Merge branch 'master' of git://git.denx.de/u-boot-video
diff --git a/CREDITS b/CREDITS index 3767322..9ddf0d2 100644 --- a/CREDITS +++ b/CREDITS
@@ -407,6 +407,7 @@ E: ricardo.ribalda@uam.es D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval D: Virtex ppc440 generic architecture +D: Virtex ppc405 generic architecture W: http://www.ii.uam.es/~rribalda N: Stefan Roese
diff --git a/MAINTAINERS b/MAINTAINERS index 60cb6a6..260c3e6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS
@@ -320,6 +320,7 @@ ml507 PPC440x5 v5fx30teval PPC440x5 xilinx-pp440-generic PPC440x5 + xilinx-pp405-generic PPC405 Stefan Roese <sr@denx.de> @@ -365,6 +366,10 @@ METROBOX PPC440GX XPEDITE1K PPC440GX +Georg Schardt <schardt@team-ctech.de> + + fx12mm PPC405 + Heiko Schocher <hs@denx.de> ids8247 MPC8247
diff --git a/MAKEALL b/MAKEALL index aa602b7..1f56ac5 100755 --- a/MAKEALL +++ b/MAKEALL
@@ -186,6 +186,7 @@ ebony \ ERIC \ EXBITGEN \ + fx12mm \ G2000 \ glacier \ haleakala \
diff --git a/Makefile b/Makefile index fceb8a2..d6abb4d 100644 --- a/Makefile +++ b/Makefile
@@ -1293,6 +1293,24 @@ EXBITGEN_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen +fx12mm_flash_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic + @mkdir -p $(obj)include $(obj)board/avnet/fx12mm + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ + > $(obj)board/avnet/fx12mm/config.tmp + @echo "TEXT_BASE := 0xFFCB0000" \ + >> $(obj)board/avnet/fx12mm/config.tmp + @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet + +fx12mm_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic + @mkdir -p $(obj)include $(obj)board/avnet/fx12mm + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ + > $(obj)board/avnet/fx12mm/config.tmp + @echo "TEXT_BASE := 0x03000000" \ + >> $(obj)board/avnet/fx12mm/config.tmp + @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet + G2000_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 @@ -1518,6 +1536,22 @@ WUH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd +xilinx-ppc405-generic_flash_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ + > $(obj)board/xilinx/ppc405-generic/config.tmp + @echo "TEXT_BASE := 0xFE360000" \ + >> $(obj)board/xilinx/ppc405-generic/config.tmp + @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx + +xilinx-ppc405-generic_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ + > $(obj)board/xilinx/ppc405-generic/config.tmp + @echo "TEXT_BASE := 0x04000000" \ + >> $(obj)board/xilinx/ppc405-generic/config.tmp + @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx + xilinx-ppc440-generic_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index 2ef19ce..7b7a968 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c
@@ -182,6 +182,9 @@ int first_free_busno=0; +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + void pci_init_board(void) { @@ -211,10 +214,10 @@ #ifdef CONFIG_PCIE1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 5); int pcie_configured = io_sel & 6; + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE1 connected to slot as %s (base address %x)", @@ -227,36 +230,31 @@ printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BASE, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; #ifdef CONFIG_SYS_PCIE1_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, + pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BASE2, CONFIG_SYS_PCIE1_MEM_PHYS2, CONFIG_SYS_PCIE1_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -279,8 +277,8 @@ #ifdef CONFIG_PCI1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci1_hose; + struct pci_region *r = hose->regions; uint pci_agent = (host_agent == 6); uint pci_speed = 33333000; /*get_clock_freq (); PCI PSPEED in [4:5] */ @@ -300,26 +298,22 @@ ); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BASE, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI1_IO_BASE, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -340,26 +334,23 @@ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR; extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci2_hose; + struct pci_region *r = hose->regions; if (!(devdisr & MPC85xx_DEVDISR_PCI2)) { - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI2_MEM_BASE, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM); - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI2_IO_BASE, CONFIG_SYS_PCI2_IO_PHYS, CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -385,39 +376,21 @@ } #if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); -void -ft_board_setup(void *blob, bd_t *bd) +void ft_board_setup(void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; - ft_cpu_setup(blob, bd); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCI2 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pci2_hose); #endif #ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci2", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); #endif - } } #endif
diff --git a/board/avnet/fx12mm/.gitignore b/board/avnet/fx12mm/.gitignore new file mode 100644 index 0000000..b644f59 --- /dev/null +++ b/board/avnet/fx12mm/.gitignore
@@ -0,0 +1 @@ +config.tmp
diff --git a/board/avnet/fx12mm/Makefile b/board/avnet/fx12mm/Makefile new file mode 100644 index 0000000..f943781 --- /dev/null +++ b/board/avnet/fx12mm/Makefile
