* Patch by Gleb Natapov, 19 Sep 2003:
Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
* Patch by Anders Larsen, 17 Sep 2003:
Bring ARM memory layout in sync with the documentation:
stack and malloc-heap are now located _below_ the U-Boot code
diff --git a/include/asm-arm/u-boot-arm.h b/include/asm-arm/u-boot-arm.h
index 355b1e4..4c92b1f 100644
--- a/include/asm-arm/u-boot-arm.h
+++ b/include/asm-arm/u-boot-arm.h
@@ -35,7 +35,6 @@
extern ulong _armboot_end; /* BSS end */
extern ulong IRQ_STACK_START; /* top of IRQ stack */
extern ulong FIQ_STACK_START; /* top of FIQ stack */
-extern ulong _armboot_real_end; /* first usable RAM address */
/* cpu/.../cpu.c */
int cpu_init(void);
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 9f868f8..8a09da6 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -97,6 +97,7 @@
* Size of malloc() pool
*/
#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_MONITOR_LEN (256 * 1024)
#define CFG_MALLOC_LEN (128 * 1024)
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 415b7fb..b092ec7 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -25,6 +25,12 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
/* ARM asynchronous clock */
#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
@@ -40,7 +46,10 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
#define CONFIG_BAUDRATE 115200
+
/*
* Hardware drivers
*/
diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h
index 22d154e..d730527 100644
--- a/include/configs/cogent_mpc8260.h
+++ b/include/configs/cogent_mpc8260.h
@@ -160,6 +160,7 @@
#define CFG_CMA_CONS_SERIAL /* use Cogent motherboard serial for console */
#endif
#define CFG_CMA_LCD_HEARTBEAT /* define for sec rotator in lcd corner */
+#define CONFIG_SHOW_ACTIVITY
#if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
/*
diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h
index 2fd4037..51d4a7a 100644
--- a/include/configs/cogent_mpc8xx.h
+++ b/include/configs/cogent_mpc8xx.h
@@ -126,6 +126,7 @@
#define CFG_CMA_CONS_SERIAL /* use Cogent motherboard serial for console */
#define CONFIG_CONS_INDEX 1
#define CFG_CMA_LCD_HEARTBEAT /* define for sec rotator in lcd corner */
+#define CONFIG_SHOW_ACTIVITY
#if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
/*
* flash exists on the motherboard
diff --git a/include/configs/cradle.h b/include/configs/cradle.h
index 13996d4..2cec4c7 100644
--- a/include/configs/cradle.h
+++ b/include/configs/cradle.h
@@ -47,6 +47,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index 879607c..1b39d23 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -94,6 +94,7 @@
*
*/
#define CFG_MALLOC_LEN (128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "uboot> " /* Monitor Command Prompt */
diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h
index 8594e65..f3a871b 100644
--- a/include/configs/dnp1110.h
+++ b/include/configs/dnp1110.h
@@ -47,6 +47,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h
index 9a4c7e6..d9dd620 100644
--- a/include/configs/ep7312.h
+++ b/include/configs/ep7312.h
@@ -48,6 +48,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
diff --git a/include/configs/impa7.h b/include/configs/impa7.h
index fb35bd4..b4c1edf 100644
--- a/include/configs/impa7.h
+++ b/include/configs/impa7.h
@@ -48,6 +48,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index cfe9032..709c0d7 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -87,6 +87,7 @@
*
*/
#define CFG_MALLOC_LEN (256*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "uboot> " /* Monitor Command Prompt */
diff --git a/include/configs/lart.h b/include/configs/lart.h
index 32153fc..c98f377 100644
--- a/include/configs/lart.h
+++ b/include/configs/lart.h
@@ -46,6 +46,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 609ce33..bfced44 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -52,6 +52,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 7451192..04215a6 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -113,6 +113,7 @@
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
#define CONFIG_WATCHDOG 1 /* watchdog enabled */
+#define CFG_WATCHDOG_FREQ (CFG_HZ / 20)
#undef CONFIG_STATUS_LED /* Status LED disabled */
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 66a8b6b..845e4d2 100644
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -27,6 +27,12 @@
#define __CONFIG_H
/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
+/*
* High Level Configuration Options
* (easy to change)
*/
@@ -49,6 +55,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
index d65e2a0..9bdd795 100644
--- a/include/configs/omap1610inn.h
+++ b/include/configs/omap1610inn.h
@@ -27,6 +27,12 @@
#define __CONFIG_H
/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
+/*
* High Level Configuration Options
* (easy to change)
*/
@@ -50,6 +56,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
@@ -66,14 +73,13 @@
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE (-4)
-#define CFG_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */
-#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart
- on helen */
+#define CFG_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */
+#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */
/*
* select serial console configuration
*/
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP1610 Innovator */
+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP1610 Innovator */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/shannon.h b/include/configs/shannon.h
index 77af2f3..7afe62d 100644
--- a/include/configs/shannon.h
+++ b/include/configs/shannon.h
@@ -52,6 +52,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
index a557bc6..a7621a2 100644
--- a/include/configs/smdk2400.h
+++ b/include/configs/smdk2400.h
@@ -55,6 +55,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index 0dcbbb0..7e3a02d 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -54,6 +54,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 4d37807..95ee37e 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -89,6 +89,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h
index ecb7215..a8a8ee5 100644
--- a/include/configs/wepep250.h
+++ b/include/configs/wepep250.h
@@ -23,6 +23,12 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
#define CONFIG_PXA250 1 /* this is an PXA250 CPU */
#define CONFIG_WEPEP250 1 /* config for wepep250 board */
#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
@@ -93,6 +99,7 @@
* Malloc pool need to host env + 128 Kb reserve for other allocations.
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + (128<<10) )
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CONFIG_STACKSIZE (120<<10) /* stack size */
