Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing
Conflicts:
common/cmd_bootm.c
cpu/mpc8xx/cpu.c
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
diff --git a/CHANGELOG b/CHANGELOG
index 6d0778c..1ad28d0 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,1059 @@
+commit 43ddd9c820fec44816188f53346b464e20b3142d
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Sat Mar 22 14:23:49 2008 -0400
+
+ Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
+
+ These defines embedded the u-boot env variables and/or the bd_t structure
+ in the fdt blob. The conclusion of discussion on the u-boot email list
+ was that embedding these in the fdt blob is not useful: there are better
+ ways of passing the data (in fact, the fdt blob itself replaces the
+ bd_t struct).
+
+ The only board that enables these is the stxxtc and they don't appear
+ to be used by linux.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 22ed2285743359fd1fe73e411dff914b2256e68f
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Mar 17 10:49:25 2008 +0100
+
+ rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Mar 17 08:54:06 2008 +0900
+
+ Add Flex-OneNAND booting support
+
+ Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
+ using a NOR Flash interface. This on-chip integration enables system designers
+ to reduce external system logic and use high-density NAND Flash
+ in applications that would otherwise have to use more NOR components.
+
+ Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
+ in more flexible way. While MLC area of Flex-OneNAND can be used to store data
+ that require low reliability and high density, SLC area of Flex-OneNAND
+ to store data that need high reliability and high performance. Flex-OneNAND
+ can let users take advantage of storing these two different types of data
+ into one chip, which is making Flex-OneNAND more cost- and space-effective.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit c512389cc4a10253249271ff6c887c6dab1f0db2
+Author: André Schwarz <andre.schwarz@matrix-vision.de>
+Date: Thu Mar 13 13:50:52 2008 +0100
+
+ MPC5200: support setup without FEC
+
+ Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
+ defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit aa3511e422946041ef626f80a05ae5e8bfc700e6
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 18:05:46 2008 -0600
+
+ FSL: Move board/mpc8266ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7f1d846e5c5754449c286587d099d85246062772
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 18:05:47 2008 -0600
+
+ FSL: Move board/mpc7448hpc2 under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 18:05:45 2008 -0600
+
+ FSL: Move board/mpc8260ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
+Author: goda.yusuke <goda.yusuke@renesas.com>
+Date: Wed Mar 5 17:08:33 2008 +0900
+
+ net: Add support AX88796L ethernet device
+
+ AX88796L is device of NE2000 compatible.
+ This patch support AX88796L ethernet device.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e0a6140dd381e1eed1ada2291166ef2616d8822b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 25 22:50:41 2008 +0100
+
+ ne2000 driver: change #ifdef to Makefile conditional compilation
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e710185aae90c64d39c2d453e40e58ceefe4f250
+Author: goda.yusuke <goda.yusuke@renesas.com>
+Date: Wed Mar 5 17:08:20 2008 +0900
+
+ net: Divided code of NE2000 ethernet driver
+
+ There are more devices of the NE2000 base.
+ A present code is difficult for us to support more devices.
+ To support more NE2000 clone devices, separated the function.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 395bce4f59a507a60a475f7ee46bed47de9482df
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 24 23:58:13 2008 -0500
+
+ net/Blackfin: move on-chip MAC driver into drivers/net/
+
+ The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
+ directory, but it is not board specific, so relocate it to the drivers dir
+ so that other Blackfin ports can utilize it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 24 23:52:35 2008 -0500
+
+ smc91111: use SSYNC() rather than asm(ssync) for Blackfin
+
+ Since the "ssync" instruction may have hardware anomalies associated with
+ it, have the smc91111 driver use the SSYNC macro rather than invoking it
+ directly. We workaround all the anomalies via this macro.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
+Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+Date: Sun Feb 17 22:57:47 2008 +0000
+
+ 8xx: Update OF support on 8xx
+
+ This patch does some shifting around of OF support on 8xx.
+
+ Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+
+commit 9c666a7db0b2285a270c68810889ce7d5dba304b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 15 15:16:18 2008 -0600
+
+ ppc: Allow boards to specify how much memory they can map
+
+ For historical reasons we limited the stack to 256M because some boards
+ could only map that much via BATS. However newer boards are capable of
+ mapping more memory (for example 85xx is capble of doing up to 2G).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
+Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+Date: Fri Feb 15 01:05:58 2008 +0000
+
+ 8xx : Add OF support to Adder875 board port - resubmit
+
+ Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+
+commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Feb 14 20:44:42 2008 -0600
+
+ Add setexpr command
+
+ Add a simple expr style command that will set an env variable as the result
+ of the command. This allows us to do simple math in shell. The following
+ operations are supported: &, |, ^, +, -, *, /.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3f105faa64b9826e088711fdfcaa70cb1230397a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 17:27:48 2008 -0600
+
+ FSL: Move board/mpc7448hpc2 under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 449c703374a8868453425e15da7e2f76221b72e4
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 17:21:43 2008 -0600
+
+ FSL: Move board/mpc8266ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5863577989ad689427bb750107e9a75f1c1645d2
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 16:41:41 2008 -0600
+
+ FSL: Move board/mpc8260ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8a773983957ee6c4aa344469b742f29c7d26afbd
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:08 2008 +0900
+
+ [MIPS] Move gth2_config from ARM section to MIPS
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Fix dcache_status()
+
+ You can't judge UNCACHED by Config.K0 LSB.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Introduce _machine_restart
+
+ Handles machine specific functions by using weak functions.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit decaba6f5cf386d569ac3997bebb871b966c6b18
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Cleanup CP0 Status initialization
+
+ Add setup_c0_status from Linux. For the moment we disable interrupts, set
+ CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
+ reset-time configuration and will work well across most processors.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Initialize CP0 Cause before setting up CP0 Status register
+
+ Without this change, we'll be suffering from deffered WATCH exception
+ once Status.EXL is cleared. Make sure Cause.WP is cleared.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 26138623230ca2bad3c78e05a65527ea70c8b688
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
+
+ Move things to appropriate place.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] Implement flush_cache()
+
+ We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
+ don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
+ function is used not only in U-Boot specfic programs but also at loading
+ target binaries.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] Fix I-/D-cache initialization loops
+
+ Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
+ again per a loop for I-cache initialization. But according to 'See MIPS
+ Run', we're encouraged to use three separate loops rather than combining
+ them *for both I- and D-cache*. This patch tries to fix this.
+
+ In accordance with fixing above, mips_init_[id]cache are separated from
+ mips_cache_reset(), and rewrite cache loops are completely rewritten with
+ useful macros.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 1898840797c7f50799377bd5b285a8a93a82c419
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] Replace memory clearance code with f_fill64
+
+ This routine fills memory with zero by 64 bytes, and is 64-bit capable.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
+
+ This patch replaces the current function definitions with NESTED, LEAF
+ and END macro. They specify some more additional information about the
+ function; an alignment of symbol, type of symbol, stack frame usage, etc.
+ These information explicitly tells the assembler and the debugger about
+ the types of code we want to generate.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 282223a607c611425fa33f5428f8eae6636972bb
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 11:43:17 2008 +0900
+
+ [MIPS] asm headers' updates
+
+ Make some asm headers adjusted to the latest Linux kernel.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 11:39:29 2008 +0900
+
+ [MIPS] Request for the 'mips_cache_lock()' removal
+
+ The initial intension of having mips_cache_lock() was to use the cache
+ as memory for temporary stack use so that a C environment can be set up
+ as early as possible.
+
+ But now mips_cache_lock() follow lowlevel_init(). We've already have the
+ real memory initilaized at this point, therefore we could/should use it.
+ No reason to lock at all.
+
+ Other problems:
+
+ Cache locking is not consistent across MIPS implementaions. Some imple-
+ mentations don't support locking at all. The style of locking varies -
+ some support per line locking, others per way, etc. Some parts use bits
+ in status registers instead of cache ops. Current mips_cache_lock() is
+ not necessarily general-purpose.
+
+ And this is worthy of special mention; once U-Boot/MIPS locks the lines,
+ they are never get unlocked, so the code relies on whatever gets loaded
+ after U-Boot to re-initialize the cache and clear the locks. We're sup-
+ posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
+ but leave the situation as it is for a long time.
+
+ For these reasons, I proposed the removal of mips_cache_lock() from the
+ global start-up code.
+
+ This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
+ *things have changed*. If he wants the same behavior as before, he needs
+ to have CFG_INIT_RAM_LOCK_MIPS in his config file.
+
+ If we don't have any regression report through several releases, then
+ we'll remove codes entirely.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Acked-by: Andrew Dyer <amdyer@gmail.com>
+
+commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 24 11:30:54 2008 +0100
+
+ lwmon5 SYSMON POST: fix backlight control
+
+ If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
+ run on the board, then the SYSMON POST controls the display backlight
+ (doesn't switch backlight ON if POST FAILED, and does switch the
+ backlight ON if PASSED).
+
+ If not, then the video driver controls the display backlight (just
+ switch ON the backlight upon initialization).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 24 11:29:14 2008 +0100
+
+ lwmon5 SYSMON POST: fix handling of negative temperatures
+
+ Fix errors in the LWMON5 Sysmon POST for negative temperatures.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Mar 7 16:04:25 2008 +0900
+
+ pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
+
+ In current source code, when the device number of PCI is 0, process PCI
+ bridge without fail. However, when the device number is 0, it is not PCI
+ always bridge. There are times when device of PCI allocates.
+
+ When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
+ use this patch.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Mar 21 09:18:40 2008 +0100
+
+ LWMON5: fix dsPIC POST
+
+ Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
+
+commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 20 22:01:38 2008 +0100
+
+ lwmon5 POST: remove unreachable code
+
+ plus some coding style cleanup
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Mar 20 17:56:04 2008 +0300
+
+ LWMON5: POST RTC fix
+
+ Modify the RTC API to provide one a status for the time reported by
+ the rtc_get() function:
+ 0 - a reliable time is guaranteed,
+ < 0 - a reliable time isn't guaranteed (power fault, clock issues,
+ and so on).
+
+ The RTC chip drivers are responsible for providing this info if the
+ corresponding chip supports such functionality. If not - always
+ report that the time is reliable.
+
+ The POST RTC test was modified to detect the RTC faults utilizing
+ this new rtc_get() feature.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Mar 19 14:25:14 2008 +0100
+
+ TQM5200B: update MTD partition layout
+
+ - insert partition for dtb blob to TQM5200B MTD layout
+ - set env variables dependent on the configured board
+ (TQM5200 or TQM5200B)
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit f0105727d132f56a21fa3ed8b162309cca6cac44
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 19 07:09:26 2008 +0100
+
+ CFI: Small cleanup for FLASH_SHOW_PROGRESS
+
+ With this patch we don't need that many #ifdef's in the code. It moves
+ the subtraction into the macro and defines a NOP-macro when
+ CONFIG_FLASH_SHOW_PROGRESS is not defined.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9a042e9ca512beaaa2cb450274313fc477141241
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Sat Mar 8 13:48:01 2008 -0500
+
+ Flash programming progress countdown.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Feb 18 18:09:04 2008 +1100
+
+ libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
+
+ Since fdt_node_offset_by_compatible() was converted to the new
+ fdt_next_node() iterator, a chunk of initialization code became
+ redundant, but was not removed by oversight. This patch cleans it up.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit d0ccb9b140b472039732de102fc14597eedb14df
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Feb 18 18:06:31 2008 +1100
+
+ libfdt: Trivial cleanup for CHECK_HEADER)
+
+ Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
+ However, there are a handful of functions (fdt_move, rw_check_header,
+ fdt_open_into) from other files which could also use it (currently
+ they open-code something more-or-less identical). Therefore, this
+ patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
+ places.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit fe30a354cdbb808b5f15366a935b151a4ccee74f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 20 14:32:36 2008 -0600
+
+ Fix fdt boardsetup command parsing
+
+ The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 804887e6001e2f00bea11431bf34d6d472512cda
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 15 03:34:36 2008 -0600
+
+ Add sub-commands to fdt
+
+ fdt header - Display header info
+ fdt bootcpu <id> - Set boot cpuid
+ fdt memory <addr> <size> - Add/Update memory node
+ fdt rsvmem print - Show current mem reserves
+ fdt rsvmem add <addr> <size> - Add a mem reserve
+ fdt rsvmem delete <index> - Delete a mem reserves
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Thu Feb 14 16:50:34 2008 +1100
+
+ libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
+
+ fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
+ node which has NOP tags interspersed with its properties. In this
+ case fdt_add_subnode_namelen() will put the new subnode before the
+ first NOP tag, even if there are properties after it, which will
+ result in an invalid blob.
+
+ This patch fixes the bug, and adds a testcase for it.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Tue Feb 12 11:58:31 2008 +1100
+
+ libfdt: Add and use a node iteration helper function.
+
+ This patch adds an fdt_next_node() function which can be used to
+ iterate through nodes of the tree while keeping track of depth. This
+ function is used to simplify the iteration code in a lot of other
+ functions, and is also exported for use by library users.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Fri Jan 11 14:55:05 2008 +1100
+
+ libfdt: Add fdt_set_name() function
+
+ This patch adds an fdt_set_name() function to libfdt, mirroring
+ fdt_get_name(). This is a r/w function which alters the name of a
+ given device tree node.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 23e20aa6488e6c0622496549861bfdc74108debe
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:33:30 2008 +0100
+
+ lwmon5: Fix register test logic to match the specific GDC h/w.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 46bc0a938779aa1d664b847d36b08aa00f22e539
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:27:57 2008 +0100
+
+ Fix backlight in the lwmon5 POST.
+
+ Backlight was switched on even when temperature was too low.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Wed Feb 6 18:48:36 2008 +0100
+
+ The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
+
+ To enable this, alternative, configuration the U-Boot board configuration
+ file for lwmon5 includes the definitions of alternative addresses for header
+ (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
+
+ The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
+ and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
+ lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:11:53 2008 +0100
+
+ Add support for the lwmon5 board reset via GPIO58.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:09:55 2008 +0100
+
+ Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:11:03 2008 +0100
+
+ The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:42 2008 +0100
+
+ The patch adds new POST tests for the Lwmon5 board. These are:
+
+ * External Watchdog test;
+ * dsPIC tests;
+ * FPGA test;
+ * GDC test;
+ * Sysmon tests.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit c2ed33efbfff5767bca236828e021c55fd547b6c
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:01 2008 +0100
+
+ Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+
+commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 18 17:35:51 2008 +0100
+
+ HMI1001: fix compile problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1f2a9970109cebf7446e0503b10b71f8673045ee
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:32:30 2008 -0500
+
+ Blackfin: BF537-stamp: drop board-specific flash driver for CFI
+
+ The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
+ for the board specific driver at all. Just use the common CFI driver.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:36:14 2008 -0500
+
+ Blackfin: add proper ELF markings to some assembly functions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:35:17 2008 -0500
+
+ Blackfin: new cplbinfo command for viewing cplb tables
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit aadb72503cd1602349a5fe53356d5f55ecc1b900
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:37:51 2008 -0500
+
+ Blackfin: update MAINTAINERS list
+
+ Add maintainer information for the Blackfin boards.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:26:48 2008 -0500
+
+ Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
+
+ Stop tying things to the processor that should be tied to other defines and
+ change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
+ system to select the -mcpu option.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 86a20fb920bd198105acf7b1191117f566d637ed
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 16 07:40:36 2008 -0500
+
+ Blackfin: move bootldr command to common code
+
+ This moves the Blackfin-common bootldr command out of the BF537-STAMP
+ specific board directory and into the common directory so that all Blackfin
+ boards may utilize it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit decbe029b2a9d3333d02c433389b1c821eea96d7
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Mar 14 11:05:20 2008 +0100
+
+ mgcoge: update configuration
+
+ Fix configuration for mgcoge board
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit c136724cda0219c49f1d4b346f00da29b14fdf14
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 16 01:22:59 2008 +0100
+
+ drivers/rtc/Makefile: keep list sorted
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
+Author: Tor Krill <tor@excito.com>
+Date: Sat Mar 15 15:40:26 2008 +0100
+
+ Add support for Intersil isl1208 RTC
+
+ Signed-off-by: Tor Krill <tor@excito.com>
+
+commit 0210cff3d079d97b2156b13685ee8de368e68a1a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 15 17:36:41 2008 +0100
+
+ cramfs: Fix ifdef
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 16 01:12:58 2008 +0100
+
+ Conding style cleanup
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 41712b4e8c95dff23354bcd620e1f9477160c190
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 5 12:31:53 2008 +0100
+
+ ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
+
+ This patch adds USB OHCI support to the Canyonlands board port. It also
+ enables EXT2 support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2596f5b9d353ff3e4387a3325d05740f16958038
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 5 12:29:32 2008 +0100
+
+ usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
+
+ This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
+ way a board just needs to define this new option to enable the "force
+ NoPowerSwitching mode" instead of adding new CPU/architecture defines
+ to the USB source itself.
+
+ This new option will be used first with the new AMCC 460EX Canyonlands
+ board port, which will be posted in a few days.
+
+ This patch also fixes a small compilation problem when DEBUG is enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 71665ebf88408ff2acb762af47989fd4365b321a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Mar 3 17:27:02 2008 +0100
+
+ ppc4xx: Add Canyonlands NAND booting support
+
+ 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
+ NAND devices. The only bootstrap option for NAND booting is option F for
+ 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
+ EEPROM needs to be programmed accordingly.
+
+ This patch adds basic NAND booting support for the AMCC Canyonlands aval
+ board and also adds support to the "bootstrap" command, to enable NAND
+ booting I2C setting.
+
+ Tested with 512 byte page NAND device (32MByte) on Canyonlands.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 16:53:00 2008 +0100
+
+ ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
+
+ This patch adds support for the AMCC Canyonlands 460EX evaluation
+ board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 16:52:24 2008 +0100
+
+ ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
+
+ This patch adds support for the AMCC Canyonlands 460EX evaluation
+ board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 16:51:17 2008 +0100
+
+ ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
+
+ This patch adds support for the AMCC Canyonlands 460EX evaluation
+ board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:11:43 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:11:18 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 999ecd5aca381984d8ebbeb207ece82a1c275577
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:07:10 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:05:50 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:05:26 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 56e410178375d9f20be25fb24e180974f0ae120b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 22:07:57 2008 +0100
+
+ ppc4xx: interrupt.c reworked
+
+ This patch is a rework of the 4xx interrupt handling done while
+ adding the 460EX/GT support. Interrupts are needed on 4xx for the
+ EMAC driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 22:01:57 2008 +0100
+
+ ppc4xx: program_tlb now uses 64bit physical addess
+
+ This patch changes the physical addess parameter from 32bit to 64bit.
+ This is needed for 36bit 4xx platforms to access areas located
+ beyond the 4GB border, like SoC peripherals (EBC etc.).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c3307fa186af85771924c434997089b8104c0a46
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 21:58:25 2008 +0100
+
+ ppc4xx: miiphy.c reworked
+
+ While adding the 460EX/GT support I reworked the 4xx miiphy code. It
+ badly neede some cleanup.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 16:21:49 2008 +0100
+
+ rtc: Add M41T62 support
+
+ This patch add support for the STM M41T62 RTC. It is used and tested
+ on the AMCC Canyonlands 406EX platform.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 217d383e201adc7f2271145ae345ea5eae2b7170
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:46:43 2008 +0100
+
+ ppc4xx: Add 405GPr based MCU25 board specific files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:46:42 2008 +0100
+
+ ppc4xx: Add 405GPr based MCU25 board config file
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit b05f35436b733a240559e77e46bed8439665ecc5
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:46:41 2008 +0100
+
+ ppc4xx: Add 405GPr based MCU25 board. Global files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:37:02 2008 +0100
+
+ ppc4xx: HCU4/5. remove obsolete hcu_flash.c
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit a079494853cc2bfeddb26673219db0b4b2b31566
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:37:01 2008 +0100
+
+ ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
+
+ Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
+ the FLASH_CFI_LEGACY et al. config options.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit e4170e5a50c8110f792bc37472833ae669d69951
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 13:52:25 2008 +0100
+
+ ppc4xx: Fix comment in 405EX DDR2 init code
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Mar 14 16:04:54 2008 +0100
+
+ tools/setlocalversion: use a git-describe-ish format
+
+ Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
+ where 'nnnnn' is the number of commits since the last tag (i.e.,
+ 1.3.2-rc3). This makes it much easier to recognize "newer" versions
+ and to see how much has been changed since the referenced tag.
+
+ Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c6dc21c84de0f159a1752c5ebd33cff843f63609
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 13 14:32:03 2008 +0100
+
+ HMI1001: add support for MPC5200 Rev. B processors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 13 14:29:49 2008 +0100
+
+ TQM5200: remove dead code
+
+ This board never used a MGT5100 processor.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 30f1806f60978d707b0cff2d7bf89d141fc24290
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 16:20:02 2008 +0100
+
+ Release v1.3.2
+
+ Update CHANGELOG for release.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sun Mar 9 14:52:11 2008 +0100
diff --git a/MAINTAINERS b/MAINTAINERS
index dc13580..e31ea06 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -172,6 +172,7 @@
Niklaus Giger <niklaus.giger@netstal.com>
HCU4 PPC405GPr
+ MCU25 PPC405GPr
HCU5 PPC440EPx
Frank Gottschling <fgottschling@eltec.de>
@@ -319,6 +320,7 @@
alpr PPC440GX
bamboo PPC440EP
bunbinga PPC405EP
+ canyonlands PPC460EX
ebony PPC440GP
haleakala PPC405EXr
katmai PPC440SPe
@@ -702,5 +704,20 @@
MS7720SE SH7720
#########################################################################
+# Blackfin Systems: #
+# #
+# Maintainer Name, Email Address #
+# Board CPU #
+#########################################################################
+
+Mike Frysinger <vapier@gentoo.org>
+Blackfin Team <u-boot-devel@blackfin.uclinux.org>
+
+ BF533-EZKIT BF533
+ BF533-STAMP BF533
+ BF537-STAMP BF537
+ BF561-EZKIT BF561
+
+#########################################################################
# End of MAINTAINERS list #
#########################################################################
diff --git a/MAKEALL b/MAKEALL
index 0e1c0cb..01573da 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -165,6 +165,8 @@
bamboo_nand \
bubinga \
CANBT \
+ canyonlands \
+ canyonlands_nand \
CMS700 \
CPCI2DP \
CPCI405 \
@@ -198,6 +200,7 @@
luan \
lwmon5 \
makalu \
+ mcu25 \
METROBOX \
MIP405 \
MIP405T \
diff --git a/Makefile b/Makefile
index 3bb8a74..4255cf5 100644
--- a/Makefile
+++ b/Makefile
@@ -339,10 +339,12 @@
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
$(ONENAND_IPL): $(VERSION_FILE) $(obj)include/autoconf.mk
- $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
+ $(MAKE) -C $(obj)onenand_ipl/board/$(BOARDDIR) all
$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
+ $(MAKE) -C $(obj)onenand_ipl/board/$(BOARDDIR) all
cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
+ cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin
$(VERSION_FILE):
@( echo -n "#define U_BOOT_VERSION \"U-Boot " ; \
@@ -1170,6 +1172,17 @@
CANBT_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
+canyonlands_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx canyonlands amcc
+
+canyonlands_nand_config: unconfig
+ @mkdir -p $(obj)include $(obj)board/amcc/canyonlands
+ @mkdir -p $(obj)nand_spl/board/amcc/canyonlands
+ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
+ @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
CATcenter_config \
CATcenter_25_config \
CATcenter_33_config: unconfig
@@ -1281,6 +1294,10 @@
makalu_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
+mcu25_config: unconfig
+ @mkdir -p $(obj)board/netstal/common
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
+
METROBOX_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
@@ -1594,7 +1611,7 @@
PQ2FADS-ZU_66MHz_lowboot_config \
: unconfig
@mkdir -p $(obj)include
- @mkdir -p $(obj)board/mpc8260ads
+ @mkdir -p $(obj)board/freescale/mpc8260ads
$(if $(findstring PQ2FADS,$@), \
@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \
@echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
@@ -1603,13 +1620,13 @@
$(if $(findstring VR,$@), \
@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
@[ -z "$(findstring lowboot_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF800000" >$(obj)board/mpc8260ads/config.tmp ; \
+ { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
$(XECHO) "... with lowboot configuration" ; \
}
- @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads
+ @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
MPC8266ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
@@ -2228,7 +2245,7 @@
@$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
mpc7448hpc2_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
P3G4_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
@@ -2455,11 +2472,6 @@
cm41xx_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
-gth2_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
- @$(MKCONFIG) -a gth2 mips mips gth2
-
#########################################################################
## S3C44B0 Systems
#########################################################################
@@ -2662,6 +2674,11 @@
@echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
@$(MKCONFIG) -a pb1x00 mips mips pb1x00
+gth2_config: unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
+ @$(MKCONFIG) -a gth2 mips mips gth2
+
qemu_mips_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
@@ -2858,7 +2875,7 @@
$(obj)board/{integratorap,integratorcp}/u-boot.lds \
$(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds
@rm -f $(obj)include/bmp_logo.h $(obj)nand_spl/{u-boot-spl,u-boot-spl.map}
- @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl.map}
+ @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
@rm -f $(obj)api_examples/demo $(VERSION_FILE)
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
diff --git a/README b/README
index 26bd0cf..c8d7e35 100644
--- a/README
+++ b/README
@@ -669,6 +669,7 @@
CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC
CONFIG_RTC_DS1338 - use Maxim, Inc. DS1338 RTC
CONFIG_RTC_DS164x - use Dallas DS164x RTC
+ CONFIG_RTC_ISL1208 - use Intersil ISL1208 RTC
CONFIG_RTC_MAX6900 - use Maxim, Inc. MAX6900 RTC
Note that if the RTC uses I2C, then the I2C interface
@@ -2001,6 +2002,11 @@
is useful, if some of the configured banks are only
optionally available.
+- CONFIG_FLASH_SHOW_PROGRESS
+ If defined (must be an integer), print out countdown
+ digits and dots. Recommended value: 45 (9..1) for 80
+ column displays, 15 (3..1) for 40 column displays.
+
- CFG_RX_ETH_BUFFER:
Defines the number of ethernet receive buffers. On some
ethernet controllers it is recommended to set this value
diff --git a/blackfin_config.mk b/blackfin_config.mk
index a7513ea..d90eb23 100644
--- a/blackfin_config.mk
+++ b/blackfin_config.mk
@@ -24,9 +24,13 @@
PLATFORM_RELFLAGS += -ffixed-P5
PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN
+ifneq (,$(CONFIG_BFIN_CPU))
+PLATFORM_RELFLAGS += -mcpu=$(CONFIG_BFIN_CPU)
+endif
+
SYM_PREFIX = _
LDR_FLAGS += --use-vmas
-ifeq (,$(findstring s,$(MAKEFLAGS)))
+ifneq (,$(findstring s,$(MAKEFLAGS)))
LDR_FLAGS += --quiet
endif
diff --git a/board/adder/adder.c b/board/adder/adder.c
index aa781584..817c864 100644
--- a/board/adder/adder.c
+++ b/board/adder/adder.c
@@ -26,6 +26,9 @@
#include <common.h>
#include <mpc8xx.h>
+#if defined(CONFIG_OF_LIBFDT)
+ #include <libfdt.h>
+#endif
/*
* SDRAM is single Samsung K4S643232F-T70 chip (8MB)
@@ -111,3 +114,11 @@
return 0;
}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+
+}
+#endif
diff --git a/board/amcc/canyonlands/Makefile b/board/amcc/canyonlands/Makefile
new file mode 100644
index 0000000..7a2eaa5
--- /dev/null
+++ b/board/amcc/canyonlands/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2008
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+COBJS += bootstrap.o
+SOBJS := init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c
new file mode 100644
index 0000000..37fa1c9
--- /dev/null
+++ b/board/amcc/canyonlands/bootstrap.c
@@ -0,0 +1,170 @@
+/*
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <asm/io.h>
+
+/*
+ * NOR and NAND boot options change bytes 5, 6, 8, 9, 11. The
+ * values are independent of the rest of the clock settings.
+ */
+
+#define NAND_COMPATIBLE 0x01
+#define NOR_COMPATIBLE 0x02
+
+#define I2C_EEPROM_ADDR 0x52
+
+static char *config_labels[] = {
+ "CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+ "CPU: 800 PLB: 200 OPB: 100 EBC: 100",
+ NULL
+};
+
+static u8 boot_configs[][17] = {
+ {
+ (NAND_COMPATIBLE | NOR_COMPATIBLE),
+ 0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0, 0x40, 0x08,
+ 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ },
+ {
+ (NAND_COMPATIBLE | NOR_COMPATIBLE),
+ 0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0, 0x40, 0x08,
+ 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ },
+ {
+ 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+ }
+};
+
+/*
+ * Bytes 5,6,8,9,11 change for NAND boot
+ */
+static u8 nand_boot[] = {
+ 0x90, 0x01, 0xa0, 0x68, 0x58
+};
+
+static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ u8 *buf, b_nand;
+ int x, y, nbytes, selcfg;
+ extern char console_buffer[];
+
+ if (argc < 2) {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if ((strcmp(argv[1], "nor") != 0) &&
+ (strcmp(argv[1], "nand") != 0)) {
+ printf("Unsupported boot-device - only nor|nand support\n");
+ return 1;
+ }
+
+ /* set the nand flag based on provided input */
+ if ((strcmp(argv[1], "nand") == 0))
+ b_nand = 1;
+ else
+ b_nand = 0;
+
+ printf("Available configurations: \n\n");
+
+ if (b_nand) {
+ for(x = 0, y = 0; boot_configs[x][0] != 0; x++) {
+ /* filter on nand compatible */
+ if (boot_configs[x][0] & NAND_COMPATIBLE) {
+ printf(" %d - %s\n", (y+1), config_labels[x]);
+ y++;
+ }
+ }
+ } else {
+ for(x = 0, y = 0; boot_configs[x][0] != 0; x++) {
+ /* filter on nor compatible */
+ if (boot_configs[x][0] & NOR_COMPATIBLE) {
+ printf(" %d - %s\n", (y+1), config_labels[x]);
+ y++;
+ }
+ }
+ }
+
+ do {
+ nbytes = readline(" Selection [1-x / quit]: ");
+
+ if (nbytes) {
+ if (strcmp(console_buffer, "quit") == 0)
+ return 0;
+ selcfg = simple_strtol(console_buffer, NULL, 10);
+ if ((selcfg < 1) || (selcfg > y))
+ nbytes = 0;
+ }
+ } while (nbytes == 0);
+
+
+ y = (selcfg - 1);
+
+ for (x = 0; boot_configs[x][0] != 0; x++) {
+ if (b_nand) {
+ if (boot_configs[x][0] & NAND_COMPATIBLE) {
+ if (y > 0)
+ y--;
+ else if (y < 1)
+ break;
+ }
+ } else {
+ if (boot_configs[x][0] & NOR_COMPATIBLE) {
+ if (y > 0)
+ y--;
+ else if (y < 1)
+ break;
+ }
+ }
+ }
+
+ buf = &boot_configs[x][1];
+
+ if (b_nand) {
+ buf[5] = nand_boot[0];
+ buf[6] = nand_boot[1];
+ buf[8] = nand_boot[2];
+ buf[9] = nand_boot[3];
+ buf[11] = nand_boot[4];
+ }
+
+ if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
+ printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);
+ udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+
+ printf("Done\n");
+ printf("Please power-cycle the board for the changes to take effect\n");
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ bootstrap, 2, 0, do_bootstrap,
+ "bootstrap - program the I2C bootstrap EEPROM\n",
+ "<nand|nor> - strap to boot from NAND or NOR flash\n"
+ );
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
new file mode 100644
index 0000000..36779f5
--- /dev/null
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -0,0 +1,418 @@
+/*
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc440.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/4xx_pcie.h>
+#include <asm/gpio.h>
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ u32 sdr0_cust0;
+
+ /*------------------------------------------------------------------+
+ * Setup the interrupt controller polarities, triggers, etc.
+ *------------------------------------------------------------------*/
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(uic2er, 0x00000000); /* disable all */
+ mtdcr(uic2cr, 0x00000000); /* all non-critical */
+ mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic3sr, 0xffffffff); /* clear all */
+ mtdcr(uic3er, 0x00000000); /* disable all */
+ mtdcr(uic3cr, 0x00000000); /* all non-critical */
+ mtdcr(uic3pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic3tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic3vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic3sr, 0xffffffff); /* clear all */
+
+ /* SDR Setting - enable NDFC */
+ mfsdr(SDR0_CUST0, sdr0_cust0);
+ sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL |
+ SDR0_CUST0_NDFC_ENABLE |
+ SDR0_CUST0_NDFC_BW_8_BIT |
+ SDR0_CUST0_NDFC_ARE_MASK |
+ SDR0_CUST0_NDFC_BAC_ENCODE(3) |
+ (0x80000000 >> (28 + CFG_NAND_CS));
+ mtsdr(SDR0_CUST0, sdr0_cust0);
+
+ /*
+ * Configure PFC (Pin Function Control) registers
+ * UART0: 4 pins
+ */
+ mtsdr(SDR0_PFC1, 0x00040000);
+
+ /* Enable PCI host functionality in SDR0_PCI0 */
+ mtsdr(SDR0_PCI0, 0xe0000000);
+
+ /* Enable ethernet and take out of reset */
+ out_8((void *)CFG_BCSR_BASE + 6, 0);
+
+ /* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */
+ out_8((void *)CFG_BCSR_BASE + 5, 0);
+
+ /* Enable USB host & USB-OTG */
+ out_8((void *)CFG_BCSR_BASE + 7, 0);
+
+ mtsdr(SDR0_SRST1, 0); /* Pull AHB out of reset default=1 */
+
+ /* Setup PLB4-AHB bridge based on the system address map */
+ mtdcr(AHB_TOP, 0x8000004B);
+ mtdcr(AHB_BOT, 0x8000004B);
+
+ /*
+ * Configure USB-STP pins as alternate and not GPIO
+ * It seems to be neccessary to configure the STP pins as GPIO
+ * input at powerup (perhaps while USB reset is asserted). So
+ * we configure those pins to their "real" function now.
+ */
+ gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+ gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+
+ return 0;
+}
+
+int checkboard (void)
+{
+ char *s = getenv("serial#");
+ u32 pvr = get_pvr();
+
+ if ((pvr == PVR_460GT_RA) || (pvr == PVR_460GT_SE_RA))
+ printf("Board: Glacier - AMCC PPC460GT Evaluation Board");
+ else
+ printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return (0);
+}
+
+/*
+ * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
+ * board specific values.
+ */
+u32 ddr_wrdtr(u32 default_val) {
+ return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_180_DEG_ADV | 0x823);
+}
+
+u32 ddr_clktr(u32 default_val) {
+ return (SDRAM_CLKTR_CLKP_90_DEG_ADV);
+}
+
+#if defined(CONFIG_NAND_U_BOOT)
+/*
+ * NAND booting U-Boot version uses a fixed initialization, since the whole
+ * I2C SPD DIMM autodetection/calibration doesn't fit into the 4k of boot
+ * code.
+ */
+long int initdram(int board_type)
+{
+ return CFG_MBYTES_SDRAM << 20;
+}
+#endif
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *)0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+
+ mtmsr(0);
+
+ for (k = 0; k < CFG_KBYTES_SDRAM;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0) {
+ printf("%3d MB\r", k / 1024);
+ }
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose )
+{
+ /*-------------------------------------------------------------------+
+ * Disable everything
+ *-------------------------------------------------------------------*/
+ out_le32((void *)PCIX0_PIM0SA, 0); /* disable */
+ out_le32((void *)PCIX0_PIM1SA, 0); /* disable */
+ out_le32((void *)PCIX0_PIM2SA, 0); /* disable */
+ out_le32((void *)PCIX0_EROMBA, 0); /* disable expansion rom */
+
+ /*-------------------------------------------------------------------+
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
+ * strapping options to not support sizes such as 128/256 MB.
+ *-------------------------------------------------------------------*/
+ out_le32((void *)PCIX0_PIM0LAL, CFG_SDRAM_BASE);
+ out_le32((void *)PCIX0_PIM0LAH, 0);
+ out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
+ out_le32((void *)PCIX0_BAR0, 0);
+
+ /*-------------------------------------------------------------------+
+ * Program the board's subsystem id/vendor id
+ *-------------------------------------------------------------------*/
+ out_le16((void *)PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
+ out_le16((void *)PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
+
+ out_le16((void *)PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+#if defined(CONFIG_PCI)
+/*
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
+int is_pci_host(struct pci_controller *hose)
+{
+ /* Board is always configured as host. */
+ return (1);
+}
+
+static struct pci_controller pcie_hose[2] = {{0},{0}};
+
+void pcie_setup_hoses(int busno)
+{
+ struct pci_controller *hose;
+ int i, bus;
+ int ret = 0;
+ char *env;
+ unsigned int delay;
+
+ /*
+ * assume we're called after the PCIX hose is initialized, which takes
+ * bus ID 0 and therefore start numbering PCIe's from 1.
+ */
+ bus = busno;
+ for (i = 0; i <= 1; i++) {
+
+ if (is_end_point(i))
+ ret = ppc4xx_init_pcie_endport(i);
+ else
+ ret = ppc4xx_init_pcie_rootport(i);
+ if (ret) {
+ printf("PCIE%d: initialization as %s failed\n", i,
+ is_end_point(i) ? "endpoint" : "root-complex");
+ continue;
+ }
+
+ hose = &pcie_hose[i];
+ hose->first_busno = bus;
+ hose->last_busno = bus;
+ hose->current_busno = bus;
+
+ /* setup mem resource */
+ pci_set_region(hose->regions + 0,
+ CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+ CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+ CFG_PCIE_MEMSIZE,
+ PCI_REGION_MEM);
+ hose->region_count = 1;
+ pci_register_hose(hose);
+
+ if (is_end_point(i)) {
+ ppc4xx_setup_pcie_endpoint(hose, i);
+ /*
+ * Reson for no scanning is endpoint can not generate
+ * upstream configuration accesses.
+ */
+ } else {
+ ppc4xx_setup_pcie_rootpoint(hose, i);
+ env = getenv ("pciscandelay");
+ if (env != NULL) {
+ delay = simple_strtoul(env, NULL, 10);
+ if (delay > 5)
+ printf("Warning, expect noticable delay before "
+ "PCIe scan due to 'pciscandelay' value!\n");
+ mdelay(delay * 1000);
+ }
+
+ /*
+ * Config access can only go down stream
+ */
+ hose->last_busno = pci_hose_scan(hose);
+ bus = hose->last_busno + 1;
+ }
+ }
+}
+#endif /* CONFIG_PCI */
+
+int board_early_init_r (void)
+{
+ /*
+ * Canyonlands has 64MBytes of NOR FLASH (Spansion 29GL512), but the
+ * boot EBC mapping only supports a maximum of 16MBytes
+ * (4.ff00.0000 - 4.ffff.ffff).
+ * To solve this problem, the FLASH has to get remapped to another
+ * EBC address which accepts bigger regions:
+ *
+ * 0xfc00.0000 -> 4.cc00.0000
+ */
+
+ /* Remap the NOR FLASH to 0xcc00.0000 ... 0xcfff.ffff */
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ mtebc(pb3cr, CFG_FLASH_BASE_PHYS_L | 0xda000);
+#else
+ mtebc(pb0cr, CFG_FLASH_BASE_PHYS_L | 0xda000);
+#endif
+
+ /* Remove TLB entry of boot EBC mapping */
+ remove_tlb(CFG_BOOT_BASE_ADDR, 16 << 20);
+
+ /* Add TLB entry for 0xfc00.0000 -> 0x4.cc00.0000 */
+ program_tlb(CFG_FLASH_BASE_PHYS, CFG_FLASH_BASE, CFG_FLASH_SIZE,
+ TLB_WORD2_I_ENABLE);
+
+ /*
+ * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
+ * 0xfc00.0000 is possible
+ */
+
+ /*
+ * Clear potential errors resulting from auto-calibration.
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ set_mcsr(get_mcsr());
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ u32 sdr0_srst1 = 0;
+ u32 eth_cfg;
+
+ /*
+ * Set EMAC mode/configuration (GMII, SGMII, RGMII...).
+ * This is board specific, so let's do it here.
+ */
+ mfsdr(SDR0_ETH_CFG, eth_cfg);
+ /* disable SGMII mode */
+ eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE |
+ SDR0_ETH_CFG_SGMII1_ENABLE |
+ SDR0_ETH_CFG_SGMII0_ENABLE);
+ /* Set the for 2 RGMII mode */
+ /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
+ eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
+ eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
+ mtsdr(SDR0_ETH_CFG, eth_cfg);
+
+ /*
+ * The AHB Bridge core is held in reset after power-on or reset
+ * so enable it now
+ */
+ mfsdr(SDR0_SRST1, sdr0_srst1);
+ sdr0_srst1 &= ~SDR0_SRST1_AHB;
+ mtsdr(SDR0_SRST1, sdr0_srst1);
+
+ return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 val[4];
+ int rc;
+
+ ft_cpu_setup(blob, bd);
+
+ /* Fixup NOR mapping */
+ val[0] = 0; /* chip select number */
+ val[1] = 0; /* always 0 */
+ val[2] = gd->bd->bi_flashstart;
+ val[3] = gd->bd->bi_flashsize;
+ rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+ val, sizeof(val), 1);
+ if (rc)
+ printf("Unable to update property NOR mapping, err=%s\n",
+ fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk
new file mode 100644
index 0000000..1e4bbc4
--- /dev/null
+++ b/board/amcc/canyonlands/config.mk
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# AMCC 460EX/460GT Evaluation Board (Canyonlands) board
+#
+
+sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+ifeq ($(CONFIG_NAND_U_BOOT),y)
+LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
+endif
+
+ifeq ($(CONFIG_PCIBOOT_U_BOOT),y)
+LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/amcc/canyonlands/init.S b/board/amcc/canyonlands/init.S
new file mode 100644
index 0000000..bd4cab5
--- /dev/null
+++ b/board/amcc/canyonlands/init.S
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm-ppc/mmu.h>
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to
+ * use the speed up boot process. It is patched after relocation to
+ * enable SA_I
+ */
+#ifndef CONFIG_NAND_SPL
+ tlbentry(CFG_BOOT_BASE_ADDR, SZ_16M, CFG_BOOT_BASE_ADDR, 4, AC_R|AC_W|AC_X|SA_G) /* TLB 0 */
+#else
+ tlbentry(CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 4, AC_R|AC_W|AC_X|SA_G)
+ tlbentry(CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+#endif
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
+
+#ifdef CFG_INIT_RAM_DCACHE
+ /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+ tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
+#endif
+
+ tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+
+ tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+
+ /* PCIe UTL register */
+ tlbentry(CFG_PCIE_BASE, SZ_16K, 0x08010000, 0xC, AC_R|AC_W|SA_G|SA_I)
+
+ /* TLB-entry for NAND */
+ tlbentry(CFG_NAND_ADDR, SZ_16M, CFG_NAND_ADDR, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ /* TLB-entry for CPLD */
+ tlbentry(CFG_BCSR_BASE, SZ_1K, CFG_BCSR_BASE, 4, AC_R|AC_W|SA_G|SA_I)
+
+ /* TLB-entry for OCM */
+ tlbentry(CFG_OCM_BASE, SZ_16K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I)
+
+ /* TLB-entry for Local Configuration registers => peripherals */
+ tlbentry(CFG_LOCAL_CONF_REGS, SZ_16M, CFG_LOCAL_CONF_REGS, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ /* AHB: Internal USB Peripherals (USB, SATA) */
+ tlbentry(CFG_AHB_BASE, SZ_1M, 0xbff00000, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ tlbtab_end
+
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+ /*
+ * For NAND booting the first TLB has to be reconfigured to full size
+ * and with caching disabled after running from RAM!
+ */
+#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ .globl reconfig_tlb0
+reconfig_tlb0:
+ sync
+ isync
+ addi r4,r0,0x0000 /* TLB entry #0 */
+ lis r5,TLB00@h
+ ori r5,r5,TLB00@l
+ tlbwe r5,r4,0x0000 /* Save it out */
+ lis r5,TLB01@h
+ ori r5,r5,TLB01@l
+ tlbwe r5,r4,0x0001 /* Save it out */
+ lis r5,TLB02@h
+ ori r5,r5,TLB02@l
+ tlbwe r5,r4,0x0002 /* Save it out */
+ sync
+ isync
+ blr
+#endif
diff --git a/board/amcc/canyonlands/u-boot-nand.lds b/board/amcc/canyonlands/u-boot-nand.lds
new file mode 100644
index 0000000..12a5dcf
--- /dev/null
+++ b/board/amcc/canyonlands/u-boot-nand.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+
+ /* Align to next NAND block */
+ . = ALIGN(0x4000);
+ common/environment.o (.ppcenv)
+ /* Keep some space here for redundant env and potential bad env blocks */
+ . = ALIGN(0x10000);
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/amcc/canyonlands/u-boot.lds b/board/amcc/canyonlands/u-boot.lds
new file mode 100644
index 0000000..7496f48
--- /dev/null
+++ b/board/amcc/canyonlands/u-boot.lds
@@ -0,0 +1,146 @@
+/*
+ * (C) Copyright 2008
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/amcc/canyonlands/init.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/amcc/kilauea/init.S b/board/amcc/kilauea/init.S
index 4338744..053fe19 100644
--- a/board/amcc/kilauea/init.S
+++ b/board/amcc/kilauea/init.S
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* Based on code provided from UDTech and AMCC
@@ -64,7 +64,7 @@
/* SET SDRAM_MB3CF - Not enabled */
mtsdram_as(SDRAM_MB3CF, 0x00000000);
- /* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+ /* SDRAM_CLKTR: Adv Addr clock by 180 deg */
mtsdram_as(SDRAM_CLKTR, 0x80000000);
/* Refresh Time register (0x30) Refresh every 7.8125uS */
diff --git a/board/amcc/makalu/init.S b/board/amcc/makalu/init.S
index 57c1774..5e9a5e0 100644
--- a/board/amcc/makalu/init.S
+++ b/board/amcc/makalu/init.S
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* Based on code provided from Senao and AMCC
@@ -57,7 +57,7 @@
/* base=08000000, size=128MByte (5), mode=2 (n*10*4) */
mtsdram_as(SDRAM_MB1CF, (0x08000000 >> 3) | 0x5201);
- /* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+ /* SDRAM_CLKTR: Adv Addr clock by 180 deg */
mtsdram_as(SDRAM_CLKTR,0x80000000);
/* Refresh Time register (0x30) Refresh every 7.8125uS */
diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c
index 98ed6f8..738f69c 100644
--- a/board/bf533-ezkit/bf533-ezkit.c
+++ b/board/bf533-ezkit/bf533-ezkit.c
@@ -34,13 +34,6 @@
int checkboard(void)
{
-#if (BFIN_CPU == ADSP_BF531)
- printf("CPU: ADSP BF531 Rev.: 0.%d\n", *pCHIPID >> 28);
-#elif (BFIN_CPU == ADSP_BF532)
- printf("CPU: ADSP BF532 Rev.: 0.%d\n", *pCHIPID >> 28);
-#else
- printf("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
-#endif
printf("Board: ADI BF533 EZ-Kit Lite board\n");
printf(" Support: http://blackfin.uclinux.org/\n");
return 0;
diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c
index af03597..c4dde92 100644
--- a/board/bf533-stamp/bf533-stamp.c
+++ b/board/bf533-stamp/bf533-stamp.c
@@ -43,13 +43,6 @@
int checkboard(void)
{
-#if (BFIN_CPU == ADSP_BF531)
- printf("CPU: ADSP BF531 Rev.: 0.%d\n", *pCHIPID >> 28);
-#elif (BFIN_CPU == ADSP_BF532)
- printf("CPU: ADSP BF532 Rev.: 0.%d\n", *pCHIPID >> 28);
-#else
- printf("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
-#endif
printf("Board: ADI BF533 Stamp board\n");
printf(" Support: http://blackfin.uclinux.org/\n");
return 0;
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
index e488844..5d22393 100644
--- a/board/bf537-stamp/Makefile
+++ b/board/bf537-stamp/Makefile
@@ -29,7 +29,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o flash.o ether_bf537.o post-memory.o stm_m25p64.o cmd_bf537led.o nand.o
+COBJS := $(BOARD).o post-memory.o stm_m25p64.o cmd_bf537led.o nand.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
index d279817..6ca8e21 100644
--- a/board/bf537-stamp/bf537-stamp.c
+++ b/board/bf537-stamp/bf537-stamp.c
@@ -31,7 +31,6 @@
#include <asm/blackfin.h>
#include <asm/io.h>
#include <net.h>
-#include "ether_bf537.h"
#include <asm/mach-common/bits/bootrom.h>
/**
@@ -54,60 +53,8 @@
#define POST_WORD_ADDR 0xFF903FFC
-/*
- * the bootldr command loads an address, checks to see if there
- * is a Boot stream that the on-chip BOOTROM can understand,
- * and loads it via the BOOTROM Callback. It is possible
- * to also add booting from SPI, or TWI, but this function does
- * not currently support that.
- */
-int do_bootldr(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- ulong addr, entry;
- ulong *data;
-
- /* Get the address */
- if (argc < 2) {
- addr = load_addr;
- } else {
- addr = simple_strtoul(argv[1], NULL, 16);
- }
-
- /* Check if it is a LDR file */
- data = (ulong *) addr;
- if (*data == 0xFF800060 || *data == 0xFF800040 || *data == 0xFF800020) {
- /* We want to boot from FLASH or SDRAM */
- entry = _BOOTROM_BOOT_DXE_FLASH;
- printf("## Booting ldr image at 0x%08lx ...\n", addr);
- if (icache_status())
- icache_disable();
- if (dcache_status())
- dcache_disable();
-
- __asm__("R7=%[a];\n" "P0=%[b];\n" "JUMP (P0);\n":
- :[a] "d"(addr),[b] "a"(entry)
- :"R7", "P0");
-
- } else {
- printf("## No ldr image at address 0x%08lx\n", addr);
- }
-
- return 0;
-}
-
-U_BOOT_CMD(bootldr, 2, 0, do_bootldr,
- "bootldr - boot ldr image from memory\n",
- "[addr]\n - boot ldr image stored in memory\n");
-
int checkboard(void)
{
-#if (BFIN_CPU == ADSP_BF534)
- printf("CPU: ADSP BF534 Rev.: 0.%d\n", *pCHIPID >> 28);
-#elif (BFIN_CPU == ADSP_BF536)
- printf("CPU: ADSP BF536 Rev.: 0.%d\n", *pCHIPID >> 28);
-#else
- printf("CPU: ADSP BF537 Rev.: 0.%d\n", *pCHIPID >> 28);
-#endif
printf("Board: ADI BF537 stamp board\n");
printf(" Support: http://blackfin.uclinux.org/\n");
return 0;
@@ -187,9 +134,6 @@
pMACaddr[2], pMACaddr[3], pMACaddr[4], pMACaddr[5]);
setenv("ethaddr", nid);
}
- if (getenv("ethaddr")) {
- SetupMacAddr(SrcAddr);
- }
#endif
#endif /* BFIN_BOOT_MODE == BF537_BYPASS_BOOT */
diff --git a/board/bf537-stamp/flash-defines.h b/board/bf537-stamp/flash-defines.h
deleted file mode 100644
index 1fa7a10..0000000
--- a/board/bf537-stamp/flash-defines.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * U-boot - flash-defines.h
- *
- * Copyright (c) 2005-2007 Analog Devices Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#ifndef __FLASHDEFINES_H__
-#define __FLASHDEFINES_H__
-
-#include <common.h>
-
-#define V_ULONG(a) (*(volatile unsigned long *)( a ))
-#define V_BYTE(a) (*(volatile unsigned char *)( a ))
-#define TRUE 0x1
-#define FALSE 0x0
-#define BUFFER_SIZE 0x80000
-#define NO_COMMAND 0
-#define GET_CODES 1
-#define RESET 2
-#define WRITE 3
-#define FILL 4
-#define ERASE_ALL 5
-#define ERASE_SECT 6
-#define READ 7
-#define GET_SECTNUM 8
-#define FLASH_START_L 0x0000
-#define FLASH_START_H 0x2000
-#define FLASH_MAN_ST 2
-#define RESET_VAL 0xF0
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-
-int get_codes(void);
-int poll_toggle_bit(long lOffset);
-void reset_flash(void);
-int erase_flash(void);
-int erase_block_flash(int);
-void unlock_flash(long lOffset);
-int write_data(long lStart, long lCount, uchar * pnData);
-int read_flash(long nOffset, int *pnValue);
-int write_flash(long nOffset, int nValue);
-void get_sector_number(long lOffset, int *pnSector);
-int GetSectorProtectionStatus(flash_info_t * info, int nSector);
-int GetOffset(int nBlock);
-int AFP_NumSectors = 71;
-long AFP_SectorSize2 = 0x10000;
-int AFP_SectorSize1 = 0x2000;
-
-#define NUM_SECTORS 71
-
-#define WRITESEQ1 0x0AAA
-#define WRITESEQ2 0x0554
-#define WRITESEQ3 0x0AAA
-#define WRITESEQ4 0x0AAA
-#define WRITESEQ5 0x0554
-#define WRITESEQ6 0x0AAA
-#define WRITEDATA1 0xaa
-#define WRITEDATA2 0x55
-#define WRITEDATA3 0x80
-#define WRITEDATA4 0xaa
-#define WRITEDATA5 0x55
-#define WRITEDATA6 0x10
-#define PriFlashABegin 0
-#define SecFlashABegin 8
-#define SecFlashBBegin 36
-#define PriFlashAOff 0x0
-#define PriFlashBOff 0x100000
-#define SecFlashAOff 0x10000
-#define SecFlashBOff 0x280000
-#define INVALIDLOCNSTART 0x20270000
-#define INVALIDLOCNEND 0x20280000
-#define BlockEraseVal 0x30
-#define UNLOCKDATA1 0xaa
-#define UNLOCKDATA2 0x55
-#define UNLOCKDATA3 0xa0
-#define GETCODEDATA1 0xaa
-#define GETCODEDATA2 0x55
-#define GETCODEDATA3 0x90
-#define SecFlashASec1Off 0x200000
-#define SecFlashASec2Off 0x204000
-#define SecFlashASec3Off 0x206000
-#define SecFlashASec4Off 0x208000
-#define SecFlashAEndOff 0x210000
-#define SecFlashBSec1Off 0x280000
-#define SecFlashBSec2Off 0x284000
-#define SecFlashBSec3Off 0x286000
-#define SecFlashBSec4Off 0x288000
-#define SecFlashBEndOff 0x290000
-
-#define SECT32 32
-#define SECT33 33
-#define SECT34 34
-#define SECT35 35
-#define SECT36 36
-#define SECT37 37
-#define SECT38 38
-#define SECT39 39
-
-#define FLASH_SUCCESS 0
-#define FLASH_FAIL -1
-
-#endif
diff --git a/board/bf537-stamp/flash.c b/board/bf537-stamp/flash.c
deleted file mode 100644
index 8252c42..0000000
--- a/board/bf537-stamp/flash.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * U-boot - flash.c Flash driver for PSD4256GV
- *
- * Copyright (c) 2005-2007 Analog Devices Inc.
- * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <malloc.h>
-#include <config.h>
-#include <asm/io.h>
-#include "flash-defines.h"
-
-void flash_reset(void)
-{
- reset_flash();
-}
-
-unsigned long flash_get_size(ulong baseaddr, flash_info_t * info, int bank_flag)
-{
- int id = 0, i = 0;
- static int FlagDev = 1;
-
- id = get_codes();
- if (FlagDev) {
- FlagDev = 0;
- }
- info->flash_id = id;
- switch (bank_flag) {
- case 0:
- for (i = PriFlashABegin; i < SecFlashABegin; i++)
- info->start[i] = (baseaddr + (i * AFP_SectorSize1));
- for (i = SecFlashABegin; i < NUM_SECTORS; i++)
- info->start[i] =
- (baseaddr + SecFlashAOff +
- ((i - SecFlashABegin) * AFP_SectorSize2));
- info->size = 0x400000;
- info->sector_count = NUM_SECTORS;
- break;
- case 1:
- info->start[0] = baseaddr + SecFlashASec1Off;
- info->start[1] = baseaddr + SecFlashASec2Off;
- info->start[2] = baseaddr + SecFlashASec3Off;
- info->start[3] = baseaddr + SecFlashASec4Off;
- info->size = 0x10000;
- info->sector_count = 4;
- break;
- case 2:
- info->start[0] = baseaddr + SecFlashBSec1Off;
- info->start[1] = baseaddr + SecFlashBSec2Off;
- info->start[2] = baseaddr + SecFlashBSec3Off;
- info->start[3] = baseaddr + SecFlashBSec4Off;
- info->size = 0x10000;
- info->sector_count = 4;
- break;
- }
- return (info->size);
-}
-
-unsigned long flash_init(void)
-{
- unsigned long size_b;
- int i;
-
- size_b = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- size_b = flash_get_size(CFG_FLASH_BASE, &flash_info[0], 0);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b == 0) {
- printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b, size_b >> 20);
- }
-
- /* flash_protect (int flag, ulong from, ulong to, flash_info_t *info) */
- (void)flash_protect(FLAG_PROTECT_SET, CFG_FLASH_BASE,
- (flash_info[0].start[2] - 1), &flash_info[0]);
-#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
- (void)flash_protect(FLAG_PROTECT_SET, 0x203F0000, 0x203FFFFF,
- &flash_info[0]);
-#endif
-
- return (size_b);
-}
-
-void flash_print_info(flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id) {
- case (STM_ID_29W320EB & 0xFFFF):
- case (STM_ID_29W320DB & 0xFFFF):
- printf("ST Microelectronics ");
- break;
- default:
- printf("Unknown Vendor: (0x%08X) ", info->flash_id);
- break;
- }
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf("\n ");
- printf(" %08lX%s",
- info->start[i], info->protect[i] ? " (RO)" : " ");
- }
- printf("\n");
- return;
-}
-
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
- int cnt = 0, i;
- int prot, sect;
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect])
- prot++;
- }
- if (prot)
- printf("- Warning: %d protected sectors will not be erased!\n",
- prot);
- else
- printf("\n");
-
- cnt = s_last - s_first + 1;
-
-#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
- printf("Erasing Flash locations, Please Wait\n");
- for (i = s_first; i <= s_last; i++) {
- if (info->protect[i] == 0) { /* not protected */
- if (erase_block_flash(i) < 0) {
- printf("Error Sector erasing \n");
- return FLASH_FAIL;
- }
- }
- }
-#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
- if (cnt == FLASH_TOT_SECT) {
- printf("Erasing flash, Please Wait \n");
- if (erase_flash() < 0) {
- printf("Erasing flash failed \n");
- return FLASH_FAIL;
- }
- } else {
- printf("Erasing Flash locations, Please Wait\n");
- for (i = s_first; i <= s_last; i++) {
- if (info->protect[i] == 0) { /* not protected */
- if (erase_block_flash(i) < 0) {
- printf("Error Sector erasing \n");
- return FLASH_FAIL;
- }
- }
- }
- }
-#endif
- printf("\n");
- return FLASH_SUCCESS;
-}
-
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- int d;
- if (addr % 2) {
- read_flash(addr - 1 - CFG_FLASH_BASE, &d);
- d = (int)((d & 0x00FF) | (*src++ << 8));
- write_data(addr - 1, 2, (uchar *) & d);
- write_data(addr + 1, cnt - 1, src);
- } else
- write_data(addr, cnt, src);
- return FLASH_SUCCESS;
-}
-
-int write_data(long lStart, long lCount, uchar * pnData)
-{
- long i = 0;
- unsigned long ulOffset = lStart - CFG_FLASH_BASE;
- int d;
- int nSector = 0;
- int flag = 0;
-
- if (lCount % 2) {
- flag = 1;
- lCount = lCount - 1;
- }
-
- for (i = 0; i < lCount - 1; i += 2, ulOffset += 2) {
- get_sector_number(ulOffset, &nSector);
- read_flash(ulOffset, &d);
- if (d != 0xffff) {
- printf
- ("Flash not erased at offset 0x%x Please erase to reprogram \n",
- ulOffset);
- return FLASH_FAIL;
- }
- unlock_flash(ulOffset);
- d = (int)(pnData[i] | pnData[i + 1] << 8);
- write_flash(ulOffset, d);
- if (poll_toggle_bit(ulOffset) < 0) {
- printf("Error programming the flash \n");
- return FLASH_FAIL;
- }
- if ((i > 0) && (!(i % AFP_SectorSize2)))
- printf(".");
- }
- if (flag) {
- get_sector_number(ulOffset, &nSector);
- read_flash(ulOffset, &d);
- if (d != 0xffff) {
- printf
- ("Flash not erased at offset 0x%x Please erase to reprogram \n",
- ulOffset);
- return FLASH_FAIL;
- }
- unlock_flash(ulOffset);
- d = (int)(pnData[i] | (d & 0xFF00));
- write_flash(ulOffset, d);
- if (poll_toggle_bit(ulOffset) < 0) {
- printf("Error programming the flash \n");
- return FLASH_FAIL;
- }
- }
- return FLASH_SUCCESS;
-}
-
-int write_flash(long nOffset, int nValue)
-{
- long addr;
-
- addr = (CFG_FLASH_BASE + nOffset);
- *(unsigned volatile short *)addr = nValue;
- SSYNC();
-#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
- if (icache_status())
- udelay(CONFIG_CCLK_HZ / 1000000);
-#endif
- return FLASH_SUCCESS;
-}
-
-int read_flash(long nOffset, int *pnValue)
-{
- unsigned short *pFlashAddr =
- (unsigned short *)(CFG_FLASH_BASE + nOffset);
-
- *pnValue = *pFlashAddr;
-
- return TRUE;
-}
-
-int poll_toggle_bit(long lOffset)
-{
- unsigned int u1, u2;
- volatile unsigned long *FB =
- (volatile unsigned long *)(CFG_FLASH_BASE + lOffset);
- while (1) {
- u1 = *(volatile unsigned short *)FB;
- u2 = *(volatile unsigned short *)FB;
- u1 ^= u2;
- if (!(u1 & 0x0040))
- break;
- if (!(u2 & 0x0020))
- continue;
- else {
- u1 = *(volatile unsigned short *)FB;
- u2 = *(volatile unsigned short *)FB;
- u1 ^= u2;
- if (!(u1 & 0x0040))
- break;
- else {
- reset_flash();
- return FLASH_FAIL;
- }
- }
- }
- return FLASH_SUCCESS;
-}
-
-void reset_flash(void)
-{
- write_flash(WRITESEQ1, RESET_VAL);
- /* Wait for 10 micro seconds */
- udelay(10);
-}
-
-int erase_flash(void)
-{
- write_flash(WRITESEQ1, WRITEDATA1);
- write_flash(WRITESEQ2, WRITEDATA2);
- write_flash(WRITESEQ3, WRITEDATA3);
- write_flash(WRITESEQ4, WRITEDATA4);
- write_flash(WRITESEQ5, WRITEDATA5);
- write_flash(WRITESEQ6, WRITEDATA6);
-
- if (poll_toggle_bit(0x0000) < 0)
- return FLASH_FAIL;
-
- return FLASH_SUCCESS;
-}
-
-int erase_block_flash(int nBlock)
-{
- long ulSectorOff = 0x0;
-
- if ((nBlock < 0) || (nBlock > AFP_NumSectors))
- return FALSE;
-
- /* figure out the offset of the block in flash */
- if ((nBlock >= 0) && (nBlock < SecFlashABegin))
- ulSectorOff = nBlock * AFP_SectorSize1;
-
- else if ((nBlock >= SecFlashABegin) && (nBlock < NUM_SECTORS))
- ulSectorOff =
- SecFlashAOff + (nBlock - SecFlashABegin) * AFP_SectorSize2;
- /* no such sector */
- else
- return FLASH_FAIL;
-
- write_flash((WRITESEQ1 | ulSectorOff), WRITEDATA1);
- write_flash((WRITESEQ2 | ulSectorOff), WRITEDATA2);
- write_flash((WRITESEQ3 | ulSectorOff), WRITEDATA3);
- write_flash((WRITESEQ4 | ulSectorOff), WRITEDATA4);
- write_flash((WRITESEQ5 | ulSectorOff), WRITEDATA5);
-
- write_flash(ulSectorOff, BlockEraseVal);
-
- if (poll_toggle_bit(ulSectorOff) < 0)
- return FLASH_FAIL;
- printf(".");
-
- return FLASH_SUCCESS;
-}
-
-void unlock_flash(long ulOffset)
-{
- unsigned long ulOffsetAddr = ulOffset;
- ulOffsetAddr &= 0xFFFF0000;
-
- write_flash((WRITESEQ1 | ulOffsetAddr), UNLOCKDATA1);
- write_flash((WRITESEQ2 | ulOffsetAddr), UNLOCKDATA2);
- write_flash((WRITESEQ3 | ulOffsetAddr), UNLOCKDATA3);
-}
-
-int get_codes()
-{
- int dev_id = 0;
-
- write_flash(WRITESEQ1, GETCODEDATA1);
- write_flash(WRITESEQ2, GETCODEDATA2);
- write_flash(WRITESEQ3, GETCODEDATA3);
-
- read_flash(0x0402, &dev_id);
- dev_id &= 0x0000FFFF;
-
- reset_flash();
-
- return dev_id;
-}
-
-void get_sector_number(long ulOffset, int *pnSector)
-{
- int nSector = 0;
- long lMainEnd = 0x400000;
- long lBootEnd = 0x10000;
-
- /* sector numbers for the FLASH A boot sectors */
- if (ulOffset < lBootEnd) {
- nSector = (int)ulOffset / AFP_SectorSize1;
- }
- /* sector numbers for the FLASH B boot sectors */
- else if ((ulOffset >= lBootEnd) && (ulOffset < lMainEnd)) {
- nSector = ((ulOffset / (AFP_SectorSize2)) + 7);
- }
- /* if it is a valid sector, set it */
- if ((nSector >= 0) && (nSector < AFP_NumSectors))
- *pnSector = nSector;
-
-}
diff --git a/board/bmw/m48t59y.c b/board/bmw/m48t59y.c
index d72c861..a1a85d0 100644
--- a/board/bmw/m48t59y.c
+++ b/board/bmw/m48t59y.c
@@ -278,7 +278,7 @@
/*
* U-Boot RTC support.