@@ -0,0 +1,27 @@ +# +# (C) Copyright 2008 +# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es +# This work has been supported by: Qtechnology http://qtec.com/ +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +COBJS += $(BOARD).o + +include $(SRCTREE)/board/xilinx/ppc405-generic/Makefile
diff --git a/board/avnet/fx12mm/config.mk b/board/avnet/fx12mm/config.mk new file mode 100644 index 0000000..f5a6039 --- /dev/null +++ b/board/avnet/fx12mm/config.mk
@@ -0,0 +1,26 @@ +# +# (C) Copyright 2008 +# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es +# Work supported by Qtechnology http://www.qtec.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# + +sinclude $(SRCTREE)/board/xilinx/ppc405-generic/config.mk
diff --git a/board/avnet/fx12mm/fx12mm.c b/board/avnet/fx12mm/fx12mm.c new file mode 100644 index 0000000..4858645 --- /dev/null +++ b/board/avnet/fx12mm/fx12mm.c
@@ -0,0 +1,52 @@ +/* + * (C) Copyright 2008 + * + * Author: Xilinx Inc. + * + * Modified by: + * Georg Schardt <schardt@team-ctech.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <config.h> +#include <common.h> +#include <asm/processor.h> + +int checkboard(void) +{ + char tmp[64]; + char *s, *e; + int i = getenv_r("serial", tmp, sizeof(tmp)); + + if (i < 0) { + printf("Avnet Virtex4 FX12 with no serial #"); + } else { + for (e = tmp; *e; ++e) { + if (*e == ' ') + break; + } + printf("Avnet Virtex4 FX12 Minimodul # "); + for (s = tmp; s < e; ++s) + putc(*s); + } + putc('\n'); + return 0; +}
diff --git a/board/avnet/fx12mm/xparameters.h b/board/avnet/fx12mm/xparameters.h new file mode 100644 index 0000000..f7031b3 --- /dev/null +++ b/board/avnet/fx12mm/xparameters.h
@@ -0,0 +1,51 @@ +/* + * (C) Copyright 2008 + * + * Georg Schardt <schardt@team-ctech.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * CAUTION: This file is based on the xparameters.h automatically + * generated by libgen. Version: Xilinx EDK 10.1.02 Build EDK_K_SP2.5 + */ + +#ifndef __XPARAMETER_H__ +#define __XPARAMETER_H__ + +/* RS232 */ +#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000 +#define XPAR_UARTNS550_0_BASEADDR 0x83E00000 + + +/* INT_C */ +#define XPAR_XPS_INTC_0_DEVICE_ID 0 +#define XPAR_XPS_INTC_0_BASEADDR 0x81800000 +#define XPAR_INTC_MAX_NUM_INTR_INPUTS 2 + +/* CPU core clock */ +#define XPAR_CORE_CLOCK_FREQ_HZ 300000000 +#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 + +/* RAM */ +#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 + +/* FLASH */ +#define XPAR_FLASH_2MX16_MEM0_BASEADDR 0xFFC00000 + +#endif
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index f357826..2978b7d 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -155,6 +155,9 @@ static struct pci_controller pcie3_hose; #endif +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + int first_free_busno=0; void @@ -181,10 +184,10 @@ #ifdef CONFIG_PCIE3 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie3_hose; int pcie_ep = (host_agent == 1); int pcie_configured = (io_sel == 7); + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE3 connected to Slot3 as %s (base address %x)", @@ -197,27 +200,23 @@ printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE3_MEM_BASE, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE3_IO_BASE, CONFIG_SYS_PCIE3_IO_PHYS, CONFIG_SYS_PCIE3_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -239,11 +238,11 @@ #ifdef CONFIG_PCIE1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 5); int pcie_configured = (io_sel == 2 || io_sel == 3 || io_sel == 5 || io_sel == 7); + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE1 connected to Slot1 as %s (base address %x)", @@ -256,36 +255,31 @@ printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BASE, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; #ifdef CONFIG_SYS_PCIE1_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, + pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BASE2, CONFIG_SYS_PCIE1_MEM_PHYS2, CONFIG_SYS_PCIE1_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -308,10 +302,10 @@ #ifdef CONFIG_PCIE2 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie2_hose; int pcie_ep = (host_agent == 3); int pcie_configured = (io_sel == 5 || io_sel == 7); + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE2 connected to Slot 2 as %s (base address %x)", @@ -324,36 +318,31 @@ printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE2_MEM_BASE, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE2_IO_BASE, CONFIG_SYS_PCIE2_IO_PHYS, CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; #ifdef CONFIG_SYS_PCIE2_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, + pci_set_region(r++, CONFIG_SYS_PCIE2_MEM_BASE2, CONFIG_SYS_PCIE2_MEM_PHYS2, CONFIG_SYS_PCIE2_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -375,8 +364,8 @@ #ifdef CONFIG_PCI1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci1_hose; + struct pci_region *r = hose->regions; uint pci_agent = (host_agent == 6); uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */ @@ -397,35 +386,31 @@ ); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BASE, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI1_IO_BASE, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + #ifdef CONFIG_SYS_PCI1_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, + pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BASE2, CONFIG_SYS_PCI1_MEM_PHYS2, CONFIG_SYS_PCI1_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -660,45 +645,24 @@ } #if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) -{ - int node, tmp[2]; - const char *path; +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); +void ft_board_setup(void *blob, bd_t *bd) +{ ft_cpu_setup(blob, bd); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCIE2 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); +#endif +#ifdef CONFIG_PCIE2 + ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); #endif #ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci2", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci3", &pcie3_hose); #endif -#ifdef CONFIG_PCIE3 - path = fdt_getprop(blob, node, "pci3", NULL); - if (path) { - tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } -#endif - } } #endif
