Initial revision
diff --git a/include/altera.h b/include/altera.h
new file mode 100644
index 0000000..88f72db
--- /dev/null
+++ b/include/altera.h
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <fpga.h>
+
+#ifndef _ALTERA_H_
+#define _ALTERA_H_
+
+/*
+ * Note that this is just Altera FPGA interface boilerplate.
+ * There is no support for Altera devices yet.
+ *
+ * See include/xilinx.h for a working example.
+ */
+
+/* In your board's config.h file you should define CONFIG_FPGA as such:
+ * #define CONFIG_FPGA (CFG_ALTERA_xxx | CFG_ALTERA_IF_xxx )
+ */
+
+/* Altera Model definitions */
+#define CFG_ALTERA_xxxx ( CFG_FPGA_ALTERA | CFG_FPGA_DEV( 0x1 ))
+/* Add new models here */
+
+/* Altera Interface definitions */
+#define CFG_ALTERA_IF_xxx CFG_FPGA_IF( 0x1 )
+/* Add new interfaces here */
+
+typedef enum { /* typedef Altera_iface */
+ min_altera_iface_type, /* insert all new types after this */
+/* Add new interfaces here */
+ max_altera_iface_type /* insert all new types before this */
+} Altera_iface; /* end, typedef Altera_iface */
+
+typedef enum { /* typedef Altera_Family */
+ min_altera_type, /* insert all new types after this */
+/* Add new models here */
+ max_altera_type /* insert all new types before this */
+} Altera_Family; /* end, typedef Altera_Family */
+
+typedef struct { /* typedef Altera_desc */
+ Altera_Family family; /* part type */
+ Altera_iface iface; /* interface type */
+ size_t size; /* bytes of data part can accept */
+ void * base; /* base interface address */
+} Altera_desc; /* end, typedef Altera_desc */
+
+extern int altera_load( Altera_desc *desc, void *image, size_t size );
+extern int altera_dump( Altera_desc *desc, void *buf, size_t bsize );
+extern int altera_info( Altera_desc *desc );
+extern int altera_reloc( Altera_desc *desc, ulong reloc_off );
+
+#endif /* _ALTERA_H_ */
diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h
new file mode 100644
index 0000000..4733858
--- /dev/null
+++ b/include/asm-arm/bitops.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright 1995, Russell King.
+ * Various bits and pieces copyrights include:
+ * Linus Torvalds (test_bit).
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ *
+ * Please note that the code in this file should never be included
+ * from user space. Many of these are not implemented in assembler
+ * since they would be too costly. Also, they require priviledged
+ * instructions (which are not available from user mode) to ensure
+ * that they are atomic.
+ */
+
+#ifndef __ASM_ARM_BITOPS_H
+#define __ASM_ARM_BITOPS_H
+
+#ifdef __KERNEL__
+
+#define smp_mb__before_clear_bit() do { } while (0)
+#define smp_mb__after_clear_bit() do { } while (0)
+
+/*
+ * Function prototypes to keep gcc -Wall happy.
+ */
+extern void set_bit(int nr, volatile void * addr);
+
+static inline void __set_bit(int nr, volatile void *addr)
+{
+ ((unsigned char *) addr)[nr >> 3] |= (1U << (nr & 7));
+}
+
+extern void clear_bit(int nr, volatile void * addr);
+
+static inline void __clear_bit(int nr, volatile void *addr)
+{
+ ((unsigned char *) addr)[nr >> 3] &= ~(1U << (nr & 7));
+}
+
+extern void change_bit(int nr, volatile void * addr);
+
+static inline void __change_bit(int nr, volatile void *addr)
+{
+ ((unsigned char *) addr)[nr >> 3] ^= (1U << (nr & 7));
+}
+
+extern int test_and_set_bit(int nr, volatile void * addr);
+
+static inline int __test_and_set_bit(int nr, volatile void *addr)
+{
+ unsigned int mask = 1 << (nr & 7);
+ unsigned int oldval;
+
+ oldval = ((unsigned char *) addr)[nr >> 3];
+ ((unsigned char *) addr)[nr >> 3] = oldval | mask;
+ return oldval & mask;
+}
+
+extern int test_and_clear_bit(int nr, volatile void * addr);
+
+static inline int __test_and_clear_bit(int nr, volatile void *addr)
+{
+ unsigned int mask = 1 << (nr & 7);
+ unsigned int oldval;
+
+ oldval = ((unsigned char *) addr)[nr >> 3];
+ ((unsigned char *) addr)[nr >> 3] = oldval & ~mask;
+ return oldval & mask;
+}
+
+extern int test_and_change_bit(int nr, volatile void * addr);
+
+static inline int __test_and_change_bit(int nr, volatile void *addr)
+{
+ unsigned int mask = 1 << (nr & 7);
+ unsigned int oldval;
+
+ oldval = ((unsigned char *) addr)[nr >> 3];
+ ((unsigned char *) addr)[nr >> 3] = oldval ^ mask;
+ return oldval & mask;
+}
+
+extern int find_first_zero_bit(void * addr, unsigned size);
+extern int find_next_zero_bit(void * addr, int size, int offset);
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static inline int test_bit(int nr, const void * addr)
+{
+ return ((unsigned char *) addr)[nr >> 3] & (1U << (nr & 7));
+}
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+ int k;
+
+ word = ~word;
+ k = 31;
+ if (word & 0x0000ffff) { k -= 16; word <<= 16; }
+ if (word & 0x00ff0000) { k -= 8; word <<= 8; }
+ if (word & 0x0f000000) { k -= 4; word <<= 4; }
+ if (word & 0x30000000) { k -= 2; word <<= 2; }
+ if (word & 0x40000000) { k -= 1; }
+ return k;
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+#define ffs(x) generic_ffs(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#define ext2_set_bit test_and_set_bit
+#define ext2_clear_bit test_and_clear_bit
+#define ext2_test_bit test_bit
+#define ext2_find_first_zero_bit find_first_zero_bit
+#define ext2_find_next_zero_bit find_next_zero_bit
+
+/* Bitmap functions for the minix filesystem. */
+#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ARM_BITOPS_H */
diff --git a/include/asm-arm/proc-armv/ptrace.h b/include/asm-arm/proc-armv/ptrace.h
new file mode 100644
index 0000000..51708b9
--- /dev/null
+++ b/include/asm-arm/proc-armv/ptrace.h
@@ -0,0 +1,110 @@
+/*
+ * linux/include/asm-arm/proc-armv/ptrace.h
+ *
+ * Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROC_PTRACE_H
+#define __ASM_PROC_PTRACE_H
+
+#include <linux/config.h>
+
+#define USR26_MODE 0x00
+#define FIQ26_MODE 0x01
+#define IRQ26_MODE 0x02
+#define SVC26_MODE 0x03
+#define USR_MODE 0x10
+#define FIQ_MODE 0x11
+#define IRQ_MODE 0x12
+#define SVC_MODE 0x13
+#define ABT_MODE 0x17
+#define UND_MODE 0x1b
+#define SYSTEM_MODE 0x1f
+#define MODE_MASK 0x1f
+#define T_BIT 0x20
+#define F_BIT 0x40
+#define I_BIT 0x80
+#define CC_V_BIT (1 << 28)
+#define CC_C_BIT (1 << 29)
+#define CC_Z_BIT (1 << 30)
+#define CC_N_BIT (1 << 31)
+#define PCMASK 0
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+ stack during a system call. */
+
+struct pt_regs {
+ long uregs[18];
+};
+
+#define ARM_cpsr uregs[16]
+#define ARM_pc uregs[15]
+#define ARM_lr uregs[14]
+#define ARM_sp uregs[13]
+#define ARM_ip uregs[12]
+#define ARM_fp uregs[11]
+#define ARM_r10 uregs[10]
+#define ARM_r9 uregs[9]
+#define ARM_r8 uregs[8]
+#define ARM_r7 uregs[7]
+#define ARM_r6 uregs[6]
+#define ARM_r5 uregs[5]
+#define ARM_r4 uregs[4]
+#define ARM_r3 uregs[3]
+#define ARM_r2 uregs[2]
+#define ARM_r1 uregs[1]
+#define ARM_r0 uregs[0]
+#define ARM_ORIG_r0 uregs[17]
+
+#ifdef __KERNEL__
+
+#define user_mode(regs) \
+ (((regs)->ARM_cpsr & 0xf) == 0)
+
+#ifdef CONFIG_ARM_THUMB
+#define thumb_mode(regs) \
+ (((regs)->ARM_cpsr & T_BIT))
+#else
+#define thumb_mode(regs) (0)
+#endif
+
+#define processor_mode(regs) \
+ ((regs)->ARM_cpsr & MODE_MASK)
+
+#define interrupts_enabled(regs) \
+ (!((regs)->ARM_cpsr & I_BIT))
+
+#define fast_interrupts_enabled(regs) \
+ (!((regs)->ARM_cpsr & F_BIT))
+
+#define condition_codes(regs) \
+ ((regs)->ARM_cpsr & (CC_V_BIT|CC_C_BIT|CC_Z_BIT|CC_N_BIT))
+
+/* Are the current registers suitable for user mode?
+ * (used to maintain security in signal handlers)
+ */
+static inline int valid_user_regs(struct pt_regs *regs)
+{
+ if ((regs->ARM_cpsr & 0xf) == 0 &&
+ (regs->ARM_cpsr & (F_BIT|I_BIT)) == 0)
+ return 1;
+
+ /*
+ * Force CPSR to something logical...
+ */
+ regs->ARM_cpsr &= (CC_V_BIT|CC_C_BIT|CC_Z_BIT|CC_N_BIT|0x10);
+
+ return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif
+
diff --git a/include/asm-arm/u-boot-arm.h b/include/asm-arm/u-boot-arm.h
new file mode 100644
index 0000000..355b1e4
--- /dev/null
+++ b/include/asm-arm/u-boot-arm.h
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _U_BOOT_ARM_H_
+#define _U_BOOT_ARM_H_ 1
+
+/* for the following variables, see start.S */
+extern ulong _armboot_start; /* code start */
+extern ulong _armboot_end_data; /* code + data end */
+extern ulong _armboot_end; /* BSS end */
+extern ulong IRQ_STACK_START; /* top of IRQ stack */
+extern ulong FIQ_STACK_START; /* top of FIQ stack */
+extern ulong _armboot_real_end; /* first usable RAM address */
+
+/* cpu/.../cpu.c */
+int cpu_init(void);
+int cleanup_before_linux(void);
+
+/* board/.../... */
+int board_init(void);
+int dram_init (void);
+
+/* ------------------------------------------------------------ */
+/* Here is a list of some prototypes which are incompatible to */
+/* the U-Boot implementation */
+/* To be fixed! */
+/* ------------------------------------------------------------ */
+/* common/cmd_nvedit.c */
+void setenv (char *, char *);
+
+/* cpu/.../interrupt.c */
+void reset_timer_masked (void);
+ulong get_timer_masked (void);
+void udelay_masked (unsigned long usec);
+
+#endif /* _U_BOOT_ARM_H_ */
diff --git a/include/asm-arm/u-boot.h b/include/asm-arm/u-boot.h
new file mode 100644
index 0000000..c3b0e4a
--- /dev/null
+++ b/include/asm-arm/u-boot.h
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _U_BOOT_H_
+#define _U_BOOT_H_ 1
+
+typedef struct bd_info {
+ int bi_baudrate; /* serial console baudrate */
+ unsigned long bi_ip_addr; /* IP Address */
+ unsigned char bi_enetaddr[6]; /* Ethernet adress */
+ struct environment_s *bi_env;
+ ulong bi_arch_number; /* unique id for this board */
+ ulong bi_boot_params; /* where this board expects params */
+ struct /* RAM configuration */
+ {
+ ulong start;
+ ulong size;
+ } bi_dram[CONFIG_NR_DRAM_BANKS];
+} bd_t;
+
+#define bi_env_data bi_env->data
+#define bi_env_crc bi_env->crc
+
+#endif /* _U_BOOT_H_ */
diff --git a/include/cmd_bsp.h b/include/cmd_bsp.h
new file mode 100644
index 0000000..b39d50b
--- /dev/null
+++ b/include/cmd_bsp.h
@@ -0,0 +1,313 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CMD_BSP_H_
+#define _CMD_BSP_H_
+
+#include <common.h>
+#include <command.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+
+/* ----- LWMON -----------------------------------------------------------------
+ */
+#if defined(CONFIG_LWMON)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "pic", 3, 4, 1, do_pic, \
+ "pic - read and write PIC registers\n", \
+ "read reg - read PIC register `reg'\n" \
+ "pic write reg val - write value `val' to PIC register `reg'\n" \
+), MK_CMD_TBL_ENTRY( \
+ "kbd", 3, 1, 1, do_kbd, \
+ "kbd - read keyboard status\n", \
+ NULL \
+), MK_CMD_TBL_ENTRY( \
+ "lsb", 3, 2, 1, do_lsb, \
+ "lsb - check and set LSB switch\n", \
+ "on - switch LSB on\n" \
+ "lsb off - switch LSB off\n" \
+ "lsb - print current setting\n" \
+),
+int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_LWMON */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- PCU E -----------------------------------------------------------------
+ */
+#if defined(CONFIG_PCU_E)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "puma", 4, 4, 1, do_puma, \
+ "puma - access PUMA FPGA\n", \
+ "status - print PUMA status\n" \
+ "puma load addr len - load PUMA configuration data\n" \
+),
+int do_puma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_PCU_E */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- CCM/SCM ---------------------------------------------------------------
+ */
+#if defined(CONFIG_CCM) || defined(CONFIG_SCM)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "fpga", 4, 4, 1, do_fpga, \
+ "fpga - access FPGA(s)\n", \
+ "fpga status [name] - print FPGA status\n" \
+ "fpga reset [name] - reset FPGA\n" \
+ "fpga load [name] addr - load FPGA configuration data\n" \
+),
+int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_CCM, CONFIG_SCM */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- PIP405 -----------------------------------------------------------------
+ */
+#if defined(CONFIG_PIP405)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "pip405", 4, 6, 1, do_pip405, \
+ "pip405 - PIP405 specific Cmds\n", \
+ "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \
+ "pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n" \
+ "pip405 flash mps - updates U-Boot with image from MPS\n" \
+),
+int do_pip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_PIP405 */
+/* ----------------------------------------------------------------------------*/
+/* ----- MIP405 -----------------------------------------------------------------
+ */
+#if defined(CONFIG_MIP405)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "mip405", 4, 6, 1, do_mip405, \
+ "mip405 - MIP405 specific Cmds\n", \
+ "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \
+ "mip405 flash mps - updates U-Boot with image from MPS\n" \
+),
+int do_mip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_MIP405 */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- DASA_SIM ---------------------------------------------------------------
+ */
+#if defined(CONFIG_DASA_SIM)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "pci9054", 7, 3, 1, do_pci9054, \
+ "pci9054 - PLX PCI9054 EEPROM access\n", \
+ "pci9054 info - print EEPROM values\n" \
+ "pci9054 update - updates EEPROM with default values\n" \
+),
+int do_pci9054 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_DASA_SIM */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- HYMOD -----------------------------------------------------------------
+ */
+#if defined(CONFIG_HYMOD)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "fpga", 4, 6, 1, do_fpga, \
+ "fpga - FPGA sub-system\n", \
+ "load [type] addr size\n" \
+ " - write the configuration data at memory address `addr',\n" \
+ " size `size' bytes, into the FPGA of type `type' (either\n" \
+ " `main' or `mezz', default `main'). e.g.\n" \
+ " `fpga load 100000 7d8f'\n" \
+ " loads the main FPGA with config data at address 100000\n" \
+ " HEX, size 7d8f HEX (32143 DEC) bytes\n" \
+ "fpga tftp file addr\n" \
+ " - transfers `file' from the tftp server into memory at\n" \
+ " address `addr', then writes the entire file contents\n" \
+ " into the main FPGA\n" \
+ "fpga store addr\n" \
+ " - read configuration data from the main FPGA (the mezz\n" \
+ " FPGA is write-only), into address `addr'. There must be\n" \
+ " enough memory available at `addr' to hold all the config\n"\
+ " data - the size of which is determined by VC:???\n" \
+ "fpga info\n" \
+ " - print information about the Hymod FPGA, namely the\n" \
+ " memory addresses at which the four FPGA local bus\n" \
+ " address spaces appear in the physical address space\n" \
+), MK_CMD_TBL_ENTRY( \
+ "eeclear", 4, 1, 0, do_eecl, \
+ "eeclear - Clear the eeprom on a Hymod board \n", \
+ "[type]\n" \
+ " - write zeroes into the EEPROM on the board of type `type'\n"\
+ " (`type' is either `main' or `mezz' - default `main')\n" \
+ " Note: the EEPROM write enable jumper must be installed\n" \
+),
+int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_eecl (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_HYMOD */
+/* ----------------------------------------------------------------------------*/
+/* CRAY405 (L1) */
+#if defined (CONFIG_CRAYL1)
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "L1cmd", 5, 4, 1, do_crayL1, \
+ "L1cmd - L1 update, setup, commands \n", \
+ "L1cmd update - update flash images from host\n" \
+ "L1cmd boot - nfs or ramboot L1\n" \
+),
+int do_crayL1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+#endif /* CONFIG_CRAY405 */
+/* ----------------------------------------------------------------------------*/
+
+#if defined (CONFIG_EVB64260)
+/* ----- EVB64260 -------------------------------------------------------------*/
+#ifdef CONFIG_ZUMA_V2
+#define CMD_TBL_BSP ZUMA_TBL_ENTRY
+
+#define ZUMA_TBL_ENTRY MK_CMD_TBL_ENTRY( \
+ "zinit", 5, 1, 0, do_zuma_init_pbb, \
+ "zinit - init zuma pbb\n", \
+ "\n" \
+ " - init zuma pbb\n" \
+), MK_CMD_TBL_ENTRY( \
+ "zdtest", 6, 3, 1, do_zuma_test_dma, \
+ "zdtest - run dma test\n", \
+ "[cmd [count]]\n" \
+ " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" \
+), MK_CMD_TBL_ENTRY( \
+ "zminit", 5, 1, 0, do_zuma_init_mbox, \
+ "zminit - init zuma mbox\n", \
+ "\n" \
+ " - init zuma mbox\n" \
+),
+
+int do_zuma_init_pbb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_zuma_test_dma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+void zuma_init_pbb(void);
+int zuma_mbox_init(void);
+int zuma_test_dma(int cmd, int size);
+#else
+#define CMD_TBL_BSP
+#endif /* ZUMA_NTL */
+
+#endif /* CONFIG_EVB64260 */
+/* ----------------------------------------------------------------------------*/
+
+/* -----W7O--------------------------------------------------------------------*/
+#if defined(CONFIG_W7O)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "vpd", 3, 2, 1, do_vpd, \
+ "vpd - Read Vital Product Data\n", \
+ "[dev_addr]\n" \
+ " - Read VPD Data from default address, or device address 'dev_addr'.\n" \
+),
+
+extern int do_vpd (cmd_tbl_t *, int, int, char *[]);
+
+#endif /* CONFIG_W7O */
+/* ----------------------------------------------------------------------------*/
+
+/* ---- PCIPPC2 / PCIPPC6 -----------------------------------------------------*/
+#if defined(CONFIG_PCIPPC2) || defined(CONFIG_PCIPPC6)
+#if defined(CONFIG_WATCHDOG)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "wd", 3, 2, 1, do_wd, \
+ "wd - check and set watchdog\n", \
+ "on - switch watchDog on\n" \
+ "wd off - switch watchdog off\n" \
+ "wd - print current status\n" \
+),
+
+extern int do_wd (cmd_tbl_t *, int, int, char *[]);
+
+#else
+#define CMD_TBL_BSP
+#endif /* CONFIG_WATCHDOG */
+
+#endif /* CONFIG_PCIPPC2 , CONFIG_PCIPPC6 */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- PN62 -----------------------------------------------------------------*/
+#if defined(CONFIG_PN62)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "loadpci", 5, 2, 1, do_loadpci, \
+ "loadpci - load binary file over PCI\n", \
+ "[addr]\n" \
+ " - load binary file over PCI to address 'addr'\n" \
+), MK_CMD_TBL_ENTRY( \
+ "led" , 3, 3, 1, do_led, \
+ "led - set LED 0..11 on the PN62 board\n", \
+ "i fun\n" \
+ " - set 'i'th LED to function 'fun'\n" \
+),
+
+extern int do_loadpci (cmd_tbl_t *, int, int, char *[]);
+extern int do_led (cmd_tbl_t *, int, int, char *[]);
+#endif /* CONFIG_PN62 */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- TRAB ------------------------------------------------------------------
+ */
+#if defined(CONFIG_TRAB)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "kbd", 3, 1, 1, do_kbd, \
+ "kbd - read keyboard status\n", \
+ NULL \
+),
+
+int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_TRAB */
+/* ----------------------------------------------------------------------------*/
+
+#else
+#define CMD_TBL_BSP
+#endif /* CFG_CMD_BSP */
+
+/* ----- R360MPI ---------------------------------------------------------------
+ */
+#if defined(CONFIG_R360MPI)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "kbd", 3, 1, 1, do_kbd, \
+ "kbd - read keyboard status\n", \
+ NULL \
+),
+
+int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_R360MPI */
+/* ----------------------------------------------------------------------------*/
+
+#endif /* _CMD_BSP_H_ */
diff --git a/include/configs/BMW.h b/include/configs/BMW.h
new file mode 100644
index 0000000..edfd68f
--- /dev/null
+++ b/include/configs/BMW.h
@@ -0,0 +1,303 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ *
+ * Configuration settings for the CU824 board.
+ *
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X 1
+#define CONFIG_MPC8245 1
+#define CONFIG_BMW 1
+
+#define CONFIG_BCM570x 1 /* Use Broadcom BCM570x Ethernet Driver */
+#define CONFIG_TIGON3 1
+
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 9600
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
+
+#define CONFIG_BOOTCOMMAND "bootm FF820000" /* autoboot command */
+#define CONFIG_BOOTDELAY 5
+
+#define CFG_MAX_DOC_DEVICE 1 /* Only use Onboard TSOP-16MB device */
+#define DOC_PASSIVE_PROBE 1
+#define CFG_DOC_SUPPORT_2000 1
+#define CFG_DOC_SUPPORT_MILLENNIUM 1
+#define CFG_DOC_SHORT_TIMEOUT 1
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DOC | \
+ CFG_CMD_ELF | \
+ 0 )
+#if 0
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | \
+ CFG_CMD_PCI | CFG_CMD_DOC | CFG_CMD_DATE)
+
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
+#endif
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+ */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=>" /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+
+/* Print Buffer Size
+ */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+
+#define CFG_MAXARGS 8 /* Max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+
+#define CFG_FLASH_BASE0_PRELIM 0xFFF00000 /* FLASH bank on RCS#0 */
+#define CFG_FLASH_BASE1_PRELIM 0xFF800000 /* FLASH bank on RCS#1 */
+#define CFG_FLASH_BASE CFG_MONITOR_BASE
+#define CFG_FLASH_BANKS { CFG_FLASH_BASE0_PRELIM , CFG_FLASH_BASE1_PRELIM }
+
+/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
+ * reset vector is actually located at FFB00100, but the 8245
+ * takes care of us.
+ */
+#define CFG_RESET_ADDRESS 0xFFF00100
+
+#define CFG_EUMB_ADDR 0xFC000000
+
+#define CFG_MONITOR_BASE TEXT_BASE
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (2048 << 10) /* Reserve 2MB for malloc() */
+
+#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
+#define CFG_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
+
+ /* Maximum amount of RAM.
+ */
+#define CFG_MAX_RAM_SIZE 0x04000000 /* 0 .. 64 MB of (S)DRAM */
+
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#undef CFG_RAMBOOT
+#else
+#define CFG_RAMBOOT
+#endif
+
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+#define CFG_INIT_RAM_ADDR CFG_SDRAM_BASE + CFG_MONITOR_LEN
+#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ * For the detail description refer to the MPC8240 user's manual.
+ */
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+#define CFG_HZ 1000
+
+#define CFG_ETH_DEV_FN 0x7800
+#define CFG_ETH_IOBASE 0x00104000
+
+ /* Bit-field values for MCCR1.
+ */
+#define CFG_ROMNAL 0xf
+#define CFG_ROMFAL 0x1f
+#define CFG_DBUS_SIZE 0x3
+
+ /* Bit-field values for MCCR2.
+ */
+#define CFG_TSWAIT 0x5 /* Transaction Start Wait States timer */
+#define CFG_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */
+
+ /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
+ */
+#define CFG_BSTOPRE 0 /* FIXME: was 192 */
+
+ /* Bit-field values for MCCR3.
+ */
+#define CFG_REFREC 2 /* Refresh to activate interval */
+
+ /* Bit-field values for MCCR4.
+ */
+#define CFG_PRETOACT 2 /* Precharge to activate interval FIXME: was 2 */
+#define CFG_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */
+#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
+#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
+#define CFG_SDMODE_BURSTLEN 3 /* SDMODE Burst length */
+#define CFG_ACTORW 0xa /* FIXME was 2 */
+#define CFG_REGISTERD_TYPE_BUFFER 1
+
+#define CFG_PGMAX 0x0 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
+
+#define CFG_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
+
+/* Memory bank settings.
+ * Only bits 20-29 are actually used from these vales to set the
+ * start/end addresses. The upper two bits will always be 0, and the lower
+ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
+ * address. Refer to the MPC8240 book.
+ */
+
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START 0x3ff00000
+#define CFG_BANK1_END 0x3fffffff
+#define CFG_BANK1_ENABLE 0
+#define CFG_BANK2_START 0x3ff00000
+#define CFG_BANK2_END 0x3fffffff
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x3ff00000
+#define CFG_BANK3_END 0x3fffffff
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x3ff00000
+#define CFG_BANK4_END 0x3fffffff
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x3ff00000
+#define CFG_BANK5_END 0x3fffffff
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x3ff00000
+#define CFG_BANK6_END 0x3fffffff
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x3ff00000
+#define CFG_BANK7_END 0x3fffffff
+#define CFG_BANK7_ENABLE 0
+
+#define CFG_ODCR 0xff
+
+#define CONFIG_PCI 1 /* Include PCI support */
+#undef CONFIG_PCI_PNP
+
+/* PCI Memory space(s) */
+#define PCI_MEM_SPACE1_START 0x80000000
+#define PCI_MEM_SPACE2_START 0xfd000000
+
+/* ROM Spaces */
+#include "../board/bmw/bmw.h"
+
+/* BAT configuration */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT1L (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 0 /* Max number of flash banks */
+#define CFG_MAX_FLASH_SECT 64 /* Max number of sectors per flash */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/*
+ * Warining: environment is not EMBEDDED in the U-Boot code.
+ * It's stored in flash separately.
+ */
+#define CFG_ENV_IS_IN_NVRAM 1
+#define CONFIG_ENV_OVERWRITE 1
+#define CFG_NVRAM_ACCESS_ROUTINE 1
+#define CFG_ENV_ADDR 0x7c004000 /* right at the start of NVRAM */
+#define CFG_ENV_SIZE 0x1ff0 /* Size of the Environment - 8K */
+#define CFG_ENV_OFFSET 0 /* starting right at the beginning */
+
+/*
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/CCM.h b/include/configs/CCM.h
new file mode 100644
index 0000000..0e0248d
--- /dev/null
+++ b/include/configs/CCM.h
@@ -0,0 +1,472 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * configuration options, board specific, for Siemens Card Controller Module
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef CCM_80MHz /* define for 80 MHz CPU only */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC860 1 /* This is a MPC860 CPU ... */
+#define CONFIG_CCM 1 /* on a Card Controller Module */
+
+#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
+#undef CONFIG_8xx_CONS_SMC2
+#undef CONFIG_8xx_CONS_NONE
+
+/* ENVIRONMENT */
+
+#define CONFIG_BAUDRATE 19200 /* console baudrate in bps */
+#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
+#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
+
+#define CONFIG_IPADDR 192.168.0.42
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_GATEWAYIP 0.0.0.0
+#define CONFIG_SERVERIP 192.168.0.254
+
+#define CONFIG_HOSTNAME CCM
+
+#define CONFIG_LOADADDR 40180000
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_BOOTCOMMAND "setenv bootargs " \
+ "mem=$(mem) " \
+ "root=/dev/ram rw ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off " \
+ "wt_8xx=timeout:3600; " \
+ "bootm"
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
+
+#define CONFIG_WATCHDOG 1 /* watchdog enabled */
+
+#undef CONFIG_STATUS_LED /* Status LED disabled */
+
+#define CONFIG_PRAM 512 /* reserve 512kB "protected RAM"*/
+
+#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
+
+#define CONFIG_SPI /* enable SPI driver */
+#define CONFIG_SPI_X /* 16 bit EEPROM addressing */
+
+/* ----------------------------------------------------------------
+ * Offset to initial SPI buffers in DPRAM (used if the environment
+ * is in the SPI EEPROM): We need a 520 byte scratch DPRAM area to
+ * use at an early stage. It is used between the two initialization
+ * calls (spi_init_f() and spi_init_r()). The value 0xB00 makes it
+ * far enough from the start of the data area (as well as from the
+ * stack pointer).
