Patches by Murray Jensen, 17 Jun 2003:
- Hymod board database mods: add "who" field and new xilinx chip types
- provide new "init_cmd_timeout()" function so code external to
"common/main.c" can use the "reset_cmd_timeout()" function before
entering the main loop
- add DTT support for adm1021 (new file dtt/adm1021.c; config
slightly different. see include/configs/hymod.h for an example
(requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
CFG_DTT_ADM1021 defined)
- add new "eeprom_probe()" function which has similar args and
behaves in a similar way to "eeprom_read()" etc.
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- gdbtools copyright update
- ensure that set_msr() executes the "sync" and "isync" instructions
after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- 8260 I/O ports fix: Open Drain should be set last when configuring
- add SIU IRQ defines for 8260
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
config.mk to allow board configurations to override the GNU
linker script, selected via the LDSCRIPT, make variable, and to
give an initial value to the OBJCFLAGS make variable
- 8260 i2c enhancement:
o correctly extends the timeout depending on the size of all
queued messages for both transmit and receive
o will not continue with receive if transmit times out
o ensures that the error callback is done for all queued tx
and rx messages
o correctly detects both tx and rx timeouts, only delivers one to
the callback, and does not overwrite an earlier error
o logic in i2c_probe now correct
- add "vprintf()" function so that "panic()" function can be
technically correct
- many Hymod board changes
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 32bab1a..3db0bca 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -327,6 +327,26 @@
return rcode;
}
+#ifndef CONFIG_SPI
+int
+eeprom_probe (unsigned dev_addr, unsigned offset)
+{
+ unsigned char chip;
+
+ /* Probe the chip address
+ */
+#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+ chip = offset >> 8; /* block number */
+#else
+ chip = offset >> 16; /* block number */
+#endif /* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+
+ chip |= dev_addr; /* insert device address */
+
+ return (i2c_probe (chip));
+}
+#endif
+
/*-----------------------------------------------------------------------
* Set default values
*/
diff --git a/common/console.c b/common/console.c
index 86ed584..8c94aa7 100644
--- a/common/console.c
+++ b/common/console.c
@@ -232,6 +232,20 @@
puts (printbuffer);
}
+void vprintf (const char *fmt, va_list args)
+{
+ uint i;
+ char printbuffer[CFG_PBSIZE];
+
+ /* For this to work, printbuffer must be larger than
+ * anything we ever want to print.
+ */
+ i = vsprintf (printbuffer, fmt, args);
+
+ /* Print the string */
+ puts (printbuffer);
+}
+
/* test if ctrl-c was pressed */
static int ctrlc_disabled = 0; /* see disable_ctrl() */
static int ctrlc_was_pressed = 0;
diff --git a/common/main.c b/common/main.c
index 6192dff..f538870 100644
--- a/common/main.c
+++ b/common/main.c
@@ -319,13 +319,7 @@
debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay);
# ifdef CONFIG_BOOT_RETRY_TIME
- s = getenv ("bootretry");
- if (s != NULL)
- retry_time = (int)simple_strtoul(s, NULL, 10);
- else
- retry_time = CONFIG_BOOT_RETRY_TIME;
- if (retry_time >= 0 && retry_time < CONFIG_BOOT_RETRY_MIN)
- retry_time = CONFIG_BOOT_RETRY_MIN;
+ init_cmd_timeout ();
# endif /* CONFIG_BOOT_RETRY_TIME */
s = getenv ("bootcmd");
@@ -422,10 +416,26 @@
#endif /*CFG_HUSH_PARSER*/
}
+#ifdef CONFIG_BOOT_RETRY_TIME
+/***************************************************************************
+ * initialise command line timeout
+ */
+void init_cmd_timeout(void)
+{
+ char *s = getenv ("bootretry");
+
+ if (s != NULL)
+ retry_time = (int)simple_strtoul(s, NULL, 10);
+ else
+ retry_time = CONFIG_BOOT_RETRY_TIME;
+
+ if (retry_time >= 0 && retry_time < CONFIG_BOOT_RETRY_MIN)
+ retry_time = CONFIG_BOOT_RETRY_MIN;
+}
+
/***************************************************************************
* reset command line timeout to retry_time seconds
*/
-#ifdef CONFIG_BOOT_RETRY_TIME
void reset_cmd_timeout(void)
{
endtime = endtick(retry_time);
