* Patch by Martin Winistoerfer, 23 Mar 2003
- Add port to MPC555/556 microcontrollers
- Add support for cmi customer board with
Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
* Patch by Rick Bronson, 28 Mar 2003:
- fix common/cmd_nand.c
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index 1986c22..954e937 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -28,6 +28,8 @@
#include <mpc8xx.h>
#elif defined (CONFIG_405GP)
#include <asm/processor.h>
+#elif defined (CONFIG_5xx)
+#include <mpc5xx.h>
#endif
#if (CONFIG_COMMANDS & CFG_CMD_REGINFO)
@@ -172,9 +174,42 @@
mtdcr(ebccfga,pb7ap); printf ("%08x ", mfdcr(ebccfgd));
printf ("\n\n");
-#endif /*(CONFIG_405GP)*/
+#elif defined(CONFIG_5xx)
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl5xx_t *memctl = &immap->im_memctl;
+ volatile sysconf5xx_t *sysconf = &immap->im_siu_conf;
+ volatile sit5xx_t *timers = &immap->im_sit;
+ volatile car5xx_t *car = &immap->im_clkrst;
+ volatile uimb5xx_t *uimb = &immap->im_uimb;
+
+ printf("\nSystem Configuration registers\n");
+ printf("\tIMMR\t0x%08X\tSIUMCR\t0x%08X \n", get_immr(0), sysconf->sc_siumcr);
+ printf("\tSYPCR\t0x%08X\tSWSR\t0x%04X \n" ,sysconf->sc_sypcr, sysconf->sc_swsr);
+ printf("\tSIPEND\t0x%08X\tSIMASK\t0x%08X \n", sysconf->sc_sipend, sysconf->sc_simask);
+ printf("\tSIEL\t0x%08X\tSIVEC\t0x%08X \n", sysconf->sc_siel, sysconf->sc_sivec);
+ printf("\tTESR\t0x%08X\n", sysconf->sc_tesr);
+
+ printf("\nMemory Controller Registers\n");
+ printf("\tBR0\t0x%08X\tOR0\t0x%08X \n", memctl->memc_br0, memctl->memc_or0);
+ printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", memctl->memc_br1, memctl->memc_or1);
+ printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", memctl->memc_br2, memctl->memc_or2);
+ printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", memctl->memc_br3, memctl->memc_or3);
+ printf("\tDMBR\t0x%08X\tDMOR\t0x%08X \n", memctl->memc_dmbr, memctl->memc_dmor );
+ printf("\tMSTAT\t0x%08X\n", memctl->memc_mstat);
+
+ printf("\nSystem Integration Timers\n");
+ printf("\tTBSCR\t0x%08X\tRTCSC\t0x%08X \n", timers->sit_tbscr, timers->sit_rtcsc);
+ printf("\tPISCR\t0x%08X \n", timers->sit_piscr);
+
+ printf("\nClocks and Reset\n");
+ printf("\tSCCR\t0x%08X\tPLPRCR\t0x%08X \n", car->car_sccr, car->car_plprcr);
+
+ printf("\nU-Bus to IMB3 Bus Interface\n");
+ printf("\tUMCR\t0x%08X\tUIPEND\t0x%08X \n", uimb->uimb_umcr, uimb->uimb_uipend);
+ printf ("\n\n");
+#endif /* CONFIG_5xx */
return 0;
}
-#endif /* CONFIG_8xx && CFG_CMD_REGINFO */
+#endif /* CONFIG_COMMANDS & CFG_CMD_REGINFO */