+ * ---------------------------------------------------------------- */
+#define CFG_SPI_INIT_OFFSET 0xB00
+
+#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 32-byte page size */
+
+
+#define CONFIG_MAC_PARTITION /* nod used yet */
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DATE | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_BSP )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x00100000 /* default load address */
+
+/* Ethernet hardware configuration done using port pins */
+#define CFG_PA_ETH_RESET 0x0200 /* PA 6 */
+#define CFG_PA_ETH_MDDIS 0x4000 /* PA 1 */
+#define CFG_PB_ETH_POWERDOWN 0x00000800 /* PB 20 */
+#define CFG_PB_ETH_CFG1 0x00000400 /* PB 21 */
+#define CFG_PB_ETH_CFG2 0x00000200 /* PB 22 */
+#define CFG_PB_ETH_CFG3 0x00000100 /* PB 23 */
+
+/* Ethernet settings:
+ * MDIO not disabled, autonegotiation, 10/100Mbps, half/full duplex
+ */
+#define CFG_ETH_MDDIS_VALUE 0
+#define CFG_ETH_CFG1_VALUE 1
+#define CFG_ETH_CFG2_VALUE 1
+#define CFG_ETH_CFG3_VALUE 1
+
+/* PUMA configuration */
+#define CFG_PC_PUMA_PROG 0x0200 /* PC 6 */
+#define CFG_PC_PUMA_DONE 0x0008 /* PC 12 */
+#define CFG_PC_PUMA_INIT 0x0004 /* PC 13 */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR 0xF0000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Address accessed to reset the board - must not be mapped/assigned
+ */
+#define CFG_RESET_ADDRESS 0xFEFFFFFF
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0x40000000
+#if defined(DEBUG)
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#else
+#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
+#endif
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#if 1
+/* Start port with environment in flash; switch to SPI EEPROM later */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+#else
+/* Final version: environment in EEPROM */
+#define CFG_ENV_IS_IN_EEPROM 1
+#define CFG_ENV_OFFSET 2048
+#define CFG_ENV_SIZE 2048
+#endif
+
+/*-----------------------------------------------------------------------
+ * Hardware Information Block
+ */
+#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
+#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
+#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
+#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration 11-6
+ *-----------------------------------------------------------------------
+ * we must activate GPL5 in the SIUMCR for CAN
+ */
+#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control 11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register 11-27
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit
+ *
+ * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
+ */
+#ifdef CCM_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
+#define CFG_PLPRCR \
+ ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
+#else /* up to 50 MHz we use a 1:1 clock */
+#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#endif /* CCM_80MHz */
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register 15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK SCCR_EBDF11
+#ifdef CCM_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
+#define CFG_SCCR (/* SCCR_TBS | */ \
+ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
+ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFALCD00)
+#else /* up to 50 MHz we use a 1:1 clock */
+#define CFG_SCCR (SCCR_TBS | \
+ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
+ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFALCD00)
+#endif /* CCM_80MHz */
+
+/*-----------------------------------------------------------------------
+ *
+ * Interrupt Levels
+ *-----------------------------------------------------------------------
+ */
+#define CFG_CPM_INTERRUPT 13 /* SIU_LEVEL6 */
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER 0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
+#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
+
+/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
+#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
+ OR_SCY_5_CLK | OR_EHTR)
+
+#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+
+#define CFG_OR1_REMAP CFG_OR0_REMAP
+#define CFG_OR1_PRELIM CFG_OR0_PRELIM
+#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+
+/*
+ * BR2 and OR2 (SDRAM)
+ *
+ */
+#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
+#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
+#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
+#define CFG_OR_TIMING_SDRAM 0x00000A00
+
+#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
+#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+/*
+ * BR3 and OR3 (CAN Controller)
+ */
+#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
+#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
+#define CFG_OR3_CAN (CFG_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) | \
+ BR_PS_8 | BR_MS_UPMB | BR_V )
+
+/*
+ * BR4/OR4: PUMA Config
+ *
+ * Memory controller will be used in 2 modes:
+ *
+ * - "read" mode:
+ * BR4: 0x10100801 OR4: 0xffff8520
+ * - "load" mode (chip select on UPM B):
+ * BR4: 0x101004c1 OR4: 0xffff8600
+ *
+ * Default initialization is in "read" mode
+ */
+#define PUMA_CONF_BASE 0x10100000 /* PUMA Config */
+#define PUMA_CONF_OR_AM 0xFFFF8000 /* 32 kB */
+#define PUMA_CONF_LOAD_TIMING (OR_ACS_DIV2 | OR_SCY_2_CLK)
+#define PUMA_CONF_READ_TIMING (OR_G5LA | OR_BI | OR_SCY_2_CLK)
+
+#define PUMA_CONF_BR_LOAD ((PUMA_CONF_BASE & BR_BA_MSK) | \
+ BR_PS_8 | BR_MS_UPMB | BR_V)
+#define PUMA_CONF_OR_LOAD (PUMA_CONF_OR_AM | PUMA_CONF_LOAD_TIMING)
+
+#define PUMA_CONF_BR_READ ((PUMA_CONF_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define PUMA_CONF_OR_READ (PUMA_CONF_OR_AM | PUMA_CONF_READ_TIMING)
+
+#define CFG_BR4_PRELIM PUMA_CONF_BR_READ
+#define CFG_OR4_PRELIM PUMA_CONF_OR_READ
+
+/*
+ * BR5/OR5: PUMA: SMA Bus 8 Bit
+ * BR5: 0x10200401 OR5: 0xffe0010a
+ */
+#define PUMA_SMA8_BASE 0x10200000 /* PUMA SMA Bus 8 Bit */
+#define PUMA_SMA8_OR_AM 0xFFE00000 /* 2 MB */
+#define PUMA_SMA8_TIMING (OR_BI | OR_SCY_0_CLK | OR_EHTR)
+
+#define CFG_BR5_PRELIM ((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define CFG_OR5_PRELIM (PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
+
+/*
+ * BR6/OR6: PUMA: SMA Bus 16 Bit
+ * BR6: 0x10600801 OR6: 0xffe0010a
+ */
+#define PUMA_SMA16_BASE 0x10600000 /* PUMA SMA Bus 16 Bit */
+#define PUMA_SMA16_OR_AM 0xFFE00000 /* 2 MB */
+#define PUMA_SMA16_TIMING (OR_BI | OR_SCY_0_CLK | OR_EHTR)
+
+#define CFG_BR6_PRELIM ((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CFG_OR6_PRELIM (PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
+
+/*
+ * BR7/OR7: PUMA: external Flash
+ * BR7: 0x10a00801 OR7: 0xfe00010a
+ */
+#define PUMA_FLASH_BASE 0x10A00000 /* PUMA external Flash */
+#define PUMA_FLASH_OR_AM 0xFE000000 /* 32 MB */
+#define PUMA_FLASH_TIMING (OR_BI | OR_SCY_0_CLK | OR_EHTR)
+
+#define CFG_BR7_PRELIM ((PUMA_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CFG_OR7_PRELIM (PUMA_FLASH_OR_AM | PUMA_FLASH_TIMING | OR_SETA)
+
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+/* periodic timer for refresh */
+#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
+
+/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
+#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
+#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
+#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
+#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
new file mode 100644
index 0000000..6b98347
--- /dev/null
+++ b/include/configs/CPCI405.h
@@ -0,0 +1,333 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_405GP 1 /* This is a PPC405 CPU */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_CPCI405 1 /* ...on a CPCI405 board */
+
+#define CONFIG_BOARD_PRE_INIT 1 /* call board_pre_init() */
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+
+#if 0
+#define CONFIG_PREBOOT \
+ "crc32 f0207004 ffc 0;" \
+ "if cmp 0 f0207000 1;" \
+ "then;echo Old CRC is correct;crc32 f0207004 ff4 f0207000;" \
+ "else;echo Old CRC is bad;fi"
+#endif
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+ "bootm ffc00000 ffca0000"
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+ "bootm ffc00000"
+#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_PCI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_IDE | \
+ CFG_CMD_ELF | \
+ CFG_CMD_EEPROM )
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#undef CFG_HUSH_PARSER /* use "hush" command parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
+
+#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */
+#define CFG_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */
+#define CFG_BASE_BAUD 691200
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
+ 57600, 115200, 230400, 460800, 921600 }
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
+
+#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
+#define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */
+#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
+#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff
+ *-----------------------------------------------------------------------
+ */
+#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
+#undef CONFIG_IDE_LED /* no led for ide supported */
+#undef CONFIG_IDE_RESET /* no reset for ide supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */
+#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+
+#define CFG_ATA_BASE_ADDR 0xF0100000
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
+#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFFD0000
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
+#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
+#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
+/*
+ * The following defines are added for buggy IOP480 byte interface.
+ * All other boards should use the standard values (CPCI405 etc.)
+ */
+#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
+#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
+#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#if 1 /* Use NVRAM for environment variables */
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
+#define CFG_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */
+#define CFG_NVRAM_SIZE (32*1024) /* NVRAM size */
+#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
+#define CFG_ENV_ADDR \
+ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env */
+#define CFG_NVRAM_VXWORKS_OFFS 0x6900 /* Offset for VxWorks eth-addr */
+
+#else /* Use EEPROM for environment variables */
+
+#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
+#define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
+#define CFG_ENV_SIZE 0x200 /* 512 bytes may be used for env vars */
+ /* total size of a CAT24WC08 is 1024 bytes */
+#endif
+
+/*-----------------------------------------------------------------------
+ * I2C EEPROM (CAT24WC08) for environment
+ */
+#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
+ /* 16 byte page write mode using*/
+ /* last 4 bits of the address */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash Bank 0) initialization */
+#define CFG_EBC_PB0AP 0x92015480
+#define CFG_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (Flash Bank 1) initialization */
+#define CFG_EBC_PB1AP 0x92015480
+#define CFG_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 2 (CAN0, 1, 2, Codeswitch) initialization */
+#define CFG_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 3 (CompactFlash IDE) initialization */
+#define CFG_EBC_PB3AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB3CR 0xF011A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 4 (NVRAM) initialization */
+#define CFG_EBC_PB4AP 0x01005280 /* TWT=2,WBN=1,WBF=1,TH=1,SOR=1 */
+#define CFG_EBC_PB4CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 5 (Quart) initialization */
+#define CFG_EBC_PB5AP 0x04005B80 /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
+#define CFG_EBC_PB5CR 0xF0318000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit */
+
+/*-----------------------------------------------------------------------
+ * FPGA stuff
+ */
+
+/* FPGA program pin configuration */
+#define CFG_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */
+#define CFG_FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */
+#define CFG_FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */
+#define CFG_FPGA_INIT 0x00400000 /* FPGA init pin (ppc input) */
+#define CFG_FPGA_DONE 0x00800000 /* FPGA done pin (ppc input) */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+#if 1 /* test-only */
+#define CFG_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */
+
+#define CFG_INIT_RAM_ADDR 0x40000000 /* use data cache */
+#else
+#define CFG_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */
+#endif
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
new file mode 100644
index 0000000..0533827
--- /dev/null
+++ b/include/configs/CPCI4052.h
@@ -0,0 +1,378 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_405GP 1 /* This is a PPC405 CPU */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_CPCI405 1 /* ...on a CPCI405 board */
+#define CONFIG_CPCI405_VER2 1 /* ...version 2 */
+
+#define CONFIG_BOARD_PRE_INIT 1 /* call board_pre_init() */
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+
+#if 0
+#define CONFIG_PREBOOT \
+ "crc32 f0207004 ffc 0;" \
+ "if cmp 0 f0207000 1;" \
+ "then;echo Old CRC is correct;crc32 f0207004 ff4 f0207000;" \
+ "else;echo Old CRC is bad;fi"
+#endif
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+ "bootm ffc00000 ffca0000"
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+ "bootm ffc00000"
+#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address */
+
+#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_PCI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_IDE | \
+ CFG_CMD_ELF | \
+ CFG_CMD_DATE | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_I2C | \
+ CFG_CMD_EEPROM )
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#undef CFG_HUSH_PARSER /* use "hush" command parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
+
+#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */
+#define CFG_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */
+#define CFG_BASE_BAUD 691200
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
+ 57600, 115200, 230400, 460800, 921600 }
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
+
+#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
+#define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */
+#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
+#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff
+ *-----------------------------------------------------------------------
+ */
+#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
+#undef CONFIG_IDE_LED /* no led for ide supported */
+#define CONFIG_IDE_RESET 1 /* reset for ide supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */
+#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+
+#define CFG_ATA_BASE_ADDR 0xF0100000
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
+#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFFC0000
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
+#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
+#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
+/*
+ * The following defines are added for buggy IOP480 byte interface.
+ * All other boards should use the standard values (CPCI405 etc.)
+ */
+#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
+#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
+#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
+#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
+
+#if 0 /* Use NVRAM for environment variables */
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
+#define CFG_ENV_SIZE 0x0ff8 /* Size of Environment vars */
+#define CFG_ENV_ADDR \
+ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-(CFG_ENV_SIZE+8)) /* Env */
+
+#else /* Use EEPROM for environment variables */
+
+#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
+#define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
+#define CFG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars*/
+ /* total size of a CAT24WC16 is 2048 bytes */
+#endif
+
+#define CFG_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */
+#define CFG_NVRAM_SIZE (32*1024) /* NVRAM size */
+#define CFG_NVRAM_VXWORKS_OFFS 0x6900 /* Offset for VxWorks eth-addr */
+
+/*-----------------------------------------------------------------------
+ * I2C EEPROM (CAT24WC16) for environment
+ */
+#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
+ /* 16 byte page write mode using*/
+ /* last 4 bits of the address */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+ /* have only 8kB, 16kB is save here */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash Bank 0) initialization */
+#define CFG_EBC_PB0AP 0x92015480
+#define CFG_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (Flash Bank 1) initialization */
+#define CFG_EBC_PB1AP 0x92015480
+#define CFG_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 2 (CAN0, 1) initialization */
+#define CFG_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 3 (CompactFlash IDE) initialization */
+#define CFG_EBC_PB3AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB3CR 0xF011A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 4 (NVRAM/RTC) initialization */
+#define CFG_EBC_PB4AP 0x01005280 /* TWT=2,WBN=1,WBF=1,TH=1,SOR=1 */
+#define CFG_EBC_PB4CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 5 (optional Quart) initialization */
+#define CFG_EBC_PB5AP 0x04005B80 /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
+#define CFG_EBC_PB5CR 0xF0318000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 6 (FPGA internal) initialization */
+#define CFG_EBC_PB6AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB6CR 0xF041A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CFG_FPGA_BASE_ADDR 0xF0400000
+
+/*-----------------------------------------------------------------------
+ * FPGA stuff
+ */
+/* FPGA internal regs */
+#define CFG_FPGA_MODE 0x00
+#define CFG_FPGA_STATUS 0x02
+#define CFG_FPGA_TS 0x04
+#define CFG_FPGA_TS_LOW 0x06
+#define CFG_FPGA_TS_CAP0 0x10
+#define CFG_FPGA_TS_CAP0_LOW 0x12
+#define CFG_FPGA_TS_CAP1 0x14
+#define CFG_FPGA_TS_CAP1_LOW 0x16
+#define CFG_FPGA_TS_CAP2 0x18
+#define CFG_FPGA_TS_CAP2_LOW 0x1a
+#define CFG_FPGA_TS_CAP3 0x1c
+#define CFG_FPGA_TS_CAP3_LOW 0x1e
+
+/* FPGA Mode Reg */
+#define CFG_FPGA_MODE_CF_RESET 0x0001
+#define CFG_FPGA_MODE_TS_IRQ_ENABLE 0x0100
+#define CFG_FPGA_MODE_TS_IRQ_CLEAR 0x1000
+#define CFG_FPGA_MODE_TS_CLEAR 0x2000
+
+/* FPGA Status Reg */
+#define CFG_FPGA_STATUS_DIP0 0x0001
+#define CFG_FPGA_STATUS_DIP1 0x0002
+#define CFG_FPGA_STATUS_DIP2 0x0004
+#define CFG_FPGA_STATUS_FLASH 0x0008
+#define CFG_FPGA_STATUS_TS_IRQ 0x1000
+
+#define CFG_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */
+#define CFG_FPGA_MAX_SIZE 32*1024 /* 32kByte is enough for XC2S15 */
+
+/* FPGA program pin configuration */
+#define CFG_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */
+#define CFG_FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */
+#define CFG_FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */
+#define CFG_FPGA_INIT 0x00010000 /* FPGA init pin (ppc input) */
+#define CFG_FPGA_DONE 0x00008000 /* FPGA done pin (ppc input) */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+#if 1 /* test-only */
+#define CFG_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */
+
+#define CFG_INIT_RAM_ADDR 0x40000000 /* use data cache */
+#else
+#define CFG_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */
+#endif
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
new file mode 100644
index 0000000..6c8d7f6
--- /dev/null
+++ b/include/configs/CPCIISER4.h
@@ -0,0 +1,241 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_405GP 1 /* This is a PPC405 CPU */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_CPCIISER4 1 /* ...on a CPCIISER4 board */
+
+#define CONFIG_BOARD_PRE_INIT 1 /* call board_pre_init() */
+
+#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */
+
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND "bootm fff00000"
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_PCI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_ELF | \
+ CFG_CMD_EEPROM )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_EXT_SERIAL_CLOCK 1843200 /* use external serial clock */
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
+ 57600, 115200, 230400, 460800, 921600 }
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0404 /* PCI Device ID: CPCI-ISER4 */
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0xff000001 /* 16MB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0xffe00000 /* point to flash */
+#define CFG_PCI_PTM2MS 0xffe00001 /* 2MB, enable */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFFC0000
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
+#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
+#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
+/*
+ * The following defines are added for buggy IOP480 byte interface.
+ * All other boards should use the standard values (CPCI405 etc.)
+ */
+#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
+#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
+#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+/*-----------------------------------------------------------------------
+ * I2C EEPROM (CAT24WC08) for environment
+ */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
+ /* 16 byte page write mode using*/
+ /* last 4 bits of the address */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
+#define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
+#define CFG_ENV_SIZE 0x300 /* 768 bytes may be used for env vars */
+ /* total size of a CAT24WC08 is 1024 bytes */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM 0xFFF00000 /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash Bank 0) initialization */
+#define CFG_EBC_PB0AP 0x92015480
+#define CFG_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (Uart 8bit) initialization */
+#define CFG_EBC_PB1AP 0x01000480 /* TWT=2,TH=2,no Ready,BEM=0,SOR=1 */
+#define CFG_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 2 (Uart 32bit) initialization */
+#define CFG_EBC_PB2AP 0x000004c0 /* no Ready, BEM=1 */
+#define CFG_EBC_PB2CR 0xF011C000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=32bit */
+
+/* Memory Bank 3 (FPGA Reset) initialization */
+#define CFG_EBC_PB3AP 0x010004C0 /* no Ready, BEM=1 */
+#define CFG_EBC_PB3CR 0xF021A000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=16bit */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */
+#define CFG_INIT_RAM_END 0x0f00 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
new file mode 100644
index 0000000..b10d967
--- /dev/null
+++ b/include/configs/CRAYL1.h
@@ -0,0 +1,251 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * David Updegraff, Cray, Inc. dave@cray.com: our 405 is walnut-lite..
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_CRAYL1
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_405GP 1 /* This is a PPC405 CPU */
+#define CONFIG_4xx 1 /* ...member of PPC405 family */
+#define CONFIG_SYS_CLK_FREQ 25000000
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 1 /* PHY address; handling of ENET */
+#define CONFIG_BOARD_PRE_INIT 1 /* setup for 405gp */
+#define CONFIG_MISC_INIT_R 1 /* so that a misc_init_r() is called */
+
+/* set PRAM to keep U-Boot out, mem= to keep linux out, and initrd_hi to
+ * keep possible initrd ramdisk decompression out. This is in k (1024 bytes)
+ #define CONFIG_PRAM 16
+ */
+#define CONFIG_LOADADDR 0x100000
+#undef CONFIG_BOOTARGS
+
+/* the logic is that booting is driven by what env vars get set from DHCP.
+ * Normal DHCP sets things like serverip, rootpath, etc.
+ * if printenv
+ */
+#define CFG_AUTOLOAD "yes"
+#define CONFIG_BOOTCOMMAND "dhcp;"\
+ "setenv bootargs devfs=mount;"\
+ "setenv bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:::off $bootargs;"\
+ "if printenv initrd;"\
+ "then;" \
+ "setenv initrd_hi $mem;"\
+ "tftp 1000000 $initrd;"\
+ "setenv bootargs root=/dev/ram0 rw cwsroot=$serverip:$rootpath $bootargs;"\
+ "bootm 100000 1000000;"\
+ "else;"\
+ "setenv bootargs root=/dev/nfs ro nfsroot=$serverip:$rootpath $bootargs;"\
+ "bootm 100000;"\
+ "fi;"
+
+#define CONFIG_EXTRA_ENV_SETTINGS ""
+
+/*
+ * ..during experiments..
+ #define CONFIG_SERVERIP 10.0.0.1
+ #define CONFIG_ETHADDR 00:40:a6:80:14:5
+ */
+#define CONFIG_HARD_I2C 1 /* hardware support for i2c */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_IDENT_STRING "Cray L1"
+#define CONFIG_ENV_OVERWRITE 1
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_HUSH_PARSER 1
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+
+#define CONFIG_COMMANDS (\
+ CFG_CMD_BDI|\
+ CFG_CMD_IMI|\
+ CFG_CMD_FLASH|\
+ CFG_CMD_MEMORY|\
+ CFG_CMD_NET|\
+ CFG_CMD_ENV|\
+ CFG_CMD_CONSOLE|\
+ CFG_CMD_ASKENV|\
+ CFG_CMD_ECHO|\
+ CFG_CMD_IMMAP|\
+ CFG_CMD_REGINFO|\
+ CFG_CMD_DHCP|\
+ CFG_CMD_DATE|\
+ CFG_CMD_RUN|\
+ CFG_CMD_I2C|\
+ CFG_CMD_EEPROM|\
+ CFG_CMD_SETGETDCR)
+
+/*
+ * optional BOOTP / DHCP fields
+ */
+#define CONFIG_BOOTP_MASK (\
+ CONFIG_BOOTP_VENDOREX|\
+ CONFIG_BOOTP_SUBNETMASK|\
+ CONFIG_BOOTP_GATEWAY|\
+ CONFIG_BOOTP_DNS|\
+ CONFIG_BOOTP_HOSTNAME|\
+ CONFIG_BOOTP_BOOTFILESIZE|\
+ CONFIG_BOOTP_BOOTPATH)
+
+/*
+ * bauds. Just to make it compile; in our case, I read the base_baud
+ * from the DCR anyway, so its kinda-tied to the above ref. clock which in turn
+ * drives the system clock.
+ */
+#define CFG_BASE_BAUD 403225
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+
+
+#define CFG_LOAD_ADDR 0x100000/* where to load what we get from TFTP */
+#define CFG_TFTP_LOADADDR CFG_LOAD_ADDR
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFC00000
+#define CFG_MONITOR_BASE TEXT_BASE
+
+#ifndef CFG_HUSH_PARSER
+#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128 kB for Monitor */
+#define CFG_ENV_OFFSET 0x3D0000
+#else
+#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */
+#define CFG_ENV_OFFSET 0x3FE000
+#endif
+
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/* BEG ENVIRONNEMENT FLASH: needs to be a whole FlashSector */
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
+
+/* Memory tests: U-Boot relocates itself to the top of Ram, so its at
+ * 32meg-(128k+some_malloc_space+copy-of-ENV sector)..
+ */
+#define CFG_SDRAM_SIZE 32 /* megs of ram */
+#define CFG_MEMTEST_START 0x2000 /* memtest works from the end of */
+ /* the exception vector table */
+ /* to the end of the DRAM */
+ /* less monitor and malloc area */
+#define CFG_STACK_USAGE 0x10000 /* Reserve 64k for the stack usage */
+#define CFG_MEM_END_USAGE ( CFG_MONITOR_LEN \
+ + CFG_MALLOC_LEN \
+ + CFG_ENV_SECT_SIZE \
+ + CFG_STACK_USAGE )
+
+#define CFG_MEMTEST_END (CFG_SDRAM_SIZE * 1024 * 1024 - CFG_MEM_END_USAGE)
+/* END ENVIRONNEMENT FLASH */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration. Only used to ..?? clear it, I guess..
+ */
+#define CFG_DCACHE_SIZE 16384
+#define CFG_CACHELINE_SIZE 32
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in OnChipMem )
+ */
+#if 0
+#define CFG_INIT_RAM_ADDR 0x40000000 /* use data cache */
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#else
+#define CFG_TEMP_STACK_OCM 1
+#define CFG_OCM_DATA_ADDR 0xF0000000
+#define CFG_OCM_DATA_SIZE 0x1000
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of On Chip SRAM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of On Chip SRAM */
+#endif
+
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Definitions for Serial Presence Detect EEPROM address
+ */
+#define EEPROM_WRITE_ADDRESS 0xA0
+#define EEPROM_READ_ADDRESS 0xA1
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
new file mode 100644
index 0000000..ed38ef6
--- /dev/null
+++ b/include/configs/CU824.h
@@ -0,0 +1,305 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ *
+ * Configuration settings for the CU824 board.
+ *
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X 1
+#define CONFIG_MPC8240 1
+#define CONFIG_CU824 1
+
+
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 9600
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
+
+#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+
+#define CONFIG_BOOTCOMMAND "bootm FE020000" /* autoboot command */
+#define CONFIG_BOOTDELAY 5
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_PCI | \
+ 0/* CFG_CMD_DATE */ )
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+ */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+
+#if 1
+#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
+#endif
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* Print Buffer Size
+ */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFF000000
+
+#define CFG_RESET_ADDRESS 0xFFF00100
+
+#define CFG_EUMB_ADDR 0xFCE00000
+
+#define CFG_MONITOR_BASE TEXT_BASE
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
+#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
+
+ /* Maximum amount of RAM.
+ */
+#define CFG_MAX_RAM_SIZE 0x10000000
+
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#undef CFG_RAMBOOT
+#else
+#define CFG_RAMBOOT
+#endif
+
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+
+ /* Size in bytes reserved for initial data
+ */
+#define CFG_GBL_DATA_SIZE 128
+
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE 4
+
+#define CFG_NS16550_CLK (14745600 / 2)
+
+#define CFG_NS16550_COM1 0xFE800080
+#define CFG_NS16550_COM2 0xFE8000C0
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ * For the detail description refer to the MPC8240 user's manual.
+ */
+
+#define CONFIG_SYS_CLK_FREQ 33000000
+#define CFG_HZ 1000
+
+ /* Bit-field values for MCCR1.
+ */
+#define CFG_ROMNAL 0
+#define CFG_ROMFAL 7
+
+ /* Bit-field values for MCCR2.
+ */
+#define CFG_REFINT 430 /* Refresh interval */
+
+ /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
+ */
+#define CFG_BSTOPRE 192
+
+ /* Bit-field values for MCCR3.
+ */
+#define CFG_REFREC 2 /* Refresh to activate interval */
+#define CFG_RDLAT 3 /* Data latancy from read command */
+
+ /* Bit-field values for MCCR4.
+ */
+#define CFG_PRETOACT 2 /* Precharge to activate interval */
+#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
+#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */
+#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
+#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */
+#define CFG_ACTORW 2
+#define CFG_REGISTERD_TYPE_BUFFER 1
+
+/* Memory bank settings.
+ * Only bits 20-29 are actually used from these vales to set the
+ * start/end addresses. The upper two bits will always be 0, and the lower
+ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
+ * address. Refer to the MPC8240 book.
+ */
+
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START 0x3ff00000
+#define CFG_BANK1_END 0x3fffffff
+#define CFG_BANK1_ENABLE 0
+#define CFG_BANK2_START 0x3ff00000
+#define CFG_BANK2_END 0x3fffffff
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x3ff00000
+#define CFG_BANK3_END 0x3fffffff
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x3ff00000
+#define CFG_BANK4_END 0x3fffffff
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x3ff00000
+#define CFG_BANK5_END 0x3fffffff
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x3ff00000
+#define CFG_BANK6_END 0x3fffffff
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x3ff00000
+#define CFG_BANK7_END 0x3fffffff
+#define CFG_BANK7_ENABLE 0
+
+#define CFG_ODCR 0xff
+
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT3L (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* Max number of flash banks */
+#define CFG_MAX_FLASH_SECT 39 /* Max number of sectors in one bank */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+ /* Warining: environment is not EMBEDDED in the U-Boot code.
+ * It's stored in flash separately.
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#if 0
+#define CFG_ENV_ADDR 0xFF008000
+#define CFG_ENV_SIZE 0x8000 /* Size of the Environment Sector */
+#else
+#define CFG_ENV_ADDR 0xFFFC0000
+#define CFG_ENV_SIZE 0x4000 /* Size of the Environment */
+#define CFG_ENV_OFFSET 0 /* starting right at the beginning */
+#define CFG_ENV_SECT_SIZE 0x40000 /* Size of the Environment Sector */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP
+
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+
+#define CONFIG_TULIP
+#define CONFIG_TULIP_USE_IO
+
+#define CFG_ETH_DEV_FN 0x7800
+#define CFG_ETH_IOBASE 0x00104000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
new file mode 100644
index 0000000..1bf40d9
--- /dev/null
+++ b/include/configs/DU405.h
@@ -0,0 +1,303 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_405GP 1 /* This is a PPC405 CPU */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_DU405 1 /* ...on a DU405 board */
+
+#define CONFIG_BOARD_PRE_INIT 1 /* call board_pre_init() */
+
+#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */
+
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND "bootm fff00000"
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_PCI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_IDE | \
+ CFG_CMD_ELF | \
+ CFG_CMD_DATE | \
+ CFG_CMD_EEPROM )
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_RTC_MC146818 /* BQ3285 is MC146818 compatible*/
+#define CFG_RTC_REG_BASE_ADDR 0xF0000080 /* RTC Base Address */
+
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external serial clock */
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
+ 57600, 115200, 230400, 460800, 921600 }
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0404 /* PCI Device ID: CPCI-ISER4 */
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0xff000001 /* 16MB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0xffe00000 /* point to flash */
+#define CFG_PCI_PTM2MS 0xffe00001 /* 2MB, enable */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff
+ *-----------------------------------------------------------------------
+ */
+#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
+#undef CONFIG_IDE_LED /* no led for ide supported */
+#undef CONFIG_IDE_RESET /* no reset for ide supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */
+#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+
+#define CFG_ATA_BASE_ADDR 0xF0100000
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
+#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFFD0000
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
+#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
+#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
+/*
+ * The following defines are added for buggy IOP480 byte interface.
+ * All other boards should use the standard values (CPCI405 etc.)