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 826180c..600d606 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -103,6 +103,9 @@ static struct pci_controller pcie3_hose; #endif +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + int first_free_busno=0; void @@ -126,10 +129,10 @@ #ifdef CONFIG_PCIE3 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie3_hose; int pcie_ep = (host_agent == 1); int pcie_configured = io_sel >= 1; + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE3 connected to ULI as %s (base address %x)", @@ -142,36 +145,31 @@ printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE3_MEM_BASE, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE3_IO_BASE, CONFIG_SYS_PCIE3_IO_PHYS, CONFIG_SYS_PCIE3_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; #ifdef CONFIG_SYS_PCIE3_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, + pci_set_region(r++, CONFIG_SYS_PCIE3_MEM_BASE2, CONFIG_SYS_PCIE3_MEM_PHYS2, CONFIG_SYS_PCIE3_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -198,10 +196,10 @@ #ifdef CONFIG_PCIE1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 5); int pcie_configured = io_sel & 6; + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE1 connected to Slot2 as %s (base address %x)", @@ -214,36 +212,31 @@ printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BASE, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; #ifdef CONFIG_SYS_PCIE1_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, + pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BASE2, CONFIG_SYS_PCIE1_MEM_PHYS2, CONFIG_SYS_PCIE1_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -266,10 +259,10 @@ #ifdef CONFIG_PCIE2 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie2_hose; int pcie_ep = (host_agent == 3); int pcie_configured = io_sel & 4; + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)", @@ -282,36 +275,31 @@ printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE2_MEM_BASE, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE2_IO_BASE, CONFIG_SYS_PCIE2_IO_PHYS, CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; #ifdef CONFIG_SYS_PCIE2_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, + pci_set_region(r++, CONFIG_SYS_PCIE2_MEM_BASE2, CONFIG_SYS_PCIE2_MEM_PHYS2, CONFIG_SYS_PCIE2_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -333,8 +321,8 @@ #ifdef CONFIG_PCI1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci1_hose; + struct pci_region *r = hose->regions; uint pci_agent = (host_agent == 6); uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */ @@ -355,35 +343,31 @@ ); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BASE, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI1_IO_BASE, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + #ifdef CONFIG_SYS_PCIE3_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, + pci_set_region(r++, CONFIG_SYS_PCIE3_MEM_BASE2, CONFIG_SYS_PCIE3_MEM_PHYS2, CONFIG_SYS_PCIE3_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -503,46 +487,25 @@ } #if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); -void -ft_board_setup(void *blob, bd_t *bd) +void ft_board_setup(void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; - ft_cpu_setup(blob, bd); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { + #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCIE2 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); #endif #ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci2", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci2", &pcie3_hose); #endif #ifdef CONFIG_PCIE3 - path = fdt_getprop(blob, node, "pci3", NULL); - if (path) { - tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci3", &pcie2_hose); #endif - } } #endif
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index 875628d..6eb62ea 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -285,6 +285,9 @@ static struct pci_controller pcie1_hose; #endif /* CONFIG_PCIE1 */ +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + int first_free_busno=0; void @@ -298,9 +301,9 @@ #ifdef CONFIG_PCI1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci1_hose; struct pci_config_table *table; + struct pci_region *r = hose->regions; uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */ uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ @@ -322,27 +325,22 @@ /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BASE, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI1_IO_BASE, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; /* relocate config table pointers */ hose->config_table = \ @@ -393,9 +391,9 @@ #ifdef CONFIG_PCIE1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3); + struct pci_region *r = hose->regions; int pcie_configured = io_sel >= 1; @@ -411,27 +409,23 @@ printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BASE, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -484,29 +478,16 @@ #if defined(CONFIG_OF_BOARD_SETUP) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - int node, tmp[2]; - const char *path; +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { +void ft_pci_setup(void *blob, bd_t *bd) +{ #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); #endif - } } #endif