*/
-void
+int
rtc_get( struct rtc_time *tmp )
{
m48_tod_get(&tmp->tm_year,
@@ -295,6 +295,8 @@
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
#endif
+
+ return 0;
}
void
diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c
index 77f7f48..a72ba46 100644
--- a/board/cray/L1/L1.c
+++ b/board/cray/L1/L1.c
@@ -177,9 +177,9 @@
/* ------------------------------------------------------------------------- */
/* stubs so we can print dates w/o any nvram RTC.*/
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
- return;
+ return 0;
}
void rtc_set (struct rtc_time *tmp)
{
diff --git a/board/etin/debris/phantom.c b/board/etin/debris/phantom.c
index 18ab500..263da6b 100644
--- a/board/etin/debris/phantom.c
+++ b/board/etin/debris/phantom.c
@@ -182,7 +182,7 @@
return flag;
}
-void rtc_get( struct rtc_time *tmp)
+int rtc_get( struct rtc_time *tmp)
{
if (phantom_flag < 0)
phantom_flag = get_phantom_flag();
@@ -250,6 +250,8 @@
tmp->tm_yday = 0;
tmp->tm_isdst= 0;
}
+
+ return 0;
}
void rtc_set( struct rtc_time *tmp )
diff --git a/board/mpc7448hpc2/Makefile b/board/freescale/mpc7448hpc2/Makefile
similarity index 100%
rename from board/mpc7448hpc2/Makefile
rename to board/freescale/mpc7448hpc2/Makefile
diff --git a/board/mpc7448hpc2/asm_init.S b/board/freescale/mpc7448hpc2/asm_init.S
similarity index 100%
rename from board/mpc7448hpc2/asm_init.S
rename to board/freescale/mpc7448hpc2/asm_init.S
diff --git a/board/mpc7448hpc2/config.mk b/board/freescale/mpc7448hpc2/config.mk
similarity index 100%
rename from board/mpc7448hpc2/config.mk
rename to board/freescale/mpc7448hpc2/config.mk
diff --git a/board/mpc7448hpc2/mpc7448hpc2.c b/board/freescale/mpc7448hpc2/mpc7448hpc2.c
similarity index 100%
rename from board/mpc7448hpc2/mpc7448hpc2.c
rename to board/freescale/mpc7448hpc2/mpc7448hpc2.c
diff --git a/board/mpc7448hpc2/tsi108_init.c b/board/freescale/mpc7448hpc2/tsi108_init.c
similarity index 100%
rename from board/mpc7448hpc2/tsi108_init.c
rename to board/freescale/mpc7448hpc2/tsi108_init.c
diff --git a/board/mpc7448hpc2/u-boot.lds b/board/freescale/mpc7448hpc2/u-boot.lds
similarity index 100%
rename from board/mpc7448hpc2/u-boot.lds
rename to board/freescale/mpc7448hpc2/u-boot.lds
diff --git a/board/mpc8260ads/Makefile b/board/freescale/mpc8260ads/Makefile
similarity index 100%
rename from board/mpc8260ads/Makefile
rename to board/freescale/mpc8260ads/Makefile
diff --git a/board/mpc8260ads/config.mk b/board/freescale/mpc8260ads/config.mk
similarity index 100%
rename from board/mpc8260ads/config.mk
rename to board/freescale/mpc8260ads/config.mk
diff --git a/board/mpc8260ads/flash.c b/board/freescale/mpc8260ads/flash.c
similarity index 100%
rename from board/mpc8260ads/flash.c
rename to board/freescale/mpc8260ads/flash.c
diff --git a/board/mpc8260ads/mpc8260ads.c b/board/freescale/mpc8260ads/mpc8260ads.c
similarity index 100%
rename from board/mpc8260ads/mpc8260ads.c
rename to board/freescale/mpc8260ads/mpc8260ads.c
diff --git a/board/mpc8266ads/Makefile b/board/freescale/mpc8266ads/Makefile
similarity index 100%
rename from board/mpc8266ads/Makefile
rename to board/freescale/mpc8266ads/Makefile
diff --git a/board/mpc8266ads/config.mk b/board/freescale/mpc8266ads/config.mk
similarity index 100%
rename from board/mpc8266ads/config.mk
rename to board/freescale/mpc8266ads/config.mk
diff --git a/board/mpc8266ads/flash.c b/board/freescale/mpc8266ads/flash.c
similarity index 100%
rename from board/mpc8266ads/flash.c
rename to board/freescale/mpc8266ads/flash.c
diff --git a/board/mpc8266ads/mpc8266ads.c b/board/freescale/mpc8266ads/mpc8266ads.c
similarity index 100%
rename from board/mpc8266ads/mpc8266ads.c
rename to board/freescale/mpc8266ads/mpc8266ads.c
diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c
index 42019fb..7cbdb7b 100644
--- a/board/freescale/mpc8313erdb/mpc8313erdb.c
+++ b/board/freescale/mpc8313erdb/mpc8313erdb.c
@@ -28,6 +28,7 @@
#endif
#include <pci.h>
#include <mpc83xx.h>
+#include <vsc7385.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -98,6 +99,26 @@
mpc83xx_pci_init(1, reg, warmboot);
}
+/*
+ * Miscellaneous late-boot configurations
+ *
+ * If a VSC7385 microcode image is present, then upload it.
+*/
+int misc_init_r(void)
+{
+ int rc = 0;
+
+#ifdef CONFIG_VSC7385_IMAGE
+ if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
+ CONFIG_VSC7385_IMAGE_SIZE)) {
+ puts("Failure uploading VSC7385 microcode.\n");
+ rc = 1;
+ }
+#endif
+
+ return rc;
+}
+
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c
index 972361f..704f963 100644
--- a/board/freescale/mpc8349itx/mpc8349itx.c
+++ b/board/freescale/mpc8349itx/mpc8349itx.c
@@ -25,6 +25,7 @@
#include <mpc83xx.h>
#include <i2c.h>
#include <miiphy.h>
+#include <vsc7385.h>
#ifdef CONFIG_PCI
#include <asm/mpc8349_pci.h>
#include <pci.h>
@@ -177,7 +178,7 @@
*/
int misc_init_f(void)
{
-#ifdef CONFIG_VSC7385
+#ifdef CONFIG_VSC7385_ENET
volatile u32 *vsc7385_cpuctrl;
/* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up
@@ -239,6 +240,8 @@
}
/*
+ * Miscellaneous late-boot configurations
+ *
* Make sure the EEPROM has the HRCW correctly programmed.
* Make sure the RTC is correctly programmed.
*
@@ -250,6 +253,8 @@
*
* This function makes sure that the I2C EEPROM is programmed
* correctly.
+ *
+ * If a VSC7385 microcode image is present, then upload it.
*/
int misc_init_r(void)
{
@@ -375,6 +380,14 @@
i2c_set_bus_num(orig_bus);
#endif
+#ifdef CONFIG_VSC7385_IMAGE
+ if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
+ CONFIG_VSC7385_IMAGE_SIZE)) {
+ puts("Failure uploading VSC7385 microcode.\n");
+ rc = 1;
+ }
+#endif
+
return rc;
}
diff --git a/board/freescale/mpc8360erdk/Makefile b/board/freescale/mpc8360erdk/Makefile
index acc9544..53e0c48 100644
--- a/board/freescale/mpc8360erdk/Makefile
+++ b/board/freescale/mpc8360erdk/Makefile
@@ -25,8 +25,10 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
+COBJS-y += $(BOARD).o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
+COBJS := $(COBJS-y)
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
diff --git a/board/freescale/mpc8360erdk/mpc8360erdk.c b/board/freescale/mpc8360erdk/mpc8360erdk.c
index 8005a50..3bcdda7 100644
--- a/board/freescale/mpc8360erdk/mpc8360erdk.c
+++ b/board/freescale/mpc8360erdk/mpc8360erdk.c
@@ -186,6 +186,23 @@
{1, 7, 1, 0, 0}, /* LVDS_BKLT_CTR */
{2, 16, 1, 0, 0}, /* LVDS_BKLT_EN */
+ /* AD7843 ADC/Touchscreen controller */
+ {4, 14, 1, 0, 0}, /* SPI_nCS0 */
+ {4, 28, 3, 0, 3}, /* SPI_MOSI */
+ {4, 29, 3, 0, 3}, /* SPI_MISO */
+ {4, 30, 3, 0, 3}, /* SPI_CLK */
+
+ /* Freescale QUICC Engine USB Host Controller (FHCI) */
+ {1, 2, 1, 0, 3}, /* USBOE */
+ {1, 3, 1, 0, 3}, /* USBTP */
+ {1, 8, 1, 0, 1}, /* USBTN */
+ {1, 9, 2, 1, 3}, /* USBRP */
+ {1, 10, 2, 0, 3}, /* USBRXD */
+ {1, 11, 2, 1, 3}, /* USBRN */
+ {2, 20, 2, 0, 1}, /* CLK21 */
+ {4, 20, 1, 0, 0}, /* SPEED */
+ {4, 21, 1, 0, 0}, /* SUSPND */
+
/* END of table */
{0, 0, 0, 0, QE_IOP_TAB_END},
};
diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c
new file mode 100644
index 0000000..e1e790b
--- /dev/null
+++ b/board/freescale/mpc8360erdk/nand.c
@@ -0,0 +1,72 @@
+/*
+ * MPC8360E-RDK support for the NAND on FSL UPM
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_83xx.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/fsl_upm.h>
+#include <nand.h>
+
+static struct immap *im = (struct immap *)CFG_IMMR;
+
+static const u32 upm_array[] = {
+ 0x0ff03c30, 0x0ff03c30, 0x0ff03c34, 0x0ff33c30, /* Words 0 to 3 */
+ 0xfff33c31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 4 to 7 */
+ 0x0faf3c30, 0x0faf3c30, 0x0faf3c30, 0x0fff3c34, /* Words 8 to 11 */
+ 0xffff3c31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 12 to 15 */
+ 0x0fa3fc30, 0x0fa3fc30, 0x0fa3fc30, 0x0ff3fc34, /* Words 16 to 19 */
+ 0xfff3fc31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 20 to 23 */
+ 0x0ff33c30, 0x0fa33c30, 0x0fa33c34, 0x0ff33c30, /* Words 24 to 27 */
+ 0xfff33c31, 0xfff0fc30, 0xfff0fc30, 0xfff0fc30, /* Words 28 to 31 */
+ 0xfff3fc30, 0xfff3fc30, 0xfff6fc30, 0xfffcfc30, /* Words 32 to 35 */
+ 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, /* Words 36 to 39 */
+ 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, /* Words 40 to 43 */
+ 0xfffdfc30, 0xfffffc30, 0xfffffc30, 0xfffffc31, /* Words 44 to 47 */
+ 0xfffffc30, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 48 to 51 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 52 to 55 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 56 to 59 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 60 to 63 */
+};
+
+static int dev_ready(void)
+{
+ if (in_be32(&im->qepio.ioport[4].pdat) & 0x00002000) {
+ debug("nand ready\n");
+ return 1;
+ }
+
+ debug("nand busy\n");
+ return 0;
+}
+
+static struct fsl_upm_nand fun = {
+ .upm = {
+ .array = upm_array,
+ .io_addr = (void *)CFG_NAND_BASE,
+ },
+ .width = 1,
+ .upm_cmd_offset = 8,
+ .upm_addr_offset = 16,
+ .dev_ready = dev_ready,
+ .wait_pattern = 1,
+ .chip_delay = 50,
+};
+
+int board_nand_init(struct nand_chip *nand)
+{
+ fun.upm.mxmr = &im->lbus.mamr;
+ fun.upm.mdr = &im->lbus.mdr;
+ fun.upm.mar = &im->lbus.mar;
+ return fsl_upm_nand_init(nand, &fun);
+}
diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c
index bed0fc3..83fb60d 100644
--- a/board/freescale/mpc837xerdb/mpc837xerdb.c
+++ b/board/freescale/mpc837xerdb/mpc837xerdb.c
@@ -15,7 +15,10 @@
#include <common.h>
#include <i2c.h>
#include <asm/io.h>
+#include <asm/fsl_serdes.h>
#include <spd_sdram.h>
+#include <vsc7385.h>
+
#if defined(CFG_DRAM_TEST)
int
@@ -56,11 +59,6 @@
}
#endif
-int board_early_init_f(void)
-{
- return 0;
-}
-
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
void ddr_enable_ecc(unsigned int dram_size);
#endif
@@ -135,6 +133,62 @@
return 0;
}
+int board_early_init_f(void)
+{
+#ifdef CONFIG_FSL_SERDES
+ immap_t *immr = (immap_t *)CFG_IMMR;
+ u32 spridr = in_be32(&immr->sysconf.spridr);
+
+ /* we check only part num, and don't look for CPU revisions */
+ switch (spridr >> 16) {
+ case SPR_8379E_REV10 >> 16:
+ case SPR_8379_REV10 >> 16:
+ fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ break;
+ case SPR_8378E_REV10 >> 16:
+ case SPR_8378_REV10 >> 16:
+ fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ break;
+ case SPR_8377E_REV10 >> 16:
+ case SPR_8377_REV10 >> 16:
+ fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ break;
+ default:
+ printf("serdes not configured: unknown CPU part number: "
+ "%04x\n", spridr >> 16);
+ break;
+ }
+#endif /* CONFIG_FSL_SERDES */
+ return 0;
+}
+
+/*
+ * Miscellaneous late-boot configurations
+ *
+ * If a VSC7385 microcode image is present, then upload it.
+*/
+int misc_init_r(void)
+{
+ int rc = 0;
+
+#ifdef CONFIG_VSC7385_IMAGE
+ if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
+ CONFIG_VSC7385_IMAGE_SIZE)) {
+ puts("Failure uploading VSC7385 microcode.\n");
+ rc = 1;
+ }
+#endif
+
+ return rc;
+}
+
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
@@ -143,5 +197,6 @@
ft_pci_setup(blob, bd);
#endif
ft_cpu_setup(blob, bd);
+ fdt_fixup_dr_usb(blob, bd);
}
#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/hmi1001/hmi1001.c b/board/hmi1001/hmi1001.c
index 9fa0e74..8bdfe78 100644
--- a/board/hmi1001/hmi1001.c
+++ b/board/hmi1001/hmi1001.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2003-2004
+ * (C) Copyright 2003-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2004
@@ -30,6 +30,7 @@
#include <common.h>
#include <mpc5xxx.h>
#include <pci.h>
+#include <asm/processor.h>
#include <malloc.h>
#ifndef CFG_RAMBOOT
@@ -84,6 +85,7 @@
ulong dramsize = 0;
#ifndef CFG_RAMBOOT
ulong test1, test2;
+ uint svr, pvr;
/* setup SDRAM chip selects */
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */
@@ -147,6 +149,24 @@
#endif /* CFG_RAMBOOT */
+ /*
+ * On MPC5200B we need to set the special configuration delay in the
+ * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+ * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+ *
+ * "The SDelay should be written to a value of 0x00000004. It is
+ * required to account for changes caused by normal wafer processing
+ * parameters."
+ */
+ svr = get_svr();
+ pvr = get_pvr();
+ if ((SVR_MJREV(svr) >= 2) &&
+ (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
+
+ *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+ __asm__ volatile ("sync");
+ }
+
/* return dramsize + dramsize2; */
return dramsize;
}
diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c
index dbf0ecc..c624b3d 100644
--- a/board/incaip/incaip.c
+++ b/board/incaip/incaip.c
@@ -26,9 +26,15 @@
#include <asm/addrspace.h>
#include <asm/inca-ip.h>
#include <asm/io.h>
+#include <asm/reboot.h>
extern uint incaip_get_cpuclk(void);
+void _machine_restart(void)
+{
+ *INCA_IP_WDT_RST_REQ = 0x3f;
+}
+
static ulong max_sdram_size(void)
{
/* The only supported SDRAM data width is 16bit.
diff --git a/board/incaip/lowlevel_init.S b/board/incaip/lowlevel_init.S
index 14d738a..b39f93d 100644
--- a/board/incaip/lowlevel_init.S
+++ b/board/incaip/lowlevel_init.S
@@ -276,6 +276,12 @@
.ent lowlevel_init
lowlevel_init:
+ /* Disable Watchdog.
+ */
+ la t9, disable_incaip_wdt
+ jalr t9
+ nop
+
/* EBU, CGU and SDRAM Initialization.
*/
li a0, CPU_CLOCK_RATE
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index 815c01f..e5fa259 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -96,6 +96,25 @@
gpio_write_bit(CFG_GPIO_FLASH_WP, 1);
+#if CONFIG_POST & CFG_POST_BSPEC1
+ gpio_write_bit(CFG_GPIO_HIGHSIDE, 1);
+
+ reg = 0; /* reuse as counter */
+ out_be32((void *)CFG_DSPIC_TEST_ADDR,
+ in_be32((void *)CFG_DSPIC_TEST_ADDR)
+ & ~CFG_DSPIC_TEST_MASK);
+ while (!gpio_read_in_bit(CFG_GPIO_DSPIC_READY) && reg++ < 1000) {
+ udelay(1000);
+ }
+ gpio_write_bit(CFG_GPIO_HIGHSIDE, 0);
+ if (gpio_read_in_bit(CFG_GPIO_DSPIC_READY)) {
+ /* set "boot error" flag */
+ out_be32((void *)CFG_DSPIC_TEST_ADDR,
+ in_be32((void *)CFG_DSPIC_TEST_ADDR) |
+ CFG_DSPIC_TEST_MASK);
+ }
+#endif
+
/*
* Reset PHY's:
* The PHY's need a 2nd reset pulse, since the MDIO address is latched
@@ -548,11 +567,13 @@
return CFG_LIME_BASE_0;
}
-void board_backlight_switch (int flag)
+#define DEFAULT_BRIGHTNESS 0x64
+
+static void board_backlight_brightness(int brightness)
{
- if (flag) {
+ if (brightness > 0) {
/* pwm duty, lamp on */
- out_be32((void *)(CFG_FPGA_BASE_0 + 0x00000024), 0x64);
+ out_be32((void *)(CFG_FPGA_BASE_0 + 0x00000024), brightness);
out_be32((void *)(CFG_FPGA_BASE_0 + 0x00000020), 0x701);
} else {
/* lamp off */
@@ -561,6 +582,22 @@
}
}
+void board_backlight_switch (int flag)
+{
+ char * param;
+ int rc;
+
+ if (flag) {
+ param = getenv("brightness");
+ rc = param ? simple_strtol(param, NULL, 10) : -1;
+ if (rc < 0)
+ rc = DEFAULT_BRIGHTNESS;
+ } else {
+ rc = 0;
+ }
+ board_backlight_brightness(rc);
+}
+
#if defined(CONFIG_CONSOLE_EXTRA_INFO)
/*
* Return text to be printed besides the logo.
@@ -575,3 +612,8 @@
}
#endif
#endif /* CONFIG_VIDEO */
+
+void board_reset(void)
+{
+ gpio_write_bit(CFG_GPIO_BOARD_RESET, 1);
+}
diff --git a/board/mousse/m48t59y.c b/board/mousse/m48t59y.c
index 37a6244..2c1e6cf 100644
--- a/board/mousse/m48t59y.c
+++ b/board/mousse/m48t59y.c
@@ -278,7 +278,7 @@
/*
* U-Boot RTC support.
*/
-void
+int
rtc_get( struct rtc_time *tmp )
{
m48_tod_get(&tmp->tm_year,
@@ -295,6 +295,8 @@
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
#endif
+
+ return 0;
}
void
diff --git a/board/netstal/common/hcu_flash.c b/board/netstal/common/hcu_flash.c
deleted file mode 100644
index d0322f2..0000000
--- a/board/netstal/common/hcu_flash.c
+++ /dev/null
@@ -1,514 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-#if CFG_MAX_FLASH_BANKS != 1
-#error "CFG_MAX_FLASH_BANKS must be 1"
-#endif
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info);
-static int write_word (flash_info_t * info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-
-/*-----------------------------------------------------------------------*/
-
-unsigned long flash_init (void)
-{
- unsigned long size_b0;
-
- /* Init: no FLASHes known */
- flash_info[0].flash_id = FLASH_UNKNOWN;
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size ((vu_long *) FLASH_BASE0_PRELIM,
- &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0- Size=0x%08lx=%ld MB\n",
- size_b0, size_b0 << 20);
- }
-
- /* Only one bank */
- /* Setup offsets */
- flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
-
- /* Monitor protection ON by default */
- (void) flash_protect (FLAG_PROTECT_SET,
- FLASH_BASE0_PRELIM,
- FLASH_BASE0_PRELIM + monitor_flash_len - 1,
- &flash_info[0]);
- flash_info[0].size = size_b0;
-
- return size_b0;
-}
-
-
-/*-----------------------------------------------------------------------*/
-/*
- * This implementation assumes that the flash chips are uniform sector
- * devices. This is true for all likely flash devices on a HCUx.
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- unsigned idx;
- unsigned long sector_size = info->size / info->sector_count;
-
- for (idx = 0; idx < info->sector_count; idx += 1) {
- info->start[idx] = base + (idx * sector_size);
- }
-}
-
-/*-----------------------------------------------------------------------*/
-void flash_print_info (flash_info_t * info)
-{
- int i;
- int k;
- int size;
- int erased;
- volatile unsigned long *flash;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf ("AMD ");
- break;
- case FLASH_MAN_FUJ:
- printf ("FUJITSU ");
- break;
- case FLASH_MAN_SST:
- printf ("SST ");
- break;
- case FLASH_MAN_STM:
- printf ("ST Micro ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- /* (Reduced table of only parts expected in HCUx boards.) */
- switch (info->flash_id) {
- case FLASH_MAN_AMD | FLASH_AM040:
- printf ("AM29F040 (512 Kbit, uniform sector size)\n");
- break;
- case FLASH_MAN_STM | FLASH_AM040:
- printf ("MM29W040W (512 Kbit, uniform sector size)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- /*
- * Check if whole sector is erased
- */
- if (i != (info->sector_count - 1))
- size = info->start[i + 1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
- erased = 1;
- flash = (volatile unsigned long *) info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k = 0; k < size; k++) {
- if (*flash++ != 0xffffffff) {
- erased = 0;
- break;
- }
- }
-
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s%s",
- info->start[i],
- erased ? " E" : " ", info->protect[i] ? "RO " : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------*/
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info)
-{
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong) addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
-
- /* Write auto select command: read Manufacturer ID */
- asm("isync");
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- asm("isync");
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- asm("isync");
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00900090;
- asm("isync");
-
- value = addr2[0];
- asm("isync");
-
- switch (value) {
- case (FLASH_WORD_SIZE) AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FLASH_WORD_SIZE) FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (FLASH_WORD_SIZE) SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- case (FLASH_WORD_SIZE)STM_MANUFACT:
- info->flash_id = FLASH_MAN_STM;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- printf("Unknown flash manufacturer code: 0x%x at %p\n",
- value, addr);
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0;
- return (0); /* no or unknown flash */
- }
-
- value = addr2[1]; /* device ID */
-
- switch (value) {
- case (FLASH_WORD_SIZE) AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE) AMD_ID_LV040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE)STM_ID_M29W040B: /* most likele HCU5 chip */
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* Calculate the sector offsets (Use HCUx Optimized code). */
- flash_get_offsets(base, info);
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address,
- *(A7 .. A0) = 0x02
- * D0 = 1 if protected
- */
- addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr2 = (FLASH_WORD_SIZE *) info->start[0];
- *addr2 = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
- }
-
- return (info->size);
-}
-
-int wait_for_DQ7 (flash_info_t * info, int sect)
-{
- ulong start, now, last;
- volatile FLASH_WORD_SIZE *addr =
- (FLASH_WORD_SIZE *) (info->start[sect]);
-
- start = get_timer (0);
- last = start;
- while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
- (FLASH_WORD_SIZE) 0x00800080) {
- if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return -1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
- return 0;
-}
-
-/*-----------------------------------------------------------------------*/
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *addr2;
- int flag, prot, sect, l_sect;
- int i;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors not erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
- printf ("Erasing sector %p\n", addr2); /* CLH */
-
- if ((info->flash_id & FLASH_VENDMASK) ==
- FLASH_MAN_SST) {
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- /* block erase */
- addr2[0] = (FLASH_WORD_SIZE) 0x00500050;
- for (i = 0; i < 50; i++) udelay (1000);
- } else {
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- /* sector erase */
- addr2[0] = (FLASH_WORD_SIZE) 0x00300030;
- }
- l_sect = sect;
- /*
- * Wait for each sector to complete, it's more
- * reliable. According to AMD Spec, you must
- * issue all erase commands within a specified
- * timeout. This has been seen to fail, especially
- * if printf()s are included (for debug)!!
- */
- wait_for_DQ7 (info, sect);
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
- wait_for_DQ7 (info, l_sect);
-
-DONE:
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i = 0; i < 4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_word (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 =
- (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
- ulong start;
- int i;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *) dest) &
- (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
- return (2);
- }
-
- for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
- int flag;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
- dest2[i] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
diff --git a/board/netstal/hcu4/Makefile b/board/netstal/hcu4/Makefile
index 3d1d65d..53df61e 100644
--- a/board/netstal/hcu4/Makefile
+++ b/board/netstal/hcu4/Makefile
@@ -23,7 +23,7 @@
LIB = $(obj)lib$(BOARD).a
# NOBJS : Netstal common objects
-NOBJS = fixed_sdram.o hcu_flash.o nm_bsp.o
+NOBJS = fixed_sdram.o nm_bsp.o
COBJS = $(BOARD).o
SOBJS =
diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c
index bb610e2..dc526fc 100644
--- a/board/netstal/hcu4/hcu4.c
+++ b/board/netstal/hcu4/hcu4.c
@@ -201,3 +201,18 @@
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+/*
+ * Hardcoded flash setup:
+ * Flash 0 is a non-CFI AMD AM29F040 flash, 8 bit flash / 8 bit bus.
+ */
+ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
+{
+ if (banknum == 0) { /* non-CFI boot flash */
+ info->portwidth = 1;
+ info->chipwidth = 1;
+ info->interface = FLASH_CFI_X8;
+ return 1;
+ } else
+ return 0;
+}
diff --git a/board/netstal/hcu5/Makefile b/board/netstal/hcu5/Makefile
index 349c653..5ffae65 100644
--- a/board/netstal/hcu5/Makefile
+++ b/board/netstal/hcu5/Makefile
@@ -24,7 +24,7 @@
# NOBJS : Netstal common objects
-NOBJS = hcu_flash.o nm_bsp.o
+NOBJS = nm_bsp.o
COBJS = $(BOARD).o sdram.o
SOBJS = init.o
diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c
index c494e93..55e4cc6 100644
--- a/board/netstal/hcu5/hcu5.c
+++ b/board/netstal/hcu5/hcu5.c
@@ -499,3 +499,18 @@
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+/*
+ * Hardcoded flash setup:
+ * Flash 0 is a non-CFI AMD AM29F040 flash, 8 bit flash / 8 bit bus.
+ */
+ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
+{
+ if (banknum == 0) { /* non-CFI boot flash */
+ info->portwidth = 1;
+ info->chipwidth = 1;
+ info->interface = FLASH_CFI_X8;
+ return 1;
+ } else
+ return 0;
+}
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c
index d3c2233..0b16b505 100644
--- a/board/netstal/hcu5/sdram.c
+++ b/board/netstal/hcu5/sdram.c
@@ -70,8 +70,6 @@
#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE
/* disable caching on DDR2 */
-void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
-
void board_add_ram_info(int use_default)
{
PPC4xx_SYS_INFO board_cfg;
diff --git a/board/netstal/mcu25/Makefile b/board/netstal/mcu25/Makefile
new file mode 100644
index 0000000..53df61e
--- /dev/null
+++ b/board/netstal/mcu25/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007-2008 Netstal Maschinen AG
+# Niklaus Giger (ng@netstal.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+# NOBJS : Netstal common objects
+NOBJS = fixed_sdram.o nm_bsp.o
+COBJS = $(BOARD).o
+SOBJS =
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) $(addprefix ../common/,$(NOBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(COBJS))
+NOBJS := $(addprefix $(obj)../common/,$(NOBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS) $(NOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(NOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/netstal/mcu25/README.txt b/board/netstal/mcu25/README.txt
new file mode 100644
index 0000000..d25fddd
--- /dev/null
+++ b/board/netstal/mcu25/README.txt
@@ -0,0 +1,59 @@
+MCU25 Configuration Details
+
+Memory Bank 0 -- Flash chip
+---------------------------
+
+0xfff00000 - 0xffffffff
+
+The flash chip is really only 512Kbytes, but the high address bit of
+the 1Meg region is ignored, so the flash is replicated through the
+region. Thus, this is consistent with a flash base address 0xfff80000.
+
+The placement at the end is to be consistent with reset behavior,
+where the processor itself initially uses this bus to load the branch
+vector and start running.
+
+On-Chip Memory
+--------------
+
+0xf4000000 - 0xf4000fff
+
+The 405GPr includes a 4K on-chip memory that can be placed however
+software chooses. I choose to place the memory at this address, to
+keep it out of the cachable areas.
+
+
+Internal Peripherals
+--------------------
+
+0xef600300 - 0xef6008ff
+
+These are scattered various peripherals internal to the PPC405GPr
+chip.
+
+Chip-Select 2: Flash Memory
+---------------------------
+
+0x70000000
+
+Chip-Select 3: CAN Interface
+----------------------------
+0x7800000
+
+
+Chip-Select 4: IMC-bus standard
+-------------------------------
+
+Our IO-Bus (slow version)
+
+
+Chip-Select 5: IMC-bus fast (inactive)
+--------------------------------------
+
+Our IO-Bus (fast, but not yet use)
+
+
+Memory Bank 1 -- SDRAM
+-------------------------------------
+
+0x00000000 - 0x2ffffff # Default 64 MB
diff --git a/board/netstal/mcu25/config.mk b/board/netstal/mcu25/config.mk
new file mode 100644
index 0000000..f0f2ea1
--- /dev/null
+++ b/board/netstal/mcu25/config.mk
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2005 Netstal Maschinen AG
+# Niklaus Giger (ng@netstal.com)
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Netstal Maschinen AG: MCU25 board
+#
+TEXT_BASE = 0xFFFB0000
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG -g
+endif
diff --git a/board/netstal/mcu25/mcu25.c b/board/netstal/mcu25/mcu25.c
new file mode 100644
index 0000000..2b21444
--- /dev/null
+++ b/board/netstal/mcu25/mcu25.c
@@ -0,0 +1,217 @@
+/*
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ * This source code is free software; you can redistribute it
+ * and/or modify it in source code form under the terms of the GNU
+ * General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm-ppc/u-boot.h>
+#include "../common/nm.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MCU25_SLOT_ADDRESS (0x7A000000 + 0x0A)
+#define MCU25_DIGITAL_IO_REGISTER (0x7A000000 + 0xc0)
+
+#define MCU25_LED_REGISTER_ADDRESS (0x7C000000 + 0x10)
+#define MCU25_VERSIONS_REGISTER (0x7C000000 + 0x0C)
+#define MCU25_IO_CONFIGURATION (0x7C000000 + 0x0e)
+#define MCU_SW_INSTALL_REQUESTED 0x08
+
+#define SDRAM_LEN (32 << 20) /* 32 MB - RAM */
+
+/*
+ * This function is run very early, out of flash, and before devices are
+ * initialized. It is called by lib_ppc/board.c:board_init_f by virtue
+ * of being in the init_sequence array.
+ *
+ * The SDRAM has been initialized already -- start.S:start called
+ * init.S:init_sdram early on -- but it is not yet being used for
+ * anything, not even stack. So be careful.
+ */
+
+/* Attention: If you want 1 microsecs times from the external oscillator
+ * 0x00004051 is okay for u-boot/linux, but different from old vxworks values
+ * 0x00804051 causes problems with u-boot and linux!
+ */
+#define CPC0_CR0_VALUE 0x0007F03C
+#define CPC0_CR1_VALUE 0x00004051
+
+int board_early_init_f (void)
+{
+ /* Documented in A-1171
+ *
+ * Interrupt controller setup for the MCU25 board.
+ * Note: IRQ 0-15 405GP internally generated; high; level sensitive
+ * IRQ 16 405GP internally generated; low; level sensitive
+ * IRQ 17-24 RESERVED/UNUSED
+ * IRQ 31 (EXT IRQ 6) (unused)
+ */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000); /* set all to be non-critical */
+ mtdcr(uicpr, 0xFFFFE000); /* set int polarities */
+ mtdcr(uictr, 0x00000000); /* set int trigger levels */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ mtdcr(cntrl1, CPC0_CR1_VALUE);
+ mtdcr(ecr, 0x60606000);
+ mtdcr(CPC0_EIRR, 0x7C000000);
+ out32(GPIO0_OR, CFG_GPIO0_OR );
+ out32(GPIO0_TCR, CFG_GPIO0_TCR);
+ out32(GPIO0_ODR, CFG_GPIO0_ODR);
+ mtspr(ccr0, 0x00700000);
+
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_PRE_INIT
+int board_pre_init (void)
+{
+ return board_early_init_f ();
+}
+#endif
+
+int sys_install_requested(void)
+{
+ u16 ioValue = in_be16((u16 *)MCU25_DIGITAL_IO_REGISTER);
+ return (ioValue & MCU_SW_INSTALL_REQUESTED) != 0;
+}
+
+int checkboard (void)
+{
+ u16 boardVersReg = in_be16((u16 *)MCU25_VERSIONS_REGISTER);
+ u16 hwConfig = in_be16((u16 *)MCU25_IO_CONFIGURATION);
+ u16 generation = boardVersReg & 0x0f;
+ u16 index = boardVersReg & 0xf0;
+
+ /* Cannot be done in board_early_init */
+ mtdcr(cntrl0, CPC0_CR0_VALUE);
+
+ /* Force /RTS to active. The board it not wired quite
+ * correctly to use cts/rtc flow control, so just force the
+ * /RST active and forget about it.
+ */
+ writeb (readb (0xef600404) | 0x03, 0xef600404);
+ nm_show_print(generation, index, hwConfig);
+ return 0;
+}
+
+u32 hcu_led_get(void)
+{
+ return in_be16((u16 *)MCU25_LED_REGISTER_ADDRESS) & 0x3ff;
+}
+
+/*
+ * hcu_led_set value to be placed into the LEDs (max 6 bit)
+ */
+void hcu_led_set(u32 value)
+{
+ out_be16((u16 *)MCU25_LED_REGISTER_ADDRESS, value);
+}
+
+/*
+ * sdram_init - Dummy implementation for start.S, spd_sdram or initdram
+ * used for HCUx
+ */
+void sdram_init(void)
+{
+ return;
+}
+
+/*
+ * hcu_get_slot
+ */
+u32 hcu_get_slot(void)
+{
+ u16 slot = in_be16((u16 *)MCU25_SLOT_ADDRESS);
+ return slot & 0x7f;
+}
+
+/*
+ * get_serial_number
+ */
+u32 get_serial_number(void)
+{
+ u32 serial = in_be32((u32 *)CFG_FLASH_BASE);
+
+ if (serial == 0xffffffff)
+ return 0;
+
+ return serial;
+}
+
+
+/*
+ * misc_init_r.
+ */
+
+int misc_init_r(void)
+{
+ common_misc_init_r();
+ set_params_for_sw_install( sys_install_requested(), "mcu25" );
+ return 0;
+}
+
+long int initdram(int board_type)
+{
+ unsigned int dram_size = 64*1024*1024;
+ init_ppc405_sdram(dram_size);
+
+#ifdef DEBUG
+ show_sdram_registers();
+#endif
+
+ return dram_size;
+}
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ return 0; /* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+/*
+ * Hardcoded flash setup:
+ * Flash 0 is a non-CFI AMD AM29F040 flash, 8 bit flash / 8 bit bus.
+ */
+ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
+{
+ if (banknum == 0) { /* non-CFI boot flash */
+ info->portwidth = 1;
+ info->chipwidth = 1;
+ info->interface = FLASH_CFI_X8;
+ return 1;
+ } else
+ return 0;
+}
diff --git a/board/netstal/mcu25/u-boot.lds b/board/netstal/mcu25/u-boot.lds
new file mode 100644
index 0000000..b6e28f8
--- /dev/null
+++ b/board/netstal/mcu25/u-boot.lds
@@ -0,0 +1,140 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text : {
+ /* The start.o file includes the initial jump vector that
+ must be located in the beginning. It is the basic run-
+ time function that calls all other functions. */
+ cpu/ppc4xx/start.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/purple/purple.c b/board/purple/purple.c
index 74718af..13a1455 100644
--- a/board/purple/purple.c
+++ b/board/purple/purple.c
@@ -29,6 +29,7 @@
#include <asm/io.h>
#include <asm/addrspace.h>
#include <asm/cacheops.h>
+#include <asm/reboot.h>
#include "sconsole.h"
@@ -52,6 +53,13 @@
extern int asc_serial_tstc (void);
extern void asc_serial_setbrg (void);
+void _machine_restart(void)
+{
+ void (*f)(void) = (void *) 0xbfc00000;
+
+ f();
+}
+
static void sdram_timing_init (ulong size)
{
register uint pass;
diff --git a/board/tb0229/tb0229.c b/board/tb0229/tb0229.c
index 61c2e9b..d08b422 100644
--- a/board/tb0229/tb0229.c
+++ b/board/tb0229/tb0229.c
@@ -12,10 +12,17 @@
#include <common.h>
#include <command.h>
#include <asm/addrspace.h>
-#include <asm/inca-ip.h>
#include <asm/io.h>
+#include <asm/reboot.h>
#include <pci.h>
+void _machine_restart(void)
+{
+ void (*f)(void) = (void *) 0xbfc00000;
+
+ f();
+}
+
#if defined(CONFIG_PCI)
static struct pci_controller hose;
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 33ad2a3..e67145e 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -104,7 +104,6 @@
* is something else than 0x00000000.
*/
-#if defined(CONFIG_MPC5200)
long int initdram (int board_type)
{
ulong dramsize = 0;
@@ -230,57 +229,6 @@
#endif /* CONFIG_TQM5200_B */
}
-#elif defined(CONFIG_MGT5100)
-
-long int initdram (int board_type)
-{
- ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
- ulong test1, test2;
-
- /* setup and enable SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
- *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
- /* address select register */
- *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
- __asm__ volatile ("sync");
-
- /* find RAM size */
- sdram_start(0);
- test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
- sdram_start(1);
- test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* set SDRAM end address according to size */
- *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CFG_RAMBOOT */
-
- /* Retrieve amount of SDRAM available */
- dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CFG_RAMBOOT */
-
- return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
int checkboard (void)
{
#if defined(CONFIG_AEVFIFO)
@@ -323,10 +271,6 @@
* Note that CS_BOOT cannot be cleared when
* executing in flash.
*/
-#if defined(CONFIG_MGT5100)
- *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-#endif
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
diff --git a/common/Makefile b/common/Makefile
index fc84222..1c81fcf 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -39,9 +39,11 @@
COBJS-y += image.o
COBJS-y += gunzip.o
COBJS-y += cmd_boot.o
+COBJS-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o
COBJS-y += cmd_bootm.o
COBJS-$(CONFIG_CMD_CACHE) += cmd_cache.o
COBJS-$(CONFIG_CMD_CONSOLE) += cmd_console.o
+COBJS-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o
COBJS-$(CONFIG_CMD_DATE) += cmd_date.o
ifdef CONFIG_4xx
COBJS-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o
@@ -88,6 +90,7 @@
COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o
COBJS-y += cmd_sata.o
COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o
+COBJS-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o
COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o
COBJS-$(CONFIG_CMD_STRINGS) += cmd_strings.o
COBJS-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o
diff --git a/common/cmd_bootldr.c b/common/cmd_bootldr.c
new file mode 100644
index 0000000..e6474aa
--- /dev/null
+++ b/common/cmd_bootldr.c
@@ -0,0 +1,64 @@
+/*
+ * U-boot - bootldr.c
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/bootrom.h>
+
+/*
+ * the bootldr command loads an address, checks to see if there
+ * is a Boot stream that the on-chip BOOTROM can understand,
+ * and loads it via the BOOTROM Callback. It is possible
+ * to also add booting from SPI, or TWI, but this function does
+ * not currently support that.
+ */
+
+int do_bootldr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ void *addr;
+ uint32_t *data;
+
+ /* Get the address */
+ if (argc < 2)
+ addr = (void *)load_addr;
+ else
+ addr = (void *)simple_strtoul(argv[1], NULL, 16);
+
+ /* Check if it is a LDR file */
+ data = addr;
+#if defined(__ADSPBF54x__) || defined(__ADSPBF52x__)
+ if ((*data & 0xFF000000) == 0xAD000000 && data[2] == 0x00000000) {
+#else
+ if (*data == 0xFF800060 || *data == 0xFF800040 || *data == 0xFF800020) {
+#endif
+ /* We want to boot from FLASH or SDRAM */
+ printf("## Booting ldr image at 0x%p ...\n", addr);
+
+ icache_disable();
+ dcache_disable();
+
+ __asm__(
+ "jump (%1);"
+ :
+ : "q7" (addr), "a" (_BOOTROM_MEMBOOT));
+ } else
+ printf("## No ldr image at address 0x%p\n", addr);
+
+ return 0;
+}
+
+U_BOOT_CMD(bootldr, 2, 0, do_bootldr,
+ "bootldr - boot ldr image from memory\n",
+ "[addr]\n"
+ " - boot ldr image stored in memory\n");
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 789ee03..9e5ce4b 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -427,6 +427,17 @@
}
show_boot_progress (105);
+#ifdef CONFIG_LOGBUFFER
+#ifndef CONFIG_ALT_LB_ADDR
+ kbd=gd->bd;
+ /* Prevent initrd from overwriting logbuffer */
+ if (initrd_high < (kbd->bi_memsize-LOGBUFF_LEN-LOGBUFF_OVERHEAD))
+ initrd_high = kbd->bi_memsize-LOGBUFF_LEN-LOGBUFF_OVERHEAD;
+ debug ("## Logbuffer at 0x%08lX ", kbd->bi_memsize-LOGBUFF_LEN);
+#else
+ debug ("## Logbuffer at 0x%08lX ", CONFIG_ALT_LB_ADDR);
+#endif
+#endif
if (!fit_image_check_target_arch (fit, os_noffset)) {
puts ("Unsupported Architecture\n");
show_boot_progress (-105);
diff --git a/common/cmd_cplbinfo.c b/common/cmd_cplbinfo.c
new file mode 100644
index 0000000..b2bbec1
--- /dev/null
+++ b/common/cmd_cplbinfo.c
@@ -0,0 +1,59 @@
+/*
+ * cmd_cplbinfo.c - dump the instruction/data cplb tables
+ *
+ * Copyright (c) 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/blackfin.h>
+#include <asm/cplb.h>
+#include <asm/mach-common/bits/mpu.h>
+
+/*
+ * Translate the PAGE_SIZE bits into a human string
+ */
+static const char *cplb_page_size(uint32_t data)
+{
+ static const char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" };
+ return page_size_string_table[(data & PAGE_SIZE_MASK) >> PAGE_SIZE_SHIFT];
+}
+
+/*
+ * show a hardware cplb table
+ */
+static void show_cplb_table(uint32_t *addr, uint32_t *data)
+{
+ size_t i;
+ printf(" Address Data Size Valid Locked\n");
+ for (i = 1; i <= 16; ++i) {
+ printf(" %2i 0x%p 0x%05X %s %c %c\n",
+ i, *addr, *data,
+ cplb_page_size(*data),
+ (*data & CPLB_VALID ? 'Y' : 'N'),
+ (*data & CPLB_LOCK ? 'Y' : 'N'));
+ ++addr;
+ ++data;
+ }
+}
+
+/*
+ * display current instruction and data cplb tables
+ */
+int do_cplbinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ printf("%s CPLB table [%08x]:\n", "Instruction", *(uint32_t *)DMEM_CONTROL);
+ show_cplb_table((uint32_t *)ICPLB_ADDR0, (uint32_t *)ICPLB_DATA0);
+
+ printf("%s CPLB table [%08x]:\n", "Data", *(uint32_t *)IMEM_CONTROL);
+ show_cplb_table((uint32_t *)DCPLB_ADDR0, (uint32_t *)DCPLB_DATA0);
+
+ return 0;
+}
+
+U_BOOT_CMD(cplbinfo, 1, 0, do_cplbinfo,
+ "cplbinfo- display current CPLB tables\n",
+ "\n"
+ " - display current CPLB tables\n");
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index 9cd22ee..a52284e 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -260,7 +260,7 @@
/********************************************************************
* Remove a property/node
********************************************************************/
- } else if (argv[1][0] == 'r') {
+ } else if ((argv[1][0] == 'r') && (argv[1][1] == 'm')) {
int nodeoffset; /* node offset from libfdt */
int err;
@@ -296,6 +296,111 @@
return err;
}
}
+
+ /********************************************************************
+ * Display header info
+ ********************************************************************/
+ } else if (argv[1][0] == 'h') {
+ u32 version = fdt_version(fdt);
+ printf("magic:\t\t\t0x%x\n", fdt_magic(fdt));
+ printf("totalsize:\t\t0x%x (%d)\n", fdt_totalsize(fdt), fdt_totalsize(fdt));
+ printf("off_dt_struct:\t\t0x%x\n", fdt_off_dt_struct(fdt));
+ printf("off_dt_strings:\t\t0x%x\n", fdt_off_dt_strings(fdt));
+ printf("off_mem_rsvmap:\t\t0x%x\n", fdt_off_mem_rsvmap(fdt));
+ printf("version:\t\t%d\n", version);
+ printf("last_comp_version:\t%d\n", fdt_last_comp_version(fdt));
+ if (version >= 2)
+ printf("boot_cpuid_phys:\t0x%x\n",
+ fdt_boot_cpuid_phys(fdt));
+ if (version >= 3)
+ printf("size_dt_strings:\t0x%x\n",
+ fdt_size_dt_strings(fdt));
+ if (version >= 17)
+ printf("size_dt_struct:\t\t0x%x\n",
+ fdt_size_dt_struct(fdt));
+ printf("number mem_rsv:\t\t0x%x\n", fdt_num_mem_rsv(fdt));
+ printf("\n");
+
+ /********************************************************************
+ * Set boot cpu id
+ ********************************************************************/
+ } else if ((argv[1][0] == 'b') && (argv[1][1] == 'o') &&
+ (argv[1][2] == 'o')) {
+ unsigned long tmp = simple_strtoul(argv[2], NULL, 16);
+ fdt_set_boot_cpuid_phys(fdt, tmp);
+
+ /********************************************************************
+ * memory command
+ ********************************************************************/
+ } else if ((argv[1][0] == 'm') && (argv[1][1] == 'e')) {
+ uint64_t addr, size;
+ int err;
+#ifdef CFG_64BIT_STRTOUL
+ addr = simple_strtoull(argv[2], NULL, 16);
+ size = simple_strtoull(argv[3], NULL, 16);
+#else
+ addr = simple_strtoul(argv[2], NULL, 16);
+ size = simple_strtoul(argv[3], NULL, 16);
+#endif
+ err = fdt_fixup_memory(fdt, addr, size);
+ if (err < 0)
+ return err;
+
+ /********************************************************************
+ * mem reserve commands
+ ********************************************************************/
+ } else if ((argv[1][0] == 'r') && (argv[1][1] == 's')) {
+ if (argv[2][0] == 'p') {
+ uint64_t addr, size;
+ int total = fdt_num_mem_rsv(fdt);
+ int j, err;
+ printf("index\t\t start\t\t size\n");
+ printf("-------------------------------"
+ "-----------------\n");
+ for (j = 0; j < total; j++) {
+ err = fdt_get_mem_rsv(fdt, j, &addr, &size);
+ if (err < 0) {
+ printf("libfdt fdt_get_mem_rsv(): %s\n",
+ fdt_strerror(err));
+ return err;
+ }
+ printf(" %x\t%08x%08x\t%08x%08x\n", j,
+ (u32)(addr >> 32),
+ (u32)(addr & 0xffffffff),
+ (u32)(size >> 32),
+ (u32)(size & 0xffffffff));
+ }
+ } else if (argv[2][0] == 'a') {
+ uint64_t addr, size;
+ int err;
+#ifdef CFG_64BIT_STRTOUL
+ addr = simple_strtoull(argv[3], NULL, 16);
+ size = simple_strtoull(argv[4], NULL, 16);
+#else
+ addr = simple_strtoul(argv[3], NULL, 16);
+ size = simple_strtoul(argv[4], NULL, 16);
+#endif
+ err = fdt_add_mem_rsv(fdt, addr, size);
+
+ if (err < 0) {
+ printf("libfdt fdt_add_mem_rsv(): %s\n",
+ fdt_strerror(err));
+ return err;
+ }
+ } else if (argv[2][0] == 'd') {
+ unsigned long idx = simple_strtoul(argv[3], NULL, 16);
+ int err = fdt_del_mem_rsv(fdt, idx);
+
+ if (err < 0) {
+ printf("libfdt fdt_del_mem_rsv(): %s\n",
+ fdt_strerror(err));
+ return err;
+ }
+ } else {
+ /* Unrecognized command */
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
}
#ifdef CONFIG_OF_BOARD_SETUP
/* Call the board-specific fixup routine */
@@ -305,17 +410,6 @@
/* Create a chosen node */
else if (argv[1][0] == 'c')
fdt_chosen(fdt, 0, 0, 1);
-
-#ifdef CONFIG_OF_HAS_UBOOT_ENV
- /* Create a u-boot-env node */
- else if (argv[1][0] == 'e')
- fdt_env(fdt);
-#endif
-#ifdef CONFIG_OF_HAS_BD_T
- /* Create a bd_t node */
- else if (argv[1][0] == 'b')
- fdt_bd_t(fdt);
-#endif
else {
/* Unrecognized command */
printf ("Usage:\n%s\n", cmdtp->usage);
@@ -689,13 +783,13 @@
"fdt set <path> <prop> [<val>] - Set <property> [to <val>]\n"
"fdt mknode <path> <node> - Create a new node after <path>\n"
"fdt rm <path> [<prop>] - Delete the node or <property>\n"
+ "fdt header - Display header info\n"
+ "fdt bootcpu <id> - Set boot cpuid\n"
+ "fdt memory <addr> <size> - Add/Update memory node\n"
+ "fdt rsvmem print - Show current mem reserves\n"
+ "fdt rsvmem add <addr> <size> - Add a mem reserve\n"
+ "fdt rsvmem delete <index> - Delete a mem reserves\n"
"fdt chosen - Add/update the /chosen branch in the tree\n"
-#ifdef CONFIG_OF_HAS_UBOOT_ENV
- "fdt env - Add/replace the /u-boot-env branch in the tree\n"
-#endif
-#ifdef CONFIG_OF_HAS_BD_T
- "fdt bd_t - Add/replace the /bd_t branch in the tree\n"
-#endif
"NOTE: If the path or property you are setting/printing has a '#' character\n"
" or spaces, you MUST escape it with a \\ character or quote it with \".\n"
);
diff --git a/common/cmd_log.c b/common/cmd_log.c
index e593dbe..34b36ff 100644
--- a/common/cmd_log.c
+++ b/common/cmd_log.c
@@ -59,14 +59,25 @@
static unsigned console_loglevel = 3;
static unsigned default_message_loglevel = 4;
static unsigned log_version = 1;
+#ifdef CONFIG_ALT_LB_ADDR
+static volatile logbuff_t *log;
+#else
static logbuff_t *log;
+#endif
+static char *lbuf;
void logbuff_init_ptrs (void)
{
unsigned long tag, post_word;
char *s;
+#ifdef CONFIG_ALT_LB_ADDR
+ log = (logbuff_t *)CONFIG_ALT_LH_ADDR;
+ lbuf = (char *)CONFIG_ALT_LB_ADDR;
+#else
log = (logbuff_t *)(gd->bd->bi_memsize-LOGBUFF_LEN) - 1;
+ lbuf = log->buf;
+#endif
/* Set up log version */
if ((s = getenv ("logversion")) != NULL)
@@ -101,11 +112,26 @@
void logbuff_reset (void)
{
+#ifndef CONFIG_ALT_LB_ADDR
memset (log, 0, sizeof (logbuff_t));
- if (log_version == 2)
+#endif
+ if (log_version == 2) {
log->v2.tag = LOGBUFF_MAGIC;
- else
+#ifdef CONFIG_ALT_LB_ADDR
+ log->v2.start = 0;
+ log->v2.con = 0;
+ log->v2.end = 0;
+ log->v2.chars = 0;
+#endif
+ } else {
log->v1.tag = LOGBUFF_MAGIC;
+#ifdef CONFIG_ALT_LB_ADDR
+ log->v1.dummy = 0;
+ log->v1.start = 0;
+ log->v1.size = 0;
+ log->v1.chars = 0;
+#endif
+ }
}
int drv_logbuff_init (void)
@@ -188,7 +214,7 @@
size = log->v1.size;
}
for (i=0; i < (size&LOGBUFF_MASK); i++) {
- s = (char *)log->buf+((start+i)&LOGBUFF_MASK);
+ s = lbuf+((start+i)&LOGBUFF_MASK);
putc (*s);
}
return 0;
@@ -196,7 +222,7 @@
logbuff_reset ();
return 0;
} else if (strcmp(argv[1],"info") == 0) {
- printf ("Logbuffer at %08lx\n", (unsigned long)log->buf);
+ printf ("Logbuffer at %08lx\n", (unsigned long)lbuf);
if (log_version == 2) {
printf ("log_start = %08lx\n", log->v2.start);
printf ("log_end = %08lx\n", log->v2.end);
@@ -257,14 +283,14 @@
line_feed = 0;
for (; p < buf_end; p++) {
if (log_version == 2) {
- log->buf[log->v2.end & LOGBUFF_MASK] = *p;
+ lbuf[log->v2.end & LOGBUFF_MASK] = *p;
log->v2.end++;
if (log->v2.end - log->v2.start > LOGBUFF_LEN)
log->v2.start++;
log->v2.chars++;
}
else {
- log->buf[(log->v1.start + log->v1.size) &
+ lbuf[(log->v1.start + log->v1.size) &
LOGBUFF_MASK] = *p;
if (log->v1.size < LOGBUFF_LEN)
log->v1.size++;
diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c
new file mode 100644
index 0000000..2e49b6d
--- /dev/null
+++ b/common/cmd_setexpr.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file provides a shell like 'expr' function to return.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+
+int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ ulong a, b;
+ char buf[16];
+
+ /* Validate arguments */
+ if ((argc != 5) || (strlen(argv[3]) != 1)) {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ a = simple_strtoul(argv[2], NULL, 16);
+ b = simple_strtoul(argv[4], NULL, 16);
+
+ switch (argv[3][0]) {
+ case '|': sprintf(buf, "%lx", (a | b)); break;
+ case '&': sprintf(buf, "%lx", (a & b)); break;
+ case '+': sprintf(buf, "%lx", (a + b)); break;
+ case '^': sprintf(buf, "%lx", (a ^ b)); break;
+ case '-': sprintf(buf, "%lx", (a - b)); break;
+ case '*': sprintf(buf, "%lx", (a * b)); break;
+ case '/': sprintf(buf, "%lx", (a / b)); break;
+ case '%': sprintf(buf, "%lx", (a % b)); break;
+ default:
+ printf("invalid op\n");
+ return 1;
+ }
+
+ setenv(argv[1], buf);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ setexpr, 5, 0, do_setexpr,
+ "setexpr - set environment variable as the result of eval expression\n",
+ "name value1 <op> value2\n"
+ " - set environment variable 'name' to the result of the evaluated\n"
+ " express specified by <op>. <op> can be &, |, ^, +, -, *, /, %\n"
+);
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 69eb667..7507744 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -40,7 +40,6 @@
*/
struct fdt_header *fdt;
-/********************************************************************/
/**
* fdt_find_and_setprop: Find a node and set it's property
@@ -218,198 +217,6 @@
return err;
}
-/********************************************************************/
-
-#ifdef CONFIG_OF_HAS_UBOOT_ENV
-
-/* Function that returns a character from the environment */
-extern uchar(*env_get_char) (int);
-
-
-int fdt_env(void *fdt)
-{
- int nodeoffset;
- int err;
- int k, nxt;
- int i;
- static char tmpenv[256];
-
- err = fdt_check_header(fdt);
- if (err < 0) {
- printf("fdt_env: %s\n", fdt_strerror(err));
- return err;
- }
-
- /*
- * See if we already have a "u-boot-env" node, delete it if so.
- * Then create a new empty node.
- */
- nodeoffset = fdt_path_offset (fdt, "/u-boot-env");
- if (nodeoffset >= 0) {
- err = fdt_del_node(fdt, nodeoffset);
- if (err < 0) {
- printf("fdt_env: %s\n", fdt_strerror(err));
- return err;
- }
- }
- /*
- * Create a new node "/u-boot-env" (offset 0 is root level)
- */
- nodeoffset = fdt_add_subnode(fdt, 0, "u-boot-env");
- if (nodeoffset < 0) {
- printf("WARNING: could not create /u-boot-env %s.\n",
- fdt_strerror(nodeoffset));
- return nodeoffset;
- }
-
- for (i = 0; env_get_char(i) != '\0'; i = nxt + 1) {
- char *s, *lval, *rval;
-
- /*
- * Find the end of the name=definition
- */
- for (nxt = i; env_get_char(nxt) != '\0'; ++nxt)
- ;
- s = tmpenv;
- for (k = i; k < nxt && s < &tmpenv[sizeof(tmpenv) - 1]; ++k)
- *s++ = env_get_char(k);
- *s++ = '\0';
- lval = tmpenv;
- /*
- * Find the first '=': it separates the name from the value
- */
- s = strchr(tmpenv, '=');
- if (s != NULL) {
- *s++ = '\0';
- rval = s;
- } else
- continue;
- err = fdt_setprop(fdt, nodeoffset, lval, rval, strlen(rval)+1);
- if (err < 0) {
- printf("WARNING: could not set %s %s.\n",
- lval, fdt_strerror(err));
- return err;
- }
- }
- return 0;
-}
-#endif /* ifdef CONFIG_OF_HAS_UBOOT_ENV */
-
-/********************************************************************/
-
-#ifdef CONFIG_OF_HAS_BD_T
-
-#define BDM(x) { .name = #x, .offset = offsetof(bd_t, bi_ ##x ) }
-
-static const struct {
- const char *name;
- int offset;
-} bd_map[] = {
- BDM(memstart),
- BDM(memsize),
- BDM(flashstart),
- BDM(flashsize),
- BDM(flashoffset),
- BDM(sramstart),
- BDM(sramsize),
-#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \
- || defined(CONFIG_E500)
- BDM(immr_base),
-#endif
-#if defined(CONFIG_MPC5xxx)
- BDM(mbar_base),
-#endif
-#if defined(CONFIG_MPC83XX)
- BDM(immrbar),
-#endif
-#if defined(CONFIG_MPC8220)
- BDM(mbar_base),
- BDM(inpfreq),
- BDM(pcifreq),
- BDM(pevfreq),
- BDM(flbfreq),
- BDM(vcofreq),
-#endif
- BDM(bootflags),
- BDM(ip_addr),
- BDM(intfreq),
- BDM(busfreq),
-#ifdef CONFIG_CPM2
- BDM(cpmfreq),
- BDM(brgfreq),
- BDM(sccfreq),
- BDM(vco),
-#endif
-#if defined(CONFIG_MPC5xxx)
- BDM(ipbfreq),
- BDM(pcifreq),
-#endif
- BDM(baudrate),
-};
-
-
-int fdt_bd_t(void *fdt)
-{
- bd_t *bd = gd->bd;
- int nodeoffset;
- int err;
- u32 tmp; /* used to set 32 bit integer properties */
- int i;
-
- err = fdt_check_header(fdt);
- if (err < 0) {
- printf("fdt_bd_t: %s\n", fdt_strerror(err));
- return err;
- }
-
- /*
- * See if we already have a "bd_t" node, delete it if so.
- * Then create a new empty node.
- */
- nodeoffset = fdt_path_offset (fdt, "/bd_t");
- if (nodeoffset >= 0) {
- err = fdt_del_node(fdt, nodeoffset);
- if (err < 0) {
- printf("fdt_bd_t: %s\n", fdt_strerror(err));
- return err;
- }
- }
- /*
- * Create a new node "/bd_t" (offset 0 is root level)
- */
- nodeoffset = fdt_add_subnode(fdt, 0, "bd_t");
- if (nodeoffset < 0) {
- printf("WARNING: could not create /bd_t %s.\n",
- fdt_strerror(nodeoffset));
- printf("fdt_bd_t: %s\n", fdt_strerror(nodeoffset));
- return nodeoffset;
- }
- /*
- * Use the string/pointer structure to create the entries...
- */
- for (i = 0; i < sizeof(bd_map)/sizeof(bd_map[0]); i++) {
- tmp = cpu_to_be32(getenv("bootargs"));
- err = fdt_setprop(fdt, nodeoffset,
- bd_map[i].name, &tmp, sizeof(tmp));
- if (err < 0)
- printf("WARNING: could not set %s %s.\n",
- bd_map[i].name, fdt_strerror(err));
- }
- /*
- * Add a couple of oddball entries...
- */
- err = fdt_setprop(fdt, nodeoffset, "enetaddr", &bd->bi_enetaddr, 6);
- if (err < 0)
- printf("WARNING: could not set enetaddr %s.\n",
- fdt_strerror(err));
- err = fdt_setprop(fdt, nodeoffset, "ethspeed", &bd->bi_ethspeed, 4);
- if (err < 0)
- printf("WARNING: could not set ethspeed %s.\n",
- fdt_strerror(err));
- return 0;
-}
-#endif /* ifdef CONFIG_OF_HAS_BD_T */
-
void do_fixup_by_path(void *fdt, const char *path, const char *prop,
const void *val, int len, int create)
{
@@ -615,3 +422,28 @@
}
}
#endif
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+void fdt_fixup_dr_usb(void *blob, bd_t *bd)
+{
+ char *mode;
+ const char *compat = "fsl-usb2-dr";
+ const char *prop = "dr_mode";
+ int node_offset;
+ int err;
+
+ mode = getenv("usb_dr_mode");
+ if (!mode)
+ return;
+
+ node_offset = fdt_node_offset_by_compatible(blob, 0, compat);
+ if (node_offset < 0)
+ printf("WARNING: could not find compatible node %s: %s.\n",
+ compat, fdt_strerror(node_offset));
+
+ err = fdt_setprop(blob, node_offset, prop, mode, strlen(mode) + 1);
+ if (err < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop, compat, fdt_strerror(err));
+}
+#endif /* CONFIG_HAS_FSL_DR_USB */
diff --git a/common/main.c b/common/main.c
index 163ba02..21e7afa 100644
--- a/common/main.c
+++ b/common/main.c
@@ -40,7 +40,7 @@
#include <post.h>
-#ifdef CONFIG_SILENT_CONSOLE
+#if defined(CONFIG_SILENT_CONSOLE) || defined(CONFIG_POST)
DECLARE_GLOBAL_DATA_PTR;
#endif
@@ -369,6 +369,12 @@
init_cmd_timeout ();
# endif /* CONFIG_BOOT_RETRY_TIME */
+#ifdef CONFIG_POST
+ if (gd->flags & GD_FLG_POSTFAIL) {
+ s = getenv("failbootcmd");
+ }
+ else
+#endif /* CONFIG_POST */
#ifdef CONFIG_BOOTCOUNT_LIMIT
if (bootlimit && (bootcount > bootlimit)) {
printf ("Warning: Bootlimit (%u) exceeded. Using altbootcmd.\n",
diff --git a/cpu/mips/cache.S b/cpu/mips/cache.S
index 443240e..89ada71 100644
--- a/cpu/mips/cache.S
+++ b/cpu/mips/cache.S
@@ -1,5 +1,5 @@
/*
- * Cache-handling routined for MIPS 4K CPUs
+ * Cache-handling routined for MIPS CPUs
*
* Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
*
@@ -24,15 +24,32 @@
#include <config.h>
#include <version.h>
+#include <asm/asm.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/cacheops.h>
- /* 16KB is the maximum size of instruction and data caches on
- * MIPS 4K.
- */
-#define MIPS_MAX_CACHE_SIZE 0x4000
+#define RA t8
+
+/*
+ * 16kB is the maximum size of instruction and data caches on MIPS 4K,
+ * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience.
+ *
+ * Note that the above size is the maximum size of primary cache. U-Boot
+ * doesn't have L2 cache support for now.
+ */
+#define MIPS_MAX_CACHE_SIZE 0x10000
+
+#define INDEX_BASE KSEG0
+
+ .macro cache_op op addr
+ .set push
+ .set noreorder
+ .set mips3
+ cache \op, 0(\addr)
+ .set pop
+ .endm
/*
* cacheop macro to automate cache operations
@@ -103,6 +120,77 @@
#define icacheop(kva, n, cacheSize, cacheLineSize, op) \
icacheopn(kva, n, cacheSize, cacheLineSize, 1, (op))
+ .macro f_fill64 dst, offset, val
+ LONG_S \val, (\offset + 0 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 1 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 2 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 3 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 4 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 5 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 6 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 7 * LONGSIZE)(\dst)
+#if LONGSIZE == 4
+ LONG_S \val, (\offset + 8 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 9 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 10 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 11 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 12 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 13 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 14 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 15 * LONGSIZE)(\dst)
+#endif
+ .endm
+
+/*
+ * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz)
+ */
+LEAF(mips_init_icache)
+ blez a1, 9f
+ mtc0 zero, CP0_TAGLO
+ /* clear tag to invalidate */
+ PTR_LI t0, INDEX_BASE
+ PTR_ADDU t1, t0, a1
+1: cache_op Index_Store_Tag_I t0
+ PTR_ADDU t0, a2
+ bne t0, t1, 1b
+ /* fill once, so data field parity is correct */
+ PTR_LI t0, INDEX_BASE
+2: cache_op Fill t0
+ PTR_ADDU t0, a2
+ bne t0, t1, 2b
+ /* invalidate again - prudent but not strictly neccessary */
+ PTR_LI t0, INDEX_BASE
+1: cache_op Index_Store_Tag_I t0
+ PTR_ADDU t0, a2
+ bne t0, t1, 1b
+9: jr ra
+ END(mips_init_icache)
+
+/*
+ * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz)
+ */
+LEAF(mips_init_dcache)
+ blez a1, 9f
+ mtc0 zero, CP0_TAGLO
+ /* clear all tags */
+ PTR_LI t0, INDEX_BASE
+ PTR_ADDU t1, t0, a1
+1: cache_op Index_Store_Tag_D t0
+ PTR_ADDU t0, a2
+ bne t0, t1, 1b
+ /* load from each line (in cached space) */
+ PTR_LI t0, INDEX_BASE
+2: LONG_L zero, 0(t0)
+ PTR_ADDU t0, a2
+ bne t0, t1, 2b
+ /* clear all tags */
+ PTR_LI t0, INDEX_BASE
+1: cache_op Index_Store_Tag_D t0
+ PTR_ADDU t0, a2
+ bne t0, t1, 1b
+9: jr ra
+ END(mips_init_dcache)
+
/*******************************************************************************
*
* mips_cache_reset - low level initialisation of the primary caches
@@ -119,10 +207,8 @@
* RETURNS: N/A
*
*/
- .globl mips_cache_reset
- .ent mips_cache_reset
-mips_cache_reset:
-
+NESTED(mips_cache_reset, 0, ra)
+ move RA, ra
li t2, CFG_ICACHE_SIZE
li t3, CFG_DCACHE_SIZE
li t4, CFG_CACHELINE_SIZE
@@ -130,27 +216,14 @@
li v0, MIPS_MAX_CACHE_SIZE
- /* Now clear that much memory starting from zero.
+ /*
+ * Now clear that much memory starting from zero.
*/
-
- li a0, KSEG1
- addu a1, a0, v0
-2:
- sw zero, 0(a0)
- sw zero, 4(a0)
- sw zero, 8(a0)
- sw zero, 12(a0)
- sw zero, 16(a0)
- sw zero, 20(a0)
- sw zero, 24(a0)
- sw zero, 28(a0)
- addu a0, 32
- bltu a0, a1, 2b
-
- /* Set invalid tag.
- */
-
- mtc0 zero, CP0_TAGLO
+ PTR_LI a0, KSEG1
+ PTR_ADDU a1, a0, v0
+2: PTR_ADDIU a0, 64
+ f_fill64 a0, -64, zero
+ bne a0, a1, 2b
/*
* The caches are probably in an indeterminate state,
@@ -158,48 +231,26 @@
* invalidate, load/fill, invalidate for each line.