+ */
+#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
+#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
+#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+/*-----------------------------------------------------------------------
+ * I2C EEPROM (CAT24WC08) for environment
+ */
+#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
+ /* 16 byte page write mode using*/
+ /* last 4 bits of the address */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
+#define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
+#define CFG_ENV_SIZE 0x400 /* 1024 bytes may be used for env vars */
+ /* total size of a CAT24WC08 is 1024 bytes */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+#define FLASH0_BA 0xFFC00000 /* FLASH 0 Base Address */
+#define FLASH1_BA 0xFF800000 /* FLASH 1 Base Address */
+#define CAN_BA 0xF0000000 /* CAN Base Address */
+#define DUART_BA 0xF0300000 /* DUART Base Address */
+#define CF_BA 0xF0100000 /* CompactFlash Base Address */
+#define SRAM_BA 0xF0200000 /* SRAM Base Address */
+#define DURAG_IO_BA 0xF0400000 /* DURAG Bus IO Base Address */
+#define DURAG_MEM_BA 0xF0500000 /* DURAG Bus Mem Base Address */
+
+#define FPGA_MODE_REG (DUART_BA+0x80) /* FPGA Mode Register */
+
+/* Memory Bank 0 (Flash Bank 0) initialization */
+#define CFG_EBC_PB0AP 0x92015480
+#define CFG_EBC_PB0CR FLASH0_BA | 0x5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (Flash Bank 1) initialization */
+#define CFG_EBC_PB1AP 0x92015480
+#define CFG_EBC_PB1CR FLASH1_BA | 0x5A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 2 (CAN0) initialization */
+#define CFG_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB2CR CAN_BA | 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 3 (DUART) initialization */
+#define CFG_EBC_PB3AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB3CR DUART_BA | 0x18000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 4 (CompactFlash IDE) initialization */
+#define CFG_EBC_PB4AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB4CR CF_BA | 0x1A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 5 (SRAM) initialization */
+#define CFG_EBC_PB5AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB5CR SRAM_BA | 0x1A000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 6 (DURAG Bus IO Space) initialization */
+#define CFG_EBC_PB6AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB6CR DURAG_IO_BA | 0x18000 /* BAS=0xF04,BS=1MB,BU=R/W,BW=8bit*/
+
+/* Memory Bank 7 (DURAG Bus Mem Space) initialization */
+#define CFG_EBC_PB7AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB7CR DURAG_MEM_BA | 0x18000 /* BAS=0xF05,BS=1MB,BU=R/W,BW=8bit */
+
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+
+/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h
new file mode 100644
index 0000000..fa7e1f6
--- /dev/null
+++ b/include/configs/EVB64260.h
@@ -0,0 +1,428 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/processor.h>
+
+#ifndef __ASSEMBLY__
+#include <galileo/core.h>
+#endif
+
+#include "../board/evb64260/local.h"
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_EVB64260 1 /* this is an EVB64260 board */
+#define CFG_GT_6426x GT_64260 /* with a 64260 system controller */
+
+#define CONFIG_BAUDRATE 38400 /* console baudrate = 38400 */
+
+#undef CONFIG_ECC /* enable ECC support */
+/* #define CONFIG_EVB64260_750CX 1 */ /* Support the EVB-64260-750CX Board */
+
+/* which initialization functions to call for this board */
+#define CONFIG_MISC_INIT_R 1
+#define CONFIG_BOARD_PRE_INIT 1
+
+#ifndef CONFIG_EVB64260_750CX
+#define CFG_BOARD_NAME "EVB64260"
+#else
+#define CFG_BOARD_NAME "EVB64260-750CX"
+#endif
+
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+/*
+ * The following defines let you select what serial you want to use
+ * for your console driver.
+ *
+ * what to do:
+ * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial
+ * cable onto the second DUART channel, change the CFG_DUART port from 1
+ * to 0 below.
+ *
+ * to use the MPSC, #define CONFIG_MPSC. If you have wired up another
+ * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
+ */
+#define CONFIG_MPSC
+#define CONFIG_MPSC_PORT 0
+
+#define CONFIG_NET_MULTI /* attempt all available adapters */
+
+/* define this if you want to enable GT MAC filtering */
+#define CONFIG_GT_USE_MAC_HASH_TABLE
+
+#undef CONFIG_ETHER_PORT_MII /* use RMII */
+
+#if 1
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND \
+ "bootp && " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:" \
+ "$netmask:$hostname:eth0:none; && " \
+ "bootm"
+
+#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
+#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+#undef CONFIG_ALTIVEC /* undef to disable */
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
+ CONFIG_BOOTP_BOOTFILESIZE)
+
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ASKENV)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x00300000 /* default load address */
+
+#define CFG_HZ 1000 /* decr freq: 1ms ticks */
+#define CFG_BUS_HZ 100000000 /* 100 MHz */
+#define CFG_BUS_CLK CFG_BUS_HZ
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#ifdef CONFIG_EVB64260_750CX
+#define CONFIG_750CX
+#define CFG_BROKEN_CL2
+#endif
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_RAM_LOCK
+
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xfff00000
+#define CFG_RESET_ADDRESS 0xfff00100
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
+
+/* areas to map different things with the GT in physical space */
+#define CFG_DRAM_BANKS 4
+#define CFG_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */
+
+/* What to put in the bats. */
+#define CFG_MISC_REGION_BASE 0xf0000000
+
+/* Peripheral Device section */
+#define CFG_GT_REGS 0xf8000000
+#define CFG_DEV_BASE 0xfc000000
+
+#define CFG_DEV0_SPACE CFG_DEV_BASE
+#define CFG_DEV1_SPACE (CFG_DEV0_SPACE + CFG_DEV0_SIZE)
+#define CFG_DEV2_SPACE (CFG_DEV1_SPACE + CFG_DEV1_SIZE)
+#define CFG_DEV3_SPACE (CFG_DEV2_SPACE + CFG_DEV2_SIZE)
+
+#define CFG_DEV0_SIZE _8M /* evb64260 sram @ 0xfc00.0000 */
+#define CFG_DEV1_SIZE _8M /* evb64260 rtc @ 0xfc80.0000 */
+#define CFG_DEV2_SIZE _16M /* evb64260 duart @ 0xfd00.0000 */
+#define CFG_DEV3_SIZE _16M /* evb64260 flash @ 0xfe00.0000 */
+
+#define CFG_DEV0_PAR 0x20205093
+#define CFG_DEV1_PAR 0xcfcfffff
+#define CFG_DEV2_PAR 0xc0059bd4
+#define CFG_8BIT_BOOT_PAR 0xc00b5e7c
+#define CFG_32BIT_BOOT_PAR 0xc4a8241c
+ /* c 4 a 8 2 4 1 c */
+ /* 33 22|2222|22 22|111 1|11 11|1 1 | | */
+ /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
+ /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */
+ /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */
+
+#if 0 /* Wrong?? NTL */
+#define CFG_MPP_CONTROL_0 0x53541717 /* InitAct EOT[4] DBurst TCEn[1] */
+ /* DMAAck[1:0] GNT0[1:0] */
+#else
+#define CFG_MPP_CONTROL_0 0x53547777 /* InitAct EOT[4] DBurst TCEn[1] */
+ /* REQ0[1:0] GNT0[1:0] */
+#endif
+#define CFG_MPP_CONTROL_1 0x44009911 /* TCEn[4] TCTcnt[4] GPP[13:12] */
+ /* DMAReq[4] DMAAck[4] WDNMI WDE */
+#if 0 /* Wrong?? NTL */
+#define CFG_MPP_CONTROL_2 0x40091818 /* TCTcnt[0] GPP[22:21] BClkIn */
+ /* DMAAck[1:0] GNT1[1:0] */
+#else
+#define CFG_MPP_CONTROL_2 0x40098888 /* TCTcnt[0] */
+ /* GPP[22] (RS232IntB or PCI1Int) */
+ /* GPP[21] (RS323IntA) */
+ /* BClkIn */
+ /* REQ1[1:0] GNT1[1:0] */
+#endif
+
+#if 0 /* Wrong?? NTL */
+# define CFG_MPP_CONTROL_3 0x00090066 /* GPP[31:29] BClkOut0 */
+ /* GPP[27:26] Int[1:0] */
+#else
+# define CFG_MPP_CONTROL_3 0x22090066 /* MREQ MGNT */
+ /* GPP[29] (PCI1Int) */
+ /* BClkOut0 */
+ /* GPP[27] (PCI0Int) */
+ /* GPP[26] (RtcInt or PCI1Int) */
+ /* CPUInt[25:24] */
+#endif
+
+# define CFG_SERIAL_PORT_MUX 0x00000102 /* 0=hiZ 1=MPSC0 2=ETH 0 and 2 RMII */
+
+#if 0 /* Wrong?? - NTL */
+# define CFG_GPP_LEVEL_CONTROL 0x000002c6
+#else
+# define CFG_GPP_LEVEL_CONTROL 0x2c600000 /* 0010 1100 0110 0000 */
+ /* gpp[29] */
+ /* gpp[27:26] */
+ /* gpp[22:21] */
+
+# define CFG_SDRAM_CONFIG 0xd8e18200 /* 0x448 */
+ /* idmas use buffer 1,1
+ comm use buffer 0
+ pci use buffer 1,1
+ cpu use buffer 0
+ normal load (see also ifdef HVL)
+ standard SDRAM (see also ifdef REG)
+ non staggered refresh */
+ /* 31:26 25 23 20 19 18 16 */
+ /* 110110 00 111 0 0 00 1 */
+ /* refresh_count=0x200
+ phisical interleaving disable
+ virtual interleaving enable */
+ /* 15 14 13:0 */
+ /* 1 0 0x200 */
+#endif
+
+#define CFG_DUART_IO CFG_DEV2_SPACE
+#define CFG_DUART_CHAN 1 /* channel to use for console */
+#define CFG_INIT_CHAN1
+#define CFG_INIT_CHAN2
+
+#define SRAM_BASE CFG_DEV0_SPACE
+#define SRAM_SIZE 0x00100000 /* 1 MB of sram */
+
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+/* PCI MEMORY MAP section */
+#define CFG_PCI0_MEM_BASE 0x80000000
+#define CFG_PCI0_MEM_SIZE _128M
+#define CFG_PCI1_MEM_BASE 0x88000000
+#define CFG_PCI1_MEM_SIZE _128M
+
+#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE)
+#define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE)
+
+
+
+/* PCI I/O MAP section */
+#define CFG_PCI0_IO_BASE 0xfa000000
+#define CFG_PCI0_IO_SIZE _16M
+#define CFG_PCI1_IO_BASE 0xfb000000
+#define CFG_PCI1_IO_SIZE _16M
+
+#define CFG_PCI0_IO_SPACE (CFG_PCI0_IO_BASE)
+#define CFG_PCI0_IO_SPACE_PCI 0x00000000
+#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE)
+#define CFG_PCI1_IO_SPACE_PCI 0x00000000
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+
+#define CFG_NS16550_REG_SIZE -4
+
+#define CFG_NS16550_CLK 3686400
+
+#define CFG_NS16550_COM1 (CFG_DUART_IO + 0)
+#define CFG_NS16550_COM2 (CFG_DUART_IO + 0x20)
+
+/*----------------------------------------------------------------------
+ * Initial BAT mappings
+ */
+
+/* NOTES:
+ * 1) GUARDED and WRITE_THRU not allowed in IBATS
+ * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
+ */
+
+/* SDRAM */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT0U CFG_IBAT0U
+
+/* init ram */
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+
+/* PCI0, PCI1 in one BAT */
+#define CFG_IBAT2L BATL_NO_ACCESS
+#define CFG_IBAT2U CFG_DBAT2U
+#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* GT regs, bootrom, all the devices, PCI I/O */
+#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
+#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
+#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U CFG_IBAT3U
+
+/* I2C speed and slave address (for compatability) defaults */
+#define CFG_I2C_SPEED 400000
+#define CFG_I2C_SLAVE 0x7F
+
+/* I2C addresses for the two DIMM SPD chips */
+#ifndef CONFIG_EVB64260_750CX
+#define DIMM0_I2C_ADDR 0x56
+#define DIMM1_I2C_ADDR 0x54
+#else /* CONFIG_EVB64260_750CX - only has 1 DIMM */
+#define DIMM0_I2C_ADDR 0x54
+#define DIMM1_I2C_ADDR 0x54
+#endif
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
+
+#define CFG_EXTRA_FLASH_DEVICE DEVICE3 /* extra flash at device 3 */
+#define CFG_EXTRA_FLASH_WIDTH 4 /* 32 bit */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_CFI 1
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x10000
+#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * L2CR setup -- make sure this is right for your board!
+ * look in include/mpc74xx.h for the defines used here
+ */
+
+#define CFG_L2
+
+#ifdef CONFIG_750CX
+#define L2_INIT 0
+#else
+#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
+ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
+#endif
+
+#define L2_ENABLE (L2_INIT | L2CR_L2E)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_BOARD_ASM_INIT 1
+
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h
new file mode 100644
index 0000000..03765a3
--- /dev/null
+++ b/include/configs/MUSENKI.h
@@ -0,0 +1,297 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ *
+ * Configuration settings for the MUSENKI board.
+ *
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X 1
+#define CONFIG_MPC8245 1
+#define CONFIG_MUSENKI 1
+
+
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 9600
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_BOOTDELAY 5
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+
+#include <cmd_confdefs.h>
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#undef CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+
+/* Print Buffer Size
+ */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_MAXARGS 8 /* Max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP
+
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+
+#define CONFIG_TULIP
+
+#define PCI_ENET0_IOADDR 0x80000000
+#define PCI_ENET0_MEMADDR 0x80000000
+#define PCI_ENET1_IOADDR 0x81000000
+#define PCI_ENET1_MEMADDR 0x81000000
+
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+
+#define CFG_FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank on RCS#0 */
+#define CFG_FLASH_BASE1_PRELIM 0xFF000000 /* FLASH bank on RCS#1 */
+#define CFG_FLASH_BASE CFG_FLASH_BASE0_PRELIM
+
+/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
+ * reset vector is actually located at FFB00100, but the 8245
+ * takes care of us.
+ */
+#define CFG_RESET_ADDRESS 0xFFF00100
+
+#define CFG_EUMB_ADDR 0xFC000000
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
+#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
+
+ /* Maximum amount of RAM.
+ */
+#define CFG_MAX_RAM_SIZE 0x08000000 /* 0 .. 128 MB of (S)DRAM */
+
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#undef CFG_RAMBOOT
+#else
+#define CFG_RAMBOOT
+#endif
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE 1
+
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500)
+#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600)
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+
+/* #define CFG_MONITOR_BASE TEXT_BASE */
+/*#define CFG_GBL_DATA_SIZE 256*/
+#define CFG_GBL_DATA_SIZE 128
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ * For the detail description refer to the MPC8240 user's manual.
+ */
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+#define CFG_HZ 1000
+
+ /* Bit-field values for MCCR1.
+ */
+#define CFG_ROMNAL 7
+#define CFG_ROMFAL 11
+#define CFG_DBUS_SIZE 0x3
+
+ /* Bit-field values for MCCR2.
+ */
+#define CFG_TSWAIT 0x5 /* Transaction Start Wait States timer */
+#define CFG_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */
+
+ /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
+ */
+#define CFG_BSTOPRE 121
+
+ /* Bit-field values for MCCR3.
+ */
+#define CFG_REFREC 8 /* Refresh to activate interval */
+
+ /* Bit-field values for MCCR4.
+ */
+#define CFG_PRETOACT 3 /* Precharge to activate interval FIXME: was 2 */
+#define CFG_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */
+#define CFG_ACTORW 3 /* FIXME was 2 */
+#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
+#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
+#define CFG_REGISTERD_TYPE_BUFFER 1
+#define CFG_EXTROM 1
+#define CFG_REGDIMM 0
+
+#define CFG_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
+
+#define CFG_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
+
+/* Memory bank settings.
+ * Only bits 20-29 are actually used from these vales to set the
+ * start/end addresses. The upper two bits will always be 0, and the lower
+ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
+ * address. Refer to the MPC8240 book.
+ */
+
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START 0x3ff00000
+#define CFG_BANK1_END 0x3fffffff
+#define CFG_BANK1_ENABLE 0
+#define CFG_BANK2_START 0x3ff00000
+#define CFG_BANK2_END 0x3fffffff
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x3ff00000
+#define CFG_BANK3_END 0x3fffffff
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x3ff00000
+#define CFG_BANK4_END 0x3fffffff
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x3ff00000
+#define CFG_BANK5_END 0x3fffffff
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x3ff00000
+#define CFG_BANK6_END 0x3fffffff
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x3ff00000
+#define CFG_BANK7_END 0x3fffffff
+#define CFG_BANK7_ENABLE 0
+
+#define CFG_ODCR 0xff
+
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* Max number of flash banks */
+#define CFG_MAX_FLASH_SECT 64 /* Max number of sectors per flash */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+
+ /* Warining: environment is not EMBEDDED in the U-Boot code.
+ * It's stored in flash separately.
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0xFFFF0000
+#define CFG_ENV_SIZE 0x00010000 /* Size of the Environment */
+#define CFG_ENV_SECT_SIZE 0x20000 /* Size of the Environment Sector */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h
new file mode 100644
index 0000000..d10fa8f
--- /dev/null
+++ b/include/configs/MVS1.h
@@ -0,0 +1,406 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
+#define CONFIG_MVS 1 /* ...on a MVsensor module */
+#define CONFIG_MVS_16BIT_FLASH /* ...with 16-bit flash access */
+#define CONFIG_8xx_GCLK_FREQ 50000000/* ... and a 50 MHz CPU */
+
+#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
+
+#undef CONFIG_8xx_CONS_SMC1 /* Console is *NOT* on SMC1 */
+#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
+#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_BAUDRATE 115200 /* console baudrate */
+#define CONFIG_BOOTDELAY 5 /* autoboot after this many seconds */
+
+#define CONFIG_PREBOOT "echo;echo To mount root over NFS use \"run bootnet\";echo To mount root from FLASH use \"run bootflash\";echo"
+#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw"
+#define CONFIG_BOOTCOMMAND \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+ "bootm"
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
+
+#define CONFIG_WATCHDOG /* watchdog disabled/enabled */
+
+#undef CONFIG_STATUS_LED /* Status LED disabled/enabled */
+
+#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_VENDOREX )
+
+#undef CONFIG_MAC_PARTITION
+#undef CONFIG_DOS_PARTITION
+
+#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
+
+/* MVsensor uses a really minimal U-Boot ! */
+#define CONFIG_COMMANDS (CFG_CMD_LOADS | \
+ CFG_CMD_LOADB | \
+ CFG_CMD_IMI | \
+ CFG_CMD_FLASH | \
+ CFG_CMD_MEMORY | \
+ CFG_CMD_NET | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ENV | \
+ CFG_CMD_BOOTD | \
+ CFG_CMD_RUN )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#undef CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#undef CFG_HUSH_PARSER /* Hush parse for U-Boot ?? */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR 0xFFF00000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0x40000000
+
+#define CFG_MONITOR_LEN (128 << 10) /* Reserve 192 kB for Monitor */
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip (for AMD320DB chip) */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_ENV_IS_IN_FLASH 1
+
+/* 4MB flash - use bottom sectors of a bottom boot sector flash (16 bit access) */
+#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector (bottom boot sector) */
+#define CFG_ENV_SIZE 0x2000 /* Used Size of Environment Sector 8k */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration 11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control 11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register 11-27
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit
+ *
+ */
+#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register 15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK SCCR_EBDF11
+#define CFG_SCCR (SCCR_TBS | \
+ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
+ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFALCD00)
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
+#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
+#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
+#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR (0xEC000000)
+#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_PCCARD 0 /* **DON'T** Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_RESET /* reset for ide not supported */
+
+#define CFG_IDE_MAXBUS 0 /* max. no. of IDE buses */
+#define CFG_IDE_MAXDEVICE 0 /* max. no. of drives per IDE bus */
+
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET 0x0100
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+/*#define CFG_DER 0x2002000F*/
+#define CFG_DER 0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
+#undef FLASH_BASE1_PRELIM
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
+#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
+
+
+/*
+ * FLASH timing:
+ */
+/* 50 MHz CPU - 50 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 2, EHTR = 1 */
+#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
+ OR_SCY_2_CLK | OR_EHTR | OR_BI)
+/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
+/*
+#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
+ OR_SCY_5_CLK | OR_EHTR)
+*/
+
+#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#ifdef CONFIG_MVS_16BIT_FLASH
+#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#else
+#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )
+#endif
+
+#undef CFG_OR1_REMAP
+#undef CFG_OR1_PRELIM
+#undef CFG_BR1_PRELIM
+/*
+ * BR2/3 and OR2/3 (SDRAM)
+ *
+ */
+#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
+#undef SDRAM_BASE3_PRELIM
+#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
+#define CFG_OR_TIMING_SDRAM 0x00000A00
+
+#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
+#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+#undef CFG_OR3_PRELIM
+#undef CFG_BR3_PRELIM
+
+
+/*
+ * Memory Periodic Timer Prescaler
+ *
+ * The Divider for PTA (refresh timer) configuration is based on an
+ * example SDRAM configuration (64 MBit, one bank). The adjustment to
+ * the number of chip selects (NCS) and the actually needed refresh
+ * rate is done by setting MPTPR.
+ *
+ * PTA is calculated from
+ * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
+ *
+ * gclk CPU clock (not bus clock!)
+ * Trefresh Refresh cycle * 4 (four word bursts used)
+ *
+ * 4096 Rows from SDRAM example configuration
+ * 1000 factor s -> ms
+ * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
+ * 4 Number of refresh cycles per period
+ * 64 Refresh cycle in ms per number of rows
+ * --------------------------------------------
+ * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
+ *
+ * 50 MHz => 50.000.000 / Divider = 98
+ * 66 Mhz => 66.000.000 / Divider = 129
+ * 80 Mhz => 80.000.000 / Divider = 156
+ */
+#define CFG_MAMR_PTA 98
+
+/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
+#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
+#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
+#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
+#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A7 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
new file mode 100644
index 0000000..5971fb4
--- /dev/null
+++ b/include/configs/OCRTC.h
@@ -0,0 +1,298 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_405GP 1 /* This is a PPC405 CPU */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_OCRTC 1 /* ...on a OCRTC board */
+
+#define CONFIG_BOARD_PRE_INIT 1 /* call board_pre_init() */
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND "go fff00100"
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_PCI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_ELF | \
+ CFG_CMD_EEPROM )
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */
+#define CFG_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */
+#define CFG_BASE_BAUD 691200
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
+ 57600, 115200, 230400, 460800, 921600 }
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
+
+#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0410 /* PCI Device ID: OCRTC */
+#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
+#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFFD0000
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
+#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
+#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
+/*
+ * The following defines are added for buggy IOP480 byte interface.
+ * All other boards should use the standard values (CPCI405 etc.)
+ */
+#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
+#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
+#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#if 0 /* Use NVRAM for environment variables */
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
+#define CFG_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */
+#define CFG_NVRAM_SIZE (32*1024) /* NVRAM size */
+#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
+#define CFG_ENV_ADDR \
+ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env */
+#define CFG_NVRAM_VXWORKS_OFFS 0x6900 /* Offset for VxWorks eth-addr */
+
+#else /* Use EEPROM for environment variables */
+
+#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
+#define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
+#define CFG_ENV_SIZE 0x300 /* 768 bytes may be used for env vars */
+ /* total size of a CAT24WC08 is 1024 bytes */
+#endif
+
+/*-----------------------------------------------------------------------
+ * I2C EEPROM (CAT24WC08) for environment
+ */
+#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
+ /* 16 byte page write mode using*/
+ /* last 4 bits of the address */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash Bank 0) initialization */
+#define CFG_EBC_PB0AP 0x92015480
+#define CFG_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (Flash Bank 1) initialization */
+#define CFG_EBC_PB1AP 0x92015480
+#define CFG_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 2 (PLD - FPGA-boot) initialization */
+#define CFG_EBC_PB2AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+ /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
+#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 3 (PLD - OSL) initialization */
+#define CFG_EBC_PB3AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+ /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
+#define CFG_EBC_PB3CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 4 (Spartan2 1) initialization */
+#define CFG_EBC_PB4AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+ /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
+#define CFG_EBC_PB4CR 0xF209C000 /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/
+
+/* Memory Bank 5 (Spartan2 2) initialization */
+#define CFG_EBC_PB5AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+ /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
+#define CFG_EBC_PB5CR 0xF309C000 /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/
+
+/* Memory Bank 6 (Virtex 1) initialization */
+#define CFG_EBC_PB6AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+ /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
+#define CFG_EBC_PB6CR 0xF409A000 /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/
+
+/* Memory Bank 7 (Virtex 2) initialization */
+#define CFG_EBC_PB7AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+ /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
+#define CFG_EBC_PB7CR 0xF509A000 /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/
+
+
+#define CFG_ETHERNET_MAC_ADDR 0x00000000 /* Pass Ethernet MAC to VxWorks */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+
+/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
new file mode 100644
index 0000000..7c161c6
--- /dev/null
+++ b/include/configs/ORSG.h
@@ -0,0 +1,298 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_405GP 1 /* This is a PPC405 CPU */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_ORSG 1 /* ...on a ORSG board */
+
+#define CONFIG_BOARD_PRE_INIT 1 /* call board_pre_init() */
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND "go fff00100"
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_PCI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_ELF | \
+ CFG_CMD_EEPROM )
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */
+#define CFG_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */
+#define CFG_BASE_BAUD 691200
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
+ 57600, 115200, 230400, 460800, 921600 }
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci adapter */
+#undef CONFIG_PCI_PNP /* no pci plug-and-play */
+ /* resource configuration */
+
+#undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0411 /* PCI Device ID: ORSG */
+#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
+#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFFD0000
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
+#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
+#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
+/*
+ * The following defines are added for buggy IOP480 byte interface.
+ * All other boards should use the standard values (CPCI405 etc.)
+ */
+#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
+#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
+#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#if 0 /* Use NVRAM for environment variables */
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
+#define CFG_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */
+#define CFG_NVRAM_SIZE (32*1024) /* NVRAM size */
+#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
+#define CFG_ENV_ADDR \
+ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env */
+#define CFG_NVRAM_VXWORKS_OFFS 0x6900 /* Offset for VxWorks eth-addr */
+
+#else /* Use EEPROM for environment variables */
+
+#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
+#define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
+#define CFG_ENV_SIZE 0x300 /* 768 bytes may be used for env vars */
+ /* total size of a CAT24WC08 is 1024 bytes */
+#endif
+
+/*-----------------------------------------------------------------------
+ * I2C EEPROM (CAT24WC08) for environment
+ */
+#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
+ /* 16 byte page write mode using*/
+ /* last 4 bits of the address */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash Bank 0) initialization */
+#define CFG_EBC_PB0AP 0x92015480
+#define CFG_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (Flash Bank 1) initialization */
+#define CFG_EBC_PB1AP 0x92015480
+#define CFG_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 2 (PLD - FPGA-boot) initialization */
+#define CFG_EBC_PB2AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+ /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
+#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 3 (PLD - OSL) initialization */
+#define CFG_EBC_PB3AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+ /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
+#define CFG_EBC_PB3CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 4 (Spartan2 1) initialization */
+#define CFG_EBC_PB4AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+ /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
+#define CFG_EBC_PB4CR 0xF209C000 /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/
+
+/* Memory Bank 5 (Spartan2 2) initialization */
+#define CFG_EBC_PB5AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+ /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
+#define CFG_EBC_PB5CR 0xF309C000 /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/
+
+/* Memory Bank 6 (Virtex 1) initialization */
+#define CFG_EBC_PB6AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+ /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
+#define CFG_EBC_PB6CR 0xF409A000 /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/
+
+/* Memory Bank 7 (Virtex 2) initialization */
+#define CFG_EBC_PB7AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+ /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
+#define CFG_EBC_PB7CR 0xF509A000 /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/
+
+
+#define CFG_ETHERNET_MAC_ADDR 0x00000000 /* Pass Ethernet MAC to VxWorks */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+
+/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/OXC.h b/include/configs/OXC.h
new file mode 100644
index 0000000..7a60e4b
--- /dev/null
+++ b/include/configs/OXC.h
@@ -0,0 +1,312 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X 1
+#define CONFIG_MPC8240 1
+#define CONFIG_OXC 1
+
+#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
+
+#define CONFIG_IDENT_STRING " [oxc] "
+
+#define CONFIG_WATCHDOG 1
+#define CONFIG_SHOW_ACTIVITY 1
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 9600
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP 1 /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00100000 /* default load address */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() on init */
+
+/*-----------------------------------------------------------------------
+ * Boot options
+ */
+
+#define CONFIG_SERVERIP 10.0.0.1
+#define CONFIG_GATEWAYIP 10.0.0.1
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_LOADADDR 0x10000
+#define CONFIG_BOOTFILE "/mnt/ide0/p2/usr/tftp/oxc.elf"
+#define CONFIG_BOOTCOMMAND "tftp 0x10000 ; bootelf 0x10000"
+#define CONFIG_BOOTDELAY 10
+
+#define CFG_OXC_GENERATE_IP 1 /* Generate IP automatically */
+#define CFG_OXC_IPMASK 0x0A000000 /* 10.0.0.x */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ */
+
+#define CONFIG_PCI /* include pci support */
+
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+
+#define CONFIG_EEPRO100 /* Ethernet Express PRO 100 */
+
+#define PCI_ENET0_IOADDR 0x80000000
+#define PCI_ENET0_MEMADDR 0x80000000
+#define PCI_ENET1_IOADDR 0x81000000
+#define PCI_ENET1_MEMADDR 0x81000000
+
+/*-----------------------------------------------------------------------
+ * FLASH
+ */
+
+#define CFG_FLASH_PRELIMBASE 0xFF800000
+#define CFG_FLASH_BASE (0-flash_info[0].size)
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 32 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/*-----------------------------------------------------------------------
+ * RAM
+ */
+
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_MAX_RAM_SIZE 0x10000000
+
+#define CFG_RESET_ADDRESS 0xFFF00100
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_LEN 0x00030000
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_PRELIMBASE)
+# define CFG_RAMBOOT 1
+#else
+# undef CFG_RAMBOOT
+#endif
+
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+
+#define CFG_GBL_DATA_SIZE 128
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
+
+#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
+
+/*-----------------------------------------------------------------------
+ * Memory mapping
+ */
+
+#define CFG_CPLD_BASE 0xff000000 /* CPLD registers */
+#define CFG_CPLD_WATCHDOG (CFG_CPLD_BASE) /* Watchdog */
+#define CFG_CPLD_RESET (CFG_CPLD_BASE + 0x040000) /* Minor resets */
+#define CFG_UART_BASE (CFG_CPLD_BASE + 0x700000) /* debug UART */
+
+/*-----------------------------------------------------------------------
+ * NS16550 Configuration
+ */
+
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE -4
+#define CFG_NS16550_CLK 1843200
+#define CFG_NS16550_COM1 CFG_UART_BASE
+
+/*-----------------------------------------------------------------------
+ * I2C Bus
+ */
+
+#define CONFIG_I2C 1 /* I2C support on ... */
+#define CONFIG_HARD_I2C 1 /* ... hardware one */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
+
+#define CFG_I2C_EXPANDER0_ADDR 0x20 /* PCF8574 expander 0 addrerr */
+#define CFG_I2C_EXPANDER1_ADDR 0x21 /* PCF8574 expander 1 addrerr */
+#define CFG_I2C_EXPANDER2_ADDR 0x26 /* PCF8574 expander 2 addrerr */
+
+/*-----------------------------------------------------------------------
+ * Environment
+ */
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0xFFF30000 /* Offset of Environment Sector */
+#define CFG_ENV_SIZE 0x00010000 /* Total Size of Environment Sector */
+#define CONFIG_ENV_OVERWRITE 1 /* Allow modifying the environment */
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2
+
+#define CFG_EUMB_ADDR 0xFC000000
+
+/* MCCR1 */
+#define CFG_ROMNAL 0 /* rom/flash next access time */
+#define CFG_ROMFAL 19 /* rom/flash access time */
+
+/* MCCR2 */
+#define CFG_ASRISE 15 /* ASRISE=15 clocks */
+#define CFG_ASFALL 3 /* ASFALL=3 clocks */
+#define CFG_REFINT 1000 /* REFINT=1000 clocks */
+
+/* MCCR3 */
+#define CFG_BSTOPRE 0x35c /* Burst To Precharge */
+#define CFG_REFREC 7 /* Refresh to activate interval */
+#define CFG_RDLAT 4 /* data latency from read command */
+
+/* MCCR4 */
+#define CFG_PRETOACT 2 /* Precharge to activate interval */
+#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
+#define CFG_ACTORW 2 /* Activate to R/W */
+#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
+#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
+#define CFG_SDMODE_BURSTLEN 3 /* SDMODE Burst length 2=4, 3=8 */
+#define CFG_REGISTERD_TYPE_BUFFER 1
+
+/* memory bank settings*/
+/*
+ * only bits 20-29 are actually used from these vales to set the
+ * start/end address the upper two bits will be 0, and the lower 20
+ * bits will be set to 0x00000 for a start address, or 0xfffff for an
+ * end address
+ */
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START 0x00000000
+#define CFG_BANK1_END 0x00000000
+#define CFG_BANK1_ENABLE 0
+#define CFG_BANK2_START 0x00000000
+#define CFG_BANK2_END 0x00000000
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x00000000
+#define CFG_BANK3_END 0x00000000
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x00000000
+#define CFG_BANK4_END 0x00000000
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x00000000
+#define CFG_BANK5_END 0x00000000
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x00000000
+#define CFG_BANK6_END 0x00000000
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x00000000
+#define CFG_BANK7_END 0x00000000
+#define CFG_BANK7_ENABLE 0
+/*
+ * Memory bank enable bitmask, specifying which of the banks defined above
+ are actually present. MSB is for bank #7, LSB is for bank #0.
