Command usage cleanup
Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index e2af030..a203e0d 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -1214,39 +1214,39 @@
/**************************************************/
U_BOOT_CMD(
md, 3, 1, do_mem_md,
- "md - memory display\n",
+ "memory display",
"[.b, .w, .l] address [# of objects]\n - memory display\n"
);
U_BOOT_CMD(
mm, 2, 1, do_mem_mm,
- "mm - memory modify (auto-incrementing)\n",
+ "memory modify (auto-incrementing)",
"[.b, .w, .l] address\n" " - memory modify, auto increment address\n"
);
U_BOOT_CMD(
nm, 2, 1, do_mem_nm,
- "nm - memory modify (constant address)\n",
+ "memory modify (constant address)",
"[.b, .w, .l] address\n - memory modify, read and keep address\n"
);
U_BOOT_CMD(
mw, 4, 1, do_mem_mw,
- "mw - memory write (fill)\n",
+ "memory write (fill)",
"[.b, .w, .l] address value [count]\n - write memory\n"
);
U_BOOT_CMD(
cp, 4, 1, do_mem_cp,
- "cp - memory copy\n",
+ "memory copy",
"[.b, .w, .l] source target count\n - copy memory\n"
);
U_BOOT_CMD(
cmp, 4, 1, do_mem_cmp,
- "cmp - memory compare\n",
+ "memory compare",
"[.b, .w, .l] addr1 addr2 count\n - compare memory\n"
);
@@ -1254,7 +1254,7 @@
U_BOOT_CMD(
crc32, 4, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
+ "checksum calculation",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
);
@@ -1262,7 +1262,7 @@
U_BOOT_CMD(
crc32, 5, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
+ "checksum calculation",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
"-v address count crc\n - verify crc of memory area\n"
);
@@ -1271,14 +1271,14 @@
U_BOOT_CMD(
base, 2, 1, do_mem_base,
- "base - print or set address offset\n",
+ "print or set address offset",
"\n - print address offset for memory commands\n"
"base off\n - set address offset for memory commands to 'off'\n"
);
U_BOOT_CMD(
loop, 3, 1, do_mem_loop,
- "loop - infinite loop on address range\n",
+ "infinite loop on address range",
"[.b, .w, .l] address number_of_objects\n"
" - loop on a set of addresses\n"
);
@@ -1286,7 +1286,7 @@
#ifdef CONFIG_LOOPW
U_BOOT_CMD(
loopw, 4, 1, do_mem_loopw,
- "loopw - infinite write loop on address range\n",
+ "infinite write loop on address range",
"[.b, .w, .l] address number_of_objects data_to_write\n"
" - loop on a set of addresses\n"
);
@@ -1294,7 +1294,7 @@
U_BOOT_CMD(
mtest, 5, 1, do_mem_mtest,
- "mtest - simple RAM test\n",
+ "simple RAM test",
"[start [end [pattern [iterations]]]]\n"
" - simple RAM read/write test\n"
);
@@ -1302,13 +1302,13 @@
#ifdef CONFIG_MX_CYCLIC
U_BOOT_CMD(
mdc, 4, 1, do_mem_mdc,
- "mdc - memory display cyclic\n",
+ "memory display cyclic",
"[.b, .w, .l] address count delay(ms)\n - memory display cyclic\n"
);
U_BOOT_CMD(
mwc, 4, 1, do_mem_mwc,
- "mwc - memory write cyclic\n",
+ "memory write cyclic",
"[.b, .w, .l] address value delay(ms)\n - memory write cyclic\n"
);
#endif /* CONFIG_MX_CYCLIC */
@@ -1316,7 +1316,7 @@
#ifdef CONFIG_CMD_UNZIP
U_BOOT_CMD(
unzip, 4, 1, do_unzip,
- "unzip - unzip a memory region\n",
+ "unzip a memory region",
"srcaddr dstaddr [dstsize]\n"
);
#endif /* CONFIG_CMD_UNZIP */