*/
- /* Assume bottom of RAM will generate good parity for the cache.
+ /*
+ * Assume bottom of RAM will generate good parity for the cache.
*/
- li a0, K0BASE
- move a2, t2 # icacheSize
- move a3, t4 # icacheLineSize
- move a1, a2
- icacheopn(a0,a1,a2,a3,121,(Index_Store_Tag_I,Fill))
-
- /* To support Orion/R4600, we initialise the data cache in 3 passes.
+ /*
+ * Initialize the I-cache first,
*/
+ move a1, t2
+ move a2, t4
+ bal mips_init_icache
- /* 1: initialise dcache tags.
+ /*
+ * then initialize D-cache.
*/
+ move a1, t3
+ move a2, t5
+ bal mips_init_dcache
- li a0, K0BASE
- move a2, t3 # dcacheSize
- move a3, t5 # dcacheLineSize
- move a1, a2
- icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
-
- /* 2: fill dcache.
- */
-
- li a0, K0BASE
- move a2, t3 # dcacheSize
- move a3, t5 # dcacheLineSize
- move a1, a2
- icacheopn(a0,a1,a2,a3,1lw,(dummy))
-
- /* 3: clear dcache tags.
- */
-
- li a0, K0BASE
- move a2, t3 # dcacheSize
- move a3, t5 # dcacheLineSize
- move a1, a2
- icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
-
- j ra
-
- .end mips_cache_reset
+ jr RA
+ END(mips_cache_reset)
/*******************************************************************************
*
@@ -208,15 +259,15 @@
* RETURNS: 0 - cache disabled; 1 - cache enabled
*
*/
- .globl dcache_status
- .ent dcache_status
-dcache_status:
-
- mfc0 v0, CP0_CONFIG
- andi v0, v0, 1
- j ra
-
- .end dcache_status
+LEAF(dcache_status)
+ mfc0 t0, CP0_CONFIG
+ li t1, CONF_CM_UNCACHED
+ andi t0, t0, CONF_CM_CMASK
+ move v0, zero
+ beq t0, t1, 2f
+ li v0, 1
+2: jr ra
+ END(dcache_status)
/*******************************************************************************
*
@@ -225,19 +276,16 @@
* RETURNS: N/A
*
*/
- .globl dcache_disable
- .ent dcache_disable
-dcache_disable:
-
+LEAF(dcache_disable)
mfc0 t0, CP0_CONFIG
li t1, -8
and t0, t0, t1
ori t0, t0, CONF_CM_UNCACHED
mtc0 t0, CP0_CONFIG
j ra
+ END(dcache_disable)
- .end dcache_disable
-
+#ifdef CFG_INIT_RAM_LOCK_MIPS
/*******************************************************************************
*
* mips_cache_lock - lock RAM area pointed to by a0 in cache.
@@ -263,3 +311,4 @@
j ra
.end mips_cache_lock
+#endif /* CFG_INIT_RAM_LOCK_MIPS */
diff --git a/cpu/mips/cpu.c b/cpu/mips/cpu.c
index 7559ac6..8b43d8e 100644
--- a/cpu/mips/cpu.c
+++ b/cpu/mips/cpu.c
@@ -23,24 +23,45 @@
#include <common.h>
#include <command.h>
-#include <asm/inca-ip.h>
#include <asm/mipsregs.h>
+#include <asm/cacheops.h>
+#include <asm/reboot.h>
+
+#define cache_op(op,addr) \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noreorder \n" \
+ " .set mips3\n\t \n" \
+ " cache %0, %1 \n" \
+ " .set pop \n" \
+ : \
+ : "i" (op), "R" (*(unsigned char *)(addr)))
+
+void __attribute__((weak)) _machine_restart(void)
+{
+}
int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
-#if defined(CONFIG_INCA_IP)
- *INCA_IP_WDT_RST_REQ = 0x3f;
-#elif defined(CONFIG_PURPLE) || defined(CONFIG_TB0229)
- void (*f)(void) = (void *) 0xbfc00000;
+ _machine_restart();
- f();
-#endif
fprintf(stderr, "*** reset failed ***\n");
return 0;
}
void flush_cache(ulong start_addr, ulong size)
{
+ unsigned long lsize = CFG_CACHELINE_SIZE;
+ unsigned long addr = start_addr & ~(lsize - 1);
+ unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
+
+ while (1) {
+ cache_op(Hit_Writeback_Inv_D, start_addr);
+ cache_op(Hit_Invalidate_I, start_addr);
+ if (addr == aend)
+ break;
+ addr += lsize;
+ }
}
void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
diff --git a/cpu/mips/start.S b/cpu/mips/start.S
index c92b162..baac2ce 100644
--- a/cpu/mips/start.S
+++ b/cpu/mips/start.S
@@ -27,6 +27,30 @@
#include <asm/regdef.h>
#include <asm/mipsregs.h>
+ /*
+ * For the moment disable interrupts, mark the kernel mode and
+ * set ST0_KX so that the CPU does not spit fire when using
+ * 64-bit addresses.
+ */
+ .macro setup_c0_status set clr
+ .set push
+ mfc0 t0, CP0_STATUS
+ or t0, ST0_CU0 | \set | 0x1f | \clr
+ xor t0, 0x1f | \clr
+ mtc0 t0, CP0_STATUS
+ .set noreorder
+ sll zero, 3 # ehb
+ .set pop
+ .endm
+
+ .macro setup_c0_status_reset
+#ifdef CONFIG_64BIT
+ setup_c0_status ST0_KX 0
+#else
+ setup_c0_status 0 0
+#endif
+ .endm
+
#define RVECENT(f,n) \
b f; nop
#define XVECENT(f,bev) \
@@ -211,19 +235,11 @@
mtc0 zero, CP0_WATCHLO
mtc0 zero, CP0_WATCHHI
- /* STATUS register */
-#ifdef CONFIG_TB0229
- li k0, ST0_CU0
-#else
- mfc0 k0, CP0_STATUS
-#endif
- li k1, ~ST0_IE
- and k0, k1
- mtc0 k0, CP0_STATUS
-
- /* CAUSE register */
+ /* WP(Watch Pending), SW0/1 should be cleared. */
mtc0 zero, CP0_CAUSE
+ setup_c0_status_reset
+
/* Init Timer */
mtc0 zero, CP0_COUNT
mtc0 zero, CP0_COMPARE
@@ -240,14 +256,6 @@
1:
lw gp, 0(ra)
-#ifdef CONFIG_INCA_IP
- /* Disable INCA-IP Watchdog.
- */
- la t9, disable_incaip_wdt
- jalr t9
- nop
-#endif
-
/* Initialize any external memory.
*/
la t9, lowlevel_init
@@ -267,10 +275,12 @@
/* Set up temporary stack.
*/
+#ifdef CFG_INIT_RAM_LOCK_MIPS
li a0, CFG_INIT_SP_OFFSET
la t9, mips_cache_lock
jalr t9
nop
+#endif
li t0, CFG_SDRAM_BASE + CFG_INIT_SP_OFFSET
la sp, 0(t0)
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index 7522afe..ace1653 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -119,7 +119,9 @@
{
int div = in_8((void*)CFG_MBAR + 0x204) & 0x0020 ? 8 : 4;
char * cpu_path = "/cpus/" OF_CPU;
+#ifdef CONFIG_MPC5xxx_FEC
char * eth_path = "/" OF_SOC "/ethernet@3000";
+#endif
do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
@@ -127,7 +129,9 @@
do_fixup_by_path_u32(blob, "/" OF_SOC, "bus-frequency", bd->bi_ipbfreq, 1);
do_fixup_by_path_u32(blob, "/" OF_SOC, "system-frequency",
bd->bi_busfreq*div, 1);
+#ifdef CONFIG_MPC5xxx_FEC
do_fixup_by_path(blob, eth_path, "mac-address", bd->bi_enetaddr, 6, 0);
do_fixup_by_path(blob, eth_path, "local-mac-address", bd->bi_enetaddr, 6, 0);
+#endif
}
#endif
diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
index 94a3cb8..fcb6a52 100644
--- a/cpu/mpc83xx/Makefile
+++ b/cpu/mpc83xx/Makefile
@@ -28,9 +28,20 @@
LIB = $(obj)lib$(CPU).a
START = start.o
-COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
- spd_sdram.o ecc.o qe_io.o pci.o fdt.o
+COBJS-y += traps.o
+COBJS-y += cpu.o
+COBJS-y += cpu_init.o
+COBJS-y += speed.o
+COBJS-y += interrupts.o
+COBJS-y += spd_sdram.o
+COBJS-y += ecc.o
+COBJS-$(CONFIG_QE) += qe_io.o
+COBJS-$(CONFIG_FSL_SERDES) += serdes.o
+COBJS-$(CONFIG_83XX_GENERIC_PCI) += pci.o
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+
+COBJS := $(COBJS-y)
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
START := $(addprefix $(obj),$(START))
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index e643037..fba5b02 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -79,6 +79,12 @@
(CFG_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
#endif
+#ifdef CFG_SPCR_OPT
+ /* Optimize transactions between CSB and other devices */
+ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
+ (CFG_SPCR_OPT << SPCR_OPT_SHIFT);
+#endif
+
#ifdef CFG_SPCR_TSECEP
/* all eTSEC's Emergency priority */
im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSECEP) |
diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c
index 6f55932..b39f678 100644
--- a/cpu/mpc83xx/fdt.c
+++ b/cpu/mpc83xx/fdt.c
@@ -24,9 +24,6 @@
*/
#include <common.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-
#include <libfdt.h>
#include <fdt_support.h>
@@ -49,6 +46,14 @@
"clock-frequency", gd->core_clk, 1);
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
"bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_compat_u32(blob, "fsl,soc",
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_compat_u32(blob, "fsl,soc",
+ "clock-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_compat_u32(blob, "fsl,immr",
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_compat_u32(blob, "fsl,immr",
+ "clock-frequency", bd->bi_busfreq, 1);
#ifdef CONFIG_QE
ft_qe_setup(blob);
#endif
@@ -68,4 +73,3 @@
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}
-#endif /* CONFIG_OF_LIBFDT */
diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
index 18558db..adabf7a 100644
--- a/cpu/mpc83xx/pci.c
+++ b/cpu/mpc83xx/pci.c
@@ -33,7 +33,6 @@
#include <asm/mpc8349_pci.h>
-#ifdef CONFIG_83XX_GENERIC_PCI
#define MAX_BUSES 2
DECLARE_GLOBAL_DATA_PTR;
@@ -209,4 +208,3 @@
}
}
#endif /* CONFIG_OF_LIBFDT */
-#endif /* CONFIG_83XX_GENERIC_PCI */
diff --git a/cpu/mpc83xx/qe_io.c b/cpu/mpc83xx/qe_io.c
index 8b3937a..ce91a07 100644
--- a/cpu/mpc83xx/qe_io.c
+++ b/cpu/mpc83xx/qe_io.c
@@ -25,7 +25,6 @@
#include "asm/io.h"
#include "asm/immap_83xx.h"
-#if defined(CONFIG_QE)
#define NUM_OF_PINS 32
void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
{
@@ -81,5 +80,3 @@
out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val);
}
}
-
-#endif /* CONFIG_QE */
diff --git a/cpu/mpc83xx/serdes.c b/cpu/mpc83xx/serdes.c
new file mode 100644
index 0000000..020c4c8
--- /dev/null
+++ b/cpu/mpc83xx/serdes.c
@@ -0,0 +1,145 @@
+/*
+ * Freescale SerDes initialization routine
+ *
+ * Copyright (C) 2007 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2008 MontaVista Software, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/fsl_serdes.h>
+
+/* SerDes registers */
+#define FSL_SRDSCR0_OFFS 0x0
+#define FSL_SRDSCR0_DPP_1V2 0x00008800
+#define FSL_SRDSCR1_OFFS 0x4
+#define FSL_SRDSCR1_PLLBW 0x00000040
+#define FSL_SRDSCR2_OFFS 0x8
+#define FSL_SRDSCR2_VDD_1V2 0x00800000
+#define FSL_SRDSCR2_SEIC_MASK 0x00001c1c
+#define FSL_SRDSCR2_SEIC_SATA 0x00001414
+#define FSL_SRDSCR2_SEIC_PEX 0x00001010
+#define FSL_SRDSCR2_SEIC_SGMII 0x00000101
+#define FSL_SRDSCR3_OFFS 0xc
+#define FSL_SRDSCR3_KFR_SATA 0x10100000
+#define FSL_SRDSCR3_KPH_SATA 0x04040000
+#define FSL_SRDSCR3_SDFM_SATA_PEX 0x01010000
+#define FSL_SRDSCR3_SDTXL_SATA 0x00000505
+#define FSL_SRDSCR4_OFFS 0x10
+#define FSL_SRDSCR4_PROT_SATA 0x00000808
+#define FSL_SRDSCR4_PROT_PEX 0x00000101
+#define FSL_SRDSCR4_PROT_SGMII 0x00000505
+#define FSL_SRDSCR4_PLANE_X2 0x01000000
+#define FSL_SRDSRSTCTL_OFFS 0x20
+#define FSL_SRDSRSTCTL_RST 0x80000000
+#define FSL_SRDSRSTCTL_SATA_RESET 0xf
+
+void fsl_setup_serdes(u32 offset, char proto, char rfcks, char vdd)
+{
+ void *regs = (void *)CFG_IMMR + offset;
+ u32 tmp;
+
+ /* 1.0V corevdd */
+ if (vdd) {
+ /* DPPE/DPPA = 0 */
+ tmp = in_be32(regs + FSL_SRDSCR0_OFFS);
+ tmp &= ~FSL_SRDSCR0_DPP_1V2;
+ out_be32(regs + FSL_SRDSCR0_OFFS, tmp);
+
+ /* VDD = 0 */
+ tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_VDD_1V2;
+ out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
+ }
+
+ /* protocol specific configuration */
+ switch (proto) {
+ case FSL_SERDES_PROTO_SATA:
+ /* Set and clear reset bits */
+ tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
+ tmp |= FSL_SRDSRSTCTL_SATA_RESET;
+ out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
+ udelay(1000);
+ tmp &= ~FSL_SRDSRSTCTL_SATA_RESET;
+ out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
+
+ /* Configure SRDSCR1 */
+ tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_PLLBW;
+ out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
+
+ /* Configure SRDSCR2 */
+ tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_SEIC_MASK;
+ tmp |= FSL_SRDSCR2_SEIC_SATA;
+ out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
+
+ /* Configure SRDSCR3 */
+ tmp = FSL_SRDSCR3_KFR_SATA | FSL_SRDSCR3_KPH_SATA |
+ FSL_SRDSCR3_SDFM_SATA_PEX |
+ FSL_SRDSCR3_SDTXL_SATA;
+ out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
+
+ /* Configure SRDSCR4 */
+ tmp = rfcks | FSL_SRDSCR4_PROT_SATA;
+ out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
+ break;
+ case FSL_SERDES_PROTO_PEX:
+ case FSL_SERDES_PROTO_PEX_X2:
+ /* Configure SRDSCR1 */
+ tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
+ tmp |= FSL_SRDSCR1_PLLBW;
+ out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
+
+ /* Configure SRDSCR2 */
+ tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_SEIC_MASK;
+ tmp |= FSL_SRDSCR2_SEIC_PEX;
+ out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
+
+ /* Configure SRDSCR3 */
+ tmp = FSL_SRDSCR3_SDFM_SATA_PEX;
+ out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
+
+ /* Configure SRDSCR4 */
+ tmp = rfcks | FSL_SRDSCR4_PROT_PEX;
+ if (proto == FSL_SERDES_PROTO_PEX_X2)
+ tmp |= FSL_SRDSCR4_PLANE_X2;
+ out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
+ break;
+ case FSL_SERDES_PROTO_SGMII:
+ /* Configure SRDSCR1 */
+ tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_PLLBW;
+ out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
+
+ /* Configure SRDSCR2 */
+ tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_SEIC_MASK;
+ tmp |= FSL_SRDSCR2_SEIC_SGMII;
+ out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
+
+ /* Configure SRDSCR3 */
+ out_be32(regs + FSL_SRDSCR3_OFFS, 0);
+
+ /* Configure SRDSCR4 */
+ tmp = rfcks | FSL_SRDSCR4_PROT_SGMII;
+ out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
+ break;
+ default:
+ return;
+ }
+
+ /* Do a software reset */
+ tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
+ tmp |= FSL_SRDSRSTCTL_RST;
+ out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
+}
diff --git a/cpu/mpc8xx/Makefile b/cpu/mpc8xx/Makefile
index 223b30c..dbdc2e0 100644
--- a/cpu/mpc8xx/Makefile
+++ b/cpu/mpc8xx/Makefile
@@ -29,7 +29,7 @@
START = start.o kgdb.o
COBJS = bedbug_860.o commproc.o cpu.o cpu_init.o \
- fec.o i2c.o interrupts.o lcd.o scc.o \
+ fec.o fdt.o i2c.o interrupts.o lcd.o scc.o \
serial.o speed.o spi.o \
traps.o upatch.o video.o
SOBJS = plprcr_write.o
diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c
index 5d4ab82..ec6a3fd 100644
--- a/cpu/mpc8xx/cpu.c
+++ b/cpu/mpc8xx/cpu.c
@@ -634,17 +634,4 @@
immr->im_siu_conf.sc_swsr = 0xaa39; /* write magic2 */
# endif /* CONFIG_LWMON */
}
-
#endif /* CONFIG_WATCHDOG */
-
-/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
-void ft_cpu_setup (void *blob, bd_t *bd)
-{
- char * cpu_path = "/cpus/" OF_CPU;
-
- do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
- do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
-}
-#endif /* CONFIG_OF_LIBFDT */
diff --git a/cpu/mpc8xx/fdt.c b/cpu/mpc8xx/fdt.c
new file mode 100644
index 0000000..567094a
--- /dev/null
+++ b/cpu/mpc8xx/fdt.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2008 (C) Bryan O'Donoghue
+ *
+ * Code copied & edited from Freescale mpc85xx stuff.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", get_tbclk(), 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", bd->bi_intfreq, 1);
+ do_fixup_by_compat_u32(blob, "fsl,cpm-brg", "clock-frequency",
+ gd->brg_clk, 1);
+
+ /* Fixup ethernet MAC addresses */
+ fdt_fixup_ethernet(blob, bd);
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
index 11b0893..070babc 100644
--- a/cpu/mpc8xx/speed.c
+++ b/cpu/mpc8xx/speed.c
@@ -174,6 +174,27 @@
#endif
+void get_brgclk(uint sccr)
+{
+ uint divider = 0;
+
+ switch((sccr&SCCR_DFBRG11)>>11){
+ case 0:
+ divider = 1;
+ break;
+ case 1:
+ divider = 4;
+ break;
+ case 2:
+ divider = 16;
+ break;
+ case 3:
+ divider = 64;
+ break;
+ }
+ gd->brg_clk = gd->cpu_clk/divider;
+}
+
#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
/*
@@ -223,6 +244,8 @@
gd->bus_clk = gd->cpu_clk / 2;
}
+ get_brgclk(sccr);
+
return (0);
}
@@ -254,6 +277,8 @@
gd->cpu_clk = measure_gclk ();
#endif
+ get_brgclk(immr->im_clkrst.car_sccr);
+
/* if cpu clock <= 66 MHz then set bus division factor to 1,
* otherwise set it to 2
*/
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 3bafea3..9e722b9 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -42,7 +42,8 @@
#include <asm/mmu.h>
#if defined(CONFIG_SPD_EEPROM) && \
- (defined(CONFIG_440SP) || defined(CONFIG_440SPE))
+ (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT))
/*-----------------------------------------------------------------------------+
* Defines
@@ -579,6 +580,13 @@
ppc440sp_sdram_register_dump();
+ /*
+ * Clear potential errors resulting from auto-calibration.
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ set_mcsr(get_mcsr());
+
return dram_size;
}
@@ -2125,6 +2133,7 @@
unsigned long baseadd_size;
unsigned long i;
unsigned long bank_0_populated = 0;
+ unsigned long total_size = 0;
/*------------------------------------------------------------------
* Reset the rank_base_address.
@@ -2147,28 +2156,38 @@
* Set the sizes
*-----------------------------------------------------------------*/
baseadd_size = 0;
- rank_size_bytes = 4 * 1024 * 1024 * rank_size_id;
switch (rank_size_id) {
+ case 0x01:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_1024;
+ total_size = 1024;
+ break;
case 0x02:
- baseadd_size |= SDRAM_RXBAS_SDSZ_8;
+ baseadd_size |= SDRAM_RXBAS_SDSZ_2048;
+ total_size = 2048;
break;
case 0x04:
- baseadd_size |= SDRAM_RXBAS_SDSZ_16;
+ baseadd_size |= SDRAM_RXBAS_SDSZ_4096;
+ total_size = 4096;
break;
case 0x08:
baseadd_size |= SDRAM_RXBAS_SDSZ_32;
+ total_size = 32;
break;
case 0x10:
baseadd_size |= SDRAM_RXBAS_SDSZ_64;
+ total_size = 64;
break;
case 0x20:
baseadd_size |= SDRAM_RXBAS_SDSZ_128;
+ total_size = 128;
break;
case 0x40:
baseadd_size |= SDRAM_RXBAS_SDSZ_256;
+ total_size = 256;
break;
case 0x80:
baseadd_size |= SDRAM_RXBAS_SDSZ_512;
+ total_size = 512;
break;
default:
printf("DDR-SDRAM: DIMM %d memory queue configuration.\n",
@@ -2178,6 +2197,7 @@
printf("Replace the DIMM module with a supported DIMM.\n\n");
spd_ddr_init_hang ();
}
+ rank_size_bytes = total_size << 20;
if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1))
bank_0_populated = 1;
@@ -2190,6 +2210,19 @@
}
}
}
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ /*
+ * Enable high bandwidth access on 460EX/GT.
+ * This should/could probably be done on other
+ * PPC's too, like 440SPe.
+ * This is currently not used, but with this setup
+ * it is possible to use it later on in e.g. the Linux
+ * EMAC driver for performance gain.
+ */
+ mtdcr(SDRAM_PLBADDULL, 0x00000000); /* MQ0_BAUL */
+ mtdcr(SDRAM_PLBADDUHB, 0x00000008); /* MQ0_BAUH */
+#endif
}
/*-----------------------------------------------------------------------------+
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 599f5ce..d990250 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -137,17 +137,32 @@
#define BI_PHYMODE_RTBI 4
#define BI_PHYMODE_TBI 5
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
#define BI_PHYMODE_SMII 6
#define BI_PHYMODE_MII 7
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define BI_PHYMODE_RMII 8
+#endif
#endif
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1))
#endif
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define SDR0_ETH_CFG_CLK_SEL_V(n) (0x01 << (8 + n))
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define MAL_RX_CHAN_MUL 8 /* 460EX/GT uses MAL channel 8 for EMAC1 */
+#else
+#define MAL_RX_CHAN_MUL 1
+#endif
+
/*-----------------------------------------------------------------------------+
* Global variables. TX and RX descriptors and buffers.
*-----------------------------------------------------------------------------*/
@@ -214,6 +229,44 @@
int board_emac_count(void);
+static void emac_loopback_enable(EMAC_4XX_HW_PST hw_p)
+{
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
+ u32 val;
+
+ mfsdr(sdr_mfr, val);
+ val |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
+ mtsdr(sdr_mfr, val);
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ u32 val;
+
+ mfsdr(SDR0_ETH_CFG, val);
+ val |= SDR0_ETH_CFG_CLK_SEL_V(hw_p->devnum);
+ mtsdr(SDR0_ETH_CFG, val);
+#endif
+}
+
+static void emac_loopback_disable(EMAC_4XX_HW_PST hw_p)
+{
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
+ u32 val;
+
+ mfsdr(sdr_mfr, val);
+ val &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
+ mtsdr(sdr_mfr, val);
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ u32 val;
+
+ mfsdr(SDR0_ETH_CFG, val);
+ val &= ~SDR0_ETH_CFG_CLK_SEL_V(hw_p->devnum);
+ mtsdr(SDR0_ETH_CFG, val);
+#endif
+}
+
/*-----------------------------------------------------------------------------+
| ppc_4xx_eth_halt
| Disable MAL channel, and EMACn
@@ -222,11 +275,6 @@
{
EMAC_4XX_HW_PST hw_p = dev->priv;
uint32_t failsafe = 10000;
-#if defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
- unsigned long mfr;
-#endif
out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */
@@ -247,27 +295,14 @@
break;
}
- /* EMAC RESET */
-#if defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
/* provide clocks for EMAC internal loopback */
- mfsdr (sdr_mfr, mfr);
- mfr |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
- mtsdr(sdr_mfr, mfr);
-#endif
+ emac_loopback_enable(hw_p);
+ /* EMAC RESET */
out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
-#if defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
/* remove clocks for EMAC internal loopback */
- mfsdr (sdr_mfr, mfr);
- mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
- mtsdr(sdr_mfr, mfr);
-#endif
-
+ emac_loopback_disable(hw_p);
#ifndef CONFIG_NETCONSOLE
hw_p->print_speed = 1; /* print speed message again next time */
@@ -452,6 +487,187 @@
}
#endif /* CONFIG_405EX */
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
+{
+ u32 eth_cfg;
+ u32 zmiifer; /* ZMII0_FER reg. */
+ u32 rmiifer; /* RGMII0_FER reg. Bridge 0 */
+ u32 rmiifer1; /* RGMII0_FER reg. Bridge 1 */
+
+ zmiifer = 0;
+ rmiifer = 0;
+ rmiifer1 = 0;
+
+ /* TODO:
+ * NOTE: 460GT has 2 RGMII bridge cores:
+ * emac0 ------ RGMII0_BASE
+ * |
+ * emac1 -----+
+ *
+ * emac2 ------ RGMII1_BASE
+ * |
+ * emac3 -----+
+ *
+ * 460EX has 1 RGMII bridge core:
+ * and RGMII1_BASE is disabled
+ * emac0 ------ RGMII0_BASE
+ * |
+ * emac1 -----+
+ */
+
+ /*
+ * Right now only 2*RGMII is supported. Please extend when needed.
+ * sr - 2008-02-19
+ */
+ switch (9) {
+ case 1:
+ /* 1 MII - 460EX */
+ /* GMC0 EMAC4_0, ZMII Bridge */
+ zmiifer |= ZMII_FER_MII << ZMII_FER_V(0);
+ bis->bi_phymode[0] = BI_PHYMODE_MII;
+ bis->bi_phymode[1] = BI_PHYMODE_NONE;
+ bis->bi_phymode[2] = BI_PHYMODE_NONE;
+ bis->bi_phymode[3] = BI_PHYMODE_NONE;
+ break;
+ case 2:
+ /* 2 MII - 460GT */
+ /* GMC0 EMAC4_0, GMC1 EMAC4_2, ZMII Bridge */
+ zmiifer |= ZMII_FER_MII << ZMII_FER_V(0);
+ zmiifer |= ZMII_FER_MII << ZMII_FER_V(2);
+ bis->bi_phymode[0] = BI_PHYMODE_MII;
+ bis->bi_phymode[1] = BI_PHYMODE_NONE;
+ bis->bi_phymode[2] = BI_PHYMODE_MII;
+ bis->bi_phymode[3] = BI_PHYMODE_NONE;
+ break;
+ case 3:
+ /* 2 RMII - 460EX */
+ /* GMC0 EMAC4_0, GMC0 EMAC4_1, ZMII Bridge */
+ zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0);
+ zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1);
+ bis->bi_phymode[0] = BI_PHYMODE_RMII;
+ bis->bi_phymode[1] = BI_PHYMODE_RMII;
+ bis->bi_phymode[2] = BI_PHYMODE_NONE;
+ bis->bi_phymode[3] = BI_PHYMODE_NONE;
+ break;
+ case 4:
+ /* 4 RMII - 460GT */
+ /* GMC0 EMAC4_0, GMC0 EMAC4_1, GMC1 EMAC4_2, GMC1, EMAC4_3 */
+ /* ZMII Bridge */
+ zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0);
+ zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1);
+ zmiifer |= ZMII_FER_RMII << ZMII_FER_V(2);
+ zmiifer |= ZMII_FER_RMII << ZMII_FER_V(3);
+ bis->bi_phymode[0] = BI_PHYMODE_RMII;
+ bis->bi_phymode[1] = BI_PHYMODE_RMII;
+ bis->bi_phymode[2] = BI_PHYMODE_RMII;
+ bis->bi_phymode[3] = BI_PHYMODE_RMII;
+ break;
+ case 5:
+ /* 2 SMII - 460EX */
+ /* GMC0 EMAC4_0, GMC0 EMAC4_1, ZMII Bridge */
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0);
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1);
+ bis->bi_phymode[0] = BI_PHYMODE_SMII;
+ bis->bi_phymode[1] = BI_PHYMODE_SMII;
+ bis->bi_phymode[2] = BI_PHYMODE_NONE;
+ bis->bi_phymode[3] = BI_PHYMODE_NONE;
+ break;
+ case 6:
+ /* 4 SMII - 460GT */
+ /* GMC0 EMAC4_0, GMC0 EMAC4_1, GMC0 EMAC4_3, GMC0 EMAC4_3 */
+ /* ZMII Bridge */
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0);
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1);
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(2);
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(3);
+ bis->bi_phymode[0] = BI_PHYMODE_SMII;
+ bis->bi_phymode[1] = BI_PHYMODE_SMII;
+ bis->bi_phymode[2] = BI_PHYMODE_SMII;
+ bis->bi_phymode[3] = BI_PHYMODE_SMII;
+ break;
+ case 7:
+ /* This is the default mode that we want for board bringup - Maple */
+ /* 1 GMII - 460EX */
+ /* GMC0 EMAC4_0, RGMII Bridge 0 */
+ rmiifer |= RGMII_FER_MDIO(0);
+
+ if (devnum == 0) {
+ rmiifer |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC0 */
+ bis->bi_phymode[0] = BI_PHYMODE_GMII;
+ bis->bi_phymode[1] = BI_PHYMODE_NONE;
+ bis->bi_phymode[2] = BI_PHYMODE_NONE;
+ bis->bi_phymode[3] = BI_PHYMODE_NONE;
+ } else {
+ rmiifer |= RGMII_FER_GMII << RGMII_FER_V(3); /* CH1CFG - EMAC1 */
+ bis->bi_phymode[0] = BI_PHYMODE_NONE;
+ bis->bi_phymode[1] = BI_PHYMODE_GMII;
+ bis->bi_phymode[2] = BI_PHYMODE_NONE;
+ bis->bi_phymode[3] = BI_PHYMODE_NONE;
+ }
+ break;
+ case 8:
+ /* 2 GMII - 460GT */
+ /* GMC0 EMAC4_0, RGMII Bridge 0 */
+ /* GMC1 EMAC4_2, RGMII Bridge 1 */
+ rmiifer |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC0 */
+ rmiifer1 |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC2 */
+ rmiifer |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC0 */
+ rmiifer1 |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC2 */
+
+ bis->bi_phymode[0] = BI_PHYMODE_GMII;
+ bis->bi_phymode[1] = BI_PHYMODE_NONE;
+ bis->bi_phymode[2] = BI_PHYMODE_GMII;
+ bis->bi_phymode[3] = BI_PHYMODE_NONE;
+ break;
+ case 9:
+ /* 2 RGMII - 460EX */
+ /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
+ rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2);
+ rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3);
+ rmiifer |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC0 */
+
+ bis->bi_phymode[0] = BI_PHYMODE_RGMII;
+ bis->bi_phymode[1] = BI_PHYMODE_RGMII;
+ bis->bi_phymode[2] = BI_PHYMODE_NONE;
+ bis->bi_phymode[3] = BI_PHYMODE_NONE;
+ break;
+ case 10:
+ /* 4 RGMII - 460GT */
+ /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
+ /* GMC1 EMAC4_2, GMC1 EMAC4_3, RGMII Bridge 1 */
+ rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2);
+ rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3);
+ rmiifer1 |= RGMII_FER_RGMII << RGMII_FER_V(2);
+ rmiifer1 |= RGMII_FER_RGMII << RGMII_FER_V(3);
+ bis->bi_phymode[0] = BI_PHYMODE_RGMII;
+ bis->bi_phymode[1] = BI_PHYMODE_RGMII;
+ bis->bi_phymode[2] = BI_PHYMODE_RGMII;
+ bis->bi_phymode[3] = BI_PHYMODE_RGMII;
+ break;
+ default:
+ break;
+ }
+
+ /* Set EMAC for MDIO */
+ mfsdr(SDR0_ETH_CFG, eth_cfg);
+ eth_cfg |= SDR0_ETH_CFG_MDIO_SEL_EMAC0;
+ mtsdr(SDR0_ETH_CFG, eth_cfg);
+
+ out_be32((void *)RGMII_FER, rmiifer);
+#if defined(CONFIG_460GT)
+ out_be32((void *)RGMII_FER + RGMII1_BASE_OFFSET, rmiifer1);
+#endif
+
+ /* bypass the TAHOE0/TAHOE1 cores for U-Boot */
+ mfsdr(SDR0_ETH_CFG, eth_cfg);
+ eth_cfg |= (SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS);
+ mtsdr(SDR0_ETH_CFG, eth_cfg);
+
+ return 0;
+}
+#endif /* CONFIG_460EX || CONFIG_460GT */
+
static inline void *malloc_aligned(u32 size, u32 align)
{
return (void *)(((u32)malloc(size + align) + align - 1) &
@@ -472,19 +688,16 @@
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
sys_info_t sysinfo;
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
int ethgroup = -1;
#endif
#endif
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_405EX)
- unsigned long mfr;
-#endif
u32 bd_cached;
u32 bd_uncached = 0;
#ifdef CONFIG_4xx_DCACHE
@@ -503,6 +716,7 @@
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
/* Need to get the OPB frequency so we can access the PHY */
get_sys_info (&sysinfo);
@@ -556,21 +770,12 @@
out_be32((void *)ZMII_FER, 0);
udelay (100);
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440GP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
out_be32((void *)ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
-#elif defined(CONFIG_440GX) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#elif defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
-#elif defined(CONFIG_440GP)
- /* set RMII mode */
- out_be32((void *)ZMII_FER, ZMII_RMII | ZMII_MDI0);
-#else
- if ((devnum == 0) || (devnum == 1)) {
- out_be32((void *)ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
- } else { /* ((devnum == 2) || (devnum == 3)) */
- out_be32((void *)ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum));
- out_be32((void *)RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) |
- (RGMII_FER_RGMII << RGMII_FER_V (3))));
- }
#endif
out_be32((void *)ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum));
@@ -579,20 +784,17 @@
ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
#endif
- __asm__ volatile ("eieio");
+ sync();
- /* reset emac so we have access to the phy */
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
/* provide clocks for EMAC internal loopback */
- mfsdr (sdr_mfr, mfr);
- mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
- mtsdr(sdr_mfr, mfr);
-#endif
+ emac_loopback_enable(hw_p);
+ /* EMAC RESET */
out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
+ /* remove clocks for EMAC internal loopback */
+ emac_loopback_disable(hw_p);
+
failsafe = 1000;
while ((in_be32((void *)EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) {
udelay (1000);
@@ -601,18 +803,10 @@
if (failsafe <= 0)
printf("\nProblem resetting EMAC!\n");
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
- /* remove clocks for EMAC internal loopback */
- mfsdr (sdr_mfr, mfr);
- mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
- mtsdr(sdr_mfr, mfr);
-#endif
-
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
/* Whack the M1 register */
mode_reg = 0x0;
@@ -674,6 +868,7 @@
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
#if defined(CONFIG_CIS8201_PHY)
@@ -772,8 +967,10 @@
hw_p->devnum);
}
-#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
- !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
+#if defined(CONFIG_440) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
+ !defined(CONFIG_460EX) && !defined(CONFIG_460GT)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_mfr, reg);
if (speed == 100) {
@@ -807,6 +1004,7 @@
#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
if (speed == 1000)
reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum));
@@ -819,12 +1017,17 @@
return -1;
}
out_be32((void *)RGMII_SSR, reg);
+#if defined(CONFIG_460GT)
+ if ((devnum == 2) || (devnum == 3))
+ out_be32((void *)RGMII_SSR + RGMII1_BASE_OFFSET, reg);
+#endif
#endif
/* set the Mal configuration reg */
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
@@ -926,9 +1129,16 @@
mtdcr (maltxbattr, 0x0);
mtdcr (malrxbattr, 0x0);
#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ mtdcr (malrxctp8r, hw_p->rx);
+ /* set RX buffer size */
+ mtdcr (malrcbs8, ENET_MAX_MTU_ALIGNED / 16);
+#else
mtdcr (malrxctp1r, hw_p->rx_phys);
/* set RX buffer size */
mtdcr (malrcbs1, ENET_MAX_MTU_ALIGNED / 16);
+#endif
break;
#if defined (CONFIG_440GX)
case 2:
@@ -1087,7 +1297,7 @@
hw_p->tx[hw_p->tx_slot].data_len = (short) len;
hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_READY;
- __asm__ volatile ("eieio");
+ sync();
out_be32((void *)EMAC_TXM0 + hw_p->hw_addr,
in_be32((void *)EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0);
@@ -1127,15 +1337,31 @@
*/
#define UIC0MSR uic1msr
#define UIC0SR uic1sr
+#define UIC1MSR uic1msr
+#define UIC1SR uic1sr
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+/*
+ * Hack: On 460EX/GT all enet irq sources are located on UIC2
+ * Needs some cleanup. --ag
+ */
+#define UIC0MSR uic2msr
+#define UIC0SR uic2sr
+#define UIC1MSR uic2msr
+#define UIC1SR uic2sr
#else
#define UIC0MSR uic0msr
#define UIC0SR uic0sr
+#define UIC1MSR uic1msr
+#define UIC1SR uic1sr
#endif
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_405EX)
#define UICMSR_ETHX uic0msr
#define UICSR_ETHX uic0sr
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define UICMSR_ETHX uic2msr
+#define UICSR_ETHX uic2sr
#else
#define UICMSR_ETHX uic1msr
#define UICSR_ETHX uic1sr
@@ -1173,7 +1399,7 @@
serviced = 0;
my_uic0msr = mfdcr (UIC0MSR);
- my_uic1msr = mfdcr (uic1msr);
+ my_uic1msr = mfdcr (UIC1MSR);
#if defined(CONFIG_440GX)
my_uic2msr = mfdcr (uic2msr);
#endif
@@ -1219,7 +1445,7 @@
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
mtdcr (UICSR_ETHX, UIC_ETH0); /* Clear */
return (rc); /* we had errors so get out */
}
@@ -1238,7 +1464,7 @@
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
mtdcr (UICSR_ETHX, UIC_ETH1); /* Clear */
return (rc); /* we had errors so get out */
}
@@ -1256,7 +1482,7 @@
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
mtdcr (uic2sr, UIC_ETH2);
return (rc); /* we had errors so get out */
}
@@ -1274,7 +1500,7 @@
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
mtdcr (uic2sr, UIC_ETH3);
return (rc); /* we had errors so get out */
}
@@ -1292,7 +1518,9 @@
/* check for EOB on valid channels */
if (my_uic0msr & UIC_MRE) {
mal_rx_eob = mfdcr (malrxeobisr);
- if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel x */
+ if ((mal_rx_eob &
+ (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL)))
+ != 0) { /* call emac routine for channel x */
/* clear EOB
mtdcr(malrxeobisr, mal_rx_eob); */
enet_rcv (dev, emac_isr);
@@ -1303,7 +1531,7 @@
}
mtdcr (UIC0SR, UIC_MRE); /* Clear */
- mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
switch (hw_p->devnum) {
case 0:
mtdcr (UICSR_ETHX, UIC_ETH0);
@@ -1468,7 +1696,7 @@
int loop_count = 0;
rx_eob_isr = mfdcr (malrxeobisr);
- if ((0x80000000 >> hw_p->devnum) & rx_eob_isr) {
+ if ((0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL)) & rx_eob_isr) {
/* clear EOB */
mtdcr (malrxeobisr, rx_eob_isr);
@@ -1482,7 +1710,7 @@
loop_count++;
handled++;
- data_len = (unsigned long) hw_p->rx[i].data_len; /* Get len */
+ data_len = (unsigned long) hw_p->rx[i].data_len & 0x0fff; /* Get len */
if (data_len) {
if (data_len > ENET_MAX_MTU) /* Check len */
data_len = 0;
@@ -1568,7 +1796,7 @@
msr = mfmsr ();
mtmsr (msr & ~(MSR_EE));
- length = hw_p->rx[user_index].data_len;
+ length = hw_p->rx[user_index].data_len & 0x0fff;
/* Pass the packet up to the protocol layers. */
/* NetReceive(NetRxPackets[rxIdx], length - 4); */
@@ -1718,6 +1946,7 @@
/* set the MAL IER ??? names may change with new spec ??? */
#if defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
mal_ier =
MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE |
diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c
index a5b9690..941d4dc 100644
--- a/cpu/ppc4xx/4xx_pci.c
+++ b/cpu/ppc4xx/4xx_pci.c
@@ -531,7 +531,8 @@
out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
out32r( PCIX0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
#elif defined(PCIX0_BRDGOPT1)
@@ -549,7 +550,8 @@
out32r( PCIX0_POM0SA, 0 ); /* disable */
out32r( PCIX0_POM1SA, 0 ); /* disable */
out32r( PCIX0_POM2SA, 0 ); /* disable */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
out32r( PCIX0_POM0LAL, 0x10000000 );
out32r( PCIX0_POM0LAH, 0x0000000c );
#else
@@ -586,7 +588,8 @@
int busno;
busno = pci_440_init (&ppc440_hose);
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
pcie_setup_hoses(busno + 1);
#endif
}
diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c
index 3af9862..f9a1988 100644
--- a/cpu/ppc4xx/4xx_pcie.c
+++ b/cpu/ppc4xx/4xx_pcie.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2006 - 2007
+ * (C) Copyright 2006 - 2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (c) 2005 Cisco Systems. All rights reserved.
@@ -31,7 +31,8 @@
#include <common.h>
#include <pci.h>
-#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX)) && \
+#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
defined(CONFIG_PCI)
#include <asm/4xx_pcie.h>
@@ -306,9 +307,8 @@
int err = 0;
/* SDR0_PEGPLLLCT1 reset */
- if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
+ if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000))
printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0);
- }
valPE0 = SDR_READ(PESDR0_RCSSET);
valPE1 = SDR_READ(PESDR1_RCSSET);
@@ -400,7 +400,108 @@
}
return 0;
}
-#else
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+static void ppc4xx_setup_utl(u32 port)
+{
+ volatile void *utl_base = NULL;
+
+ /*
+ * Map UTL registers at 0x0801_n000 (4K 0xfff mask) PEGPLn_REGMSK
+ */
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CFG_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CFG_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* BAM 11100000=4KB */
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
+ break;
+
+ case 1:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CFG_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CFG_PCIE0_UTLBASE)
+ + 0x1000);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* BAM 11100000=4KB */
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
+ break;
+ }
+ utl_base = (unsigned int *)(CFG_PCIE_BASE + 0x1000 * port);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(utl_base + PEUTL_PBCTL, 0x0800000c); /* PLBME, CRRE */
+ out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000); /* OPD = 512 Bytes */
+ out_be32(utl_base + PEUTL_PBBSZ, 0x00000000); /* Max 512 Bytes */
+ out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000);
+ out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000); /* IPD = 512 Bytes */
+ out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(utl_base + PEUTL_PCTL, 0x80800066); /* VRB,TXE,timeout=default */
+}
+
+/*
+ * TODO: double check PCI express SDR based on the latest user manual
+ * Some registers specified here no longer exist.. has to be
+ * updated based on the final EAS spec.
+ */
+static int check_error(void)
+{
+ u32 valPE0, valPE1;
+ int err = 0;
+
+ valPE0 = SDR_READ(SDRN_PESDR_RCSSET(0));
+ valPE1 = SDR_READ(SDRN_PESDR_RCSSET(1));
+
+ /* SDR0_PExRCSSET rstgu */
+ if (!(valPE0 & PESDRx_RCSSET_RSTGU) || !(valPE1 & PESDRx_RCSSET_RSTGU)) {
+ printf("PCIE: SDR0_PExRCSSET rstgu error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstdl */
+ if (!(valPE0 & PESDRx_RCSSET_RSTDL) || !(valPE1 & PESDRx_RCSSET_RSTDL)) {
+ printf("PCIE: SDR0_PExRCSSET rstdl error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstpyn */
+ if ((valPE0 & PESDRx_RCSSET_RSTPYN) || (valPE1 & PESDRx_RCSSET_RSTPYN)) {
+ printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET hldplb */
+ if ((valPE0 & PESDRx_RCSSET_HLDPLB) || (valPE1 & PESDRx_RCSSET_HLDPLB)) {
+ printf("PCIE: SDR0_PExRCSSET hldplb error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rdy */
+ if ((valPE0 & PESDRx_RCSSET_RDY) || (valPE1 & PESDRx_RCSSET_RDY)) {
+ printf("PCIE: SDR0_PExRCSSET rdy error\n");
+ err = -1;
+ }
+
+ return err;
+}
+
+/*
+ * Initialize PCI Express core as described in User Manual
+ * TODO: double check PE SDR PLL Register with the updated user manual.
+ */
+int ppc4xx_init_pcie(void)
+{
+ if (check_error())
+ return -1;
+
+ return 0;
+}
+#endif /* CONFIG_460EX */
+
+#if defined(CONFIG_405EX)
static void ppc4xx_setup_utl(u32 port)
{
u32 utl_base;
@@ -450,7 +551,7 @@
*/
return 0;
}
-#endif
+#endif /* CONFIG_405EX */
/*
* Board-specific pcie initialization
@@ -511,6 +612,82 @@
}
#endif /* CONFIG_440SPE */
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+int __ppc4xx_init_pcie_port_hw(int port, int rootport)
+{
+ u32 val = 1 << 24;
+ u32 utlset1;
+
+ if (rootport) {
+ val = PTYPE_ROOT_PORT << 20;
+ utlset1 = 0x21222222;
+ } else {
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ utlset1 = 0x20222222;
+ }
+
+ if (port == 0) {
+ val |= LNKW_X1 << 12;
+ } else {
+ val |= LNKW_X4 << 12;
+ utlset1 |= 0x00101101;
+ }
+
+ SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
+ SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
+ SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01210000);
+
+ switch (port) {
+ case 0:
+ SDR_WRITE(PESDR0_L0CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR0_L0DRV, 0x00000136);
+ SDR_WRITE(PESDR0_L0CLK, 0x00000006);
+
+ SDR_WRITE(PESDR0_PHY_CTL_RST,0x10000000);
+ break;
+
+ case 1:
+ SDR_WRITE(PESDR1_L0CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L1CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L2CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L3CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L0DRV, 0x00000136);
+ SDR_WRITE(PESDR1_L1DRV, 0x00000136);
+ SDR_WRITE(PESDR1_L2DRV, 0x00000136);
+ SDR_WRITE(PESDR1_L3DRV, 0x00000136);
+ SDR_WRITE(PESDR1_L0CLK, 0x00000006);
+ SDR_WRITE(PESDR1_L1CLK, 0x00000006);
+ SDR_WRITE(PESDR1_L2CLK, 0x00000006);
+ SDR_WRITE(PESDR1_L3CLK, 0x00000006);
+
+ SDR_WRITE(PESDR1_PHY_CTL_RST,0x10000000);
+ break;
+ }
+
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), SDR_READ(SDRN_PESDR_RCSSET(port)) |
+ (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+ /* Poll for PHY reset */
+ switch (port) {
+ case 0:
+ while (!(SDR_READ(PESDR0_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ case 1:
+ while (!(SDR_READ(PESDR1_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ }
+
+ SDR_WRITE(SDRN_PESDR_RCSSET(port),
+ (SDR_READ(SDRN_PESDR_RCSSET(port)) &
+ ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+ PESDRx_RCSSET_RSTPYN);
+
+ return 0;
+}
+#endif /* CONFIG_440SPE */
+
#if defined(CONFIG_405EX)
int __ppc4xx_init_pcie_port_hw(int port, int rootport)
{
@@ -564,12 +741,12 @@
* range (hangs the core upon config transaction attempts when set
* otherwise) while revA uses c_nnnn_nnnn.
*
- * For revA:
+ * For 440SPe revA:
* PCIE0: 0xc_4000_0000
* PCIE1: 0xc_8000_0000
* PCIE2: 0xc_c000_0000
*
- * For revB:
+ * For 440SPe revB:
* PCIE0: 0xd_0000_0000
* PCIE1: 0xd_2000_0000
* PCIE2: 0xd_4000_0000
@@ -577,6 +754,10 @@
* For 405EX:
* PCIE0: 0xa000_0000
* PCIE1: 0xc000_0000
+ *
+ * For 460EX/GT:
+ * PCIE0: 0xd_0000_0000
+ * PCIE1: 0xd_2000_0000
*/
static inline u64 ppc4xx_get_cfgaddr(int port)
{
@@ -609,6 +790,12 @@
}
}
#endif
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ if (port == 0)
+ return 0x0000000d00000000ULL;
+ else
+ return 0x0000000d20000000ULL;
+#endif
}
/*
diff --git a/cpu/ppc4xx/4xx_uart.c b/cpu/ppc4xx/4xx_uart.c
index 3d1124e..ffbc222 100644
--- a/cpu/ppc4xx/4xx_uart.c
+++ b/cpu/ppc4xx/4xx_uart.c
@@ -64,16 +64,22 @@
#if defined(CONFIG_440)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300
-#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define UART0_BASE (CFG_PERIPHERAL_BASE + 0x00000300)
+#define UART1_BASE (CFG_PERIPHERAL_BASE + 0x00000400)
#else
-#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200
-#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300
+#define UART0_BASE (CFG_PERIPHERAL_BASE + 0x00000200)
+#define UART1_BASE (CFG_PERIPHERAL_BASE + 0x00000300)
#endif
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000600
+#define UART2_BASE (CFG_PERIPHERAL_BASE + 0x00000600)
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define UART2_BASE (CFG_PERIPHERAL_BASE + 0x00000500)
+#define UART3_BASE (CFG_PERIPHERAL_BASE + 0x00000600)
#endif
#if defined(CONFIG_440GP)
@@ -94,11 +100,13 @@
#define UART1_SDR sdr_uart1
#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPe)
+ defined(CONFIG_440SP) || defined(CONFIG_440SPe) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define UART2_SDR sdr_uart2
#endif
#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRx)
+ defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define UART3_SDR sdr_uart3
#endif
#define MFREG(a, d) mfsdr(a, d)
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 9e9c685..54cc256 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -54,7 +54,8 @@
#endif
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
unsigned long val;
mfsdr(sdr_sdstp1, val);
@@ -86,7 +87,8 @@
return (val & 0x80000000);
#endif
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
unsigned long val;
mfsdr(sdr_pci0, val);
@@ -167,6 +169,21 @@
static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
#endif
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "PCI",
+ "PCI",
+ "EBC (16 bits)",
+ "NAND (8 bits)",
+ "I2C (Addr 0x54)", /* A8 */
+ "I2C (Addr 0x52)", /* A4 */
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
+#endif
+
#if defined(CONFIG_405EZ)
#define SDR0_PINSTP_SHIFT 28
static char *bootstrap_str[] = {
@@ -257,8 +274,12 @@
puts("05");
#endif
#if defined(CONFIG_440)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ puts("60");
+#else
puts("40");
#endif
+#endif
switch (pvr) {
case PVR_405GP_RB:
@@ -448,6 +469,26 @@
strcpy(addstr, "No RAID 6 support");
break;
+ case PVR_460EX_RA:
+ puts("EX Rev. A");
+ strcpy(addstr, "No Security/Kasumi support");
+ break;
+
+ case PVR_460EX_SE_RA:
+ puts("EX Rev. A");
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+
+ case PVR_460GT_RA:
+ puts("GT Rev. A");
+ strcpy(addstr, "No Security/Kasumi support");
+ break;
+
+ case PVR_460GT_SE_RA:
+ puts("GT Rev. A");
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+
default:
printf (" UNKNOWN (PVR=%08x)", pvr);
break;
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 2e0dd6f..5d15e2f 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -302,5 +302,6 @@
}
#endif /* defined(CONFIG_405GP) */
#endif /* defined(CONFIG_405GP) || defined(CONFIG_405EP) */
+
return (0);
}
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 2f3dc32..698bcb5 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -38,7 +38,22 @@
DECLARE_GLOBAL_DATA_PTR;
-/****************************************************************************/
+/*
+ * Define the number of UIC's
+ */
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define UIC_MAX 4
+#elif defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
+#define UIC_MAX 3
+#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#define UIC_MAX 2
+#else
+#define UIC_MAX 1
+#endif
/*
* CPM interrupt vector functions.
@@ -49,28 +64,15 @@
int count;
};
-static struct irq_action irq_vecs[32];
-void uic0_interrupt( void * parms); /* UIC0 handler */
+static struct irq_action irq_vecs[UIC_MAX * 32];
-#if defined(CONFIG_440) || defined(CONFIG_405EX)
-static struct irq_action irq_vecs1[32]; /* For UIC1 */
+u32 get_dcr(u16);
+void set_dcr(u16, u32);
-void uic1_interrupt( void * parms); /* UIC1 handler */
+#if (UIC_MAX > 1) && !defined(CONFIG_440GX)
+static void uic_cascade_interrupt(void *para);
+#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-static struct irq_action irq_vecs2[32]; /* For UIC2 */
-void uic2_interrupt( void * parms); /* UIC2 handler */
-#endif /* CONFIG_440GX CONFIG_440SPE */
-
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-static struct irq_action irq_vecs3[32]; /* For UIC3 */
-void uic3_interrupt( void * parms); /* UIC3 handler */
-#endif /* CONFIG_440SPE */
-
-#endif /* CONFIG_440 */
-
-/****************************************************************************/
#if defined(CONFIG_440)
/* SPRN changed in 440 */
@@ -99,8 +101,6 @@
}
#endif /* defined(CONFIG_440 */
-/****************************************************************************/
-
int interrupt_init_cpu (unsigned *decrementer_count)
{
int vec;
@@ -112,26 +112,10 @@
/*
* Mark all irqs as free
*/
- for (vec=0; vec<32; vec++) {
+ for (vec = 0; vec < (UIC_MAX * 32); vec++) {
irq_vecs[vec].handler = NULL;
irq_vecs[vec].arg = NULL;
irq_vecs[vec].count = 0;
-#if defined(CONFIG_440) || defined(CONFIG_405EX)
- irq_vecs1[vec].handler = NULL;
- irq_vecs1[vec].arg = NULL;
- irq_vecs1[vec].count = 0;
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- irq_vecs2[vec].handler = NULL;
- irq_vecs2[vec].arg = NULL;
- irq_vecs2[vec].count = 0;
-#endif /* CONFIG_440GX */
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- irq_vecs3[vec].handler = NULL;
- irq_vecs3[vec].arg = NULL;
- irq_vecs3[vec].count = 0;
-#endif /* CONFIG_440SPE */
-#endif
}
#ifdef CONFIG_4xx
@@ -172,15 +156,21 @@
*/
set_evpr(0x00000000);
-#if defined(CONFIG_440) || defined(CONFIG_405EX)
#if !defined(CONFIG_440GX)
+#if (UIC_MAX > 1)
/* Install the UIC1 handlers */
- irq_install_handler(VECNUM_UIC1NC, uic1_interrupt, 0);
- irq_install_handler(VECNUM_UIC1C, uic1_interrupt, 0);
+ irq_install_handler(VECNUM_UIC1NC, uic_cascade_interrupt, 0);
+ irq_install_handler(VECNUM_UIC1C, uic_cascade_interrupt, 0);
#endif
+#if (UIC_MAX > 2)
+ irq_install_handler(VECNUM_UIC2NC, uic_cascade_interrupt, 0);
+ irq_install_handler(VECNUM_UIC2C, uic_cascade_interrupt, 0);
#endif
-
-#if defined(CONFIG_440GX)
+#if (UIC_MAX > 3)
+ irq_install_handler(VECNUM_UIC3NC, uic_cascade_interrupt, 0);
+ irq_install_handler(VECNUM_UIC3C, uic_cascade_interrupt, 0);
+#endif
+#else /* !defined(CONFIG_440GX) */
/* Take the GX out of compatibility mode
* Travis Sawyer, 9 Mar 2004
* NOTE: 440gx user manual inconsistency here
@@ -196,457 +186,200 @@
mtdcr(uicb0er, 0x54000000);
/* None are critical */
mtdcr(uicb0cr, 0);
-#endif
+#endif /* !defined(CONFIG_440GX) */
return (0);
}
-/****************************************************************************/
+/* Handler for UIC interrupt */
+static void uic_interrupt(u32 uic_base, int vec_base)
+{
+ u32 uic_msr;
+ u32 msr_shift;
+ int vec;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ uic_msr = get_dcr(uic_base + UIC_MSR);
+ msr_shift = uic_msr;
+ vec = vec_base;
+
+ while (msr_shift != 0) {
+ if (msr_shift & 0x80000000) {
+ /*
+ * Increment irq counter (for debug purpose only)
+ */
+ irq_vecs[vec].count++;
+
+ if (irq_vecs[vec].handler != NULL) {
+ /* call isr */
+ (*irq_vecs[vec].handler)(irq_vecs[vec].arg);
+ } else {
+ set_dcr(uic_base + UIC_ER,
+ get_dcr(uic_base + UIC_ER) &
+ ~(0x80000000 >> vec));
+ printf("Masking bogus interrupt vector %d"
+ " (UIC_BASE=0x%x)\n", vec, uic_base);
+ }
+
+ /*
+ * After servicing the interrupt, we have to remove the status indicator.
+ */
+ set_dcr(uic_base + UIC_SR, (0x80000000 >> vec));
+ }
+
+ /*
+ * Shift msr to next position and increment vector
+ */
+ msr_shift <<= 1;
+ vec++;
+ }
+}
+
+#if (UIC_MAX > 1) && !defined(CONFIG_440GX)
+static void uic_cascade_interrupt(void *para)
+{
+ external_interrupt(para);
+}
+#endif
+
+#if defined(CONFIG_440)
+#if defined(CONFIG_440GX)
+/* 440GX uses base uic register */
+#define UIC_BMSR uicb0msr
+#define UIC_BSR uicb0sr
+#else
+#define UIC_BMSR uic0msr
+#define UIC_BSR uic0sr
+#endif
+#else /* CONFIG_440 */
+#define UIC_BMSR uicmsr
+#define UIC_BSR uicsr
+#endif /* CONFIG_440 */
/*
* Handle external interrupts
*/
-#if defined(CONFIG_440GX)
void external_interrupt(struct pt_regs *regs)
{
- ulong uic_msr;
+ u32 uic_msr;
/*
* Read masked interrupt status register to determine interrupt source
*/
- /* 440 GX uses base uic register */
- uic_msr = mfdcr(uicb0msr);
+ uic_msr = mfdcr(UIC_BMSR);
- if ( (UICB0_UIC0CI & uic_msr) || (UICB0_UIC0NCI & uic_msr) )
- uic0_interrupt(0);
-
- if ( (UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr) )
- uic1_interrupt(0);
-
- if ( (UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr) )
- uic2_interrupt(0);
-
- mtdcr(uicb0sr, uic_msr);
-
- return;
-
-} /* external_interrupt CONFIG_440GX */
-
-#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-void external_interrupt(struct pt_regs *regs)
-{
- ulong uic_msr;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- /* 440 SPe uses base uic register */
- uic_msr = mfdcr(uic0msr);
-
- if ( (UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr) )
- uic1_interrupt(0);
-
- if ( (UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr) )
- uic2_interrupt(0);
-
- if (uic_msr & ~(UICB0_ALL))
- uic0_interrupt(0);
-
- mtdcr(uic0sr, uic_msr);
-
- return;
-
-} /* external_interrupt CONFIG_440EPX & CONFIG_440GRX */
-
-#elif defined(CONFIG_440SPE)
-void external_interrupt(struct pt_regs *regs)
-{
- ulong uic_msr;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- /* 440 SPe uses base uic register */
- uic_msr = mfdcr(uic0msr);
-
- if ( (UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr) )
- uic1_interrupt(0);
-
- if ( (UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr) )
- uic2_interrupt(0);
-
- if ( (UICB0_UIC3CI & uic_msr) || (UICB0_UIC3NCI & uic_msr) )
- uic3_interrupt(0);
-
- if (uic_msr & ~(UICB0_ALL))
- uic0_interrupt(0);
-
- mtdcr(uic0sr, uic_msr);
-
- return;
-} /* external_interrupt CONFIG_440SPE */
-
-#else
-
-void external_interrupt(struct pt_regs *regs)
-{
- ulong uic_msr;
- ulong msr_shift;
- int vec;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- uic_msr = mfdcr(uicmsr);
- msr_shift = uic_msr;
- vec = 0;
-
- while (msr_shift != 0) {
- if (msr_shift & 0x80000000) {
- /*
- * Increment irq counter (for debug purpose only)
- */
- irq_vecs[vec].count++;
-
- if (irq_vecs[vec].handler != NULL) {
- /* call isr */
- (*irq_vecs[vec].handler)(irq_vecs[vec].arg);
- } else {
- mtdcr(uicer, mfdcr(uicer) & ~(0x80000000 >> vec));
- printf ("Masking bogus interrupt vector 0x%x\n", vec);
- }
-
- /*
- * After servicing the interrupt, we have to remove the status indicator.
- */
- mtdcr(uicsr, (0x80000000 >> vec));
- }
-
- /*
- * Shift msr to next position and increment vector
- */
- msr_shift <<= 1;
- vec++;
- }
-}
+#if (UIC_MAX > 1)
+ if ((UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr))
+ uic_interrupt(UIC1_DCR_BASE, 32);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-/* Handler for UIC0 interrupt */
-void uic0_interrupt( void * parms)
-{
- ulong uic_msr;
- ulong msr_shift;
- int vec;
+#if (UIC_MAX > 2)
+ if ((UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr))
+ uic_interrupt(UIC2_DCR_BASE, 64);
+#endif
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- uic_msr = mfdcr(uicmsr);
- msr_shift = uic_msr;
- vec = 0;
+#if (UIC_MAX > 3)
+ if ((UICB0_UIC3CI & uic_msr) || (UICB0_UIC3NCI & uic_msr))
+ uic_interrupt(UIC3_DCR_BASE, 96);
+#endif
- while (msr_shift != 0) {
- if (msr_shift & 0x80000000) {
- /*
- * Increment irq counter (for debug purpose only)
- */
- irq_vecs[vec].count++;
+#if defined(CONFIG_440)
+#if !defined(CONFIG_440GX)
+ if (uic_msr & ~(UICB0_ALL))
+ uic_interrupt(UIC0_DCR_BASE, 0);
+#else
+ if ((UICB0_UIC0CI & uic_msr) || (UICB0_UIC0NCI & uic_msr))
+ uic_interrupt(UIC0_DCR_BASE, 0);
+#endif
+#else /* CONFIG_440 */
+ uic_interrupt(UIC0_DCR_BASE, 0);
+#endif /* CONFIG_440 */
- if (irq_vecs[vec].handler != NULL) {
- /* call isr */
- (*irq_vecs[vec].handler)(irq_vecs[vec].arg);
- } else {
- mtdcr(uicer, mfdcr(uicer) & ~(0x80000000 >> vec));
- printf ("Masking bogus interrupt vector (uic0) 0x%x\n", vec);
- }
+ mtdcr(UIC_BSR, uic_msr);
- /*
- * After servicing the interrupt, we have to remove the status indicator.
- */
- mtdcr(uicsr, (0x80000000 >> vec));
- }
-
- /*
- * Shift msr to next position and increment vector
- */
- msr_shift <<= 1;
- vec++;
- }
+ return;
}
-#endif /* CONFIG_440GX */
-
-#if defined(CONFIG_440) || defined(CONFIG_405EX)
-/* Handler for UIC1 interrupt */
-void uic1_interrupt( void * parms)
-{
- ulong uic1_msr;
- ulong msr_shift;
- int vec;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- uic1_msr = mfdcr(uic1msr);
- msr_shift = uic1_msr;
- vec = 0;
-
- while (msr_shift != 0) {
- if (msr_shift & 0x80000000) {
- /*
- * Increment irq counter (for debug purpose only)
- */
- irq_vecs1[vec].count++;
-
- if (irq_vecs1[vec].handler != NULL) {
- /* call isr */
- (*irq_vecs1[vec].handler)(irq_vecs1[vec].arg);
- } else {
- mtdcr(uic1er, mfdcr(uic1er) & ~(0x80000000 >> vec));
- printf ("Masking bogus interrupt vector (uic1) 0x%x\n", vec);
- }
-
- /*
- * After servicing the interrupt, we have to remove the status indicator.
- */
- mtdcr(uic1sr, (0x80000000 >> vec));
- }
-
- /*
- * Shift msr to next position and increment vector
- */
- msr_shift <<= 1;
- vec++;
- }
-}
-#endif /* defined(CONFIG_440) */
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-/* Handler for UIC2 interrupt */
-void uic2_interrupt( void * parms)
-{
- ulong uic2_msr;
- ulong msr_shift;
- int vec;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- uic2_msr = mfdcr(uic2msr);
- msr_shift = uic2_msr;
- vec = 0;
-
- while (msr_shift != 0) {
- if (msr_shift & 0x80000000) {
- /*
- * Increment irq counter (for debug purpose only)
- */
- irq_vecs2[vec].count++;
-
- if (irq_vecs2[vec].handler != NULL) {
- /* call isr */
- (*irq_vecs2[vec].handler)(irq_vecs2[vec].arg);
- } else {
- mtdcr(uic2er, mfdcr(uic2er) & ~(0x80000000 >> vec));
- printf ("Masking bogus interrupt vector (uic2) 0x%x\n", vec);
- }
-
- /*
- * After servicing the interrupt, we have to remove the status indicator.
- */
- mtdcr(uic2sr, (0x80000000 >> vec));
- }
-
- /*
- * Shift msr to next position and increment vector
- */
- msr_shift <<= 1;
- vec++;
- }
-}
-#endif /* defined(CONFIG_440GX) */
-
-#if defined(CONFIG_440SPE)
-/* Handler for UIC3 interrupt */
-void uic3_interrupt( void * parms)
-{
- ulong uic3_msr;
- ulong msr_shift;
- int vec;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- uic3_msr = mfdcr(uic3msr);
- msr_shift = uic3_msr;
- vec = 0;
-
- while (msr_shift != 0) {
- if (msr_shift & 0x80000000) {
- /*
- * Increment irq counter (for debug purpose only)
- */
- irq_vecs3[vec].count++;
-
- if (irq_vecs3[vec].handler != NULL) {
- /* call isr */
- (*irq_vecs3[vec].handler)(irq_vecs3[vec].arg);
- } else {
- mtdcr(uic3er, mfdcr(uic3er) & ~(0x80000000 >> vec));
- printf ("Masking bogus interrupt vector (uic3) 0x%x\n", vec);
- }
-
- /*
- * After servicing the interrupt, we have to remove the status indicator.
- */
- mtdcr(uic3sr, (0x80000000 >> vec));
- }
-
- /*
- * Shift msr to next position and increment vector
- */
- msr_shift <<= 1;
- vec++;
- }
-}
-#endif /* defined(CONFIG_440SPE) */
-
-/****************************************************************************/
-
/*
* Install and free a interrupt handler.
