fsl-ddr: add the DDR3 SPD infrastructure
- support mirrored DIMMs, not support register DIMMs
- test passed on P2020DS board with MT9JSF12872AY-1G1D1
- test passed on MPC8569MDS board with MT8JSF12864HY-1G1D1
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
diff --git a/include/asm-ppc/fsl_ddr_dimm_params.h b/include/asm-ppc/fsl_ddr_dimm_params.h
index c794eed..55923e0 100644
--- a/include/asm-ppc/fsl_ddr_dimm_params.h
+++ b/include/asm-ppc/fsl_ddr_dimm_params.h
@@ -33,9 +33,15 @@
/* used in computing base address of DIMMs */
unsigned long long base_address;
+ /* mirrored DIMMs */
+ unsigned int mirrored_dimm; /* only for ddr3 */
/* DIMM timing parameters */
+ unsigned int mtb_ps; /* medium timebase ps, only for ddr3 */
+ unsigned int tAA_ps; /* minimum CAS latency time, only for ddr3 */
+ unsigned int tFAW_ps; /* four active window delay, only for ddr3 */
+
/*
* SDRAM clock periods
* The range for these are 1000-10000 so a short should be sufficient
@@ -67,6 +73,7 @@
unsigned int refresh_rate_ps;
+ /* DDR3 doesn't need these as below */
unsigned int tIS_ps; /* byte 32, spd->ca_setup */
unsigned int tIH_ps; /* byte 33, spd->ca_hold */
unsigned int tDS_ps; /* byte 34, spd->data_setup */
