* Patch by Daniel Engström, 13 Nov 2002:
Add support for i386 architecture and AMD SC520 board
* Patch by Pierre Aubert, 12 Nov 2002:
Add support for DOS filesystem and booting from DOS floppy disk
diff --git a/lib_i386/pci_type1.c b/lib_i386/pci_type1.c
new file mode 100644
index 0000000..e5577e8
--- /dev/null
+++ b/lib_i386/pci_type1.c
@@ -0,0 +1,57 @@
+/*
+ * Support for type PCI configuration cycles.
+ * based on pci_indirect.c
+ *
+ * Copyright (C) 2002 Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_PCI
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#define cfg_read(val, addr, type, op) *val = op((type)(addr))
+#define cfg_write(val, addr, type, op) op((val), (type *)(addr))
+
+#define TYPE1_PCI_OP(rw, size, type, op, mask) \
+static int \
+type1_##rw##_config_##size(struct pci_controller *hose, \
+ pci_dev_t dev, int offset, type val) \
+{ \
+ outl(dev | (offset & 0xfc) | 0x80000000, hose->cfg_addr); \
+ cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
+ return 0; \
+}
+
+
+TYPE1_PCI_OP(read, byte, u8 *, inb, 3)
+TYPE1_PCI_OP(read, word, u16 *, inw, 2)
+TYPE1_PCI_OP(read, dword, u32 *, inl, 0)
+
+TYPE1_PCI_OP(write, byte, u8, outb, 3)
+TYPE1_PCI_OP(write, word, u16, outw, 2)
+TYPE1_PCI_OP(write, dword, u32, outl, 0)
+
+void pci_setup_type1(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
+{
+ pci_set_ops(hose,
+ type1_read_config_byte,
+ type1_read_config_word,
+ type1_read_config_dword,
+ type1_write_config_byte,
+ type1_write_config_word,
+ type1_write_config_dword);
+
+ hose->cfg_addr = (unsigned int *) cfg_addr;
+ hose->cfg_data = (unsigned char *) cfg_data;
+}
+
+#endif