*/
-
-void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
+void irq_install_handler(int vec, interrupt_handler_t * handler, void *arg)
{
- struct irq_action *irqa = irq_vecs;
- int i = vec;
-
-#if defined(CONFIG_440) || defined(CONFIG_405EX)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- if ((vec > 31) && (vec < 64)) {
- i = vec - 32;
- irqa = irq_vecs1;
- } else if (vec > 63) {
- i = vec - 64;
- irqa = irq_vecs2;
- }
-#else /* CONFIG_440GX */
- if (vec > 31) {
- i = vec - 32;
- irqa = irq_vecs1;
- }
-#endif /* CONFIG_440GX */
-#endif /* CONFIG_440 */
+ int i;
/*
- * print warning when replacing with a different irq vector
+ * Print warning when replacing with a different irq vector
*/
- if ((irqa[i].handler != NULL) && (irqa[i].handler != handler)) {
- printf ("Interrupt vector %d: handler 0x%x replacing 0x%x\n",
- vec, (uint) handler, (uint) irqa[i].handler);
+ if ((irq_vecs[vec].handler != NULL) && (irq_vecs[vec].handler != handler)) {
+ printf("Interrupt vector %d: handler 0x%x replacing 0x%x\n",
+ vec, (uint) handler, (uint) irq_vecs[vec].handler);
}
- irqa[i].handler = handler;
- irqa[i].arg = arg;
+ irq_vecs[vec].handler = handler;
+ irq_vecs[vec].arg = arg;
-#if defined(CONFIG_440) || defined(CONFIG_405EX)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- if ((vec > 31) && (vec < 64))
- mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i));
- else if (vec > 63)
- mtdcr (uic2er, mfdcr (uic2er) | (0x80000000 >> i));
- else
-#endif /* CONFIG_440GX */
- if (vec > 31)
- mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i));
- else
+ i = vec & 0x1f;
+ if ((vec >= 0) && (vec < 32))
+ mtdcr(uicer, mfdcr(uicer) | (0x80000000 >> i));
+#if (UIC_MAX > 1)
+ else if ((vec >= 32) && (vec < 64))
+ mtdcr(uic1er, mfdcr(uic1er) | (0x80000000 >> i));
#endif
- mtdcr (uicer, mfdcr (uicer) | (0x80000000 >> i));
-#if 0
- printf ("Install interrupt for vector %d ==> %p\n", vec, handler);
+#if (UIC_MAX > 2)
+ else if ((vec >= 64) && (vec < 96))
+ mtdcr(uic2er, mfdcr(uic2er) | (0x80000000 >> i));
#endif
+#if (UIC_MAX > 3)
+ else if (vec >= 96)
+ mtdcr(uic3er, mfdcr(uic3er) | (0x80000000 >> i));
+#endif
+
+ debug("Install interrupt for vector %d ==> %p\n", vec, handler);
}
void irq_free_handler (int vec)
{
- struct irq_action *irqa = irq_vecs;
- int i = vec;
+ int i;
-#if defined(CONFIG_440) || defined(CONFIG_405EX)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- if ((vec > 31) && (vec < 64)) {
- irqa = irq_vecs1;
- i = vec - 32;
- } else if (vec > 63) {
- irqa = irq_vecs2;
- i = vec - 64;
- }
-#endif /* CONFIG_440GX */
- if (vec > 31) {
- irqa = irq_vecs1;
- i = vec - 32;
- }
+ debug("Free interrupt for vector %d ==> %p\n",
+ vec, irq_vecs[vec].handler);
+
+ i = vec & 0x1f;
+ if ((vec >= 0) && (vec < 32))
+ mtdcr(uicer, mfdcr(uicer) & ~(0x80000000 >> i));
+#if (UIC_MAX > 1)
+ else if ((vec >= 32) && (vec < 64))
+ mtdcr(uic1er, mfdcr(uic1er) & ~(0x80000000 >> i));
+#endif
+#if (UIC_MAX > 2)
+ else if ((vec >= 64) && (vec < 96))
+ mtdcr(uic2er, mfdcr(uic2er) & ~(0x80000000 >> i));
+#endif
+#if (UIC_MAX > 3)
+ else if (vec >= 96)
+ mtdcr(uic3er, mfdcr(uic3er) & ~(0x80000000 >> i));
#endif
-#if 0
- printf ("Free interrupt for vector %d ==> %p\n",
- vec, irq_vecs[vec].handler);
-#endif
-
-#if defined(CONFIG_440) || defined(CONFIG_405EX)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- if ((vec > 31) && (vec < 64))
- mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i));
- else if (vec > 63)
- mtdcr (uic2er, mfdcr (uic2er) & ~(0x80000000 >> i));
- else
-#endif /* CONFIG_440GX */
- if (vec > 31)
- mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i));
- else
-#endif
- mtdcr (uicer, mfdcr (uicer) & ~(0x80000000 >> i));
-
- irqa[i].handler = NULL;
- irqa[i].arg = NULL;
+ irq_vecs[vec].handler = NULL;
+ irq_vecs[vec].arg = NULL;
}
-/****************************************************************************/
-
void timer_interrupt_cpu (struct pt_regs *regs)
{
/* nothing to do here */
return;
}
-/****************************************************************************/
-
#if defined(CONFIG_CMD_IRQ)
-
-/*******************************************************************************
- *
- * irqinfo - print information about PCI devices
- *
- */
-int
-do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int vec;
- printf ("\nInterrupt-Information:\n");
-#if defined(CONFIG_440) || defined(CONFIG_405EX)
- printf ("\nUIC 0\n");
-#endif
+ printf ("Interrupt-Information:\n");
printf ("Nr Routine Arg Count\n");
- for (vec=0; vec<32; vec++) {
+ for (vec = 0; vec < (UIC_MAX * 32); vec++) {
if (irq_vecs[vec].handler != NULL) {
printf ("%02d %08lx %08lx %d\n",
vec,
@@ -656,46 +389,6 @@
}
}
-#if defined(CONFIG_440) || defined(CONFIG_405EX)
- printf ("\nUIC 1\n");
- printf ("Nr Routine Arg Count\n");
-
- for (vec=0; vec<32; vec++) {
- if (irq_vecs1[vec].handler != NULL)
- printf ("%02d %08lx %08lx %d\n",
- vec+31, (ulong)irq_vecs1[vec].handler,
- (ulong)irq_vecs1[vec].arg, irq_vecs1[vec].count);
- }
- printf("\n");
-#endif
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- printf ("\nUIC 2\n");
- printf ("Nr Routine Arg Count\n");
-
- for (vec=0; vec<32; vec++) {
- if (irq_vecs2[vec].handler != NULL)
- printf ("%02d %08lx %08lx %d\n",
- vec+63, (ulong)irq_vecs2[vec].handler,
- (ulong)irq_vecs2[vec].arg, irq_vecs2[vec].count);
- }
- printf("\n");
-#endif
-
-#if defined(CONFIG_440SPE)
- printf ("\nUIC 3\n");
- printf ("Nr Routine Arg Count\n");
-
- for (vec=0; vec<32; vec++) {
- if (irq_vecs3[vec].handler != NULL)
- printf ("%02d %08lx %08lx %d\n",
- vec+63, (ulong)irq_vecs3[vec].handler,
- (ulong)irq_vecs3[vec].arg, irq_vecs3[vec].count);
- }
- printf("\n");
-#endif
-
return 0;
}
#endif
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index 3978773..c882720 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -29,6 +29,11 @@
|
+-----------------------------------------------------------------------------*/
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
#include <common.h>
#include <asm/processor.h>
#include <asm/io.h>
@@ -38,7 +43,10 @@
#include <405_mal.h>
#include <miiphy.h>
-#undef ET_DEBUG
+#if !defined(CONFIG_PHY_CLK_FREQ)
+#define CONFIG_PHY_CLK_FREQ 0
+#endif
+
/***********************************************************/
/* Dump out to the screen PHY regs */
/***********************************************************/
@@ -164,9 +172,21 @@
/***********************************************************/
/* read a phy reg and return the value with a rc */
/***********************************************************/
+/* AMCC_TODO:
+ * Find out of the choice for the emac for MDIO is from the bridges,
+ * i.e. ZMII or RGMII as approporiate. If the bridges are not used
+ * to determine the emac for MDIO, then is the SDR0_ETH_CFG[MDIO_SEL]
+ * used? If so, then this routine below does not apply to the 460EX/GT.
+ *
+ * sr: Currently on 460EX only EMAC0 works with MDIO, so we always
+ * return EMAC0 offset here
+ */
unsigned int miiphy_getemac_offset (void)
{
-#if (defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)) && defined(CONFIG_NET_MULTI)
+#if (defined(CONFIG_440) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_460EX) && !defined(CONFIG_460GT)) && \
+ defined(CONFIG_NET_MULTI)
unsigned long zmii;
unsigned long eoffset;
@@ -217,81 +237,90 @@
#endif
}
-int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
- unsigned short *value)
+static int emac_miiphy_wait(u32 emac_reg)
{
- unsigned long sta_reg; /* STA scratch area */
- unsigned long i;
- unsigned long emac_reg;
+ u32 sta_reg;
+ int i;
- emac_reg = miiphy_getemac_offset ();
- /* see if it is ready for 1000 nsec */
+ /* wait for completion */
i = 0;
-
- /* see if it is ready for sec */
- while ((in_be32((void *)EMAC_STACR + emac_reg) & EMAC_STACR_OC) ==
- EMAC_STACR_OC_MASK) {
- udelay (7);
- if (i > 5) {
-#ifdef ET_DEBUG
- sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
- printf ("read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
- printf ("read err 1\n");
-#endif
+ do {
+ sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
+ if (i++ > 5) {
+ debug("%s [%d]: Timeout! EMAC_STACR=0x%0x\n", __func__,
+ __LINE__, sta_reg);
return -1;
}
- i++;
- }
+ udelay(10);
+ } while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK);
+
+ return 0;
+}
+
+static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
+{
+ u32 emac_reg;
+ u32 sta_reg;
+
+ emac_reg = miiphy_getemac_offset();
+
+ /* wait for completion */
+ if (emac_miiphy_wait(emac_reg) != 0)
+ return -1;
+
sta_reg = reg; /* reg address */
+
/* set clock (50Mhz) and read flags */
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
- sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_READ;
+ sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | cmd;
#else
- sta_reg |= EMAC_STACR_READ;
+ sta_reg |= cmd;
#endif
#else
- sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ;
+ sta_reg = (sta_reg | cmd) & ~EMAC_STACR_CLK_100MHZ;
#endif
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
- !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
- !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
- !defined(CONFIG_405EX)
+ /* Some boards (mainly 405EP based) define the PHY clock freqency fixed */
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
-#endif
- sta_reg = sta_reg | (addr << 5); /* Phy address */
+ sta_reg = sta_reg | ((u32)addr << 5); /* Phy address */
sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */
+ if (cmd == EMAC_STACR_WRITE)
+ memcpy(&sta_reg, &value, 2); /* put in data */
+
out_be32((void *)EMAC_STACR + emac_reg, sta_reg);
-#ifdef ET_DEBUG
- printf ("a2: write: EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
-#endif
+ debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
- sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
-#ifdef ET_DEBUG
- printf ("a21: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
-#endif
- i = 0;
- while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
- udelay (7);
- if (i > 5)
- return -1;
+ /* wait for completion */
+ if (emac_miiphy_wait(emac_reg) != 0)
+ return -1;
- i++;
- sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
-#ifdef ET_DEBUG
- printf ("a22: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
-#endif
- }
+ debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
if ((sta_reg & EMAC_STACR_PHYE) != 0)
return -1;
- *value = *(short *)(&sta_reg);
return 0;
+}
-} /* phy_read */
+int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
+ unsigned short *value)
+{
+ unsigned long sta_reg;
+ unsigned long emac_reg;
+
+ emac_reg = miiphy_getemac_offset ();
+
+ if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0)
+ return -1;
+
+ sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
+ *value = *(u16 *)(&sta_reg);
+
+ return 0;
+}
/***********************************************************/
/* write a phy reg and return the value with a rc */
@@ -300,70 +329,5 @@
int emac4xx_miiphy_write (char *devname, unsigned char addr, unsigned char reg,
unsigned short value)
{
- unsigned long sta_reg; /* STA scratch area */
- unsigned long i;
- unsigned long emac_reg;
-
- emac_reg = miiphy_getemac_offset ();
- /* see if it is ready for 1000 nsec */
- i = 0;
-
- while ((in_be32((void *)EMAC_STACR + emac_reg) & EMAC_STACR_OC) ==
- EMAC_STACR_OC_MASK) {
- if (i > 5)
- return -1;
-
- udelay (7);
- i++;
- }
- sta_reg = 0;
- sta_reg = reg; /* reg address */
- /* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
-#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
- sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_WRITE;
-#else
- sta_reg |= EMAC_STACR_WRITE;
-#endif
-#else
- sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ;
-#endif
-
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
- !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
- !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
- !defined(CONFIG_405EX)
- sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */
-#endif
- sta_reg = sta_reg | ((unsigned long)addr << 5); /* Phy address */
- sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */
- memcpy (&sta_reg, &value, 2); /* put in data */
-
- out_be32((void *)EMAC_STACR + emac_reg, sta_reg);
-
- /* wait for completion */
- i = 0;
- sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
-#ifdef ET_DEBUG
- printf ("a31: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
-#endif
- while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
- udelay (7);
- if (i > 5)
- return -1;
-
- i++;
- sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
-#ifdef ET_DEBUG
- printf ("a32: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
-#endif
- }
-
- if ((sta_reg & EMAC_STACR_PHYE) != 0)
- return -1;
-
- return 0;
-
-} /* phy_write */
+ return emac_miiphy_command(addr, reg, EMAC_STACR_WRITE, value);
+}
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
index 9e2229d..5b2ae88 100644
--- a/cpu/ppc4xx/ndfc.c
+++ b/cpu/ppc4xx/ndfc.c
@@ -34,7 +34,8 @@
#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
(defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EZ) || defined(CONFIG_405EX))
+ defined(CONFIG_405EZ) || defined(CONFIG_405EX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT))
#include <nand.h>
#include <linux/mtd/ndfc.h>
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 9006614..fa79952 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2007
+ * (C) Copyright 2000-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -35,6 +35,8 @@
#define DEBUGF(fmt,args...)
#endif
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
@@ -201,7 +203,126 @@
#elif defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+static u8 pll_fwdv_multi_bits[] = {
+ /* values for: 1 - 16 */
+ 0x00, 0x01, 0x0f, 0x04, 0x09, 0x0a, 0x0d, 0x0e, 0x03, 0x0c,
+ 0x05, 0x08, 0x07, 0x02, 0x0b, 0x06
+};
+
+u32 get_cpr0_fwdv(unsigned long cpr_reg_fwdv)
+{
+ u32 index;
+
+ for (index = 0; index < ARRAY_SIZE(pll_fwdv_multi_bits); index++)
+ if (cpr_reg_fwdv == (u32)pll_fwdv_multi_bits[index])
+ return index + 1;
+
+ return 0;
+}
+
+static u8 pll_fbdv_multi_bits[] = {
+ /* values for: 1 - 100 */
+ 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
+ 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
+ 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
+ 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
+ 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
+ 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
+ 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
+ 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
+ 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
+ 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
+ /* values for: 101 - 200 */
+ 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
+ 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
+ 0x20, 0xc0, 0x01, 0x83, 0x77, 0xff, 0x1f, 0xbf, 0x7f, 0xfe,
+ 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
+ 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
+ 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
+ 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
+ 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
+ 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
+ 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
+ /* values for: 201 - 255 */
+ 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
+ 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
+ 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
+ 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
+ 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
+ 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */
+};
+
+u32 get_cpr0_fbdv(unsigned long cpr_reg_fbdv)
+{
+ u32 index;
+
+ for (index = 0; index < ARRAY_SIZE(pll_fbdv_multi_bits); index++)
+ if (cpr_reg_fbdv == (u32)pll_fbdv_multi_bits[index])
+ return index + 1;
+
+ return 0;
+}
+
+/*
+ * AMCC_TODO: verify this routine against latest EAS, cause stuff changed
+ * with latest EAS
+ */
+void get_sys_info (sys_info_t * sysInfo)
+{
+ unsigned long strp0;
+ unsigned long strp1;
+ unsigned long temp;
+ unsigned long m;
+ unsigned long plbedv0;
+
+ /* Extract configured divisors */
+ mfsdr(sdr_sdstp0, strp0);
+ mfsdr(sdr_sdstp1, strp1);
+
+ temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 4);
+ sysInfo->pllFwdDivA = get_cpr0_fwdv(temp);
+
+ temp = (strp0 & PLLSYS0_FWD_DIV_B_MASK);
+ sysInfo->pllFwdDivB = get_cpr0_fwdv(temp);
+
+ temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 8;
+ sysInfo->pllFbkDiv = get_cpr0_fbdv(temp);
+
+ temp = (strp1 & PLLSYS0_OPB_DIV_MASK) >> 26;
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+
+ /* AMCC_TODO: verify the SDR0_SDSTP1.PERDV0 value sysInfo->pllExtBusDiv */
+ temp = (strp1 & PLLSYS0_PERCLK_DIV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 4;
+
+ temp = (strp1 & PLLSYS0_PLBEDV0_DIV_MASK) >> 29;
+ plbedv0 = temp ? temp: 8;
+
+ /* Calculate 'M' based on feedback source */
+ temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
+ if (temp == 0) {
+ /* PLL internal feedback */
+ m = sysInfo->pllFbkDiv;
+ } else {
+ /* PLL PerClk feedback */
+ m = sysInfo->pllFwdDivA * plbedv0 * sysInfo->pllOpbDiv *
+ sysInfo->pllExtBusDiv;
+ }
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz / sysInfo->pllFwdDivA / plbedv0;
+ sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
+ sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
+ sysInfo->freqDDR = sysInfo->freqPLB;
+ sysInfo->freqUART = sysInfo->freqPLB;
+
+ return;
+}
+
+#elif defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
void get_sys_info (sys_info_t *sysInfo)
{
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index d8df67b..8d2777d 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -403,7 +403,8 @@
2:
#if defined(CONFIG_NAND_SPL)
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
/*
* Enable internal SRAM (only on 440EPx/GRx, 440EP/GR have no OCM)
*/
@@ -415,6 +416,11 @@
mfdcr r1,isram0_pmeg
and r1,r1,r2 /* Disable pwr mgmt */
mtdcr isram0_pmeg,r1
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ lis r1,0x4000 /* BAS = 8000_0000 */
+ ori r1,r1,0x4580 /* 16k */
+ mtdcr isram0_sb0cr,r1
+#endif
#endif
#if defined(CONFIG_440EP)
/*
@@ -672,7 +678,9 @@
/* 440EP & 440GR are only 440er PPC's without internal SRAM */
#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
/* not all PPC's have internal SRAM usable as L2-cache */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */
#endif
@@ -711,6 +719,10 @@
lis r1, 0x0003
ori r1,r1, 0x0984 /* fourth 64k */
mtdcr isram0_sb3cr,r1
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ lis r1,0x4000 /* BAS = 8000_0000 */
+ ori r1,r1,0x4580 /* 16k */
+ mtdcr isram0_sb0cr,r1
#elif defined(CONFIG_440GP)
ori r1,r1,0x0380 /* 8k rw */
mtdcr isram0_sb0cr,r1
@@ -1370,7 +1382,8 @@
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
/*
* On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
* to speed up the boot process. Now this cache needs to be disabled.
diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c
index ed493f1..2bfcba1 100644
--- a/cpu/ppc4xx/tlb.c
+++ b/cpu/ppc4xx/tlb.c
@@ -31,9 +31,9 @@
#include <asm/mmu.h>
typedef struct region {
- unsigned long base;
- unsigned long size;
- unsigned long tlb_word2_i_value;
+ u64 base;
+ u32 size;
+ u32 tlb_word2_i_value;
} region_t;
void remove_tlb(u32 vaddr, u32 size)
@@ -182,10 +182,10 @@
asm("isync");
}
-static int add_tlb_entry(unsigned long phys_addr,
- unsigned long virt_addr,
- unsigned long tlb_word0_size_value,
- unsigned long tlb_word2_i_value)
+static int add_tlb_entry(u64 phys_addr,
+ u32 virt_addr,
+ u32 tlb_word0_size_value,
+ u32 tlb_word2_i_value)
{
int i;
unsigned long tlb_word0_value;
@@ -204,7 +204,8 @@
/* Second, create the TLB entry */
tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE |
TLB_WORD0_TS_0 | tlb_word0_size_value;
- tlb_word1_value = TLB_WORD1_RPN_ENCODE(phys_addr) | TLB_WORD1_ERPN_ENCODE(0);
+ tlb_word1_value = TLB_WORD1_RPN_ENCODE((u32)phys_addr) |
+ TLB_WORD1_ERPN_ENCODE(phys_addr >> 32);
tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
TLB_WORD2_W_DISABLE | tlb_word2_i_value |
@@ -228,10 +229,10 @@
return 0;
}
-static void program_tlb_addr(unsigned long phys_addr,
- unsigned long virt_addr,
- unsigned long mem_size,
- unsigned long tlb_word2_i_value)
+static void program_tlb_addr(u64 phys_addr,
+ u32 virt_addr,
+ u32 mem_size,
+ u32 tlb_word2_i_value)
{
int rc;
int tlb_i;
@@ -331,7 +332,7 @@
* Common usage for boards with SDRAM DIMM modules to dynamically
* configure the TLB's for the SDRAM
*/
-void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value)
+void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value)
{
region_t region_array;
diff --git a/cpu/s3c44b0/cpu.c b/cpu/s3c44b0/cpu.c
index 5d50b3c..eae6adb 100644
--- a/cpu/s3c44b0/cpu.c
+++ b/cpu/s3c44b0/cpu.c
@@ -155,7 +155,7 @@
#define HEX2BCD(x) ((((x) / 10) << 4) + (x) % 10)
#endif
-void rtc_get (struct rtc_time* tm)
+int rtc_get (struct rtc_time* tm)
{
RTCCON |= 1;
tm->tm_year = BCD2HEX(BCDYEAR);
@@ -184,6 +184,8 @@
tm->tm_year += 1900;
else
tm->tm_year += 2000;
+
+ return 0;
}
void rtc_set (struct rtc_time* tm)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 439c950..f04c72d 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -1180,6 +1180,27 @@
}
/*-----------------------------------------------------------------------
+ * This is used in a few places in write_buf() to show programming
+ * progress. Making it a function is nasty because it needs to do side
+ * effect updates to digit and dots. Repeated code is nasty too, so
+ * we define it once here.
+ */
+#ifdef CONFIG_FLASH_SHOW_PROGRESS
+#define FLASH_SHOW_PROGRESS(scale, dots, digit, dots_sub) \
+ dots -= dots_sub; \
+ if ((scale > 0) && (dots <= 0)) { \
+ if ((digit % 5) == 0) \
+ printf ("%d", digit / 5); \
+ else \
+ putc ('.'); \
+ digit--; \
+ dots += scale; \
+ }
+#else
+#define FLASH_SHOW_PROGRESS(scale, dots, digit, dots_sub)
+#endif
+
+/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
@@ -1192,10 +1213,23 @@
int aln;
cfiword_t cword;
int i, rc;
-
#ifdef CFG_FLASH_USE_BUFFER_WRITE
int buffered_size;
#endif
+#ifdef CONFIG_FLASH_SHOW_PROGRESS
+ int digit = CONFIG_FLASH_SHOW_PROGRESS;
+ int scale = 0;
+ int dots = 0;
+
+ /*
+ * Suppress if there are fewer than CONFIG_FLASH_SHOW_PROGRESS writes.
+ */
+ if (cnt >= CONFIG_FLASH_SHOW_PROGRESS) {
+ scale = (int)((cnt + CONFIG_FLASH_SHOW_PROGRESS - 1) /
+ CONFIG_FLASH_SHOW_PROGRESS);
+ }
+#endif
+
/* get lower aligned address */
wp = (addr & ~(info->portwidth - 1));
@@ -1219,6 +1253,7 @@
return rc;
wp += i;
+ FLASH_SHOW_PROGRESS(scale, dots, digit, i);
}
/* handle the aligned part */
@@ -1248,6 +1283,7 @@
wp += i;
src += i;
cnt -= i;
+ FLASH_SHOW_PROGRESS(scale, dots, digit, i);
}
#else
while (cnt >= info->portwidth) {
@@ -1259,8 +1295,10 @@
return rc;
wp += info->portwidth;
cnt -= info->portwidth;
+ FLASH_SHOW_PROGRESS(scale, dots, digit, info->portwidth);
}
#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+
if (cnt == 0) {
return (0);
}
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index d4003a2..3b828fb 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1180,6 +1180,12 @@
if (maf_id != bram_maf_id || dev_id != bram_dev_id)
return -ENXIO;
+ /* FIXME : Current OneNAND MTD doesn't support Flex-OneNAND */
+ if (dev_id & (1 << 9)) {
+ printk("Not yet support Flex-OneNAND\n");
+ return -ENXIO;
+ }
+
/* Flash device information */
onenand_print_device_info(dev_id, 0);
this->device_id = dev_id;
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index b9723fa..320dc3e 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -27,6 +27,7 @@
COBJS-y += 3c589.o
COBJS-y += bcm570x.o bcm570x_autoneg.o 5701rls.o
+COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o
COBJS-y += cs8900.o
COBJS-y += dc2114x.o
COBJS-y += dm9000x.o
@@ -40,7 +41,7 @@
COBJS-y += macb.o
COBJS-y += mcffec.o
COBJS-y += natsemi.o
-COBJS-y += ne2000.o
+COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o
COBJS-y += netarm_eth.o
COBJS-y += netconsole.o
COBJS-y += ns7520_eth.o
@@ -57,6 +58,7 @@
COBJS-y += tsec.o
COBJS-y += tsi108_eth.o
COBJS-y += uli526x.o
+COBJS-y += vsc7385.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/net/ax88796.h b/drivers/net/ax88796.h
new file mode 100644
index 0000000..069ae80
--- /dev/null
+++ b/drivers/net/ax88796.h
@@ -0,0 +1,217 @@
+/*
+ * AX88796L(NE2000) support
+ *
+ * (c) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __DRIVERS_AX88796L_H__
+#define __DRIVERS_AX88796L_H__
+
+#define DP_DATA (0x10 << 1)
+#define START_PG 0x40 /* First page of TX buffer */
+#define START_PG2 0x48
+#define STOP_PG 0x80 /* Last page +1 of RX ring */
+#define TX_PAGES 12
+#define RX_START (START_PG+TX_PAGES)
+#define RX_END STOP_PG
+
+#define AX88796L_BASE_ADDRESS CONFIG_DRIVER_NE2000_BASE
+#define AX88796L_BYTE_ACCESS 0x00001000
+#define AX88796L_OFFSET 0x00000400
+#define AX88796L_ADDRESS_BYTE AX88796L_BASE_ADDRESS + \
+ AX88796L_BYTE_ACCESS + AX88796L_OFFSET
+#define AX88796L_REG_MEMR AX88796L_ADDRESS_BYTE + (0x14<<1)
+#define AX88796L_REG_CR AX88796L_ADDRESS_BYTE + (0x00<<1)
+
+#define AX88796L_CR (*(vu_short *)(AX88796L_REG_CR))
+#define AX88796L_MEMR (*(vu_short *)(AX88796L_REG_MEMR))
+
+#define EECS_HIGH (AX88796L_MEMR |= 0x10)
+#define EECS_LOW (AX88796L_MEMR &= 0xef)
+#define EECLK_HIGH (AX88796L_MEMR |= 0x80)
+#define EECLK_LOW (AX88796L_MEMR &= 0x7f)
+#define EEDI_HIGH (AX88796L_MEMR |= 0x20)
+#define EEDI_LOW (AX88796L_MEMR &= 0xdf)
+#define EEDO ((AX88796L_MEMR & 0x40)>>6)
+
+#define PAGE0_SET (AX88796L_CR &= 0x3f)
+#define PAGE1_SET (AX88796L_CR = (AX88796L_CR & 0x3f) | 0x40)
+
+#define BIT_DUMMY 0
+#define MAC_EEP_READ 1
+#define MAC_EEP_WRITE 2
+#define MAC_EEP_ERACE 3
+#define MAC_EEP_EWEN 4
+#define MAC_EEP_EWDS 5
+
+/* R7780MP Specific code */
+#if defined(CONFIG_R7780MP)
+#define ISA_OFFSET 0x1400
+#define DP_IN(_b_, _o_, _d_) (_d_) = \
+ *( (vu_short *) ((_b_) + ((_o_) * 2) + ISA_OFFSET))
+#define DP_OUT(_b_, _o_, _d_) \
+ *((vu_short *)((_b_) + ((_o_) * 2) + ISA_OFFSET)) = (_d_)
+#define DP_IN_DATA(_b_, _d_) (_d_) = *( (vu_short *) ((_b_) + ISA_OFFSET))
+#define DP_OUT_DATA(_b_, _d_) *( (vu_short *) ((_b_)+ISA_OFFSET)) = (_d_)
+#else
+/* Please change for your target boards */
+#define ISA_OFFSET 0x0000
+#define DP_IN(_b_, _o_, _d_) (_d_) = *( (vu_short *)((_b_)+(_o_ )+ISA_OFFSET))
+#define DP_OUT(_b_, _o_, _d_) *((vu_short *)((_b_)+(_o_)+ISA_OFFSET)) = (_d_)
+#define DP_IN_DATA(_b_, _d_) (_d_) = *( (vu_short *) ((_b_)+ISA_OFFSET))
+#define DP_OUT_DATA(_b_, _d_) *( (vu_short *) ((_b_)+ISA_OFFSET)) = (_d_)
+#endif
+
+
+/*
+ * Set 1 bit data
+ */
+static void ax88796_bitset(u32 bit)
+{
+ /* DATA1 */
+ if( bit )
+ EEDI_HIGH;
+ else
+ EEDI_LOW;
+
+ EECLK_LOW;
+ udelay(1000);
+ EECLK_HIGH;
+ udelay(1000);
+ EEDI_LOW;
+}
+
+/*
+ * Get 1 bit data
+ */
+static u8 ax88796_bitget(void)
+{
+ u8 bit;
+
+ EECLK_LOW;
+ udelay(1000);
+ /* DATA */
+ bit = EEDO;
+ EECLK_HIGH;
+ udelay(1000);
+
+ return bit;
+}
+
+/*
+ * Send COMMAND to EEPROM
+ */
+static void ax88796_eep_cmd(u8 cmd)
+{
+ ax88796_bitset(BIT_DUMMY);
+ switch(cmd){
+ case MAC_EEP_READ:
+ ax88796_bitset(1);
+ ax88796_bitset(1);
+ ax88796_bitset(0);
+ break;
+
+ case MAC_EEP_WRITE:
+ ax88796_bitset(1);
+ ax88796_bitset(0);
+ ax88796_bitset(1);
+ break;
+
+ case MAC_EEP_ERACE:
+ ax88796_bitset(1);
+ ax88796_bitset(1);
+ ax88796_bitset(1);
+ break;
+
+ case MAC_EEP_EWEN:
+ ax88796_bitset(1);
+ ax88796_bitset(0);
+ ax88796_bitset(0);
+ break;
+
+ case MAC_EEP_EWDS:
+ ax88796_bitset(1);
+ ax88796_bitset(0);
+ ax88796_bitset(0);
+ break;
+ default:
+ break;
+ }
+}
+
+static void ax88796_eep_setaddr(u16 addr)
+{
+ int i ;
+ for( i = 7 ; i >= 0 ; i-- )
+ ax88796_bitset(addr & (1 << i));
+}
+
+/*
+ * Get data from EEPROM
+ */
+static u16 ax88796_eep_getdata(void)
+{
+ ushort data = 0;
+ int i;
+
+ ax88796_bitget(); /* DUMMY */
+ for( i = 0 ; i < 16 ; i++ ){
+ data <<= 1;
+ data |= ax88796_bitget();
+ }
+ return data;
+}
+
+static void ax88796_mac_read(u8 *buff)
+{
+ int i ;
+ u16 data, addr = 0;
+
+ for( i = 0 ; i < 3; i++ )
+ {
+ EECS_HIGH;
+ EEDI_LOW;
+ udelay(1000);
+ /* READ COMMAND */
+ ax88796_eep_cmd(MAC_EEP_READ);
+ /* ADDRESS */
+ ax88796_eep_setaddr(addr++);
+ /* GET DATA */
+ data = ax88796_eep_getdata();
+ *buff++ = (uchar)(data & 0xff);
+ *buff++ = (uchar)((data >> 8) & 0xff);
+ EECLK_LOW;
+ EEDI_LOW;
+ EECS_LOW;
+ }
+}
+
+int get_prom(u8* mac_addr)
+{
+ u8 prom[32];
+ int i;
+
+ ax88796_mac_read(prom);
+ for (i = 0; i < 6; i++){
+ mac_addr[i] = prom[i];
+ }
+ return 1;
+}
+
+#endif /* __DRIVERS_AX88796L_H__ */
diff --git a/board/bf537-stamp/ether_bf537.c b/drivers/net/bfin_mac.c
similarity index 77%
rename from board/bf537-stamp/ether_bf537.c
rename to drivers/net/bfin_mac.c
index 6c514c6..afe122a 100644
--- a/board/bf537-stamp/ether_bf537.c
+++ b/drivers/net/bfin_mac.c
@@ -1,39 +1,24 @@
/*
- * ADI Blackfin 537 MAC Ethernet
+ * Driver for Blackfin On-Chip MAC device
*
- * Copyright (c) 2005 Analog Device, Inc.
+ * Copyright (c) 2005-2008 Analog Device, Inc.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <config.h>
-#include <asm/blackfin.h>
#include <net.h>
#include <command.h>
#include <malloc.h>
-#include "ether_bf537.h"
+#include <asm/blackfin.h>
#include <asm/mach-common/bits/dma.h>
#include <asm/mach-common/bits/emac.h>
#include <asm/mach-common/bits/pll.h>
+#include "bfin_mac.h"
+
#ifdef CONFIG_POST
#include <post.h>
#endif
@@ -41,66 +26,50 @@
#undef DEBUG_ETHERNET
#ifdef DEBUG_ETHERNET
-#define DEBUGF(fmt,args...) printf(fmt,##args)
+#define DEBUGF(fmt, args...) printf(fmt, ##args)
#else
-#define DEBUGF(fmt,args...)
+#define DEBUGF(fmt, args...)
#endif
-#if defined(CONFIG_CMD_NET)
-
#define RXBUF_BASE_ADDR 0xFF900000
#define TXBUF_BASE_ADDR 0xFF800000
#define TX_BUF_CNT 1
-#define TOUT_LOOP 1000000
+#define TOUT_LOOP 1000000
ADI_ETHER_BUFFER *txbuf[TX_BUF_CNT];
ADI_ETHER_BUFFER *rxbuf[PKTBUFSRX];
static u16 txIdx; /* index of the current RX buffer */
static u16 rxIdx; /* index of the current TX buffer */
-u8 SrcAddr[6];
u16 PHYregs[NO_PHY_REGS]; /* u16 PHYADDR; */
/* DMAx_CONFIG values at DMA Restart */
-const ADI_DMA_CONFIG_REG rxdmacfg = { 1, 1, 2, 0, 0, 0, 0, 5, 7 };
+const ADI_DMA_CONFIG_REG rxdmacfg = {
+ .b_DMA_EN = 1, /* enabled */
+ .b_WNR = 1, /* write to memory */
+ .b_WDSIZE = 2, /* wordsize is 32 bits */
+ .b_DMA2D = 0,
+ .b_RESTART = 0,
+ .b_DI_SEL = 0,
+ .b_DI_EN = 0, /* no interrupt */
+ .b_NDSIZE = 5, /* 5 half words is desc size */
+ .b_FLOW = 7 /* large desc flow */
+};
-#if 0
- rxdmacfg.b_DMA_EN = 1; /* enabled */
- rxdmacfg.b_WNR = 1; /* write to memory */
- rxdmacfg.b_WDSIZE = 2; /* wordsize is 32 bits */
- rxdmacfg.b_DMA2D = 0; /* N/A */
- rxdmacfg.b_RESTART= 0; /* N/A */
- rxdmacfg.b_DI_SEL = 0; /* N/A */
- rxdmacfg.b_DI_EN = 0; /* no interrupt */
- rxdmacfg.b_NDSIZE = 5; /* 5 half words is desc size. */
- rxdmacfg.b_FLOW = 7; /* large desc flow */
-#endif
+const ADI_DMA_CONFIG_REG txdmacfg = {
+ .b_DMA_EN = 1, /* enabled */
+ .b_WNR = 0, /* read from memory */
+ .b_WDSIZE = 2, /* wordsize is 32 bits */
+ .b_DMA2D = 0,
+ .b_RESTART = 0,
+ .b_DI_SEL = 0,
+ .b_DI_EN = 0, /* no interrupt */
+ .b_NDSIZE = 5, /* 5 half words is desc size */
+ .b_FLOW = 7 /* large desc flow */
+};
-const ADI_DMA_CONFIG_REG txdmacfg = { 1, 0, 2, 0, 0, 0, 0, 5, 7 };
-
-#if 0
- txdmacfg.b_DMA_EN = 1; /* enabled */
- txdmacfg.b_WNR = 0; /* read from memory */
- txdmacfg.b_WDSIZE = 2; /* wordsize is 32 bits */
- txdmacfg.b_DMA2D = 0; /* N/A */
- txdmacfg.b_RESTART= 0; /* N/A */
- txdmacfg.b_DI_SEL = 0; /* N/A */
- txdmacfg.b_DI_EN = 0; /* no interrupt */
- txdmacfg.b_NDSIZE = 5; /* 5 half words is desc size. */
- txdmacfg.b_FLOW = 7; /* large desc flow */
-#endif
-
-ADI_ETHER_BUFFER *SetupRxBuffer(int no);
-ADI_ETHER_BUFFER *SetupTxBuffer(int no);
-
-static int bfin_EMAC_init(struct eth_device *dev, bd_t * bd);
-static void bfin_EMAC_halt(struct eth_device *dev);
-static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet,
- int length);
-static int bfin_EMAC_recv(struct eth_device *dev);
-
-int bfin_EMAC_initialize(bd_t * bis)
+int bfin_EMAC_initialize(bd_t *bis)
{
struct eth_device *dev;
dev = (struct eth_device *)malloc(sizeof(*dev));
@@ -108,7 +77,7 @@
hang();
memset(dev, 0, sizeof(*dev));
- sprintf(dev->name, "BF537 ETHERNET");
+ sprintf(dev->name, "Blackfin EMAC");
dev->iobase = 0;
dev->priv = 0;
@@ -165,7 +134,7 @@
txIdx = 0;
else
txIdx++;
- out:
+ out:
DEBUGF("BFIN EMAC send: length = %d\n", length);
return result;
}
@@ -212,7 +181,7 @@
*
*************************************************************/
-static int bfin_EMAC_init(struct eth_device *dev, bd_t * bd)
+static int bfin_EMAC_init(struct eth_device *dev, bd_t *bd)
{
u32 opmode;
int dat;
@@ -227,7 +196,7 @@
return -1;
/* Initialize EMAC address */
- SetupMacAddr(SrcAddr);
+ bfin_EMAC_setup_addr(bd);
/* Initialize TX and RX buffer */
for (i = 0; i < PKTBUFSRX; i++) {
@@ -289,37 +258,25 @@
}
-void SetupMacAddr(u8 * MACaddr)
+void bfin_EMAC_setup_addr(bd_t *bd)
{
- char *tmp, *end;
- int i;
- /* this depends on a little-endian machine */
- tmp = getenv("ethaddr");
- if (tmp) {
- for (i = 0; i < 6; i++) {
- MACaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end + 1 : end;
- }
-
-#ifndef CONFIG_NETCONSOLE
- printf("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n",
- MACaddr[0], MACaddr[1],
- MACaddr[2], MACaddr[3], MACaddr[4], MACaddr[5]);
-#endif
- *pEMAC_ADDRLO = MACaddr[0] | MACaddr[1] << 8 |
- MACaddr[2] << 16 | MACaddr[3] << 24;
- *pEMAC_ADDRHI = MACaddr[4] | MACaddr[5] << 8;
- }
+ *pEMAC_ADDRLO =
+ bd->bi_enetaddr[0] |
+ bd->bi_enetaddr[1] << 8 |
+ bd->bi_enetaddr[2] << 16 |
+ bd->bi_enetaddr[3] << 24;
+ *pEMAC_ADDRHI =
+ bd->bi_enetaddr[4] |
+ bd->bi_enetaddr[5] << 8;
}
-void PollMdcDone(void)
+static void PollMdcDone(void)
{
/* poll the STABUSY bit */
while (*pEMAC_STAADD & STABUSY) ;
}
-void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data)
+static void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data)
{
PollMdcDone();
@@ -332,7 +289,7 @@
/*********************************************************************************
* Read an off-chip register in a PHY through the MDC/MDIO port *
*********************************************************************************/
-u16 RdPHYReg(u16 PHYAddr, u16 RegAddr)
+static u16 RdPHYReg(u16 PHYAddr, u16 RegAddr)
{
u16 Data;
@@ -350,7 +307,8 @@
return Data;
}
-void SoftResetPHY(void)
+#if 0 /* dead code ? */
+static void SoftResetPHY(void)
{
u16 phydat;
/* set the reset bit */
@@ -362,13 +320,30 @@
phydat = RdPHYReg(PHYADDR, PHY_MODECTL);
} while ((phydat & PHY_RESET) != 0);
}
+#endif
-int SetupSystemRegs(int *opmode)
+static int SetupSystemRegs(int *opmode)
{
u16 sysctl, phydat;
int count = 0;
/* Enable PHY output */
*pVR_CTL |= CLKBUFOE;
+ /* Set all the pins to peripheral mode */
+
+#ifndef CONFIG_BFIN_MAC_RMII
+ *pPORTH_FER = 0xFFFF;
+#ifdef __ADSPBF52x__
+ *pPORTH_MUX = PORT_x_MUX_0_FUNC_2 | PORT_x_MUX_1_FUNC_2 | PORT_x_MUX_2_FUNC_2;
+#endif
+#else
+#if defined(__ADSPBF536__) || defined(__ADSPBF537__)
+ *pPORTH_FER = 0xC373;
+#endif
+#ifdef __ADSPBF52x__
+ *pPORTH_FER = 0x01FF;
+ *pPORTH_MUX = PORT_x_MUX_0_FUNC_2 | PORT_x_MUX_1_FUNC_2;
+#endif
+#endif
/* MDC = 2.5 MHz */
sysctl = SET_MDCDIV(24);
/* Odd word alignment for Receive Frame DMA word */
@@ -546,4 +521,3 @@
return 0;
}
#endif
-#endif
diff --git a/board/bf537-stamp/ether_bf537.h b/drivers/net/bfin_mac.h
similarity index 69%
rename from board/bf537-stamp/ether_bf537.h
rename to drivers/net/bfin_mac.h
index 22fc392..c8a94d0 100644
--- a/board/bf537-stamp/ether_bf537.h
+++ b/drivers/net/bfin_mac.h
@@ -1,3 +1,14 @@
+/*
+ * bfin_mac.h - some defines/structures for the Blackfin on-chip MAC.
+ *
+ * Copyright (c) 2005-2008 Analog Device, Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MAC_H__
+#define __BFIN_MAC_H__
+
#define PHYADDR 0x01
#define NO_PHY_REGS 0x20
@@ -60,12 +71,19 @@
} ADI_ETHER_BUFFER;
/* 40 bytes/struct in 44 bytes */
-void SetupMacAddr(u8 * MACaddr);
+static ADI_ETHER_BUFFER *SetupRxBuffer(int no);
+static ADI_ETHER_BUFFER *SetupTxBuffer(int no);
-void PollMdcDone(void);
-void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data);
-u16 RdPHYReg(u16 PHYAddr, u16 RegAddr);
-void SoftResetPHY(void);
-void DumpPHYRegs(void);
+static int bfin_EMAC_init(struct eth_device *dev, bd_t *bd);
+static void bfin_EMAC_halt(struct eth_device *dev);
+static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet, int length);
+static int bfin_EMAC_recv(struct eth_device *dev);
-int SetupSystemRegs(int *opmode);
+static void PollMdcDone(void);
+static void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data);
+static u16 RdPHYReg(u16 PHYAddr, u16 RegAddr);
+static int SetupSystemRegs(int *opmode);
+
+static void bfin_EMAC_setup_addr(bd_t *bd);
+
+#endif
diff --git a/drivers/net/ne2000.c b/drivers/net/ne2000.c
index b100657..99baeea 100644
--- a/drivers/net/ne2000.c
+++ b/drivers/net/ne2000.c
@@ -5,7 +5,6 @@
eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
are GPL, so this is, of course, GPL.
-
==========================================================================
dev/if_dp83902a.c
@@ -70,9 +69,7 @@
####DESCRIPTIONEND####
-
==========================================================================
-
*/
#include <common.h>
@@ -80,27 +77,11 @@
#include <net.h>
#include <malloc.h>
-#ifdef CONFIG_DRIVER_NE2000
-
-/* wor around udelay resetting OCR */
-static void my_udelay(long us) {
- long tmo;
-
- tmo = get_timer (0) + us * CFG_HZ / 1000000; /* will this be much greater than 0 ? */
- while (get_timer (0) < tmo);
-}
-
-#define mdelay(n) my_udelay((n)*1000)
-
+#define mdelay(n) udelay((n)*1000)
/* forward definition of function used for the uboot interface */
void uboot_push_packet_len(int len);
void uboot_push_tx_done(int key, int val);
-/* timeout for tx/rx in s */
-#define TOUT 5
-
-#define ETHER_ADDR_LEN 6
-
/*
------------------------------------------------------------------------
Debugging details
@@ -118,17 +99,22 @@
#if DEBUG & 1
#define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0)
#define DEBUG_LINE() do { printf("%d\n", __LINE__); } while (0)
+#define PRINTK(args...) printf(args)
#else
#define DEBUG_FUNCTION() do {} while(0)
#define DEBUG_LINE() do {} while(0)
+#define PRINTK(args...)
#endif
-#include "ne2000.h"
+/* NE2000 base header file */
+#include "ne2000_base.h"
-#if DEBUG & 1
-#define PRINTK(args...) printf(args)
+#if defined(CONFIG_DRIVER_AX88796L)
+/* AX88796L support */
+#include "ax88796.h"
#else
-#define PRINTK(args...)
+/* Basic NE2000 chip support */
+#include "ne2000.h"
#endif
static dp83902a_priv_data_t nic; /* just one instance of the card supported */
@@ -137,8 +123,7 @@
dp83902a_init(void)
{
dp83902a_priv_data_t *dp = &nic;
- cyg_uint8* base;
- int i;
+ u8* base;
DEBUG_FUNCTION();
@@ -147,6 +132,8 @@
DEBUG_LINE();
+#if defined(NE2000_BASIC_INIT)
+ /* AX88796L doesn't need */
/* Prepare ESA */
DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1); /* Select page 1 */
/* Use the address from the serial EEPROM */
@@ -163,6 +150,7 @@
dp->esa[4],
dp->esa[5] );
+#endif /* NE2000_BASIC_INIT */
return true;
}
@@ -170,7 +158,7 @@
dp83902a_stop(void)
{
dp83902a_priv_data_t *dp = &nic;
- cyg_uint8 *base = dp->base;
+ u8 *base = dp->base;
DEBUG_FUNCTION();
@@ -188,10 +176,10 @@
the hardware ready to send/receive packets.
*/
static void
-dp83902a_start(unsigned char * enaddr)
+dp83902a_start(u8 * enaddr)
{
dp83902a_priv_data_t *dp = &nic;
- cyg_uint8 *base = dp->base;
+ u8 *base = dp->base;
int i;
DEBUG_FUNCTION();
@@ -206,15 +194,21 @@
dp->tx1 = dp->tx2 = 0;
dp->tx_next = dp->tx_buf1;
dp->tx_started = false;
+ dp->running = true;
DP_OUT(base, DP_PSTART, dp->rx_buf_start); /* Receive ring start page */
DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1); /* Receive ring boundary */
DP_OUT(base, DP_PSTOP, dp->rx_buf_end); /* Receive ring end page */
dp->rx_next = dp->rx_buf_start-1;
+ dp->running = true;
DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */
DP_OUT(base, DP_IMR, DP_IMR_All); /* Enable all interrupts */
DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP); /* Select page 1 */
DP_OUT(base, DP_P1_CURP, dp->rx_buf_start); /* Current page - next free page for Rx */
+ dp->running = true;
for (i = 0; i < ETHER_ADDR_LEN; i++) {
+ /* FIXME */
+ /*((vu_short*)( base + ((DP_P1_PAR0 + i) * 2) +
+ * 0x1400)) = enaddr[i];*/
DP_OUT(base, DP_P1_PAR0+i, enaddr[i]);
}
/* Enable and start device */
@@ -234,7 +228,7 @@
dp83902a_start_xmit(int start_page, int len)
{
dp83902a_priv_data_t *dp = (dp83902a_priv_data_t *) &nic;
- cyg_uint8 *base = dp->base;
+ u8 *base = dp->base;
DEBUG_FUNCTION();
@@ -259,10 +253,10 @@
that there is free buffer space (dp->tx_next).
*/
static void
-dp83902a_send(unsigned char *data, int total_len, unsigned long key)
+dp83902a_send(u8 *data, int total_len, u32 key)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
- cyg_uint8 *base = dp->base;
+ u8 *base = dp->base;
int len, start_page, pkt_len, i, isr;
#if DEBUG & 4
int dx;
@@ -296,7 +290,7 @@
/* but the code is extended a bit to do what Hitachi's monitor */
/* does (i.e., also read data). */
- cyg_uint16 tmp;
+ u16 tmp;
int len = 1;
DP_OUT(base, DP_RSAL, 0x100-len);
@@ -322,7 +316,7 @@
/* Put data into buffer */
#if DEBUG & 4
- printf(" sg buf %08lx len %08x\n ", (unsigned long) data, len);
+ printf(" sg buf %08lx len %08x\n ", (u32)data, len);
dx = 0;
#endif
while (len > 0) {
@@ -330,6 +324,7 @@
printf(" %02x", *data);
if (0 == (++dx % 16)) printf("\n ");
#endif
+
DP_OUT_DATA(dp->data, *data++);
len--;
}
@@ -358,6 +353,7 @@
do {
DP_IN(base, DP_ISR, isr);
} while ((isr & DP_ISR_RDC) == 0);
+
/* Then disable DMA */
DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
@@ -383,9 +379,9 @@
dp83902a_RxEvent(void)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
- cyg_uint8 *base = dp->base;
- unsigned char rsr;
- unsigned char rcv_hdr[4];
+ u8 *base = dp->base;
+ u8 rsr;
+ u8 rcv_hdr[4];
int i, len, pkt, cur;
DEBUG_FUNCTION();
@@ -423,6 +419,7 @@
CYGACC_CALL_IF_DELAY_US(10);
#endif
+ /* read header (get data size)*/
for (i = 0; i < sizeof(rcv_hdr);) {
DP_IN_DATA(dp->data, rcv_hdr[i++]);
}
@@ -432,7 +429,10 @@
rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]);
#endif
len = ((rcv_hdr[3] << 8) | rcv_hdr[2]) - sizeof(rcv_hdr);
+
+ /* data read */
uboot_push_packet_len(len);
+
if (rcv_hdr[1] == dp->rx_buf_start)
DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1);
else
@@ -448,12 +448,12 @@
efficient processing in the upper layers of the stack.
*/
static void
-dp83902a_recv(unsigned char *data, int len)
+dp83902a_recv(u8 *data, int len)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
- cyg_uint8 *base = dp->base;
+ u8 *base = dp->base;
int i, mlen;
- cyg_uint8 saved_char = 0;
+ u8 saved_char = 0;
bool saved;
#if DEBUG & 4
int dx;
@@ -482,7 +482,7 @@
if (data) {
mlen = len;
#if DEBUG & 4
- printf(" sg buf %08lx len %08x \n", (unsigned long) data, mlen);
+ printf(" sg buf %08lx len %08x \n", (u32) data, mlen);
dx = 0;
#endif
while (0 < mlen) {
@@ -495,7 +495,7 @@
}
{
- cyg_uint8 tmp;
+ u8 tmp;
DP_IN_DATA(dp->data, tmp);
#if DEBUG & 4
printf(" %02x", tmp);
@@ -516,9 +516,9 @@
dp83902a_TxEvent(void)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
- cyg_uint8 *base = dp->base;
- unsigned char tsr;
- unsigned long key;
+ u8 *base = dp->base;
+ u8 tsr;
+ u32 key;
DEBUG_FUNCTION();
@@ -551,8 +551,8 @@
dp83902a_ClearCounters(void)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
- cyg_uint8 *base = dp->base;
- cyg_uint8 cnt1, cnt2, cnt3;
+ u8 *base = dp->base;
+ u8 cnt1, cnt2, cnt3;
DP_IN(base, DP_FER, cnt1);
DP_IN(base, DP_CER, cnt2);
@@ -566,8 +566,8 @@
dp83902a_Overflow(void)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *)&nic;
- cyg_uint8 *base = dp->base;
- cyg_uint8 isr;
+ u8 *base = dp->base;
+ u8 isr;
/* Issue a stop command and wait 1.6ms for it to complete. */
DP_OUT(base, DP_CR, DP_CR_STOP | DP_CR_NODMA);
@@ -603,8 +603,8 @@
dp83902a_poll(void)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
- cyg_uint8 *base = dp->base;
- unsigned char isr;
+ u8 *base = dp->base;
+ u8 isr;
DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0 | DP_CR_START);
DP_IN(base, DP_ISR, isr);
@@ -642,13 +642,13 @@
/* find prom (taken from pc_net_cs.c from Linux) */
#include "8390.h"
-
+/*
typedef struct hw_info_t {
u_int offset;
u_char a0, a1, a2;
u_int flags;
} hw_info_t;
-
+*/
#define DELAY_OUTPUT 0x01
#define HAS_MISC_REG 0x02
#define USE_BIG_BUF 0x04
@@ -731,102 +731,17 @@
static hw_info_t default_info = { 0, 0, 0, 0, 0 };
-unsigned char dev_addr[6];
+u8 dev_addr[6];
#define PCNET_CMD 0x00
#define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */
#define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */
#define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */
-unsigned long nic_base;
-
-static void pcnet_reset_8390(void)
-{
- int i, r;
-
- PRINTK("nic base is %lx\n", nic_base);
-
- n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
- PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
- n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
- PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
- n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
- PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
- n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-
- n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
-
- for (i = 0; i < 100; i++) {
- if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
- break;
- PRINTK("got %x in reset\n", r);
- my_udelay(100);
- }
- n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */
-
- if (i == 100)
- printf("pcnet_reset_8390() did not complete.\n");
-} /* pcnet_reset_8390 */
-
-static hw_info_t * get_prom(void ) {
- unsigned char prom[32];
- int i, j;
- struct {
- u_char value, offset;
- } program_seq[] = {
- {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
- {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
- {0x00, EN0_RCNTLO}, /* Clear the count regs. */
- {0x00, EN0_RCNTHI},
- {0x00, EN0_IMR}, /* Mask completion irq. */
- {0xFF, EN0_ISR},
- {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
- {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
- {32, EN0_RCNTLO},
- {0x00, EN0_RCNTHI},
- {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
- {0x00, EN0_RSARHI},
- {E8390_RREAD+E8390_START, E8390_CMD},
- };
-
- PRINTK("trying to get MAC via prom reading\n");
-
- pcnet_reset_8390();
-
- mdelay(10);
-
- for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)
- n2k_outb(program_seq[i].value, program_seq[i].offset);
-
- PRINTK("PROM:");
- for (i = 0; i < 32; i++) {
- prom[i] = n2k_inb(PCNET_DATAPORT);
- PRINTK(" %02x", prom[i]);
- }
- PRINTK("\n");
- for (i = 0; i < NR_INFO; i++) {
- if ((prom[0] == hw_info[i].a0) &&
- (prom[2] == hw_info[i].a1) &&
- (prom[4] == hw_info[i].a2)) {
- PRINTK("matched board %d\n", i);
- break;
- }
- }
- if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
- for (j = 0; j < 6; j++)
- dev_addr[j] = prom[j<<1];
- PRINTK("on exit i is %d/%ld\n", i, NR_INFO);
- PRINTK("MAC address is %02x:%02x:%02x:%02x:%02x:%02x\n",
- dev_addr[0],dev_addr[1],dev_addr[2],dev_addr[3],dev_addr[4],dev_addr[5]);
- return (i < NR_INFO) ? hw_info+i : &default_info;
- }
- return NULL;
-}
+u32 nic_base;
/* U-boot specific routines */
-
-
-static unsigned char *pbuf = NULL;
+static u8 *pbuf = NULL;
static int pkey = -1;
static int initialized=0;
@@ -839,7 +754,7 @@
}
dp83902a_recv(&pbuf[0], len);
- /* Just pass it to the upper layer */
+ /*Just pass it to the upper layer*/
NetReceive(&pbuf[0], len);
}
@@ -864,7 +779,7 @@
#ifdef CONFIG_DRIVER_NE2000_CCR
{
- volatile unsigned char *p = (volatile unsigned char *) CONFIG_DRIVER_NE2000_CCR;
+ vu_char *p = (vu_char *) CONFIG_DRIVER_NE2000_CCR;
PRINTK("CCR before is %x\n", *p);
*p = CONFIG_DRIVER_NE2000_VAL;
@@ -873,9 +788,9 @@
#endif
nic_base = CONFIG_DRIVER_NE2000_BASE;
- nic.base = (cyg_uint8 *) CONFIG_DRIVER_NE2000_BASE;
+ nic.base = (u8 *) CONFIG_DRIVER_NE2000_BASE;
- r = get_prom();
+ r = get_prom(dev_addr);
if (!r)
return -1;
@@ -886,22 +801,23 @@
PRINTK("Set environment from HW MAC addr = \"%s\"\n", ethaddr);
setenv ("ethaddr", ethaddr);
-
-#define DP_DATA 0x10
nic.data = nic.base + DP_DATA;
- nic.tx_buf1 = 0x40;
- nic.tx_buf2 = 0x48;
- nic.rx_buf_start = 0x50;
- nic.rx_buf_end = 0x80;
+ nic.tx_buf1 = START_PG;
+ nic.tx_buf2 = START_PG2;
+ nic.rx_buf_start = RX_START;
+ nic.rx_buf_end = RX_END;
if (dp83902a_init() == false)
return -1;
+
dp83902a_start(dev_addr);
initialized=1;
+
return 0;
}
void eth_halt() {
+
PRINTK("### eth_halt\n");
if(initialized)
dp83902a_stop();
@@ -920,7 +836,7 @@
pkey = -1;
- dp83902a_send((unsigned char *) packet, length, 666);
+ dp83902a_send((u8 *) packet, length, 666);
tmo = get_timer (0) + TOUT * CFG_HZ;
while(1) {
dp83902a_poll();
@@ -936,4 +852,3 @@
}
return 0;
}
-#endif
diff --git a/drivers/net/ne2000.h b/drivers/net/ne2000.h
index c13d9f0..d324a00 100644
--- a/drivers/net/ne2000.h
+++ b/drivers/net/ne2000.h
@@ -5,7 +5,6 @@
eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
are GPL, so this is, of course, GPL.
-
==========================================================================
dev/dp83902a.h
@@ -67,213 +66,114 @@
####DESCRIPTIONEND####
==========================================================================
-
*/
/*
- ------------------------------------------------------------------------
- Macros for accessing DP registers
- These can be overridden by the platform header
-*/
+ * NE2000 support header file.
+ * Created by Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ */
-#define DP_IN(_b_, _o_, _d_) (_d_) = *( (volatile unsigned char *) ((_b_)+(_o_)))
-#define DP_OUT(_b_, _o_, _d_) *( (volatile unsigned char *) ((_b_)+(_o_))) = (_d_)
+#ifndef __DRIVERS_NE2000_H__
+#define __DRIVERS_NE2000_H__
-#define DP_IN_DATA(_b_, _d_) (_d_) = *( (volatile unsigned char *) ((_b_)))
-#define DP_OUT_DATA(_b_, _d_) *( (volatile unsigned char *) ((_b_))) = (_d_)
+/* Enable NE2000 basic init function */
+#define NE2000_BASIC_INIT
+#define DP_DATA 0x10
+#define START_PG 0x50 /* First page of TX buffer */
+#define STOP_PG 0x80 /* Last page +1 of RX ring */
-/* here is all the data */
+#define RX_START 0x50
+#define RX_END 0x80
-#define cyg_uint8 unsigned char
-#define cyg_uint16 unsigned short
-#define bool int
+#define DP_IN(_b_, _o_, _d_) (_d_) = *( (vu_char *) ((_b_)+(_o_)))
+#define DP_OUT(_b_, _o_, _d_) *( (vu_char *) ((_b_)+(_o_))) = (_d_)
+#define DP_IN_DATA(_b_, _d_) (_d_) = *( (vu_char *) ((_b_)))
+#define DP_OUT_DATA(_b_, _d_) *( (vu_char *) ((_b_))) = (_d_)
-#define false 0
-#define true 1
+static void pcnet_reset_8390(void)
+{
+ int i, r;
-#define CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA 1
-#define CYGACC_CALL_IF_DELAY_US(X) my_udelay(X)
+ PRINTK("nic base is %lx\n", nic_base);
-typedef struct dp83902a_priv_data {
- cyg_uint8* base;
- cyg_uint8* data;
- cyg_uint8* reset;
- int tx_next; /* First free Tx page */
- int tx_int; /* Expecting interrupt from this buffer */
- int rx_next; /* First free Rx page */
- int tx1, tx2; /* Page numbers for Tx buffers */
- unsigned long tx1_key, tx2_key; /* Used to ack when packet sent */
- int tx1_len, tx2_len;
- bool tx_started, running, hardwired_esa;
- cyg_uint8 esa[6];
- void* plf_priv;
+ n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+ PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
+ n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
+ PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
+ n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+ PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
+ n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
- /* Buffer allocation */
- int tx_buf1, tx_buf2;
- int rx_buf_start, rx_buf_end;
-} dp83902a_priv_data_t;
+ n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
-/*
- ------------------------------------------------------------------------
- Some forward declarations
-*/
-static void dp83902a_poll(void);
+ for (i = 0; i < 100; i++) {
+ if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
+ break;
+ PRINTK("got %x in reset\n", r);
+ udelay(100);
+ }
+ n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */
-/* ------------------------------------------------------------------------ */
-/* Register offsets */
+ if (i == 100)
+ printf("pcnet_reset_8390() did not complete.\n");
+} /* pcnet_reset_8390 */
-#define DP_CR 0x00
-#define DP_CLDA0 0x01
-#define DP_PSTART 0x01 /* write */
-#define DP_CLDA1 0x02
-#define DP_PSTOP 0x02 /* write */
-#define DP_BNDRY 0x03
-#define DP_TSR 0x04
-#define DP_TPSR 0x04 /* write */
-#define DP_NCR 0x05
-#define DP_TBCL 0x05 /* write */
-#define DP_FIFO 0x06
-#define DP_TBCH 0x06 /* write */
-#define DP_ISR 0x07
-#define DP_CRDA0 0x08
-#define DP_RSAL 0x08 /* write */
-#define DP_CRDA1 0x09
-#define DP_RSAH 0x09 /* write */
-#define DP_RBCL 0x0a /* write */
-#define DP_RBCH 0x0b /* write */
-#define DP_RSR 0x0c
-#define DP_RCR 0x0c /* write */
-#define DP_FER 0x0d
-#define DP_TCR 0x0d /* write */
-#define DP_CER 0x0e
-#define DP_DCR 0x0e /* write */
-#define DP_MISSED 0x0f
-#define DP_IMR 0x0f /* write */
-#define DP_DATAPORT 0x10 /* "eprom" data port */
+int get_prom(u8* mac_addr)
+{
+ u8 prom[32];
+ int i, j;
+ struct {
+ u_char value, offset;
+ } program_seq[] = {
+ {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
+ {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
+ {0x00, EN0_RCNTLO}, /* Clear the count regs. */
+ {0x00, EN0_RCNTHI},
+ {0x00, EN0_IMR}, /* Mask completion irq. */
+ {0xFF, EN0_ISR},
+ {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
+ {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
+ {32, EN0_RCNTLO},
+ {0x00, EN0_RCNTHI},
+ {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
+ {0x00, EN0_RSARHI},
+ {E8390_RREAD+E8390_START, E8390_CMD},
+ };
-#define DP_P1_CR 0x00
-#define DP_P1_PAR0 0x01
-#define DP_P1_PAR1 0x02
-#define DP_P1_PAR2 0x03
-#define DP_P1_PAR3 0x04
-#define DP_P1_PAR4 0x05
-#define DP_P1_PAR5 0x06
-#define DP_P1_CURP 0x07
-#define DP_P1_MAR0 0x08
-#define DP_P1_MAR1 0x09
-#define DP_P1_MAR2 0x0a
-#define DP_P1_MAR3 0x0b
-#define DP_P1_MAR4 0x0c
-#define DP_P1_MAR5 0x0d
-#define DP_P1_MAR6 0x0e
-#define DP_P1_MAR7 0x0f
+ PRINTK ("trying to get MAC via prom reading\n");
-#define DP_P2_CR 0x00
-#define DP_P2_PSTART 0x01
-#define DP_P2_CLDA0 0x01 /* write */
-#define DP_P2_PSTOP 0x02
-#define DP_P2_CLDA1 0x02 /* write */
-#define DP_P2_RNPP 0x03
-#define DP_P2_TPSR 0x04
-#define DP_P2_LNPP 0x05
-#define DP_P2_ACH 0x06
-#define DP_P2_ACL 0x07
-#define DP_P2_RCR 0x0c
-#define DP_P2_TCR 0x0d
-#define DP_P2_DCR 0x0e
-#define DP_P2_IMR 0x0f
+ pcnet_reset_8390 ();
-/* Command register - common to all pages */
+ mdelay (10);
-#define DP_CR_STOP 0x01 /* Stop: software reset */
-#define DP_CR_START 0x02 /* Start: initialize device */
-#define DP_CR_TXPKT 0x04 /* Transmit packet */
-#define DP_CR_RDMA 0x08 /* Read DMA (recv data from device) */
-#define DP_CR_WDMA 0x10 /* Write DMA (send data to device) */
-#define DP_CR_SEND 0x18 /* Send packet */
-#define DP_CR_NODMA 0x20 /* Remote (or no) DMA */
-#define DP_CR_PAGE0 0x00 /* Page select */
-#define DP_CR_PAGE1 0x40
-#define DP_CR_PAGE2 0x80
-#define DP_CR_PAGEMSK 0x3F /* Used to mask out page bits */
+ for (i = 0; i < sizeof (program_seq) / sizeof (program_seq[0]); i++)
+ n2k_outb (program_seq[i].value, program_seq[i].offset);
-/* Data configuration register */
-
-#define DP_DCR_WTS 0x01 /* 1=16 bit word transfers */
-#define DP_DCR_BOS 0x02 /* 1=Little Endian */
-#define DP_DCR_LAS 0x04 /* 1=Single 32 bit DMA mode */
-#define DP_DCR_LS 0x08 /* 1=normal mode, 0=loopback */
-#define DP_DCR_ARM 0x10 /* 0=no send command (program I/O) */
-#define DP_DCR_FIFO_1 0x00 /* FIFO threshold */
-#define DP_DCR_FIFO_2 0x20
-#define DP_DCR_FIFO_4 0x40
-#define DP_DCR_FIFO_6 0x60
-
-#define DP_DCR_INIT (DP_DCR_LS|DP_DCR_FIFO_4)
-
-/* Interrupt status register */
-
-#define DP_ISR_RxP 0x01 /* Packet received */
-#define DP_ISR_TxP 0x02 /* Packet transmitted */
-#define DP_ISR_RxE 0x04 /* Receive error */
-#define DP_ISR_TxE 0x08 /* Transmit error */
-#define DP_ISR_OFLW 0x10 /* Receive overflow */
-#define DP_ISR_CNT 0x20 /* Tally counters need emptying */
-#define DP_ISR_RDC 0x40 /* Remote DMA complete */
-#define DP_ISR_RESET 0x80 /* Device has reset (shutdown, error) */
-
-/* Interrupt mask register */
-
-#define DP_IMR_RxP 0x01 /* Packet received */
-#define DP_IMR_TxP 0x02 /* Packet transmitted */
-#define DP_IMR_RxE 0x04 /* Receive error */
-#define DP_IMR_TxE 0x08 /* Transmit error */
-#define DP_IMR_OFLW 0x10 /* Receive overflow */
-#define DP_IMR_CNT 0x20 /* Tall counters need emptying */
-#define DP_IMR_RDC 0x40 /* Remote DMA complete */
-
-#define DP_IMR_All 0x3F /* Everything but remote DMA */
-
-/* Receiver control register */
-
-#define DP_RCR_SEP 0x01 /* Save bad(error) packets */
-#define DP_RCR_AR 0x02 /* Accept runt packets */
-#define DP_RCR_AB 0x04 /* Accept broadcast packets */
-#define DP_RCR_AM 0x08 /* Accept multicast packets */
-#define DP_RCR_PROM 0x10 /* Promiscuous mode */
-#define DP_RCR_MON 0x20 /* Monitor mode - 1=accept no packets */
-
-/* Receiver status register */
-
-#define DP_RSR_RxP 0x01 /* Packet received */
-#define DP_RSR_CRC 0x02 /* CRC error */
-#define DP_RSR_FRAME 0x04 /* Framing error */
-#define DP_RSR_FO 0x08 /* FIFO overrun */
-#define DP_RSR_MISS 0x10 /* Missed packet */
-#define DP_RSR_PHY 0x20 /* 0=pad match, 1=mad match */
-#define DP_RSR_DIS 0x40 /* Receiver disabled */
-#define DP_RSR_DFR 0x80 /* Receiver processing deferred */
-
-/* Transmitter control register */
-
-#define DP_TCR_NOCRC 0x01 /* 1=inhibit CRC */
-#define DP_TCR_NORMAL 0x00 /* Normal transmitter operation */
-#define DP_TCR_LOCAL 0x02 /* Internal NIC loopback */
-#define DP_TCR_INLOOP 0x04 /* Full internal loopback */
-#define DP_TCR_OUTLOOP 0x08 /* External loopback */
-#define DP_TCR_ATD 0x10 /* Auto transmit disable */
-#define DP_TCR_OFFSET 0x20 /* Collision offset adjust */
-
-/* Transmit status register */
-
-#define DP_TSR_TxP 0x01 /* Packet transmitted */
-#define DP_TSR_COL 0x04 /* Collision (at least one) */
-#define DP_TSR_ABT 0x08 /* Aborted because of too many collisions */
-#define DP_TSR_CRS 0x10 /* Lost carrier */
-#define DP_TSR_FU 0x20 /* FIFO underrun */
-#define DP_TSR_CDH 0x40 /* Collision Detect Heartbeat */
-#define DP_TSR_OWC 0x80 /* Collision outside normal window */
-
-#define IEEE_8023_MAX_FRAME 1518 /* Largest possible ethernet frame */
-#define IEEE_8023_MIN_FRAME 64 /* Smallest possible ethernet frame */
+ PRINTK ("PROM:");
+ for (i = 0; i < 32; i++) {
+ prom[i] = n2k_inb (PCNET_DATAPORT);
+ PRINTK (" %02x", prom[i]);
+ }
+ PRINTK ("\n");
+ for (i = 0; i < NR_INFO; i++) {
+ if ((prom[0] == hw_info[i].a0) &&
+ (prom[2] == hw_info[i].a1) &&
+ (prom[4] == hw_info[i].a2)) {
+ PRINTK ("matched board %d\n", i);
+ break;
+ }
+ }
+ if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
+ PRINTK ("on exit i is %d/%ld\n", i, NR_INFO);
+ PRINTK ("MAC address is ");
+ for (j = 0; j < 6; j++) {
+ mac_addr[j] = prom[j << 1];
+ PRINTK ("%02x:", mac_addr[i]);
+ }
+ PRINTK ("\n");
+ return (i < NR_INFO) ? i : 0;
+ }
+ return NULL;
+}
+#endif /* __DRIVERS_NE2000_H__ */
diff --git a/drivers/net/ne2000_base.h b/drivers/net/ne2000_base.h
new file mode 100644
index 0000000..1badf62
--- /dev/null
+++ b/drivers/net/ne2000_base.h
@@ -0,0 +1,282 @@
+/*
+Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
+
+Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
+eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
+are GPL, so this is, of course, GPL.