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index eab1900..28e3892 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -323,6 +323,9 @@ static struct pci_controller pcie1_hose; #endif /* CONFIG_PCIE1 */ +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + int first_free_busno = 0; /* @@ -380,8 +383,8 @@ pib_init(); volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci1_hose; + struct pci_region *r = hose->regions; uint pci_32 = 1; /* PORDEVSR[15] */ uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ @@ -402,27 +405,23 @@ ); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BASE, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI1_IO_BASE, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno = first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -441,9 +440,9 @@ #ifdef CONFIG_PCIE1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3); + struct pci_region *r = hose->regions; int pcie_configured = io_sel >= 1; @@ -459,27 +458,23 @@ printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BASE, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -500,31 +495,18 @@ #endif /* CONFIG_PCI */ #if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) -{ - int node, tmp[2]; - const char *path; +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); +void ft_board_setup(void *blob, bd_t *bd) +{ ft_cpu_setup(blob, bd); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); #endif - } } #endif
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index b2402dc..d1528a7 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -147,6 +147,9 @@ static struct pci_controller pcie3_hose; #endif +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + int first_free_busno=0; #ifdef CONFIG_PCI void pci_init_board(void) @@ -172,11 +175,11 @@ #ifdef CONFIG_PCIE3 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie3_hose; int pcie_ep = (host_agent == 0) || (host_agent == 3) || (host_agent == 5) || (host_agent == 6); int pcie_configured = io_sel >= 1; + struct pci_region *r = hose->regions; u32 temp32; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ @@ -190,27 +193,23 @@ printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE3_MEM_BASE, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE3_IO_BASE, CONFIG_SYS_PCIE3_IO_PHYS, CONFIG_SYS_PCIE3_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -244,11 +243,11 @@ #ifdef CONFIG_PCIE2 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie2_hose; int pcie_ep = (host_agent == 2) || (host_agent == 4) || (host_agent == 6) || (host_agent == 0); int pcie_configured = io_sel & 4; + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)", @@ -261,27 +260,23 @@ printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE2_MEM_BASE, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE2_IO_BASE, CONFIG_SYS_PCIE2_IO_PHYS, CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -301,11 +296,11 @@ #ifdef CONFIG_PCIE1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent <= 1) || (host_agent == 4) || (host_agent == 5); int pcie_configured = io_sel & 6; + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE1 connected to Slot 2 as %s (base address %x)", @@ -318,27 +313,23 @@ printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BASE, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -568,10 +559,11 @@ #endif #if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); + void ft_board_setup(void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; ulong base, size; ft_cpu_setup(blob, bd); @@ -581,31 +573,15 @@ fdt_fixup_memory(blob, (u64)base, (u64)size); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { #ifdef CONFIG_PCIE3 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pcie3_hose); #endif #ifdef CONFIG_PCIE2 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); #endif #ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci2", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); #endif - } } #endif