+ */
+#define CFG_BANK_ENABLE 0x01
+
+#define CFG_ODCR 0xff /* configures line driver impedances, */
+ /* see 8240 book for bit definitions */
+#define CFG_PGMAX 0x32 /* how long the 8240 retains the */
+ /* currently accessed page in memory */
+ /* see 8240 book for details */
+
+/* SDRAM 0 - 256MB */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* stack in DCACHE @ 1GB (no backing mem) */
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+/* PCI memory */
+#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* Flash, config addrs, etc */
+#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
new file mode 100644
index 0000000..3f9b8d4
--- /dev/null
+++ b/include/configs/PCI405.h
@@ -0,0 +1,343 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_405GP 1 /* This is a PPC405 CPU */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_PCI405 1 /* ...on a PCI405 board */
+
+#define CONFIG_BOARD_PRE_INIT 1 /* call board_pre_init() */
+#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() on init */
+
+#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */
+
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+
+#if 0
+#define CONFIG_PREBOOT \
+ "crc32 f0207004 ffc 0;" \
+ "if cmp 0 f0207000 1;" \
+ "then;echo Old CRC is correct;crc32 f0207004 ff4 f0207000;" \
+ "else;echo Old CRC is bad;fi"
+#endif
+
+#undef CONFIG_BOOTARGS
+#if 1
+#define CONFIG_BOOTCOMMAND \
+ "bootm fffc0000"
+#else
+#define CONFIG_BOOTCOMMAND \
+ "mw.l 0 ffffffff; mw.l 4 ffffffff;" \
+ "while cmp 0 4 1; do echo Waiting for Host...;done;" \
+ "bootm 400000"
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address */
+
+#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_PCI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_ELF | \
+ CFG_CMD_DATE | \
+ CFG_CMD_I2C | \
+ CFG_CMD_EEPROM )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#define CFG_HUSH_PARSER /* use "hush" command parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
+
+#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */
+#define CFG_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */
+#define CFG_BASE_BAUD 691200
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
+ 57600, 115200, 230400, 460800, 921600 }
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci host function */
+#undef CONFIG_PCI_PNP /* no pci plug-and-play */
+ /* resource configuration */
+
+#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0407 /* PCI Device ID: PCI-405 */
+#define CFG_PCI_CLASSCODE 0x0280 /* PCI Class Code: Network/Other*/
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+
+#if 0 /* test-only */
+#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
+#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+#else
+#define CFG_PCI_PTM2LA 0xef600000 /* point to internal regs */
+#define CFG_PCI_PTM2MS 0xef600001 /* 4MB, enable */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFFD0000
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
+#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
+#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
+/*
+ * The following defines are added for buggy IOP480 byte interface.
+ * All other boards should use the standard values (CPCI405 etc.)
+ */
+#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
+#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
+#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#if 0 /* Use NVRAM for environment variables */
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
+#define CFG_ENV_SIZE 0x0ff8 /* Size of Environment vars */
+#define CFG_ENV_ADDR \
+ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-(CFG_ENV_SIZE+8)) /* Env */
+
+#else /* Use EEPROM for environment variables */
+
+#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
+#define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
+#define CFG_ENV_SIZE 0x400 /* 1024 bytes may be used for env vars*/
+ /* total size of a CAT24WC08 is 1024 bytes */
+#endif
+
+#define CFG_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */
+#define CFG_NVRAM_SIZE (32*1024) /* NVRAM size */
+
+/*-----------------------------------------------------------------------
+ * I2C EEPROM (CAT24WC16) for environment
+ */
+#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
+ /* 16 byte page write mode using*/
+ /* last 4 bits of the address */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM 0xFFE00000 /* FLASH bank #0 */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash Bank 0) initialization */
+#define CFG_EBC_PB0AP 0x92015480
+#define CFG_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (NVRAM/RTC) initialization */
+#define CFG_EBC_PB1AP 0x01005280 /* TWT=2,WBN=1,WBF=1,TH=1,SOR=1 */
+#define CFG_EBC_PB1CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 2 (CAN0, 1) initialization */
+#define CFG_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 3 (FPGA internal) initialization */
+#define CFG_EBC_PB3AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB3CR 0xF041C000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=32bit */
+#define CFG_FPGA_BASE_ADDR 0xF0400000
+
+/*-----------------------------------------------------------------------
+ * FPGA stuff
+ */
+/* FPGA internal regs */
+#define CFG_FPGA_MODE 0x00
+#define CFG_FPGA_STATUS 0x02
+#define CFG_FPGA_TS 0x04
+#define CFG_FPGA_TS_LOW 0x06
+#define CFG_FPGA_TS_CAP0 0x10
+#define CFG_FPGA_TS_CAP0_LOW 0x12
+#define CFG_FPGA_TS_CAP1 0x14
+#define CFG_FPGA_TS_CAP1_LOW 0x16
+#define CFG_FPGA_TS_CAP2 0x18
+#define CFG_FPGA_TS_CAP2_LOW 0x1a
+#define CFG_FPGA_TS_CAP3 0x1c
+#define CFG_FPGA_TS_CAP3_LOW 0x1e
+
+/* FPGA Mode Reg */
+#define CFG_FPGA_MODE_CF_RESET 0x0001
+#define CFG_FPGA_MODE_TS_IRQ_ENABLE 0x0100
+#define CFG_FPGA_MODE_TS_IRQ_CLEAR 0x1000
+#define CFG_FPGA_MODE_TS_CLEAR 0x2000
+
+/* FPGA Status Reg */
+#define CFG_FPGA_STATUS_DIP0 0x0001
+#define CFG_FPGA_STATUS_DIP1 0x0002
+#define CFG_FPGA_STATUS_DIP2 0x0004
+#define CFG_FPGA_STATUS_FLASH 0x0008
+#define CFG_FPGA_STATUS_TS_IRQ 0x1000
+
+#define CFG_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */
+#define CFG_FPGA_MAX_SIZE 32*1024 /* 32kByte is enough for XC2S15 */
+
+/* FPGA program pin configuration */
+#define CFG_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */
+#define CFG_FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */
+#define CFG_FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */
+#define CFG_FPGA_INIT 0x00400000 /* FPGA init pin (ppc input) */
+#define CFG_FPGA_DONE 0x00800000 /* FPGA done pin (ppc input) */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+#if 1 /* test-only */
+#define CFG_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */
+
+#define CFG_INIT_RAM_ADDR 0x40000000 /* use data cache */
+#else
+#define CFG_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */
+#endif
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
new file mode 100644
index 0000000..a5fc8d9
--- /dev/null
+++ b/include/configs/PIP405.h
@@ -0,0 +1,374 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/***********************************************************
+ * High Level Configuration Options
+ * (easy to change)
+ ***********************************************************/
+#define CONFIG_405GP 1 /* This is a PPC405 CPU */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_PIP405 1 /* ...on a PIP405 board */
+/***********************************************************
+ * Clock
+ ***********************************************************/
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+
+/***********************************************************
+ * Command definitions
+ ***********************************************************/
+#define CONFIG_COMMANDS \
+ (CONFIG_CMD_DFL | \
+ CFG_CMD_IDE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_PCI | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_FDC | \
+ CFG_CMD_SCSI | \
+ CFG_CMD_DATE | \
+ CFG_CMD_ELF | \
+ CFG_CMD_USB | \
+ CFG_CMD_MII | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_DOC | \
+ CFG_CMD_SAVES | \
+ CFG_CMD_BSP )
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+/**************************************************************
+ * I2C Stuff:
+ * the PIP405 is equiped with an Atmel 24C128/256 EEPROM at address
+ * 0x53.
+ * Caution: on the same bus is the SPD (Serial Presens Detect
+ * EEPROM of the SDRAM
+ * The Atmel EEPROM uses 16Bit addressing.
+ ***************************************************************/
+#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CFG_I2C_SPEED 50000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_EEPROM_ADDR 0x53
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
+#define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
+#define CFG_ENV_SIZE 0x800 /* 2 kBytes may be used for env vars */
+
+#undef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel 24C128/256 has */
+ /* 64 byte page write mode using*/
+ /* last 6 bits of the address */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE /* enable Page write */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+
+
+/***************************************************************
+ * Definitions for Serial Presence Detect EEPROM address
+ * (to get SDRAM settings)
+ ***************************************************************/
+#define SPD_EEPROM_ADDRESS 0x50
+
+#define CONFIG_BOARD_PRE_INIT
+/**************************************************************
+ * Environment definitions
+ **************************************************************/
+#define CONFIG_BAUDRATE 9600 /* STD Baudrate */
+
+
+#define CONFIG_BOOTDELAY 5
+/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
+#define CONFIG_BOOT_RETRY_TIME -10 /* feature is avaiable but not enabled */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
+
+
+#define CONFIG_BOOTCOMMAND "diskboot 200000 0:1; bootm" /* autoboot command */
+#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */
+
+#define CONFIG_IPADDR 10.0.0.100
+#define CONFIG_SERVERIP 10.0.0.1
+#define CONFIG_PREBOOT
+/***************************************************************
+ * defines if the console is stored in the environment
+ ***************************************************************/
+#define CFG_CONSOLE_IS_IN_ENV /* stdin, stdout and stderr are in evironment */
+/***************************************************************
+ * defines if an overwrite_console function exists
+ *************************************************************/
+#define CFG_CONSOLE_OVERWRITE_ROUTINE
+#define CFG_CONSOLE_INFO_QUIET
+/***************************************************************
+ * defines if the overwrite_console should be stored in the
+ * environment
+ **************************************************************/
+#undef CFG_CONSOLE_ENV_OVERWRITE
+
+/**************************************************************
+ * loads config
+ *************************************************************/
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+
+/***********************************************************
+ * Miscellaneous configurable options
+ **********************************************************/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 1 ... 12 MB in DRAM */
+
+#undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */
+#define CFG_BASE_BAUD 691200
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
+ 57600, 115200, 230400, 460800, 921600 }
+
+#define CFG_LOAD_ADDR 0x200000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host */
+#define CONFIG_PCI_PNP /* pci plug-and-play */
+ /* resource configuration */
+#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
+#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+#define CFG_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFF80000
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Init Memory Controller:
+ */
+
+#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
+
+/* Configuration Port location */
+#define CONFIG_PORT_ADDR 0xF4000000
+#define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000
+
+
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in On Chip SRAM)
+ */
+#define CFG_TEMP_STACK_OCM 1
+#define CFG_OCM_DATA_ADDR 0xF0000000
+#define CFG_OCM_DATA_SIZE 0x1000
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of On Chip SRAM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of On Chip SRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+/***********************************************************************
+ * External peripheral base address
+ ***********************************************************************/
+#define CFG_ISA_IO_BASE_ADDRESS 0xE8000000
+
+/***********************************************************************
+ * Last Stage Init
+ ***********************************************************************/
+#define CONFIG_LAST_STAGE_INIT
+/************************************************************
+ * Ethernet Stuff
+ ***********************************************************/
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 1 /* PHY address */
+#define CONFIG_CS8952_PHY 1 /* its a CS8952 PHY */
+/************************************************************
+ * RTC
+ ***********************************************************/
+#define CONFIG_RTC_MC146818
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/************************************************************
+ * IDE/ATA stuff
+ ************************************************************/
+#define CFG_IDE_MAXBUS 2 /* max. 2 IDE busses */
+#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+
+#define CFG_ATA_BASE_ADDR CFG_ISA_IO_BASE_ADDRESS /* base address */
+#define CFG_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */
+#define CFG_ATA_IDE1_OFFSET 0x0170 /* ide1 offset */
+#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */
+#define CFG_ATA_REG_OFFSET 0 /* reg offset */
+#define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */
+
+#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
+#undef CONFIG_IDE_LED /* no led for ide supported */
+#define CONFIG_IDE_RESET /* reset for ide supported... */
+#define CONFIG_IDE_RESET_ROUTINE /* with a special reset function */
+
+/************************************************************
+ * ATAPI support (experimental)
+ ************************************************************/
+#define CONFIG_ATAPI /* enable ATAPI Support */
+
+/************************************************************
+ * SCSI support (experimental) only SYM53C8xx supported
+ ************************************************************/
+#define CONFIG_SCSI_SYM53C8XX
+#define CFG_SCSI_MAX_LUN 8 /* number of supported LUNs */
+#define CFG_SCSI_MAX_SCSI_ID 7 /* maximum SCSI ID (0..6) */
+#define CFG_SCSI_MAX_DEVICE CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN /* maximum Target devices */
+#define CFG_SCSI_SPIN_UP_TIME 2
+
+/************************************************************
+ * Disk-On-Chip configuration
+ ************************************************************/
+#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */
+#define CFG_DOC_SHORT_TIMEOUT
+#define CFG_DOC_SUPPORT_2000
+#define CFG_DOC_SUPPORT_MILLENNIUM
+
+/************************************************************
+ * DISK Partition support
+ ************************************************************/
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION /* Experimental */
+
+/************************************************************
+ * Keyboard support
+ ************************************************************/
+#define CONFIG_ISA_KEYBOARD
+
+/************************************************************
+ * Video support
+ ************************************************************/
+#define CONFIG_VIDEO /*To enable video controller support */
+#define CONFIG_VIDEO_CT69000
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VIDEO_ONBOARD /* Video controller is on-board */
+
+/************************************************************
+ * USB support
+ ************************************************************/
+#define CONFIG_USB_UHCI
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_USB_STORAGE
+
+/* Enable needed helper functions */
+#define CFG_DEVICE_DEREGISTER /* needs device_deregister */
+
+/************************************************************
+ * Debug support
+ ************************************************************/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/************************************************************
+ * Ident
+ ************************************************************/
+#define VERSION_TAG "released"
+#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, MEV-10066-001 " VERSION_TAG
+
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
new file mode 100644
index 0000000..0750116
--- /dev/null
+++ b/include/configs/PN62.h
@@ -0,0 +1,301 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X 1
+#define CONFIG_MPC8240 1
+#define CONFIG_PN62 1
+
+#define CONFIG_CONS_INDEX 1
+
+
+#define REMOVE_COMMANDS ( CFG_CMD_AUTOSCRIPT | \
+ CFG_CMD_LOADS | \
+ CFG_CMD_ENV | \
+ CFG_CMD_FLASH )
+
+#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~REMOVE_COMMANDS) |\
+ CFG_CMD_PCI |\
+ CFG_CMD_BSP)
+
+#define CONFIG_BAUDRATE 19200 /* console baudrate */
+
+#define CONFIG_BOOTDELAY 1 /* autoboot after n seconds */
+
+#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
+
+#define CONFIG_SERVERIP 10.0.0.201
+#define CONFIG_IPADDR 10.0.0.200
+#define CONFIG_ROOTPATH /opt/eldk/ppc_82xx
+#define CONFIG_NETMASK 255.255.255.0
+#undef CONFIG_BOOTARGS
+#if 0
+/* Boot Linux with NFS root filesystem */
+#define CONFIG_BOOTCOMMAND \
+ "setenv verify y;" \
+ "setenv bootargs console=ttyS0,19200 mem=31M quiet " \
+ "root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip)::$(netmask):pn62:eth0:off;" \
+ "loadp 100000; bootm"
+ /* "tftpboot 100000 pImage; bootm" */
+#else
+/* Boot Linux with RAMdisk based filesystem (initrd, BusyBox) */
+#define CONFIG_BOOTCOMMAND \
+ "setenv verify n;" \
+ "setenv bootargs console=ttyS0,19200 mem=31M quiet " \
+ "root=/dev/ram rw " \
+ "ip=$(ipaddr):$(serverip)::$(netmask):pn62:eth0:off;" \
+ "loadp 200000; bootm"
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP 1 /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00100000 /* default load address */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_PRAM 1024 /* reserve 1 MB protected RAM */
+
+#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() on init */
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */
+
+/*
+ * PCI stuff
+ */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* we need Plug 'n Play */
+#if 0
+#define CONFIG_PCI_SCAN_SHOW /* show PCI auto-scan at boot */
+#endif
+
+/*
+ * Networking stuff
+ */
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+
+#define CONFIG_PCNET /* there are 2 AMD PCnet 79C973 */
+#define CONFIG_PCNET_79C973
+
+#define _IO_BASE 0xfe000000 /* points to PCI I/O space */
+
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_MAX_RAM_SIZE 0x10000000
+
+#define CFG_RESET_ADDRESS 0xfff00100
+
+#undef CFG_RAMBOOT
+#define CFG_MONITOR_LEN 0x00030000
+#define CFG_MONITOR_BASE TEXT_BASE
+
+/*#define CFG_GBL_DATA_SIZE 256*/
+#define CFG_GBL_DATA_SIZE 128
+
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+
+#define CFG_NO_FLASH 1 /* There is no FLASH memory */
+
+#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+#define CFG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */
+#define CFG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */
+
+#define CFG_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
+
+#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
+#define CFG_MEMTEST_END 0x01f00000 /* 0 ... 32 MB in DRAM */
+
+/*
+ * Serial port configuration
+ */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE 1
+
+#define CFG_NS16550_CLK 1843200
+
+#define CFG_NS16550_COM1 0xff800008
+#define CFG_NS16550_COM2 0xff800000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3
+
+#define CFG_EUMB_ADDR 0xFCE00000
+
+/* MCCR1 */
+#define CFG_ROMNAL 3 /* rom/flash next access time */
+#define CFG_ROMFAL 7 /* rom/flash access time */
+
+/* MCCR2 */
+#define CFG_ASRISE 6 /* ASRISE in clocks */
+#define CFG_ASFALL 12 /* ASFALL in clocks */
+#define CFG_REFINT 5600 /* REFINT in clocks */
+
+/* MCCR3 */
+#define CFG_BSTOPRE 0x3cf /* Burst To Precharge */
+#define CFG_REFREC 2 /* Refresh to activate interval */
+#define CFG_RDLAT 3 /* data latency from read command */
+
+/* MCCR4 */
+#define CFG_PRETOACT 1 /* Precharge to activate interval */
+#define CFG_ACTTOPRE 3 /* Activate to Precharge interval */
+#define CFG_ACTORW 2 /* Activate to R/W */
+#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latency */
+#define CFG_SDMODE_WRAP 0 /* SDMODE Wrap type */
+#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */
+#define CFG_REGISTERD_TYPE_BUFFER 1
+
+/* Memory bank settings:
+ *
+ * only bits 20-29 are actually used from these vales to set the
+ * start/qend address the upper two bits will be 0, and the lower 20
+ * bits will be set to 0x00000 for a start address, or 0xfffff for an
+ * end address
+ */
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START 0x00000000
+#define CFG_BANK1_END 0x00000000
+#define CFG_BANK1_ENABLE 0
+#define CFG_BANK2_START 0x00000000
+#define CFG_BANK2_END 0x00000000
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x00000000
+#define CFG_BANK3_END 0x00000000
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x00000000
+#define CFG_BANK4_END 0x00000000
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x00000000
+#define CFG_BANK5_END 0x00000000
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x00000000
+#define CFG_BANK6_END 0x00000000
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x00000000
+#define CFG_BANK7_END 0x00000000
+#define CFG_BANK7_ENABLE 0
+
+/*
+ * Memory bank enable bitmask, specifying which of the banks defined above
+ * are actually present. MSB is for bank #7, LSB is for bank #0.
+ */
+#define CFG_BANK_ENABLE 0x01
+
+#define CFG_ODCR 0xff /* configures line driver impedances, */
+ /* see 8240 book for bit definitions */
+#define CFG_PGMAX 0x32 /* how long the 8240 retains the */
+ /* currently accessed page in memory */
+ /* see 8240 book for details */
+
+/* SDRAM 0 - 256MB */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+/* PCI memory space */
+#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* Config addrs, etc */
+#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
new file mode 100644
index 0000000..0bef321
--- /dev/null
+++ b/include/configs/Sandpoint8240.h
@@ -0,0 +1,377 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X 1
+#define CONFIG_MPC8240 1
+#define CONFIG_SANDPOINT 1
+
+#if 0
+#define USE_DINK32 1
+#else
+#undef USE_DINK32
+#endif
+
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_DRAM_SPEED 100 /* MHz */
+
+#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~CFG_CMD_AUTOSCRIPT) | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_PCI )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP 1 /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00100000 /* default load address */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP
+
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+
+#define CONFIG_EEPRO100
+
+#define PCI_ENET0_IOADDR 0x80000000
+#define PCI_ENET0_MEMADDR 0x80000000
+#define PCI_ENET1_IOADDR 0x81000000
+#define PCI_ENET1_MEMADDR 0x81000000
+
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_MAX_RAM_SIZE 0x10000000
+
+#define CFG_RESET_ADDRESS 0xFFF00100
+
+#if defined (USE_DINK32)
+#define CFG_MONITOR_LEN 0x00030000
+#define CFG_MONITOR_BASE 0x00090000
+#define CFG_RAMBOOT 1
+#define CFG_INIT_RAM_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_INIT_RAM_END 0x10000
+#define CFG_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#else
+#undef CFG_RAMBOOT
+#define CFG_MONITOR_LEN 0x00030000
+#define CFG_MONITOR_BASE TEXT_BASE
+
+/*#define CFG_GBL_DATA_SIZE 256*/
+#define CFG_GBL_DATA_SIZE 128
+
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+#endif
+
+#define CFG_FLASH_BASE 0xFFF00000
+#if 0
+#define CFG_FLASH_SIZE (512 * 1024) /* sandpoint has tiny eeprom */
+#else
+#define CFG_FLASH_SIZE (1024 * 1024) /* Unity has onboard 1MByte flash */
+#endif
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */
+#define CFG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */
+
+#define CFG_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
+
+#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
+
+#define CFG_EUMB_ADDR 0xFC000000
+
+#define CFG_ISA_MEM 0xFD000000
+#define CFG_ISA_IO 0xFE000000
+
+#define CFG_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */
+#define CFG_FLASH_RANGE_SIZE 0x01000000
+#define FLASH_BASE0_PRELIM 0xFFF00000 /* sandpoint flash */
+#define FLASH_BASE1_PRELIM 0xFF000000 /* PMC onboard flash */
+
+/*
+ * select i2c support configuration
+ *
+ * Supported configurations are {none, software, hardware} drivers.
+ * If the software driver is chosen, there are some additional
+ * configuration items that the driver uses to drive the port pins.
+ */
+#define CONFIG_HARD_I2C 1 /* To enable I2C support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#ifdef CONFIG_SOFT_I2C
+#error "Soft I2C is not configured properly. Please review!"
+#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
+#define I2C_ACTIVE (iop->pdir |= 0x00010000)
+#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
+#define I2C_READ ((iop->pdat & 0x00010000) != 0)
+#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
+ else iop->pdat &= ~0x00010000
+#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
+ else iop->pdat &= ~0x00020000
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+#endif /* CONFIG_SOFT_I2C */
+
+
+#define CFG_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* write page size */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */
+
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CFG_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+
+
+#define CFG_WINBOND_83C553 1 /*has a winbond bridge */
+#define CFG_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */
+#define CFG_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */
+#define CFG_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */
+
+#define CFG_IDE_MAXBUS 2 /* max. 2 IDE busses */
+#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+
+/*
+ * NS87308 Configuration
+ */
+#define CFG_NS87308 /* Nat Semi super-io controller on ISA bus */
+
+#define CFG_NS87308_BADDR_10 1
+
+#define CFG_NS87308_DEVS ( CFG_NS87308_UART1 | \
+ CFG_NS87308_UART2 | \
+ CFG_NS87308_POWRMAN | \
+ CFG_NS87308_RTC_APC )
+
+#undef CFG_NS87308_PS2MOD
+
+#define CFG_NS87308_CS0_BASE 0x0076
+#define CFG_NS87308_CS0_CONF 0x30
+#define CFG_NS87308_CS1_BASE 0x0075
+#define CFG_NS87308_CS1_CONF 0x30
+#define CFG_NS87308_CS2_BASE 0x0074
+#define CFG_NS87308_CS2_CONF 0x30
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE 1
+
+#define CFG_NS16550_CLK 1843200
+
+#define CFG_NS16550_COM1 (CFG_ISA_IO + CFG_NS87308_UART1_BASE)
+#define CFG_NS16550_COM2 (CFG_ISA_IO + CFG_NS87308_UART2_BASE)
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2
+
+#define CFG_ROMNAL 7 /*rom/flash next access time */
+#define CFG_ROMFAL 11 /*rom/flash access time */
+
+#define CFG_REFINT 430 /* no of clock cycles between CBR refresh cycles */
+
+/* the following are for SDRAM only*/
+#define CFG_BSTOPRE 121 /* Burst To Precharge, sets open page interval */
+#define CFG_REFREC 8 /* Refresh to activate interval */
+#define CFG_RDLAT 4 /* data latency from read command */
+#define CFG_PRETOACT 3 /* Precharge to activate interval */
+#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
+#define CFG_ACTORW 3 /* Activate to R/W */
+#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
+#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
+#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */
+
+#define CFG_REGISTERD_TYPE_BUFFER 1
+
+/* memory bank settings*/
+/*
+ * only bits 20-29 are actually used from these vales to set the
+ * start/end address the upper two bits will be 0, and the lower 20
+ * bits will be set to 0x00000 for a start address, or 0xfffff for an
+ * end address
+ */
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START 0x3ff00000
+#define CFG_BANK1_END 0x3fffffff
+#define CFG_BANK1_ENABLE 0
+#define CFG_BANK2_START 0x3ff00000
+#define CFG_BANK2_END 0x3fffffff
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x3ff00000
+#define CFG_BANK3_END 0x3fffffff
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x00000000
+#define CFG_BANK4_END 0x00000000
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x00000000
+#define CFG_BANK5_END 0x00000000
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x00000000
+#define CFG_BANK6_END 0x00000000
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x00000000
+#define CFG_BANK7_END 0x00000000
+#define CFG_BANK7_ENABLE 0
+/*
+ * Memory bank enable bitmask, specifying which of the banks defined above
+ are actually present. MSB is for bank #7, LSB is for bank #0.
+ */
+#define CFG_BANK_ENABLE 0x01
+
+#define CFG_ODCR 0xff /* configures line driver impedances, */
+ /* see 8240 book for bit definitions */
+#define CFG_PGMAX 0x32 /* how long the 8240 retains the */
+ /* currently accessed page in memory */
+ /* see 8240 book for details */
+
+/* SDRAM 0 - 256MB */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* stack in DCACHE @ 1GB (no backing mem) */
+#if defined(USE_DINK32)
+#define CFG_IBAT1L (0x40000000 | BATL_PP_00 )
+#define CFG_IBAT1U (0x40000000 | BATU_BL_128K )
+#else
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#endif
+
+/* PCI memory */
+#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* Flash, config addrs, etc */
+#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 20 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+/* values according to the manual */
+
+#define CONFIG_DRAM_50MHZ 1
+#define CONFIG_SDRAM_50MHZ
+
+#undef NR_8259_INTS
+#define NR_8259_INTS 1
+
+
+#define CONFIG_DISK_SPINUP_TIME 1000000
+
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
new file mode 100644
index 0000000..aa45675
--- /dev/null
+++ b/include/configs/Sandpoint8245.h
@@ -0,0 +1,382 @@
+/*
+ * (C) Copyright 2001, 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X 1
+#define CONFIG_MPC8245 1
+#define CONFIG_SANDPOINT 1
+
+#if 0
+#define USE_DINK32 1
+#else
+#undef USE_DINK32
+#endif
+
+#define CONFIG_CONS_INDEX 3 /* set to '3' for on-chip DUART */
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_DRAM_SPEED 100 /* MHz */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_PCI )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP 1 /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00100000 /* default load address */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP
+
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+
+#define CONFIG_EEPRO100
+#define CONFIG_NATSEMI
+#define CONFIG_NS8382X
+
+#define PCI_ENET0_IOADDR 0x80000000
+#define PCI_ENET0_MEMADDR 0x80000000
+#define PCI_ENET1_IOADDR 0x81000000
+#define PCI_ENET1_MEMADDR 0x81000000
+
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_MAX_RAM_SIZE 0x10000000
+
+#define CFG_RESET_ADDRESS 0xFFF00100
+
+#if defined (USE_DINK32)
+#define CFG_MONITOR_LEN 0x00030000
+#define CFG_MONITOR_BASE 0x00090000
+#define CFG_RAMBOOT 1
+#define CFG_INIT_RAM_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_INIT_RAM_END 0x10000
+#define CFG_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#else
+#undef CFG_RAMBOOT
+#define CFG_MONITOR_LEN 0x00030000
+#define CFG_MONITOR_BASE TEXT_BASE
+
+/*#define CFG_GBL_DATA_SIZE 256*/
+#define CFG_GBL_DATA_SIZE 128
+
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+#endif
+
+#define CFG_FLASH_BASE 0xFFF00000
+#if 0
+#define CFG_FLASH_SIZE (512 * 1024) /* sandpoint has tiny eeprom */
+#else
+#define CFG_FLASH_SIZE (1024 * 1024) /* Unity has onboard 1MByte flash */
+#endif
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */
+#define CFG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */
+
+#define CFG_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
+
+#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
+
+#define CFG_EUMB_ADDR 0xFC000000
+
+#define CFG_ISA_MEM 0xFD000000
+#define CFG_ISA_IO 0xFE000000
+
+#define CFG_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */
+#define CFG_FLASH_RANGE_SIZE 0x01000000
+#define FLASH_BASE0_PRELIM 0xFFF00000 /* sandpoint flash */
+#define FLASH_BASE1_PRELIM 0xFF000000 /* PMC onboard flash */
+
+/*
+ * select i2c support configuration
+ *
+ * Supported configurations are {none, software, hardware} drivers.
