko
  • mlx5_ib.ko
  • ib_mthca.ko
  • ocrdma.ko
  • qedr.ko
  • rdma_rxe.ko
  • siw.ko
  • vmw_pvrdma.ko

Additional service daemons are provided for:

  • srp_daemon (ib_srp.ko)
  • iwpmd (for iwarp kernel providers)
  • ibacm (for InfiniBand communication management assistant)

Building

This project uses a cmake based build system. Quick start:

$ bash build.sh

build/bin will contain the sample programs and build/lib will contain the shared libraries. The build is configured to run all the programs ‘in-place’ and cannot be installed.

Debian Derived

$ apt-get install build-essential cmake gcc libudev-dev libnl-3-dev libnl-route-3-dev ninja-build pkg-config valgrind python3-dev cython3 python3-docutils pandoc

Supported releases:

  • Debian 9 (stretch) or newer
  • Ubuntu 16.04 LTS (xenial) or newer

Fedora, CentOS 8

$ dnf builddep redhat/rdma-core.spec

NOTE: Fedora Core uses the name ‘ninja-build’ for the ‘ninja’ command.

openSUSE

$ zypper install cmake gcc libnl3-devel libudev-devel ninja pkg-config valgrind-devel python3-devel python3-Cython python3-docutils pandoc

Building on CentOS 7, Amazon Linux 2

Install required packages:

$ yum install cmake gcc libnl3-devel libudev-devel make pkgconfig valgrind-devel

Developers on CentOS 7 or Amazon Linux 2 are suggested to install more modern tooling for the best experience.

CentOS 7:

$ yum install epel-release
$ yum install cmake3 ninja-build pandoc

Amazon Linux 2:

$ amazon-linux-extras install epel
$ yum install cmake3 ninja-build pandoc

NOTE: EPEL uses the name ‘ninja-build’ for the ‘ninja’ command, and ‘cmake3’ for the ‘cmake’ command.

Usage

To set up software RDMA on an existing interface with either of the available drivers, use the following commands, substituting <DRIVER> with the name of the driver of your choice (rdma_rxe or siw) and <TYPE> with the type corresponding to the driver (rxe or siw).

# modprobe <DRIVER>
# rdma link add <NAME> type <TYPE> netdev <DEVICE>

Please note that you need version of iproute2 recent enough is required for the command above to work.

You can use either ibv_devices or rdma link to verify that the device was successfully added.

Reporting bugs

Bugs should be reported to the linux-rdma@vger.kernel.org mailing list In your bug report, please include:

  • Information about your system:

    • Linux distribution and version
    • Linux kernel and version
    • InfiniBand hardware and firmware version
    • ... any other relevant information

  • How to reproduce the bug.

  • If the bug is a crash, the exact output printed out when the crash occurred, including any kernel messages produced.

Submitting patches

See Contributing to rdma-core.

Stable branches

Stable versions are released regularly with backported fixes (see Documentation/stable.md) The current minimum version still maintained is ‘v33.X’