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index 5faeca1..dacd2a9 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -240,6 +240,9 @@ int first_free_busno = 0; +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + void pci_init_board(void) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; @@ -256,11 +259,11 @@ #ifdef CONFIG_PCIE1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie1_hose; int pcie_configured = (io_sel == 1) || (io_sel == 4); int pcie_ep = (host_agent == 0) || (host_agent == 2) || (host_agent == 5); + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)) { printf(" PCIe 1 connected to Uli as %s (base address %x)\n", @@ -270,27 +273,23 @@ pci->pme_msg_det = 0xffffffff; /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BASE, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno = first_free_busno; pci_setup_indirect(hose, (int)&pci->cfg_addr, @@ -313,8 +312,8 @@ #ifdef CONFIG_PCIE2 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie2_hose; + struct pci_region *r = hose->regions; int pcie_configured = (io_sel == 0) || (io_sel == 4); int pcie_ep = (host_agent == 0) || (host_agent == 1) || @@ -329,27 +328,23 @@ pci->pme_msg_det = 0xffffffff; /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE2_MEM_BASE, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE2_IO_BASE, CONFIG_SYS_PCIE2_IO_PHYS, CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno = first_free_busno; pci_setup_indirect(hose, (int)&pci->cfg_addr, @@ -371,9 +366,9 @@ #ifdef CONFIG_PCI1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci1_hose; int pci_agent = (host_agent >= 4) && (host_agent <= 6); + struct pci_region *r = hose->regions; if ( !(devdisr & MPC86xx_DEVDISR_PCI1)) { printf(" PCI connected to PCI slots as %s" \ @@ -382,27 +377,23 @@ (uint)pci); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BASE, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI1_IO_BASE, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno = first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, @@ -422,12 +413,12 @@ } #if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); + void ft_board_setup(void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "timebase-frequency", bd->bi_busfreq / 4, 1); do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, @@ -442,36 +433,15 @@ fdt_fixup_memory(blob, bd->bi_memstart, bd->bi_memsize); - - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { - #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } - + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); #endif #ifdef CONFIG_PCIE2 - path = fdt_getprop(blob, node, "pci2", NULL); - if (path) { - tmp[1] = pcie2_hose.last_busno - - pcie2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci2", &pcie2_hose); #endif - } } #endif
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index fcaaacb..6b4d6ce 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -161,6 +161,8 @@ int first_free_busno = 0; +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); void pci_init_board(void) { @@ -173,8 +175,9 @@ #ifdef CONFIG_PCI1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci1_hose; + struct pci_region *r = hose->regions; + #ifdef DEBUG uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA) >> MPC8641_PORBMSR_HA_SHIFT; @@ -193,27 +196,23 @@ debug("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BASE, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI1_IO_BASE, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -242,32 +241,27 @@ #ifdef CONFIG_PCI2 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci2_hose; - + struct pci_region *r = hose->regions; /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI2_MEM_BASE, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI2_IO_BASE, CONFIG_SYS_PCI2_IO_PHYS, CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -286,33 +280,20 @@ #if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); void ft_board_setup(void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; - ft_cpu_setup(blob, bd); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCI2 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pci2_hose); #endif - } } #endif
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 21f82f2..e27c92d 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c
@@ -364,6 +364,9 @@ int first_free_busno=0; +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + void pci_init_board(void) { @@ -372,9 +375,9 @@ #ifdef CONFIG_PCI1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci1_hose; struct pci_config_table *table; + struct pci_region *r = hose->regions; uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */ uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ @@ -396,27 +399,22 @@ /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BASE, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI1_IO_BASE, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; /* relocate config table pointers */ hose->config_table = \ @@ -467,9 +465,9 @@ #ifdef CONFIG_PCIE1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3); + struct pci_region *r = hose->regions; int pcie_configured = io_sel >= 1; @@ -485,27 +483,27 @@ printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, + pci_set_region(r++, CONFIG_SYS_PCI_MEMORY_BUS, CONFIG_SYS_PCI_MEMORY_PHYS, CONFIG_SYS_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BASE, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -531,41 +529,17 @@ } #if defined(CONFIG_OF_BOARD_SETUP) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - int node, tmp[2]; +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { -#ifdef CONFIG_PCI1 - const char *path; - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } -#endif -#ifdef CONFIG_PCIE1 - const char *path; - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } -#endif - } -} -#endif - -#if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); +#ifdef CONFIG_PCI1 + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); +#endif +#ifdef CONFIG_PCIE1 + ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); #endif } #endif
diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index 06d1d2a..191045a 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c
@@ -220,6 +220,9 @@ int first_free_busno = 0; +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + void pci_init_board(void) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; @@ -231,8 +234,8 @@ #ifdef CONFIG_PCI1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci1_hose; + struct pci_region *r = hose->regions; #ifdef DEBUG uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA) >> MPC8641_PORBMSR_HA_SHIFT; @@ -251,27 +254,23 @@ debug("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BASE, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI1_IO_BASE, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -293,32 +292,28 @@ #ifdef CONFIG_PCI2 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci2_hose; + struct pci_region *r = hose->regions; /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI2_MEM_BASE, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI2_IO_BASE, CONFIG_SYS_PCI2_IO_PHYS, CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -337,33 +332,19 @@ #if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); -void -ft_board_setup (void *blob, bd_t *bd) +void ft_board_setup (void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; - ft_cpu_setup(blob, bd); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCI2 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pci2_hose); #endif - } } #endif
diff --git a/board/sc520_cdp/sc520_cdp_asm.S b/board/sc520_cdp/sc520_cdp_asm.S index 6ac5a5d..3a8a03f 100644 --- a/board/sc520_cdp/sc520_cdp_asm.S +++ b/board/sc520_cdp/sc520_cdp_asm.S
@@ -76,8 +76,8 @@ jmp *%ebp /* return to caller */ -.globl show_boot_progress -show_boot_progress: +.globl show_boot_progress_asm +show_boot_progress_asm: out %al, $0x80 xchg %al, %ah movw $0x680, %dx
diff --git a/board/sc520_spunk/sc520_spunk_asm.S b/board/sc520_spunk/sc520_spunk_asm.S index 3430b6a..eda7e91 100644 --- a/board/sc520_spunk/sc520_spunk_asm.S +++ b/board/sc520_spunk/sc520_spunk_asm.S
@@ -73,8 +73,8 @@ jmp *%ebp /* return to caller */ -.globl show_boot_progress -show_boot_progress: +.globl show_boot_progress_asm +show_boot_progress_asm: movl $0xfffefc32,%edx xorw $0xffff, %ax movw %ax,(%edx)
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 1f309bb..97d49ea 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -538,6 +538,9 @@ */ static int first_free_busno; +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + #if defined(CONFIG_PCI) || defined(CONFIG_PCI1) static struct pci_controller pci1_hose; #endif /* CONFIG_PCI || CONFIG_PCI1 */ @@ -552,8 +555,8 @@ #if defined(CONFIG_PCI) || defined(CONFIG_PCI1) uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CONFIG_SYS_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci1_hose; + struct pci_region *r = hose->regions; /* PORDEVSR[15] */ uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; @@ -578,28 +581,23 @@ /* inbound */ - pci_set_region (hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region (hose->regions + 1, + pci_set_region (r++, CONFIG_SYS_PCI1_MEM_BASE, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region (hose->regions + 2, + pci_set_region (r++, CONFIG_SYS_PCI1_IO_BASE, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno = first_free_busno; pci_setup_indirect (hose, (int)&pci->cfg_addr, @@ -641,10 +639,10 @@ uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CONFIG_SYS_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3); + struct pci_region *r = hose->regions; int pcie_configured = io_sel >= 1; @@ -660,27 +658,23 @@ puts ("\n"); /* inbound */ - pci_set_region (hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region (hose->regions + 1, + pci_set_region (r++, CONFIG_SYS_PCIE1_MEM_BASE, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region (hose->regions + 2, + pci_set_region (r++, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno = first_free_busno; pci_setup_indirect(hose, (int)&pci->cfg_addr, @@ -707,31 +701,19 @@ } #ifdef CONFIG_OF_BOARD_SETUP +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); + void ft_board_setup (void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; - ft_cpu_setup (blob, bd); - node = fdt_path_offset (blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { #if defined(CONFIG_PCI) || defined(CONFIG_PCI1) - path = fdt_getprop (blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path (blob, path, "bus-range", &tmp, 8, 1); - } -#endif /* CONFIG_PCI || CONFIG_PCI1 */ + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); +#endif #ifdef CONFIG_PCIE1 - path = fdt_getprop (blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path (blob, path, "bus-range", &tmp, 8, 1); - } -#endif /* CONFIG_PCIE1 */ - } + ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); +#endif } #endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/xilinx/ppc405-generic/.gitignore b/board/xilinx/ppc405-generic/.gitignore new file mode 100644 index 0000000..b644f59 --- /dev/null +++ b/board/xilinx/ppc405-generic/.gitignore
@@ -0,0 +1 @@ +config.tmp
diff --git a/board/xilinx/ppc405-generic/Makefile b/board/xilinx/ppc405-generic/Makefile new file mode 100644 index 0000000..b56bb49 --- /dev/null +++ b/board/xilinx/ppc405-generic/Makefile