+ * If the software driver is chosen, there are some additional
+ * configuration items that the driver uses to drive the port pins.
+ */
+#define CONFIG_HARD_I2C 1 /* To enable I2C support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#ifdef CONFIG_SOFT_I2C
+#error "Soft I2C is not configured properly. Please review!"
+#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
+#define I2C_ACTIVE (iop->pdir |= 0x00010000)
+#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
+#define I2C_READ ((iop->pdat & 0x00010000) != 0)
+#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
+ else iop->pdat &= ~0x00010000
+#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
+ else iop->pdat &= ~0x00020000
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+#endif /* CONFIG_SOFT_I2C */
+
+#define CFG_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CFG_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+
+
+#define CFG_WINBOND_83C553 1 /*has a winbond bridge */
+#define CFG_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */
+#define CFG_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */
+#define CFG_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */
+
+#define CFG_IDE_MAXBUS 2 /* max. 2 IDE busses */
+#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+
+/*
+ * NS87308 Configuration
+ */
+#define CFG_NS87308 /* Nat Semi super-io controller on ISA bus */
+
+#define CFG_NS87308_BADDR_10 1
+
+#define CFG_NS87308_DEVS ( CFG_NS87308_UART1 | \
+ CFG_NS87308_UART2 | \
+ CFG_NS87308_POWRMAN | \
+ CFG_NS87308_RTC_APC )
+
+#undef CFG_NS87308_PS2MOD
+
+#define CFG_NS87308_CS0_BASE 0x0076
+#define CFG_NS87308_CS0_CONF 0x30
+#define CFG_NS87308_CS1_BASE 0x0075
+#define CFG_NS87308_CS1_CONF 0x30
+#define CFG_NS87308_CS2_BASE 0x0074
+#define CFG_NS87308_CS2_CONF 0x30
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE 1
+
+#define CFG_NS16550_CLK 1843200
+
+#define CFG_NS16550_COM1 (CFG_ISA_IO + CFG_NS87308_UART1_BASE)
+#define CFG_NS16550_COM2 (CFG_ISA_IO + CFG_NS87308_UART2_BASE)
+#define CFG_NS16550_COM3 (CFG_EUMB_ADDR + 0x4500)
+#define CFG_NS16550_COM4 (CFG_EUMB_ADDR + 0x4600)
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+
+#define CFG_ROMNAL 7 /*rom/flash next access time */
+#define CFG_ROMFAL 11 /*rom/flash access time */
+
+#define CFG_REFINT 430 /* no of clock cycles between CBR refresh cycles */
+
+/* the following are for SDRAM only*/
+#define CFG_BSTOPRE 121 /* Burst To Precharge, sets open page interval */
+#define CFG_REFREC 8 /* Refresh to activate interval */
+#define CFG_RDLAT 4 /* data latency from read command */
+#define CFG_PRETOACT 3 /* Precharge to activate interval */
+#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
+#define CFG_ACTORW 3 /* Activate to R/W */
+#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
+#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
+#if 0
+#define CFG_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */
+#endif
+
+#define CFG_REGISTERD_TYPE_BUFFER 1
+#define CFG_EXTROM 1
+#define CFG_REGDIMM 0
+
+
+/* memory bank settings*/
+/*
+ * only bits 20-29 are actually used from these vales to set the
+ * start/end address the upper two bits will be 0, and the lower 20
+ * bits will be set to 0x00000 for a start address, or 0xfffff for an
+ * end address
+ */
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START 0x3ff00000
+#define CFG_BANK1_END 0x3fffffff
+#define CFG_BANK1_ENABLE 0
+#define CFG_BANK2_START 0x3ff00000
+#define CFG_BANK2_END 0x3fffffff
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x3ff00000
+#define CFG_BANK3_END 0x3fffffff
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x00000000
+#define CFG_BANK4_END 0x00000000
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x00000000
+#define CFG_BANK5_END 0x00000000
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x00000000
+#define CFG_BANK6_END 0x00000000
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x00000000
+#define CFG_BANK7_END 0x00000000
+#define CFG_BANK7_ENABLE 0
+/*
+ * Memory bank enable bitmask, specifying which of the banks defined above
+ are actually present. MSB is for bank #7, LSB is for bank #0.
+ */
+#define CFG_BANK_ENABLE 0x01
+
+#define CFG_ODCR 0xff /* configures line driver impedances, */
+ /* see 8240 book for bit definitions */
+#define CFG_PGMAX 0x32 /* how long the 8240 retains the */
+ /* currently accessed page in memory */
+ /* see 8240 book for details */
+
+/* SDRAM 0 - 256MB */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* stack in DCACHE @ 1GB (no backing mem) */
+#if defined(USE_DINK32)
+#define CFG_IBAT1L (0x40000000 | BATL_PP_00 )
+#define CFG_IBAT1U (0x40000000 | BATU_BL_128K )
+#else
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#endif
+
+/* PCI memory */
+#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* Flash, config addrs, etc */
+#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 20 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+/* values according to the manual */
+
+#define CONFIG_DRAM_50MHZ 1
+#define CONFIG_SDRAM_50MHZ
+
+#undef NR_8259_INTS
+#define NR_8259_INTS 1
+
+
+#define CONFIG_DISK_SPINUP_TIME 1000000
+
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h
new file mode 100644
index 0000000..4978f7e
--- /dev/null
+++ b/include/configs/ZUMA.h
@@ -0,0 +1,380 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/processor.h>
+
+#define CFG_GT_6426x GT_64260 /* with a 64260 system controller */
+#define CONFIG_ETHER_PORT_MII /* use two MII ports */
+#define CONFIG_INTEL_LXT97X /* Intel LXT97X phy */
+
+#ifndef __ASSEMBLY__
+#include <galileo/core.h>
+#endif
+
+#include "../board/evb64260/local.h"
+
+#define CONFIG_EVB64260 1 /* this is an EVB64260 board */
+#define CONFIG_ZUMA_V2 1 /* always define this for ZUMA v2 */
+
+/* #define CONFIG_ZUMA_V2_OLD 1 */ /* backwards compat for old V2 board */
+
+#define CONFIG_BAUDRATE 38400 /* console baudrate = 38400 */
+
+#define CONFIG_ECC /* enable ECC support */
+
+#define CONFIG_750CX /* we have a 750CX/CXe (override local.h) */
+
+/* which initialization functions to call for this board */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_BOARD_PRE_INIT
+#define CFG_BOARD_ASM_INIT
+
+#define CFG_BOARD_NAME "Zuma APv2"
+
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+/*
+ * The following defines let you select what serial you want to use
+ * for your console driver.
+ *
+ * what to do:
+ * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial
+ * cable onto the second DUART channel, change the CFG_DUART port from 1
+ * to 0 below.
+ *
+ * to use the MPSC, #define CONFIG_MPSC. If you have wired up another
+ * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
+ */
+#define CONFIG_MPSC
+
+#define CONFIG_MPSC_PORT 0
+
+#define CONFIG_NET_MULTI /* attempt all available adapters */
+
+/* define this if you want to enable GT MAC filtering */
+#define CONFIG_GT_USE_MAC_HASH_TABLE
+
+#if 1
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_BOOTCOMMAND \
+ "tftpboot && " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:" \
+ "$netmask:$hostname:eth0:none panic=5 && bootm"
+
+#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
+#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+#undef CONFIG_ALTIVEC /* undef to disable */
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
+ CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_MII /* enable MII commands */
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_BSP | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_MII | \
+ CFG_CMD_DATE)
+
+/* Flash banks JFFS2 should use */
+#define CFG_JFFS2_FIRST_BANK 1
+#define CFG_JFFS2_NUM_BANKS 2
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x00300000 /* default load address */
+
+#define CFG_HZ 1000 /* decr freq: 1ms ticks */
+
+#define CFG_BUS_HZ 133000000 /* 133 MHz */
+
+#define CFG_BUS_CLK CFG_BUS_HZ
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_RAM_LOCK
+
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xfff00000
+#define CFG_RESET_ADDRESS 0xfff00100
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
+
+/* areas to map different things with the GT in physical space */
+#define CFG_DRAM_BANKS 4
+#define CFG_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */
+
+/* What to put in the bats. */
+#define CFG_MISC_REGION_BASE 0xf0000000
+
+/* Peripheral Device section */
+#define CFG_GT_REGS 0xf8000000 /* later mapped GT_REGS */
+#define CFG_DEV_BASE 0xf0000000
+#define CFG_DEV0_SIZE _64M /* zuma flash @ 0xf000.0000*/
+#define CFG_DEV1_SIZE _8M /* zuma IDE @ 0xf400.0000 */
+#define CFG_DEV2_SIZE _8M /* unused */
+#define CFG_DEV3_SIZE _8M /* unused */
+
+#define CFG_DEV0_PAR 0xc498243c
+ /* c 4 9 8 2 4 3 c */
+ /* 33 22|2222|22 22|111 1|11 11|1 1 | | */
+ /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
+ /* 11|00|0100|10 01|100|0 00|10 0|100 0|011 1|100 */
+ /* 3| 0|.... ..| 1| 4 | 0 | 4 | 8 | 7 | 4 */
+
+#define CFG_DEV1_PAR 0xc01b6ac5
+ /* c 0 1 b 6 a c 5 */
+ /* 33 22|2222|22 22|111 1|11 11|1 1 | | */
+ /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
+ /* 11|00|0000|00 01|101|1 01|10 1|010 1|100 0|101 */
+ /* 3| 0|.... ..| 1| 5 | 5 | 5 | 5 | 8 | 5 */
+
+
+
+#define CFG_8BIT_BOOT_PAR 0xc00b5e7c
+
+#define CFG_MPP_CONTROL_0 0x00007777 /* GPP[7:4] : REQ0[1:0] GNT0[1:0] */
+#define CFG_MPP_CONTROL_1 0x00000000 /* GPP[15:12] : GPP[11:8] */
+#define CFG_MPP_CONTROL_2 0x00008888 /* GPP[23:20] : REQ1[1:0] GNT1[1:0] */
+#define CFG_MPP_CONTROL_3 0x00000000 /* GPP[31:28] (int[3:0]) */
+ /* GPP[27:24] (27 is int4, rest are GPP) */
+
+#define CFG_SERIAL_PORT_MUX 0x00001101 /* 11=MPSC1/MPSC0 01=ETH, 0=only MII */
+#define CFG_GPP_LEVEL_CONTROL 0xf8000000 /* interrupt inputs: GPP[31:27] */
+
+#define CFG_SDRAM_CONFIG 0xe4e18200 /* 0x448 */
+ /* idmas use buffer 1,1
+ comm use buffer 1
+ pci use buffer 0,0 (pci1->0 pci0->0)
+ cpu use buffer 1 (R*18)
+ normal load (see also ifdef HVL)
+ standard SDRAM (see also ifdef REG)
+ non staggered refresh */
+ /* 31:26 25 23 20 19 18 16 */
+ /* 111001 00 111 0 0 00 1 */
+
+ /* refresh count=0x200
+ phy interleave disable (by default,
+ set later by dram config..)
+ virt interleave enable */
+ /* 15 14 13:0 */
+ /* 1 0 0x200 */
+
+#define CFG_DEV0_SPACE CFG_DEV_BASE
+#define CFG_DEV1_SPACE (CFG_DEV0_SPACE + CFG_DEV0_SIZE)
+#define CFG_DEV2_SPACE (CFG_DEV1_SPACE + CFG_DEV1_SIZE)
+#define CFG_DEV3_SPACE (CFG_DEV2_SPACE + CFG_DEV2_SIZE)
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ */
+
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+/* PCI MEMORY MAP section */
+#define CFG_PCI0_MEM_BASE 0x80000000
+#define CFG_PCI0_MEM_SIZE _128M
+#define CFG_PCI1_MEM_BASE 0x88000000
+#define CFG_PCI1_MEM_SIZE _128M
+
+#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE)
+#define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE)
+
+/* PCI I/O MAP section */
+#define CFG_PCI0_IO_BASE 0xfa000000
+#define CFG_PCI0_IO_SIZE _16M
+#define CFG_PCI1_IO_BASE 0xfb000000
+#define CFG_PCI1_IO_SIZE _16M
+
+#define CFG_PCI0_IO_SPACE (CFG_PCI0_IO_BASE)
+#define CFG_PCI0_IO_SPACE_PCI 0x00000000
+#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE)
+#define CFG_PCI1_IO_SPACE_PCI 0x00000000
+
+
+/*----------------------------------------------------------------------
+ * Initial BAT mappings
+ */
+
+/* NOTES:
+ * 1) GUARDED and WRITE_THRU not allowed in IBATS
+ * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
+ */
+
+/* SDRAM */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT0U CFG_IBAT0U
+
+/* init ram */
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+
+/* PCI0, PCI1 memory space (starting at PCI0 base, mapped in one BAT) */
+#define CFG_IBAT2L BATL_NO_ACCESS
+#define CFG_IBAT2U CFG_DBAT2U
+#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* GT regs, bootrom, all the devices, PCI I/O */
+#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
+#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
+#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
+
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 130 /* max number of sectors on one chip */
+
+#define CFG_EXTRA_FLASH_DEVICE DEVICE0 /* extra flash at device 0 */
+#define CFG_EXTRA_FLASH_WIDTH 2 /* 16 bit */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_CFI 1
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sect real size */
+#define CFG_ENV_ADDR (0xfff80000 - CFG_ENV_SECT_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * L2CR setup -- make sure this is right for your board!
+ * look in include/mpc74xx.h for the defines used here
+ */
+
+#define CFG_L2
+
+#ifdef CONFIG_750CX
+#define L2_INIT 0
+#else
+#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
+ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
+#endif
+
+#define L2_ENABLE (L2_INIT | L2CR_L2E)
+
+/*------------------------------------------------------------------------
+ * Real time clock
+ */
+#define CONFIG_RTC_DS1302
+
+
+/*------------------------------------------------------------------------
+ * Galileo I2C driver
+ */
+#define CONFIG_GT_I2C
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/shannon.h b/include/configs/shannon.h
new file mode 100644
index 0000000..c281707
--- /dev/null
+++ b/include/configs/shannon.h
@@ -0,0 +1,218 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * Configuation settings for the Shannon/TuxScreen/IS2630 WebPhone Board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+
+/*
+ * we just run in non-critical mode now, because we use the Inferno-Loader to
+ * bring us to live
+ */
+#define CONFIG_INFERNO /* we are using the inferno bootldr */
+#undef CONFIG_INIT_CRITICAL /* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_SA1100 1 /* This is an SA1100 CPU */
+#define CONFIG_SHANNON 1 /* on an SHANNON/TuxScreen Board */
+
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024)
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_3C589 1
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL3 1 /* we use SERIAL 3 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 115200
+
+#if 0 /* XXX - cannot test IDE anyway, so disabled for now - wd */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_PCMCIA | \
+ CFG_CMD_IDE)
+#endif /* 0 */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200"
+#define CONFIG_NETMASK 255.255.0.0
+#define CONFIG_BOOTCOMMAND "help"
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "TuxScreen # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0xc0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0xd0000000 /* default load address */
+
+#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED 0x09 /* 190 MHz for Shannon */
+
+ /* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_DOS_PARTITION 1 /* DOS partitiion support */
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+/* BE CAREFUL */
+#define CONFIG_NR_DRAM_BANKS 4 /* we have 4 banks of EDORAM */
+#define PHYS_SDRAM_1 0xc0000000 /* RAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x00400000 /* 4 MB */
+#define PHYS_SDRAM_2 0xc8000000 /* RAM Bank #2 */
+#define PHYS_SDRAM_2_SIZE 0x00400000 /* 4 MB */
+#define PHYS_SDRAM_3 0xd0000000 /* RAM Bank #3 */
+#define PHYS_SDRAM_3_SIZE 0x00400000 /* 4 MB */
+#define PHYS_SDRAM_4 0xd8000000 /* RAM Bank #4 */
+#define PHYS_SDRAM_4_SIZE 0x00400000 /* 4 MB */
+
+
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT (31+4) /* max number of sectors on one chip */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
+
+#define CFG_ENV_IS_IN_FLASH 1
+#ifdef CONFIG_INFERNO
+/* we take the last sector, 128 KB in size, but we only use 4 KB of it for stack reasons */
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x003E0000) /* Addr of Environment Sector */
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+#else
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+#endif
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ *
+ */
+
+/* we pick the upper one */
+
+#define CONFIG_PCMCIA_SLOT_A
+
+#define CFG_PCMCIA_IO_ADDR (0x20000000)
+#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR (0x24000000)
+#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR (0x2C000000)
+#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_MEM_ADDR (0x28000000)
+#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
+
+/* in fact, MEM and ATTRB are swapped - has to be corrected soon in cmd_pcmcia or so */
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_PCCARD 1 /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_RESET /* reset for ide not supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+/* it's simple, all regs are in I/O space */
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_ATTRB_ADDR
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (CFG_ATA_BASE_ADDR)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (CFG_ATA_BASE_ADDR)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (CFG_ATA_BASE_ADDR)
+
+/*-----------------------------------------------------------------------
+ */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/trab.h b/include/configs/trab.h
new file mode 100644
index 0000000..7096767
--- /dev/null
+++ b/include/configs/trab.h
@@ -0,0 +1,243 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn <gj@denx.de>
+ *
+ * Configuation settings for the TRAB board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM920T 1 /* This is an arm920t CPU */
+#define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */
+#define CONFIG_TRAB 1 /* on a TRAB Board */
+#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */
+
+/* input clock of PLL */
+#define CONFIG_PLL_INPUT_FREQ 12000000 /* TRAB has 12 MHz input clock */
+
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024)
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
+#define CS8900_BASE 0x07000300 /* agrees with WIN CE PA */
+#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
+
+#define CONFIG_VFD 1 /* VFD linear frame buffer driver */
+#define VFD_TEST_LOGO 1 /* output a test logo to the VFDs */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on TRAB */
+
+#define CONFIG_HWFLOW /* include RTS/CTS flow control support */
+
+#define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */
+
+#define CONFIG_MODEM_KEY_MAGIC "23" /* hold down these keys to enable modem */
+
+/*
+ * The following enables modem debugging stuff. The dbg() and
+ * 'char screen[1024]' are used for debug printfs. Unfortunately,
+ * it is usable only from BDI
+ */
+#undef CONFIG_MODEM_SUPPORT_DEBUG
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
+
+#ifdef CONFIG_HWFLOW
+#define CONFIG_COMMANDS_ADD_HWFLOW CFG_CMD_HWFLOW
+#else
+#define CONFIG_COMMANDS_ADD_HWFLOW 0
+#endif
+
+#ifdef CONFIG_VFD
+#define CONFIG_COMMANDS_ADD_VFD CFG_CMD_VFD
+#else
+#define CONFIG_COMMANDS_ADD_VFD 0
+#endif
+
+#ifndef USE_920T_MMU
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
+ CFG_CMD_BSP | \
+ CONFIG_COMMANDS_ADD_HWFLOW | \
+ CONFIG_COMMANDS_ADD_VFD )
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_BSP | \
+ CONFIG_COMMANDS_ADD_HWFLOW | \
+ CONFIG_COMMANDS_ADD_VFD )
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+
+#define CONFIG_BOOTDELAY 5
+#define CONFIG_PREBOOT "echo;echo *** booting ***;echo"
+#define CONFIG_BOOTARGS "console=ttyS0"
+#define CONFIG_ETHADDR 00:D0:93:00:61:11
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.3.27
+#define CONFIG_SERVERIP 192.168.3.1
+#define CONFIG_BOOTCOMMAND "run flash_nfs"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "nfs_args=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "rootpath=/opt/eldk/arm_920TDI\0" \
+ "ram_args=setenv bootargs root=/dev/ram rw\0" \
+ "add_net=setenv bootargs $(bootargs) ethaddr=$(ethaddr) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \
+ "add_misc=setenv bootargs $(bootargs) console=ttyS0 panic=1\0" \
+ "load=tftp 0xC100000 /tftpboot/TRAB/u-boot.bin\0" \
+ "update=protect off 1:0-7;era 1:0-7;cp.b 0xc100000 0 $(filesize);" \
+ "setenv filesize;saveenv\0" \
+ "loadfile=/tftpboot/TRAB/pImage\0" \
+ "loadaddr=c400000\0" \
+ "net_load=tftpboot $(loadaddr) $(loadfile)\0" \
+ "net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
+ "kernel_addr=00040000\0" \
+ "flash_nfs=run nfs_args add_net add_misc;bootm $(kernel_addr)\0" \
+ "mdm_init1=ATZ\0" \
+ "mdm_init2=ATS0=1\0" \
+ "mdm_flow_control=rts/cts\0"
+
+#if 0 /* disabled for development */
+#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
+#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "system" /* 1st password */
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+/* what's this ? it's not used anywhere */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "TRAB # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0c000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0d000000 /* 16 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0x0cf00000 /* default load address */
+
+#ifdef CONFIG_TRAB_50MHZ
+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
+/* it to wrap 100 times (total 1562500) to get 1 sec. */
+/* this should _really_ be calculated !! */
+#define CFG_HZ 1562500
+#else
+/* the PWM TImer 4 uses a counter of 10390 for 10 ms, so we need */
+/* it to wrap 100 times (total 1039000) to get 1 sec. */
+/* this should _really_ be calculated !! */
+#define CFG_HZ 1039000
+#endif
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_MISC_INIT_R /* have misc_init_r() function */
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x0c000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
+
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
+
+/* The following #defines are needed to get flash environment right */
+#define CFG_MONITOR_BASE PHYS_FLASH_1
+#define CFG_MONITOR_LEN (256 << 10)
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT (71) /* max number of sectors on one chip */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
+
+#define CFG_ENV_IS_IN_FLASH 1
+
+/* Address and size of Primary Environment Sector */
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x4000)
+#define CFG_ENV_SIZE 0x4000
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
new file mode 100644
index 0000000..5aec47a
--- /dev/null
+++ b/include/configs/utx8245.h
@@ -0,0 +1,346 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Gregory E. Allen, gallen@arlut.utexas.edu
+ * Matthew E. Karger, karger@arlut.utexas.edu
+ * Applied Research Laboratories, The University of Texas at Austin
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ *
+ * Configuration settings for the utx8245 board.
+ *
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X 1
+#define CONFIG_MPC8245 1
+#define CONFIG_UTX8245 1
+#define DEBUG 1
+
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 57600
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_BOOTDELAY 5
+#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
+#define CONFIG_BOOTCOMMAND "bootm FF920000 FF800000" /* autoboot command */
+#define CONFIG_BOOTARGS "root=/dev/ram console=ttyS0,57600" /* RAMdisk */
+#define CONFIG_ETHADDR 41:52:4c:61:00:01 /* MAC address */
+#define CONFIG_SERVERIP 10.8.17.105
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_COMMANDS (CFG_CMD_DFL | CFG_CMD_BDI | CFG_CMD_PCI \
+ | CFG_CMD_FLASH | CFG_CMD_MEMORY \
+ | CFG_CMD_ENV | CFG_CMD_CONSOLE \
+ | CFG_CMD_LOADS | CFG_CMD_LOADB \
+ | CFG_CMD_IMI | CFG_CMD_CACHE \
+ | CFG_CMD_RUN | CFG_CMD_ECHO \
+ | CFG_CMD_REGINFO | CFG_CMD_NET\
+ | CFG_CMD_DHCP)
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+ */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
+
+
+/*-----------------------------------------------------------------------
+ * PCI configuration
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_NET_MULTI
+#define CONFIG_EEPRO100
+
+#define PCI_ENET0_IOADDR 0x80000000
+#define PCI_ENET0_MEMADDR 0x80000000
+#define PCI_FIREWIRE_IOADDR 0x81000000
+#define PCI_FIREWIRE_MEMADDR 0x81000000
+
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_MAX_RAM_SIZE 0x10000000 /* amount of SDRAM */
+
+
+/* even though FLASHP_BASE is FF800000, with 2MB on RCS0, the
+ * reset vector is actually located at FF800100, but the 8245
+ * takes care of us.
+ */
+#define CFG_RESET_ADDRESS 0xFFF00100
+
+#define CFG_EUMB_ADDR 0xFC000000
+
+#define CFG_MONITOR_BASE TEXT_BASE
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*#define CFG_DRAM_TEST 1 */
+#define CFG_MEMTEST_START 0x00003000 /* memtest works on 0...256 MB */
+#define CFG_MEMTEST_END 0x0ff8ffa8 /* in SDRAM, skips exception */
+ /* vectors and U-Boot */
+
+
+/*--------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ *------------------------------------------------------------------*/
+#define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for */
+ /* initial data */
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*--------------------------------------------------------------------
+ * NS16550 Configuration
+ *------------------------------------------------------------------*/
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE 1
+
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500)
+#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600)
+
+/*--------------------------------------------------------------------
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ * For the detail description refer to the MPC8240 user's manual.
+ *------------------------------------------------------------------*/
+
+#define CONFIG_SYS_CLK_FREQ 33000000
+#define CFG_HZ 1000
+
+#define CFG_ETH_DEV_FN 0x7800
+#define CFG_ETH_IOBASE 0x00104000
+
+
+/*--------------------------------------------------------------------
+ * Memory Control Configuration Register values
+ * - see sec. 4.12 of MPC8245 UM
+ *------------------------------------------------------------------*/
+
+/* MCCR1 */
+#define CFG_ROMNAL 0
+#define CFG_ROMFAL 2 /* (tacc=70ns)*mem_freq - 2 */
+#define CFG_BANK0_ROW 2 /* SDRAM bank 7-0 row address */
+#define CFG_BANK1_ROW 2 /* bit count */
+#define CFG_BANK2_ROW 0
+#define CFG_BANK3_ROW 0
+#define CFG_BANK4_ROW 0
+#define CFG_BANK5_ROW 0
+#define CFG_BANK6_ROW 0
+#define CFG_BANK7_ROW 0
+
+/* MCCR2, refresh interval clock cycles */
+#define CFG_REFINT 480 /* 33 MHz SDRAM clock was 480 */
+
+/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4 */
+#define CFG_BSTOPRE 1023 /* burst to precharge[0..9], */
+ /* sets open page interval */
+
+/* MCCR3 */
+#define CFG_REFREC 5 /* Refresh to activate interval, trc */
+
+/* MCCR4 */
+#define CFG_PRETOACT 2 /* trp */
+#define CFG_ACTTOPRE 7 /* trcd + (burst length - 1) + tdrl */
+#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
+#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type, sequential */
+#define CFG_ACTORW 2 /* trcd min */
+#define CFG_DBUS_SIZE2 1 /* set for 8-bit RCS1, clear for 32,64 */
+#define CFG_REGISTERD_TYPE_BUFFER 1
+#define CFG_EXTROM 1
+#define CFG_REGDIMM 0
+
+/* calculate according to formula in sec. 6-22 of 8245 UM */
+#define CFG_PGMAX 50 /* how long the 8245 retains the */
+ /* currently accessed page in memory */
+ /* was 45 */
+
+#define CFG_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note */
+ /* bottom 3 bits MUST be 0 */
+
+#define CFG_DLL_MAX_DELAY 0x04
+#define CFG_DLL_EXTEND 0x80
+#define CFG_PCI_HOLD_DEL 0x20
+
+
+/* Memory bank settings.
+ * Only bits 20-29 are actually used from these values to set the
+ * start/end addresses. The upper two bits will always be 0, and the lower
+ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
+ * address. Refer to the MPC8245 user manual.
+ */
+
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (CFG_MAX_RAM_SIZE/2 - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START CFG_MAX_RAM_SIZE/2
+#define CFG_BANK1_END (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK1_ENABLE 1
+#define CFG_BANK2_START 0x3ff00000 /* not available in this design */
+#define CFG_BANK2_END 0x3fffffff
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x3ff00000
+#define CFG_BANK3_END 0x3fffffff
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x3ff00000
+#define CFG_BANK4_END 0x3fffffff
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x3ff00000
+#define CFG_BANK5_END 0x3fffffff
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x3ff00000
+#define CFG_BANK6_END 0x3fffffff
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x3ff00000
+#define CFG_BANK7_END 0x3fffffff
+#define CFG_BANK7_ENABLE 0
+
+/*--------------------------------------------------------------------
+ * 4.4 - Output Driver Control Register
+ *------------------------------------------------------------------*/
+#define CFG_ODCR 0xe5
+
+/*--------------------------------------------------------------------
+ * 4.8 - Error Handling Registers
+ *------------------------------------------------------------------*/
+#define CFG_ERRENR1 0x11 /* enable SDRAM refresh overflow error */
+
+/* SDRAM 0-256 MB */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* stack in dcache */
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+/* PCI memory */
+#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* Flash, config addrs, etc. */
+#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization (AMD AM29LV116D)
+ */
+#define CFG_FLASH_BASE 0xFF800000
+
+#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
+#define CFG_MAX_FLASH_SECT 35 /* Max number of sectors in one bank */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+ /* Warning: environment is not EMBEDDED in the U-Boot code.
+ * It's stored in flash separately.
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+
+#define CFG_ENV_ADDR 0xFF9FA000 /* flash sector SA33 */
+#define CFG_ENV_SIZE 0x2000 /* Size of the Environment */
+#define CFG_ENV_OFFSET 0 /* starting right at the beginning */
+#define CFG_ENV_SECT_SIZE 0x2000 /* Size of the Environment Sector */
+
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#undef CFG_RAMBOOT
+#else
+#define CFG_RAMBOOT
+#endif
+
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+#endif /* __CONFIG_H */
diff --git a/include/dtt.h b/include/dtt.h
new file mode 100644
index 0000000..f3d95ff
--- /dev/null
+++ b/include/dtt.h
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2001
+ * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Digital Thermometers and Thermostats.
