Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>

cpu/mcf532x/cpu_init.c

diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c
index 32711a1..5a26ae0 100644
--- a/cpu/mcf532x/cpu_init.c
+++ b/cpu/mcf532x/cpu_init.c
@@ -60,20 +60,6 @@
 	scm2->pacrg = 0;
 	scm1->pacrh = 0;
 
-	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
-	case 0:
-		gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
-		break;
-	case 1:
-		gpio->par_uart =
-		    (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3));
-		break;
-	case 2:
-		gpio->par_uart = (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2);
-		break;
-	}
-
 	/* Port configuration */
 	gpio->par_cs = 0x3E;
 
@@ -124,3 +110,24 @@
 {
 	return (0);
 }
+
+void uart_port_conf(void)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	/* Setup Ports: */
+	switch (CFG_UART_PORT) {
+	case 0:
+		gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
+		break;
+	case 1:
+		gpio->par_uart =
+		    (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3));
+		break;
+	case 2:
+		gpio->par_timer &= 0x0F;
+		gpio->par_timer |= (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2);
+		break;
+	}
+}
+

drivers/serial/mcfuart.c

diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c
index 39d4e18..bc7077d 100644
--- a/drivers/serial/mcfuart.c
+++ b/drivers/serial/mcfuart.c
@@ -34,6 +34,8 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_MCFUART
+extern void uart_port_conf(void);
+
 int serial_init(void)
 {
 	volatile uart_t *uart;
@@ -41,6 +43,8 @@
 
 	uart = (volatile uart_t *)(CFG_UART_BASE);
 
+	uart_port_conf();
+
 	/* write to SICR: SIM2 = uart mode,dcd does not affect rx */
 	uart->ucr = UART_UCR_RESET_RX;
 	uart->ucr = UART_UCR_RESET_TX;