@@ -0,0 +1,60 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es +# Work supported by Qtechnology http://www.qtec.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +endif + +INCS := +CFLAGS += $(INCS) +HOST_CFLAGS += $(INCS) + +LIB = $(obj)lib$(BOARD).a + +COBJS += ../../xilinx/ppc405-generic/xilinx_ppc405_generic.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
diff --git a/board/xilinx/ppc405-generic/config.mk b/board/xilinx/ppc405-generic/config.mk new file mode 100644 index 0000000..6d76755 --- /dev/null +++ b/board/xilinx/ppc405-generic/config.mk
@@ -0,0 +1,25 @@ +# +# (C) Copyright 2008 +# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es +# Work supported by Qtechnology http://www.qtec.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
diff --git a/board/xilinx/ppc405-generic/u-boot-ram.lds b/board/xilinx/ppc405-generic/u-boot-ram.lds new file mode 100644 index 0000000..0004d61 --- /dev/null +++ b/board/xilinx/ppc405-generic/u-boot-ram.lds
@@ -0,0 +1,134 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +ENTRY(_start) + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + + _end = . ; + PROVIDE (end = .); +}
diff --git a/board/xilinx/ppc405-generic/u-boot-rom.lds b/board/xilinx/ppc405-generic/u-boot-rom.lds new file mode 100644 index 0000000..d2bac9f --- /dev/null +++ b/board/xilinx/ppc405-generic/u-boot-rom.lds
@@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +ENTRY(_start) + +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + + _end = . ; + PROVIDE (end = .); +}
diff --git a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c new file mode 100644 index 0000000..9bd1770 --- /dev/null +++ b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c
@@ -0,0 +1,59 @@ +/* + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <config.h> +#include <common.h> +#include <asm/processor.h> + +ulong __get_PCI_freq(void) +{ + return 0; +} + +ulong get_PCI_freq(void) __attribute__((weak, alias("__get_PCI_freq"))); + +int __board_pre_init(void) +{ + return 0; +} +int board_pre_init(void) __attribute__((weak, alias("__board_pre_init"))); + +int __checkboard(void) +{ + puts("Xilinx PPC405 Generic Board\n"); + return 0; +} +int checkboard(void) __attribute__((weak, alias("__checkboard"))); + +phys_size_t __initdram(int board_type) +{ + return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR, + CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024); +} +phys_size_t initdram(int) __attribute__((weak, alias("__initdram"))); + +void __get_sys_info(sys_info_t *sysInfo) +{ + sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ; + sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ; + sysInfo->freqPCI = 0; + + return; +} +void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info")));
diff --git a/board/xilinx/ppc405-generic/xparameters.h b/board/xilinx/ppc405-generic/xparameters.h new file mode 100644 index 0000000..e8e8ced --- /dev/null +++ b/board/xilinx/ppc405-generic/xparameters.h
@@ -0,0 +1,36 @@ +/* + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * based on xparameters-ml507.h by Xilinx + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef XPARAMETER_H +#define XPARAMETER_H + +#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 +#define XPAR_IIC_EEPROM_BASEADDR 0x81600000 +#define XPAR_INTC_0_BASEADDR 0x81800000 +#define XPAR_SPI_0_BASEADDR 0x83400000 +#define XPAR_UARTLITE_0_BASEADDR 0x84000000 +#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000 +#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 +#define XPAR_CORE_CLOCK_FREQ_HZ 400000000 +#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 +#define XPAR_UARTLITE_0_BAUDRATE 9600 +#define XPAR_SPI_0_NUM_TRANSFER_BITS 8 + +#endif
diff --git a/common/fdt_support.c b/common/fdt_support.c index 8ceeb0f..d483d66 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c
@@ -35,6 +35,33 @@ */ DECLARE_GLOBAL_DATA_PTR; +/** + * fdt_getprop_u32_default - Find a node and return it's property or a default + * + * @fdt: ptr to device tree + * @path: path of node + * @prop: property name + * @dflt: default value if the property isn't found + * + * Convenience function to find a node and return it's property or a + * default value if it doesn't exist. + */ +u32 fdt_getprop_u32_default(void *fdt, const char *path, const char *prop, + const u32 dflt) +{ + const u32 *val; + int off; + + off = fdt_path_offset(fdt, path); + if (off < 0) + return dflt; + + val = fdt_getprop(fdt, off, prop, NULL); + if (val) + return *val; + else + return dflt; +} /** * fdt_find_and_setprop: Find a node and set it's property @@ -593,3 +620,72 @@ return actualsize; } + +#ifdef CONFIG_PCI +#define CONFIG_SYS_PCI_NR_INBOUND_WIN 3 + +#define FDT_PCI_PREFETCH (0x40000000) +#define FDT_PCI_MEM32 (0x02000000) +#define FDT_PCI_IO (0x01000000) +#define FDT_PCI_MEM64 (0x03000000) + +int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose) { + + int addrcell, sizecell, len, r; + u32 *dma_range; + /* sized based on pci addr cells, size-cells, & address-cells */ + u32 dma_ranges[(3 + 2 + 2) * CONFIG_SYS_PCI_NR_INBOUND_WIN]; + + addrcell = fdt_getprop_u32_default(blob, "/", "#address-cells", 1); + sizecell = fdt_getprop_u32_default(blob, "/", "#size-cells", 1); + + dma_range = &dma_ranges[0]; + for (r = 0; r < hose->region_count; r++) { + u64 bus_start, phys_start, size; + + /* skip if !PCI_REGION_MEMORY */ + if (!