+ */
+#ifndef _DTT_H_
+#define _DTT_H_
+
+#if defined(CONFIG_DTT_LM75) || defined(CONFIG_DTT_DS1621)
+#define CONFIG_DTT /* We have a DTT */
+
+#define DTT_COMMERCIAL_MAX_TEMP 70 /* 0 - +70 C */
+#define DTT_INDUSTRIAL_MAX_TEMP 85 /* -40 - +85 C */
+#define DTT_AUTOMOTIVE_MAX_TEMP 105 /* -40 - +105 C */
+#ifndef CFG_DTT_MAX_TEMP
+#define CFG_DTT_MAX_TEMP DTT_COMMERCIAL_MAX_TEMP
+#endif
+#ifndef CFG_DTT_HYSTERESIS
+#define CFG_DTT_HYSTERESIS 5 /* 5 C */
+#endif
+
+extern int dtt_init (void);
+extern int dtt_read(int sensor, int reg);
+extern int dtt_write(int sensor, int reg, int val);
+extern int dtt_get_temp(int sensor);
+#endif
+
+#if defined(CONFIG_DTT_LM75)
+#define DTT_READ_TEMP 0x0
+#define DTT_CONFIG 0x1
+#define DTT_TEMP_HYST 0x2
+#define DTT_TEMP_SET 0x3
+#endif
+
+#if defined(CONFIG_DTT_DS1621)
+#define DTT_READ_TEMP 0xAA
+#define DTT_READ_COUNTER 0xA8
+#define DTT_READ_SLOPE 0xA9
+#define DTT_WRITE_START_CONV 0xEE
+#define DTT_WRITE_STOP_CONV 0x22
+#define DTT_TEMP_HIGH 0xA1
+#define DTT_TEMP_LOW 0xA2
+#define DTT_CONFIG 0xAC
+#endif
+
+#endif /* _DTT_H_ */
diff --git a/include/environment.h b/include/environment.h
new file mode 100644
index 0000000..fe8465b
--- /dev/null
+++ b/include/environment.h
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ENVIRONMENT_H_
+#define _ENVIRONMENT_H_ 1
+
+/**************************************************************************
+ *
+ * The "environment" is stored as a list of '\0' terminated
+ * "name=value" strings. The end of the list is marked by a double
+ * '\0'. New entries are always added at the end. Deleting an entry
+ * shifts the remaining entries to the front. Replacing an entry is a
+ * combination of deleting the old value and adding the new one.
+ *
+ * The environment is preceeded by a 32 bit CRC over the data part.
+ *
+ **************************************************************************
+ */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_OFFSET
+# define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE)
+# endif
+# if !defined(CFG_ENV_ADDR_REDUND) && defined(CFG_ENV_OFFSET_REDUND)
+# define CFG_ENV_ADDR_REDUND (CFG_FLASH_BASE + CFG_ENV_OFFSET_REDUND)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# if defined(CFG_ENV_ADDR_REDUND) && !defined(CFG_ENV_SIZE_REDUND)
+# define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
+# endif
+# if (CFG_ENV_ADDR >= CFG_MONITOR_BASE) && \
+ (CFG_ENV_ADDR+CFG_ENV_SIZE) <= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+# define ENV_IS_EMBEDDED 1
+# endif
+# if defined(CFG_ENV_ADDR_REDUND) || defined(CFG_ENV_OFFSET_REDUND)
+# define CFG_REDUNDAND_ENVIRONMENT 1
+# endif
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+
+#ifdef CFG_REDUNDAND_ENVIRONMENT
+# define ENV_HEADER_SIZE (sizeof(unsigned long) + 1)
+#else
+# define ENV_HEADER_SIZE (sizeof(unsigned long))
+#endif
+
+
+#define ENV_SIZE (CFG_ENV_SIZE - ENV_HEADER_SIZE)
+
+typedef struct environment_s {
+ unsigned long crc; /* CRC32 over data bytes */
+#ifdef CFG_REDUNDAND_ENVIRONMENT
+ unsigned char flags; /* active/obsolete flags */
+#endif
+ unsigned char data[ENV_SIZE]; /* Environment data */
+} env_t;
+
+#endif /* _ENVIRONMENT_H_ */
diff --git a/include/linux/byteorder/generic.h b/include/linux/byteorder/generic.h
new file mode 100644
index 0000000..cff850f
--- /dev/null
+++ b/include/linux/byteorder/generic.h
@@ -0,0 +1,180 @@
+#ifndef _LINUX_BYTEORDER_GENERIC_H
+#define _LINUX_BYTEORDER_GENERIC_H
+
+/*
+ * linux/byteorder_generic.h
+ * Generic Byte-reordering support
+ *
+ * Francois-Rene Rideau <fare@tunes.org> 19970707
+ * gathered all the good ideas from all asm-foo/byteorder.h into one file,
+ * cleaned them up.
+ * I hope it is compliant with non-GCC compilers.
+ * I decided to put __BYTEORDER_HAS_U64__ in byteorder.h,
+ * because I wasn't sure it would be ok to put it in types.h
+ * Upgraded it to 2.1.43
+ * Francois-Rene Rideau <fare@tunes.org> 19971012
+ * Upgraded it to 2.1.57
+ * to please Linus T., replaced huge #ifdef's between little/big endian
+ * by nestedly #include'd files.
+ * Francois-Rene Rideau <fare@tunes.org> 19971205
+ * Made it to 2.1.71; now a facelift:
+ * Put files under include/linux/byteorder/
+ * Split swab from generic support.
+ *
+ * TODO:
+ * = Regular kernel maintainers could also replace all these manual
+ * byteswap macros that remain, disseminated among drivers,
+ * after some grep or the sources...
+ * = Linus might want to rename all these macros and files to fit his taste,
+ * to fit his personal naming scheme.
+ * = it seems that a few drivers would also appreciate
+ * nybble swapping support...
+ * = every architecture could add their byteswap macro in asm/byteorder.h
+ * see how some architectures already do (i386, alpha, ppc, etc)
+ * = cpu_to_beXX and beXX_to_cpu might some day need to be well
+ * distinguished throughout the kernel. This is not the case currently,
+ * since little endian, big endian, and pdp endian machines needn't it.
+ * But this might be the case for, say, a port of Linux to 20/21 bit
+ * architectures (and F21 Linux addict around?).
+ */
+
+/*
+ * The following macros are to be defined by <asm/byteorder.h>:
+ *
+ * Conversion of long and short int between network and host format
+ * ntohl(__u32 x)
+ * ntohs(__u16 x)
+ * htonl(__u32 x)
+ * htons(__u16 x)
+ * It seems that some programs (which? where? or perhaps a standard? POSIX?)
+ * might like the above to be functions, not macros (why?).
+ * if that's true, then detect them, and take measures.
+ * Anyway, the measure is: define only ___ntohl as a macro instead,
+ * and in a separate file, have
+ * unsigned long inline ntohl(x){return ___ntohl(x);}
+ *
+ * The same for constant arguments
+ * __constant_ntohl(__u32 x)
+ * __constant_ntohs(__u16 x)
+ * __constant_htonl(__u32 x)
+ * __constant_htons(__u16 x)
+ *
+ * Conversion of XX-bit integers (16- 32- or 64-)
+ * between native CPU format and little/big endian format
+ * 64-bit stuff only defined for proper architectures
+ * cpu_to_[bl]eXX(__uXX x)
+ * [bl]eXX_to_cpu(__uXX x)
+ *
+ * The same, but takes a pointer to the value to convert
+ * cpu_to_[bl]eXXp(__uXX x)
+ * [bl]eXX_to_cpup(__uXX x)
+ *
+ * The same, but change in situ
+ * cpu_to_[bl]eXXs(__uXX x)
+ * [bl]eXX_to_cpus(__uXX x)
+ *
+ * See asm-foo/byteorder.h for examples of how to provide
+ * architecture-optimized versions
+ *
+ */
+
+
+#if defined(__KERNEL__)
+/*
+ * inside the kernel, we can use nicknames;
+ * outside of it, we must avoid POSIX namespace pollution...
+ */
+#define cpu_to_le64 __cpu_to_le64
+#define le64_to_cpu __le64_to_cpu
+#define cpu_to_le32 __cpu_to_le32
+#define le32_to_cpu __le32_to_cpu
+#define cpu_to_le16 __cpu_to_le16
+#define le16_to_cpu __le16_to_cpu
+#define cpu_to_be64 __cpu_to_be64
+#define be64_to_cpu __be64_to_cpu
+#define cpu_to_be32 __cpu_to_be32
+#define be32_to_cpu __be32_to_cpu
+#define cpu_to_be16 __cpu_to_be16
+#define be16_to_cpu __be16_to_cpu
+#define cpu_to_le64p __cpu_to_le64p
+#define le64_to_cpup __le64_to_cpup
+#define cpu_to_le32p __cpu_to_le32p
+#define le32_to_cpup __le32_to_cpup
+#define cpu_to_le16p __cpu_to_le16p
+#define le16_to_cpup __le16_to_cpup
+#define cpu_to_be64p __cpu_to_be64p
+#define be64_to_cpup __be64_to_cpup
+#define cpu_to_be32p __cpu_to_be32p
+#define be32_to_cpup __be32_to_cpup
+#define cpu_to_be16p __cpu_to_be16p
+#define be16_to_cpup __be16_to_cpup
+#define cpu_to_le64s __cpu_to_le64s
+#define le64_to_cpus __le64_to_cpus
+#define cpu_to_le32s __cpu_to_le32s
+#define le32_to_cpus __le32_to_cpus
+#define cpu_to_le16s __cpu_to_le16s
+#define le16_to_cpus __le16_to_cpus
+#define cpu_to_be64s __cpu_to_be64s
+#define be64_to_cpus __be64_to_cpus
+#define cpu_to_be32s __cpu_to_be32s
+#define be32_to_cpus __be32_to_cpus
+#define cpu_to_be16s __cpu_to_be16s
+#define be16_to_cpus __be16_to_cpus
+#endif
+
+
+/*
+ * Handle ntohl and suches. These have various compatibility
+ * issues - like we want to give the prototype even though we
+ * also have a macro for them in case some strange program
+ * wants to take the address of the thing or something..
+ *
+ * Note that these used to return a "long" in libc5, even though
+ * long is often 64-bit these days.. Thus the casts.
+ *
+ * They have to be macros in order to do the constant folding
+ * correctly - if the argument passed into a inline function
+ * it is no longer constant according to gcc..
+ */
+
+#undef ntohl
+#undef ntohs
+#undef htonl
+#undef htons
+
+/*
+ * Do the prototypes. Somebody might want to take the
+ * address or some such sick thing..
+ */
+#if defined(__KERNEL__) || (defined (__GLIBC__) && __GLIBC__ >= 2)
+extern __u32 ntohl(__u32);
+extern __u32 htonl(__u32);
+#else
+extern unsigned long int ntohl(unsigned long int);
+extern unsigned long int htonl(unsigned long int);
+#endif
+extern unsigned short int ntohs(unsigned short int);
+extern unsigned short int htons(unsigned short int);
+
+
+#if defined(__GNUC__) && (__GNUC__ >= 2)
+
+#define ___htonl(x) __cpu_to_be32(x)
+#define ___htons(x) __cpu_to_be16(x)
+#define ___ntohl(x) __be32_to_cpu(x)
+#define ___ntohs(x) __be16_to_cpu(x)
+
+#if defined(__KERNEL__) || (defined (__GLIBC__) && __GLIBC__ >= 2)
+#define htonl(x) ___htonl(x)
+#define ntohl(x) ___ntohl(x)
+#else
+#define htonl(x) ((unsigned long)___htonl(x))
+#define ntohl(x) ((unsigned long)___ntohl(x))
+#endif
+#define htons(x) ___htons(x)
+#define ntohs(x) ___ntohs(x)
+
+#endif /* OPTIMIZE */
+
+
+#endif /* _LINUX_BYTEORDER_GENERIC_H */
diff --git a/include/mpc824x.h b/include/mpc824x.h
new file mode 100644
index 0000000..0cd7898
--- /dev/null
+++ b/include/mpc824x.h
@@ -0,0 +1,575 @@
+/*
+ * Copyright Rob Taylor, Flying Pig Systems Ltd. 2000.
+ * Copyright (C) 2001, James Dougherty, jfd@cs.stanford.edu
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MPC824X_H__
+#define __MPC824X_H__
+
+#include <config.h>
+
+/* CPU Types */
+#define CPU_TYPE_601 0x01 /* PPC 601 CPU */
+#define CPU_TYPE_602 0x02 /* PPC 602 CPU */
+#define CPU_TYPE_603 0x03 /* PPC 603 CPU */
+#define CPU_TYPE_603E 0x06 /* PPC 603e CPU */
+#define CPU_TYPE_603P 0x07 /* PPC 603p CPU */
+#define CPU_TYPE_604 0x04 /* PPC 604 CPU */
+#define CPU_TYPE_604E 0x09 /* PPC 604e CPU */
+#define CPU_TYPE_604R 0x0a /* PPC 604r CPU */
+#define CPU_TYPE_750 0x08 /* PPC 750 CPU */
+#define CPU_TYPE_8240 0x81 /* PPC 8240 CPU */
+#define CPU_TYPE_8245 0x8081 /* PPC 8245/8241 CPU */
+#define _CACHE_ALIGN_SIZE 32 /* cache line size */
+
+/* spr976 - DMISS data tlb miss address register
+ * spr977 - DCMP data tlb miss compare register
+ * spr978 - HASH1 PTEG1 address register
+ * spr980 - HASH2 PTEG2 address register
+ * IMISS - instruction tlb miss address register
+ * ICMP - instruction TLB mis compare register
+ * RPA - real page address register
+ * HID0 - hardware implemntation register
+ * HID2 - instruction address breakpoint register
+ */
+
+/* Kahlua/MPC8240 defines */
+#define VEN_DEV_ID 0x00021057 /* Vendor and Dev. ID for MPC106 */
+#define KAHLUA_ID 0x00031057 /* Vendor & Dev Id for Kahlua's PCI */
+#define KAHLUA2_ID 0x00061057 /* 8245 is aka Kahlua-2 */
+#define BMC_BASE 0x80000000 /* Kahlua ID in PCI Memory space */
+#define CHRP_REG_ADDR 0xfec00000 /* MPC107 Config, Map B */
+#define CHRP_REG_DATA 0xfee00000 /* MPC107 Config, Map B */
+#define CHRP_ISA_MEM_PHYS 0xfd000000
+#define CHRP_ISA_MEM_BUS 0x00000000
+#define CHRP_ISA_MEM_SIZE 0x01000000
+#define CHRP_ISA_IO_PHYS 0xfe000000
+#define CHRP_ISA_IO_BUS 0x00000000
+#define CHRP_ISA_IO_SIZE 0x00800000
+#define CHRP_PCI_IO_PHYS 0xfe800000
+#define CHRP_PCI_IO_BUS 0x00800000
+#define CHRP_PCI_IO_SIZE 0x00400000
+#define CHRP_PCI_MEM_PHYS 0x80000000
+#define CHRP_PCI_MEM_BUS 0x80000000
+#define CHRP_PCI_MEM_SIZE 0x7d000000
+#define CHRP_PCI_MEMORY_PHYS 0x00000000
+#define CHRP_PCI_MEMORY_BUS 0x00000000
+#define CHRP_PCI_MEMORY_SIZE 0x40000000
+#define PREP_REG_ADDR 0x80000cf8 /* MPC107 Config, Map A */
+#define PREP_REG_DATA 0x80000cfc /* MPC107 Config, Map A */
+#define PREP_ISA_IO_PHYS 0x80000000
+#define PREP_ISA_IO_BUS 0x00000000
+#define PREP_ISA_IO_SIZE 0x00800000
+#define PREP_PCI_IO_PHYS 0x81000000
+#define PREP_PCI_IO_BUS 0x01000000
+#define PREP_PCI_IO_SIZE 0x3e800000
+#define PREP_PCI_MEM_PHYS 0xc0000000
+#define PREP_PCI_MEM_BUS 0x00000000
+#define PREP_PCI_MEM_SIZE 0x3f000000
+#define PREP_PCI_MEMORY_PHYS 0x00000000
+#define PREP_PCI_MEMORY_BUS 0x80000000
+#define PREP_PCI_MEMORY_SIZE 0x80000000
+#define MPC107_PCI_CMD 0x80000004 /* MPC107 PCI cmd reg */
+#define MPC107_PCI_STAT 0x80000006 /* MPC107 PCI status reg */
+#define PROC_INT1_ADR 0x800000a8 /* MPC107 Processor i/f cfg1 */
+#define PROC_INT2_ADR 0x800000ac /* MPC107 Processor i/f cfg2 */
+#define MEM_CONT1_ADR 0x800000f0 /* MPC107 Memory control config. 1 */
+#define MEM_CONT2_ADR 0x800000f4 /* MPC107 Memory control config. 2 */
+#define MEM_CONT3_ADR 0x800000f8 /* MPC107 Memory control config. 3 */
+#define MEM_CONT4_ADR 0x800000fc /* MPC107 Memory control config. 4 */
+#define MEM_ERREN1_ADR 0x800000c0 /* MPC107 Memory error enable 1 */
+#define MEM_START1_ADR 0x80000080 /* MPC107 Memory starting addr */
+#define MEM_START2_ADR 0x80000084 /* MPC107 Memory starting addr-lo */
+#define XMEM_START1_ADR 0x80000088 /* MPC107 Extended mem. start addr-hi*/
+#define XMEM_START2_ADR 0x8000008c /* MPC107 Extended mem. start addr-lo*/
+#define MEM_END1_ADR 0x80000090 /* MPC107 Memory ending address */
+#define MEM_END2_ADR 0x80000094 /* MPC107 Memory ending addr-lo */
+#define XMEM_END1_ADR 0x80000098 /* MPC107 Extended mem. end addrs-hi */
+#define XMEM_END2_ADR 0x8000009c /* MPC107 Extended mem. end addrs-lo*/
+#define OUT_DRV_CONT 0x80000073 /* MPC107 Output Driver Control reg */
+#define MEM_EN_ADR 0x800000a0 /* Memory bank enable */
+#define PAGE_MODE 0x800000a3 /* MPC107 Page Mode Counter/Timer */
+
+/*-----------------------------------------------------------------------
+ * Exception offsets (PowerPC standard)
+ */
+#define EXC_OFF_RESERVED0 0x0000 /* Reserved */
+#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
+#define EXC_OFF_MACH_CHCK 0x0200 /* Machine Check */
+#define EXC_OFF_DATA_STOR 0x0300 /* Data Storage */
+#define EXC_OFF_INS_STOR 0x0400 /* Instruction Storage */
+#define EXC_OFF_EXTERNAL 0x0500 /* External */
+#define EXC_OFF_ALIGN 0x0600 /* Alignment */
+#define EXC_OFF_PROGRAM 0x0700 /* Program */
+#define EXC_OFF_FPUNAVAIL 0x0800 /* Floating-point Unavailable */
+#define EXC_OFF_DECR 0x0900 /* Decrementer */
+#define EXC_OFF_RESERVED1 0x0A00 /* Reserved */
+#define EXC_OFF_RESERVED2 0x0B00 /* Reserved */
+#define EXC_OFF_SYS_CALL 0x0C00 /* System Call */
+#define EXC_OFF_TRACE 0x0D00 /* Trace */
+#define EXC_OFF_FPUNASSIST 0x0E00 /* Floating-point Assist */
+
+ /* 0x0E10 - 0x0FFF are marked reserved in The PowerPC Architecture book */
+ /* these found in DINK code - may not apply to 8240*/
+#define EXC_OFF_PMI 0x0F00 /* Performance Monitoring Interrupt */
+#define EXC_OFF_VMXUI 0x0F20 /* VMX (AltiVec) Unavailable Interrupt */
+
+ /* 0x1000 - 0x2FFF are implementation specific */
+ /* these found in DINK code - may not apply to 8240 */
+#define EXC_OFF_ITME 0x1000 /* Instruction Translation Miss Exception */
+#define EXC_OFF_DLTME 0x1100 /* Data Load Translation Miss Exception */
+#define EXC_OFF_DSTME 0x1200 /* Data Store Translation Miss Exception */
+#define EXC_OFF_IABE 0x1300 /* Instruction Addr Breakpoint Exception */
+#define EXC_OFF_SMIE 0x1400 /* System Management Interrupt Exception */
+#define EXC_OFF_JMDDI 0x1600 /* Java Mode denorm detect Interr -- WTF??*/
+#define EXC_OFF_RMTE 0x2000 /* Run Mode or Trace Exception */
+
+#define MAP_A_CONFIG_ADDR_HIGH 0x8000 /* Upper half of CONFIG_ADDR for Map A */
+#define MAP_A_CONFIG_ADDR_LOW 0x0CF8 /* Lower half of CONFIG_ADDR for Map A */
+#define MAP_A_CONFIG_DATA_HIGH 0x8000 /* Upper half of CONFIG_DAT for Map A */
+#define MAP_A_CONFIG_DATA_LOW 0x0CFC /* Lower half of CONFIG_DAT for Map A */
+#define MAP_B_CONFIG_ADDR_HIGH 0xfec0 /* Upper half of CONFIG_ADDR for Map B */
+#define MAP_B_CONFIG_ADDR_LOW 0x0000 /* Lower half of CONFIG_ADDR for Map B */
+#define MAP_B_CONFIG_DATA_HIGH 0xfee0 /* Upper half of CONFIG_DAT for Map B */
+#define MAP_B_CONFIG_DATA_LOW 0x0000 /* Lower half of CONFIG_DAT for Map B */
+
+
+#if defined(CFG_ADDR_MAP_A)
+#define CONFIG_ADDR_HIGH MAP_A_CONFIG_ADDR_HIGH /* Upper half of CONFIG_ADDR */
+#define CONFIG_ADDR_LOW MAP_A_CONFIG_ADDR_LOW /* Lower half of CONFIG_ADDR */
+#define CONFIG_DATA_HIGH MAP_A_CONFIG_DATA_HIGH /* Upper half of CONFIG_DAT */
+#define CONFIG_DATA_LOW MAP_A_CONFIG_DATA_LOW /* Lower half of CONFIG_DAT */
+#else /* Assume Map B, default */
+#define CONFIG_ADDR_HIGH MAP_B_CONFIG_ADDR_HIGH /* Upper half of CONFIG_ADDR */
+#define CONFIG_ADDR_LOW MAP_B_CONFIG_ADDR_LOW /* Lower half of CONFIG_ADDR */
+#define CONFIG_DATA_HIGH MAP_B_CONFIG_DATA_HIGH /* Upper half of CONFIG_DAT */
+#define CONFIG_DATA_LOW MAP_B_CONFIG_DATA_LOW /* Lower half of CONFIG_DAT */
+#endif
+
+#define CONFIG_ADDR (CONFIG_ADDR_HIGH << 16 | CONFIG_ADDR_LOW)
+
+#define CONFIG_DATA (CONFIG_DATA_HIGH << 16 | CONFIG_DATA_LOW)
+
+/* Macros to write to config registers. addr should be a constant in all cases */
+
+#define CONFIG_WRITE_BYTE( addr, data ) \
+ __asm__ __volatile__( \
+ " stwbrx %1, 0, %0\n \
+ sync\n \
+ stb %3, %4(%2)\n \
+ sync " \
+ : /* no output */ \
+ : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \
+ "b" (CONFIG_DATA), "r" (data), \
+ "n" ((addr) & 3));
+
+#define CONFIG_WRITE_HALFWORD( addr, data ) \
+ __asm__ __volatile__( \
+ " stwbrx %1, 0, %0\n \
+ sync\n \
+ sthbrx %3, %4, %2\n \
+ sync " \
+ : /* no output */ \
+ : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \
+ "r" (CONFIG_DATA), "r" (data), \
+ "b" ((addr) & 3));
+
+/* this assumes it's writeing on word boundaries*/
+#define CONFIG_WRITE_WORD( addr, data ) \
+ __asm__ __volatile__( \
+ " stwbrx %1, 0, %0\n \
+ sync\n \
+ stwbrx %3, 0, %2\n \
+ sync " \
+ : /* no output */ \
+ : "r" (CONFIG_ADDR), "r" (addr), \
+ "r" (CONFIG_DATA), "r" (data));
+
+/* Configuration register reads*/
+
+#define CONFIG_READ_BYTE( addr, reg ) \
+ __asm__ ( \
+ " stwbrx %1, 0, %2\n \
+ sync\n \
+ lbz %0, %4(%3)\n \
+ sync " \
+ : "=r" (reg) \
+ : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \
+ "b" (CONFIG_DATA), "n" ((addr) & 3));
+
+
+#define CONFIG_READ_HALFWORD( addr, reg ) \
+ __asm__ ( \
+ " stwbrx %1, 0, %2\n \
+ sync\n \
+ lhbrx %0, %4, %3\n \
+ sync " \
+ : "=r" (reg) \
+ : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \
+ "r" (CONFIG_DATA), \
+ "b" ((addr) & 3));
+
+/* this assumes it's reading on word boundaries*/
+#define CONFIG_READ_WORD( addr, reg ) \
+ __asm__ ( \
+ " stwbrx %1, 0, %2\n \
+ sync\n \
+ lwbrx %0, 0, %3\n \
+ sync " \
+ : "=r" (reg) \
+ : "r" (addr), "r" (CONFIG_ADDR),\
+ "r" (CONFIG_DATA));
+
+/*
+ * configuration register 'addresses'.
+ * These are described in chaper 5 of the 8240 users manual.
+ * Where the register has an abreviation in the manual, this has
+ * been usaed here, otherwise a name in keeping with the norm has
+ * been invented.
+ * Note that some of these registers aren't documented in the manual.