+
+
+==========================================================================
+
+ dev/dp83902a.h
+
+ National Semiconductor DP83902a ethernet chip
+
+==========================================================================
+####ECOSGPLCOPYRIGHTBEGIN####
+ -------------------------------------------
+ This file is part of eCos, the Embedded Configurable Operating System.
+ Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+
+ eCos is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2 or (at your option) any later version.
+
+ eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with eCos; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+ As a special exception, if other files instantiate templates or use macros
+ or inline functions from this file, or you compile this file and link it
+ with other works to produce a work based on this file, this file does not
+ by itself cause the resulting work to be covered by the GNU General Public
+ License. However the source code for this file must still be made available
+ in accordance with section (3) of the GNU General Public License.
+
+ This exception does not invalidate any other reasons why a work based on
+ this file might be covered by the GNU General Public License.
+
+ Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+ at http://sources.redhat.com/ecos/ecos-license/
+ -------------------------------------------
+####ECOSGPLCOPYRIGHTEND####
+####BSDCOPYRIGHTBEGIN####
+
+ -------------------------------------------
+
+ Portions of this software may have been derived from OpenBSD or other sources,
+ and are covered by the appropriate copyright disclaimers included herein.
+
+ -------------------------------------------
+
+####BSDCOPYRIGHTEND####
+==========================================================================
+#####DESCRIPTIONBEGIN####
+
+ Author(s): gthomas
+ Contributors: gthomas, jskov
+ Date: 2001-06-13
+ Purpose:
+ Description:
+
+####DESCRIPTIONEND####
+
+==========================================================================
+
+*/
+
+/*
+ ------------------------------------------------------------------------
+ Macros for accessing DP registers
+ These can be overridden by the platform header
+*/
+
+#define bool int
+
+#define false 0
+#define true 1
+
+/* timeout for tx/rx in s */
+#define TOUT 5
+/* Ether MAC address size */
+#define ETHER_ADDR_LEN 6
+
+
+#define CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA 1
+#define CYGACC_CALL_IF_DELAY_US(X) udelay(X)
+
+/* H/W infomation struct */
+typedef struct hw_info_t {
+ u32 offset;
+ u8 a0, a1, a2;
+ u32 flags;
+} hw_info_t;
+
+typedef struct dp83902a_priv_data {
+ u8* base;
+ u8* data;
+ u8* reset;
+ int tx_next; /* First free Tx page */
+ int tx_int; /* Expecting interrupt from this buffer */
+ int rx_next; /* First free Rx page */
+ int tx1, tx2; /* Page numbers for Tx buffers */
+ u32 tx1_key, tx2_key; /* Used to ack when packet sent */
+ int tx1_len, tx2_len;
+ bool tx_started, running, hardwired_esa;
+ u8 esa[6];
+ void* plf_priv;
+
+ /* Buffer allocation */
+ int tx_buf1, tx_buf2;
+ int rx_buf_start, rx_buf_end;
+} dp83902a_priv_data_t;
+
+/*
+ ------------------------------------------------------------------------
+ Some forward declarations
+*/
+int get_prom( u8* mac_addr);
+static void dp83902a_poll(void);
+
+/* ------------------------------------------------------------------------ */
+/* Register offsets */
+
+#define DP_CR 0x00
+#define DP_CLDA0 0x01
+#define DP_PSTART 0x01 /* write */
+#define DP_CLDA1 0x02
+#define DP_PSTOP 0x02 /* write */
+#define DP_BNDRY 0x03
+#define DP_TSR 0x04
+#define DP_TPSR 0x04 /* write */
+#define DP_NCR 0x05
+#define DP_TBCL 0x05 /* write */
+#define DP_FIFO 0x06
+#define DP_TBCH 0x06 /* write */
+#define DP_ISR 0x07
+#define DP_CRDA0 0x08
+#define DP_RSAL 0x08 /* write */
+#define DP_CRDA1 0x09
+#define DP_RSAH 0x09 /* write */
+#define DP_RBCL 0x0a /* write */
+#define DP_RBCH 0x0b /* write */
+#define DP_RSR 0x0c
+#define DP_RCR 0x0c /* write */
+#define DP_FER 0x0d
+#define DP_TCR 0x0d /* write */
+#define DP_CER 0x0e
+#define DP_DCR 0x0e /* write */
+#define DP_MISSED 0x0f
+#define DP_IMR 0x0f /* write */
+#define DP_DATAPORT 0x10 /* "eprom" data port */
+
+#define DP_P1_CR 0x00
+#define DP_P1_PAR0 0x01
+#define DP_P1_PAR1 0x02
+#define DP_P1_PAR2 0x03
+#define DP_P1_PAR3 0x04
+#define DP_P1_PAR4 0x05
+#define DP_P1_PAR5 0x06
+#define DP_P1_CURP 0x07
+#define DP_P1_MAR0 0x08
+#define DP_P1_MAR1 0x09
+#define DP_P1_MAR2 0x0a
+#define DP_P1_MAR3 0x0b
+#define DP_P1_MAR4 0x0c
+#define DP_P1_MAR5 0x0d
+#define DP_P1_MAR6 0x0e
+#define DP_P1_MAR7 0x0f
+
+#define DP_P2_CR 0x00
+#define DP_P2_PSTART 0x01
+#define DP_P2_CLDA0 0x01 /* write */
+#define DP_P2_PSTOP 0x02
+#define DP_P2_CLDA1 0x02 /* write */
+#define DP_P2_RNPP 0x03
+#define DP_P2_TPSR 0x04
+#define DP_P2_LNPP 0x05
+#define DP_P2_ACH 0x06
+#define DP_P2_ACL 0x07
+#define DP_P2_RCR 0x0c
+#define DP_P2_TCR 0x0d
+#define DP_P2_DCR 0x0e
+#define DP_P2_IMR 0x0f
+
+/* Command register - common to all pages */
+
+#define DP_CR_STOP 0x01 /* Stop: software reset */
+#define DP_CR_START 0x02 /* Start: initialize device */
+#define DP_CR_TXPKT 0x04 /* Transmit packet */
+#define DP_CR_RDMA 0x08 /* Read DMA (recv data from device) */
+#define DP_CR_WDMA 0x10 /* Write DMA (send data to device) */
+#define DP_CR_SEND 0x18 /* Send packet */
+#define DP_CR_NODMA 0x20 /* Remote (or no) DMA */
+#define DP_CR_PAGE0 0x00 /* Page select */
+#define DP_CR_PAGE1 0x40
+#define DP_CR_PAGE2 0x80
+#define DP_CR_PAGEMSK 0x3F /* Used to mask out page bits */
+
+/* Data configuration register */
+
+#define DP_DCR_WTS 0x01 /* 1=16 bit word transfers */
+#define DP_DCR_BOS 0x02 /* 1=Little Endian */
+#define DP_DCR_LAS 0x04 /* 1=Single 32 bit DMA mode */
+#define DP_DCR_LS 0x08 /* 1=normal mode, 0=loopback */
+#define DP_DCR_ARM 0x10 /* 0=no send command (program I/O) */
+#define DP_DCR_FIFO_1 0x00 /* FIFO threshold */
+#define DP_DCR_FIFO_2 0x20
+#define DP_DCR_FIFO_4 0x40
+#define DP_DCR_FIFO_6 0x60
+
+#define DP_DCR_INIT (DP_DCR_LS|DP_DCR_FIFO_4)
+
+/* Interrupt status register */
+
+#define DP_ISR_RxP 0x01 /* Packet received */
+#define DP_ISR_TxP 0x02 /* Packet transmitted */
+#define DP_ISR_RxE 0x04 /* Receive error */
+#define DP_ISR_TxE 0x08 /* Transmit error */
+#define DP_ISR_OFLW 0x10 /* Receive overflow */
+#define DP_ISR_CNT 0x20 /* Tally counters need emptying */
+#define DP_ISR_RDC 0x40 /* Remote DMA complete */
+#define DP_ISR_RESET 0x80 /* Device has reset (shutdown, error) */
+
+/* Interrupt mask register */
+
+#define DP_IMR_RxP 0x01 /* Packet received */
+#define DP_IMR_TxP 0x02 /* Packet transmitted */
+#define DP_IMR_RxE 0x04 /* Receive error */
+#define DP_IMR_TxE 0x08 /* Transmit error */
+#define DP_IMR_OFLW 0x10 /* Receive overflow */
+#define DP_IMR_CNT 0x20 /* Tall counters need emptying */
+#define DP_IMR_RDC 0x40 /* Remote DMA complete */
+
+#define DP_IMR_All 0x3F /* Everything but remote DMA */
+
+/* Receiver control register */
+
+#define DP_RCR_SEP 0x01 /* Save bad(error) packets */
+#define DP_RCR_AR 0x02 /* Accept runt packets */
+#define DP_RCR_AB 0x04 /* Accept broadcast packets */
+#define DP_RCR_AM 0x08 /* Accept multicast packets */
+#define DP_RCR_PROM 0x10 /* Promiscuous mode */
+#define DP_RCR_MON 0x20 /* Monitor mode - 1=accept no packets */
+
+/* Receiver status register */
+
+#define DP_RSR_RxP 0x01 /* Packet received */
+#define DP_RSR_CRC 0x02 /* CRC error */
+#define DP_RSR_FRAME 0x04 /* Framing error */
+#define DP_RSR_FO 0x08 /* FIFO overrun */
+#define DP_RSR_MISS 0x10 /* Missed packet */
+#define DP_RSR_PHY 0x20 /* 0=pad match, 1=mad match */
+#define DP_RSR_DIS 0x40 /* Receiver disabled */
+#define DP_RSR_DFR 0x80 /* Receiver processing deferred */
+
+/* Transmitter control register */
+
+#define DP_TCR_NOCRC 0x01 /* 1=inhibit CRC */
+#define DP_TCR_NORMAL 0x00 /* Normal transmitter operation */
+#define DP_TCR_LOCAL 0x02 /* Internal NIC loopback */
+#define DP_TCR_INLOOP 0x04 /* Full internal loopback */
+#define DP_TCR_OUTLOOP 0x08 /* External loopback */
+#define DP_TCR_ATD 0x10 /* Auto transmit disable */
+#define DP_TCR_OFFSET 0x20 /* Collision offset adjust */
+
+/* Transmit status register */
+
+#define DP_TSR_TxP 0x01 /* Packet transmitted */
+#define DP_TSR_COL 0x04 /* Collision (at least one) */
+#define DP_TSR_ABT 0x08 /* Aborted because of too many collisions */
+#define DP_TSR_CRS 0x10 /* Lost carrier */
+#define DP_TSR_FU 0x20 /* FIFO underrun */
+#define DP_TSR_CDH 0x40 /* Collision Detect Heartbeat */
+#define DP_TSR_OWC 0x80 /* Collision outside normal window */
+
+#define IEEE_8023_MAX_FRAME 1518 /* Largest possible ethernet frame */
+#define IEEE_8023_MIN_FRAME 64 /* Smallest possible ethernet frame */
diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h
index d03cbc3..8dcbb3e 100644
--- a/drivers/net/smc91111.h
+++ b/drivers/net/smc91111.h
@@ -186,7 +186,7 @@
#ifdef CONFIG_ADNPESC1
#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+((r)<<1))))
#elif CONFIG_BLACKFIN
-#define SMC_inw(r) ({ word __v = (*((volatile word *)(SMC_BASE_ADDRESS+(r)))); asm("ssync;"); __v;})
+#define SMC_inw(r) ({ word __v = (*((volatile word *)(SMC_BASE_ADDRESS+(r)))); SSYNC(); __v;})
#else
#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
#endif
@@ -195,7 +195,7 @@
#ifdef CONFIG_ADNPESC1
#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+((r)<<1))) = d)
#elif CONFIG_BLACKFIN
-#define SMC_outw(d,r) {(*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d);asm("ssync;");}
+#define SMC_outw(d,r) {(*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d); SSYNC();}
#else
#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d)
#endif
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index e91d9ea..431a8d2 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -583,10 +583,11 @@
uint speed;
mii_reg = read_phy_reg(priv, MIIM_RTL8211B_PHY_STATUS);
- if ((mii_reg & MIIM_RTL8211B_PHYSTAT_LINK) &&
- !(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
+ if (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
int i = 0;
+ /* in case of timeout ->link is cleared */
+ priv->link = 1;
puts("Waiting for PHY realtime link");
while (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
/* Timeout reached ? */
diff --git a/drivers/net/vsc7385.c b/drivers/net/vsc7385.c
new file mode 100644
index 0000000..f440ce0
--- /dev/null
+++ b/drivers/net/vsc7385.c
@@ -0,0 +1,101 @@
+/*
+ * Vitesse 7385 Switch Firmware Upload
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. This file is licensed
+ * under the terms of the GNU General Public License version 2. This
+ * program is licensed "as is" without any warranty of any kind, whether
+ * express or implied.
+ *
+ * This module uploads proprietary firmware for the Vitesse VSC7385 5-port
+ * switch.
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_VSC7385_ENET
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+
+/*
+ * Upload a Vitesse VSC7385 firmware image to the hardware
+ *
+ * This function takes a pointer to a VSC7385 firmware image and a size, and
+ * uploads that firmware to the VSC7385.
+ *
+ * This firmware is typically located at a board-specific flash address,
+ * and the size is typically 8KB.
+ *
+ * The firmware is Vitesse proprietary.
+ *
+ * Further details on the register information can be obtained from Vitesse.
+ */
+int vsc7385_upload_firmware(void *firmware, unsigned int size)
+{
+ u8 *fw = firmware;
+ unsigned int i;
+
+ u32 *gloreset = (u32 *) (CFG_VSC7385_BASE + 0x1c050);
+ u32 *icpu_ctrl = (u32 *) (CFG_VSC7385_BASE + 0x1c040);
+ u32 *icpu_addr = (u32 *) (CFG_VSC7385_BASE + 0x1c044);
+ u32 *icpu_data = (u32 *) (CFG_VSC7385_BASE + 0x1c048);
+ u32 *icpu_rom_map = (u32 *) (CFG_VSC7385_BASE + 0x1c070);
+#ifdef DEBUG
+ u32 *chipid = (u32 *) (CFG_VSC7385_BASE + 0x1c060);
+#endif
+
+ out_be32(gloreset, 3);
+ udelay(200);
+
+ out_be32(icpu_ctrl, 0x8E);
+ udelay(20);
+
+ out_be32(icpu_rom_map, 1);
+ udelay(20);
+
+ /* Write the firmware to I-RAM */
+ out_be32(icpu_addr, 0);
+ udelay(20);
+
+ for (i = 0; i < size; i++) {
+ out_be32(icpu_data, fw[i]);
+ udelay(20);
+ if (ctrlc())
+ return -EINTR;
+ }
+
+ /* Read back and compare */
+ out_be32(icpu_addr, 0);
+ udelay(20);
+
+ for (i = 0; i < size; i++) {
+ u8 value;
+
+ value = (u8) in_be32(icpu_data);
+ udelay(20);
+ if (value != fw[i]) {
+ debug("VSC7385: Upload mismatch: address 0x%x, "
+ "read value 0x%x, image value 0x%x\n",
+ i, value, fw[i]);
+
+ return -EIO;
+ }
+ if (ctrlc())
+ break;
+ }
+
+ out_be32(icpu_ctrl, 0x0B);
+ udelay(20);
+
+#ifdef DEBUG
+ printf("VSC7385: Chip ID is %08x\n", in_be32(chipid));
+ udelay(20);
+#endif
+
+ return 0;
+}
+
+#endif
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 50ca6b0..7944b66 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -425,6 +425,9 @@
dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1);
dev += PCI_BDF(0,0,1))
{
+
+ /* Bus 0 is not necessarily PCI bridge. */
+#if defined(CONFIG_PCI_SKIP_HOST_BRIDGE)
/* Skip our host bridge */
if ( dev == PCI_BDF(hose->first_busno,0,0) ) {
#if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */
@@ -434,10 +437,11 @@
if (getenv("pciconfighost") == NULL) {
continue; /* Skip our host bridge */
}
-#else
+#else /* CONFIG_PCI_CONFIG_HOST_BRIDGE */
continue; /* Skip our host bridge */
-#endif
+#endif /* CONFIG_PCI_CONFIG_HOST_BRIDGE */
}
+#endif /* CONFIG_PCI_SKIP_HOST_BRIDGE */
if (PCI_FUNC(dev) && !found_multi)
continue;
@@ -473,8 +477,11 @@
hose->fixup_irq(hose, dev);
#ifdef CONFIG_PCI_SCAN_SHOW
+#if defined(CONFIG_PCI_SKIP_HOST_BRIDGE)
/* Skip our host bridge */
- if ( dev != PCI_BDF(hose->first_busno,0,0) ) {
+ if ( dev != PCI_BDF(hose->first_busno,0,0) )
+#endif
+ {
unsigned char int_line;
pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE,
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 55f37cb..d34430c 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -417,6 +417,7 @@
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
upsmr |= (UPSMR_RPM | UPSMR_TBIM);
break;
+ case ENET_1000_RGMII_RXID:
case ENET_1000_RGMII:
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
upsmr |= UPSMR_RPM;
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index c384055..7762de6 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -642,6 +642,7 @@
ENET_100_RGMII,
ENET_1000_GMII,
ENET_1000_RGMII,
+ ENET_1000_RGMII_RXID,
ENET_1000_TBI,
ENET_1000_RTBI
} enet_interface_e;
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index a42701c..423ba78 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -318,16 +318,26 @@
return err;
if (mii_info->autoneg) {
- status = phy_read (mii_info, PHY_ANLPAR);
+ status = phy_read(mii_info, MII_1000BASETSTATUS);
- if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
- mii_info->duplex = DUPLEX_FULL;
- else
- mii_info->duplex = DUPLEX_HALF;
- if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
- mii_info->speed = SPEED_100;
- else
- mii_info->speed = SPEED_10;
+ if (status & (LPA_1000FULL | LPA_1000HALF)) {
+ mii_info->speed = SPEED_1000;
+ if (status & LPA_1000FULL)
+ mii_info->duplex = DUPLEX_FULL;
+ else
+ mii_info->duplex = DUPLEX_HALF;
+ } else {
+ status = phy_read(mii_info, PHY_ANLPAR);
+
+ if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
+ mii_info->duplex = DUPLEX_FULL;
+ else
+ mii_info->duplex = DUPLEX_HALF;
+ if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
+ mii_info->speed = SPEED_100;
+ else
+ mii_info->speed = SPEED_10;
+ }
mii_info->pause = 0;
}
/* On non-aneg, we assume what we put in BMCR is the speed,
@@ -337,6 +347,37 @@
return 0;
}
+static int bcm_init(struct uec_mii_info *mii_info)
+{
+ struct eth_device *edev = mii_info->dev;
+ uec_private_t *uec = edev->priv;
+
+ gbit_config_aneg(mii_info);
+
+ if (uec->uec_info->enet_interface == ENET_1000_RGMII_RXID) {
+ u16 val;
+ int cnt = 50;
+
+ /* Wait for aneg to complete. */
+ do
+ val = phy_read(mii_info, PHY_BMSR);
+ while (--cnt && !(val & PHY_BMSR_AUTN_COMP));
+
+ /* Set RDX clk delay. */
+ phy_write(mii_info, 0x18, 0x7 | (7 << 12));
+
+ val = phy_read(mii_info, 0x18);
+ /* Set RDX-RXC skew. */
+ val |= (1 << 8);
+ val |= (7 | (7 << 12));
+ /* Write bits 14:0. */
+ val |= (1 << 15);
+ phy_write(mii_info, 0x18, val);
+ }
+
+ return 0;
+}
+
static int marvell_read_status (struct uec_mii_info *mii_info)
{
u16 status;
@@ -505,6 +546,15 @@
.config_intr = &marvell_config_intr,
};
+static struct phy_info phy_info_bcm5481 = {
+ .phy_id = 0x0143bca0,
+ .phy_id_mask = 0xffffff0,
+ .name = "Broadcom 5481",
+ .features = MII_GBIT_FEATURES,
+ .read_status = genmii_read_status,
+ .init = bcm_init,
+};
+
static struct phy_info phy_info_genmii = {
.phy_id = 0x00000000,
.phy_id_mask = 0x00000000,
@@ -518,6 +568,7 @@
&phy_info_dm9161,
&phy_info_dm9161a,
&phy_info_marvell,
+ &phy_info_bcm5481,
&phy_info_genmii,
NULL
};
diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h
index e59a940..6f769fb 100644
--- a/drivers/qe/uec_phy.h
+++ b/drivers/qe/uec_phy.h
@@ -29,6 +29,11 @@
#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200
#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100
+/* 1000BT status */
+#define MII_1000BASETSTATUS 0x0a
+#define LPA_1000FULL 0x0400
+#define LPA_1000HALF 0x0200
+
/* Cicada Extended Control Register 1 */
#define MII_CIS8201_EXT_CON1 0x17
#define MII_CIS8201_EXTCON1_INIT 0x0000
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 2af2bf4..800ab99 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -27,8 +27,8 @@
LIB = $(obj)librtc.a
-COBJS-y += date.o
COBJS-y += bfin_rtc.o
+COBJS-y += date.o
COBJS-y += ds12887.o
COBJS-y += ds1302.o
COBJS-y += ds1306.o
@@ -39,19 +39,21 @@
COBJS-y += ds164x.o
COBJS-y += ds174x.o
COBJS-y += ds3231.o
+COBJS-$(CONFIG_RTC_ISL1208) += isl1208.o
COBJS-y += m41t11.o
COBJS-y += m41t60.o
-COBJS-y += max6900.o
+COBJS-$(CONFIG_RTC_M41T62) += m41t62.o
COBJS-y += m48t35ax.o
+COBJS-y += max6900.o
COBJS-y += mc146818.o
+COBJS-y += mcfrtc.o
COBJS-y += mk48t59.o
COBJS-y += mpc5xxx.o
COBJS-y += mpc8xx.o
COBJS-y += pcf8563.o
-COBJS-y += s3c24x0_rtc.o
COBJS-y += rs5c372.o
COBJS-y += rx8025.o
-COBJS-y += mcfrtc.o
+COBJS-y += s3c24x0_rtc.o
COBJS-y += x1205.o
COBJS := $(COBJS-y)
diff --git a/drivers/rtc/bfin_rtc.c b/drivers/rtc/bfin_rtc.c
index 5755a20..ce4f171 100644
--- a/drivers/rtc/bfin_rtc.c
+++ b/drivers/rtc/bfin_rtc.c
@@ -85,7 +85,7 @@
}
/* Read the time from the RTC_STAT. time_in_seconds is seconds since Jan 1970 */
-void rtc_get(struct rtc_time *tmp)
+int rtc_get(struct rtc_time *tmp)
{
uint32_t cur_rtc_stat;
int time_in_sec;
@@ -95,7 +95,7 @@
if (tmp == NULL) {
puts("Error getting the date/time\n");
- return;
+ return -1;
}
wait_for_complete();
@@ -112,6 +112,8 @@
/* Calculate the total number of seconds since epoch */
time_in_sec = (tm_sec) + MIN_TO_SECS(tm_min) + HRS_TO_SECS(tm_hr) + DAYS_TO_SECS(tm_day);
to_tm(time_in_sec, tmp);
+
+ return 0;
}
#endif
diff --git a/drivers/rtc/ds12887.c b/drivers/rtc/ds12887.c
index 84fecf0..57a446d 100644
--- a/drivers/rtc/ds12887.c
+++ b/drivers/rtc/ds12887.c
@@ -88,7 +88,7 @@
/* ------------------------------------------------------------------------- */
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
uchar sec, min, hour, mday, wday, mon, year;
@@ -150,6 +150,8 @@
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
#endif
+
+ return 0;
}
void rtc_set (struct rtc_time *tmp)
diff --git a/drivers/rtc/ds1302.c b/drivers/rtc/ds1302.c
index 55af130..3a856c8 100644
--- a/drivers/rtc/ds1302.c
+++ b/drivers/rtc/ds1302.c
@@ -253,9 +253,10 @@
/* TODO */
}
-void
+int
rtc_get(struct rtc_time *tmp)
{
+ int rel = 0;
struct ds1302_st bbclk;
if(!ds1302_initted) rtc_init();
@@ -265,6 +266,7 @@
if (bbclk.CH) {
printf("ds1302: rtc_get: Clock was halted, clock probably "
"corrupt\n");
+ rel = -1;
}
tmp->tm_sec=10*bbclk.sec10+bbclk.sec;
@@ -281,6 +283,8 @@
DPRINTF("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
+
+ return rel;
}
void
diff --git a/drivers/rtc/ds1306.c b/drivers/rtc/ds1306.c
index 89e433d..1c8ac7f 100644
--- a/drivers/rtc/ds1306.c
+++ b/drivers/rtc/ds1306.c
@@ -91,7 +91,7 @@
/* ------------------------------------------------------------------------- */
/* read clock time from DS1306 and return it in *tmp */
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
unsigned char spi_byte; /* Data Byte */
@@ -141,6 +141,8 @@
debug ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return 0;
}
/* ------------------------------------------------------------------------- */
@@ -304,7 +306,7 @@
static void rtc_write (unsigned char reg, unsigned char val);
/* read clock time from DS1306 and return it in *tmp */
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
unsigned char sec, min, hour, mday, wday, mon, year;
@@ -349,6 +351,8 @@
debug ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return 0;
}
/* ------------------------------------------------------------------------- */
diff --git a/drivers/rtc/ds1307.c b/drivers/rtc/ds1307.c
index c882d79..b20f193 100644
--- a/drivers/rtc/ds1307.c
+++ b/drivers/rtc/ds1307.c
@@ -83,8 +83,9 @@
/*
* Get the current time from the RTC
*/
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
+ int rel = 0;
uchar sec, min, hour, mday, wday, mon, year;
sec = rtc_read (RTC_SEC_REG_ADDR);
@@ -104,6 +105,7 @@
/* clear the CH flag */
rtc_write (RTC_SEC_REG_ADDR,
rtc_read (RTC_SEC_REG_ADDR) & ~RTC_SEC_BIT_CH);
+ rel = -1;
}
tmp->tm_sec = bcd2bin (sec & 0x7F);
@@ -119,6 +121,8 @@
DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return rel;
}
diff --git a/drivers/rtc/ds1337.c b/drivers/rtc/ds1337.c
index c636ac5..50ab446 100644
--- a/drivers/rtc/ds1337.c
+++ b/drivers/rtc/ds1337.c
@@ -84,8 +84,9 @@
/*
* Get the current time from the RTC
*/
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
+ int rel = 0;
uchar sec, min, hour, mday, wday, mon_cent, year, control, status;
control = rtc_read (RTC_CTL_REG_ADDR);
@@ -107,6 +108,7 @@
/* clear the OSF flag */
rtc_write (RTC_STAT_REG_ADDR,
rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF);
+ rel = -1;
}
tmp->tm_sec = bcd2bin (sec & 0x7F);
@@ -122,6 +124,8 @@
DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return rel;
}
diff --git a/drivers/rtc/ds1374.c b/drivers/rtc/ds1374.c
index e773dd9..f6bb296 100644
--- a/drivers/rtc/ds1374.c
+++ b/drivers/rtc/ds1374.c
@@ -107,8 +107,8 @@
/*
* Get the current time from the RTC
*/
-void rtc_get (struct rtc_time *tm){
-
+int rtc_get (struct rtc_time *tm){
+ int rel = 0;
unsigned long time1, time2;
unsigned int limit;
unsigned char tmp;
@@ -138,18 +138,23 @@
if (time1 != time2) {
printf("can't get consistent time from rtc chip\n");
+ rel = -1;
}
DEBUGR ("Get RTC s since 1.1.1970: %d\n", time1);
to_tm(time1, tm); /* To Gregorian Date */
- if (rtc_read(RTC_SR_ADDR) & RTC_SR_BIT_OSF)
+ if (rtc_read(RTC_SR_ADDR) & RTC_SR_BIT_OSF) {
printf ("### Warning: RTC oscillator has stopped\n");
+ rel = -1;
+ }
DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+ return rel;
}
/*
diff --git a/drivers/rtc/ds1556.c b/drivers/rtc/ds1556.c
index 4365cfb..2c496f5 100644
--- a/drivers/rtc/ds1556.c
+++ b/drivers/rtc/ds1556.c
@@ -69,7 +69,7 @@
/* ------------------------------------------------------------------------- */
-void rtc_get( struct rtc_time *tmp )
+int rtc_get( struct rtc_time *tmp )
{
uchar sec, min, hour;
uchar mday, wday, mon, year;
@@ -118,6 +118,7 @@
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
#endif
+ return 0;
}
void rtc_set( struct rtc_time *tmp )
diff --git a/drivers/rtc/ds164x.c b/drivers/rtc/ds164x.c
index bff22b9..5943f87 100644
--- a/drivers/rtc/ds164x.c
+++ b/drivers/rtc/ds164x.c
@@ -70,7 +70,7 @@
/* ------------------------------------------------------------------------- */
-void rtc_get( struct rtc_time *tmp )
+int rtc_get( struct rtc_time *tmp )
{
uchar sec, min, hour;
uchar mday, wday, mon, year;
@@ -115,6 +115,8 @@
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
#endif
+
+ return 0;
}
void rtc_set( struct rtc_time *tmp )
diff --git a/drivers/rtc/ds174x.c b/drivers/rtc/ds174x.c
index 5f85a68..81a9cb3 100644
--- a/drivers/rtc/ds174x.c
+++ b/drivers/rtc/ds174x.c
@@ -65,7 +65,7 @@
/* ------------------------------------------------------------------------- */
-void rtc_get( struct rtc_time *tmp )
+int rtc_get( struct rtc_time *tmp )
{
uchar sec, min, hour;
uchar mday, wday, mon, year;
@@ -142,6 +142,8 @@
/* unlock clock registers after read */
rtc_write( RTC_CONTROLA, ( reg_a & ~RTC_CA_WRITE ));
+
+ return 0;
}
void rtc_reset (void)
diff --git a/drivers/rtc/ds3231.c b/drivers/rtc/ds3231.c
index fe11b86..95cb186 100644
--- a/drivers/rtc/ds3231.c
+++ b/drivers/rtc/ds3231.c
@@ -86,8 +86,9 @@
/*
* Get the current time from the RTC
*/
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
+ int rel = 0;
uchar sec, min, hour, mday, wday, mon_cent, year, control, status;
control = rtc_read (RTC_CTL_REG_ADDR);
@@ -109,6 +110,7 @@
/* clear the OSF flag */
rtc_write (RTC_STAT_REG_ADDR,
rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF);
+ rel = -1;
}
tmp->tm_sec = bcd2bin (sec & 0x7F);
@@ -124,6 +126,8 @@
DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return rel;
}
diff --git a/drivers/rtc/isl1208.c b/drivers/rtc/isl1208.c
new file mode 100644
index 0000000..3d46fd0
--- /dev/null
+++ b/drivers/rtc/isl1208.c
@@ -0,0 +1,170 @@
+/*
+ * (C) Copyright 2008
+ * Tor Krill, Excito Elektronik i Skåne , tor@excito.com
+ *
+ * Modelled after the ds1337 driver
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Date & Time support (no alarms) for Intersil
+ * ISL1208 Real Time Clock (RTC).
+ */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+#include <i2c.h>
+
+/*---------------------------------------------------------------------*/
+#ifdef DEBUG_RTC
+#define DEBUGR(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGR(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+/*
+ * RTC register addresses
+ */
+
+#define RTC_SEC_REG_ADDR 0x0
+#define RTC_MIN_REG_ADDR 0x1
+#define RTC_HR_REG_ADDR 0x2
+#define RTC_DATE_REG_ADDR 0x3
+#define RTC_MON_REG_ADDR 0x4
+#define RTC_YR_REG_ADDR 0x5
+#define RTC_DAY_REG_ADDR 0x6
+#define RTC_STAT_REG_ADDR 0x7
+/*
+ * RTC control register bits
+ */
+
+/*
+ * RTC status register bits
+ */
+#define RTC_STAT_BIT_ARST 0x80 /* AUTO RESET ENABLE BIT */
+#define RTC_STAT_BIT_XTOSCB 0x40 /* CRYSTAL OSCILLATOR ENABLE BIT */
+#define RTC_STAT_BIT_WRTC 0x10 /* WRITE RTC ENABLE BIT */
+#define RTC_STAT_BIT_ALM 0x04 /* ALARM BIT */
+#define RTC_STAT_BIT_BAT 0x02 /* BATTERY BIT */
+#define RTC_STAT_BIT_RTCF 0x01 /* REAL TIME CLOCK FAIL BIT */
+
+static uchar rtc_read (uchar reg);
+static void rtc_write (uchar reg, uchar val);
+static uchar bin2bcd (unsigned int n);
+static unsigned bcd2bin (uchar c);
+
+/*
+ * Get the current time from the RTC
+ */
+
+int rtc_get (struct rtc_time *tmp)
+{
+ int rel = 0;
+ uchar sec, min, hour, mday, wday, mon, year, status;
+
+ status = rtc_read (RTC_STAT_REG_ADDR);
+ sec = rtc_read (RTC_SEC_REG_ADDR);
+ min = rtc_read (RTC_MIN_REG_ADDR);
+ hour = rtc_read (RTC_HR_REG_ADDR);
+ wday = rtc_read (RTC_DAY_REG_ADDR);
+ mday = rtc_read (RTC_DATE_REG_ADDR);
+ mon = rtc_read (RTC_MON_REG_ADDR);
+ year = rtc_read (RTC_YR_REG_ADDR);
+
+ DEBUGR ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
+ "hr: %02x min: %02x sec: %02x status: %02x\n",
+ year, mon, mday, wday, hour, min, sec, status);
+
+ if (status & RTC_STAT_BIT_RTCF) {
+ printf ("### Warning: RTC oscillator has stopped\n");
+ rtc_write(RTC_STAT_REG_ADDR,
+ rtc_read(RTC_STAT_REG_ADDR) &~ (RTC_STAT_BIT_BAT|RTC_STAT_BIT_RTCF));
+ rel = -1;
+ }
+
+ tmp->tm_sec = bcd2bin (sec & 0x7F);
+ tmp->tm_min = bcd2bin (min & 0x7F);
+ tmp->tm_hour = bcd2bin (hour & 0x3F);
+ tmp->tm_mday = bcd2bin (mday & 0x3F);
+ tmp->tm_mon = bcd2bin (mon & 0x1F);
+ tmp->tm_year = bcd2bin (year)+2000;
+ tmp->tm_wday = bcd2bin (wday & 0x07);
+ tmp->tm_yday = 0;
+ tmp->tm_isdst= 0;
+
+ DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return rel;
+}
+
+/*
+ * Set the RTC
+ */
+void rtc_set (struct rtc_time *tmp)
+{
+ DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ /* enable write */
+ rtc_write(RTC_STAT_REG_ADDR,
+ rtc_read(RTC_STAT_REG_ADDR) | RTC_STAT_BIT_WRTC);
+
+ rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
+ rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon));
+ rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday));
+ rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
+ rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour) | 0x80 ); /* 24h clock */
+ rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
+ rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
+
+ /* disable write */
+ rtc_write(RTC_STAT_REG_ADDR,
+ rtc_read(RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_WRTC);
+}
+
+void rtc_reset (void)
+{
+}
+
+/*
+ * Helper functions
+ */
+
+static uchar rtc_read (uchar reg)
+{
+ return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+}
+
+static void rtc_write (uchar reg, uchar val)
+{
+ i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+}
+
+static unsigned bcd2bin (uchar n)
+{
+ return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
+}
+
+static unsigned char bin2bcd (unsigned int n)
+{
+ return (((n / 10) << 4) | (n % 10));
+}
diff --git a/drivers/rtc/m41t11.c b/drivers/rtc/m41t11.c
index 81da33a..fce00d9 100644
--- a/drivers/rtc/m41t11.c
+++ b/drivers/rtc/m41t11.c
@@ -96,14 +96,16 @@
#define M41T11_STORAGE_SZ (64-REG_CNT)
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
+ int rel = 0;
uchar data[RTC_REG_CNT];
i2c_read(CFG_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, data, RTC_REG_CNT);
if( data[RTC_SEC_ADDR] & 0x80 ){
printf( "m41t11 RTC Clock stopped!!!\n" );
+ rel = -1;
}
tmp->tm_sec = bcd2bin (data[RTC_SEC_ADDR] & 0x7F);
tmp->tm_min = bcd2bin (data[RTC_MIN_ADDR] & 0x7F);
@@ -120,6 +122,7 @@
i2c_read(CFG_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, ¢, M41T11_YEAR_SIZE);
if( !(data[RTC_HOUR_ADDR] & 0x80) ){
printf( "m41t11 RTC: cann't keep track of years without CEB set\n" );
+ rel = -1;
}
if( (cent & 0x1) != ((data[RTC_HOUR_ADDR]&0x40)>>7) ){
/*century flip store off new year*/
@@ -136,6 +139,8 @@
debug ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return rel;
}
void rtc_set (struct rtc_time *tmp)
diff --git a/drivers/rtc/m41t60.c b/drivers/rtc/m41t60.c
index 7c80143..8a32ea0 100644
--- a/drivers/rtc/m41t60.c
+++ b/drivers/rtc/m41t60.c
@@ -170,12 +170,12 @@
return data;
}
-void rtc_get(struct rtc_time *tmp)
+int rtc_get(struct rtc_time *tmp)
{
uchar const *const data = rtc_validate();
if (!data)
- return;
+ return -1;
tmp->tm_sec = bcd2bin(data[RTC_SEC] & 0x7F);
tmp->tm_min = bcd2bin(data[RTC_MIN] & 0x7F);
@@ -190,6 +190,8 @@
debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return 0;
}
void rtc_set(struct rtc_time *tmp)
diff --git a/drivers/rtc/m41t62.c b/drivers/rtc/m41t62.c
new file mode 100644
index 0000000..cf2a957
--- /dev/null
+++ b/drivers/rtc/m41t62.c
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * based on a the Linux rtc-m41t80.c driver which is:
+ * Alexander Bigga <ab@mycable.de>, 2006 (c) mycable GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Date & Time support for STMicroelectronics M41T62
+ */
+
+/* #define DEBUG */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+#include <i2c.h>
+#include <bcd.h>
+
+#if defined(CONFIG_CMD_DATE)
+
+#define M41T62_REG_SSEC 0
+#define M41T62_REG_SEC 1
+#define M41T62_REG_MIN 2
+#define M41T62_REG_HOUR 3
+#define M41T62_REG_WDAY 4
+#define M41T62_REG_DAY 5
+#define M41T62_REG_MON 6
+#define M41T62_REG_YEAR 7
+#define M41T62_REG_ALARM_MON 0xa
+#define M41T62_REG_ALARM_DAY 0xb
+#define M41T62_REG_ALARM_HOUR 0xc
+#define M41T62_REG_ALARM_MIN 0xd
+#define M41T62_REG_ALARM_SEC 0xe
+#define M41T62_REG_FLAGS 0xf
+
+#define M41T62_DATETIME_REG_SIZE (M41T62_REG_YEAR + 1)
+#define M41T62_ALARM_REG_SIZE \
+ (M41T62_REG_ALARM_SEC + 1 - M41T62_REG_ALARM_MON)
+
+#define M41T62_SEC_ST (1 << 7) /* ST: Stop Bit */
+#define M41T62_ALMON_AFE (1 << 7) /* AFE: AF Enable Bit */
+#define M41T62_ALMON_SQWE (1 << 6) /* SQWE: SQW Enable Bit */
+#define M41T62_ALHOUR_HT (1 << 6) /* HT: Halt Update Bit */
+#define M41T62_FLAGS_AF (1 << 6) /* AF: Alarm Flag Bit */
+#define M41T62_FLAGS_BATT_LOW (1 << 4) /* BL: Battery Low Bit */
+
+#define M41T62_FEATURE_HT (1 << 0)
+#define M41T62_FEATURE_BL (1 << 1)
+
+int rtc_get(struct rtc_time *tm)
+{
+ u8 buf[M41T62_DATETIME_REG_SIZE];
+
+ i2c_read(CFG_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
+
+ debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
+ "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
+ __FUNCTION__,
+ buf[0], buf[1], buf[2], buf[3],
+ buf[4], buf[5], buf[6], buf[7]);
+
+ tm->tm_sec = BCD2BIN(buf[M41T62_REG_SEC] & 0x7f);
+ tm->tm_min = BCD2BIN(buf[M41T62_REG_MIN] & 0x7f);
+ tm->tm_hour = BCD2BIN(buf[M41T62_REG_HOUR] & 0x3f);
+ tm->tm_mday = BCD2BIN(buf[M41T62_REG_DAY] & 0x3f);
+ tm->tm_wday = buf[M41T62_REG_WDAY] & 0x07;
+ tm->tm_mon = BCD2BIN(buf[M41T62_REG_MON] & 0x1f) - 1;
+
+ /* assume 20YY not 19YY, and ignore the Century Bit */
+ /* U-Boot needs to add 1900 here */
+ tm->tm_year = BCD2BIN(buf[M41T62_REG_YEAR]) + 100 + 1900;
+
+ debug("%s: tm is secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __FUNCTION__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ return 0;
+}
+
+void rtc_set(struct rtc_time *tm)
+{
+ u8 buf[M41T62_DATETIME_REG_SIZE];
+
+ debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+ i2c_read(CFG_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
+
+ /* Merge time-data and register flags into buf[0..7] */
+ buf[M41T62_REG_SSEC] = 0;
+ buf[M41T62_REG_SEC] =
+ BIN2BCD(tm->tm_sec) | (buf[M41T62_REG_SEC] & ~0x7f);
+ buf[M41T62_REG_MIN] =
+ BIN2BCD(tm->tm_min) | (buf[M41T62_REG_MIN] & ~0x7f);
+ buf[M41T62_REG_HOUR] =
+ BIN2BCD(tm->tm_hour) | (buf[M41T62_REG_HOUR] & ~0x3f) ;
+ buf[M41T62_REG_WDAY] =
+ (tm->tm_wday & 0x07) | (buf[M41T62_REG_WDAY] & ~0x07);
+ buf[M41T62_REG_DAY] =
+ BIN2BCD(tm->tm_mday) | (buf[M41T62_REG_DAY] & ~0x3f);
+ buf[M41T62_REG_MON] =
+ BIN2BCD(tm->tm_mon + 1) | (buf[M41T62_REG_MON] & ~0x1f);
+ /* assume 20YY not 19YY */
+ buf[M41T62_REG_YEAR] = BIN2BCD(tm->tm_year % 100);
+
+ if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE))
+ printf("I2C write failed in %s()\n", __func__);
+}
+
+void rtc_reset(void)
+{
+ /*
+ * Nothing to do
+ */
+}
+
+#endif
diff --git a/drivers/rtc/m48t35ax.c b/drivers/rtc/m48t35ax.c
index 0a0ffa8..be29279 100644
--- a/drivers/rtc/m48t35ax.c
+++ b/drivers/rtc/m48t35ax.c
@@ -42,7 +42,7 @@
/* ------------------------------------------------------------------------- */
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
uchar sec, min, hour, cent_day, date, month, year;
uchar ccr; /* Clock control register */
@@ -83,6 +83,8 @@
debug ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return 0;
}
void rtc_set (struct rtc_time *tmp)
diff --git a/drivers/rtc/max6900.c b/drivers/rtc/max6900.c
index c75a8e0..e9979f2 100644
--- a/drivers/rtc/max6900.c
+++ b/drivers/rtc/max6900.c
@@ -63,7 +63,7 @@
/* ------------------------------------------------------------------------- */
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
uchar sec, min, hour, mday, wday, mon, cent, year;
int retry = 1;
@@ -103,6 +103,8 @@
debug ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return 0;
}
void rtc_set (struct rtc_time *tmp)
diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c
index ab377ed..70f7017 100644
--- a/drivers/rtc/mc146818.c
+++ b/drivers/rtc/mc146818.c
@@ -57,7 +57,7 @@
/* ------------------------------------------------------------------------- */
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
uchar sec, min, hour, mday, wday, mon, year;
/* here check if rtc can be accessed */
@@ -101,6 +101,8 @@
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
#endif
+
+ return 0;
}
void rtc_set (struct rtc_time *tmp)
diff --git a/drivers/rtc/mcfrtc.c b/drivers/rtc/mcfrtc.c
index 27386e5..d235d10 100644
--- a/drivers/rtc/mcfrtc.c
+++ b/drivers/rtc/mcfrtc.c
@@ -39,7 +39,7 @@
#define isleap(y) ((((y) % 4) == 0 && ((y) % 100) != 0) || ((y) % 400) == 0)
#define STARTOFTIME 1970
-void rtc_get(struct rtc_time *tmp)
+int rtc_get(struct rtc_time *tmp)
{
volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE);
@@ -64,6 +64,8 @@
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
#endif
+
+ return 0;
}
void rtc_set(struct rtc_time *tmp)
diff --git a/drivers/rtc/mk48t59.c b/drivers/rtc/mk48t59.c
index bacdb5b..5981399 100644
--- a/drivers/rtc/mk48t59.c
+++ b/drivers/rtc/mk48t59.c
@@ -135,7 +135,7 @@
/* ------------------------------------------------------------------------- */
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
uchar save_ctrl_a;
uchar sec, min, hour, mday, wday, mon, year;
@@ -183,6 +183,8 @@
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
#endif
+
+ return 0;
}
void rtc_set (struct rtc_time *tmp)
diff --git a/drivers/rtc/mpc5xxx.c b/drivers/rtc/mpc5xxx.c
index 216386a..a6555f5 100644
--- a/drivers/rtc/mpc5xxx.c
+++ b/drivers/rtc/mpc5xxx.c
@@ -55,7 +55,7 @@
/*****************************************************************************
* get time
*****************************************************************************/
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
RTC5200 *rtc = (RTC5200 *) (CFG_MBAR+0x800);
ulong time, date, time2;
@@ -81,6 +81,8 @@
debug ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return 0;
}
/*****************************************************************************
diff --git a/drivers/rtc/mpc8xx.c b/drivers/rtc/mpc8xx.c
index 8d10c0e..057547b 100644
--- a/drivers/rtc/mpc8xx.c
+++ b/drivers/rtc/mpc8xx.c
@@ -35,7 +35,7 @@
/* ------------------------------------------------------------------------- */
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
volatile immap_t *immr = (immap_t *)CFG_IMMR;
ulong tim;
@@ -47,6 +47,8 @@
debug ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return 0;
}
void rtc_set (struct rtc_time *tmp)
diff --git a/drivers/rtc/pcf8563.c b/drivers/rtc/pcf8563.c
index 2d73d5d..c384975 100644
--- a/drivers/rtc/pcf8563.c
+++ b/drivers/rtc/pcf8563.c
@@ -41,8 +41,9 @@
/* ------------------------------------------------------------------------- */
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
+ int rel = 0;
uchar sec, min, hour, mday, wday, mon_cent, year;
sec = rtc_read (0x02);
@@ -65,6 +66,7 @@
if (sec & 0x80) {
puts ("### Warning: RTC Low Voltage - date/time not reliable\n");
+ rel = -1;
}
tmp->tm_sec = bcd2bin (sec & 0x7F);
@@ -80,6 +82,8 @@
debug ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return rel;
}
void rtc_set (struct rtc_time *tmp)
diff --git a/drivers/rtc/rs5c372.c b/drivers/rtc/rs5c372.c
index 3d1346e..1c9b752 100644
--- a/drivers/rtc/rs5c372.c
+++ b/drivers/rtc/rs5c372.c
@@ -166,7 +166,7 @@
/*
* Get the current time from the RTC
*/
-void
+int
rtc_get (struct rtc_time *tmp)
{
unsigned char buf[RS5C372_RAM_SIZE];
@@ -176,7 +176,7 @@
rs5c372_enable();
if (!setup_done)
- return;
+ return -1;
memset(buf, 0, sizeof(buf));
@@ -184,12 +184,12 @@
ret = rs5c372_readram(buf, RS5C372_RAM_SIZE);
if (ret != 0) {
printf("%s: failed\n", __FUNCTION__);
- return;
+ return -1;
}
rs5c372_convert_to_time(tmp, buf);
- return;
+ return 0;
}
/*
diff --git a/drivers/rtc/rx8025.c b/drivers/rtc/rx8025.c
index 9122f12..64eafe5 100644
--- a/drivers/rtc/rx8025.c
+++ b/drivers/rtc/rx8025.c
@@ -96,8 +96,9 @@
/*
* Get the current time from the RTC
*/
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
+ int rel = 0;
uchar sec, min, hour, mday, wday, mon, year, ctl2;
uchar buf[16];
@@ -118,14 +119,20 @@
/* dump status */
ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
- if (ctl2 & RTC_CTL2_BIT_PON)
+ if (ctl2 & RTC_CTL2_BIT_PON) {
printf("RTC: power-on detected\n");
+ rel = -1;
+ }
- if (ctl2 & RTC_CTL2_BIT_VDET)
+ if (ctl2 & RTC_CTL2_BIT_VDET) {
printf("RTC: voltage drop detected\n");
+ rel = -1;
+ }
- if (!(ctl2 & RTC_CTL2_BIT_XST))
+ if (!(ctl2 & RTC_CTL2_BIT_XST)) {
printf("RTC: oscillator stop detected\n");
+ rel = -1;
+ }
tmp->tm_sec = bcd2bin (sec & 0x7F);
tmp->tm_min = bcd2bin (min & 0x7F);
@@ -140,6 +147,8 @@
DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return rel;
}
/*
diff --git a/drivers/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c
index 7f8b4fa..358aef7 100644
--- a/drivers/rtc/s3c24x0_rtc.c
+++ b/drivers/rtc/s3c24x0_rtc.c
@@ -70,7 +70,7 @@
/* ------------------------------------------------------------------------- */
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
{
S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
uchar sec, min, hour, mday, wday, mon, year;
@@ -131,6 +131,8 @@
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
#endif
+
+ return 0;
}
void rtc_set (struct rtc_time *tmp)
diff --git a/drivers/rtc/x1205.c b/drivers/rtc/x1205.c
index 319f051..0e18139 100644
--- a/drivers/rtc/x1205.c
+++ b/drivers/rtc/x1205.c
@@ -104,7 +104,7 @@
* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
* Epoch is initialized as 2000. Time is set to UTC.
*/
-void rtc_get(struct rtc_time *tm)
+int rtc_get(struct rtc_time *tm)
{
u8 buf[8];
@@ -130,6 +130,8 @@
__FUNCTION__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ return 0;
}
void rtc_set(struct rtc_time *tm)
diff --git a/drivers/usb/usb_ohci.c b/drivers/usb/usb_ohci.c
index fb4726f..829bbca 100644
--- a/drivers/usb/usb_ohci.c
+++ b/drivers/usb/usb_ohci.c
@@ -68,7 +68,8 @@
defined(CONFIG_S3C2410) || \
defined(CONFIG_440EP) || \
defined(CONFIG_PCI_OHCI) || \
- defined(CONFIG_MPC5200)
+ defined(CONFIG_MPC5200) || \
+ defined(CFG_OHCI_USE_NPS)
# define OHCI_USE_NPS /* force NoPowerSwitching mode */
#endif
@@ -415,7 +416,7 @@
ep_print_int_eds (controller, "hcca");
dbg ("hcca frame #%04x", controller->hcca->frame_no);
ohci_dump_roothub (controller, 1);
-
+}
#endif /* DEBUG */
/*-------------------------------------------------------------------------*
diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c
index bfb057f..9684cf3 100644
--- a/drivers/video/mb862xx.c
+++ b/drivers/video/mb862xx.c
@@ -36,6 +36,9 @@
#include "videomodes.h"
#include <mb862xx.h>
+#if defined(CONFIG_POST)
+#include <post.h>
+#endif
/*
* Graphic Device
*/
@@ -354,7 +357,7 @@
board_disp_init();
#endif
-#if defined(CONFIG_LWMON5)
+#if defined(CONFIG_LWMON5) && !(CONFIG_POST & CFG_POST_SYSMON)
/* Lamp on */
board_backlight_switch (1);
#endif
diff --git a/fs/cramfs/uncompress.c b/fs/cramfs/uncompress.c
index e4189e5..cf67967 100644
--- a/fs/cramfs/uncompress.c
+++ b/fs/cramfs/uncompress.c
@@ -25,7 +25,7 @@
#include <watchdog.h>
#include <zlib.h>
-#if defined(CONFIG_CMD_JFFS2)
+#if defined(CONFIG_CMD_CRAMFS)
static z_stream stream;
diff --git a/include/405_mal.h b/include/405_mal.h
index 7ea4eb1..1415cbe 100644
--- a/include/405_mal.h
+++ b/include/405_mal.h
@@ -94,6 +94,7 @@
/* Mal IER */
#if defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
#define MAL_IER_PT 0x00000080
#define MAL_IER_PRE 0x00000040
diff --git a/include/4xx_i2c.h b/include/4xx_i2c.h
index 7c79bd1..2df4fbd 100644
--- a/include/4xx_i2c.h
+++ b/include/4xx_i2c.h
@@ -41,7 +41,8 @@
#endif /* CONFIG_I2C_MULTI_BUS */
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700 + I2C_BUS_OFFS)
#elif defined(CONFIG_440) || defined(CONFIG_405EX)
/* all remaining 440 variants */
diff --git a/include/asm-arm/global_data.h b/include/asm-arm/global_data.h
index c2d5291..0410b5e 100644
--- a/include/asm-arm/global_data.h
+++ b/include/asm-arm/global_data.h
@@ -60,6 +60,7 @@
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8")
diff --git a/include/asm-avr32/global_data.h b/include/asm-avr32/global_data.h
index 681c514..daf64bc 100644
--- a/include/asm-avr32/global_data.h
+++ b/include/asm-avr32/global_data.h
@@ -51,6 +51,7 @@
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm("r5")
diff --git a/include/asm-blackfin/global_data.h b/include/asm-blackfin/global_data.h
index cb0dfc2..6debfc7 100644
--- a/include/asm-blackfin/global_data.h
+++ b/include/asm-blackfin/global_data.h
@@ -61,6 +61,7 @@
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#define DECLARE_GLOBAL_DATA_PTR register gd_t * volatile gd asm ("P5")
diff --git a/include/asm-i386/global_data.h b/include/asm-i386/global_data.h
index 1d309d5..68a9ad6 100644
--- a/include/asm-i386/global_data.h
+++ b/include/asm-i386/global_data.h
@@ -54,6 +54,7 @@
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
extern gd_t *global_data;
diff --git a/include/asm-m68k/global_data.h b/include/asm-m68k/global_data.h
index 1e26eb0..958736e 100644
--- a/include/asm-m68k/global_data.h
+++ b/include/asm-m68k/global_data.h
@@ -68,6 +68,7 @@
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#if 0
extern gd_t *global_data;
diff --git a/include/asm-microblaze/global_data.h b/include/asm-microblaze/global_data.h
index a6e7834..91243b2 100644
--- a/include/asm-microblaze/global_data.h
+++ b/include/asm-microblaze/global_data.h
@@ -52,6 +52,7 @@
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r31")
diff --git a/include/asm-mips/asm.h b/include/asm-mips/asm.h
new file mode 100644
index 0000000..608cfcf
--- /dev/null
+++ b/include/asm-mips/asm.h
@@ -0,0 +1,409 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle
+ * Copyright (C) 1999 by Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2002 Maciej W. Rozycki
+ *
+ * Some useful macros for MIPS assembler code
+ *
+ * Some of the routines below contain useless nops that will be optimized
+ * away by gas in -O mode. These nops are however required to fill delay
+ * slots in noreorder mode.
+ */
+#ifndef __ASM_ASM_H
+#define __ASM_ASM_H
+
+#include <asm/sgidefs.h>
+
+#ifndef CAT
+#ifdef __STDC__
+#define __CAT(str1, str2) str1##str2
+#else
+#define __CAT(str1, str2) str1/**/str2
+#endif
+#define CAT(str1, str2) __CAT(str1, str2)
+#endif
+
+/*
+ * PIC specific declarations
+ * Not used for the kernel but here seems to be the right place.
+ */
+#ifdef __PIC__
+#define CPRESTORE(register) \
+ .cprestore register
+#define CPADD(register) \
+ .cpadd register
+#define CPLOAD(register) \
+ .cpload register
+#else
+#define CPRESTORE(register)
+#define CPADD(register)
+#define CPLOAD(register)
+#endif
+
+/*
+ * LEAF - declare leaf routine
+ */
+#define LEAF(symbol) \
+ .globl symbol; \
+ .align 2; \
+ .type symbol, @function; \
+ .ent symbol, 0; \
+symbol: .frame sp, 0, ra
+
+/*
+ * NESTED - declare nested routine entry point
+ */
+#define NESTED(symbol, framesize, rpc) \
+ .globl symbol; \
+ .align 2; \
+ .type symbol, @function; \
+ .ent symbol, 0; \
+symbol: .frame sp, framesize, rpc
+
+/*
+ * END - mark end of function
+ */
+#define END(function) \
+ .end function; \
+ .size function, .-function
+
+/*
+ * EXPORT - export definition of symbol
+ */
+#define EXPORT(symbol) \
+ .globl symbol; \
+symbol:
+
+/*
+ * FEXPORT - export definition of a function symbol
+ */
+#define FEXPORT(symbol) \
+ .globl symbol; \
+ .type symbol, @function; \
+symbol:
+
+/*
+ * ABS - export absolute symbol
+ */
+#define ABS(symbol,value) \
+ .globl symbol; \
+symbol = value
+
+#define PANIC(msg) \
+ .set push; \
+ .set reorder; \
+ PTR_LA a0, 8f; \
+ jal panic; \
+9: b 9b; \
+ .set pop; \
+ TEXT(msg)
+
+/*
+ * Print formatted string
+ */
+#ifdef CONFIG_PRINTK
+#define PRINT(string) \
+ .set push; \
+ .set reorder; \
+ PTR_LA a0, 8f; \
+ jal printk; \
+ .set pop; \
+ TEXT(string)
+#else
+#define PRINT(string)
+#endif
+
+#define TEXT(msg) \
+ .pushsection .data; \
+8: .asciiz msg; \
+ .popsection;
+
+/*
+ * Build text tables
+ */
+#define TTABLE(string) \
+ .pushsection .text; \
+ .word 1f; \
+ .popsection \
+ .pushsection .data; \
+1: .asciiz string; \
+ .popsection
+
+/*
+ * MIPS IV pref instruction.
+ * Use with .set noreorder only!
+ *
+ * MIPS IV implementations are free to treat this as a nop. The R5000
+ * is one of them. So we should have an option not to use this instruction.
+ */
+#ifdef CONFIG_CPU_HAS_PREFETCH
+
+#define PREF(hint,addr) \
+ .set push; \
+ .set mips4; \
+ pref hint, addr; \
+ .set pop
+
+#define PREFX(hint,addr) \
+ .set push; \
+ .set mips4; \
+ prefx hint, addr; \
+ .set pop
+
+#else /* !CONFIG_CPU_HAS_PREFETCH */
+
+#define PREF(hint, addr)
+#define PREFX(hint, addr)
+
+#endif /* !CONFIG_CPU_HAS_PREFETCH */
+
+/*
+ * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs.
+ */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1)
+#define MOVN(rd, rs, rt) \
+ .set push; \
+ .set reorder; \
+ beqz rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#define MOVZ(rd, rs, rt) \
+ .set push; \
+ .set reorder; \
+ bnez rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3)
+#define MOVN(rd, rs, rt) \
+ .set push; \
+ .set noreorder; \
+ bnezl rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#define MOVZ(rd, rs, rt) \
+ .set push; \
+ .set noreorder; \
+ beqzl rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \
+ (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64)
+#define MOVN(rd, rs, rt) \
+ movn rd, rs, rt
+#define MOVZ(rd, rs, rt) \
+ movz rd, rs, rt
+#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */
+
+/*
+ * Stack alignment
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define ALSZ 7
+#define ALMASK ~7
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define ALSZ 15
+#define ALMASK ~15
+#endif
+
+/*
+ * Macros to handle different pointer/register sizes for 32/64-bit code
+ */
+
+/*
+ * Size of a register
+ */
+#ifdef __mips64
+#define SZREG 8
+#else
+#define SZREG 4
+#endif
+
+/*
+ * Use the following macros in assemblercode to load/store registers,
+ * pointers etc.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define REG_S sw
+#define REG_L lw
+#define REG_SUBU subu
+#define REG_ADDU addu
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define REG_S sd
+#define REG_L ld
+#define REG_SUBU dsubu
+#define REG_ADDU daddu
+#endif
+
+/*
+ * How to add/sub/load/store/shift C int variables.
+ */
+#if (_MIPS_SZINT == 32)
+#define INT_ADD add
+#define INT_ADDU addu
+#define INT_ADDI addi
+#define INT_ADDIU addiu
+#define INT_SUB sub
+#define INT_SUBU subu
+#define INT_L lw
+#define INT_S sw
+#define INT_SLL sll
+#define INT_SLLV sllv
+#define INT_SRL srl
+#define INT_SRLV srlv
+#define INT_SRA sra
+#define INT_SRAV srav
+#endif
+
+#if (_MIPS_SZINT == 64)
+#define INT_ADD dadd
+#define INT_ADDU daddu
+#define INT_ADDI daddi
+#define INT_ADDIU daddiu
+#define INT_SUB dsub
+#define INT_SUBU dsubu
+#define INT_L ld
+#define INT_S sd
+#define INT_SLL dsll
+#define INT_SLLV dsllv
+#define INT_SRL dsrl
+#define INT_SRLV dsrlv
+#define INT_SRA dsra
+#define INT_SRAV dsrav
+#endif
+
+/*
+ * How to add/sub/load/store/shift C long variables.
