| # Configure Soft-RoCE (RXE): | |
| Create RXE device over network interface (e.g. eth0): | |
| # rdma link add rxe_eth0 type rxe netdev eth0 | |
| Use the status command to display the current configuration: | |
| # rdma link | |
| If you are using a Mellanox HCA, make sure that the mlx4_ib/mlx5_ib kernel | |
| module is not loaded (modprobe –rv mlx4_ib) in the soft-RoCE machine. Now you | |
| have an Infiniband device called “rxe0_eth0” that can be used to run any RoCE | |
| app. |