+ */
+
+#define PCICR 0x80000004 /* PCI Command Register */
+#define PCISR 0x80000006 /* PCI Status Register */
+#define REVID 0x80000008 /* CPU revision id */
+#define PIR 0x80000009 /* PCI Programming Interface Register */
+#define PBCCR 0x8000000b /* PCI Base Class Code Register */
+#define PCLSR 0x8000000c /* Processor Cache Line Size Register */
+#define PLTR 0x8000000d /* PCI Latancy Timer Register */
+#define PHTR 0x8000000e /* PCI Header Type Register */
+#define BISTCTRL 0x8000000f /* BIST Control */
+#define LMBAR 0x80000010 /* Local Base Addres Register */
+#define PCSRBAR 0x80000014 /* PCSR Base Address Register */
+#define ILR 0x8000003c /* PCI Interrupt Line Register */
+#define IPR 0x8000003d /* Interrupt Pin Register */
+#define MINGNT 0x8000003e /* MIN GNI */
+#define MAXLAT 0x8000003f /* MAX LAT */
+#define PCIACR 0x80000046 /* PCI Arbiter Control Register */
+#define PMCR1 0x80000070 /* Power management config. 1 */
+#define PMCR2 0x80000072 /* Power management config. 2 */
+#define ODCR 0x80000073 /* Output Driver Control Register */
+#define CLKDCR 0x80000074 /* CLK Driver Control Register */
+#if defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241)
+#define MIOCR1 0x80000076 /* Miscellaneous I/O Control Register 1 */
+#define MIOCR2 0x80000077 /* Miscellaneous I/O Control Register 2 */
+#endif
+#define EUMBBAR 0x80000078 /* Embedded Utilities Memory Block Base Address Register */
+#define EUMBBAR_VAL 0x80500000 /* PCI Relocation offset for EUMB region */
+#define EUMBSIZE 0x00100000 /* Size of EUMB region */
+
+#define MSAR1 0x80000080 /* Memory Starting Address Register 1 */
+#define MSAR2 0x80000084 /* Memory Starting Address Register 2 */
+#define EMSAR1 0x80000088 /* Extended Memory Starting Address Register 1*/
+#define EMSAR2 0x8000008c /* Extended Memory Starting Address Register 2*/
+#define MEAR1 0x80000090 /* Memory Ending Address Register 1 */
+#define MEAR2 0x80000094 /* Memory Ending Address Register 2 */
+#define EMEAR1 0x80000098 /* Extended Memory Ending Address Register 1 */
+#define EMEAR2 0x8000009c /* Extended Memory Ending Address Register 2 */
+#define MBER 0x800000a0 /* Memory bank Enable Register*/
+#define MPMR 0x800000a3 /* Memory Page Mode Register (stores PGMAX) */
+#define PICR1 0x800000a8 /* Processor Interface Configuration Register 1 */
+#define PICR2 0x800000ac /* Processor Interface Configuration Register 2 */
+#define ECCSBECR 0x800000b8 /* ECC Single-Bit Error Counter Register */
+#define ECCSBETR 0x800000b8 /* ECC Single-Bit Error Trigger Register */
+#define ERRENR1 0x800000c0 /* Error Enableing Register 1 */
+#define ERRENR2 0x800000c4 /* Error Enableing Register 2 */
+#define ERRDR1 0x800000c1 /* Error Detection Register 1 */
+#define IPBESR 0x800000c3 /* Internal Processor Error Status Register */
+#define ERRDR2 0x800000c5 /* Error Detection Register 2 */
+#define PBESR 0x800000c7 /* PCI Bus Error Status Register */
+#define PBEAR 0x800000c8 /* Processor/PCI Bus Error Status Register */
+#define AMBOR 0x800000e0 /* Address Map B Options Register */
+#define MCCR1 0x800000f0 /* Memory Control Configuration Register 1 */
+#define MCCR2 0x800000f4 /* Memory Control Configuration Register 2 */
+#define MCCR3 0x800000f8 /* Memory Control Configuration Register 3 */
+#define MCCR4 0x800000fc /* Memory Control Configuration Register 4 */
+
+/* some values for some of the above */
+
+#define PICR1_CF_APARK 0x00000008
+#define PICR1_LE_MODE 0x00000020
+#define PICR1_ST_GATH_EN 0x00000040
+#if defined(CONFIG_MPC8240)
+#define PICR1_EN_PCS 0x00000080 /* according to dink code, sets the 8240 to handle pci config space */
+#elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241)
+#define PICR1_NO_BUSW_CK 0x00000080 /* no bus width check for flash writes */
+#define PICR1_DEC 0x00000100 /* Time Base enable on 8245/8241 */
+#define ERCR1 0x800000d0 /* Extended ROM Configuration Register 1 */
+#define ERCR2 0x800000d4 /* Extended ROM Configuration Register 2 */
+#define ERCR3 0x800000d8 /* Extended ROM Configuration Register 3 */
+#define ERCR4 0x800000dc /* Extended ROM Configuration Register 4 */
+#define MIOCR1 0x80000076 /* Miscellaneous I/O Control Register 1 */
+#define MIOCR1_ADR_X 0x80000074 /* Miscellaneous I/O Control Register 1 */
+#define MIOCR1_SHIFT 2
+#define MIOCR2 0x80000077 /* Miscellaneous I/O Control Register 2 */
+#define MIOCR2_ADR_X 0x80000074 /* Miscellaneous I/O Control Register 1 */
+#define MIOCR2_SHIFT 3
+#define ODCR_ADR_X 0x80000070 /* Output Driver Control register */
+#define ODCR_SHIFT 3
+#define PMCR2_ADR 0x80000072 /* Power Mgmnt Cfg 2 register */
+#define PMCR2_ADR_X 0x80000070
+#define PMCR2_SHIFT 3
+#define PMCR1_ADR 0x80000070 /* Power Mgmnt Cfg 1 reister */
+#else
+#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
+#endif
+#define PICR1_CF_DPARK 0x00000200
+#define PICR1_MCP_EN 0x00000800
+#define PICR1_FLASH_WR_EN 0x00001000
+#ifdef CONFIG_MPC8240
+#define PICR1_ADDRESS_MAP 0x00010000
+#define PIRC1_MSK 0xff000000
+#endif
+#define PICR1_PROC_TYPE_MSK 0x00060000
+#define PICR1_PROC_TYPE_603E 0x00040000
+#define PICR1_RCS0 0x00100000
+
+#define PICR2_CF_SNOOP_WS_MASK 0x000c0000
+#define PICR2_CF_SNOOP_WS_0WS 0x00000000
+#define PICR2_CF_SNOOP_WS_1WS 0x00040000
+#define PICR2_CF_SNOOP_WS_2WS 0x00080000
+#define PICR2_CF_SNOOP_WS_3WS 0x000c0000
+#define PICR2_CF_APHASE_WS_MASK 0x0000000c
+#define PICR2_CF_APHASE_WS_0WS 0x00000000
+#define PICR2_CF_APHASE_WS_1WS 0x00000004
+#define PICR2_CF_APHASE_WS_2WS 0x00000008
+#define PICR2_CF_APHASE_WS_3WS 0x0000000c
+
+#define MCCR1_ROMNAL_SHIFT 28
+#define MCCR1_ROMNAL_MSK 0xf0000000
+#define MCCR1_ROMFAL_SHIFT 23
+#define MCCR1_ROMFAL_MSK 0x0f800000
+#define MCCR1_DBUS_SIZE0 0x00400000
+#define MCCR1_BURST 0x00100000
+#define MCCR1_MEMGO 0x00080000
+#define MCCR1_SREN 0x00040000
+#if defined(CONFIG_MPC8240)
+#define MCCR1_RAM_TYPE 0x00020000
+#elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241)
+#define MCCR1_SDRAM_EN 0x00020000
+#else
+#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
+#endif
+#define MCCR1_PCKEN 0x00010000
+#define MCCR1_BANK1ROW_SHIFT 2
+#define MCCR1_BANK2ROW_SHIFT 4
+#define MCCR1_BANK3ROW_SHIFT 6
+#define MCCR1_BANK4ROW_SHIFT 8
+#define MCCR1_BANK5ROW_SHIFT 10
+#define MCCR1_BANK6ROW_SHIFT 12
+#define MCCR1_BANK7ROW_SHIFT 14
+
+#define MCCR2_TS_WAIT_TIMER_MSK 0xe0000000
+#define MCCR2_TS_WAIT_TIMER_SHIFT 29
+#define MCCR2_ASRISE_MSK 0x1e000000
+#define MCCR2_ASRISE_SHIFT 25
+#define MCCR2_ASFALL_MSK 0x01e00000
+#define MCCR2_ASFALL_SHIFT 21
+
+#define MCCR2_INLINE_PAR_NOT_ECC 0x00100000
+#define MCCR2_WRITE_PARITY_CHK 0x00080000
+#define MCCR2_INLFRD_PARECC_CHK_EN 0x00040000
+#ifdef CONFIG_MPC8240
+#define MCCR2_ECC_EN 0x00020000
+#define MCCR2_EDO 0x00010000
+#endif
+#define MCCR2_REFINT_MSK 0x0000fffc
+#define MCCR2_REFINT_SHIFT 2
+#define MCCR2_RSV_PG 0x00000002
+#define MCCR2_PMW_PAR 0x00000001
+
+#define MCCR3_BSTOPRE2TO5_MSK 0xf0000000 /*BSTOPRE[2-5]*/
+#define MCCR3_BSTOPRE2TO5_SHIFT 28
+#define MCCR3_REFREC_MSK 0x0f000000
+#define MCCR3_REFREC_SHIFT 24
+#ifdef CONFIG_MPC8240
+#define MCCR3_RDLAT_MSK 0x00f00000
+#define MCCR3_RDLAT_SHIFT 20
+#define MCCR3_CPX 0x00010000
+#define MCCR3_RAS6P_MSK 0x00078000
+#define MCCR3_RAS6P_SHIFT 15
+#define MCCR3_CAS5_MSK 0x00007000
+#define MCCR3_CAS5_SHIFT 12
+#define MCCR3_CP4_MSK 0x00000e00
+#define MCCR3_CP4_SHIFT 9
+#define MCCR3_CAS3_MSK 0x000001c0
+#define MCCR3_CAS3_SHIFT 6
+#define MCCR3_RCD2_MSK 0x00000038
+#define MCCR3_RCD2_SHIFT 3
+#define MCCR3_RP1_MSK 0x00000007
+#define MCCR3_RP1_SHIFT 0
+#endif
+
+#define MCCR4_PRETOACT_MSK 0xf0000000
+#define MCCR4_PRETOACT_SHIFT 28
+#define MCCR4_ACTTOPRE_MSK 0x0f000000
+#define MCCR4_ACTTOPRE_SHIFT 24
+#define MCCR4_WMODE 0x00800000
+#define MCCR4_INLINE 0x00400000
+#if defined(CONFIG_MPC8240)
+#define MCCR4_BIT21 0x00200000 /* this include cos DINK code sets it- unknown function*/
+#elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241)
+#define MCCR4_EXTROM 0x00200000 /* enables Extended ROM space */
+#else
+#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
+#endif
+#define MCCR4_REGISTERED 0x00100000
+#define MCCR4_BSTOPRE0TO1_MSK 0x000c0000 /*BSTOPRE[0-1]*/
+#define MCCR4_BSTOPRE0TO1_SHIFT 18
+#define MCCR4_REGDIMM 0x00008000
+#define MCCR4_SDMODE_MSK 0x00007f00
+#define MCCR4_SDMODE_SHIFT 8
+#define MCCR4_ACTTORW_MSK 0x000000f0
+#define MCCR4_ACTTORW_SHIFT 4
+#define MCCR4_BSTOPRE6TO9_MSK 0x0000000f /*BSTOPRE[6-9]*/
+#define MCCR4_BSTOPRE6TO9_SHIFT 0
+#define MCCR4_DBUS_SIZE2_SHIFT 17
+
+#define MICR_ADDR_MASK 0x0ff00000
+#define MICR_ADDR_SHIFT 20
+#define MICR_EADDR_MASK 0x30000000
+#define MICR_EADDR_SHIFT 28
+
+#define BATU_BEPI_MSK 0xfffe0000
+#define BATU_BL_MSK 0x00001ffc
+
+#define BATU_BL_128K 0x00000000
+#define BATU_BL_256K 0x00000004
+#define BATU_BL_512K 0x0000000c
+#define BATU_BL_1M 0x0000001c
+#define BATU_BL_2M 0x0000003c
+#define BATU_BL_4M 0x0000007c
+#define BATU_BL_8M 0x000000fc
+#define BATU_BL_16M 0x000001fc
+#define BATU_BL_32M 0x000003fc
+#define BATU_BL_64M 0x000007fc
+#define BATU_BL_128M 0x00000ffc
+#define BATU_BL_256M 0x00001ffc
+
+#define BATU_VS 0x00000002
+#define BATU_VP 0x00000001
+
+#define BATL_BRPN_MSK 0xfffe0000
+#define BATL_WIMG_MSK 0x00000078
+
+#define BATL_WRITETHROUGH 0x00000040
+#define BATL_CACHEINHIBIT 0x00000020
+#define BATL_MEMCOHERENCE 0x00000010
+#define BATL_GUARDEDSTORAGE 0x00000008
+
+#define BATL_PP_MSK 0x00000003
+#define BATL_PP_00 0x00000000 /* No access */
+#define BATL_PP_01 0x00000001 /* Read-only */
+#define BATL_PP_10 0x00000002 /* Read-write */
+#define BATL_PP_11 0x00000003
+
+/*
+ * I'd attempt to do defines for the PP bits, but it's use is a bit
+ * too complex, see the PowerPC Operating Environment Architecture
+ * section in the PowerPc arch book, chapter 4.
+ */
+
+/*eumb and epic config*/
+
+#define EPIC_FPR 0x00041000
+#define EPIC_GCR 0x00041020
+#define EPIC_EICR 0x00041030
+#define EPIC_EVI 0x00041080
+#define EPIC_PI 0x00041090
+#define EPIC_SVR 0x000410E0
+#define EPIC_TFRR 0x000410F0
+
+/*
+ * Note the information for these is rather mangled in the 8240 manual.
+ * These are guesses.
+ */
+
+#define EPIC_GTCCR0 0x00041100
+#define EPIC_GTCCR1 0x00041140
+#define EPIC_GTCCR2 0x00041180
+#define EPIC_GTCCR3 0x000411C0
+#define EPIC_GTBCR0 0x00041110
+#define EPIC_GTBCR1 0x00041150
+#define EPIC_GTBCR2 0x00041190
+#define EPIC_GTBCR3 0x000411D0
+#define EPIC_GTVPR0 0x00041120
+#define EPIC_GTVPR1 0x00041160
+#define EPIC_GTVPR2 0x000411a0
+#define EPIC_GTVPR3 0x000411e0
+#define EPIC_GTDR0 0x00041130
+#define EPIC_GTDR1 0x00041170
+#define EPIC_GTDR2 0x000411b0
+#define EPIC_GTDR3 0x000411f0
+
+#define EPIC_IVPR0 0x00050200
+#define EPIC_IVPR1 0x00050220
+#define EPIC_IVPR2 0x00050240
+#define EPIC_IVPR3 0x00050260
+#define EPIC_IVPR4 0x00050280
+
+#define EPIC_SVPR0 0x00050200
+#define EPIC_SVPR1 0x00050220
+#define EPIC_SVPR2 0x00050240
+#define EPIC_SVPR3 0x00050260
+#define EPIC_SVPR4 0x00050280
+#define EPIC_SVPR5 0x000502A0
+#define EPIC_SVPR6 0x000502C0
+#define EPIC_SVPR7 0x000502E0
+#define EPIC_SVPR8 0x00050300
+#define EPIC_SVPR9 0x00050320
+#define EPIC_SVPRa 0x00050340
+#define EPIC_SVPRb 0x00050360
+#define EPIC_SVPRc 0x00050380
+#define EPIC_SVPRd 0x000503A0
+#define EPIC_SVPRe 0x000503C0
+#define EPIC_SVPRf 0x000503E0
+
+/* MPC8240 Byte Swap/PCI Support Macros */
+#define BYTE_SWAP_16_BIT(x) ( (((x) & 0x00ff) << 8) | ( (x) >> 8) )
+#define LONGSWAP(x) ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\
+ (((x) & 0x00ff0000) >> 8) | (((x) & 0xff000000) >> 24) )
+#define PCISWAP(x) LONGSWAP(x)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * MPC107 Support
+ *
+ */
+unsigned int mpc824x_mpc107_getreg(unsigned int regNum);
+void mpc824x_mpc107_setreg(unsigned int regNum, unsigned int regVal);
+void mpc824x_mpc107_write8(unsigned int address, unsigned char data);
+void mpc824x_mpc107_write16(unsigned int address, unsigned short data);
+void mpc824x_mpc107_write32(unsigned int address, unsigned int data);
+unsigned char mpc824x_mpc107_read8(unsigned int address);
+unsigned short mpc824x_mpc107_read16(unsigned int address);
+unsigned int mpc824x_mpc107_read32(unsigned int address);
+unsigned int mpc824x_eummbar_read(unsigned int regNum);
+void mpc824x_eummbar_write(unsigned int regNum, unsigned int regVal);
+
+#ifdef CONFIG_PCI
+struct pci_controller;
+void pci_cpm824x_init(struct pci_controller* hose);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __MPC824X_H__ */
diff --git a/include/pci.h b/include/pci.h
new file mode 100644
index 0000000..4875375
--- /dev/null
+++ b/include/pci.h
@@ -0,0 +1,475 @@
+/*
+ * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Andreas Heppel <aheppel@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * aloong with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PCI_H
+#define _PCI_H
+
+/*
+ * Under PCI, each device has 256 bytes of configuration address space,
+ * of which the first 64 bytes are standardized as follows:
+ */
+#define PCI_VENDOR_ID 0x00 /* 16 bits */
+#define PCI_DEVICE_ID 0x02 /* 16 bits */
+#define PCI_COMMAND 0x04 /* 16 bits */
+#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */
+#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */
+#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */
+#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */
+#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
+#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
+#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
+#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
+#define PCI_COMMAND_SERR 0x100 /* Enable SERR */
+#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
+
+#define PCI_STATUS 0x06 /* 16 bits */
+#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
+#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */
+#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
+#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
+#define PCI_STATUS_PARITY 0x100 /* Detected parity error */
+#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */
+#define PCI_STATUS_DEVSEL_FAST 0x000
+#define PCI_STATUS_DEVSEL_MEDIUM 0x200
+#define PCI_STATUS_DEVSEL_SLOW 0x400
+#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
+#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
+#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
+#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
+#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
+
+#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8
+ revision */
+#define PCI_REVISION_ID 0x08 /* Revision ID */
+#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */
+#define PCI_CLASS_DEVICE 0x0a /* Device class */
+#define PCI_CLASS_CODE 0x0b /* Device class code */
+#define PCI_CLASS_SUB_CODE 0x0a /* Device sub-class code */
+
+#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */
+#define PCI_LATENCY_TIMER 0x0d /* 8 bits */
+#define PCI_HEADER_TYPE 0x0e /* 8 bits */
+#define PCI_HEADER_TYPE_NORMAL 0
+#define PCI_HEADER_TYPE_BRIDGE 1
+#define PCI_HEADER_TYPE_CARDBUS 2
+
+#define PCI_BIST 0x0f /* 8 bits */
+#define PCI_BIST_CODE_MASK 0x0f /* Return result */
+#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */
+#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */
+
+/*
+ * Base addresses specify locations in memory or I/O space.
+ * Decoded size can be determined by writing a value of
+ * 0xffffffff to the register, and reading it back. Only
+ * 1 bits are decoded.
+ */
+#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */
+#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */
+#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */
+#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */
+#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */
+#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */
+#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */
+#define PCI_BASE_ADDRESS_SPACE_IO 0x01
+#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
+#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
+#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */
+#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */
+#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */
+#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */
+#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL)
+#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL)
+/* bit 1 is reserved if address_space = 1 */
+
+/* Header type 0 (normal devices) */
+#define PCI_CARDBUS_CIS 0x28
+#define PCI_SUBSYSTEM_VENDOR_ID 0x2c
+#define PCI_SUBSYSTEM_ID 0x2e
+#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */
+#define PCI_ROM_ADDRESS_ENABLE 0x01
+#define PCI_ROM_ADDRESS_MASK (~0x7ffUL)
+
+#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */
+
+/* 0x35-0x3b are reserved */
+#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */
+#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */
+#define PCI_MIN_GNT 0x3e /* 8 bits */
+#define PCI_MAX_LAT 0x3f /* 8 bits */
+
+/* Header type 1 (PCI-to-PCI bridges) */
+#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */
+#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */
+#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */
+#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */
+#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */
+#define PCI_IO_LIMIT 0x1d
+#define PCI_IO_RANGE_TYPE_MASK 0x0f /* I/O bridging type */
+#define PCI_IO_RANGE_TYPE_16 0x00
+#define PCI_IO_RANGE_TYPE_32 0x01
+#define PCI_IO_RANGE_MASK ~0x0f
+#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */
+#define PCI_MEMORY_BASE 0x20 /* Memory range behind */
+#define PCI_MEMORY_LIMIT 0x22
+#define PCI_MEMORY_RANGE_TYPE_MASK 0x0f
+#define PCI_MEMORY_RANGE_MASK ~0x0f
+#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */
+#define PCI_PREF_MEMORY_LIMIT 0x26
+#define PCI_PREF_RANGE_TYPE_MASK 0x0f
+#define PCI_PREF_RANGE_TYPE_32 0x00
+#define PCI_PREF_RANGE_TYPE_64 0x01
+#define PCI_PREF_RANGE_MASK ~0x0f
+#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */
+#define PCI_PREF_LIMIT_UPPER32 0x2c
+#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */
+#define PCI_IO_LIMIT_UPPER16 0x32
+/* 0x34 same as for htype 0 */
+/* 0x35-0x3b is reserved */
+#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_BRIDGE_CONTROL 0x3e
+#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */
+#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */
+#define PCI_BRIDGE_CTL_NO_ISA 0x04 /* Disable bridging of ISA ports */
+#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */
+#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */
+#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */
+#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */
+
+/* Header type 2 (CardBus bridges) */
+#define PCI_CB_CAPABILITY_LIST 0x14
+/* 0x15 reserved */
+#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */
+#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */
+#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */
+#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */
+#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */
+#define PCI_CB_MEMORY_BASE_0 0x1c
+#define PCI_CB_MEMORY_LIMIT_0 0x20
+#define PCI_CB_MEMORY_BASE_1 0x24
+#define PCI_CB_MEMORY_LIMIT_1 0x28
+#define PCI_CB_IO_BASE_0 0x2c
+#define PCI_CB_IO_BASE_0_HI 0x2e
+#define PCI_CB_IO_LIMIT_0 0x30
+#define PCI_CB_IO_LIMIT_0_HI 0x32
+#define PCI_CB_IO_BASE_1 0x34
+#define PCI_CB_IO_BASE_1_HI 0x36
+#define PCI_CB_IO_LIMIT_1 0x38
+#define PCI_CB_IO_LIMIT_1_HI 0x3a
+#define PCI_CB_IO_RANGE_MASK ~0x03
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_CB_BRIDGE_CONTROL 0x3e
+#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */
+#define PCI_CB_BRIDGE_CTL_SERR 0x02
+#define PCI_CB_BRIDGE_CTL_ISA 0x04
+#define PCI_CB_BRIDGE_CTL_VGA 0x08
+#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20
+#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */
+#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */
+#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */
+#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
+#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400
+#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40
+#define PCI_CB_SUBSYSTEM_ID 0x42
+#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */
+/* 0x48-0x7f reserved */
+
+/* Capability lists */
+
+#define PCI_CAP_LIST_ID 0 /* Capability ID */
+#define PCI_CAP_ID_PM 0x01 /* Power Management */
+#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */
+#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */
+#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */
+#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */
+#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
+#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
+#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
+#define PCI_CAP_SIZEOF 4
+
+/* Power Management Registers */
+
+#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */
+#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */
+#define PCI_PM_CAP_AUX_POWER 0x0010 /* Auxilliary power support */
+#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */
+#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */
+#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */
+#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */
+#define PCI_PM_CTRL 4 /* PM control and status register */
+#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */
+#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */
+#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */
+#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */
+#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */
+#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */
+#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */
+#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */
+#define PCI_PM_DATA_REGISTER 7 /* (??) */
+#define PCI_PM_SIZEOF 8
+
+/* AGP registers */
+
+#define PCI_AGP_VERSION 2 /* BCD version number */
+#define PCI_AGP_RFU 3 /* Rest of capability flags */
+#define PCI_AGP_STATUS 4 /* Status register */
+#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */
+#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */
+#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */
+#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */
+#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */
+#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */
+#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */
+#define PCI_AGP_COMMAND 8 /* Control register */
+#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */
+#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */
+#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */
+#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
+#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
+#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
+#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 4x rate */
+#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 4x rate */
+#define PCI_AGP_SIZEOF 12
+
+/* Slot Identification */
+
+#define PCI_SID_ESR 2 /* Expansion Slot Register */
+#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */
+#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */
+#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */
+
+/* Message Signalled Interrupts registers */
+
+#define PCI_MSI_FLAGS 2 /* Various flags */
+#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */
+#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */
+#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */
+#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */
+#define PCI_MSI_RFU 3 /* Rest of capability flags */
+#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
+#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
+#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */
+#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */
+
+#define PCI_MAX_PCI_DEVICES 32
+#define PCI_MAX_PCI_FUNCTIONS 8
+
+/* Include the ID list */
+
+#include <pci_ids.h>
+
+struct pci_region {
+ unsigned long bus_start; /* Start on the bus */
+ unsigned long phys_start; /* Start in physical address space */
+ unsigned long size; /* Size */
+ unsigned long flags; /* Resource flags */
+
+ unsigned long bus_lower;
+};
+
+#define PCI_REGION_MEM 0x00000000 /* PCI memory space */
+#define PCI_REGION_IO 0x00000001 /* PCI IO space */
+#define PCI_REGION_TYPE 0x00000001
+
+#define PCI_REGION_MEMORY 0x00000100 /* System memory */
+#define PCI_REGION_RO 0x00000200 /* Read-only memory */
+
+extern __inline__ void pci_set_region(struct pci_region *reg,
+ unsigned long bus_start,
+ unsigned long phys_start,
+ unsigned long size,
+ unsigned long flags) {
+ reg->bus_start = bus_start;
+ reg->phys_start = phys_start;
+ reg->size = size;
+ reg->flags = flags;
+}
+
+typedef int pci_dev_t;
+
+#define PCI_BUS(d) (((d) >> 16) & 0xff)
+#define PCI_DEV(d) (((d) >> 11) & 0x1f)
+#define PCI_FUNC(d) (((d) >> 8) & 0x7)
+#define PCI_BDF(b,d,f) ((b) << 16 | (d) << 11 | (f) << 8)
+
+#define PCI_ANY_ID (~0)
+
+struct pci_device_id {
+ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
+};
+
+struct pci_controller;
+
+struct pci_config_table {
+ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
+ unsigned int class; /* Class ID, or PCI_ANY_ID */
+ unsigned int bus; /* Bus number, or PCI_ANY_ID */
+ unsigned int dev; /* Device number, or PCI_ANY_ID */
+ unsigned int func; /* Function number, or PCI_ANY_ID */
+
+ void (*config_device)(struct pci_controller* hose, pci_dev_t dev,
+ struct pci_config_table *);
+ unsigned long priv[3];
+};
+
+extern void pci_cfgfunc_nothing(struct pci_controller* hose, pci_dev_t dev,
+ struct pci_config_table *);
+extern void pci_cfgfunc_config_device(struct pci_controller* hose, pci_dev_t dev,
+ struct pci_config_table *);
+
+#define MAX_PCI_REGIONS 7
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+ struct pci_controller *next;
+
+ int first_busno;
+ int last_busno;
+
+ volatile unsigned int *cfg_addr;
+ volatile unsigned char *cfg_data;
+
+ struct pci_region regions[MAX_PCI_REGIONS];
+ int region_count;
+
+ struct pci_config_table *config_table;
+
+ void (*fixup_irq)(struct pci_controller *, pci_dev_t);
+
+ /* Low-level architecture-dependent routines */
+ int (*read_byte)(struct pci_controller*, pci_dev_t, int where, u8 *);
+ int (*read_word)(struct pci_controller*, pci_dev_t, int where, u16 *);
+ int (*read_dword)(struct pci_controller*, pci_dev_t, int where, u32 *);
+ int (*write_byte)(struct pci_controller*, pci_dev_t, int where, u8);
+ int (*write_word)(struct pci_controller*, pci_dev_t, int where, u16);
+ int (*write_dword)(struct pci_controller*, pci_dev_t, int where, u32);
+
+ /* Used by auto config */
+ struct pci_region *pci_mem, *pci_io;
+
+ /* Used by ppc405 autoconfig*/
+ struct pci_region *pci_fb;
+};
+
+extern __inline__ void pci_set_ops(struct pci_controller *hose,
+ int (*read_byte)(struct pci_controller*,
+ pci_dev_t, int where, u8 *),
+ int (*read_word)(struct pci_controller*,
+ pci_dev_t, int where, u16 *),
+ int (*read_dword)(struct pci_controller*,
+ pci_dev_t, int where, u32 *),
+ int (*write_byte)(struct pci_controller*,
+ pci_dev_t, int where, u8),
+ int (*write_word)(struct pci_controller*,
+ pci_dev_t, int where, u16),
+ int (*write_dword)(struct pci_controller*,
+ pci_dev_t, int where, u32)) {
+ hose->read_byte = read_byte;
+ hose->read_word = read_word;
+ hose->read_dword = read_dword;
+ hose->write_byte = write_byte;
+ hose->write_word = write_word;
+ hose->write_dword = write_dword;
+}
+
+extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data);
+
+extern unsigned long pci_hose_bus_to_phys(struct pci_controller* hose,
+ unsigned long addr, unsigned long flags);
+extern unsigned long pci_hose_phys_to_bus(struct pci_controller* hose,
+ unsigned long addr, unsigned long flags);
+
+#define pci_phys_to_bus(dev, addr, flags) \
+ pci_hose_phys_to_bus(pci_bus_to_hose(PCI_BUS(dev)), (addr), (flags))
+#define pci_bus_to_phys(dev, addr, flags) \
+ pci_hose_bus_to_phys(pci_bus_to_hose(PCI_BUS(dev)), (addr), (flags))
+
+#define pci_phys_to_mem(dev, addr) pci_phys_to_bus((dev), (addr), PCI_REGION_MEM)
+#define pci_mem_to_phys(dev, addr) pci_bus_to_phys((dev), (addr), PCI_REGION_MEM)
+#define pci_phys_to_io(dev, addr) pci_phys_to_bus((dev), (addr), PCI_REGION_IO)
+#define pci_io_to_phys(dev, addr) pci_bus_to_phys((dev), (addr), PCI_REGION_IO)
+
+extern int pci_hose_read_config_byte(struct pci_controller *hose,
+ pci_dev_t dev, int where, u8 *val);
+extern int pci_hose_read_config_word(struct pci_controller *hose,
+ pci_dev_t dev, int where, u16 *val);
+extern int pci_hose_read_config_dword(struct pci_controller *hose,
+ pci_dev_t dev, int where, u32 *val);
+extern int pci_hose_write_config_byte(struct pci_controller *hose,
+ pci_dev_t dev, int where, u8 val);
+extern int pci_hose_write_config_word(struct pci_controller *hose,
+ pci_dev_t dev, int where, u16 val);
+extern int pci_hose_write_config_dword(struct pci_controller *hose,
+ pci_dev_t dev, int where, u32 val);
+
+extern int pci_read_config_byte(pci_dev_t dev, int where, u8 *val);
+extern int pci_read_config_word(pci_dev_t dev, int where, u16 *val);
+extern int pci_read_config_dword(pci_dev_t dev, int where, u32 *val);
+extern int pci_write_config_byte(pci_dev_t dev, int where, u8 val);
+extern int pci_write_config_word(pci_dev_t dev, int where, u16 val);
+extern int pci_write_config_dword(pci_dev_t dev, int where, u32 val);
+
+extern int pci_hose_read_config_byte_via_dword(struct pci_controller *hose,
+ pci_dev_t dev, int where, u8 *val);
+extern int pci_hose_read_config_word_via_dword(struct pci_controller *hose,
+ pci_dev_t dev, int where, u16 *val);
+extern int pci_hose_write_config_byte_via_dword(struct pci_controller *hose,
+ pci_dev_t dev, int where, u8 val);
+extern int pci_hose_write_config_word_via_dword(struct pci_controller *hose,
+ pci_dev_t dev, int where, u16 val);
+
+extern void pci_register_hose(struct pci_controller* hose);
+extern struct pci_controller* pci_bus_to_hose(int bus);
+
+extern int pci_hose_scan(struct pci_controller *hose);
+extern int pci_hose_scan_bus(struct pci_controller *hose, int bus);
+
+extern void pciauto_region_init(struct pci_region* res);
+extern void pciauto_region_align(struct pci_region *res, unsigned long size);
+extern int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar);
+extern void pciauto_setup_device(struct pci_controller *hose,
+ pci_dev_t dev, int bars_num,
+ struct pci_region *mem,
+ struct pci_region *io);
+void pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
+
+extern pci_dev_t pci_find_device (unsigned int vendor, unsigned int device, int index);
+extern pci_dev_t pci_find_devices (struct pci_device_id *ids, int index);
+
+extern int pci_hose_config_device(struct pci_controller *hose,
+ pci_dev_t dev,
+ unsigned long io,
+ unsigned long mem,
+ unsigned long command);
+
+#ifdef CONFIG_MPC824X
+extern void pci_mpc824x_init (struct pci_controller *hose);
+#endif
+
+#endif /* _PCI_H */
diff --git a/include/smiLynxEM.h b/include/smiLynxEM.h
new file mode 100644
index 0000000..cdd2f24
--- /dev/null
+++ b/include/smiLynxEM.h
@@ -0,0 +1,179 @@
+/*
+ * (C) Copyright 1997-2002 ELTEC Elektronik AG
+ * Frank Gottschling <fgottschling@eltec.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * smiLynxEM.h
+ * Silicon Motion graphic interface for sm810/sm710/sm712 accelerator
+ *
+ *
+ * modification history
+ * --------------------
+ * 04-18-2002 Rewritten for U-Boot <fgottschling@eltec.de>.
