Fix low-level OHCI transfers for ARM920t and MPC5xxx
A new, Windows compatible init sequence was also backported from Linux 2.6,
but disabled with #undef NEW_INIT_SEQ as it wouldn't change the behaviour
of the memopry sticks we tested. Maybe it's not relevant for mass storage
devices. For recerence, see file common/usb.c, function usb_new_device(),
section #ifdef NEW_INIT_SEQ.
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index 4747592..3af8619 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -448,11 +448,17 @@
block_dev_desc_t *stor_dev;
#endif
- if ((strncmp(argv[1],"reset",5) == 0) ||
- (strncmp(argv[1],"start",5) == 0)){
+ if ((strncmp(argv[1], "reset", 5) == 0) ||
+ (strncmp(argv[1], "start", 5) == 0)){
usb_stop();
printf("(Re)start USB...\n");
- usb_init();
+ i = usb_init();
+#ifdef CONFIG_USB_STORAGE
+ /* try to recognize storage devices immediately */
+ if (i >= 0)
+ usb_stor_curr_dev = usb_stor_scan(1);
+
+#endif
return 0;
}
if (strncmp(argv[1],"stop",4) == 0) {
@@ -513,15 +519,18 @@
return 0;
}
#ifdef CONFIG_USB_STORAGE
- if (strncmp(argv[1],"scan",4) == 0) {
- printf("Scan for storage device:\n");
- usb_stor_curr_dev=usb_stor_scan(1);
- if (usb_stor_curr_dev==-1) {
- printf("No device found. Not initialized?\n");
- return 1;
- }
+ if (strncmp(argv[1], "scan", 4) == 0) {
+ printf(" NOTE: this command is obsolete and will be phased out\n");
+ printf(" please use 'usb storage' for USB storage devices information\n\n");
+ usb_stor_info();
return 0;
}
+
+ if (strncmp(argv[1], "stor", 4) == 0) {
+ usb_stor_info();
+ return 0;
+ }
+
if (strncmp(argv[1],"part",4) == 0) {
int devno, ok;
for (ok=0, devno=0; devno<USB_MAX_STOR_DEV; ++devno) {
@@ -560,8 +569,8 @@
return 1;
}
}
- if (strcmp(argv[1],"dev") == 0) {
- if (argc==3) {
+ if (strncmp(argv[1], "dev", 3) == 0) {
+ if (argc == 3) {
int dev = (int)simple_strtoul(argv[2], NULL, 10);
printf ("\nUSB device %d: ", dev);
if (dev >= USB_MAX_STOR_DEV) {
@@ -608,7 +617,7 @@
"usb stop [f] - stop USB [f]=force stop\n"
"usb tree - show USB device tree\n"
"usb info [dev] - show available USB devices\n"
- "usb scan - (re-)scan USB bus for storage devices\n"
+ "usb storage - show details of USB storage devices\n"
"usb dev [dev] - show or set current USB storage device\n"
"usb part [dev] - print partition table of one or all USB storage devices\n"
"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