+ */
+#if (_MIPS_SZLONG == 32)
+#define LONG_ADD add
+#define LONG_ADDU addu
+#define LONG_ADDI addi
+#define LONG_ADDIU addiu
+#define LONG_SUB sub
+#define LONG_SUBU subu
+#define LONG_L lw
+#define LONG_S sw
+#define LONG_SLL sll
+#define LONG_SLLV sllv
+#define LONG_SRL srl
+#define LONG_SRLV srlv
+#define LONG_SRA sra
+#define LONG_SRAV srav
+
+#define LONG .word
+#define LONGSIZE 4
+#define LONGMASK 3
+#define LONGLOG 2
+#endif
+
+#if (_MIPS_SZLONG == 64)
+#define LONG_ADD dadd
+#define LONG_ADDU daddu
+#define LONG_ADDI daddi
+#define LONG_ADDIU daddiu
+#define LONG_SUB dsub
+#define LONG_SUBU dsubu
+#define LONG_L ld
+#define LONG_S sd
+#define LONG_SLL dsll
+#define LONG_SLLV dsllv
+#define LONG_SRL dsrl
+#define LONG_SRLV dsrlv
+#define LONG_SRA dsra
+#define LONG_SRAV dsrav
+
+#define LONG .dword
+#define LONGSIZE 8
+#define LONGMASK 7
+#define LONGLOG 3
+#endif
+
+/*
+ * How to add/sub/load/store/shift pointers.
+ */
+#if (_MIPS_SZPTR == 32)
+#define PTR_ADD add
+#define PTR_ADDU addu
+#define PTR_ADDI addi
+#define PTR_ADDIU addiu
+#define PTR_SUB sub
+#define PTR_SUBU subu
+#define PTR_L lw
+#define PTR_S sw
+#define PTR_LA la
+#define PTR_LI li
+#define PTR_SLL sll
+#define PTR_SLLV sllv
+#define PTR_SRL srl
+#define PTR_SRLV srlv
+#define PTR_SRA sra
+#define PTR_SRAV srav
+
+#define PTR_SCALESHIFT 2
+
+#define PTR .word
+#define PTRSIZE 4
+#define PTRLOG 2
+#endif
+
+#if (_MIPS_SZPTR == 64)
+#define PTR_ADD dadd
+#define PTR_ADDU daddu
+#define PTR_ADDI daddi
+#define PTR_ADDIU daddiu
+#define PTR_SUB dsub
+#define PTR_SUBU dsubu
+#define PTR_L ld
+#define PTR_S sd
+#define PTR_LA dla
+#define PTR_LI dli
+#define PTR_SLL dsll
+#define PTR_SLLV dsllv
+#define PTR_SRL dsrl
+#define PTR_SRLV dsrlv
+#define PTR_SRA dsra
+#define PTR_SRAV dsrav
+
+#define PTR_SCALESHIFT 3
+
+#define PTR .dword
+#define PTRSIZE 8
+#define PTRLOG 3
+#endif
+
+/*
+ * Some cp0 registers were extended to 64bit for MIPS III.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define MFC0 mfc0
+#define MTC0 mtc0
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define MFC0 dmfc0
+#define MTC0 dmtc0
+#endif
+
+#define SSNOP sll zero, zero, 1
+
+#ifdef CONFIG_SGI_IP28
+/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */
+#include <asm/cacheops.h>
+#define R10KCBARRIER(addr) cache Cache_Barrier, addr;
+#else
+#define R10KCBARRIER(addr)
+#endif
+
+#endif /* __ASM_ASM_H */
diff --git a/include/asm-mips/byteorder.h b/include/asm-mips/byteorder.h
index b9604cf..b5e685f 100644
--- a/include/asm-mips/byteorder.h
+++ b/include/asm-mips/byteorder.h
@@ -1,18 +1,62 @@
-/* $Id: byteorder.h,v 1.8 1998/11/02 09:29:32 ralf Exp $
- *
+/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) by Ralf Baechle
+ * Copyright (C) 1996, 99, 2003 by Ralf Baechle
*/
-#ifndef _MIPS_BYTEORDER_H
-#define _MIPS_BYTEORDER_H
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
#include <asm/types.h>
#ifdef __GNUC__
+#ifdef CONFIG_CPU_MIPSR2
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
+{
+ __asm__(
+ " wsbh %0, %1 \n"
+ : "=r" (x)
+ : "r" (x));
+
+ return x;
+}
+#define __arch__swab16(x) ___arch__swab16(x)
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+ __asm__(
+ " wsbh %0, %1 \n"
+ " rotr %0, %0, 16 \n"
+ : "=r" (x)
+ : "r" (x));
+
+ return x;
+}
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#ifdef CONFIG_CPU_MIPS64_R2
+
+static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
+{
+ __asm__(
+ " dsbh %0, %1 \n"
+ " dshd %0, %0 \n"
+ " drotr %0, %0, 32 \n"
+ : "=r" (x)
+ : "r" (x));
+
+ return x;
+}
+
+#define __arch__swab64(x) ___arch__swab64(x)
+
+#endif /* CONFIG_CPU_MIPS64_R2 */
+
+#endif /* CONFIG_CPU_MIPSR2 */
+
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __BYTEORDER_HAS_U64__
# define __SWAB_64_THRU_32__
@@ -20,12 +64,12 @@
#endif /* __GNUC__ */
-#if defined (__MIPSEB__)
+#if defined(__MIPSEB__)
# include <linux/byteorder/big_endian.h>
-#elif defined (__MIPSEL__)
+#elif defined(__MIPSEL__)
# include <linux/byteorder/little_endian.h>
#else
# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
#endif
-#endif /* _MIPS_BYTEORDER_H */
+#endif /* _ASM_BYTEORDER_H */
diff --git a/include/asm-mips/cachectl.h b/include/asm-mips/cachectl.h
index 9cc2b87..f3ce721 100644
--- a/include/asm-mips/cachectl.h
+++ b/include/asm-mips/cachectl.h
@@ -1,10 +1,12 @@
/*
- * cachectl.h -- defines for MIPS cache control system calls
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*
* Copyright (C) 1994, 1995, 1996 by Ralf Baechle
*/
-#ifndef __ASM_MIPS_CACHECTL
-#define __ASM_MIPS_CACHECTL
+#ifndef _ASM_CACHECTL
+#define _ASM_CACHECTL
/*
* Options for cacheflush system call
@@ -21,4 +23,4 @@
#define CACHEABLE 0 /* make pages cacheable */
#define UNCACHEABLE 1 /* make pages uncacheable */
-#endif /* __ASM_MIPS_CACHECTL */
+#endif /* _ASM_CACHECTL */
diff --git a/include/asm-mips/cacheops.h b/include/asm-mips/cacheops.h
index 66b0b36..256ad2c 100644
--- a/include/asm-mips/cacheops.h
+++ b/include/asm-mips/cacheops.h
@@ -5,43 +5,81 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * (C) Copyright 1996, 1997 by Ralf Baechle
+ * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle
+ * (C) Copyright 1999 Silicon Graphics, Inc.
*/
-#ifndef __ASM_MIPS_CACHEOPS_H
-#define __ASM_MIPS_CACHEOPS_H
+#ifndef __ASM_CACHEOPS_H
+#define __ASM_CACHEOPS_H
/*
- * Cache Operations
+ * Cache Operations available on all MIPS processors with R4000-style caches
*/
#define Index_Invalidate_I 0x00
#define Index_Writeback_Inv_D 0x01
-#define Index_Invalidate_SI 0x02
-#define Index_Writeback_Inv_SD 0x03
#define Index_Load_Tag_I 0x04
#define Index_Load_Tag_D 0x05
-#define Index_Load_Tag_SI 0x06
-#define Index_Load_Tag_SD 0x07
#define Index_Store_Tag_I 0x08
#define Index_Store_Tag_D 0x09
-#define Index_Store_Tag_SI 0x0A
-#define Index_Store_Tag_SD 0x0B
-#define Create_Dirty_Excl_D 0x0d
-#define Create_Dirty_Excl_SD 0x0f
+#if defined(CONFIG_CPU_LOONGSON2)
+#define Hit_Invalidate_I 0x00
+#else
#define Hit_Invalidate_I 0x10
+#endif
#define Hit_Invalidate_D 0x11
-#define Hit_Invalidate_SI 0x12
-#define Hit_Invalidate_SD 0x13
-#define Fill 0x14
#define Hit_Writeback_Inv_D 0x15
- /* 0x16 is unused */
-#define Hit_Writeback_Inv_SD 0x17
+
+/*
+ * R4000-specific cacheops
+ */
+#define Create_Dirty_Excl_D 0x0d
+#define Fill 0x14
#define Hit_Writeback_I 0x18
#define Hit_Writeback_D 0x19
- /* 0x1a is unused */
+
+/*
+ * R4000SC and R4400SC-specific cacheops
+ */
+#define Index_Invalidate_SI 0x02
+#define Index_Writeback_Inv_SD 0x03
+#define Index_Load_Tag_SI 0x06
+#define Index_Load_Tag_SD 0x07
+#define Index_Store_Tag_SI 0x0A
+#define Index_Store_Tag_SD 0x0B
+#define Create_Dirty_Excl_SD 0x0f
+#define Hit_Invalidate_SI 0x12
+#define Hit_Invalidate_SD 0x13
+#define Hit_Writeback_Inv_SD 0x17
#define Hit_Writeback_SD 0x1b
- /* 0x1c is unused */
- /* 0x1e is unused */
#define Hit_Set_Virtual_SI 0x1e
#define Hit_Set_Virtual_SD 0x1f
-#endif /* __ASM_MIPS_CACHEOPS_H */
+/*
+ * R5000-specific cacheops
+ */
+#define R5K_Page_Invalidate_S 0x17
+
+/*
+ * RM7000-specific cacheops
+ */
+#define Page_Invalidate_T 0x16
+
+/*
+ * R10000-specific cacheops
+ *
+ * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
+ * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
+ */
+#define Index_Writeback_Inv_S 0x03
+#define Index_Load_Tag_S 0x07
+#define Index_Store_Tag_S 0x0B
+#define Hit_Invalidate_S 0x13
+#define Cache_Barrier 0x14
+#define Hit_Writeback_Inv_S 0x17
+#define Index_Load_Data_I 0x18
+#define Index_Load_Data_D 0x19
+#define Index_Load_Data_S 0x1b
+#define Index_Store_Data_I 0x1c
+#define Index_Store_Data_D 0x1d
+#define Index_Store_Data_S 0x1f
+
+#endif /* __ASM_CACHEOPS_H */
diff --git a/include/asm-mips/global_data.h b/include/asm-mips/global_data.h
index a024194..bd9e4dd 100644
--- a/include/asm-mips/global_data.h
+++ b/include/asm-mips/global_data.h
@@ -54,6 +54,7 @@
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("k0")
diff --git a/include/asm-mips/isadep.h b/include/asm-mips/isadep.h
index 3cd1eb8..24c6cda 100644
--- a/include/asm-mips/isadep.h
+++ b/include/asm-mips/isadep.h
@@ -1,16 +1,15 @@
/*
- * Various ISA level dependant constants.
+ * Various ISA level dependent constants.
* Most of the following constants reflect the different layout
* of Coprocessor 0 registers.
*
* Copyright (c) 1998 Harald Koerfgen
*/
-#include <linux/config.h>
#ifndef __ASM_ISADEP_H
#define __ASM_ISADEP_H
-#if defined(CONFIG_CPU_R3000)
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
/*
* R2000 or R3000
*/
diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h
index 6838aee..24858dd 100644
--- a/include/asm-mips/processor.h
+++ b/include/asm-mips/processor.h
@@ -4,9 +4,9 @@
* for more details.
*
* Copyright (C) 1994 Waldorf GMBH
- * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001 Ralf Baechle
+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle
* Copyright (C) 1996 Paul M. Antoine
- * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#ifndef _ASM_PROCESSOR_H
#define _ASM_PROCESSOR_H
@@ -15,92 +15,26 @@
#include <asm/isadep.h>
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#if !defined (_LANGUAGE_ASSEMBLY)
-#if 0
-#include <linux/threads.h>
-#endif
#include <asm/cachectl.h>
#include <asm/mipsregs.h>
#include <asm/reg.h>
#include <asm/system.h>
-struct mips_cpuinfo {
- unsigned long udelay_val;
- unsigned long *pgd_quick;
- unsigned long *pte_quick;
- unsigned long pgtable_cache_sz;
-};
+/*
+ * Return current * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
/*
* System setup and hardware flags..
- * XXX: Should go into mips_cpuinfo.
*/
-extern void (*cpu_wait)(void); /* only available on R4[26]00 and R3081 */
-extern void r3081_wait(void);
-extern void r4k_wait(void);
-extern char cyclecounter_available; /* only available from R4000 upwards. */
+extern void (*cpu_wait)(void);
-extern struct mips_cpuinfo boot_cpu_data;
extern unsigned int vced_count, vcei_count;
-#ifdef CONFIG_SMP
-extern struct mips_cpuinfo cpu_data[];
-#define current_cpu_data cpu_data[smp_processor_id()]
-#else
-#define cpu_data &boot_cpu_data
-#define current_cpu_data boot_cpu_data
-#endif
-
-/*
- * Bus types (default is ISA, but people can check others with these..)
- * MCA_bus hardcoded to 0 for now.
- *
- * This needs to be extended since MIPS systems are being delivered with
- * numerous different types of bus systems.
- */
-extern int EISA_bus;
-#define MCA_bus 0
-#define MCA_bus__is_a_macro /* for versions in ksyms.c */
-
-/*
- * MIPS has no problems with write protection
- */
-#define wp_works_ok 1
-#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
-
-/* Lazy FPU handling on uni-processor */
-extern struct task_struct *last_task_used_math;
-
-/*
- * User space process size: 2GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing. TASK_SIZE
- * for a 64 bit kernel expandable to 8192EB, of which the current MIPS
- * implementations will "only" be able to use 1TB ...
- */
-#define TASK_SIZE (0x7fff8000UL)
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
-
-/*
- * Size of io_bitmap in longwords: 32 is ports 0-0x3ff.
- */
-#define IO_BITMAP_SIZE 32
-
#define NUM_FPU_REGS 32
-struct mips_fpu_hard_struct {
- double fp_regs[NUM_FPU_REGS];
- unsigned int control;
-};
+typedef __u64 fpureg_t;
/*
* It would be nice to add some more fields for emulator statistics, but there
@@ -108,25 +42,29 @@
* be recalculated by hand. So the additional information will be private to
* the FPU emulator for now. See asm-mips/fpu_emulator.h.
*/
-typedef u64 fpureg_t;
-struct mips_fpu_soft_struct {
- fpureg_t regs[NUM_FPU_REGS];
- unsigned int sr;
+
+struct mips_fpu_struct {
+ fpureg_t fpr[NUM_FPU_REGS];
+ unsigned int fcr31;
};
-union mips_fpu_union {
- struct mips_fpu_hard_struct hard;
- struct mips_fpu_soft_struct soft;
-};
+#define NUM_DSP_REGS 6
-#define INIT_FPU { \
- {{0,},} \
-}
+typedef __u32 dspreg_t;
+
+struct mips_dsp_state {
+ dspreg_t dspr[NUM_DSP_REGS];
+ unsigned int dspcontrol;
+};
typedef struct {
unsigned long seg;
} mm_segment_t;
+#define ARCH_MIN_TASKALIGN 8
+
+struct mips_abi;
+
/*
* If you change thread_struct remember to change the #defines below too!
*/
@@ -140,131 +78,36 @@
unsigned long cp0_status;
/* Saved fpu/fpu emulator stuff. */
- union mips_fpu_union fpu;
+ struct mips_fpu_struct fpu;
+#ifdef CONFIG_MIPS_MT_FPAFF
+ /* Emulated instruction count */
+ unsigned long emulated_fp;
+ /* Saved per-thread scheduler affinity mask */
+ cpumask_t user_cpus_allowed;
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+ /* Saved state of the DSP ASE, if available. */
+ struct mips_dsp_state dsp;
/* Other stuff associated with the thread. */
unsigned long cp0_badvaddr; /* Last user fault */
unsigned long cp0_baduaddr; /* Last kernel fault accessing USEG */
unsigned long error_code;
unsigned long trap_no;
-#define MF_FIXADE 1 /* Fix address errors in software */
-#define MF_LOGADE 2 /* Log address errors to syslog */
- unsigned long mflags;
- mm_segment_t current_ds;
unsigned long irix_trampoline; /* Wheee... */
unsigned long irix_oldctx;
-
- /*
- * These are really only needed if the full FPU emulator is configured.
- * Would be made conditional on MIPS_FPU_EMULATOR if it weren't for the
- * fact that having offset.h rebuilt differently for different config
- * options would be asking for trouble.
- *
- * Saved EPC during delay-slot emulation (see math-emu/cp1emu.c)
- */
- unsigned long dsemul_epc;
-
- /*
- * Pointer to instruction used to induce address error
- */
- unsigned long dsemul_aerpc;
+ struct mips_abi *abi;
};
-#endif /* !defined (_LANGUAGE_ASSEMBLY) */
-
-#define INIT_THREAD { \
- /* \
- * saved main processor registers \
- */ \
- 0, 0, 0, 0, 0, 0, 0, 0, \
- 0, 0, 0, \
- /* \
- * saved cp0 stuff \
- */ \
- 0, \
- /* \
- * saved fpu/fpu emulator stuff \
- */ \
- INIT_FPU, \
- /* \
- * Other stuff associated with the process \
- */ \
- 0, 0, 0, 0, \
- /* \
- * For now the default is to fix address errors \
- */ \
- MF_FIXADE, { 0 }, 0, 0, \
- /* \
- * dsemul_epc and dsemul_aerpc should never be used uninitialized, \
- * but... \
- */ \
- 0 ,0 \
-}
-
-#ifdef __KERNEL__
-
-#define KERNEL_STACK_SIZE 8192
-
-#if !defined (_LANGUAGE_ASSEMBLY)
+struct task_struct;
/* Free all resources held by a thread. */
#define release_thread(thread) do { } while(0)
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while (0)
-/* Copy and release all segment info associated with a VM */
-#define copy_segments(p, mm) do { } while(0)
-#define release_segments(mm) do { } while(0)
-
-/*
- * Return saved PC of a blocked thread.
- */
-extern inline unsigned long thread_saved_pc(struct thread_struct *t)
-{
- extern void ret_from_fork(void);
-
- /* New born processes are a special case */
- if (t->reg31 == (unsigned long) ret_from_fork)
- return t->reg31;
-
- return ((unsigned long *)t->reg29)[10];
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define start_thread(regs, new_pc, new_sp) do { \
- /* New thread looses kernel privileges. */ \
- regs->cp0_status = (regs->cp0_status & ~(ST0_CU0|ST0_KSU)) | KU_USER;\
- regs->cp0_epc = new_pc; \
- regs->regs[29] = new_sp; \
- current->thread.current_ds = USER_DS; \
-} while (0)
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define __PT_REG(reg) ((long)&((struct pt_regs *)0)->reg - sizeof(struct pt_regs))
-#define __KSTK_TOS(tsk) ((unsigned long)(tsk) + KERNEL_STACK_SIZE - 32)
-#define KSTK_EIP(tsk) (*(unsigned long *)(__KSTK_TOS(tsk) + __PT_REG(cp0_epc)))
-#define KSTK_ESP(tsk) (*(unsigned long *)(__KSTK_TOS(tsk) + __PT_REG(regs[29])))
-
-/* Allocation and freeing of basic task resources. */
-/*
- * NOTE! The task struct and the stack go together
- */
-#define THREAD_SIZE (2*PAGE_SIZE)
-#define alloc_task_struct() \
- ((struct task_struct *) __get_free_pages(GFP_KERNEL,1))
-#define free_task_struct(p) free_pages((unsigned long)(p),1)
-#define get_task_struct(tsk) atomic_inc(&virt_to_page(tsk)->count)
-
-#define init_task (init_task_union.task)
-#define init_stack (init_task_union.stack)
-
-#define cpu_relax() do { } while (0)
-
-#endif /* !defined (_LANGUAGE_ASSEMBLY) */
-#endif /* __KERNEL__ */
+#define cpu_relax() barrier()
/*
* Return_address is a replacement for __builtin_return_address(count)
@@ -280,4 +123,20 @@
*/
#define return_address() ({__asm__ __volatile__("":::"$31");__builtin_return_address(0);})
+#ifdef CONFIG_CPU_HAS_PREFETCH
+
+#define ARCH_HAS_PREFETCH
+
+static inline void prefetch(const void *addr)
+{
+ __asm__ __volatile__(
+ " .set mips4 \n"
+ " pref %0, (%1) \n"
+ " .set mips0 \n"
+ :
+ : "i" (Pref_Load), "r" (addr));
+}
+
+#endif
+
#endif /* _ASM_PROCESSOR_H */
diff --git a/include/asm-mips/ptrace.h b/include/asm-mips/ptrace.h
index 2517adb..5659c0c 100644
--- a/include/asm-mips/ptrace.h
+++ b/include/asm-mips/ptrace.h
@@ -3,17 +3,12 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000 by Ralf Baechle
- *
- * Machine dependent structs and defines to help the user use
- * the ptrace system call.
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#ifndef _ASM_PTRACE_H
#define _ASM_PTRACE_H
-#include <asm/isadep.h>
-#include <linux/types.h>
-
/* 0 - 31 are integer registers, 32 - 63 are fp registers. */
#define FPR_BASE 32
#define PC 64
@@ -23,63 +18,69 @@
#define MMLO 68
#define FPC_CSR 69
#define FPC_EIR 70
+#define DSP_BASE 71 /* 3 more hi / lo register pairs */
+#define DSP_CONTROL 77
+#define ACX 78
-#ifndef _LANGUAGE_ASSEMBLY
/*
* This struct defines the way the registers are stored on the stack during a
* system call/exception. As usual the registers k0/k1 aren't being saved.
*/
struct pt_regs {
+#ifdef CONFIG_32BIT
/* Pad bytes for argument save space on the stack. */
unsigned long pad0[6];
+#endif
/* Saved main processor registers. */
unsigned long regs[32];
- /* Other saved registers. */
- unsigned long lo;
- unsigned long hi;
-
- /*
- * saved cp0 registers
- */
- unsigned long cp0_epc;
- unsigned long cp0_badvaddr;
+ /* Saved special registers. */
unsigned long cp0_status;
+ unsigned long hi;
+ unsigned long lo;
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+ unsigned long acx;
+#endif
+ unsigned long cp0_badvaddr;
unsigned long cp0_cause;
-};
-
-#endif /* !(_LANGUAGE_ASSEMBLY) */
+ unsigned long cp0_epc;
+#ifdef CONFIG_MIPS_MT_SMTC
+ unsigned long cp0_tcstatus;
+#endif /* CONFIG_MIPS_MT_SMTC */
+} __attribute__ ((aligned (8)));
/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-/* #define PTRACE_GETREGS 12 */
-/* #define PTRACE_SETREGS 13 */
-/* #define PTRACE_GETFPREGS 14 */
-/* #define PTRACE_SETFPREGS 15 */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
/* #define PTRACE_GETFPXREGS 18 */
/* #define PTRACE_SETFPXREGS 19 */
-#define PTRACE_SETOPTIONS 21
+#define PTRACE_OLDSETOPTIONS 21
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD 0x00000001
+#define PTRACE_GET_THREAD_AREA 25
+#define PTRACE_SET_THREAD_AREA 26
-#if 0 /* def _LANGUAGE_ASSEMBLY */
-#include <asm/offset.h>
-#endif
+/* Calls to trace a 64bit program from a 32bit program. */
+#define PTRACE_PEEKTEXT_3264 0xc0
+#define PTRACE_PEEKDATA_3264 0xc1
+#define PTRACE_POKETEXT_3264 0xc2
+#define PTRACE_POKEDATA_3264 0xc3
+#define PTRACE_GET_THREAD_AREA_3264 0xc4
#ifdef __KERNEL__
-#ifndef _LANGUAGE_ASSEMBLY
+#include <asm/isadep.h>
+
/*
* Does the process account for user or for system time?
*/
#define user_mode(regs) (((regs)->cp0_status & KU_MASK) == KU_USER)
#define instruction_pointer(regs) ((regs)->cp0_epc)
-
-extern void show_regs(struct pt_regs *);
-#endif /* !(_LANGUAGE_ASSEMBLY) */
+#define profile_pc(regs) instruction_pointer(regs)
#endif
diff --git a/include/asm-mips/reboot.h b/include/asm-mips/reboot.h
new file mode 100644
index 0000000..978d206
--- /dev/null
+++ b/include/asm-mips/reboot.h
@@ -0,0 +1,14 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 1999, 2001, 06 by Ralf Baechle
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_REBOOT_H
+#define _ASM_REBOOT_H
+
+extern void _machine_restart(void);
+
+#endif /* _ASM_REBOOT_H */
diff --git a/include/asm-mips/reg.h b/include/asm-mips/reg.h
index 35505b7..fc6bc0c 100644
--- a/include/asm-mips/reg.h
+++ b/include/asm-mips/reg.h
@@ -7,48 +7,50 @@
* for more details.
*
* Copyright (C) 1995, 1999 by Ralf Baechle
+ * Copyright (C) 1995, 1999 Silicon Graphics
*/
#ifndef __ASM_MIPS_REG_H
#define __ASM_MIPS_REG_H
-/*
- * This defines/structures correspond to the register layout on stack -
- * if the order here is changed, it needs to be updated in
- * include/asm-mips/stackframe.h
- */
-#define EF_REG0 6
-#define EF_REG1 7
-#define EF_REG2 8
-#define EF_REG3 9
-#define EF_REG4 10
-#define EF_REG5 11
-#define EF_REG6 12
-#define EF_REG7 13
-#define EF_REG8 14
-#define EF_REG9 15
-#define EF_REG10 16
-#define EF_REG11 17
-#define EF_REG12 18
-#define EF_REG13 19
-#define EF_REG14 20
-#define EF_REG15 21
-#define EF_REG16 22
-#define EF_REG17 23
-#define EF_REG18 24
-#define EF_REG19 25
-#define EF_REG20 26
-#define EF_REG21 27
-#define EF_REG22 28
-#define EF_REG23 29
-#define EF_REG24 30
-#define EF_REG25 31
+#if defined(CONFIG_32BIT) || defined(WANT_COMPAT_REG_H)
+
+#define EF_R0 6
+#define EF_R1 7
+#define EF_R2 8
+#define EF_R3 9
+#define EF_R4 10
+#define EF_R5 11
+#define EF_R6 12
+#define EF_R7 13
+#define EF_R8 14
+#define EF_R9 15
+#define EF_R10 16
+#define EF_R11 17
+#define EF_R12 18
+#define EF_R13 19
+#define EF_R14 20
+#define EF_R15 21
+#define EF_R16 22
+#define EF_R17 23
+#define EF_R18 24
+#define EF_R19 25
+#define EF_R20 26
+#define EF_R21 27
+#define EF_R22 28
+#define EF_R23 29
+#define EF_R24 30
+#define EF_R25 31
+
/*
* k0/k1 unsaved
*/
-#define EF_REG28 34
-#define EF_REG29 35
-#define EF_REG30 36
-#define EF_REG31 37
+#define EF_R26 32
+#define EF_R27 33
+
+#define EF_R28 34
+#define EF_R29 35
+#define EF_R30 36
+#define EF_R31 37
/*
* Saved special registers
@@ -59,8 +61,66 @@
#define EF_CP0_EPC 40
#define EF_CP0_BADVADDR 41
#define EF_CP0_STATUS 42
-#define EF_CP0_CAUSE 44
+#define EF_CP0_CAUSE 43
+#define EF_UNUSED0 44
-#define EF_SIZE 180 /* size in bytes */
+#define EF_SIZE 180
+
+#endif
+
+#ifdef CONFIG_64BIT
+
+#define EF_R0 0
+#define EF_R1 1
+#define EF_R2 2
+#define EF_R3 3
+#define EF_R4 4
+#define EF_R5 5
+#define EF_R6 6
+#define EF_R7 7
+#define EF_R8 8
+#define EF_R9 9
+#define EF_R10 10
+#define EF_R11 11
+#define EF_R12 12
+#define EF_R13 13
+#define EF_R14 14
+#define EF_R15 15
+#define EF_R16 16
+#define EF_R17 17
+#define EF_R18 18
+#define EF_R19 19
+#define EF_R20 20
+#define EF_R21 21
+#define EF_R22 22
+#define EF_R23 23
+#define EF_R24 24
+#define EF_R25 25
+
+/*
+ * k0/k1 unsaved
+ */
+#define EF_R26 26
+#define EF_R27 27
+
+#define EF_R28 28
+#define EF_R29 29
+#define EF_R30 30
+#define EF_R31 31
+
+/*
+ * Saved special registers
+ */
+#define EF_LO 32
+#define EF_HI 33
+
+#define EF_CP0_EPC 34
+#define EF_CP0_BADVADDR 35
+#define EF_CP0_STATUS 36
+#define EF_CP0_CAUSE 37
+
+#define EF_SIZE 304 /* size in bytes */
+
+#endif /* CONFIG_64BIT */
#endif /* __ASM_MIPS_REG_H */
diff --git a/include/asm-mips/regdef.h b/include/asm-mips/regdef.h
index 691d047..2e65cc3 100644
--- a/include/asm-mips/regdef.h
+++ b/include/asm-mips/regdef.h
@@ -1,52 +1,100 @@
/*
- * include/asm-mips/regdefs.h
- *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1994, 1995 by Ralf Baechle
+ * Copyright (C) 1985 MIPS Computer Systems, Inc.
+ * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
*/
+#ifndef _ASM_REGDEF_H
+#define _ASM_REGDEF_H
-#ifndef __ASM_MIPS_REGDEF_H
-#define __ASM_MIPS_REGDEF_H
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
/*
* Symbolic register names for 32 bit ABI
*/
-#define zero $0 /* wired zero */
-#define AT $1 /* assembler temp - uppercase because of ".set at" */
-#define v0 $2 /* return value */
-#define v1 $3
-#define a0 $4 /* argument registers */
-#define a1 $5
-#define a2 $6
-#define a3 $7
-#define t0 $8 /* caller saved */
-#define t1 $9
-#define t2 $10
-#define t3 $11
-#define t4 $12
-#define t5 $13
-#define t6 $14
-#define t7 $15
-#define s0 $16 /* callee saved */
-#define s1 $17
-#define s2 $18
-#define s3 $19
-#define s4 $20
-#define s5 $21
-#define s6 $22
-#define s7 $23
-#define t8 $24 /* caller saved */
-#define t9 $25
-#define jp $25 /* PIC jump register */
-#define k0 $26 /* kernel scratch */
-#define k1 $27
-#define gp $28 /* global pointer */
-#define sp $29 /* stack pointer */
-#define fp $30 /* frame pointer */
+#define zero $0 /* wired zero */
+#define AT $1 /* assembler temp - uppercase because of ".set at" */
+#define v0 $2 /* return value */
+#define v1 $3
+#define a0 $4 /* argument registers */
+#define a1 $5
+#define a2 $6
+#define a3 $7
+#define t0 $8 /* caller saved */
+#define t1 $9
+#define t2 $10
+#define t3 $11
+#define t4 $12
+#define t5 $13
+#define t6 $14
+#define t7 $15
+#define s0 $16 /* callee saved */
+#define s1 $17
+#define s2 $18
+#define s3 $19
+#define s4 $20
+#define s5 $21
+#define s6 $22
+#define s7 $23
+#define t8 $24 /* caller saved */
+#define t9 $25
+#define jp $25 /* PIC jump register */
+#define k0 $26 /* kernel scratch */
+#define k1 $27
+#define gp $28 /* global pointer */
+#define sp $29 /* stack pointer */
+#define fp $30 /* frame pointer */
#define s8 $30 /* same like fp! */
-#define ra $31 /* return address */
+#define ra $31 /* return address */
-#endif /* __ASM_MIPS_REGDEF_H */
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#define zero $0 /* wired zero */
+#define AT $at /* assembler temp - uppercase because of ".set at" */
+#define v0 $2 /* return value - caller saved */
+#define v1 $3
+#define a0 $4 /* argument registers */
+#define a1 $5
+#define a2 $6
+#define a3 $7
+#define a4 $8 /* arg reg 64 bit; caller saved in 32 bit */
+#define ta0 $8
+#define a5 $9
+#define ta1 $9
+#define a6 $10
+#define ta2 $10
+#define a7 $11
+#define ta3 $11
+#define t0 $12 /* caller saved */
+#define t1 $13
+#define t2 $14
+#define t3 $15
+#define s0 $16 /* callee saved */
+#define s1 $17
+#define s2 $18
+#define s3 $19
+#define s4 $20
+#define s5 $21
+#define s6 $22
+#define s7 $23
+#define t8 $24 /* caller saved */
+#define t9 $25 /* callee address for PIC/temp */
+#define jp $25 /* PIC jump register */
+#define k0 $26 /* kernel temporary */
+#define k1 $27
+#define gp $28 /* global pointer - caller saved for PIC */
+#define sp $29 /* stack pointer */
+#define fp $30 /* frame pointer */
+#define s8 $30 /* callee saved */
+#define ra $31 /* return address */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_REGDEF_H */
diff --git a/include/asm-mips/types.h b/include/asm-mips/types.h
index 707cbf4..f49a217 100644
--- a/include/asm-mips/types.h
+++ b/include/asm-mips/types.h
@@ -1,5 +1,4 @@
-/* $Id: types.h,v 1.3 1999/08/18 23:37:50 ralf Exp $
- *
+/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
@@ -10,6 +9,8 @@
#ifndef _ASM_TYPES_H
#define _ASM_TYPES_H
+#ifndef __ASSEMBLY__
+
typedef unsigned short umode_t;
/*
@@ -40,11 +41,17 @@
#endif
+#endif /* __ASSEMBLY__ */
+
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
#ifdef __KERNEL__
+#define BITS_PER_LONG _MIPS_SZLONG
+
+#ifndef __ASSEMBLY__
+
typedef __signed char s8;
typedef unsigned char u8;
@@ -68,9 +75,24 @@
#endif
-#define BITS_PER_LONG _MIPS_SZLONG
+#if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \
+ || defined(CONFIG_64BIT)
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+typedef u64 dma64_addr_t;
-typedef unsigned long dma_addr_t;
+/*
+ * Don't use phys_t. You've been warned.
+ */
+#ifdef CONFIG_64BIT_PHYS_ADDR
+typedef unsigned long long phys_t;
+#else
+typedef unsigned long phys_t;
+#endif
+
+#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff --git a/include/asm-nios/global_data.h b/include/asm-nios/global_data.h
index fd11389..ddd66cf 100644
--- a/include/asm-nios/global_data.h
+++ b/include/asm-nios/global_data.h
@@ -45,6 +45,7 @@
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("%g7")
diff --git a/include/asm-nios2/global_data.h b/include/asm-nios2/global_data.h
index a1ac288..ae5f617 100644
--- a/include/asm-nios2/global_data.h
+++ b/include/asm-nios2/global_data.h
@@ -44,6 +44,7 @@
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("r15")
diff --git a/include/asm-ppc/4xx_pcie.h b/include/asm-ppc/4xx_pcie.h
index 4c03b05..d27d2a9 100644
--- a/include/asm-ppc/4xx_pcie.h
+++ b/include/asm-ppc/4xx_pcie.h
@@ -29,6 +29,18 @@
#define PCIE2_SDR 0x370
#endif
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define CFG_PCIE_NR_PORTS 2
+
+#define CFG_PCIE_ADDR_HIGH 0x0000000d
+
+#define DCRN_PCIE0_BASE 0x100
+#define DCRN_PCIE1_BASE 0x120
+
+#define PCIE0_SDR 0x300
+#define PCIE1_SDR 0x340
+#endif
+
#if defined(CONFIG_405EX)
#define CFG_PCIE_NR_PORTS 2
@@ -68,7 +80,7 @@
#define PESDR0_PLLLCT2 0x03a1
#define PESDR0_PLLLCT3 0x03a2
-/* common regs, at least for 405EX and 440SPe */
+/* common regs, at for all 4xx with PCIe core */
#define SDRN_PESDR_UTLSET1(n) (sdr_base(n) + 0x00)
#define SDRN_PESDR_UTLSET2(n) (sdr_base(n) + 0x01)
#define SDRN_PESDR_DLPSET(n) (sdr_base(n) + 0x02)
@@ -198,8 +210,73 @@
#define PESDR1_LPB 0x044B
#define PESDR1_PHYSTA 0x044C
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
+#define PESDR0_L0BIST 0x0308 /* PE0 L0 built in self test */
+#define PESDR0_L0BISTSTS 0x0309 /* PE0 L0 built in self test status */
+#define PESDR0_L0CDRCTL 0x030A /* PE0 L0 CDR control */
+#define PESDR0_L0DRV 0x030B /* PE0 L0 drive */
+#define PESDR0_L0REC 0x030C /* PE0 L0 receiver */
+#define PESDR0_L0LPB 0x030D /* PE0 L0 loopback */
+#define PESDR0_L0CLK 0x030E /* PE0 L0 clocking */
+#define PESDR0_PHY_CTL_RST 0x030F /* PE0 PHY control reset */
+#define PESDR0_RSTSTA 0x0310 /* PE0 reset status */
+#define PESDR0_OBS 0x0311 /* PE0 observation register */
+#define PESDR0_L0ERRC 0x0320 /* PE0 L0 error counter */
+
+#define PESDR1_L0BIST 0x0348 /* PE1 L0 built in self test */
+#define PESDR1_L1BIST 0x0349 /* PE1 L1 built in self test */
+#define PESDR1_L2BIST 0x034A /* PE1 L2 built in self test */
+#define PESDR1_L3BIST 0x034B /* PE1 L3 built in self test */
+#define PESDR1_L0BISTSTS 0x034C /* PE1 L0 built in self test status */
+#define PESDR1_L1BISTSTS 0x034D /* PE1 L1 built in self test status */
+#define PESDR1_L2BISTSTS 0x034E /* PE1 L2 built in self test status */
+#define PESDR1_L3BISTSTS 0x034F /* PE1 L3 built in self test status */
+#define PESDR1_L0CDRCTL 0x0350 /* PE1 L0 CDR control */
+#define PESDR1_L1CDRCTL 0x0351 /* PE1 L1 CDR control */
+#define PESDR1_L2CDRCTL 0x0352 /* PE1 L2 CDR control */
+#define PESDR1_L3CDRCTL 0x0353 /* PE1 L3 CDR control */
+#define PESDR1_L0DRV 0x0354 /* PE1 L0 drive */
+#define PESDR1_L1DRV 0x0355 /* PE1 L1 drive */
+#define PESDR1_L2DRV 0x0356 /* PE1 L2 drive */
+#define PESDR1_L3DRV 0x0357 /* PE1 L3 drive */
+#define PESDR1_L0REC 0x0358 /* PE1 L0 receiver */
+#define PESDR1_L1REC 0x0359 /* PE1 L1 receiver */
+#define PESDR1_L2REC 0x035A /* PE1 L2 receiver */
+#define PESDR1_L3REC 0x035B /* PE1 L3 receiver */
+#define PESDR1_L0LPB 0x035C /* PE1 L0 loopback */
+#define PESDR1_L1LPB 0x035D /* PE1 L1 loopback */
+#define PESDR1_L2LPB 0x035E /* PE1 L2 loopback */
+#define PESDR1_L3LPB 0x035F /* PE1 L3 loopback */
+#define PESDR1_L0CLK 0x0360 /* PE1 L0 clocking */
+#define PESDR1_L1CLK 0x0361 /* PE1 L1 clocking */
+#define PESDR1_L2CLK 0x0362 /* PE1 L2 clocking */
+#define PESDR1_L3CLK 0x0363 /* PE1 L3 clocking */
+#define PESDR1_PHY_CTL_RST 0x0364 /* PE1 PHY control reset */
+#define PESDR1_RSTSTA 0x0365 /* PE1 reset status */
+#define PESDR1_OBS 0x0366 /* PE1 observation register */
+#define PESDR1_L0ERRC 0x0368 /* PE1 L0 error counter */
+#define PESDR1_L1ERRC 0x0369 /* PE1 L1 error counter */
+#define PESDR1_L2ERRC 0x036A /* PE1 L2 error counter */
+#define PESDR1_L3ERRC 0x036B /* PE1 L3 error counter */
+#define PESDR0_IHS1 0x036C /* PE interrupt handler interfact setting 1 */
+#define PESDR0_IHS2 0x036D /* PE interrupt handler interfact setting 2 */
+
#endif
+/* SDR Bit Mappings */
+#define PESDRx_RCSSET_HLDPLB 0x10000000
+#define PESDRx_RCSSET_RSTGU 0x01000000
+#define PESDRx_RCSSET_RDY 0x00100000
+#define PESDRx_RCSSET_RSTDL 0x00010000
+#define PESDRx_RCSSET_RSTPYN 0x00001000
+
+#define PESDRx_RCSSTS_PLBIDL 0x10000000
+#define PESDRx_RCSSTS_HRSTRQ 0x01000000
+#define PESDRx_RCSSTS_PGRST 0x00100000
+#define PESDRx_RCSSTS_VC0ACT 0x00010000
+#define PESDRx_RCSSTS_BMEN 0x00000100
+
/*
* UTL register offsets
*/
diff --git a/include/asm-ppc/fsl_serdes.h b/include/asm-ppc/fsl_serdes.h
new file mode 100644
index 0000000..733f919
--- /dev/null
+++ b/include/asm-ppc/fsl_serdes.h
@@ -0,0 +1,21 @@
+#ifndef __FSL_SERDES_H
+#define __FSL_SERDES_H
+
+#include <config.h>
+
+#define FSL_SERDES_CLK_100 0
+#define FSL_SERDES_CLK_125 1
+#define FSL_SERDES_CLK_150 3
+#define FSL_SERDES_PROTO_SATA 0
+#define FSL_SERDES_PROTO_PEX 1
+#define FSL_SERDES_PROTO_PEX_X2 2
+#define FSL_SERDES_PROTO_SGMII 3
+#define FSL_SERDES_VDD_1V 1
+
+#ifdef CONFIG_FSL_SERDES
+extern void fsl_setup_serdes(u32 offset, char proto, char rfcks, char vdd);
+#else
+static void fsl_setup_serdes(u32 offset, char proto, char rfcks, char vdd) {}
+#endif /* CONFIG_FSL_SERDES */
+
+#endif /* __FSL_SERDES_H */
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index 205f7ed..ff6624a 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -40,8 +40,11 @@
bd_t *bd;
unsigned long flags;
unsigned long baudrate;
- unsigned long cpu_clk; /* CPU clock in Hz! */
+ unsigned long cpu_clk; /* CPU clock in Hz! */
unsigned long bus_clk;
+#if defined(CONFIG_8xx)
+ unsigned long brg_clk;
+#endif
#if defined(CONFIG_CPM2)
/* There are many clocks on the MPC8260 - see page 9-5 */
unsigned long vco_out;
@@ -164,6 +167,7 @@
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#if 1
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r2")
diff --git a/include/asm-ppc/gpio.h b/include/asm-ppc/gpio.h
index c3a4a88..fc05dc0 100644
--- a/include/asm-ppc/gpio.h
+++ b/include/asm-ppc/gpio.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -27,7 +27,8 @@
/* 4xx PPC's have 2 GPIO controllers */
#if defined(CONFIG_405EZ) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define GPIO_GROUP_MAX 2
#else
#define GPIO_GROUP_MAX 1
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index 5af22af..49d6860 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -549,14 +549,14 @@
/*----------------------------------------------------------------------------+
| TLB specific defines.
+----------------------------------------------------------------------------*/
-#define TLB_256MB_ALIGN_MASK 0xF0000000
-#define TLB_16MB_ALIGN_MASK 0xFF000000
-#define TLB_1MB_ALIGN_MASK 0xFFF00000
-#define TLB_256KB_ALIGN_MASK 0xFFFC0000
-#define TLB_64KB_ALIGN_MASK 0xFFFF0000
-#define TLB_16KB_ALIGN_MASK 0xFFFFC000
-#define TLB_4KB_ALIGN_MASK 0xFFFFF000
-#define TLB_1KB_ALIGN_MASK 0xFFFFFC00
+#define TLB_256MB_ALIGN_MASK 0xFF0000000ULL
+#define TLB_16MB_ALIGN_MASK 0xFFF000000ULL
+#define TLB_1MB_ALIGN_MASK 0xFFFF00000ULL
+#define TLB_256KB_ALIGN_MASK 0xFFFFC0000ULL
+#define TLB_64KB_ALIGN_MASK 0xFFFFF0000ULL
+#define TLB_16KB_ALIGN_MASK 0xFFFFFC000ULL
+#define TLB_4KB_ALIGN_MASK 0xFFFFFF000ULL
+#define TLB_1KB_ALIGN_MASK 0xFFFFFFC00ULL
#define TLB_256MB_SIZE 0x10000000
#define TLB_16MB_SIZE 0x01000000
#define TLB_1MB_SIZE 0x00100000
@@ -697,7 +697,7 @@
unsigned long mftlb2(unsigned long index);
unsigned long mftlb3(unsigned long index);
-void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
+void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
void remove_tlb(u32 vaddr, u32 size);
void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value);
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-ppc/ppc4xx-intvec.h b/include/asm-ppc/ppc4xx-intvec.h
index 8d04b69..e218119 100644
--- a/include/asm-ppc/ppc4xx-intvec.h
+++ b/include/asm-ppc/ppc4xx-intvec.h
@@ -117,6 +117,73 @@
#define VECNUM_MCTR0 (64 + 8) /* MAl intp coalescence TR0 */
#define VECNUM_MCTR1 (64 + 9) /* MAl intp coalescence TR1 */
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
+/* UIC 0 */
+#define VECNUM_U1 1 /* UART1 */
+#define VECNUM_IIC0 2 /* IIC0 */
+#define VECNUM_IIC1 3 /* IIC1 */
+#define VECNUM_PIM 4 /* PCI inbound message */
+#define VECNUM_PCRW 5 /* PCI command reg write */
+#define VECNUM_PPM 6 /* PCI power management */
+#define VECNUM_MSI0 8 /* PCI MSI level 0 */
+#define VECNUM_EIR0 9 /* External interrupt 0 */
+#define VECNUM_UIC2NC 10 /* UIC2 non-critical interrupt */
+#define VECNUM_UIC2C 11 /* UIC2 critical interrupt */
+#define VECNUM_D0 12 /* DMA channel 0 */
+#define VECNUM_D1 13 /* DMA channel 1 */
+#define VECNUM_D2 14 /* DMA channel 2 */
+#define VECNUM_D3 15 /* DMA channel 3 */
+#define VECNUM_UIC3NC 16 /* UIC3 non-critical interrupt */
+#define VECNUM_UIC3C 17 /* UIC3 critical interrupt */
+#define VECNUM_EIR1 9 /* External interrupt 1 */
+#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
+#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+
+/* UIC 1 */
+#define VECNUM_EIR2 (32 + 0) /* External interrupt 0 */
+#define VECNUM_U0 (32 + 1) /* UART0 */
+#define VECNUM_EIR3 (32 + 20) /* External interrupt 3 */
+#define VECNUM_EIR4 (32 + 21) /* External interrupt 4 */
+#define VECNUM_EIR5 (32 + 26) /* External interrupt 5 */
+#define VECNUM_EIR6 (32 + 27) /* External interrupt 6 */
+#define VECNUM_U2 (32 + 28) /* UART2 */
+#define VECNUM_U3 (32 + 29) /* UART3 */
+#define VECNUM_EIR7 (32 + 30) /* External interrupt 7 */
+#define VECNUM_EIR8 (32 + 31) /* External interrupt 8 */
+
+/* UIC 2 */
+#define VECNUM_EIR9 (64 + 2) /* External interrupt 9 */
+#define VECNUM_MS (64 + 3) /* MAL SERR */
+#define VECNUM_TXDE (64 + 4) /* MAL TXDE */
+#define VECNUM_RXDE (64 + 5) /* MAL RXDE */
+#define VECNUM_MTE (64 + 6) /* MAL TXEOB */
+#define VECNUM_MRE (64 + 7) /* MAL RXEOB */
+#define VECNUM_ETH0 (64 + 16) /* Ethernet 0 */
+#define VECNUM_ETH1 (64 + 17) /* Ethernet 1 */
+#define VECNUM_ETH2 (64 + 18) /* Ethernet 2 */
+#define VECNUM_ETH3 (64 + 19) /* Ethernet 3 */
+#define VECNUM_EWU0 (64 + 20) /* Emac 0 wakeup */
+#define VECNUM_EWU1 (64 + 21) /* Emac 1 wakeup */
+#define VECNUM_EWU2 (64 + 22) /* Emac 2 wakeup */
+#define VECNUM_EWU3 (64 + 23) /* Emac 3 wakeup */
+#define VECNUM_EIR10 (64 + 24) /* External interrupt 10 */
+#define VECNUM_EIR11 (64 + 25) /* External interrupt 11 */
+
+/* UIC 3 */
+#define VECNUM_EIR12 (96 + 20) /* External interrupt 20 */
+#define VECNUM_EIR13 (96 + 21) /* External interrupt 21 */
+#define VECNUM_EIR14 (96 + 22) /* External interrupt 22 */
+#define VECNUM_EIR15 (96 + 23) /* External interrupt 23 */
+#define VECNUM_PCIEMSI0 (96 + 24) /* PCI Express MSI level 0 */
+#define VECNUM_PCIEMSI1 (96 + 25) /* PCI Express MSI level 1 */
+#define VECNUM_PCIEMSI2 (96 + 26) /* PCI Express MSI level 2 */
+#define VECNUM_PCIEMSI3 (96 + 27) /* PCI Express MSI level 3 */
+#define VECNUM_PCIEMSI4 (96 + 28) /* PCI Express MSI level 4 */
+#define VECNUM_PCIEMSI5 (96 + 29) /* PCI Express MSI level 5 */
+#define VECNUM_PCIEMSI6 (96 + 30) /* PCI Express MSI level 6 */
+#define VECNUM_PCIEMSI7 (96 + 31) /* PCI Express MSI level 7 */
+
#elif defined(CONFIG_440SPE)
/* UIC 0 */
@@ -130,10 +197,14 @@
#define VECNUM_MSI0 7 /* PCI MSI level 0 */
#define VECNUM_MSI1 8 /* PCI MSI level 0 */
#define VECNUM_MSI2 9 /* PCI MSI level 0 */
+#define VECNUM_UIC2NC 10 /* UIC2 non-critical interrupt */
+#define VECNUM_UIC2C 11 /* UIC2 critical interrupt */
#define VECNUM_D0 12 /* DMA channel 0 */
#define VECNUM_D1 13 /* DMA channel 1 */
#define VECNUM_D2 14 /* DMA channel 2 */
#define VECNUM_D3 15 /* DMA channel 3 */
+#define VECNUM_UIC3NC 16 /* UIC3 non-critical interrupt */
+#define VECNUM_UIC3C 17 /* UIC3 critical interrupt */
#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 86c5df2..b7a5b28 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -802,6 +802,10 @@
#define PVR_440SPe_RA 0x53521890 /* 440SPe rev A without RAID 6 support */
#define PVR_440SPe_6_RB 0x53421891 /* 440SPe rev B with RAID 6 support enabled */
#define PVR_440SPe_RB 0x53521891 /* 440SPe rev B without RAID 6 support */
+#define PVR_460EX_SE_RA 0x130218A2 /* 460EX rev A with Security Engine */
+#define PVR_460EX_RA 0x130218A3 /* 460EX rev A without Security Engine */
+#define PVR_460GT_SE_RA 0x130218A0 /* 460GT rev A with Security Engine */
+#define PVR_460GT_RA 0x130218A1 /* 460GT rev A without Security Engine */
#define PVR_601 0x00010000
#define PVR_602 0x00050000
#define PVR_603 0x00030000
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 2b31814..786ba03 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -115,7 +115,8 @@
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
unsigned int bi_opbfreq; /* OPB clock in Hz */
int bi_iic_fast[2]; /* Use fast i2c mode */
#endif
@@ -123,7 +124,8 @@
unsigned char bi_sernum[8];
#endif
#if defined(CONFIG_4xx)
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
int bi_phynum[4]; /* Determines phy mapping */
int bi_phymode[4]; /* Determines phy mode */
#elif defined(CONFIG_405EP) || defined(CONFIG_440)
diff --git a/include/asm-sh/global_data.h b/include/asm-sh/global_data.h
index 0a44a34..521a66f 100644
--- a/include/asm-sh/global_data.h
+++ b/include/asm-sh/global_data.h
@@ -44,6 +44,7 @@
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("r13")
diff --git a/include/common.h b/include/common.h
index 3351e2c..e03ead1 100644
--- a/include/common.h
+++ b/include/common.h
@@ -270,7 +270,9 @@
void pci_master_init (struct pci_controller *);
# endif
int is_pci_host (struct pci_controller *);
-#if defined(CONFIG_440SPE) || defined(CONFIG_405EX)
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_405EX)
void pcie_setup_hoses(int busno);
#endif
#endif
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index f3965ef..69276a3 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -70,6 +70,7 @@
#define CONFIG_CMD_SAVES /* save S record dump */
#define CONFIG_CMD_SCSI /* SCSI Support */
#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
+#define CONFIG_CMD_SETEXPR /* setexpr support */
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
#define CONFIG_CMD_SNTP /* SNTP support */
#define CONFIG_CMD_SPI /* SPI utility */
diff --git a/include/configs/Adder.h b/include/configs/Adder.h
index 4304ecc..7919991 100644
--- a/include/configs/Adder.h
+++ b/include/configs/Adder.h
@@ -37,6 +37,8 @@
#define CONFIG_ETHER_ON_FEC1
#define CONFIG_ETHER_ON_FEC2
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
#if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2)
#define CFG_DISCOVER_PHY
@@ -212,4 +214,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from flash */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index f12a3e6..9576fa5 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -38,6 +38,14 @@
#define CONFIG_PCI
#define CONFIG_83XX_GENERIC_PCI
+#define CONFIG_MISC_INIT_R
+
+/*
+ * On-board devices
+ */
+#define CONFIG_VSC7385_ENET
+
+
#ifdef CFG_66MHZ
#define CONFIG_83XX_CLKIN 66666667 /* in Hz */
#elif defined(CFG_33MHZ)
@@ -65,6 +73,22 @@
#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
/*
+ * Device configurations
+ */
+
+/* Vitesse 7385 */
+
+#ifdef CONFIG_VSC7385_ENET
+
+#define CONFIG_TSEC2
+
+/* The flash address and size of the VSC7385 firmware image */
+#define CONFIG_VSC7385_IMAGE 0xFE7FE000
+#define CONFIG_VSC7385_IMAGE_SIZE 8192
+
+#endif
+
+/*
* DDR Setup
*/
#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
@@ -214,20 +238,25 @@
#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE
#define CFG_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
-#define CFG_VSC7385_BASE 0xF0000000
-
-#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */
-#define CFG_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */
-#define CFG_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/
-#define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE/* Access window base at VSC7385 base */
-#define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access window size 128K */
-
/* local bus read write buffer mapping */
#define CFG_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */
#define CFG_OR3_PRELIM 0xFFFF8FF7 /* 32kB */
#define CFG_LBLAWBAR3_PRELIM 0xFA000000
#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */
+/* Vitesse 7385 */
+
+#define CFG_VSC7385_BASE 0xF0000000
+
+#ifdef CONFIG_VSC7385_ENET
+
+#define CFG_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */
+#define CFG_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/
+#define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE/* Access window base at VSC7385 base */
+#define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access window size 128K */
+
+#endif
+
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
@@ -263,13 +292,6 @@
#define CFG_I2C_OFFSET 0x3000
#define CFG_I2C2_OFFSET 0x3100
-/* TSEC */
-#define CFG_TSEC1_OFFSET 0x24000
-#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
-#define CFG_TSEC2_OFFSET 0x25000
-#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
-#define CONFIG_NET_MULTI
-
/*
* General PCI
* Addresses are mapped 1-1.
