Added M5329AFEE and M5329BFEE Platforms
Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
rtc/mcfrtc.c
Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
lib_m68k/time.c, net/eth.c and rtc/Makefile
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index 6aaf609..1b515a4 100644
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -221,6 +221,7 @@
*/
init_fnc_t *init_sequence[] = {
+ get_clocks,
env_init,
init_baudrate,
serial_init,
@@ -371,6 +372,10 @@
*/
bd->bi_memstart = CFG_SDRAM_BASE; /* start of DRAM memory */
bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
+#ifdef CFG_INIT_RAM_ADDR
+ bd->bi_sramstart = CFG_INIT_RAM_ADDR; /* start of SRAM memory */
+ bd->bi_sramsize = CFG_INIT_RAM_END; /* size of SRAM memory */
+#endif
bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */
bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
@@ -430,6 +435,10 @@
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
+#ifdef CONFIG_SERIAL_MULTI
+ serial_initialize();
+#endif
+
debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
WATCHDOG_RESET ();
@@ -489,7 +498,7 @@
/*
* Setup trap handlers
*/
- trap_init (0);
+ trap_init (CFG_SDRAM_BASE);
#if !defined(CFG_NO_FLASH)
puts ("FLASH: ");
@@ -562,12 +571,48 @@
if (s)
s = (*e) ? e + 1 : e;
}
+#ifdef CONFIG_HAS_ETH1
+ /* handle the 2nd ethernet address */
+
+ s = getenv ("eth1addr");
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enet1addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+#endif
+#ifdef CONFIG_HAS_ETH2
+ /* handle the 3rd ethernet address */
+
+ s = getenv ("eth2addr");
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enet2addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+#endif
+
+#ifdef CONFIG_HAS_ETH3
+ /* handle 4th ethernet address */
+ s = getenv("eth3addr");
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enet3addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+#endif
/* IP Address */
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
WATCHDOG_RESET ();
+#if defined(CONFIG_PCI)
+ /*
+ * Do pci configuration
+ */
+ pci_init ();
+#endif
/** leave this here (after malloc(), environment and PCI are working) **/
/* Initialize devices */
@@ -640,15 +685,33 @@
nand_init(); /* go init the NAND */
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET)
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
WATCHDOG_RESET();
+#if defined(FEC_ENET)
eth_init(bd);
#endif
+#if defined(CONFIG_NET_MULTI)
+ puts ("Net: ");
+ eth_initialize (bd);
+#endif
+#endif
#ifdef CONFIG_POST
post_run (NULL, POST_RAM | post_bootmode_get(0));
#endif
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) && !(CONFIG_COMMANDS & CFG_CMD_IDE)
+ WATCHDOG_RESET ();
+ puts ("PCMCIA:");
+ pcmcia_init ();
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+ WATCHDOG_RESET ();
+ puts ("IDE: ");
+ ide_init ();
+#endif /* CFG_CMD_IDE */
+
#ifdef CONFIG_LAST_STAGE_INIT
WATCHDOG_RESET ();
/*
