rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/common/cmd_load.c b/common/cmd_load.c
index 1351fe2..65a4d69 100644
--- a/common/cmd_load.c
+++ b/common/cmd_load.c
@@ -58,7 +58,7 @@
int i;
char *env_echo;
int rcode = 0;
-#ifdef CFG_LOADS_BAUD_CHANGE
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
int load_baudrate, current_baudrate;
load_baudrate = current_baudrate = gd->baudrate;
@@ -70,7 +70,7 @@
do_echo = 0;
}
-#ifdef CFG_LOADS_BAUD_CHANGE
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
if (argc >= 2) {
offset = simple_strtol(argv[1], NULL, 16);
}
@@ -93,11 +93,11 @@
break;
}
}
-#else /* ! CFG_LOADS_BAUD_CHANGE */
+#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
if (argc == 2) {
offset = simple_strtol(argv[1], NULL, 16);
}
-#endif /* CFG_LOADS_BAUD_CHANGE */
+#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
printf ("## Ready for S-Record download ...\n");
@@ -123,7 +123,7 @@
load_addr = addr;
}
-#ifdef CFG_LOADS_BAUD_CHANGE
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
if (load_baudrate != current_baudrate) {
printf ("## Switch baudrate to %d bps and press ESC ...\n",
current_baudrate);
@@ -167,7 +167,7 @@
case SREC_DATA3:
case SREC_DATA4:
store_addr = addr + offset;
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
if (addr2info(store_addr)) {
int rc;
@@ -259,7 +259,7 @@
{
ulong offset = 0;
ulong size = 0;
-#ifdef CFG_LOADS_BAUD_CHANGE
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
int save_baudrate, current_baudrate;
save_baudrate = current_baudrate = gd->baudrate;
@@ -268,7 +268,7 @@
if (argc >= 2) {
offset = simple_strtoul(argv[1], NULL, 16);
}
-#ifdef CFG_LOADS_BAUD_CHANGE
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
if (argc >= 3) {
size = simple_strtoul(argv[2], NULL, 16);
}
@@ -291,11 +291,11 @@
break;
}
}
-#else /* ! CFG_LOADS_BAUD_CHANGE */
+#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
if (argc == 3) {
size = simple_strtoul(argv[2], NULL, 16);
}
-#endif /* CFG_LOADS_BAUD_CHANGE */
+#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
printf ("## Ready for S-Record upload, press ENTER to proceed ...\n");
for (;;) {
@@ -307,7 +307,7 @@
} else {
printf ("## S-Record upload complete\n");
}
-#ifdef CFG_LOADS_BAUD_CHANGE
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
if (save_baudrate != current_baudrate) {
printf ("## Switch baudrate to %d bps and press ESC ...\n",
(int)current_baudrate);
@@ -441,8 +441,8 @@
int rcode = 0;
char *s;
- /* pre-set offset from CFG_LOAD_ADDR */
- offset = CFG_LOAD_ADDR;
+ /* pre-set offset from CONFIG_SYS_LOAD_ADDR */
+ offset = CONFIG_SYS_LOAD_ADDR;
/* pre-set offset from $loadaddr */
if ((s = getenv("loadaddr")) != NULL) {
@@ -1001,7 +1001,7 @@
store_addr = addr + offset;
size += res;
addr += res;
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
if (addr2info (store_addr)) {
int rc;
@@ -1042,7 +1042,7 @@
#if defined(CONFIG_CMD_LOADS)
-#ifdef CFG_LOADS_BAUD_CHANGE
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
U_BOOT_CMD(
loads, 3, 0, do_load_serial,
"loads - load S-Record file over serial line\n",
@@ -1051,14 +1051,14 @@
" with offset 'off' and baudrate 'baud'\n"
);
-#else /* ! CFG_LOADS_BAUD_CHANGE */
+#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
U_BOOT_CMD(
loads, 2, 0, do_load_serial,
"loads - load S-Record file over serial line\n",
"[ off ]\n"
" - load S-Record file over serial line with offset 'off'\n"
);
-#endif /* CFG_LOADS_BAUD_CHANGE */
+#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
/*
* SAVES always requires LOADS support, but not vice versa
@@ -1066,7 +1066,7 @@
#if defined(CONFIG_CMD_SAVES)
-#ifdef CFG_LOADS_BAUD_CHANGE
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
U_BOOT_CMD(
saves, 4, 0, do_save_serial,
"saves - save S-Record file over serial line\n",
@@ -1074,14 +1074,14 @@
" - save S-Record file over serial line"
" with offset 'off', size 'size' and baudrate 'baud'\n"
);
-#else /* ! CFG_LOADS_BAUD_CHANGE */
+#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
U_BOOT_CMD(
saves, 3, 0, do_save_serial,
"saves - save S-Record file over serial line\n",
"[ off ] [size]\n"
" - save S-Record file over serial line with offset 'off' and size 'size'\n"
);
-#endif /* CFG_LOADS_BAUD_CHANGE */
+#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
#endif
#endif