@@ -288,26 +310,31 @@
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
/*
- * TSEC configuration
+ * TSEC
*/
#define CONFIG_TSEC_ENET /* TSEC ethernet support */
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI
+#define CONFIG_GMII /* MII PHY management */
+
+#ifdef CONFIG_TSEC1
+#define CONFIG_HAS_ETH0
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CFG_TSEC1_OFFSET 0x24000
+#define TSEC1_PHY_ADDR 0x1c
+#define TSEC1_FLAGS TSEC_GIGABIT
+#define TSEC1_PHYIDX 0
#endif
-#define CONFIG_GMII 1 /* MII PHY management */
-#define CONFIG_TSEC1 1
-
-#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_TSEC2 1
+#ifdef CONFIG_TSEC2
+#define CONFIG_HAS_ETH1
#define CONFIG_TSEC2_NAME "TSEC1"
-#define TSEC1_PHY_ADDR 0x1c
-#define TSEC2_PHY_ADDR 4
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC2_FLAGS TSEC_GIGABIT
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
+#define CFG_TSEC2_OFFSET 0x25000
+#define TSEC2_PHY_ADDR 4
+#define TSEC2_FLAGS TSEC_GIGABIT
+#define TSEC2_PHYIDX 0
+#endif
+
/* Options are: TSEC[0-1] */
#define CONFIG_ETHPRIME "TSEC1"
@@ -496,10 +523,13 @@
*/
#define CONFIG_ENV_OVERWRITE
+#ifdef CONFIG_HAS_ETH0
#define CONFIG_ETHADDR 00:E0:0C:00:95:01
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH0
+#endif
+
+#ifdef CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:95:02
+#endif
#define CONFIG_IPADDR 10.0.0.2
#define CONFIG_SERVERIP 10.0.0.1
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index ff7101f..af78726 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -299,7 +299,7 @@
#define CFG_PCI_MMIO_BASE 0x90000000
#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
-#define CFG_PCI_IO_BASE 0xE0300000
+#define CFG_PCI_IO_BASE 0x00000000
#define CFG_PCI_IO_PHYS 0xE0300000
#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index bf5ef4b..94c4c6b 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -66,6 +66,13 @@
#define CFG_IMMR 0xE0000000
/*
+ * System performance
+ */
+#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
+#define CFG_SPCR_OPT 1 /* (0-1) Optimize transactions between CSB and the SEC and QUICC Engine block */
+
+/*
* DDR Setup
*/
#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
@@ -82,17 +89,51 @@
/* Manually set up DDR parameters
*/
#define CFG_DDR_SIZE 64 /* MB */
-#define CFG_DDR_CS0_CONFIG 0x80840101
-#define CFG_DDR_TIMING_0 0x00220802
-#define CFG_DDR_TIMING_1 0x3935d322
-#define CFG_DDR_TIMING_2 0x0f9048ca
+#define CFG_DDR_CS0_CONFIG ( CSCONFIG_EN \
+ | CSCONFIG_ODT_WR_ACS \
+ | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9 )
+ /* 0x80010101 */
+#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_WRT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_RRT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_WWT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
+ | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
+ /* 0x00220802 */
+#define CFG_DDR_TIMING_1 ( ( 2 << TIMING_CFG1_PRETOACT_SHIFT ) \
+ | ( 6 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
+ | ( 2 << TIMING_CFG1_ACTTORW_SHIFT ) \
+ | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
+ | ( 3 << TIMING_CFG1_REFREC_SHIFT ) \
+ | ( 2 << TIMING_CFG1_WRREC_SHIFT ) \
+ | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
+ | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
+ /* 0x26253222 */
+#define CFG_DDR_TIMING_2 ( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+ | (31 << TIMING_CFG2_CPO_SHIFT ) \
+ | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
+ | ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
+ | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
+ | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
+ | ( 7 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+ /* 0x1f9048c7 */
#define CFG_DDR_TIMING_3 0x00000000
-#define CFG_DDR_CLK_CNTL 0x02000000
-#define CFG_DDR_MODE 0x44400232
+#define CFG_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+ /* 0x02000000 */
+#define CFG_DDR_MODE ( ( 0x4448 << SDRAM_MODE_ESD_SHIFT ) \
+ | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) )
+ /* 0x44480232 */
#define CFG_DDR_MODE2 0x8000c000
-#define CFG_DDR_INTERVAL 0x03200064
+#define CFG_DDR_INTERVAL ( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+ | ( 100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+ /* 0x03200064 */
#define CFG_DDR_CS0_BNDS 0x00000003
-#define CFG_DDR_SDRAM_CFG 0x43080000
+#define CFG_DDR_SDRAM_CFG ( SDRAM_CFG_SREN \
+ | SDRAM_CFG_SDRAM_TYPE_DDR2 \
+ | SDRAM_CFG_32_BE )
+ /* 0x43080000 */
#define CFG_DDR_SDRAM_CFG2 0x00401000
#endif
@@ -280,10 +321,10 @@
#define CFG_I2C_OFFSET 0x3000
/*
- * Config on-board RTC
+ * Config on-board EEPROM
*/
-#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
-#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_EEPROM_ADDR_LEN 2
/*
* General PCI
@@ -376,6 +417,7 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ASKENV
#if defined(CONFIG_PCI)
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index f32c4f7..be2ab45 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -346,7 +346,7 @@
#define CFG_PCI_MMIO_BASE 0x90000000
#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
-#define CFG_PCI_IO_BASE 0xE0300000
+#define CFG_PCI_IO_BASE 0x00000000
#define CFG_PCI_IO_PHYS 0xE0300000
#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 48c2736..6b8b74d 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -68,12 +68,16 @@
#define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */
+#define CONFIG_MISC_INIT_F
+#define CONFIG_MISC_INIT_R
-/* On-board devices */
+/*
+ * On-board devices
+ */
#ifdef CONFIG_MPC8349ITX
#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */
-#define CONFIG_VSC7385 /* The Vitesse 7385 5-port switch */
+#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */
#endif
#define CONFIG_PCI
@@ -88,9 +92,6 @@
/* I2C */
#ifdef CONFIG_HARD_I2C
-#define CONFIG_MISC_INIT_F
-#define CONFIG_MISC_INIT_R
-
#define CONFIG_FSL_I2C
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_CMD_TREE
@@ -155,7 +156,7 @@
#define CFG_MEMTEST_END 0x2000
#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
- DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+ DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
#ifdef CONFIG_HARD_I2C
#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
@@ -190,6 +191,18 @@
#define CFG_FLASH_SIZE 16 /* FLASH size in MB */
#define CFG_FLASH_SIZE_SHIFT 4 /* log2 of the above value */
+/* Vitesse 7385 */
+
+#ifdef CONFIG_VSC7385_ENET
+
+#define CONFIG_TSEC2
+
+/* The flash address and size of the VSC7385 firmware image */
+#define CONFIG_VSC7385_IMAGE 0xFEFFE000
+#define CONFIG_VSC7385_IMAGE_SIZE 8192
+
+#endif
+
/*
* BRx, ORx, LBLAWBARx, and LBLAWARx
*/
@@ -205,10 +218,10 @@
/* Vitesse 7385 */
-#ifdef CONFIG_VSC7385
-
#define CFG_VSC7385_BASE 0xF8000000
+#ifdef CONFIG_VSC7385_ENET
+
#define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V)
#define CFG_OR1_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \
@@ -384,7 +397,7 @@
#define CONFIG_HAS_ETH1
#define CONFIG_TSEC2_NAME "TSEC1"
#define CFG_TSEC2_OFFSET 0x25000
-#define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */
+
#define TSEC2_PHY_ADDR 4
#define TSEC2_PHYIDX 0
#define TSEC2_FLAGS TSEC_GIGABIT
@@ -619,11 +632,11 @@
*/
#define CONFIG_ENV_OVERWRITE
-#ifdef CONFIG_TSEC1
+#ifdef CONFIG_HAS_ETH0
#define CONFIG_ETHADDR 00:E0:0C:00:8C:01
#endif
-#ifdef CONFIG_TSEC2
+#ifdef CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02
#endif
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index c8dcbc6..46451c4 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -194,6 +194,7 @@
#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
#define CFG_FLASH_SIZE 32 /* max FLASH size is 32M */
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
@@ -374,7 +375,7 @@
#define CFG_PCI_MMIO_BASE 0x90000000
#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
-#define CFG_PCI_IO_BASE 0xE0300000
+#define CFG_PCI_IO_BASE 0x00000000
#define CFG_PCI_IO_PHYS 0xE0300000
#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 27b037a..a4f6af6 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -30,8 +30,8 @@
* System Clock Setup
*/
#ifdef CONFIG_CLKIN_33MHZ
-#define CONFIG_83XX_CLKIN 33000000
-#define CONFIG_SYS_CLK_FREQ 33000000
+#define CONFIG_83XX_CLKIN 33333333
+#define CONFIG_SYS_CLK_FREQ 33333333
#define PCI_33M 1
#define HRCWL_CSB_TO_CLKIN_MPC8360ERDK HRCWL_CSB_TO_CLKIN_10X1
#else
@@ -89,8 +89,8 @@
#define CFG_83XX_DDR_USES_CS0
-#undef CONFIG_DDR_ECC /* support DDR ECC function */
-#undef CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */
+#define CONFIG_DDR_ECC /* support DDR ECC function */
+#define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */
/*
* DDRCDR - DDR Control Driver Register
@@ -104,20 +104,44 @@
*/
#define CONFIG_DDR_II
#define CFG_DDR_SIZE 256 /* MB */
-#define CFG_DDRCDR 0x80080001
#define CFG_DDR_CS0_BNDS 0x0000000f
#define CFG_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | \
- CSCONFIG_COL_BIT_10)
-#define CFG_DDR_TIMING_0 0x00330903
-#define CFG_DDR_TIMING_1 0x3835a322
-#define CFG_DDR_TIMING_2 0x00104909
-#define CFG_DDR_TIMING_3 0x00000000
-#define CFG_DDR_CLK_CNTL 0x02000000
+ CSCONFIG_COL_BIT_10 | CSCONFIG_ODT_WR_ACS)
+#define CFG_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | SDRAM_CFG_ECC_EN)
+#define CFG_DDR_SDRAM_CFG2 0x00001000
+#define CFG_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+#define CFG_DDR_INTERVAL ((256 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+ (1115 << SDRAM_INTERVAL_REFINT_SHIFT))
#define CFG_DDR_MODE 0x47800432
#define CFG_DDR_MODE2 0x8000c000
-#define CFG_DDR_INTERVAL 0x045b0100
-#define CFG_DDR_SDRAM_CFG 0x03000000
-#define CFG_DDR_SDRAM_CFG2 0x00001000
+
+#define CFG_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+ (9 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+ (3 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+ (3 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+ (0 << TIMING_CFG0_WWT_SHIFT) | \
+ (0 << TIMING_CFG0_RRT_SHIFT) | \
+ (0 << TIMING_CFG0_WRT_SHIFT) | \
+ (0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CFG_DDR_TIMING_1 (( TIMING_CFG1_CASLAT_30) | \
+ ( 2 << TIMING_CFG1_WRTORD_SHIFT) | \
+ ( 2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+ ( 3 << TIMING_CFG1_WRREC_SHIFT) | \
+ (10 << TIMING_CFG1_REFREC_SHIFT) | \
+ ( 3 << TIMING_CFG1_ACTTORW_SHIFT) | \
+ ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+ ( 3 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CFG_DDR_TIMING_2 ((9 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+ (4 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+ (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+ (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+ (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+ (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
+ (0 << TIMING_CFG2_CPO_SHIFT))
+
+#define CFG_DDR_TIMING_3 0x00000000
/*
* Memory test
@@ -184,6 +208,11 @@
* NAND flash on the local bus
*/
#define CFG_NAND_BASE 0x60000000
+#define CONFIG_CMD_NAND 1
+#define CONFIG_NAND_FSL_UPM 1
+#define CFG_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE
#define CFG_LBLAWAR1_PRELIM 0x8000001b /* Access window size 4K */
@@ -230,6 +259,7 @@
/* Pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
@@ -290,7 +320,7 @@
#define CFG_UEC1_TX_CLK QE_CLK9
#define CFG_UEC1_ETH_TYPE GIGA_ETH
#define CFG_UEC1_PHY_ADDR 2
-#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
+#define CFG_UEC1_INTERFACE_MODE ENET_1000_RGMII_RXID
#endif
#define CONFIG_UEC_ETH2 /* GETH2 */
@@ -301,7 +331,7 @@
#define CFG_UEC2_TX_CLK QE_CLK4
#define CFG_UEC2_ETH_TYPE GIGA_ETH
#define CFG_UEC2_PHY_ADDR 4
-#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
+#define CFG_UEC2_INTERFACE_MODE ENET_1000_RGMII_RXID
#endif
/*
@@ -340,6 +370,7 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
@@ -499,27 +530,44 @@
"consoledev=ttyS0\0"\
"loadaddr=a00000\0"\
"fdtaddr=900000\0"\
- "bootfile=uImage\0"\
"fdtfile=dtb\0"\
"fsfile=fs\0"\
"ubootfile=u-boot.bin\0"\
+ "mtdparts=mtdparts=60000000.nand-flash:4096k(kernel),128k(dtb),-(rootfs)\0"\
"setbootargs=setenv bootargs console=$consoledev,$baudrate "\
"$mtdparts panic=1\0"\
"adddhcpargs=setenv bootargs $bootargs ip=on\0"\
"addnfsargs=setenv bootargs $bootargs ip=$ipaddr:$serverip:"\
"$gatewayip:$netmask:$hostname:$netdev:off "\
"root=/dev/nfs rw nfsroot=$serverip:$rootpath\0"\
+ "addnandargs=setenv bootargs $bootargs root=/dev/mtdblock3 "\
+ "rootfstype=jffs2 rw\0"\
"tftp_get_uboot=tftp 100000 $ubootfile\0"\
"tftp_get_kernel=tftp $loadaddr $bootfile\0"\
"tftp_get_dtb=tftp $fdtaddr $fdtfile\0"\
"tftp_get_fs=tftp c00000 $fsfile\0"\
+ "nand_erase_kernel=nand erase 0 400000\0"\
+ "nand_erase_dtb=nand erase 400000 20000\0"\
+ "nand_erase_fs=nand erase 420000 3be0000\0"\
+ "nand_write_kernel=nand write.jffs2 $loadaddr 0 400000\0"\
+ "nand_write_dtb=nand write.jffs2 $fdtaddr 400000 20000\0"\
+ "nand_write_fs=nand write.jffs2 c00000 420000 $filesize\0"\
+ "nand_read_kernel=nand read.jffs2 $loadaddr 0 400000\0"\
+ "nand_read_dtb=nand read.jffs2 $fdtaddr 400000 20000\0"\
"nor_reflash=protect off ff800000 ff87ffff ; erase ff800000 ff87ffff ; "\
"cp.b 100000 ff800000 $filesize\0"\
+ "nand_reflash_kernel=run tftp_get_kernel nand_erase_kernel "\
+ "nand_write_kernel\0"\
+ "nand_reflash_dtb=run tftp_get_dtb nand_erase_dtb nand_write_dtb\0"\
+ "nand_reflash_fs=run tftp_get_fs nand_erase_fs nand_write_fs\0"\
+ "nand_reflash=run nand_reflash_kernel nand_reflash_dtb "\
+ "nand_reflash_fs\0"\
"boot_m=bootm $loadaddr - $fdtaddr\0"\
- "dhcpboot=run setbootargs adddhcpargs tftp_get_kernel tftp_get_dtb "\
- "boot_m\0"\
+ "dhcpboot=dhcp ; run setbootargs adddhcpargs tftp_get_dtb boot_m\0"\
"nfsboot=run setbootargs addnfsargs tftp_get_kernel tftp_get_dtb "\
- "boot_m\0"\
+ "boot_m\0"\
+ "nandboot=run setbootargs addnandargs nand_read_kernel nand_read_dtb "\
+ "boot_m\0"\
""
#define CONFIG_BOOTCOMMAND "run dhcpboot"
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 5586533..b307bf7 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -338,7 +338,7 @@
#define CFG_PCI_MMIO_BASE 0x90000000
#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
-#define CFG_PCI_IO_BASE 0xE0300000
+#define CFG_PCI_IO_BASE 0x00000000
#define CFG_PCI_IO_PHYS 0xE0300000
#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 1964946..90812e9 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -32,6 +32,15 @@
#define CONFIG_PCI 1
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MISC_INIT_R
+
+/*
+ * On-board devices
+ */
+#define CONFIG_TSEC_ENET /* TSEC Ethernet support */
+#define CONFIG_VSC7385_ENET
+
/*
* System Clock Setup
*/
@@ -118,6 +127,22 @@
#define CFG_IMMR 0xE0000000
/*
+ * Device configurations
+ */
+
+/* Vitesse 7385 */
+
+#ifdef CONFIG_VSC7385_ENET
+
+#define CONFIG_TSEC2
+
+/* The flash address and size of the VSC7385 firmware image */
+#define CONFIG_VSC7385_IMAGE 0xFE7FE000
+#define CONFIG_VSC7385_IMAGE_SIZE 8192
+
+#endif
+
+/*
* DDR Setup
*/
#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
@@ -251,15 +276,38 @@
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+/*
+ * NAND Flash on the Local Bus
+ */
+#define CFG_NAND_BASE 0xE0600000 /* 0xE0600000 */
+#define CFG_BR1_PRELIM (CFG_NAND_BASE | \
+ (2 << BR_DECC_SHIFT) | /* Use HW ECC */ \
+ BR_PS_8 | /* Port Size = 8 bit */ \
+ BR_MS_FCM | /* MSEL = FCM */ \
+ BR_V) /* valid */
+#define CFG_OR1_PRELIM (0xFFFF8000 | /* length 32K */ \
+ OR_FCM_CSCT | \
+ OR_FCM_CST | \
+ OR_FCM_CHT | \
+ OR_FCM_SCY_1 | \
+ OR_FCM_TRLX | \
+ OR_FCM_EHTR)
+#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE
+#define CFG_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
+
+/* Vitesse 7385 */
+
#define CFG_VSC7385_BASE 0xF0000000
-/* VSC7385 Gigabit Switch support */
-#define CONFIG_VSC7385_ENET
+#ifdef CONFIG_VSC7385_ENET
+
#define CFG_BR2_PRELIM 0xf0000801 /* Base address */
#define CFG_OR2_PRELIM 0xfffe09ff /* 128K bytes*/
#define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE /* Access Base */
#define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access Size 128K */
+#endif
+
/*
* Serial Port
*/
@@ -276,6 +324,11 @@
#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
+/* SERDES */
+#define CONFIG_FSL_SERDES
+#define CONFIG_FSL_SERDES1 0xe3000
+#define CONFIG_FSL_SERDES2 0xe3100
+
/* Use the HUSH parser */
#define CFG_HUSH_PARSER
#ifdef CFG_HUSH_PARSER
@@ -285,6 +338,7 @@
/* Pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
@@ -312,7 +366,7 @@
#define CFG_PCI_MMIO_BASE 0x90000000
#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
-#define CFG_PCI_IO_BASE 0xE0300000
+#define CFG_PCI_IO_BASE 0x00000000
#define CFG_PCI_IO_PHYS 0xE0300000
#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
@@ -324,43 +378,43 @@
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#undef CONFIG_EEPRO100
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
#endif /* CONFIG_PCI */
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
-#endif
-
/*
* TSEC
*/
-#define CONFIG_TSEC_ENET /* TSEC ethernet support */
-#define CFG_TSEC1_OFFSET 0x24000
-#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
-#define CFG_TSEC2_OFFSET 0x25000
-#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
+#ifdef CONFIG_TSEC_ENET
-/*
- * TSEC ethernet configuration
- */
-#define CONFIG_GMII 1 /* MII PHY management */
-#define CONFIG_TSEC1 1
+#define CONFIG_NET_MULTI
+#define CONFIG_GMII /* MII PHY management */
+
+#define CONFIG_TSEC1
+
+#ifdef CONFIG_TSEC1
+#define CONFIG_HAS_ETH0
#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "TSEC1"
+#define CFG_TSEC1_OFFSET 0x24000
#define TSEC1_PHY_ADDR 2
-#define TSEC2_PHY_ADDR 0x1c
#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
+#endif
+#ifdef CONFIG_TSEC2
+#define CONFIG_HAS_ETH1
+#define CONFIG_TSEC2_NAME "TSEC1"
+#define CFG_TSEC2_OFFSET 0x25000
+#define TSEC2_PHY_ADDR 0x1c
+#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_PHYIDX 0
+#endif
/* Options are: TSEC[0-1] */
#define CONFIG_ETHPRIME "TSEC0"
+#endif
+
/*
* Environment
*/
@@ -529,10 +583,15 @@
*/
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_HAS_ETH0 /* add support for "ethaddr" */
-#define CONFIG_ETHADDR 00:04:9f:ef:04:01
-#define CONFIG_HAS_ETH1 /* add support for "eth1addr" */
-#define CONFIG_ETH1ADDR 00:04:9f:ef:04:02
+#ifdef CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR 00:04:9f:ef:04:01
+#endif
+
+#ifdef CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:04:9f:ef:04:02
+#endif
+
+#define CONFIG_HAS_FSL_DR_USB
#define CONFIG_IPADDR 10.0.0.2
#define CONFIG_SERVERIP 10.0.0.1
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 9a0e9b8..b36c826 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -252,12 +252,22 @@
"setup=tftp 200000 cam5200/setup.img; autoscr 200000\0"
#endif
+#if defined(CONFIG_TQM5200_B)
+#define ENV_FLASH_LAYOUT \
+ "fdt_addr=FC100000\0" \
+ "kernel_addr=FC140000\0" \
+ "ramdisk_addr=FC600000\0"
+#else /* !CONFIG_TQM5200_B */
+#define ENV_FLASH_LAYOUT \
+ "fdt_addr=FC0A0000\0" \
+ "kernel_addr=FC0C0000\0" \
+ "ramdisk_addr=FC300000\0"
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"console=ttyPSC0\0" \
- "fdt_addr=FC0A0000\0" \
- "kernel_addr=FC0C0000\0" \
- "ramdisk_addr=FC300000\0" \
+ ENV_FLASH_LAYOUT \
"kernel_addr_r=400000\0" \
"fdt_addr_r=600000\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
@@ -400,8 +410,9 @@
# if defined(CONFIG_TQM5200_B)
# if defined(CFG_LOWBOOT)
# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:1m(firmware)," \
- "1536k(kernel)," \
- "3584k(small-fs)," \
+ "256k(dtb)," \
+ "2304k(kernel)," \
+ "2560k(small-fs)," \
"2m(initrd)," \
"8m(misc)," \
"16m(big-fs)"
diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h
index 6cb6bc4..f2c8703 100644
--- a/include/configs/bf533-ezkit.h
+++ b/include/configs/bf533-ezkit.h
@@ -5,6 +5,8 @@
#ifndef __CONFIG_EZKIT533_H__
#define __CONFIG_EZKIT533_H__
+#include <asm/blackfin-config-pre.h>
+
#define CONFIG_BAUDRATE 57600
#define CONFIG_STAMP 1
@@ -41,10 +43,7 @@
#define CONFIG_PANIC_HANG 1
-#define ADSP_BF531 0x31
-#define ADSP_BF532 0x32
-#define ADSP_BF533 0x33
-#define BFIN_CPU ADSP_BF533
+#define CONFIG_BFIN_CPU bf533-0.3
/* This sets the default state of the cache on U-Boot's boot */
#define CONFIG_ICACHE_ON
@@ -120,7 +119,7 @@
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600"
-#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */
+#define CFG_PROMPT "bfin> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index cce6ef7..76dd2fa 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -5,6 +5,8 @@
#ifndef __CONFIG_STAMP_H__
#define __CONFIG_STAMP_H__
+#include <asm/blackfin-config-pre.h>
+
#define CONFIG_STAMP 1
#define CONFIG_RTC_BFIN 1
#define CONFIG_BF533 1
@@ -21,10 +23,7 @@
#define CONFIG_PANIC_HANG 1
-#define ADSP_BF531 0x31
-#define ADSP_BF532 0x32
-#define ADSP_BF533 0x33
-#define BFIN_CPU ADSP_BF533
+#define CONFIG_BFIN_CPU bf533-0.3
/* This sets the default state of the cache on U-Boot's boot */
#define CONFIG_ICACHE_ON
@@ -329,23 +328,7 @@
#define CONFIG_BAUDRATE 57600
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#if (BFIN_BOOT_MODE == BF533_SPI_BOOT)
-#if (BFIN_CPU == ADSP_BF531)
-#define CFG_PROMPT "serial_bf531> " /* Monitor Command Prompt */
-#elif (BFIN_CPU == ADSP_BF532)
-#define CFG_PROMPT "serial_bf532> " /* Monitor Command Prompt */
-#else
-#define CFG_PROMPT "serial_bf533> " /* Monitor Command Prompt */
-#endif
-#else
-#if (BFIN_CPU == ADSP_BF531)
-#define CFG_PROMPT "bf531> " /* Monitor Command Prompt */
-#elif (BFIN_CPU == ADSP_BF532)
-#define CFG_PROMPT "bf532> " /* Monitor Command Prompt */
-#else
-#define CFG_PROMPT "bf533> " /* Monitor Command Prompt */
-#endif
-#endif
+#define CFG_PROMPT "bfin> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index b9a9e3c..0e189d4 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -5,6 +5,8 @@
#ifndef __CONFIG_BF537_H__
#define __CONFIG_BF537_H__
+#include <asm/blackfin-config-pre.h>
+
#define CFG_LONGHELP 1
#define CONFIG_CMDLINE_EDITING 1
#define CONFIG_BAUDRATE 57600
@@ -31,10 +33,8 @@
#define CONFIG_PANIC_HANG 1
-#define ADSP_BF534 0x34
-#define ADSP_BF536 0x36
-#define ADSP_BF537 0x37
-#define BFIN_CPU ADSP_BF537
+#define CONFIG_BFIN_CPU bf537-0.2
+#define CONFIG_BFIN_MAC
/* This sets the default state of the cache on U-Boot's boot */
#define CONFIG_ICACHE_ON
@@ -113,7 +113,7 @@
* Network Settings
*/
/* network support */
-#if (BFIN_CPU != ADSP_BF534)
+#ifdef CONFIG_BFIN_MAC
#define CONFIG_IPADDR 192.168.0.15
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_GATEWAYIP 192.168.0.1
@@ -186,7 +186,7 @@
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_DATE
-#if (BFIN_CPU == ADSP_BF534)
+#ifndef CONFIG_BFIN_MAC
#undef CONFIG_CMD_NET
#else
#define CONFIG_CMD_PING
@@ -219,7 +219,7 @@
#define CONFIG_LOADADDR 0x1000000
#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
-#if (BFIN_CPU != ADSP_BF534)
+#ifdef CONFIG_BFIN_MAC
#define CONFIG_EXTRA_ENV_SETTINGS \
"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
@@ -243,7 +243,7 @@
""
#endif
#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
-#if (BFIN_CPU != ADSP_BF534)
+#ifdef CONFIG_BFIN_MAC
#define CONFIG_EXTRA_ENV_SETTINGS \
"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
@@ -267,23 +267,7 @@
#endif
#endif
-#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
-#if (BFIN_CPU == ADSP_BF534)
-#define CFG_PROMPT "serial_bf534> " /* Monitor Command Prompt */
-#elif (BFIN_CPU == ADSP_BF536)
-#define CFG_PROMPT "serial_bf536> " /* Monitor Command Prompt */
-#else
-#define CFG_PROMPT "serial_bf537> " /* Monitor Command Prompt */
-#endif
-#else
-#if (BFIN_CPU == ADSP_BF534)
-#define CFG_PROMPT "bf534> " /* Monitor Command Prompt */
-#elif (BFIN_CPU == ADSP_BF536)
-#define CFG_PROMPT "bf536> " /* Monitor Command Prompt */
-#else
-#define CFG_PROMPT "bf537> " /* Monitor Command Prompt */
-#endif
-#endif
+#define CFG_PROMPT "bfin> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
@@ -302,6 +286,11 @@
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0x20000000
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CFG_FLASH_PROTECTION
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 71 /* some have 67 sectors (M29W320DB), but newer have 71 (M29W320EB) */
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)
@@ -311,10 +300,6 @@
#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4)
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
-
#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_UART_BOOT)
/* for bf537-stamp, usrt boot mode still store env in flash */
#define CFG_ENV_IS_IN_FLASH 1
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 2966260..c29555a 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -5,6 +5,8 @@
#ifndef __CONFIG_EZKIT561_H__
#define __CONFIG_EZKIT561_H__
+#include <asm/blackfin-config-pre.h>
+
#define CONFIG_VDSP 1
#define CONFIG_BF561 1
@@ -18,6 +20,8 @@
#define CONFIG_PANIC_HANG 1
+#define CONFIG_BFIN_CPU bf561-0.3
+
/*
* Boot Mode Set
* Blackfin can support several boot modes
@@ -216,7 +220,7 @@
*/
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */
+#define CFG_PROMPT "bfin> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
new file mode 100644
index 0000000..a4bcc65
--- /dev/null
+++ b/include/configs/canyonlands.h
@@ -0,0 +1,567 @@
+/*
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * canyonlands.h - configuration for Canyonlands (460EX)
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_CANYONLANDS 1 /* Board is Canyonlands */
+#define CONFIG_440 1
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_460EX 1 /* Specific PPC460EX support */
+
+#define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped PCI memory */
+#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
+#define CFG_PCI_TARGBASE CFG_PCI_MEMBASE
+
+#define CFG_PCIE_MEMBASE 0xb0000000 /* mapped PCIe memory */
+#define CFG_PCIE_MEMSIZE 0x08000000 /* smallest incr for PCIe port */
+#define CFG_PCIE_BASE 0xc4000000 /* PCIe UTL regs */
+
+#define CFG_PCIE0_CFGBASE 0xc0000000
+#define CFG_PCIE1_CFGBASE 0xc1000000
+#define CFG_PCIE0_XCFGBASE 0xc3000000
+#define CFG_PCIE1_XCFGBASE 0xc3001000
+
+#define CFG_PCIE0_UTLBASE 0xc08010000ULL /* 36bit physical addr */
+
+/* base address of inbound PCIe window */
+#define CFG_PCIE_INBOUND_BASE 0x000000000ULL /* 36bit physical addr */
+
+/* EBC stuff */
+#define CFG_NAND_ADDR 0xE0000000
+#define CFG_BCSR_BASE 0xE1000000
+#define CFG_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space: 0xFF000000 */
+#define CFG_FLASH_BASE 0xFC000000 /* later mapped to this addr */
+#define CFG_FLASH_BASE_PHYS_H 0x4
+#define CFG_FLASH_BASE_PHYS_L 0xCC000000
+#define CFG_FLASH_BASE_PHYS (((u64)CFG_FLASH_BASE_PHYS_H << 32) | \
+ (u64)CFG_FLASH_BASE_PHYS_L)
+#define CFG_FLASH_SIZE (64 << 20)
+
+#define CFG_OCM_BASE 0xE3000000 /* OCM: 16k */
+#define CFG_SRAM_BASE 0xE8000000 /* SRAM: 256k */
+#define CFG_LOCAL_CONF_REGS 0xEF000000
+
+#define CFG_PERIPHERAL_BASE 0xEF600000 /* internal peripherals */
+
+#define CFG_AHB_BASE 0xE2000000 /* internal AHB peripherals */
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
+#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc()*/
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in OCM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */
+#define CFG_INIT_RAM_END (4 << 10)
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI 1
+#undef CONFIG_UART1_CONSOLE /* define this if you want console on UART1 */
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+/*
+ * Define here the location of the environment variables (FLASH).
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
+#else
+#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
+#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
+#endif
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller. sr - 2006-08-25
+ */
+#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
+#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
+#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_BASE + (12 << 10)) /* Copy SPL here */
+#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */
+#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from */
+ /* this addr */
+#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */
+#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */
+#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
+#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */
+#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */
+#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */
+
+#define CFG_NAND_ECCSIZE 256
+#define CFG_NAND_ECCBYTES 3
+#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+#define CFG_NAND_OOBSIZE 16
+#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
+
+#ifdef CFG_ENV_IS_IN_NAND
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/canyonlands/u-boot-nand.lds for details.
+ */
+#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE
+#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CFG_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*-----------------------------------------------------------------------
+ * NAND-FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS)
+#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
+
+/*------------------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------------*/
+#if !defined(CONFIG_NAND_U_BOOT)
+/*
+ * NAND booting U-Boot version uses a fixed initialization, since the whole
+ * I2C SPD DIMM autodetection/calibration doesn't fit into the 4k of boot
+ * code.
+ */
+#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
+#define SPD_EEPROM_ADDRESS {0x50, 0x51} /* SPD i2c spd addresses*/
+#define CONFIG_DDR_ECC 1 /* with ECC support */
+#define CONFIG_DDR_RQDC_FIXED 0x80000038 /* fixed value for RQDC */
+#endif
+#define CFG_MBYTES_SDRAM 256 /* 256MB */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible) */
+#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
+#define CONFIG_DTT_AD7414 1 /* use AD7414 */
+#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
+#define CFG_DTT_MAX_TEMP 70
+#define CFG_DTT_LOW_TEMP -30
+#define CFG_DTT_HYSTERESIS 3
+
+/* RTC configuration */
+#define CONFIG_RTC_M41T62 1
+#define CFG_I2C_RTC_ADDR 0x68
+
+/*-----------------------------------------------------------------------
+ * Ethernet
+ *----------------------------------------------------------------------*/
+#define CONFIG_IBM_EMAC4_V4 1
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
+#define CONFIG_PHY1_ADDR 1
+#define CONFIG_HAS_ETH0 1
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_NET_MULTI 1
+
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#define CONFIG_PHY_DYNAMIC_ANEG 1
+
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+/*-----------------------------------------------------------------------
+ * USB-OHCI
+ *----------------------------------------------------------------------*/
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_STORAGE
+#undef CFG_OHCI_BE_CONTROLLER /* 460EX has little endian descriptors */
+#define CFG_OHCI_SWAP_REG_ACCESS /* 460EX has little endian register */
+#define CFG_OHCI_USE_NPS /* force NoPowerSwitching mode */
+#define CFG_USB_OHCI_REGS_BASE (CFG_AHB_BASE | 0xd0000)
+#define CFG_USB_OHCI_SLOT_NAME "ppc440"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
+/*-----------------------------------------------------------------------
+ * Default environment
+ *----------------------------------------------------------------------*/
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=canyonlands\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "net_nfs=tftp 200000 ${bootfile};" \
+ "run nfsargs addip addtty;" \
+ "bootm 200000\0" \
+ "net_nfs_fdt=tftp 200000 ${bootfile};" \
+ "tftp ${fdt_addr} ${fdt_file};" \
+ "run nfsargs addip addtty;" \
+ "bootm 200000 - ${fdt_addr}\0" \
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "rootpath=/opt/eldk/ppc_4xxFP\0" \
+ "bootfile=canyonlands/uImage\0" \
+ "fdt_file=canyonlands/canyonlands.dtb\0" \
+ "fdt_addr=400000\0" \
+ "kernel_addr=fc000000\0" \
+ "ramdisk_addr=fc200000\0" \
+ "initrd_high=30000000\0" \
+ "load=tftp 200000 canyonlands/u-boot.bin\0" \
+ "update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \
+ "cp.b ${fileaddr} fffa0000 ${filesize};" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load update\0" \
+ "nload=tftp 200000 canyonlands/u-boot-nand.bin\0" \
+ "nupdate=nand erase 0 60000;nand write 200000 0 60000;" \
+ "setenv filesize;saveenv\0" \
+ "nupd=run nload nupdate\0" \
+ "pciconfighost=1\0" \
+ "pcie_mode=RP:RP\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_SUBNETMASK
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_USB
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
+
+#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/* Board-specific PCI */
+#define CFG_PCI_TARGET_INIT /* let board init pci target */
+#undef CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Internal Definitions
+ */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+
+/*
+ * Canyonlands has 64MBytes of NOR FLASH (Spansion 29GL512), but the
+ * boot EBC mapping only supports a maximum of 16MBytes
+ * (4.ff00.0000 - 4.ffff.ffff).
+ * To solve this problem, the FLASH has to get remapped to another
+ * EBC address which accepts bigger regions:
+ *
+ * 0xfc00.0000 -> 4.cc00.0000
+ */
+
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+/* Memory Bank 3 (NOR-FLASH) initialization */
+#define CFG_EBC_PB3AP 0x10055e00
+#define CFG_EBC_PB3CR (CFG_BOOT_BASE_ADDR | 0x9a000)
+
+/* Memory Bank 0 (NAND-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x018003c0
+#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1E000) /* BAS=NAND,BS=1MB,BU=R/W,BW=32bit*/
+#else
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x10055e00
+#define CFG_EBC_PB0CR (CFG_BOOT_BASE_ADDR | 0x9a000)
+
+/* Memory Bank 3 (NAND-FLASH) initialization */
+#define CFG_EBC_PB3AP 0x018003c0
+#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1E000) /* BAS=NAND,BS=1MB,BU=R/W,BW=32bit*/
+#endif
+
+/* Memory Bank 2 (CPLD) initialization */
+#define CFG_EBC_PB2AP 0x00804240
+#define CFG_EBC_PB2CR (CFG_BCSR_BASE | 0x18000) /* BAS=CPLD,BS=1M,BU=RW,BW=32bit */
+
+#define CFG_EBC_CFG 0xB8400000 /* EBC0_CFG */
+
+/*
+ * PPC4xx GPIO Configuration
+ */
+#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
+{ \
+/* GPIO Core 0 */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0) USB2HostD(0) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1) USB2HostD(1) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2) USB2HostD(2) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3) USB2HostD(3) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4) USB2HostD(4) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5) USB2HostD(5) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6) USB2HostD(6) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7) USB2HostD(7) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0) USB2OTGD(0) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1) USB2OTGD(1) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2) USB2OTGD(2) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3) USB2OTGD(3) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4) USB2OTGD(4) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5) USB2OTGD(5) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6) USB2OTGD(6) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7) USB2OTGD(7) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL, GPIO_OUT_0}, /* GPIO16 GMC1TxER USB2HostStop */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD USB2HostNext */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER USB2HostDir */ \
+{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO19 GMC1TxEN USB2OTGStop */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS USB2OTGNext */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV USB2OTGDir */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0 DMAReq2 IRQ(7)*/ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1 DMAAck2 IRQ(8)*/ \
+}, \
+{ \
+/* GPIO Core 1 */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2 EOT2/TC2 IRQ(9)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3 DMAReq3 IRQ(4)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3 UART3_SIN*/ \
+{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EOT3/TC3 UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4) DMAAck1 IRQ(11)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5) EOT/TC1 IRQ(12)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5) DMAReq0 IRQ(13)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6) DMAAck0 IRQ(14)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7) EOT/TC0 IRQ(15)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
+} \
+}
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h
index 5a85feb..4ecaf90 100644
--- a/include/configs/hcu4.h
+++ b/include/configs/hcu4.h
@@ -1,5 +1,5 @@
/*
- *(C) Copyright 2005-2007 Netstal Maschinen AG
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
* Niklaus Giger (Niklaus.Giger@netstal.com)
*
* See file CREDITS for list of people who contributed to this
@@ -103,14 +103,20 @@
* Flash
*----------------------------------------------------------------------*/
+/* Use common CFI driver */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+/* board provides its own flash_init code */
+#define CONFIG_FLASH_CFI_LEGACY 1
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+#define CFG_FLASH_LEGACY_512Kx8 1
+
+/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_EMPTY_INFO
+
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
-#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index 2ed8530..f5f1197 100644
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -349,12 +349,20 @@
* Flash
*----------------------------------------------------------------------*/
+/* Use common CFI driver */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+/* board provides its own flash_init code */
+#define CONFIG_FLASH_CFI_LEGACY 1
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+#define CFG_FLASH_LEGACY_512Kx8 1
+
+/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_EMPTY_INFO
+
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index c3f10c7..ced7ba6 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -36,6 +36,7 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+#define CONFIG_BOARD_RESET 1 /* Call board_reset */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
@@ -86,6 +87,15 @@
#define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6)
/* unused GPT0 COMP reg */
+/* Additional registers for watchdog timer post test */
+
+#define CFG_DSPIC_TEST_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP5)
+#define CFG_WATCHDOG_TIME_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP4)
+#define CFG_WATCHDOG_FLAGS_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP5)
+#define CFG_WATCHDOG_MAGIC 0x12480000
+#define CFG_WATCHDOG_MAGIC_MASK 0xFFFF0000
+#define CFG_DSPIC_TEST_MASK 0x00000001
+
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
@@ -156,10 +166,86 @@
CFG_POST_MEMORY | \
CFG_POST_RTC | \
CFG_POST_SPR | \
- CFG_POST_UART)
+ CFG_POST_UART | \
+ CFG_POST_SYSMON | \
+ CFG_POST_WATCHDOG | \
+ CFG_POST_DSP | \
+ CFG_POST_BSPEC1 | \
+ CFG_POST_BSPEC2 | \
+ CFG_POST_BSPEC3 | \
+ CFG_POST_BSPEC4 | \
+ CFG_POST_BSPEC5)
+
+#define CONFIG_POST_WATCHDOG {\
+ "Watchdog timer test", \
+ "watchdog", \
+ "This test checks the watchdog timer.", \
+ POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT, \
+ &lwmon5_watchdog_post_test, \
+ NULL, \
+ NULL, \
+ CFG_POST_WATCHDOG \
+ }
+
+#define CONFIG_POST_BSPEC1 {\
+ "dsPIC init test", \
+ "dspic_init", \
+ "This test returns result of dsPIC READY test run earlier.", \
+ POST_RAM | POST_ALWAYS, \
+ &dspic_init_post_test, \
+ NULL, \
+ NULL, \
+ CFG_POST_BSPEC1 \
+ }
+
+#define CONFIG_POST_BSPEC2 {\
+ "dsPIC test", \
+ "dspic", \
+ "This test gets result of dsPIC POST and dsPIC version.", \
+ POST_RAM | POST_ALWAYS, \
+ &dspic_post_test, \
+ NULL, \
+ NULL, \
+ CFG_POST_BSPEC2 \
+ }
+
+#define CONFIG_POST_BSPEC3 {\
+ "FPGA test", \
+ "fpga", \
+ "This test checks FPGA registers and memory.", \
+ POST_RAM | POST_ALWAYS, \
+ &fpga_post_test, \
+ NULL, \
+ NULL, \
+ CFG_POST_BSPEC3 \
+ }
+
+#define CONFIG_POST_BSPEC4 {\
+ "GDC test", \
+ "gdc", \
+ "This test checks GDC registers and memory.", \
+ POST_RAM | POST_ALWAYS, \
+ &gdc_post_test, \
+ NULL, \
+ NULL, \
+ CFG_POST_BSPEC4 \
+ }
+
+#define CONFIG_POST_BSPEC5 {\
+ "SYSMON1 test", \
+ "sysmon1", \
+ "This test checks GPIO_62_EPX pin indicating power failure.", \
+ POST_RAM | POST_MANUAL | POST_NORMAL | POST_SLOWTEST, \
+ &sysmon1_post_test, \
+ NULL, \
+ NULL, \
+ CFG_POST_BSPEC5 \
+ }
#define CFG_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */
#define CONFIG_LOGBUFFER
+#define CONFIG_ALT_LH_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP1)
+#define CONFIG_ALT_LB_ADDR (CFG_OCM_BASE)
#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
/*-----------------------------------------------------------------------
@@ -181,6 +267,7 @@
#define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */
#define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */
#define CFG_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */
+#define CFG_I2C_DSPIC_IO_ADDR 0x57 /* PIC I/O addr */
#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */
#if 0
@@ -366,9 +453,6 @@
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
-/*
- * ToDo: Watchdog is not test fully, so exclude it for now
- */
#define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */
#define CONFIG_WD_PERIOD 40000 /* in usec */
@@ -431,10 +515,14 @@
#define CFG_GPIO_PHY1_RST 12
#define CFG_GPIO_FLASH_WP 14
#define CFG_GPIO_PHY0_RST 22
+#define CFG_GPIO_DSPIC_READY 51
#define CFG_GPIO_EEPROM_EXT_WP 55
+#define CFG_GPIO_HIGHSIDE 56
#define CFG_GPIO_EEPROM_INT_WP 57
+#define CFG_GPIO_BOARD_RESET 58
#define CFG_GPIO_LIME_S 59
#define CFG_GPIO_LIME_RST 60
+#define CFG_GPIO_SYSMON_STATUS 62
#define CFG_GPIO_WATCHDOG 63
/*-----------------------------------------------------------------------
diff --git a/include/configs/mcu25.h b/include/configs/mcu25.h
new file mode 100644
index 0000000..c5b6e8f
--- /dev/null
+++ b/include/configs/mcu25.h
@@ -0,0 +1,361 @@
+/*
+ *(C) Copyright 2005-2007 Netstal Maschinen AG
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * mcu25.h - configuration for MCU25 board (similar to hcu4.h)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_MCU25 1 /* Board is MCU25 */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_405GP 1
+#define CONFIG_4xx 1
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+*----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Monitor */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
+
+
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE
+
+/* ... with on-chip memory here (4KBytes) */
+#define CFG_OCM_DATA_ADDR 0xF4000000
+#define CFG_OCM_DATA_SIZE 0x00001000
+/* Do not set up locked dcache as init ram. */
+#undef CFG_INIT_DCACHE_CS
+
+/* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */
+#define CFG_TEMP_STACK_OCM 1
+
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* OCM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+/*
+ * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * The Linux BASE_BAUD define should match this configuration.
+ * baseBaud = cpuClock/(uartDivisor*16)
+ * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * set Linux BASE_BAUD to 403200.
+ */
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#define CONFIG_SERIAL_MULTI 1
+/* needed to be able to define CONFIG_SERIAL_SOFTWARE_FIFO */
+#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#define CFG_BASE_BAUD 691200
+
+/* Size (bytes) of interrupt driven serial port buffer.
+ * Set to 0 to use polling instead of interrupts.
+ * Setting to 0 will also disable RTS/CTS handshaking.
+ */
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+
+/* Set console baudrate to 9600 */
+#define CONFIG_BAUDRATE 9600
+
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Flash
+ *----------------------------------------------------------------------*/
+
+/* Use common CFI driver */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+/* board provides its own flash_init code */
+#define CONFIG_FLASH_CFI_LEGACY 1
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+#define CFG_FLASH_LEGACY_512Kx8 1
+
+/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_EMPTY_INFO
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+
+#undef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_NOWHERE
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+/* Put the environment after the SDRAM configuration */
+#define PROM_SIZE 2048
+#define CFG_ENV_OFFSET 512
+#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET)
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+/* Put the environment in Flash */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 8*1024 /* 8 KB Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the
+ * the first internal I2C controller of the PPC440EPx
+ *----------------------------------------------------------------------*/
+#define CFG_SPD_BUS_NUM 0
+
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/* This is the 7bit address of the device, not including P. */
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+
+/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#undef CFG_I2C_MULTI_EEPROMS
+
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+/* Setup some board specific values for the default environment variables */
+#define CONFIG_HOSTNAME mcu25
+#define CONFIG_IPADDR 172.25.1.99
+#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+#define CONFIG_SERVERIP 172.25.1.3
+
+#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "loadaddr=0x01000000\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/home/diagnose/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/mcu25/uImage\0" \
+ "load=tftp 100000 mcu25/u-boot.bin\0" \
+ "update=protect off FFFB0000 FFFFFFFF;era FFFB0000 FFFFFFFF;" \
+ "cp.b 100000 FFFB0000 50000\0" \
+ "upd=run load;run update\0" \
+ "vx_rom=mcu25/mcu25_vx_rom\0" \
+ "vx=tftp ${loadaddr} ${vx_rom};run vxargs; bootvx\0" \
+ "vxargs=setenv bootargs emac(0,0)c:${vx_rom} e=${ipaddr}" \
+ " h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run vx"
+
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 1 /* PHY address */
+
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descr */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
+/* SPD EEPROM (sdram speed config) disabled */
+#define CONFIG_SPD_EEPROM 1
+#define SPD_EEPROM_ADDRESS 0x50
+
+/* POST support */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_UART | \
+ CFG_POST_I2C | \
+ CFG_POST_CACHE | \
+ CFG_POST_ETHER | \
+ CFG_POST_SPR)
+
+#define CFG_POST_UART_TABLE {UART0_BASE}
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
+#undef CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+#define CFG_EBC_CFG 0x98400000
+
+/* Memory Bank 0 (Flash Bank 0) initialization */
+#define CFG_EBC_PB0AP 0x02005400
+#define CFG_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit*/
+
+#define CFG_EBC_PB1AP 0x03041200
+#define CFG_EBC_PB1CR 0x7009A000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+
+#define CFG_EBC_PB2AP 0x01845200u /* BAS=,BS=MB,BU=R/W,BW=bit */
+#define CFG_EBC_PB2CR 0x7A09A000u
+
+#define CFG_EBC_PB3AP 0x01845200u /* BAS=,BS=MB,BU=R/W,BW=bit */
+#define CFG_EBC_PB3CR 0x7B09A000u
+
+#define CFG_EBC_PB4AP 0x01845200u /* BAS=,BS=MB,BU=R/W,BW=bit */
+#define CFG_EBC_PB4CR 0x7C09A000u
+
+#define CFG_EBC_PB5AP 0x00800200u
+#define CFG_EBC_PB5CR 0x7D81A000u
+
+#define CFG_EBC_PB6AP 0x01040200u
+#define CFG_EBC_PB6CR 0x7D91A000u
+
+#define CFG_GPIO0_OR 0x087FFFFF /* GPIO value */
+#define CFG_GPIO0_TCR 0x7FFF8000 /* GPIO value */
+#define CFG_GPIO0_ODR 0xFFFF0000 /* GPIO value */
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/* Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
+
+
+/* Configuration Port location */
+#define CONFIG_PORT_ADDR 0xF0000500
+
+#define CFG_HUSH_PARSER /* use "hush" command parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index 98facf2..b1e3d53 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -105,12 +105,11 @@
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
- "addcon=setenv bootargs ${bootargs} console=ttyCPM0,,${baudrate}\0" \
+ "addcon=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:${netdev}:off panic=1 " \
- "console=${console}\0" \
+ "${netmask}:${hostname}:${netdev}:off panic=1\0" \
"net_nfs=tftp ${kernel_addr} ${bootfile}; " \
"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcon;"\
"bootm ${kernel_addr} - ${fdt_addr}\0" \
diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h
index b035857..f12765d 100644
--- a/include/configs/stxxtc.h
+++ b/include/configs/stxxtc.h
@@ -594,7 +594,5 @@
#define OF_CPU "PowerPC,MPC870@0"
#define OF_TBCLK (MPC8XX_HZ / 16)
-#define CONFIG_OF_HAS_BD_T 1
-#define CONFIG_OF_HAS_UBOOT_ENV 1
#endif /* __CONFIG_H */
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 7836f28..890993f 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -50,13 +50,11 @@
const void *val, int len, int create);
void fdt_fixup_qe_firmware(void *fdt);
-#ifdef CONFIG_OF_HAS_UBOOT_ENV
-int fdt_env(void *fdt);
-#endif
-
-#ifdef CONFIG_OF_HAS_BD_T
-int fdt_bd_t(void *fdt);
-#endif
+#ifdef CONFIG_HAS_FSL_DR_USB
+void fdt_fixup_dr_usb(void *blob, bd_t *bd);
+#else
+static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
+#endif /* CONFIG_HAS_FSL_DR_USB */
#ifdef CONFIG_OF_BOARD_SETUP
void ft_board_setup(void *blob, bd_t *bd);
diff --git a/include/libfdt.h b/include/libfdt.h
index 3a64d0b..beeacb2 100644
--- a/include/libfdt.h
+++ b/include/libfdt.h
@@ -852,6 +852,32 @@
int fdt_del_mem_rsv(void *fdt, int n);
/**
+ * fdt_set_name - change the name of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of a node
+ * @name: name to give the node
+ *
+ * fdt_set_name() replaces the name (including unit address, if any)
+ * of the given node with the given string. NOTE: this function can't
+ * efficiently check if the new name is unique amongst the given
+ * node's siblings; results are undefined if this function is invoked
+ * with a name equal to one of the given node's siblings.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob
+ * to contain the new name
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_set_name(void *fdt, int nodeoffset, const char *name);
+
+/**
* fdt_setprop - create or change a property
* @fdt: pointer to the device tree blob
* @nodeoffset: offset of the node whose property to change
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index df052e3..4ee38aa 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -121,6 +121,7 @@
#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority */
#define SPCR_PCIPR_SHIFT (31-7)
#define SPCR_OPT 0x00800000 /* Optimize */
+#define SPCR_OPT_SHIFT (31-8)
#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable */
#define SPCR_TBEN_SHIFT (31-9)
#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority */
@@ -880,7 +881,7 @@
#define TIMING_CFG0_PRE_PD_EXIT_SHIFT 16
#define TIMING_CFG0_ODT_PD_EXIT 0x00000F00
#define TIMING_CFG0_ODT_PD_EXIT_SHIFT 8
-#define TIMING_CFG0_MRS_CYC 0x00000F00
+#define TIMING_CFG0_MRS_CYC 0x0000000F
#define TIMING_CFG0_MRS_CYC_SHIFT 0
/* TIMING_CFG_1 - DDR SDRAM Timing Configuration 1
@@ -903,6 +904,7 @@
#define TIMING_CFG1_WRTORD_SHIFT 0
#define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */
#define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */
+#define TIMING_CFG1_CASLAT_30 0x00050000 /* CAS latency = 2.5 */
/* TIMING_CFG_2 - DDR SDRAM Timing Configuration 2
*/
diff --git a/include/post.h b/include/post.h
index c8062bb..ee07d2c 100644
--- a/include/post.h
+++ b/include/post.h
@@ -42,12 +42,16 @@
#define POST_REBOOT 0x0800 /* test may cause rebooting */
#define POST_PREREL 0x1000 /* test runs before relocation */
+#define POST_CRITICAL 0x2000 /* Use failbootcmd if test failed */
+
#define POST_MEM (POST_RAM | POST_ROM)
#define POST_ALWAYS (POST_NORMAL | \
POST_SLOWTEST | \
POST_MANUAL | \
POST_POWERON )
+#define POST_FAIL_SAVE 0x80
+
#ifndef __ASSEMBLY__
struct post_test {
@@ -93,6 +97,11 @@
#define CFG_POST_CODEC 0x00002000
#define CFG_POST_FPU 0x00004000
#define CFG_POST_ECC 0x00008000
+#define CFG_POST_BSPEC1 0x00010000
+#define CFG_POST_BSPEC2 0x00020000
+#define CFG_POST_BSPEC3 0x00040000
+#define CFG_POST_BSPEC4 0x00080000
+#define CFG_POST_BSPEC5 0x00100000
#endif /* CONFIG_POST */
diff --git a/include/ppc405.h b/include/ppc405.h
index cbfe89e..37b121c 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -118,7 +118,17 @@
/******************************************************************************
* Universal interrupt controller
******************************************************************************/
+#define UIC_SR 0x0 /* UIC status */
+#define UIC_ER 0x2 /* UIC enable */
+#define UIC_CR 0x3 /* UIC critical */
+#define UIC_PR 0x4 /* UIC polarity */
+#define UIC_TR 0x5 /* UIC triggering */
+#define UIC_MSR 0x6 /* UIC masked status */
+#define UIC_VR 0x7 /* UIC vector */
+#define UIC_VCR 0x8 /* UIC vector configuration */
+
#define UIC_DCR_BASE 0xc0
+#define UIC0_DCR_BASE UIC_DCR_BASE
#define uicsr (UIC_DCR_BASE+0x0) /* UIC status */
#define uicsrs (UIC_DCR_BASE+0x1) /* UIC status set */
#define uicer (UIC_DCR_BASE+0x2) /* UIC enable */
@@ -141,6 +151,7 @@
#define uic0vcr uicvcr /* UIC vector configuration*/
#define UIC_DCR_BASE1 0xd0
+#define UIC1_DCR_BASE 0xd0
#define uic1sr (UIC_DCR_BASE1+0x0) /* UIC status */
#define uic1srs (UIC_DCR_BASE1+0x1) /* UIC status set */
#define uic1er (UIC_DCR_BASE1+0x2) /* UIC enable */
@@ -152,6 +163,7 @@
#define uic1vcr (UIC_DCR_BASE1+0x8) /* UIC vector configuration*/
#define UIC_DCR_BASE2 0xe0
+#define UIC2_DCR_BASE 0xe0
#define uic2sr (UIC_DCR_BASE2+0x0) /* UIC status */
#define uic2srs (UIC_DCR_BASE2+0x1) /* UIC status set */
#define uic2er (UIC_DCR_BASE2+0x2) /* UIC enable */
@@ -237,10 +249,13 @@
#define UIC_ENET1 0x00000040 /* */
#define UIC_PCIEMSI2 0x00000020 /* */
#define UIC_EIRQ4 0x00000010 /**/
-#define UIC_UIC2NC 0x00000008 /* */
-#define UIC_UIC2C 0x00000004 /* */
-#define UIC_UIC1NC 0x00000002 /* */
-#define UIC_UIC1C 0x00000001 /* */
+#define UICB0_UIC2NCI 0x00000008 /* */
+#define UICB0_UIC2CI 0x00000004 /* */
+#define UICB0_UIC1NCI 0x00000002 /* */
+#define UICB0_UIC1CI 0x00000001 /* */
+
+#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
+ UICB0_UIC1CI | UICB0_UIC2NCI)
#define UIC_MAL_TXEOB UIC_MTE/* MAL TXEOB */
#define UIC_MAL_RXEOB UIC_MRE/* MAL RXEOB */
diff --git a/include/ppc440.h b/include/ppc440.h
index 907744b..10517cb 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -380,7 +380,8 @@
#define SDR0_PEGPLLSTS 0x000003A2 /* PE Pll LC Tank Status */
#endif /* CONFIG_440SPE */
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
/*----------------------------------------------------------------------------+
| SDRAM Controller
+----------------------------------------------------------------------------*/
@@ -416,7 +417,8 @@
/*-----------------------------------------------------------------------------+
| Memory Bank 0-7 configuration
+-----------------------------------------------------------------------------*/
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */
#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFFE00000)>>2)
#define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFFE00000)<<2)
@@ -692,6 +694,7 @@
#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
#define SDRAM_CLKTR_CLKP_90_DEG_ADV 0x40000000
+#define SDRAM_CLKTR_CLKP_270_DEG_ADV 0xC0000000
/*-----------------------------------------------------------------------------+
| SDRAM Write Timing Register
@@ -1428,6 +1431,11 @@
#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
#define GPT0_COMP6 0x00000098
+#define GPT0_COMP5 0x00000094
+#define GPT0_COMP4 0x00000090
+#define GPT0_COMP3 0x0000008C
+#define GPT0_COMP2 0x00000088
+#define GPT0_COMP1 0x00000084
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define SDR0_USB2D0CR 0x0320
@@ -1577,49 +1585,6 @@
#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
-/* CUST0 Customer Configuration Register0 */
-#define SDR0_CUST0 0x4000
-#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
-#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
-#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
-#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
-
-#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
-#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
-#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
-
-#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
-#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
-#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
-
-#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
-#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
-#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
-
-#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
-#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22)
-#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
-
-#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
-
-#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
-#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
-#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
-
-#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
-#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
-#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF)
-
-#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
-#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
-#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Select Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
-
/* CUST1 Customer Configuration Register1 */
#define SDR0_CUST1 0x4002
#define SDR0_CUST1_NDRSC_MASK 0xFFFF0000 /* NDRSC Device Read Count */
@@ -1666,25 +1631,34 @@
#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */
#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */
+#endif /* 440EP || 440GR || 440EPX || 440GRX */
+
+/*-----------------------------------------------------------------------------
+ | L2 Cache
+ +----------------------------------------------------------------------------*/
+#if defined (CONFIG_440GX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define L2_CACHE_BASE 0x030
+#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */
+#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */
+#define l2_cache_addr (L2_CACHE_BASE+0x02) /* L2 Cache Address */
+#define l2_cache_data (L2_CACHE_BASE+0x03) /* L2 Cache Data */
+#define l2_cache_stat (L2_CACHE_BASE+0x04) /* L2 Cache Status */
+#define l2_cache_cver (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */
+#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */
+#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
+
+#endif /* CONFIG_440GX */
+
/*-----------------------------------------------------------------------------
| Internal SRAM
+----------------------------------------------------------------------------*/
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define ISRAM0_DCR_BASE 0x380
-#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
-#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
-#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
-#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
-#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
-#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
-#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
-#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
-
#else
-
-/*-----------------------------------------------------------------------------
- | Internal SRAM
- +----------------------------------------------------------------------------*/
#define ISRAM0_DCR_BASE 0x020
+#endif
#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
#define isram0_sb1cr (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/
#define isram0_sb2cr (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/
@@ -1697,22 +1671,52 @@
#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
-/*-----------------------------------------------------------------------------
- | L2 Cache
- +----------------------------------------------------------------------------*/
-#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define L2_CACHE_BASE 0x030
-#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */
-#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */
-#define l2_cache_addr (L2_CACHE_BASE+0x02) /* L2 Cache Address */
-#define l2_cache_data (L2_CACHE_BASE+0x03) /* L2 Cache Data */
-#define l2_cache_stat (L2_CACHE_BASE+0x04) /* L2 Cache Status */
-#define l2_cache_cver (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */
-#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */
-#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+/* CUST0 Customer Configuration Register0 */
+#define SDR0_CUST0 0x4000
+#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
+#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
+#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
+#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
-#endif /* CONFIG_440GX */
-#endif /* !CONFIG_440EP !CONFIG_440GR*/
+#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
+#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
+#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
+
+#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
+#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
+#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
+
+#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
+#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
+#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
+
+#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
+#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22)
+#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
+
+#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
+
+#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
+#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
+#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
+
+#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
+#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
+#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF)
+
+#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
+#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
+#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Select Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
+#endif
/*-----------------------------------------------------------------------------
| On-Chip Buses
@@ -1722,8 +1726,14 @@
/*-----------------------------------------------------------------------------
| Clocking, Power Management and Chip Control
+----------------------------------------------------------------------------*/
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define CNTRL_DCR_BASE 0x160
+#else
#define CNTRL_DCR_BASE 0x0b0
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#endif
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */
#define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */
#define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */
@@ -1751,6 +1761,15 @@
/*-----------------------------------------------------------------------------
| Universal interrupt controller
+----------------------------------------------------------------------------*/
+#define UIC_SR 0x0 /* UIC status */
+#define UIC_ER 0x2 /* UIC enable */
+#define UIC_CR 0x3 /* UIC critical */
+#define UIC_PR 0x4 /* UIC polarity */
+#define UIC_TR 0x5 /* UIC triggering */
+#define UIC_MSR 0x6 /* UIC masked status */
+#define UIC_VR 0x7 /* UIC vector */
+#define UIC_VCR 0x8 /* UIC vector configuration */
+
#define UIC0_DCR_BASE 0xc0
#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */
#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */
@@ -1771,7 +1790,9 @@
#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define UIC2_DCR_BASE 0xe0
#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */
#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */
@@ -1927,7 +1948,11 @@
/*-----------------------------------------------------------------------------
| DMA
+----------------------------------------------------------------------------*/
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define DMA_DCR_BASE 0x200
+#else
#define DMA_DCR_BASE 0x100
+#endif
#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
#define dmasah0 (DMA_DCR_BASE+0x02) /* DMA source address high 0 */
@@ -1991,15 +2016,16 @@
#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
-#if defined(CONFIG_440GX)
-#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */
-#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */
-#endif /* CONFIG_440GX */
#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */
+#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */
+#define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table pointer reg */
#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */
#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */
+#define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */
#endif /* CONFIG_440GX */
@@ -2112,6 +2138,41 @@
#define UIC_MAL_TXEOB UIC_MTE
#define UIC_MAL_RXEOB UIC_MRE
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
+#define UIC_RSVD0 0x80000000 /* N/A - unused */
+#define UIC_U1 0x40000000 /* UART 1 */
+#define UIC_IIC0 0x20000000 /* IIC */
+#define UIC_IIC1 0x10000000 /* IIC */
+#define UIC_PIM 0x08000000 /* PCI inbound message */
+#define UIC_PCRW 0x04000000 /* PCI command register write */
+#define UIC_PPM 0x02000000 /* PCI power management */
+#define UIC_PCIVPD 0x01000000 /* PCI VPD */
+#define UIC_MSI0 0x00800000 /* PCI MSI level 0 */
+#define UIC_EIR0 0x00400000 /* External interrupt 0 */
+#define UIC_UIC2NC 0x00200000 /* UIC2 non-critical interrupt */
+#define UIC_UIC2C 0x00100000 /* UIC2 critical interrupt */
+#define UIC_D0 0x00080000 /* DMA channel 0 */
+#define UIC_D1 0x00040000 /* DMA channel 1 */
+#define UIC_D2 0x00020000 /* DMA channel 2 */
+#define UIC_D3 0x00010000 /* DMA channel 3 */
+#define UIC_UIC3NC 0x00008000 /* UIC3 non-critical interrupt */
+#define UIC_UIC3C 0x00004000 /* UIC3 critical interrupt */
+#define UIC_EIR1 0x00002000 /* External interrupt 1 */
+#define UIC_TRNGDA 0x00001000 /* TRNG data available */
+#define UIC_PKAR1 0x00000800 /* PKA ready (PKA[1]) */
+#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */
+#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */
+#define UIC_I2OID 0x00000100 /* I2O inbound door bell */
+#define UIC_I2OLNE 0x00000080 /* I2O Inbound Post List FIFO Not Empty */
+#define UIC_I20R0LL 0x00000040 /* I2O Region 0 Low Latency PLB Write */
+#define UIC_I2OR1LL 0x00000020 /* I2O Region 1 Low Latency PLB Write */
+#define UIC_I20R0HB 0x00000010 /* I2O Region 0 High Bandwidth PLB Write */
+#define UIC_I2OR1HB 0x00000008 /* I2O Region 1 High Bandwidth PLB Write */
+#define UIC_EIP94 0x00000004 /* Security EIP94 */
+#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
+#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
+
#elif !defined(CONFIG_440SPE)
#define UIC_U0 0x80000000 /* UART 0 */
#define UIC_U1 0x40000000 /* UART 1 */
@@ -2221,6 +2282,41 @@
#define UIC_ETH1 0x00000002 /* Ethernet 1 */
#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
+#define UIC_EIR2 0x80000000 /* External interrupt 2 */
+#define UIC_U0 0x40000000 /* UART 0 */
+#define UIC_SPI 0x20000000 /* SPI */
+#define UIC_TRNGAL 0x10000000 /* TRNG alarm */
+#define UIC_DEUE 0x08000000 /* DDR SDRAM ECC correct/uncorrectable error */
+#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
+#define UIC_NDFC 0x02000000 /* NDFC */
+#define UIC_EIPPKPSE 0x01000000 /* EIPPKP slave error */
+#define UIC_P0MSI1 0x00800000 /* PCI0 MSI level 1 */
+#define UIC_P0MSI2 0x00400000 /* PCI0 MSI level 2 */
+#define UIC_P0MSI3 0x00200000 /* PCI0 MSI level 3 */
+#define UIC_L2C 0x00100000 /* L2 cache */
+#define UIC_CT0 0x00080000 /* GPT compare timer 0 */
+#define UIC_CT1 0x00040000 /* GPT compare timer 1 */
+#define UIC_CT2 0x00020000 /* GPT compare timer 2 */
+#define UIC_CT3 0x00010000 /* GPT compare timer 3 */
+#define UIC_CT4 0x00008000 /* GPT compare timer 4 */
+#define UIC_CT5 0x00004000 /* GPT compare timer 5 */
+#define UIC_CT6 0x00002000 /* GPT compare timer 6 */
+#define UIC_GPTDC 0x00001000 /* GPT decrementer pulse */
+#define UIC_EIR3 0x00000800 /* External interrupt 3 */
+#define UIC_EIR4 0x00000400 /* External interrupt 4 */
+#define UIC_DMAE 0x00000200 /* DMA error */
+#define UIC_I2OE 0x00000100 /* I2O error */
+#define UIC_SRE 0x00000080 /* Serial ROM error */
+#define UIC_P0AE 0x00000040 /* PCI0 asynchronous error */
+#define UIC_EIR5 0x00000020 /* External interrupt 5 */
+#define UIC_EIR6 0x00000010 /* External interrupt 6 */
+#define UIC_U2 0x00000008 /* UART 2 */
+#define UIC_U3 0x00000004 /* UART 3 */
+#define UIC_EIR7 0x00000002 /* External interrupt 7 */
+#define UIC_EIR8 0x00000001 /* External interrupt 8 */
+
#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define UIC_MS 0x80000000 /* MAL SERR */
@@ -2340,6 +2436,41 @@
#define UIC_RSVD30 0x00000002 /* Reserved */
#define UIC_RSVD31 0x00000001 /* Reserved */
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
+#define UIC_TAH0 0x80000000 /* TAHOE 0 */
+#define UIC_TAH1 0x40000000 /* TAHOE 1 */
+#define UIC_EIR9 0x20000000 /* External interrupt 9 */
+#define UIC_MS 0x10000000 /* MAL SERR */
+#define UIC_MTDE 0x08000000 /* MAL TXDE */
+#define UIC_MRDE 0x04000000 /* MAL RXDE */
+#define UIC_MTE 0x02000000 /* MAL TXEOB */
+#define UIC_MRE 0x01000000 /* MAL RXEOB */
+#define UIC_MCTX0 0x00800000 /* MAL interrupt coalescence TX0 */
+#define UIC_MCTX1 0x00400000 /* MAL interrupt coalescence TX1 */
+#define UIC_MCTX2 0x00200000 /* MAL interrupt coalescence TX2 */
+#define UIC_MCTX3 0x00100000 /* MAL interrupt coalescence TX3 */
+#define UIC_MCTR0 0x00080000 /* MAL interrupt coalescence TR0 */
+#define UIC_MCTR1 0x00040000 /* MAL interrupt coalescence TR1 */
+#define UIC_MCTR2 0x00020000 /* MAL interrupt coalescence TR2 */
+#define UIC_MCTR3 0x00010000 /* MAL interrupt coalescence TR3 */
+#define UIC_ETH0 0x00008000 /* Ethernet 0 */
+#define UIC_ETH1 0x00004000 /* Ethernet 1 */
+#define UIC_ETH2 0x00002000 /* Ethernet 2 */
+#define UIC_ETH3 0x00001000 /* Ethernet 3 */
+#define UIC_EWU0 0x00000800 /* Ethernet 0 wakeup */
+#define UIC_EWU1 0x00000400 /* Ethernet 1 wakeup */
+#define UIC_EWU2 0x00000200 /* Ethernet 2 wakeup */
+#define UIC_EWU3 0x00000100 /* Ethernet 3 wakeup */
+#define UIC_EIR10 0x00000080 /* External interrupt 10 */
+#define UIC_EIR11 0x00000040 /* External interrupt 11 */
+#define UIC_RSVD2 0x00000020 /* Reserved */
+#define UIC_PLB4XAHB 0x00000010 /* PLB4XAHB / AHBARB error */
+#define UIC_OTG 0x00000008 /* USB2.0 OTG */
+#define UIC_EHCI 0x00000004 /* USB2.0 Host EHCI */
+#define UIC_OHCI 0x00000002 /* USB2.0 Host OHCI */
+#define UIC_OHCISMI 0x00000001 /* USB2.0 Host OHCI SMI */
+
#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC2 */
#define UIC_EIR5 0x80000000 /* External interrupt 5 */
@@ -2366,18 +2497,38 @@
#define UICB0_UIC2CI 0x08000000 /* UIC2 Critical Interrupt */
#define UICB0_UIC2NCI 0x04000000 /* UIC2 Noncritical Interrupt */
-#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
- UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
+#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
+ UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
+
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
+#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */
+#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */
+#define UICB0_UIC2NCI 0x00200000 /* UIC2 Noncritical Interrupt */
+#define UICB0_UIC2CI 0x00100000 /* UIC2 Critical Interrupt */
+#define UICB0_UIC3NCI 0x00008000 /* UIC3 Noncritical Interrupt */
+#define UICB0_UIC3CI 0x00004000 /* UIC3 Critical Interrupt */
+
+#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \
+ UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI)
#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define UICB0_UIC1CI 0x00000000 /* UIC1 Critical Interrupt */
-#define UICB0_UIC1NCI 0x00000000 /* UIC1 Noncritical Interrupt */
-#define UICB0_UIC2CI 0x00000000 /* UIC2 Critical Interrupt */
-#define UICB0_UIC2NCI 0x00000000 /* UIC2 Noncritical Interrupt */
+#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */
+#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */
+#define UICB0_UIC2CI 0x00000004 /* UIC2 Critical Interrupt */
+#define UICB0_UIC2NCI 0x00000008 /* UIC2 Noncritical Interrupt */
-#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
- UICB0_UIC1CI | UICB0_UIC2NCI)
+#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
+ UICB0_UIC1CI | UICB0_UIC2NCI)
+
+#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR)
+
+#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */
+#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */
+
+#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI)
#endif /* CONFIG_440GX */
/*---------------------------------------------------------------------------+
@@ -3018,6 +3169,201 @@
#define SDR0_MFR 0x4300
#endif /* CONFIG_440SPE */
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+/* Pin Function Control Register 0 (SDR0_PFC0) */
+#define SDR0_PFC0 0x4100
+#define SDR0_PFC0_DBG 0x00008000 /* debug enable */
+#define SDR0_PFC0_G49E 0x00004000 /* GPIO 49 enable */
+#define SDR0_PFC0_G50E 0x00002000 /* GPIO 50 enable */
+#define SDR0_PFC0_G51E 0x00001000 /* GPIO 51 enable */
+#define SDR0_PFC0_G52E 0x00000800 /* GPIO 52 enable */
+#define SDR0_PFC0_G53E 0x00000400 /* GPIO 53 enable */
+#define SDR0_PFC0_G54E 0x00000200 /* GPIO 54 enable */
+#define SDR0_PFC0_G55E 0x00000100 /* GPIO 55 enable */
+#define SDR0_PFC0_G56E 0x00000080 /* GPIO 56 enable */
+#define SDR0_PFC0_G57E 0x00000040 /* GPIO 57 enable */
+#define SDR0_PFC0_G58E 0x00000020 /* GPIO 58 enable */
+#define SDR0_PFC0_G59E 0x00000010 /* GPIO 59 enable */
+#define SDR0_PFC0_G60E 0x00000008 /* GPIO 60 enable */
+#define SDR0_PFC0_G61E 0x00000004 /* GPIO 61 enable */
+#define SDR0_PFC0_G62E 0x00000002 /* GPIO 62 enable */
+#define SDR0_PFC0_G63E 0x00000001 /* GPIO 63 enable */
+
+/* Pin Function Control Register 1 (SDR0_PFC1) */
+#define SDR0_PFC1 0x4101
+#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
+#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
+#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
+#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
+#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
+#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
+#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
+#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins*/
+#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins*/
+#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
+#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
+#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
+
+/* Ethernet PLL Configuration Register (SDR0_ETH_PLL) */
+#define SDR0_ETH_PLL 0x4102
+#define SDR0_ETH_PLL_PLLLOCK 0x80000000 /*Ethernet PLL lock indication*/
+#define SDR0_ETH_PLL_REF_CLK_SEL 0x10000000 /* Ethernet reference clock */
+#define SDR0_ETH_PLL_BYPASS 0x08000000 /* bypass mode enable */
+#define SDR0_ETH_PLL_STOPCLK 0x04000000 /* output clock disable */
+#define SDR0_ETH_PLL_TUNE_MASK 0x03FF0000 /* loop stability tuning bits */
+#define SDR0_ETH_PLL_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3ff)<<16)
+#define SDR0_ETH_PLL_MULTI_MASK 0x0000FF00 /* frequency multiplication */
+#define SDR0_ETH_PLL_MULTI_ENCODE(n) ((((unsigned long)(n))&0xff)<<8)
+#define SDR0_ETH_PLL_RANGEB_MASK 0x000000F0 /* PLLOUTB/C frequency */
+#define SDR0_ETH_PLL_RANGEB_ENCODE(n) ((((unsigned long)(n))&0x0f)<<4)
+#define SDR0_ETH_PLL_RANGEA_MASK 0x0000000F /* PLLOUTA frequency */
+#define SDR0_ETH_PLL_RANGEA_ENCODE(n) (((unsigned long)(n))&0x0f)
+
+/* Ethernet Configuration Register (SDR0_ETH_CFG) */
+#define SDR0_ETH_CFG 0x4103
+#define SDR0_ETH_CFG_SGMII3_LPBK 0x00800000 /* SGMII3 port loopback enable */
+#define SDR0_ETH_CFG_SGMII2_LPBK 0x00400000 /* SGMII2 port loopback enable */
+#define SDR0_ETH_CFG_SGMII1_LPBK 0x00200000 /* SGMII1 port loopback enable */
+#define SDR0_ETH_CFG_SGMII0_LPBK 0x00100000 /* SGMII0 port loopback enable */
+#define SDR0_ETH_CFG_SGMII_MASK 0x00070000 /* SGMII Mask */
+#define SDR0_ETH_CFG_SGMII2_ENABLE 0x00040000 /* SGMII2 port enable */
+#define SDR0_ETH_CFG_SGMII1_ENABLE 0x00020000 /* SGMII1 port enable */
+#define SDR0_ETH_CFG_SGMII0_ENABLE 0x00010000 /* SGMII0 port enable */
+#define SDR0_ETH_CFG_TAHOE1_BYPASS 0x00002000 /* TAHOE1 Bypass selector */
+#define SDR0_ETH_CFG_TAHOE0_BYPASS 0x00001000 /* TAHOE0 Bypass selector */
+#define SDR0_ETH_CFG_EMAC3_PHY_CLK_SEL 0x00000800 /* EMAC 3 PHY clock selector */
+#define SDR0_ETH_CFG_EMAC2_PHY_CLK_SEL 0x00000400 /* EMAC 2 PHY clock selector */
+#define SDR0_ETH_CFG_EMAC1_PHY_CLK_SEL 0x00000200 /* EMAC 1 PHY clock selector */
+#define SDR0_ETH_CFG_EMAC0_PHY_CLK_SEL 0x00000100 /* EMAC 0 PHY clock selector */
+#define SDR0_ETH_CFG_EMAC_2_1_SWAP 0x00000080 /* Swap EMAC2 with EMAC1 */
+#define SDR0_ETH_CFG_EMAC_0_3_SWAP 0x00000040 /* Swap EMAC0 with EMAC3 */
+#define SDR0_ETH_CFG_MDIO_SEL_MASK 0x00000030 /* MDIO source selector mask */
+#define SDR0_ETH_CFG_MDIO_SEL_EMAC0 0x00000000 /* MDIO source - EMAC0 */
+#define SDR0_ETH_CFG_MDIO_SEL_EMAC1 0x00000010 /* MDIO source - EMAC1 */
+#define SDR0_ETH_CFG_MDIO_SEL_EMAC2 0x00000020 /* MDIO source - EMAC2 */
+#define SDR0_ETH_CFG_MDIO_SEL_EMAC3 0x00000030 /* MDIO source - EMAC3 */
+#define SDR0_ETH_CFG_ZMII_MODE_MASK 0x0000000C /* ZMII bridge mode selector mask */
+#define SDR0_ETH_CFG_ZMII_SEL_MII 0x00000000 /* ZMII bridge mode - MII */
+#define SDR0_ETH_CFG_ZMII_SEL_SMII 0x00000004 /* ZMII bridge mode - SMII */
+#define SDR0_ETH_CFG_ZMII_SEL_RMII_10 0x00000008 /* ZMII bridge mode - RMII (10 Mbps) */
+#define SDR0_ETH_CFG_ZMII_SEL_RMII_100 0x0000000C /* ZMII bridge mode - RMII (100 Mbps) */
+#define SDR0_ETH_CFG_GMC1_BRIDGE_SEL 0x00000002 /* GMC Port 1 bridge selector */
+#define SDR0_ETH_CFG_GMC0_BRIDGE_SEL 0x00000001 /* GMC Port 0 bridge selector */
+
+#define SDR0_ETH_CFG_ZMII_MODE_SHIFT 4
+#define SDR0_ETH_CFG_ZMII_MII_MODE 0x00
+#define SDR0_ETH_CFG_ZMII_SMII_MODE 0x01
+#define SDR0_ETH_CFG_ZMII_RMII_MODE_10M 0x10
+#define SDR0_ETH_CFG_ZMII_RMII_MODE_100M 0x11
+
+/* Miscealleneaous Function Reg. (SDR0_MFR) */
+#define SDR0_MFR 0x4300
+#define SDR0_MFR_T0TxFL 0x00800000 /* force parity error TAHOE0 Tx FIFO bits 0:63 */
+#define SDR0_MFR_T0TxFH 0x00400000 /* force parity error TAHOE0 Tx FIFO bits 64:127 */
+#define SDR0_MFR_T1TxFL 0x00200000 /* force parity error TAHOE1 Tx FIFO bits 0:63 */
+#define SDR0_MFR_T1TxFH 0x00100000 /* force parity error TAHOE1 Tx FIFO bits 64:127 */
+#define SDR0_MFR_E0TxFL 0x00008000 /* force parity error EMAC0 Tx FIFO bits 0:63 */
+#define SDR0_MFR_E0TxFH 0x00004000 /* force parity error EMAC0 Tx FIFO bits 64:127 */
+#define SDR0_MFR_E0RxFL 0x00002000 /* force parity error EMAC0 Rx FIFO bits 0:63 */
+#define SDR0_MFR_E0RxFH 0x00001000 /* force parity error EMAC0 Rx FIFO bits 64:127 */
+#define SDR0_MFR_E1TxFL 0x00000800 /* force parity error EMAC1 Tx FIFO bits 0:63 */
+#define SDR0_MFR_E1TxFH 0x00000400 /* force parity error EMAC1 Tx FIFO bits 64:127 */
+#define SDR0_MFR_E1RxFL 0x00000200 /* force parity error EMAC1 Rx FIFO bits 0:63 */
+#define SDR0_MFR_E1RxFH 0x00000100 /* force parity error EMAC1 Rx FIFO bits 64:127 */
+#define SDR0_MFR_E2TxFL 0x00000080 /* force parity error EMAC2 Tx FIFO bits 0:63 */
+#define SDR0_MFR_E2TxFH 0x00000040 /* force parity error EMAC2 Tx FIFO bits 64:127 */
+#define SDR0_MFR_E2RxFL 0x00000020 /* force parity error EMAC2 Rx FIFO bits 0:63 */
+#define SDR0_MFR_E2RxFH 0x00000010 /* force parity error EMAC2 Rx FIFO bits 64:127 */
+#define SDR0_MFR_E3TxFL 0x00000008 /* force parity error EMAC3 Tx FIFO bits 0:63 */
+#define SDR0_MFR_E3TxFH 0x00000004 /* force parity error EMAC3 Tx FIFO bits 64:127 */
+#define SDR0_MFR_E3RxFL 0x00000002 /* force parity error EMAC3 Rx FIFO bits 0:63 */
+#define SDR0_MFR_E3RxFH 0x00000001 /* force parity error EMAC3 Rx FIFO bits 64:127 */
+
+/* EMACx TX Status Register (SDR0_EMACxTXST)*/
+#define SDR0_EMAC0TXST 0x4400
+#define SDR0_EMAC1TXST 0x4401
+#define SDR0_EMAC2TXST 0x4402
+#define SDR0_EMAC3TXST 0x4403
+
+#define SDR0_EMACxTXST_FUR 0x02000000 /* TX FIFO underrun */
+#define SDR0_EMACxTXST_BC 0x01000000 /* broadcase address */
+#define SDR0_EMACxTXST_MC 0x00800000 /* multicast address */
+#define SDR0_EMACxTXST_UC 0x00400000 /* unicast address */
+#define SDR0_EMACxTXST_FP 0x00200000 /* frame paused by control packet */
+#define SDR0_EMACxTXST_BFCS 0x00100000 /* bad FCS in the transmitted frame */
+#define SDR0_EMACxTXST_CPF 0x00080000 /* TX control pause frame */
+#define SDR0_EMACxTXST_CF 0x00040000 /* TX control frame */
+#define SDR0_EMACxTXST_MSIZ 0x00020000 /* 1024-maxsize bytes transmitted */
+#define SDR0_EMACxTXST_1023 0x00010000 /* 512-1023 bytes transmitted */
+#define SDR0_EMACxTXST_511 0x00008000 /* 256-511 bytes transmitted */
+#define SDR0_EMACxTXST_255 0x00004000 /* 128-255 bytes transmitted */
+#define SDR0_EMACxTXST_127 0x00002000 /* 65-127 bytes transmitted */
+#define SDR0_EMACxTXST_64 0x00001000 /* 64 bytes transmitted */
+#define SDR0_EMACxTXST_SQE 0x00000800 /* SQE indication */
+#define SDR0_EMACxTXST_LOC 0x00000400 /* loss of carrier sense */
+#define SDR0_EMACxTXST_IERR 0x00000080 /* EMAC internal error */
+#define SDR0_EMACxTXST_EDF 0x00000040 /* excessive deferral */
+#define SDR0_EMACxTXST_ECOL 0x00000020 /* excessive collisions */
+#define SDR0_EMACxTXST_LCOL 0x00000010 /* late collision */
+#define SDR0_EMACxTXST_DFFR 0x00000008 /* deferred frame */
+#define SDR0_EMACxTXST_MCOL 0x00000004 /* multiple collision frame */
+#define SDR0_EMACxTXST_SCOL 0x00000002 /* single collision frame */
+#define SDR0_EMACxTXST_TXOK 0x00000001 /* transmit OK */
+
+/* EMACx RX Status Register (SDR0_EMACxRXST)*/
+#define SDR0_EMAC0RXST 0x4404
+#define SDR0_EMAC1RXST 0x4405
+#define SDR0_EMAC2RXST 0x4406
+#define SDR0_EMAC3RXST 0x4407
+
+#define SDR0_EMACxRXST_FOR 0x20000000 /* RX FIFO overrun */
+#define SDR0_EMACxRXST_BC 0x10000000 /* broadcast address */
+#define SDR0_EMACxRXST_MC 0x08000000 /* multicast address */
+#define SDR0_EMACxRXST_UC 0x04000000 /* unicast address */
+#define SDR0_EMACxRXST_UPR_MASK 0x03800000 /* user priority field */
+#define SDR0_EMACxRXST_UPR_ENCODE(n) ((((unsigned long)(n))&0x07)<<23)
+#define SDR0_EMACxRXST_VLAN 0x00400000 /* RX VLAN tagged frame */
+#define SDR0_EMACxRXST_LOOP 0x00200000 /* received in loop-back mode */
+#define SDR0_EMACxRXST_UOP 0x00100000 /* RX unsupported opcode */
+#define SDR0_EMACxRXST_CPF 0x00080000 /* RX control pause frame */
+#define SDR0_EMACxRXST_CF 0x00040000 /* RX control frame*/
+#define SDR0_EMACxRXST_MSIZ 0x00020000 /* 1024-MaxSize bytes recieved*/
+#define SDR0_EMACxRXST_1023 0x00010000 /* 512-1023 bytes received */
+#define SDR0_EMACxRXST_511 0x00008000 /* 128-511 bytes received */
+#define SDR0_EMACxRXST_255 0x00004000 /* 128-255 bytes received */
+#define SDR0_EMACxRXST_127 0x00002000 /* 65-127 bytes received */
+#define SDR0_EMACxRXST_64 0x00001000 /* 64 bytes received */
+#define SDR0_EMACxRXST_RUNT 0x00000800 /* runt frame */
+#define SDR0_EMACxRXST_SEVT 0x00000400 /* short event */
+#define SDR0_EMACxRXST_AERR 0x00000200 /* alignment error */
+#define SDR0_EMACxRXST_SERR 0x00000100 /* received with symbol error */
+#define SDR0_EMACxRXST_BURST 0x00000040 /* received burst */
+#define SDR0_EMACxRXST_F2L 0x00000020 /* frame is to long */
+#define SDR0_EMACxRXST_OERR 0x00000010 /* out of range length error */
+#define SDR0_EMACxRXST_IERR 0x00000008 /* in range length error */
+#define SDR0_EMACxRXST_LOST 0x00000004 /* frame lost due to internal EMAC receive error */
+#define SDR0_EMACxRXST_BFCS 0x00000002 /* bad FCS in the recieved frame */
+#define SDR0_EMACxRXST_RXOK 0x00000001 /* Recieve OK */
+
+/* EMACx TX Status Register (SDR0_EMACxREJCNT)*/
+#define SDR0_EMAC0REJCNT 0x4408
+#define SDR0_EMAC1REJCNT 0x4409
+#define SDR0_EMAC2REJCNT 0x440A
+#define SDR0_EMAC3REJCNT 0x440B
+
+#define SDR0_DDR0 0x00E1
+#define SDR0_DDR0_DPLLRST 0x80000000
+#define SDR0_DDR0_DDRM_MASK 0x60000000
+#define SDR0_DDR0_DDRM_DDR1 0x20000000
+#define SDR0_DDR0_DDRM_DDR2 0x40000000
+#define SDR0_DDR0_DDRM_ENCODE(n) ((((unsigned long)(n))&0x03)<<29)
+#define SDR0_DDR0_DDRM_DECODE(n) ((((unsigned long)(n))>>29)&0x03)
+#define SDR0_DDR0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x2FF)<<0)
+#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF)
+
+#define AHB_TOP 0xA4
+#define AHB_BOT 0xA5
+#endif /* CONFIG_460EX || CONFIG_460GT */
#define SDR0_SDCS_SDD (0x80000000 >> 31)
@@ -3232,6 +3578,73 @@
#define SDR0_SRST1_FPU 0x00004000 /* Floating Point Unit */
#define SDR0_SRST1_KASU0 0x00002000 /* Kasumi Engine */
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
+#define SDR0_SRST0 0x0200
+#define SDR0_SRST SDR0_SRST0 /* for compatability reasons */
+#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
+#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
+#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
+#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */
+#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/transmitter 0 */
+#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/transmitter 1 */
+#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */
+#define SDR0_SRST0_IIC1 0x01000000 /* Inter integrated circuit 1 */
+#define SDR0_SRST0_GPIO0 0x00800000 /* General purpose I/O 0 */
+#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */
+#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */
+#define SDR0_SRST0_PCI 0x00100000 /* PCI */
+#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */
+#define SDR0_SRST0_IMU 0x00010000 /* I2O DMA */
+#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0*/
+#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1*/
+#define SDR0_SRST0_SRAM 0x00002000 /* Universal interrupt controller 0*/
+#define SDR0_SRST0_UIC2 0x00001000 /* Universal interrupt controller 2*/
+#define SDR0_SRST0_UIC3 0x00000800 /* Universal interrupt controller 3*/
+#define SDR0_SRST0_OCM 0x00000400 /* Universal interrupt controller 0*/
+#define SDR0_SRST0_UART2 0x00000200 /* Universal asynchronous receiver/transmitter 2 */
+#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */
+#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */
+#define SDR0_SRST0_L2CACHE 0x00000004 /* L2 Cache */
+#define SDR0_SRST0_UART3 0x00000002 /* Universal asynchronous receiver/transmitter 3 */
+#define SDR0_SRST0_GPIO1 0x00000001 /* General purpose I/O 1 */
+
+#define SDR0_SRST1 0x201
+#define SDR0_SRST1_RLL 0x80000000 /* SRIO RLL */
+#define SDR0_SRST1_SCP 0x40000000 /* Serial communications port */
+#define SDR0_SRST1_PLBARB 0x20000000 /* PLB Arbiter */
+#define SDR0_SRST1_EIPPKP 0x10000000 /* EIPPPKP */
+#define SDR0_SRST1_EIP94 0x08000000 /* EIP 94 */
+#define SDR0_SRST1_EMAC0 0x04000000 /* Ethernet media access controller 0 */
+#define SDR0_SRST1_EMAC1 0x02000000 /* Ethernet media access controller 1 */
+#define SDR0_SRST1_EMAC2 0x01000000 /* Ethernet media access controller 2 */
+#define SDR0_SRST1_EMAC3 0x00800000 /* Ethernet media access controller 3 */
+#define SDR0_SRST1_ZMII 0x00400000 /* Ethernet ZMII/RMII/SMII */
+#define SDR0_SRST1_RGMII0 0x00200000 /* Ethernet RGMII/RTBI 0 */
+#define SDR0_SRST1_RGMII1 0x00100000 /* Ethernet RGMII/RTBI 1 */
+#define SDR0_SRST1_DMA4 0x00080000 /* DMA to PLB4 */
+#define SDR0_SRST1_DMA4CH 0x00040000 /* DMA Channel to PLB4 */
+#define SDR0_SRST1_SATAPHY 0x00020000 /* Serial ATA PHY */
+#define SDR0_SRST1_SRIODEV 0x00010000 /* Serial Rapid IO core, PCS, and serdes */
+#define SDR0_SRST1_SRIOPCS 0x00008000 /* Serial Rapid IO core and PCS */
+#define SDR0_SRST1_NDFC 0x00004000 /* Nand flash controller */
+#define SDR0_SRST1_SRIOPLB 0x00002000 /* Serial Rapid IO PLB */
+#define SDR0_SRST1_ETHPLL 0x00001000 /* Ethernet PLL */
+#define SDR0_SRST1_TAHOE1 0x00000800 /* Ethernet Tahoe 1 */
+#define SDR0_SRST1_TAHOE0 0x00000400 /* Ethernet Tahoe 0 */
+#define SDR0_SRST1_SGMII0 0x00000200 /* Ethernet SGMII 0 */
+#define SDR0_SRST1_SGMII1 0x00000100 /* Ethernet SGMII 1 */
+#define SDR0_SRST1_SGMII2 0x00000080 /* Ethernet SGMII 2 */
+#define SDR0_SRST1_AHB 0x00000040 /* PLB4XAHB bridge */
+#define SDR0_SRST1_USBOTGPHY 0x00000020 /* USB 2.0 OTG PHY */
+#define SDR0_SRST1_USBOTG 0x00000010 /* USB 2.0 OTG controller */
+#define SDR0_SRST1_USBHOST 0x00000008 /* USB 2.0 Host controller */
+#define SDR0_SRST1_AHBDMAC 0x00000004 /* AHB DMA controller */
+#define SDR0_SRST1_AHBICM 0x00000002 /* AHB inter-connect matrix */
+#define SDR0_SRST1_SATA 0x00000001 /* Serial ATA controller */
+
+#define SDR0_PCI0 0x1c0 /* PCI Configuration Register */
+
#else
#define SDR0_SRST_BGO 0x80000000
@@ -3270,7 +3683,15 @@
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
-#if !defined (CONFIG_440GX) && \
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define PLLSYS0_FWD_DIV_A_MASK 0x000000f0 /* Fwd Div A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x0000000f /* Fwd Div B */
+#define PLLSYS0_FB_DIV_MASK 0x0000ff00 /* Feedback divisor */
+#define PLLSYS0_OPB_DIV_MASK 0x0c000000 /* OPB Divisor */
+#define PLLSYS0_PLBEDV0_DIV_MASK 0xe0000000 /* PLB Early Clock Divisor */
+#define PLLSYS0_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
+#define PLLSYS0_SEL_MASK 0x18000000 /* 0 = PLL, 1 = PerClk */
+#elif !defined (CONFIG_440GX) && \
!defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
!defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
!defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
@@ -3624,7 +4045,8 @@
#endif /* CONFIG_440GP */
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000B00)
#define GPIO1_BASE (CFG_PERIPHERAL_BASE+0x00000C00)
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index 317604a..0208454 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -131,7 +131,7 @@
} EMAC_4XX_HW_ST, *EMAC_4XX_HW_PST;
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_460GT)
#define EMAC_NUM_DEV 4
#elif (defined(CONFIG_440) || defined(CONFIG_405EP)) && \
defined(CONFIG_NET_MULTI) && \
@@ -155,7 +155,8 @@
/* ZMII Bridge Register addresses */
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00)
#else
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780)
@@ -164,9 +165,6 @@
#define ZMII_SSR (ZMII_BASE + 4)
#define ZMII_SMIISR (ZMII_BASE + 8)
-#define ZMII_RMII 0x22000000
-#define ZMII_MDI0 0x80000000
-
/* ZMII FER Register Bit Definitions */
#define ZMII_FER_DIS (0x0)
#define ZMII_FER_MDI (0x8)
@@ -205,6 +203,8 @@
/* RGMII Register Addresses */
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x1000)
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x1500)
#elif defined(CONFIG_405EX)
#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0xB00)
#else
@@ -223,19 +223,21 @@
#define RGMII_FER_V(__x) ((__x - 2) * 4)
+#define RGMII_FER_MDIO(__x) (1 << (19 - (__x)))
+
/* RGMII Speed Selection Register Bit Definitions */
#define RGMII_SSR_SP_10MBPS (0x00)
#define RGMII_SSR_SP_100MBPS (0x02)
#define RGMII_SSR_SP_1000MBPS (0x04)
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
#define RGMII_SSR_V(__x) ((__x) * 8)
#else
#define RGMII_SSR_V(__x) ((__x -2) * 8)
#endif
-
/*---------------------------------------------------------------------------+
| TCP/IP Acceleration Hardware (TAH) 440GX Only
+---------------------------------------------------------------------------*/
@@ -304,7 +306,8 @@
/* Ethernet MAC Regsiter Addresses */
#if defined(CONFIG_440)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00)
#else
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
@@ -345,6 +348,7 @@
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
/* MODE Reg 1 */
#define EMAC_M1_FDE (0x80000000)
diff --git a/include/rtc.h b/include/rtc.h
index 15f3571..2995144 100644
--- a/include/rtc.h
+++ b/include/rtc.h
@@ -52,7 +52,7 @@
int tm_isdst;
};
-void rtc_get (struct rtc_time *);
+int rtc_get (struct rtc_time *);
void rtc_set (struct rtc_time *);
void rtc_reset (void);
diff --git a/include/vsc7385.h b/include/vsc7385.h
new file mode 100644
index 0000000..0432499
--- /dev/null
+++ b/include/vsc7385.h
@@ -0,0 +1,13 @@
+/*
+ * Header file for vsc7385.c
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. This file is licensed
+ * under the terms of the GNU General Public License version 2. This
+ * program is licensed "as is" without any warranty of any kind, whether
+ * express or implied.