+ */
+
+#ifndef _SMI_LYNX_EM_H_
+#define _SMI_LYNX_EM_H_
+
+/*
+ * SMI 710/712 have 4MB internal RAM; SMI 810 2MB internal + 2MB external
+ */
+#define VIDEO_MEM_SIZE 0x400000
+
+/*
+ * Supported video modes for SMI Lynx E/EM/EM+
+ */
+#define VIDEO_MODES 7
+#define DUAL_800_600 0 /* SMI710:VGA1:75Hz (pitch=1600) */
+ /* VGA2:60/120Hz (pitch=1600) */
+ /* SMI810:VGA1:75Hz (pitch=1600) */
+ /* VGA2:75Hz (pitch=1600) */
+#define DUAL_1024_768 1 /* VGA1:75Hz VGA2:73Hz (pitch=2048) */
+#define SINGLE_800_600 2 /* VGA1:75Hz (pitch=800) */
+#define SINGLE_1024_768 3 /* VGA1:75Hz (pitch=1024) */
+#define SINGLE_1280_1024 4 /* VGA1:75Hz (pitch=1280) */
+#define TV_MODE_CCIR 5 /* VGA1:50Hz (h=720;v=576;pitch=720) */
+#define TV_MODE_EIA 6 /* VGA1:60Hz (h=720;v=484;pitch=720) */
+
+
+/*
+ * ISA mapped regs
+ */
+#define SMI_INDX_C4 (pGD->isaBase + 0x03c4) /* index reg */
+#define SMI_DATA_C5 (pGD->isaBase + 0x03c5) /* data reg */
+#define SMI_INDX_D4 (pGD->isaBase + 0x03d4) /* index reg */
+#define SMI_DATA_D5 (pGD->isaBase + 0x03d5) /* data reg */
+#define SMI_INDX_CE (pGD->isaBase + 0x03ce) /* index reg */
+#define SMI_DATA_CF (pGD->isaBase + 0x03cf) /* data reg */
+#define SMI_LOCK_REG (pGD->isaBase + 0x03c3) /* unlock/lock ext crt reg */
+#define SMI_MISC_REG (pGD->isaBase + 0x03c2) /* misc reg */
+#define SMI_LUT_MASK (pGD->isaBase + 0x03c6) /* lut mask reg */
+#define SMI_LUT_START (pGD->isaBase + 0x03c8) /* lut start index */
+#define SMI_LUT_RGB (pGD->isaBase + 0x03c9) /* lut colors auto incr.*/
+
+
+/*
+ * Video processor control
+ */
+typedef struct {
+ unsigned int control;
+ unsigned int colorKey;
+ unsigned int colorKeyMask;
+ unsigned int start;
+ unsigned short offset;
+ unsigned short width;
+ unsigned int fifoPrio;
+ unsigned int fifoERL;
+ unsigned int YUVtoRGB;
+} SmiVideoProc;
+
+/*
+ * Video window control
+ */
+typedef struct {
+ unsigned short top;
+ unsigned short left;
+ unsigned short bottom;
+ unsigned short right;
+ unsigned int srcStart;
+ unsigned short width;
+ unsigned short offset;
+ unsigned char hStretch;
+ unsigned char vStretch;
+} SmiVideoWin;
+
+/*
+ * Capture port control
+ */
+typedef struct {
+ unsigned int control;
+ unsigned short topClip;
+ unsigned short leftClip;
+ unsigned short srcHeight;
+ unsigned short srcWidth;
+ unsigned int srcBufStart1;
+ unsigned int srcBufStart2;
+ unsigned short srcOffset;
+ unsigned short fifoControl;
+} SmiCapturePort;
+
+
+/******************************************************************************/
+/* Export Graphic Driver Control */
+/******************************************************************************/
+
+typedef struct {
+ unsigned int isaBase;
+ unsigned int pciBase;
+ unsigned int dprBase;
+ unsigned int vprBase;
+ unsigned int cprBase;
+ unsigned int frameAdrs;
+ unsigned int memSize;
+ unsigned int mode;
+ unsigned int gdfIndex;
+ unsigned int gdfBytesPP;
+ unsigned int fg;
+ unsigned int bg;
+ unsigned int plnSizeX;
+ unsigned int plnSizeY;
+ unsigned int winSizeX;
+ unsigned int winSizeY;
+ char modeIdent[80];
+} GraphicDevice;
+
+extern GraphicDevice smi;
+
+
+/******************************************************************************/
+/* Export Graphic Functions */
+/******************************************************************************/
+
+void *video_hw_init (void); /* returns GraphicDevice struct or NULL */
+
+void video_hw_bitblt (
+ unsigned int bpp, /* bytes per pixel */
+ unsigned int src_x, /* source pos x */
+ unsigned int src_y, /* source pos y */
+ unsigned int dst_x, /* dest pos x */
+ unsigned int dst_y, /* dest pos y */
+ unsigned int dim_x, /* frame width */
+ unsigned int dim_y /* frame height */
+ );
+
+void video_hw_rectfill (
+ unsigned int bpp, /* bytes per pixel */
+ unsigned int dst_x, /* dest pos x */
+ unsigned int dst_y, /* dest pos y */
+ unsigned int dim_x, /* frame width */
+ unsigned int dim_y, /* frame height */
+ unsigned int color /* fill color */
+ );
+
+void video_set_lut (
+ unsigned int index, /* color number */
+ unsigned char r, /* red */
+ unsigned char g, /* green */
+ unsigned char b /* blue */
+ );
+
+#endif /*_SMI_LYNX_EM_H_ */
diff --git a/include/spartan2.h b/include/spartan2.h
new file mode 100644
index 0000000..42806e3
--- /dev/null
+++ b/include/spartan2.h
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _SPARTAN2_H_
+#define _SPARTAN2_H_
+
+#include <xilinx.h>
+
+extern int Spartan2_load( Xilinx_desc *desc, void *image, size_t size );
+extern int Spartan2_dump( Xilinx_desc *desc, void *buf, size_t bsize );
+extern int Spartan2_info( Xilinx_desc *desc );
+extern int Spartan2_reloc( Xilinx_desc *desc, ulong reloc_off );
+
+/* Slave Parallel Implementation function table */
+typedef struct {
+ Xilinx_pre_fn pre;
+ Xilinx_pgm_fn pgm;
+ Xilinx_init_fn init;
+ Xilinx_err_fn err;
+ Xilinx_done_fn done;
+ Xilinx_clk_fn clk;
+ Xilinx_cs_fn cs;
+ Xilinx_wr_fn wr;
+ Xilinx_rdata_fn rdata;
+ Xilinx_wdata_fn wdata;
+ Xilinx_busy_fn busy;
+ Xilinx_abort_fn abort;
+ Xilinx_post_fn post;
+ int relocated;
+} Xilinx_Spartan2_Slave_Parallel_fns;
+
+/* Slave Serial Implementation function table */
+typedef struct {
+ Xilinx_pgm_fn pgm;
+ Xilinx_clk_fn clk;
+ Xilinx_rdata_fn rdata;
+ Xilinx_wdata_fn wdata;
+ int relocated;
+} Xilinx_Spartan2_Slave_Serial_fns;
+
+/* Device Image Sizes
+ *********************************************************************/
+/* Spartan-II (2.5V) */
+#define XILINX_XC2S15_SIZE 197728/8
+#define XILINX_XC2S30_SIZE 336800/8
+#define XILINX_XC2S50_SIZE 559232/8
+#define XILINX_XC2S100_SIZE 781248/8
+#define XILINX_XC2S150_SIZE 1040128/8
+
+/* Descriptor Macros
+ *********************************************************************/
+/* Spartan-II devices */
+#define XILINX_XC2S15_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan2, iface, XILINX_XC2S15_SIZE, fn_table, cookie }
+
+#define XILINX_XC2S30_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan2, iface, XILINX_XC2S30_SIZE, fn_table, cookie }
+
+#define XILINX_XC2S50_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan2, iface, XILINX_XC2S50_SIZE, fn_table, cookie }
+
+#define XILINX_XC2S100_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan2, iface, XILINX_XC2S100_SIZE, fn_table, cookie }
+
+#define XILINX_XC2S150_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan2, iface, XILINX_XC2S150_SIZE, fn_table, cookie }
+
+#endif /* _SPARTAN2_H_ */
+
diff --git a/include/status_led.h b/include/status_led.h
new file mode 100644
index 0000000..9b2de3e
--- /dev/null
+++ b/include/status_led.h
@@ -0,0 +1,263 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * The purpose of this code is to signal the operational status of a
+ * target which usually boots over the network; while running in
+ * PCBoot, a status LED is blinking. As soon as a valid BOOTP reply
+ * message has been received, the LED is turned off. The Linux
+ * kernel, once it is running, will start blinking the LED again,
+ * with another frequency.
+ */
+
+#ifndef _STATUS_LED_H_
+#define _STATUS_LED_H_
+
+#ifdef CONFIG_STATUS_LED
+
+#define STATUS_LED_OFF 0
+#define STATUS_LED_BLINKING 1
+#define STATUS_LED_ON 2
+
+void status_led_tick (unsigned long timestamp);
+void status_led_set (int led, int state);
+
+/***** TQM8xxL ********************************************************/
+#if defined(CONFIG_TQM8xxL)
+# define STATUS_LED_PAR im_cpm.cp_pbpar
+# define STATUS_LED_DIR im_cpm.cp_pbdir
+# define STATUS_LED_ODR im_cpm.cp_pbodr
+# define STATUS_LED_DAT im_cpm.cp_pbdat
+
+# define STATUS_LED_BIT 0x00000001
+# define STATUS_LED_PERIOD (CFG_HZ / 2)
+# define STATUS_LED_STATE STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
+
+# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+
+/***** MVS v1 **********************************************************/
+#elif (defined(CONFIG_MVS) && CONFIG_MVS < 2)
+# define STATUS_LED_PAR im_ioport.iop_pdpar
+# define STATUS_LED_DIR im_ioport.iop_pddir
+# undef STATUS_LED_ODR
+# define STATUS_LED_DAT im_ioport.iop_pddat
+
+# define STATUS_LED_BIT 0x00000001
+# define STATUS_LED_PERIOD (CFG_HZ / 2)
+# define STATUS_LED_STATE STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
+
+# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+
+/***** ETX_094 ********************************************************/
+#elif defined(CONFIG_ETX094)
+
+# define STATUS_LED_PAR im_ioport.iop_pdpar
+# define STATUS_LED_DIR im_ioport.iop_pddir
+# undef STATUS_LED_ODR
+# define STATUS_LED_DAT im_ioport.iop_pddat
+
+# define STATUS_LED_BIT 0x00000001
+# define STATUS_LED_PERIOD (CFG_HZ / 2)
+# define STATUS_LED_STATE STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
+
+# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+
+/***** GEN860T *********************************************************/
+#elif defined(CONFIG_GEN860T)
+
+# define STATUS_LED_PAR im_ioport.iop_papar
+# define STATUS_LED_DIR im_ioport.iop_padir
+# define STATUS_LED_ODR im_ioport.iop_paodr
+# define STATUS_LED_DAT im_ioport.iop_padat
+
+# define STATUS_LED_BIT 0x0800 /* Red LED 0 is on PA.4 */
+# define STATUS_LED_PERIOD (CFG_HZ / 2)
+# define STATUS_LED_STATE STATUS_LED_BLINKING
+# define STATUS_LED_BIT1 0x0400 /* Grn LED 1 is on PA.5 */
+# define STATUS_LED_PERIOD1 (CFG_HZ / 2)
+# define STATUS_LED_STATE1 STATUS_LED_BLINKING
+# define STATUS_LED_BIT2 0x0080 /* Red LED 2 is on PA.8 */
+# define STATUS_LED_PERIOD2 (CFG_HZ / 2)
+# define STATUS_LED_STATE2 STATUS_LED_BLINKING
+# define STATUS_LED_BIT3 0x0040 /* Grn LED 3 is on PA.9 */
+# define STATUS_LED_PERIOD3 (CFG_HZ / 2)
+# define STATUS_LED_STATE3 STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
+# define STATUS_LED_BOOT 0 /* Boot status on LED 1 */
+
+/***** IVMS8 **********************************************************/
+#elif defined(CONFIG_IVMS8)
+
+# define STATUS_LED_PAR im_cpm.cp_pbpar
+# define STATUS_LED_DIR im_cpm.cp_pbdir
+# define STATUS_LED_ODR im_cpm.cp_pbodr
+# define STATUS_LED_DAT im_cpm.cp_pbdat
+
+# define STATUS_LED_BIT 0x00000010 /* LED 0 is on PB.27 */
+# define STATUS_LED_PERIOD (1 * CFG_HZ)
+# define STATUS_LED_STATE STATUS_LED_OFF
+# define STATUS_LED_BIT1 0x00000020 /* LED 1 is on PB.26 */
+# define STATUS_LED_PERIOD1 (1 * CFG_HZ)
+# define STATUS_LED_STATE1 STATUS_LED_OFF
+/* IDE LED usable for other purposes, too */
+# define STATUS_LED_BIT2 0x00000008 /* LED 2 is on PB.28 */
+# define STATUS_LED_PERIOD2 (1 * CFG_HZ)
+# define STATUS_LED_STATE2 STATUS_LED_OFF
+
+# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
+
+# define STATUS_ILOCK_SWITCH 0x00800000 /* ILOCK switch in IRQ4 */
+
+# define STATUS_ILOCK_PERIOD (CFG_HZ / 10) /* about every 100 ms */
+
+# define STATUS_LED_YELLOW 0
+# define STATUS_LED_GREEN 1
+# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */
+
+/***** IVML24 *********************************************************/
+#elif defined(CONFIG_IVML24)
+
+# define STATUS_LED_PAR im_cpm.cp_pbpar
+# define STATUS_LED_DIR im_cpm.cp_pbdir
+# define STATUS_LED_ODR im_cpm.cp_pbodr
+# define STATUS_LED_DAT im_cpm.cp_pbdat
+
+# define STATUS_LED_BIT 0x00000010 /* LED 0 is on PB.27 */
+# define STATUS_LED_PERIOD (1 * CFG_HZ)
+# define STATUS_LED_STATE STATUS_LED_OFF
+# define STATUS_LED_BIT1 0x00000020 /* LED 1 is on PB.26 */
+# define STATUS_LED_PERIOD1 (1 * CFG_HZ)
+# define STATUS_LED_STATE1 STATUS_LED_OFF
+/* IDE LED usable for other purposes, too */
+# define STATUS_LED_BIT2 0x00000008 /* LED 2 is on PB.28 */
+# define STATUS_LED_PERIOD2 (1 * CFG_HZ)
+# define STATUS_LED_STATE2 STATUS_LED_OFF
+
+# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
+
+# define STATUS_ILOCK_SWITCH 0x00004000 /* ILOCK is on PB.17 */
+
+# define STATUS_ILOCK_PERIOD (CFG_HZ / 10) /* about every 100 ms */
+
+# define STATUS_LED_YELLOW 0
+# define STATUS_LED_GREEN 1
+# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */
+
+/***** LANTEC *********************************************************/
+#elif defined(CONFIG_LANTEC)
+
+# define STATUS_LED_PAR im_ioport.iop_pdpar
+# define STATUS_LED_DIR im_ioport.iop_pddir
+# undef STATUS_LED_ODR
+# define STATUS_LED_DAT im_ioport.iop_pddat
+
+# if CONFIG_LATEC < 2
+# define STATUS_LED_BIT 0x1000
+# else
+# define STATUS_LED_BIT 0x0800
+# endif
+# define STATUS_LED_PERIOD (CFG_HZ / 2)
+# define STATUS_LED_STATE STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
+
+# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+
+/***** PCU E and CCM ************************************************/
+#elif (defined(CONFIG_PCU_E) || defined(CONFIG_CCM))
+
+# define STATUS_LED_PAR im_cpm.cp_pbpar
+# define STATUS_LED_DIR im_cpm.cp_pbdir
+# define STATUS_LED_ODR im_cpm.cp_pbodr
+# define STATUS_LED_DAT im_cpm.cp_pbdat
+
+# define STATUS_LED_BIT 0x00010000 /* green LED is on PB.15 */
+# define STATUS_LED_PERIOD (CFG_HZ / 2)
+# define STATUS_LED_STATE STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
+
+# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+
+/***** ICU862 ********************************************************/
+#elif defined(CONFIG_ICU862)
+
+# define STATUS_LED_PAR im_ioport.iop_papar
+# define STATUS_LED_DIR im_ioport.iop_padir
+# define STATUS_LED_ODR im_ioport.iop_paodr
+# define STATUS_LED_DAT im_ioport.iop_padat
+
+# define STATUS_LED_BIT 0x4000 /* LED 0 is on PA.1 */
+# define STATUS_LED_PERIOD (CFG_HZ / 2)
+# define STATUS_LED_STATE STATUS_LED_BLINKING
+# define STATUS_LED_BIT1 0x1000 /* LED 1 is on PA.3 */
+# define STATUS_LED_PERIOD1 (CFG_HZ)
+# define STATUS_LED_STATE1 STATUS_LED_OFF
+
+# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
+
+# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+
+/***** Someone else defines these *************************************/
+#elif defined(STATUS_LED_PAR)
+
+ /*
+ * ADVICE: Define in your board configuration file rather than
+ * filling this file up with lots of custom board stuff.
+ */
+
+/***** NetVia ********************************************************/
+#elif defined(CONFIG_NETVIA)
+
+#define STATUS_LED_PAR im_ioport.iop_pdpar
+#define STATUS_LED_DIR im_ioport.iop_pddir
+#undef STATUS_LED_ODR
+#define STATUS_LED_DAT im_ioport.iop_pddat
+
+# define STATUS_LED_BIT 0x0080 /* PD.8 */
+# define STATUS_LED_PERIOD (CFG_HZ / 2)
+# define STATUS_LED_STATE STATUS_LED_BLINKING
+
+# define STATUS_LED_BIT1 0x0040 /* PD.9 */
+# define STATUS_LED_PERIOD1 (CFG_HZ / 2)
+# define STATUS_LED_STATE1 STATUS_LED_OFF
+
+# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
+# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+
+/************************************************************************/
+#else
+# error Status LED configuration missing
+#endif
+/************************************************************************/
+
+#endif /* CONFIG_STATUS_LED */
+
+#endif /* _STATUS_LED_H_ */
diff --git a/include/video_fb.h b/include/video_fb.h
new file mode 100644
index 0000000..a9e4275
--- /dev/null
+++ b/include/video_fb.h
@@ -0,0 +1,115 @@
+ /*
+ * (C) Copyright 1997-2002 ELTEC Elektronik AG
+ * Frank Gottschling <fgottschling@eltec.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * smiLynxEM.h
+ * Silicon Motion graphic interface for sm810/sm710/sm712 accelerator
+ *
+ *
+ * modification history
+ * --------------------
+ * 04-18-2002 Rewritten for U-Boot <fgottschling@eltec.de>.
+ */
+
+#ifndef _VIDEO_FB_H_
+#define _VIDEO_FB_H_
+
+#define CONSOLE_BG_COL 0x00
+#define CONSOLE_FG_COL 0xa0
+
+/*
+ * Graphic Data Format (GDF) bits for VIDEO_DATA_FORMAT
+ */
+#define GDF__8BIT_INDEX 0
+#define GDF_15BIT_555RGB 1
+#define GDF_16BIT_565RGB 2
+#define GDF_32BIT_X888RGB 3
+#define GDF_24BIT_888RGB 4
+#define GDF__8BIT_332RGB 5
+
+/******************************************************************************/
+/* Export Graphic Driver Control */
+/******************************************************************************/
+
+typedef struct {
+ unsigned int isaBase;
+ unsigned int pciBase;
+ unsigned int dprBase;
+ unsigned int vprBase;
+ unsigned int cprBase;
+ unsigned int frameAdrs;
+ unsigned int memSize;
+ unsigned int mode;
+ unsigned int gdfIndex;
+ unsigned int gdfBytesPP;
+ unsigned int fg;
+ unsigned int bg;
+ unsigned int plnSizeX;
+ unsigned int plnSizeY;
+ unsigned int winSizeX;
+ unsigned int winSizeY;
+ char modeIdent[80];
+} GraphicDevice;
+
+
+/******************************************************************************/
+/* Export Graphic Functions */
+/******************************************************************************/
+
+void *video_hw_init (void); /* returns GraphicDevice struct or NULL */
+
+#ifdef VIDEO_HW_BITBLT
+void video_hw_bitblt (
+ unsigned int bpp, /* bytes per pixel */
+ unsigned int src_x, /* source pos x */
+ unsigned int src_y, /* source pos y */
+ unsigned int dst_x, /* dest pos x */
+ unsigned int dst_y, /* dest pos y */
+ unsigned int dim_x, /* frame width */
+ unsigned int dim_y /* frame height */
+ );
+#endif
+
+#ifdef VIDEO_HW_RECTFILL
+void video_hw_rectfill (
+ unsigned int bpp, /* bytes per pixel */
+ unsigned int dst_x, /* dest pos x */
+ unsigned int dst_y, /* dest pos y */
+ unsigned int dim_x, /* frame width */
+ unsigned int dim_y, /* frame height */
+ unsigned int color /* fill color */
+ );
+#endif
+
+void video_set_lut (
+ unsigned int index, /* color number */
+ unsigned char r, /* red */
+ unsigned char g, /* green */
+ unsigned char b /* blue */
+ );
+#ifdef CONFIG_VIDEO_HW_CURSOR
+void video_set_hw_cursor(int x, int y); /* x y in pixel */
+void video_init_hw_cursor(int font_width, int font_height);
+#endif
+
+#endif /*_VIDEO_FB_H_ */
diff --git a/include/virtex2.h b/include/virtex2.h
new file mode 100644
index 0000000..f59227b
--- /dev/null
+++ b/include/virtex2.h
@@ -0,0 +1,120 @@
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ * Keith Outwater, keith_outwater@mvis.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _VIRTEX2_H_
+#define _VIRTEX2_H_
+
+#include <xilinx.h>
+
+extern int Virtex2_load( Xilinx_desc *desc, void *image, size_t size );
+extern int Virtex2_dump( Xilinx_desc *desc, void *buf, size_t bsize );
+extern int Virtex2_info( Xilinx_desc *desc );
+extern int Virtex2_reloc( Xilinx_desc *desc, ulong reloc_off );
+
+/*
+ * Slave SelectMap Implementation function table.
+ */
+typedef struct {
+ Xilinx_pre_fn pre;
+ Xilinx_pgm_fn pgm;
+ Xilinx_init_fn init;
+ Xilinx_err_fn err;
+ Xilinx_done_fn done;
+ Xilinx_clk_fn clk;
+ Xilinx_cs_fn cs;
+ Xilinx_wr_fn wr;
+ Xilinx_rdata_fn rdata;
+ Xilinx_wdata_fn wdata;
+ Xilinx_busy_fn busy;
+ Xilinx_abort_fn abort;
+ Xilinx_post_fn post;
+ int relocated;
+} Xilinx_Virtex2_Slave_SelectMap_fns;
+
+/* Slave Serial Implementation function table */
+typedef struct {
+ Xilinx_pgm_fn pgm;
+ Xilinx_clk_fn clk;
+ Xilinx_rdata_fn rdata;
+ Xilinx_wdata_fn wdata;
+ int relocated;
+} Xilinx_Virtex2_Slave_Serial_fns;
+
+/* Device Image Sizes (in bytes)
+ *********************************************************************/
+#define XILINX_XC2V40_SIZE (338208 / 8)
+#define XILINX_XC2V80_SIZE (597408 / 8)
+#define XILINX_XC2V250_SIZE (1591584 / 8)
+#define XILINX_XC2V500_SIZE (2557857 / 8)
+#define XILINX_XC2V1000_SIZE (3749408 / 8)
+#define XILINX_XC2V1500_SIZE (5166240 / 8)
+#define XILINX_XC2V2000_SIZE (6808352 / 8)
+#define XILINX_XC2V3000_SIZE (9589408 / 8)
+#define XILINX_XC2V4000_SIZE (14220192 / 8)
+#define XILINX_XC2V6000_SIZE (19752096 / 8)
+#define XILINX_XC2V8000_SIZE (26185120 / 8)
+#define XILINX_XC2V10000_SIZE (33519264 / 8)
+
+/* Descriptor Macros
+ *********************************************************************/
+#define XILINX_XC2V40_DESC(iface, fn_table, cookie) \
+{ Xilinx_Virtex2, iface, XILINX_XC2V40_SIZE, fn_table, cookie }
+
+#define XILINX_XC2V80_DESC(iface, fn_table, cookie) \
+{ Xilinx_Virtex2, iface, XILINX_XC2V80_SIZE, fn_table, cookie }
+
+#define XILINX_XC2V250_DESC(iface, fn_table, cookie) \
+{ Xilinx_Virtex2, iface, XILINX_XC2V250_SIZE, fn_table, cookie }
+
+#define XILINX_XC2V500_DESC(iface, fn_table, cookie) \
+{ Xilinx_Virtex2, iface, XILINX_XC2V500_SIZE, fn_table, cookie }
+
+#define XILINX_XC2V1000_DESC(iface, fn_table, cookie) \
+{ Xilinx_Virtex2, iface, XILINX_XC2V1000_SIZE, fn_table, cookie }
+
+#define XILINX_XC2V1500_DESC(iface, fn_table, cookie) \
+{ Xilinx_Virtex2, iface, XILINX_XC2V1500_SIZE, fn_table, cookie }
+
+#define XILINX_XC2V2000_DESC(iface, fn_table, cookie) \
+{ Xilinx_Virtex2, iface, XILINX_XC2V2000_SIZE, fn_table, cookie }
+
+#define XILINX_XC2V3000_DESC(iface, fn_table, cookie) \
+{ Xilinx_Virtex2, iface, XILINX_XC2V3000_SIZE, fn_table, cookie }
+
+#define XILINX_XC2V4000_DESC(iface, fn_table, cookie) \
+{ Xilinx_Virtex2, iface, XILINX_XC2V4000_SIZE, fn_table, cookie }
+
+#define XILINX_XC2V6000_DESC(iface, fn_table, cookie) \
+{ Xilinx_Virtex2, iface, XILINX_XC2V6000_SIZE, fn_table, cookie }
+
+#define XILINX_XC2V8000_DESC(iface, fn_table, cookie) \
+{ Xilinx_Virtex2, iface, XILINX_XC2V8000_SIZE, fn_table, cookie }
+
+#define XILINX_XC2V10000_DESC(iface, fn_table, cookie) \
+{ Xilinx_Virtex2, iface, XILINX_XC2V10000_SIZE, fn_table, cookie }
+
+#endif /* _VIRTEX2_H_ */
+
+/* vim: set ts=4 tw=78: */
diff --git a/include/xilinx.h b/include/xilinx.h
new file mode 100644
index 0000000..b87cfe2
--- /dev/null
+++ b/include/xilinx.h
@@ -0,0 +1,102 @@
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <fpga.h>
+
+#ifndef _XILINX_H_
+#define _XILINX_H_
+
+/* Xilinx Model definitions
+ *********************************************************************/
+#define CFG_SPARTAN2 CFG_FPGA_DEV( 0x1 )
+#define CFG_VIRTEX_E CFG_FPGA_DEV( 0x2 )
+#define CFG_VIRTEX2 CFG_FPGA_DEV( 0x4 )
+#define CFG_XILINX_SPARTAN2 (CFG_FPGA_XILINX | CFG_SPARTAN2)
+#define CFG_XILINX_VIRTEX_E (CFG_FPGA_XILINX | CFG_VIRTEX_E)
+#define CFG_XILINX_VIRTEX2 (CFG_FPGA_XILINX | CFG_VIRTEX2)
+/* XXX - Add new models here */
+
+
+/* Xilinx Interface definitions
+ *********************************************************************/
+#define CFG_XILINX_IF_SS CFG_FPGA_IF( 0x1 ) /* slave serial */
+#define CFG_XILINX_IF_MS CFG_FPGA_IF( 0x2 ) /* master serial */
+#define CFG_XILINX_IF_SP CFG_FPGA_IF( 0x4 ) /* slave parallel */
+#define CFG_XILINX_IF_JTAG CFG_FPGA_IF( 0x8 ) /* jtag */
+#define CFG_XILINX_IF_MSM CFG_FPGA_IF( 0x10 ) /* master selectmap */
+#define CFG_XILINX_IF_SSM CFG_FPGA_IF( 0x20 ) /* slave selectmap */
+
+/* Xilinx types
+ *********************************************************************/
+typedef enum { /* typedef Xilinx_iface */
+ min_xilinx_iface_type, /* low range check value */
+ slave_serial, /* serial data and external clock */
+ master_serial, /* serial data w/ internal clock (not used) */
+ slave_parallel, /* parallel data w/ external latch */
+ jtag_mode, /* jtag/tap serial (not used ) */
+ master_selectmap, /* master SelectMap (virtex2) */
+ slave_selectmap, /* slave SelectMap (virtex2) */
+ max_xilinx_iface_type /* insert all new types before this */
+} Xilinx_iface; /* end, typedef Xilinx_iface */
+
+typedef enum { /* typedef Xilinx_Family */
+ min_xilinx_type, /* low range check value */
+ Xilinx_Spartan2, /* Spartan-II Family */
+ Xilinx_VirtexE, /* Virtex-E Family */
+ Xilinx_Virtex2, /* Virtex2 Family */
+ max_xilinx_type /* insert all new types before this */
+} Xilinx_Family; /* end, typedef Xilinx_Family */
+
+typedef struct { /* typedef Xilinx_desc */
+ Xilinx_Family family; /* part type */
+ Xilinx_iface iface; /* interface type */
+ size_t size; /* bytes of data part can accept */
+ void * iface_fns; /* interface function table */
+ int cookie; /* implementation specific cookie */
+} Xilinx_desc; /* end, typedef Xilinx_desc */
+
+/* Generic Xilinx Functions
+ *********************************************************************/
+extern int xilinx_load( Xilinx_desc *desc, void *image, size_t size );
+extern int xilinx_dump( Xilinx_desc *desc, void *buf, size_t bsize );
+extern int xilinx_info( Xilinx_desc *desc );
+extern int xilinx_reloc( Xilinx_desc *desc, ulong reloc_offset );
+
+/* Board specific implementation specific function types
+ *********************************************************************/
+typedef int (*Xilinx_pgm_fn)( int assert_pgm, int flush, int cookie );
+typedef int (*Xilinx_init_fn)( int cookie );
+typedef int (*Xilinx_err_fn)( int cookie );
+typedef int (*Xilinx_done_fn)( int cookie );
+typedef int (*Xilinx_clk_fn)( int assert_clk, int flush, int cookie );
+typedef int (*Xilinx_cs_fn)( int assert_cs, int flush, int cookie );
+typedef int (*Xilinx_wr_fn)( int assert_write, int flush, int cookie );
+typedef int (*Xilinx_rdata_fn)( unsigned char *data, int cookie );
+typedef int (*Xilinx_wdata_fn)( unsigned char data, int flush, int cookie );
+typedef int (*Xilinx_busy_fn)( int cookie );
+typedef int (*Xilinx_abort_fn)( int cookie );
+typedef int (*Xilinx_pre_fn)( int cookie );
+typedef int (*Xilinx_post_fn)( int cookie );
+
+#endif /* _XILINX_H_ */
