Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).
Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 51aa71f..2606986 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -1201,56 +1201,56 @@
/**************************************************/
#if defined(CONFIG_CMD_MEMORY)
U_BOOT_CMD(
- md, 3, 1, do_mem_md,
- "md - memory display\n",
- "[.b, .w, .l] address [# of objects]\n - memory display\n"
+ md, 3, 1, do_mem_md,
+ "md - memory display\n",
+ "[.b, .w, .l] address [# of objects]\n - memory display\n"
);
U_BOOT_CMD(
- mm, 2, 1, do_mem_mm,
- "mm - memory modify (auto-incrementing)\n",
+ mm, 2, 1, do_mem_mm,
+ "mm - memory modify (auto-incrementing)\n",
"[.b, .w, .l] address\n" " - memory modify, auto increment address\n"
);
U_BOOT_CMD(
- nm, 2, 1, do_mem_nm,
- "nm - memory modify (constant address)\n",
+ nm, 2, 1, do_mem_nm,
+ "nm - memory modify (constant address)\n",
"[.b, .w, .l] address\n - memory modify, read and keep address\n"
);
U_BOOT_CMD(
- mw, 4, 1, do_mem_mw,
- "mw - memory write (fill)\n",
- "[.b, .w, .l] address value [count]\n - write memory\n"
+ mw, 4, 1, do_mem_mw,
+ "mw - memory write (fill)\n",
+ "[.b, .w, .l] address value [count]\n - write memory\n"
);
U_BOOT_CMD(
- cp, 4, 1, do_mem_cp,
- "cp - memory copy\n",
+ cp, 4, 1, do_mem_cp,
+ "cp - memory copy\n",
"[.b, .w, .l] source target count\n - copy memory\n"
);
U_BOOT_CMD(
- cmp, 4, 1, do_mem_cmp,
- "cmp - memory compare\n",
+ cmp, 4, 1, do_mem_cmp,
+ "cmp - memory compare\n",
"[.b, .w, .l] addr1 addr2 count\n - compare memory\n"
);
#ifndef CONFIG_CRC32_VERIFY
U_BOOT_CMD(
- crc32, 4, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
+ crc32, 4, 1, do_mem_crc,
+ "crc32 - checksum calculation\n",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
);
#else /* CONFIG_CRC32_VERIFY */
U_BOOT_CMD(
- crc32, 5, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
+ crc32, 5, 1, do_mem_crc,
+ "crc32 - checksum calculation\n",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
"-v address count crc\n - verify crc of memory area\n"
);
@@ -1258,45 +1258,45 @@
#endif /* CONFIG_CRC32_VERIFY */
U_BOOT_CMD(
- base, 2, 1, do_mem_base,
- "base - print or set address offset\n",
+ base, 2, 1, do_mem_base,
+ "base - print or set address offset\n",
"\n - print address offset for memory commands\n"
"base off\n - set address offset for memory commands to 'off'\n"
);
U_BOOT_CMD(
- loop, 3, 1, do_mem_loop,
- "loop - infinite loop on address range\n",
+ loop, 3, 1, do_mem_loop,
+ "loop - infinite loop on address range\n",
"[.b, .w, .l] address number_of_objects\n"
" - loop on a set of addresses\n"
);
#ifdef CONFIG_LOOPW
U_BOOT_CMD(
- loopw, 4, 1, do_mem_loopw,
- "loopw - infinite write loop on address range\n",
+ loopw, 4, 1, do_mem_loopw,
+ "loopw - infinite write loop on address range\n",
"[.b, .w, .l] address number_of_objects data_to_write\n"
" - loop on a set of addresses\n"
);
#endif /* CONFIG_LOOPW */
U_BOOT_CMD(
- mtest, 4, 1, do_mem_mtest,
- "mtest - simple RAM test\n",
+ mtest, 4, 1, do_mem_mtest,
+ "mtest - simple RAM test\n",
"[start [end [pattern]]]\n"
" - simple RAM read/write test\n"
);
#ifdef CONFIG_MX_CYCLIC
U_BOOT_CMD(
- mdc, 4, 1, do_mem_mdc,
- "mdc - memory display cyclic\n",
+ mdc, 4, 1, do_mem_mdc,
+ "mdc - memory display cyclic\n",
"[.b, .w, .l] address count delay(ms)\n - memory display cyclic\n"
);
U_BOOT_CMD(
- mwc, 4, 1, do_mem_mwc,
- "mwc - memory write cyclic\n",
+ mwc, 4, 1, do_mem_mwc,
+ "mwc - memory write cyclic\n",
"[.b, .w, .l] address value delay(ms)\n - memory write cyclic\n"
);
#endif /* CONFIG_MX_CYCLIC */