+ */
+
+int vsc7385_upload_firmware(void *firmware, unsigned int size);
+
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index 86a3b67..2a5a2fc 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -116,6 +116,7 @@
{
sprintf(version_string, VERSION_STRING_FORMAT, VERSION_STRING);
printf("%s\n", version_string);
+ printf("CPU: ADSP " MK_STR(CONFIG_BFIN_CPU) " (Detected Rev: 0.%d)\n", bfin_revid());
return (0);
}
@@ -404,7 +405,7 @@
misc_init_r();
#endif
-#if ((BFIN_CPU == ADSP_BF537) || (BFIN_CPU == ADSP_BF536))
+#ifdef CONFIG_CMD_NET
printf("Net: ");
eth_initialize(bd);
#endif
diff --git a/lib_blackfin/memcmp.S b/lib_blackfin/memcmp.S
index 9b58832..6c834a7 100644
--- a/lib_blackfin/memcmp.S
+++ b/lib_blackfin/memcmp.S
@@ -31,6 +31,7 @@
*/
.globl _memcmp;
+.type _memcmp, STT_FUNC;
_memcmp:
I1 = P3;
P0 = R0; /* P0 = s1 address */
@@ -98,3 +99,5 @@
R0 = 0;
P3 = I1;
RTS;
+
+.size _memcmp, .-_memcmp
diff --git a/lib_blackfin/memcpy.S b/lib_blackfin/memcpy.S
index 24577be..e6b359a 100644
--- a/lib_blackfin/memcpy.S
+++ b/lib_blackfin/memcpy.S
@@ -23,6 +23,7 @@
.align 2
.globl _memcpy_ASM;
+.type _memcpy_ASM, STT_FUNC;
_memcpy_ASM:
CC = R2 <= 0; /* length not positive?*/
IF CC JUMP .L_P1L2147483647; /* Nothing to do */
@@ -112,3 +113,5 @@
B[P0--] = R1;
RTS;
+
+.size _memcpy_ASM, .-_memcpy_ASM
diff --git a/lib_blackfin/memmove.S b/lib_blackfin/memmove.S
index 46f79ed..e385c4f 100644
--- a/lib_blackfin/memmove.S
+++ b/lib_blackfin/memmove.S
@@ -31,6 +31,7 @@
*/
.globl _memmove;
+.type _memmove, STT_FUNC;
_memmove:
I1 = P3;
P0 = R0; /* P0 = To address */
@@ -91,3 +92,5 @@
.Lno_loop: B[P0] = R1;
P3 = I1;
RTS;
+
+.size _memmove, .-_memmove
diff --git a/lib_blackfin/memset.S b/lib_blackfin/memset.S
index c33c551..26f63cd 100644
--- a/lib_blackfin/memset.S
+++ b/lib_blackfin/memset.S
@@ -31,6 +31,7 @@
*/
.globl _memset;
+.type _memset, STT_FUNC;
_memset:
P0 = R0 ; /* P0 = address */
P2 = R2 ; /* P2 = count */
@@ -91,3 +92,5 @@
B[P0++] = R1;
B[P0++] = R1;
JUMP .Laligned;
+
+.size _memset, .-_memset
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index fbf1c5d..3ab22f8 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -433,13 +433,26 @@
*/
len = (ulong)&_end - CFG_MONITOR_BASE;
+#ifndef CONFIG_MAX_MEM_MAPPED
+#define CONFIG_MAX_MEM_MAPPED (256 << 20)
+#endif
+
+#ifndef CONFIG_VERY_BIG_RAM
addr = CFG_SDRAM_BASE + get_effective_memsize();
+#else
+ /* only allow stack below 256M */
+ addr = CFG_SDRAM_BASE +
+ (gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
+ CONFIG_MAX_MEM_MAPPED : get_effective_memsize();
+#endif
#ifdef CONFIG_LOGBUFFER
+#ifndef CONFIG_ALT_LB_ADDR
/* reserve kernel log buffer */
addr -= (LOGBUFF_RESERVE);
debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
#endif
+#endif
#ifdef CONFIG_PRAM
/*
@@ -1126,9 +1139,11 @@
pram=0;
#endif
#ifdef CONFIG_LOGBUFFER
+#ifndef CONFIG_ALT_LB_ADDR
/* Also take the logbuffer into account (pram is in kB) */
pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
#endif
+#endif
sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
setenv ("mem", (char *)memsz);
}
diff --git a/libfdt/fdt.c b/libfdt/fdt.c
index 660e2c1..cfa1989 100644
--- a/libfdt/fdt.c
+++ b/libfdt/fdt.c
@@ -188,10 +188,7 @@
int fdt_move(const void *fdt, void *buf, int bufsize)
{
- int err = fdt_check_header(fdt);
-
- if (err)
- return err;
+ CHECK_HEADER(fdt);
if (fdt_totalsize(fdt) > bufsize)
return -FDT_ERR_NOSPACE;
diff --git a/libfdt/fdt_ro.c b/libfdt/fdt_ro.c
index 031a15f..11d80d2 100644
--- a/libfdt/fdt_ro.c
+++ b/libfdt/fdt_ro.c
@@ -59,13 +59,6 @@
#include "libfdt_internal.h"
-#define CHECK_HEADER(fdt) \
- { \
- int err; \
- if ((err = fdt_check_header(fdt)) != 0) \
- return err; \
- }
-
static int nodename_eq(const void *fdt, int offset,
const char *s, int len)
{
@@ -464,20 +457,10 @@
int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
const char *compatible)
{
- uint32_t tag;
- int offset, nextoffset;
- int err;
+ int offset, err;
CHECK_HEADER(fdt);
- if (startoffset >= 0) {
- tag = fdt_next_tag(fdt, startoffset, &nextoffset);
- if (tag != FDT_BEGIN_NODE)
- return -FDT_ERR_BADOFFSET;
- } else {
- nextoffset = 0;
- }
-
/* FIXME: The algorithm here is pretty horrible: we scan each
* property of a node in fdt_node_check_compatible(), then if
* that didn't find what we want, we scan over them again
diff --git a/libfdt/fdt_rw.c b/libfdt/fdt_rw.c
index 2fb81dd..8609fa7 100644
--- a/libfdt/fdt_rw.c
+++ b/libfdt/fdt_rw.c
@@ -73,10 +73,8 @@
static int rw_check_header(void *fdt)
{
- int err;
+ CHECK_HEADER(fdt);
- if ((err = fdt_check_header(fdt)))
- return err;
if (fdt_version(fdt) < 17)
return -FDT_ERR_BADVERSION;
if (_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry),
@@ -256,6 +254,30 @@
return 0;
}
+int fdt_set_name(void *fdt, int nodeoffset, const char *name)
+{
+ char *namep;
+ int oldlen, newlen;
+ int err;
+
+ if ((err = rw_check_header(fdt)))
+ return err;
+
+ namep = (char *)fdt_get_name(fdt, nodeoffset, &oldlen);
+ if (!namep)
+ return oldlen;
+
+ newlen = strlen(name);
+
+ err = _blob_splice_struct(fdt, namep, ALIGN(oldlen+1, FDT_TAGSIZE),
+ ALIGN(newlen+1, FDT_TAGSIZE));
+ if (err)
+ return err;
+
+ memcpy(namep, name, newlen+1);
+ return 0;
+}
+
int fdt_setprop(void *fdt, int nodeoffset, const char *name,
const void *val, int len)
{
@@ -313,7 +335,7 @@
do {
offset = nextoffset;
tag = fdt_next_tag(fdt, offset, &nextoffset);
- } while (tag == FDT_PROP);
+ } while ((tag == FDT_PROP) || (tag == FDT_NOP));
nh = _fdt_offset_ptr_w(fdt, offset);
nodelen = sizeof(*nh) + ALIGN(namelen+1, FDT_TAGSIZE) + FDT_TAGSIZE;
@@ -379,9 +401,7 @@
int newsize;
void *tmp;
- err = fdt_check_header(fdt);
- if (err)
- return err;
+ CHECK_HEADER(fdt);
mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
* sizeof(struct fdt_reserve_entry);
diff --git a/libfdt/libfdt_internal.h b/libfdt/libfdt_internal.h
index 1e60936..52e1b8d 100644
--- a/libfdt/libfdt_internal.h
+++ b/libfdt/libfdt_internal.h
@@ -58,6 +58,13 @@
#define memeq(p, q, n) (memcmp((p), (q), (n)) == 0)
#define streq(p, q) (strcmp((p), (q)) == 0)
+#define CHECK_HEADER(fdt) \
+ { \
+ int err; \
+ if ((err = fdt_check_header(fdt)) != 0) \
+ return err; \
+ }
+
uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset);
const char *_fdt_find_string(const char *strtab, int tabsize, const char *s);
int _fdt_node_end_offset(void *fdt, int nodeoffset);
diff --git a/nand_spl/board/amcc/canyonlands/Makefile b/nand_spl/board/amcc/canyonlands/Makefile
new file mode 100644
index 0000000..1ec1112
--- /dev/null
+++ b/nand_spl/board/amcc/canyonlands/Makefile
@@ -0,0 +1,105 @@
+#
+# (C) Copyright 2008
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS := start.o
+SOBJS += init.o resetvec.o
+SOBJS += resetvec.o
+COBJS := ddr2_fixed.o
+COBJS += nand_boot.o
+COBJS += nand_ecc.o
+COBJS += ndfc.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+# create symbolic links for common files
+
+# from cpu directory
+$(obj)ndfc.c:
+ @rm -f $(obj)ndfc.c
+ ln -s $(SRCTREE)/cpu/ppc4xx/ndfc.c $(obj)ndfc.c
+
+$(obj)resetvec.S:
+ @rm -f $(obj)resetvec.S
+ ln -s $(SRCTREE)/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+
+$(obj)start.S:
+ @rm -f $(obj)start.S
+ ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S
+
+# from board directory
+$(obj)init.S:
+ @rm -f $(obj)init.S
+ ln -s $(SRCTREE)/board/amcc/canyonlands/init.S $(obj)init.S
+
+# from nand_spl directory
+$(obj)nand_boot.c:
+ @rm -f $(obj)nand_boot.c
+ ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
+
+# from drivers/mtd/nand directory
+$(obj)nand_ecc.c:
+ @rm -f $(obj)nand_ecc.c
+ ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/amcc/canyonlands/config.mk b/nand_spl/board/amcc/canyonlands/config.mk
new file mode 100644
index 0000000..6dad876
--- /dev/null
+++ b/nand_spl/board/amcc/canyonlands/config.mk
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2008
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# AMCC 460EX Reference Platform (Canyonlands) board
+#
+
+#
+# TEXT_BASE for SPL:
+#
+# On 460EX platforms the SPL is located at 0xfffff000...0xffffffff,
+# in the last 4kBytes of memory space in cache.
+# We will copy this SPL into internal SRAM in start.S. So we set
+# TEXT_BASE to starting address in internal SRAM here.
+#
+TEXT_BASE = 0xE3003000
+
+# PAD_TO used to generate a 16kByte binary needed for the combined image
+# -> PAD_TO = TEXT_BASE + 0x4000
+PAD_TO = 0xE3007000
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/nand_spl/board/amcc/canyonlands/ddr2_fixed.c b/nand_spl/board/amcc/canyonlands/ddr2_fixed.c
new file mode 100644
index 0000000..48708a8
--- /dev/null
+++ b/nand_spl/board/amcc/canyonlands/ddr2_fixed.c
@@ -0,0 +1,96 @@
+/*
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+static void wait_init_complete(void)
+{
+ u32 val;
+
+ do {
+ mfsdram(SDRAM_MCSTAT, val);
+ } while (!(val & 0x80000000));
+}
+
+long int initdram(int board_type)
+{
+ /*
+ * Reset the DDR-SDRAM controller.
+ */
+ mtsdr(SDR0_SRST, (0x80000000 >> 10));
+ mtsdr(SDR0_SRST, 0x00000000);
+
+ /*
+ * These values are cloned from a running NOR booting
+ * Canyonlands with SPD-DDR2 detection and calibration
+ * enabled. This will only work for the same memory
+ * configuration as used here:
+ *
+ * Crucial CT3264AC53E.4FD - 256MB SO-DIMM
+ *
+ */
+ mtsdram(SDRAM_MCOPT2, 0x00000000);
+ mtsdram(SDRAM_MCOPT1, 0x05122000);
+ mtsdram(SDRAM_MODT0, 0x01000000);
+ mtsdram(SDRAM_CODT, 0x00800021);
+ mtsdram(SDRAM_WRDTR, 0x82000823);
+ mtsdram(SDRAM_CLKTR, 0x40000000);
+ mtsdram(SDRAM_MB0CF, 0x00000201);
+ mtsdram(SDRAM_RTR, 0x06180000);
+ mtsdram(SDRAM_SDTR1, 0x80201000);
+ mtsdram(SDRAM_SDTR2, 0x42103243);
+ mtsdram(SDRAM_SDTR3, 0x0A0D0D16);
+ mtsdram(SDRAM_MMODE, 0x00000632);
+ mtsdram(SDRAM_MEMODE, 0x00000040);
+ mtsdram(SDRAM_INITPLR0, 0xB5380000);
+ mtsdram(SDRAM_INITPLR1, 0x82100400);
+ mtsdram(SDRAM_INITPLR2, 0x80820000);
+ mtsdram(SDRAM_INITPLR3, 0x80830000);
+ mtsdram(SDRAM_INITPLR4, 0x80810040);
+ mtsdram(SDRAM_INITPLR5, 0x80800532);
+ mtsdram(SDRAM_INITPLR6, 0x82100400);
+ mtsdram(SDRAM_INITPLR7, 0x8A080000);
+ mtsdram(SDRAM_INITPLR8, 0x8A080000);
+ mtsdram(SDRAM_INITPLR9, 0x8A080000);
+ mtsdram(SDRAM_INITPLR10, 0x8A080000);
+ mtsdram(SDRAM_INITPLR11, 0x80000432);
+ mtsdram(SDRAM_INITPLR12, 0x808103C0);
+ mtsdram(SDRAM_INITPLR13, 0x80810040);
+ mtsdram(SDRAM_INITPLR14, 0x00000000);
+ mtsdram(SDRAM_INITPLR15, 0x00000000);
+
+ mtsdram(SDRAM_MCOPT2, 0x28000000);
+
+ wait_init_complete();
+
+ mtdcr(SDRAM_R0BAS, 0x0000F800); /* MQ0_B0BAS */
+
+ mtsdram(SDRAM_RDCC, 0x40000000);
+ mtsdram(SDRAM_RQDC, 0x80000038);
+ mtsdram(SDRAM_RFDC, 0x00000257);
+
+ return CFG_MBYTES_SDRAM << 20;
+}
diff --git a/nand_spl/board/amcc/canyonlands/u-boot.lds b/nand_spl/board/amcc/canyonlands/u-boot.lds
new file mode 100644
index 0000000..5bffb5b
--- /dev/null
+++ b/nand_spl/board/amcc/canyonlands/u-boot.lds
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc:common)
+SECTIONS
+{
+ .resetvec 0xE3003FFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .text :
+ {
+ start.o (.text)
+ init.o (.text)
+ nand_boot.o (.text)
+ ddr2_fixed.o (.text)
+ ndfc.o (.text)
+
+ *(.text)
+ *(.fixup)
+ }
+ _etext = .;
+
+ .data :
+ {
+ *(.rodata*)
+ *(.data*)
+ *(.sdata*)
+ __got2_start = .;
+ *(.got2)
+ __got2_end = .;
+ }
+
+ _edata = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss)
+ *(.bss)
+ }
+
+ _end = . ;
+}
diff --git a/onenand_ipl/board/apollon/Makefile b/onenand_ipl/board/apollon/Makefile
index 66a0959..f10ed02 100644
--- a/onenand_ipl/board/apollon/Makefile
+++ b/onenand_ipl/board/apollon/Makefile
@@ -9,7 +9,7 @@
CFLAGS += -DCONFIG_ONENAND_IPL
OBJCLFAGS += --gap-fill=0x00
-SOBJS = start.o low_levelinit.o # _memcpy32.o
+SOBJS = start.o low_levelinit.o
COBJS = apollon.o onenand_read.o onenand_boot.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
@@ -19,13 +19,16 @@
onenandobj := $(OBJTREE)/onenand_ipl/
-ALL = $(onenandobj)onenand-ipl $(onenandobj)onenand-ipl.bin $(onenandobj)onenand-ipl-2k.bin
+ALL = $(onenandobj)onenand-ipl $(onenandobj)onenand-ipl.bin $(onenandobj)onenand-ipl-2k.bin $(onenandobj)onenand-ipl-4k.bin
all: $(obj).depend $(ALL)
$(onenandobj)onenand-ipl-2k.bin: $(onenandobj)onenand-ipl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=0x800 -O binary $< $@
+$(onenandobj)onenand-ipl-4k.bin: $(onenandobj)onenand-ipl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=0x1000 -O binary $< $@
+
$(onenandobj)onenand-ipl.bin: $(onenandobj)onenand-ipl
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
diff --git a/onenand_ipl/onenand_boot.c b/onenand_ipl/onenand_boot.c
index f30deae..35668ac 100644
--- a/onenand_ipl/onenand_boot.c
+++ b/onenand_ipl/onenand_boot.c
@@ -60,7 +60,7 @@
buf = (uchar *) CFG_LOAD_ADDR;
- if (!onenand_read_block(buf, ONENAND_START_BLOCK))
+ if (!onenand_read_block0(buf))
buf += ONENAND_BLOCK_SIZE;
if (buf == (uchar *)CFG_LOAD_ADDR)
diff --git a/onenand_ipl/onenand_ipl.h b/onenand_ipl/onenand_ipl.h
index b9c6669..9188b96 100644
--- a/onenand_ipl/onenand_ipl.h
+++ b/onenand_ipl/onenand_ipl.h
@@ -23,7 +23,6 @@
#include <linux/mtd/onenand_regs.h>
-#define ONENAND_START_BLOCK 0
#define ONENAND_BLOCK_SIZE 2048
#ifndef CFG_PRINTF
@@ -40,5 +39,5 @@
#define ONENAND_PAGE_SIZE 2048
-extern int onenand_read_block(unsigned char *buf, ulong block);
+extern int onenand_read_block0(unsigned char *buf);
#endif
diff --git a/onenand_ipl/onenand_read.c b/onenand_ipl/onenand_read.c
index f553220..669b1ef 100644
--- a/onenand_ipl/onenand_read.c
+++ b/onenand_ipl/onenand_read.c
@@ -33,8 +33,13 @@
#define onenand_buffer_address() ((1 << 3) << 8)
#define onenand_bufferram_address(block) (0)
+#ifdef __HAVE_ARCH_MEMCPY32
+extern void *memcpy32(void *dest, void *src, int size);
+#endif
+
/* read a page with ECC */
-static inline int onenand_read_page(ulong block, ulong page, u_char *buf)
+static inline int onenand_read_page(ulong block, ulong page,
+ u_char * buf, int pagesize)
{
unsigned long *base;
@@ -46,15 +51,15 @@
onenand_writew(onenand_block_address(block),
THIS_ONENAND(ONENAND_REG_START_ADDRESS1));
+ onenand_writew(onenand_bufferram_address(block),
+ THIS_ONENAND(ONENAND_REG_START_ADDRESS2));
+
onenand_writew(onenand_sector_address(page),
THIS_ONENAND(ONENAND_REG_START_ADDRESS8));
onenand_writew(onenand_buffer_address(),
THIS_ONENAND(ONENAND_REG_START_BUFFER));
- onenand_writew(onenand_bufferram_address(block),
- THIS_ONENAND(ONENAND_REG_START_ADDRESS2));
-
onenand_writew(ONENAND_INT_CLEAR, THIS_ONENAND(ONENAND_REG_INTERRUPT));
onenand_writew(ONENAND_CMD_READ, THIS_ONENAND(ONENAND_REG_COMMAND));
@@ -69,9 +74,9 @@
#ifdef __HAVE_ARCH_MEMCPY32
/* 32 bytes boundary memory copy */
- memcpy32(buf, base, ONENAND_PAGE_SIZE);
+ memcpy32(buf, base, pagesize);
#else
- for (offset = 0; offset < (ONENAND_PAGE_SIZE >> 2); offset++) {
+ for (offset = 0; offset < (pagesize >> 2); offset++) {
value = *(base + offset);
*p++ = value;
}
@@ -87,18 +92,22 @@
* onenand_read_block - Read a block data to buf
* @return 0 on success
*/
-int onenand_read_block(unsigned char *buf, ulong block)
+int onenand_read_block0(unsigned char *buf)
{
int page, offset = 0;
+ int pagesize = ONENAND_PAGE_SIZE;
+
+ /* MLC OneNAND has 4KiB page size */
+ if (onenand_readw(THIS_ONENAND(ONENAND_REG_TECHNOLOGY)))
+ pagesize <<= 1;
/* NOTE: you must read page from page 1 of block 0 */
/* read the block page by page*/
for (page = ONENAND_START_PAGE;
page < ONENAND_PAGES_PER_BLOCK; page++) {
- onenand_read_page(block, page, buf + offset);
-
- offset += ONENAND_PAGE_SIZE;
+ onenand_read_page(0, page, buf + offset, pagesize);
+ offset += pagesize;
}
return 0;
diff --git a/post/board/lwmon5/Makefile b/post/board/lwmon5/Makefile
new file mode 100644
index 0000000..5a92d1c
--- /dev/null
+++ b/post/board/lwmon5/Makefile
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+#
+# Developed for DENX Software Engineering GmbH
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+LIB = libpostlwmon5.a
+
+COBJS = sysmon.o watchdog.o dspic.o fpga.o dsp.o gdc.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/post/board/lwmon5/dsp.c b/post/board/lwmon5/dsp.c
new file mode 100644
index 0000000..1946f09
--- /dev/null
+++ b/post/board/lwmon5/dsp.c
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+ *
+ * Developed for DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+
+#if CONFIG_POST & CFG_POST_DSP
+#include <asm/io.h>
+
+/* This test verifies DSP status bits in FPGA */
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DSP_STATUS_REG 0xC4000008
+
+int dsp_post_test(int flags)
+{
+ uint read_value;
+ int ret;
+
+ ret = 0;
+ read_value = in_be32((void *)DSP_STATUS_REG) & 0x3;
+ if (read_value != 0x3) {
+ post_log("\nDSP status read %08X\n", read_value);
+ ret = 1;
+ }
+
+ return ret;
+}
+
+#endif /* CONFIG_POST & CFG_POST_DSP */
+#endif /* CONFIG_POST */
diff --git a/post/board/lwmon5/dspic.c b/post/board/lwmon5/dspic.c
new file mode 100644
index 0000000..fcbbc60
--- /dev/null
+++ b/post/board/lwmon5/dspic.c
@@ -0,0 +1,110 @@
+/*
+ * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+ *
+ * Developed for DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+/* There are two tests for dsPIC currently implemented:
+ * 1. dsPIC ready test. Done in board_early_init_f(). Only result verified here.
+ * 2. dsPIC POST result test. This test gets dsPIC POST codes and version.
+ */
+
+#include <post.h>
+
+#include <i2c.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DSPIC_POST_ERROR_REG 0x800
+#define DSPIC_SYS_ERROR_REG 0x802
+#define DSPIC_VERSION_REG 0x804
+
+#if CONFIG_POST & CFG_POST_BSPEC1
+
+/* Verify that dsPIC ready test done early at hw init passed ok */
+int dspic_init_post_test(int flags)
+{
+ if (in_be32((void *)CFG_DSPIC_TEST_ADDR) & CFG_DSPIC_TEST_MASK) {
+ post_log("dsPIC init test failed\n");
+ return 1;
+ }
+
+ return 0;
+}
+
+#endif /* CONFIG_POST & CFG_POST_BSPEC1 */
+
+#if CONFIG_POST & CFG_POST_BSPEC2
+/* Read a register from the dsPIC. */
+int dspic_read(ushort reg, ushort *data)
+{
+ uchar buf[sizeof(*data)];
+ int rval;
+
+ rval = i2c_read(CFG_I2C_DSPIC_IO_ADDR, reg, sizeof(reg),
+ buf, sizeof(*data));
+
+ *data = (buf[0] << 8) | buf[1];
+
+ return rval;
+}
+
+/* Verify error codes regs, display version */
+int dspic_post_test(int flags)
+{
+ ushort data;
+ int ret = 0;
+
+ post_log("\n");
+ if (dspic_read(DSPIC_VERSION_REG, &data)) {
+ post_log("dsPIC : failed read version\n");
+ ret = 1;
+ } else {
+ post_log("dsPIC version: %u.%u\n",
+ (data >> 8) & 0xFF, data & 0xFF);
+ }
+
+ if (dspic_read(DSPIC_POST_ERROR_REG, &data)) {
+ post_log("dsPIC : failed read POST code\n");
+ } else {
+ post_log("dsPIC POST code 0x%04X\n", data);
+ }
+ if (data != 0)
+ ret = 1;
+
+ if (dspic_read(DSPIC_SYS_ERROR_REG, &data)) {
+ post_log("dsPIC : failed read system error\n");
+ ret = 1;
+ } else if (data != 0) {
+ post_log("dsPIC SYS-ERROR code: 0x%04X\n", data);
+ ret = 1;
+ }
+
+ return ret;
+}
+
+#endif /* CONFIG_POST & CFG_POST_BSPEC2 */
+#endif /* CONFIG_POST */
diff --git a/post/board/lwmon5/fpga.c b/post/board/lwmon5/fpga.c
new file mode 100644
index 0000000..2d95b5e
--- /dev/null
+++ b/post/board/lwmon5/fpga.c
@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+ *
+ * Developed for DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+/* This test performs testing of FPGA SCRATCH register,
+ * gets FPGA version and run get_ram_size() on FPGA memory
+ */
+
+#include <post.h>
+
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define FPGA_SCRATCH_REG 0xC4000050
+#define FPGA_VERSION_REG 0xC4000040
+#define FPGA_RAM_START 0xC4200000
+#define FPGA_RAM_END 0xC4203FFF
+#define FPGA_STAT 0xC400000C
+
+#if CONFIG_POST & CFG_POST_BSPEC3
+
+static int one_scratch_test(uint value)
+{
+ uint read_value;
+ int ret = 0;
+
+ out_be32((void *)FPGA_SCRATCH_REG, value);
+ /* read other location (protect against data lines capacity) */
+ ret = in_be16((void *)FPGA_VERSION_REG);
+ /* verify test pattern */
+ read_value = in_be32((void *)FPGA_SCRATCH_REG);
+ if (read_value != value) {
+ post_log("FPGA SCRATCH test failed write %08X, read %08X\n",
+ value, read_value);
+ ret = 1;
+ }
+
+ return ret;
+}
+
+/* Verify FPGA, get version & memory size */
+int fpga_post_test(int flags)
+{
+ uint old_value;
+ ushort version;
+ uint read_value;
+ int ret = 0;
+
+ post_log("\n");
+ old_value = in_be32((void *)FPGA_SCRATCH_REG);
+
+ if (one_scratch_test(0x55555555))
+ ret = 1;
+ if (one_scratch_test(0xAAAAAAAA))
+ ret = 1;
+
+ out_be32((void *)FPGA_SCRATCH_REG, old_value);
+
+ version = in_be16((void *)FPGA_VERSION_REG);
+ post_log("FPGA : version %u.%u\n",
+ (version >> 8) & 0xFF, version & 0xFF);
+
+ /* Enable write to FPGA RAM */
+ out_be32((void *)FPGA_STAT, in_be32((void *)FPGA_STAT) | 0x1000);
+
+ read_value = get_ram_size((void *)CFG_FPGA_BASE_1, 0x4000);
+ post_log("FPGA RAM size: %d bytes\n", read_value);
+
+ return ret;
+}
+
+#endif /* CONFIG_POST & CFG_POST_BSPEC3 */
+#endif /* CONFIG_POST */
diff --git a/post/board/lwmon5/gdc.c b/post/board/lwmon5/gdc.c
new file mode 100644
index 0000000..4af6a7a
--- /dev/null
+++ b/post/board/lwmon5/gdc.c
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+ *
+ * Developed for DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+/* This test attempts to verify board GDC. A scratch register tested, then
+ * simple memory test (get_ram_size()) run over GDC memory.
+ */
+
+#include <post.h>
+
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define GDC_SCRATCH_REG 0xC1FF8044
+#define GDC_VERSION_REG 0xC1FF8084
+#define GDC_RAM_START 0xC0000000
+#define GDC_RAM_END 0xC2000000
+
+#if CONFIG_POST & CFG_POST_BSPEC4
+
+static int gdc_test_reg_one(uint value)
+{
+ int ret;
+ uint read_value;
+
+ /* write test pattern */
+ out_be32((void *)GDC_SCRATCH_REG, value);
+ /* read other location (protect against data lines capacity) */
+ ret = in_be32((void *)GDC_RAM_START);
+ /* verify test pattern */
+ read_value = in_be32((void *)GDC_SCRATCH_REG);
+ if (read_value != value) {
+ post_log("GDC SCRATCH test failed write %08X, read %08X\n",
+ value, read_value);
+ }
+
+ return (read_value != value);
+}
+
+/* Verify GDC, get memory size */
+int gdc_post_test(int flags)
+{
+ uint old_value;
+ int ret = 0;
+
+ post_log("\n");
+ old_value = in_be32((void *)GDC_SCRATCH_REG);
+
+ /*
+ * GPIOC2 register behaviour: the LIME graphics processor has a
+ * maximum of 5 GPIO ports that can be used in this hardware
+ * configuration. Thus only the bits for these 5 GPIOs can be
+ * activated in the GPIOC2 register. All other bits will always be
+ * read as zero.
+ */
+ if (gdc_test_reg_one(0x00150015))
+ ret = 1;
+ if (gdc_test_reg_one(0x000A000A))
+ ret = 1;
+
+ out_be32((void *)GDC_SCRATCH_REG, old_value);
+
+ old_value = in_be32((void *)GDC_VERSION_REG);
+ post_log("GDC chip version %u.%u, year %04X\n",
+ (old_value >> 8) & 0xFF, old_value & 0xFF,
+ (old_value >> 16) & 0xFFFF);
+
+ old_value = get_ram_size((void *)GDC_RAM_START,
+ GDC_RAM_END - GDC_RAM_START);
+ post_log("GDC RAM size: %d bytes\n", old_value);
+
+ return ret;
+}
+#endif /* CONFIG_POST & CFG_POST_BSPEC4 */
+#endif /* CONFIG_POST */
diff --git a/post/board/lwmon5/sysmon.c b/post/board/lwmon5/sysmon.c
new file mode 100644
index 0000000..0cf1cf2
--- /dev/null
+++ b/post/board/lwmon5/sysmon.c
@@ -0,0 +1,259 @@
+/*
+ * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+ *
+ * Developed for DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <post.h>
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+/*
+ * SYSMON test
+ *
+ * This test performs the system hardware monitoring.
+ * The test passes when all the following voltages and temperatures
+ * are within allowed ranges:
+ *
+ * Temperature -40 .. +85 C
+ * +5V +4.75 .. +5.25 V
+ * +5V standby +4.75 .. +5.25 V
+ *
+ * LCD backlight is not enabled if temperature values are not within
+ * allowed ranges (-30 .. + 80). The brightness of backlite can be
+ * controlled by setting "brightness" enviroment variable. Default value is 50%
+ *
+ * See the list of all parameters in the sysmon_table below
+ */
+
+#include <post.h>
+#include <watchdog.h>
+#include <i2c.h>
+
+#if defined(CONFIG_VIDEO)
+#include <mb862xx.h>
+#endif
+
+#if CONFIG_POST & CFG_POST_SYSMON
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* from dspic.c */
+extern int dspic_read(ushort reg, ushort *data);
+
+#define RELOC(x) if (x != NULL) x = (void *) ((ulong) (x) + gd->reloc_off)
+
+typedef struct sysmon_s sysmon_t;
+typedef struct sysmon_table_s sysmon_table_t;
+
+static void sysmon_dspic_init (sysmon_t * this);
+static int sysmon_dspic_read (sysmon_t * this, uint addr);
+static int sysmon_dspic_read_sgn (sysmon_t * this, uint addr);
+static void sysmon_backlight_disable (sysmon_table_t * this);
+
+struct sysmon_s
+{
+ uchar chip;
+ void (*init)(sysmon_t *);
+ int (*read)(sysmon_t *, uint);
+};
+
+static sysmon_t sysmon_dspic =
+ {CFG_I2C_DSPIC_IO_ADDR, sysmon_dspic_init, sysmon_dspic_read};
+
+static sysmon_t sysmon_dspic_sgn =
+ {CFG_I2C_DSPIC_IO_ADDR, sysmon_dspic_init, sysmon_dspic_read_sgn};
+
+static sysmon_t * sysmon_list[] =
+{
+ &sysmon_dspic,
+ &sysmon_dspic_sgn,
+ NULL
+};
+
+struct sysmon_table_s
+{
+ char * name;
+ char * unit_name;
+ sysmon_t * sysmon;
+ void (*exec_before)(sysmon_table_t *);
+ void (*exec_after)(sysmon_table_t *);
+
+ int unit_precision;
+ int unit_div;
+ int unit_min;
+ int unit_max;
+ uint val_mask;
+ uint val_min;
+ uint val_max;
+ int val_valid;
+ uint val_min_alt;
+ uint val_max_alt;
+ int val_valid_alt;
+ uint addr;
+};
+
+static sysmon_table_t sysmon_table[] =
+{
+ {"Temperature", " C", &sysmon_dspic_sgn, NULL, sysmon_backlight_disable,
+ 1, 1, -32768, 32767, 0xFFFF, 0x8000-40, 0x8000+85, 0,
+ 0x8000-30, 0x8000+80, 0, 0x12BC},
+
+ {"+ 5 V", "V", &sysmon_dspic, NULL, NULL,
+ 100, 1000, 0, 0xFFFF, 0xFFFF, 4750, 5250, 0,
+ 4750, 5250, 0, 0x12CA},
+
+ {"+ 5 V standby", "V", &sysmon_dspic, NULL, NULL,
+ 100, 1000, 0, 0xFFFF, 0xFFFF, 4750, 5250, 0,
+ 4750, 5250, 0, 0x12C6},
+};
+static int sysmon_table_size = sizeof(sysmon_table) / sizeof(sysmon_table[0]);
+
+int sysmon_init_f (void)
+{
+ sysmon_t ** l;
+
+ for (l = sysmon_list; *l; l++)
+ (*l)->init(*l);
+
+ return 0;
+}
+
+void sysmon_reloc (void)
+{
+ sysmon_t ** l;
+ sysmon_table_t * t;
+
+ for (l = sysmon_list; *l; l++) {
+ RELOC(*l);
+ RELOC((*l)->init);
+ RELOC((*l)->read);
+ }
+
+ for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) {
+ RELOC(t->exec_before);
+ RELOC(t->exec_after);
+ RELOC(t->sysmon);
+ }
+}
+
+static char *sysmon_unit_value (sysmon_table_t *s, uint val)
+{
+ static char buf[32];
+ char *p, sign;
+ int decimal, frac;
+ int unit_val =
+ s->unit_min + (s->unit_max - s->unit_min) * val / s->val_mask;
+
+ if (val == -1)
+ return "I/O ERROR";
+
+ if (unit_val < 0) {
+ sign = '-';
+ unit_val = -unit_val;
+ } else
+ sign = '+';
+
+ p = buf + sprintf(buf, "%c%2d", sign, unit_val / s->unit_div);
+
+
+ frac = unit_val % s->unit_div;
+
+ frac /= (s->unit_div / s->unit_precision);
+
+ decimal = s->unit_precision;
+
+ if (decimal != 1)
+ *p++ = '.';
+ for (decimal /= 10; decimal != 0; decimal /= 10)
+ *p++ = '0' + (frac / decimal) % 10;
+ strcpy(p, s->unit_name);
+
+ return buf;
+}
+
+static void sysmon_dspic_init (sysmon_t * this)
+{
+}
+
+static int sysmon_dspic_read (sysmon_t * this, uint addr)
+{
+ ushort data;
+
+ return (dspic_read(addr, &data)) ? -1 : data;
+}
+
+static int sysmon_dspic_read_sgn (sysmon_t * this, uint addr)
+{
+ ushort data;
+
+ /* To fit into the table range we should add 0x8000 */
+ return (dspic_read(addr, &data)) ? -1 :
+ (signed short)data + 0x8000;
+}
+
+static void sysmon_backlight_disable (sysmon_table_t * this)
+{
+#if defined(CONFIG_VIDEO)
+ board_backlight_switch(this->val_valid_alt);
+#endif
+}
+
+int sysmon_post_test (int flags)
+{
+ int res = 0;
+ sysmon_table_t * t;
+ int val;
+
+ for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) {
+ if (t->exec_before)
+ t->exec_before(t);
+
+ val = t->sysmon->read(t->sysmon, t->addr);
+ if (val != -1) {
+ t->val_valid = val >= t->val_min && val <= t->val_max;
+ t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt;
+ } else {
+ t->val_valid = 0;
+ t->val_valid_alt = 0;
+ }
+
+ if (t->exec_after)
+ t->exec_after(t);
+
+ if ((!t->val_valid) || (flags & POST_MANUAL)) {
+ printf("%-17s = %-10s ", t->name, sysmon_unit_value(t, val));
+ printf("allowed range");
+ printf(" %-8s ..", sysmon_unit_value(t, t->val_min));
+ printf(" %-8s", sysmon_unit_value(t, t->val_max));
+ printf(" %s\n", t->val_valid ? "OK" : "FAIL");
+ }
+
+ if (!t->val_valid)
+ res = 1;
+ }
+
+ return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_SYSMON */
+#endif /* CONFIG_POST */
diff --git a/post/board/lwmon5/watchdog.c b/post/board/lwmon5/watchdog.c
new file mode 100644
index 0000000..48ff687
--- /dev/null
+++ b/post/board/lwmon5/watchdog.c
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+ *
+ * Developed for DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * This test verifies if the reason of last reset was an abnormal voltage
+ * condition, than it performs watchdog test, measuing time required to
+ * trigger watchdog reset.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_WATCHDOG
+
+#include <watchdog.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+static uint watchdog_magic_read(void)
+{
+ return in_be32((void *)CFG_WATCHDOG_FLAGS_ADDR) &
+ CFG_WATCHDOG_MAGIC_MASK;
+}
+
+static void watchdog_magic_write(uint value)
+{
+ out_be32((void *)CFG_WATCHDOG_FLAGS_ADDR, value |
+ (in_be32((void *)CFG_WATCHDOG_FLAGS_ADDR) &
+ ~CFG_WATCHDOG_MAGIC_MASK));
+}
+
+int sysmon1_post_test(int flags)
+{
+ if (gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS)) {
+ /*
+ * 3.1. GPIO62 is low
+ * Assuming system voltage failure.
+ */
+ post_log("Abnormal voltage detected (GPIO62)\n");
+ return 1;
+ }
+
+ return 0;
+}
+
+int lwmon5_watchdog_post_test(int flags)
+{
+ ulong time;
+
+ /* On each reset scratch register 1 should be tested,
+ * but first test GPIO62:
+ */
+ if (!(flags & POST_MANUAL) && sysmon1_post_test(flags)) {
+ /*
+ * 3.1. GPIO62 is low
+ * Assuming system voltage failure.
+ */
+ /* 3.1.1. Set scratch register 1 to 0x0000xxxx */
+ watchdog_magic_write(0);
+ /* 3.1.2. Mark test as failed due to voltage?! */
+ return 1;
+ }
+
+ if (watchdog_magic_read() != CFG_WATCHDOG_MAGIC) {
+ /*
+ * 3.2. Scratch register 1 differs from magic value 0x1248xxxx
+ * Assuming PowerOn
+ */
+ int ints;
+ ulong base;
+
+ /* 3.2.1. Set magic value to scratch register */
+ watchdog_magic_write(CFG_WATCHDOG_MAGIC);
+
+ ints = disable_interrupts ();
+ /* 3.2.2. strobe watchdog once */
+ WATCHDOG_RESET();
+ out_be32((void *)CFG_WATCHDOG_TIME_ADDR, 0);
+ /* 3.2.3. save time of strobe in scratch register 2 */
+ base = post_time_ms (0);
+
+ /* 3.2.4. Wait for 150 ms (enough for reset to happen) */
+ while ((time = post_time_ms (base)) < 150)
+ out_be32((void *)CFG_WATCHDOG_TIME_ADDR, time);
+ if (ints)
+ enable_interrupts ();
+
+ /*
+ * 3.2.5. Reset didn't happen. - Set 0x0000xxxx
+ * into scratch register 1
+ */
+ watchdog_magic_write(0);
+ /* 3.2.6. Mark test as failed. */
+ post_log("hw watchdog time : %u ms, failed ", time);
+ return 2;
+ }
+
+ /*
+ * 3.3. Scratch register matches magic value 0x1248xxxx
+ * Assume this is watchdog-initiated reset
+ */
+ /* 3.3.1. So, the test succeed, save measured time to syslog. */
+ time = in_be32((void *)CFG_WATCHDOG_TIME_ADDR);
+ post_log("hw watchdog time : %u ms, passed ", time);
+ /* 3.3.2. Set scratch register 1 to 0x0000xxxx */
+ watchdog_magic_write(0);
+
+ return 0;
+}
+
+#endif /* CONFIG_POST & CFG_POST_WATCHDOG */
+#endif /* CONFIG_POST */
diff --git a/post/cpu/ppc4xx/cache.c b/post/cpu/ppc4xx/cache.c
index c86a150..466ca92 100644
--- a/post/cpu/ppc4xx/cache.c
+++ b/post/cpu/ppc4xx/cache.c
@@ -42,8 +42,6 @@
#define CACHE_POST_SIZE 1024
-void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
-
int cache_post_test1 (int tlb, void *p, int size);
int cache_post_test2 (int tlb, void *p, int size);
int cache_post_test3 (int tlb, void *p, int size);
diff --git a/post/drivers/rtc.c b/post/drivers/rtc.c
index 7d4f9b8..e3da5e6 100644
--- a/post/drivers/rtc.c
+++ b/post/drivers/rtc.c
@@ -28,6 +28,8 @@
*
* The Real Time Clock (RTC) operation is verified by this test.
* The following features are verified:
+ * o) RTC Power Fault
+ * This is verified by analyzing the rtc_get() return status.
* o) Time uniformity
* This is verified by reading RTC in polling within
* a short period of time.
@@ -96,6 +98,10 @@
unsigned int ynl = 1999;
unsigned int yl = 2000;
unsigned int skipped = 0;
+ int reliable;
+
+ /* Time reliability */
+ reliable = rtc_get (&svtm);
/* Time uniformity */
if (rtc_post_skip (&diff) != 0) {
@@ -176,6 +182,15 @@
}
rtc_post_restore (&svtm, skipped);
+ /* If come here, then RTC operates correcty, check the correctness
+ * of the time it reports.
+ */
+ if (reliable < 0) {
+ post_log ("RTC Time is not reliable! Power fault? \n");
+
+ return -1;
+ }
+
return 0;
}
diff --git a/post/post.c b/post/post.c
index 4ff75ee..1df0657 100644
--- a/post/post.c
+++ b/post/post.c
@@ -157,8 +157,10 @@
static void post_get_flags (int *test_flags)
{
- int flag[] = { POST_POWERON, POST_NORMAL, POST_SLOWTEST };
- char *var[] = { "post_poweron", "post_normal", "post_slowtest" };
+ int flag[] = { POST_POWERON, POST_NORMAL, POST_SLOWTEST,
+ POST_CRITICAL };
+ char *var[] = { "post_poweron", "post_normal", "post_slowtest",
+ "post_critical" };
int varnum = sizeof (var) / sizeof (var[0]);
char list[128]; /* long enough for POST list */
char *name;
@@ -224,7 +226,9 @@
if (!(flags & POST_REBOOT)) {
if ((test_flags & POST_REBOOT) && !(flags & POST_MANUAL)) {
- post_bootmode_test_on (i);
+ post_bootmode_test_on (
+ (gd->flags & GD_FLG_POSTFAIL) ?
+ POST_FAIL_SAVE | i : i);
}
if (test_flags & POST_PREREL)
@@ -236,10 +240,14 @@
if (test_flags & POST_PREREL) {
if ((*test->test) (flags) == 0)
post_log_mark_succ ( test->testid );
+ else if (test_flags & POST_CRITICAL)
+ gd->flags |= GD_FLG_POSTFAIL;
} else {
if ((*test->test) (flags) != 0) {
post_log ("FAILED\n");
show_boot_progress (-32);
+ if (test_flags & POST_CRITICAL)
+ gd->flags |= GD_FLG_POSTFAIL;
}
else
post_log ("PASSED\n");
@@ -266,6 +274,10 @@
unsigned int last;
if (post_bootmode_get (&last) & POST_POWERTEST) {
+ if (last & POST_FAIL_SAVE) {
+ last &= ~POST_FAIL_SAVE;
+ gd->flags |= GD_FLG_POSTFAIL;
+ }
if (last < post_list_size &&
(flags & test_flags[last] & POST_ALWAYS) &&
(flags & test_flags[last] & POST_MEM)) {
diff --git a/post/tests.c b/post/tests.c
index 698f85c..53d01e3 100644
--- a/post/tests.c
+++ b/post/tests.c
@@ -48,6 +48,13 @@
extern int codec_post_test (int flags);
extern int ecc_post_test (int flags);
+extern int dspic_init_post_test (int flags);
+extern int dspic_post_test (int flags);
+extern int gdc_post_test (int flags);
+extern int fpga_post_test (int flags);
+extern int lwmon5_watchdog_post_test(int flags);
+extern int sysmon1_post_test(int flags);
+
extern int sysmon_init_f (void);
extern void sysmon_reloc (void);
@@ -68,6 +75,9 @@
},
#endif
#if CONFIG_POST & CFG_POST_WATCHDOG
+#if defined(CONFIG_POST_WATCHDOG)
+ CONFIG_POST_WATCHDOG,
+#else
{
"Watchdog timer test",
"watchdog",
@@ -79,6 +89,7 @@
CFG_POST_WATCHDOG
},
#endif
+#endif
#if CONFIG_POST & CFG_POST_I2C
{
"I2C test",
@@ -225,7 +236,7 @@
CFG_POST_DSP
},
#endif
-#if CONFIG_POST & CFG_POST_DSP
+#if CONFIG_POST & CFG_POST_CODEC
{
"CODEC test",
"codec",
@@ -249,6 +260,21 @@
CFG_POST_ECC
},
#endif
+#if CONFIG_POST & CFG_POST_BSPEC1
+ CONFIG_POST_BSPEC1,
+#endif
+#if CONFIG_POST & CFG_POST_BSPEC2
+ CONFIG_POST_BSPEC2,
+#endif
+#if CONFIG_POST & CFG_POST_BSPEC3
+ CONFIG_POST_BSPEC3,
+#endif
+#if CONFIG_POST & CFG_POST_BSPEC4
+ CONFIG_POST_BSPEC4,
+#endif
+#if CONFIG_POST & CFG_POST_BSPEC4
+ CONFIG_POST_BSPEC5,
+#endif
};
unsigned int post_list_size = sizeof (post_list) / sizeof (struct post_test);
diff --git a/tools/setlocalversion b/tools/setlocalversion
index 9a23825..9bbdafd 100755
--- a/tools/setlocalversion
+++ b/tools/setlocalversion
@@ -11,12 +11,15 @@
# Check for git and a git repo.
if head=`git rev-parse --verify HEAD 2>/dev/null`; then
# Do we have an untagged version?
- if [ "`git name-rev --tags HEAD`" = "HEAD undefined" ]; then
- printf '%s%s' -g `echo "$head" | cut -c1-8`
+ if git name-rev --tags HEAD | \
+ grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then
+ git describe | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
fi
# Are there uncommitted changes?
- if git diff-files | read dummy; then
+ git update-index --refresh --unmerged > /dev/null
+ if git diff-index --name-only HEAD | grep -v "^scripts/package" \
+ | read dummy; then
printf '%s' -dirty
fi
fi