(hose->regions[r].flags & PCI_REGION_MEMORY)) + continue; + + bus_start = (u64)hose->regions[r].bus_start; + phys_start = (u64)hose->regions[r].phys_start; + size = (u64)hose->regions[r].size; + + dma_range[0] = 0; + if (size > 0x100000000ull) + dma_range[0] |= FDT_PCI_MEM64; + else + dma_range[0] |= FDT_PCI_MEM32; + if (hose->regions[r].flags & PCI_REGION_PREFETCH) + dma_range[0] |= FDT_PCI_PREFETCH; +#ifdef CONFIG_SYS_PCI_64BIT + dma_range[1] = bus_start >> 32; +#else + dma_range[1] = 0; +#endif + dma_range[2] = bus_start & 0xffffffff; + + if (addrcell == 2) { + dma_range[3] = phys_start >> 32; + dma_range[4] = phys_start & 0xffffffff; + } else { + dma_range[3] = phys_start & 0xffffffff; + } + + if (sizecell == 2) { + dma_range[3 + addrcell + 0] = size >> 32; + dma_range[3 + addrcell + 1] = size & 0xffffffff; + } else { + dma_range[3 + addrcell + 0] = size & 0xffffffff; + } + + dma_range += (3 + addrcell + sizecell); + } + + len = dma_range - &dma_ranges[0]; + if (len) + fdt_setprop(blob, phb_off, "dma-ranges", &dma_ranges[0], len*4); + + return 0; +} +#endif
diff --git a/cpu/i386/start.S b/cpu/i386/start.S index f5ad833..b6175b1 100644 --- a/cpu/i386/start.S +++ b/cpu/i386/start.S
@@ -55,7 +55,7 @@ /* so we try to indicate progress */ movw $0x01, %ax movl $.progress0, %ebp - jmp show_boot_progress + jmp show_boot_progress_asm .progress0: /* size memory */ @@ -74,7 +74,7 @@ /* indicate (lack of) progress */ movw $0x81, %ax movl $.progress0a, %ebp - jmp show_boot_progress + jmp show_boot_progress_asm .progress0a: jmp die mem_ok: @@ -82,7 +82,7 @@ /* indicate progress */ movw $0x02, %ax movl $.progress1, %ebp - jmp show_boot_progress + jmp show_boot_progress_asm .progress1: /* create a stack after the bss */ @@ -104,7 +104,7 @@ /* indicate (lack of) progress */ movw $0x82, %ax movl $.progress1a, %ebp - jmp show_boot_progress + jmp show_boot_progress_asm .progress1a: jmp die @@ -113,7 +113,7 @@ /* indicate progress */ movw $0x03, %ax movl $.progress2, %ebp - jmp show_boot_progress + jmp show_boot_progress_asm .progress2: /* copy data section to ram, size must be 4-byte aligned */ @@ -136,7 +136,7 @@ /* indicate (lack of) progress */ movw $0x83, %ax movl $.progress2a, %ebp - jmp show_boot_progress + jmp show_boot_progress_asm .progress2a: jmp die @@ -145,7 +145,7 @@ /* indicate progress */ movw $0x04, %ax movl $.progress3, %ebp - jmp show_boot_progress + jmp show_boot_progress_asm .progress3: /* clear bss section in ram, size must be 4-byte aligned */ @@ -168,7 +168,7 @@ /* indicate (lack of) progress */ movw $0x84, %ax movl $.progress3a, %ebp - jmp show_boot_progress + jmp show_boot_progress_asm .progress3a: jmp die @@ -180,7 +180,7 @@ /* indicate progress */ movw $0x05, %ax movl $.progress4, %ebp - jmp show_boot_progress + jmp show_boot_progress_asm .progress4: call start_i386boot /* Enter, U-boot! */ @@ -188,7 +188,7 @@ /* indicate (lack of) progress */ movw $0x85, %ax movl $.progress4a, %ebp - jmp show_boot_progress + jmp show_boot_progress_asm .progress4a: die: hlt
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index b8f9125..c780687 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c
@@ -134,6 +134,10 @@ puts("Unknown"); break; } + + if (PVR_MEM(pvr) == 0x03) + puts("MC"); + printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr); get_sys_info(&sysinfo);
diff --git a/cpu/mpc85xx/ddr-gen3.c b/cpu/mpc85xx/ddr-gen3.c index e0654bb..a2b45c5 100644 --- a/cpu/mpc85xx/ddr-gen3.c +++ b/cpu/mpc85xx/ddr-gen3.c
@@ -79,15 +79,18 @@ out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); /* - * 32-bit workaround for DDR2 - * 32_BE + * For 8572 DDR1 erratum - DDR controller may enter illegal state + * when operatiing in 32-bit bus mode with 4-beat bursts, + * This erratum does not affect DDR3 mode, only for DDR2 mode. */ +#ifdef CONFIG_MPC8572 if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2) - && in_be32(&ddr->sdram_cfg_2) & 0x80000) { + && in_be32(&ddr->sdram_cfg) & 0x80000) { /* set DEBUG_1[31] */ u32 temp = in_be32(&ddr->debug_1); out_be32(&ddr->debug_1, temp | 1); } +#endif /* * 200 painful micro-seconds must elapse between
diff --git a/cpu/mpc85xx/release.S b/cpu/mpc85xx/release.S index ec5e4da..7c3e8a1 100644 --- a/cpu/mpc85xx/release.S +++ b/cpu/mpc85xx/release.S
@@ -24,14 +24,18 @@ __secondary_start_page: /* First do some preliminary setup */ lis r3, HID0_EMCP@h /* enable machine check */ +#ifndef CONFIG_E500MC ori r3,r3,HID0_TBEN@l /* enable Timebase */ +#endif #ifdef CONFIG_PHYS_64BIT ori r3,r3,HID0_ENMAS7@l /* enable MAS7 updates */ #endif mtspr SPRN_HID0,r3 +#ifndef CONFIG_E500MC li r3,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */ mtspr SPRN_HID1,r3 +#endif /* Enable branch prediction */ li r3,0x201 @@ -64,7 +68,11 @@ /* r10 has the base address for the entry */ mfspr r0,SPRN_PIR +#ifdef CONFIG_E500MC + rlwinm r4,r0,27,27,31 +#else mr r4,r0 +#endif slwi r8,r4,5 add r10,r3,r8
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index fc3c336..651ff1c 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S
@@ -163,8 +163,10 @@ ori r0,r0,HID0_TBEN@l /* Enable Timebase */ mtspr HID0,r0 +#ifndef CONFIG_E500MC li r0,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */ mtspr HID1,r0 +#endif /* Enable Branch Prediction */ #if defined(CONFIG_BTB) @@ -998,8 +1000,8 @@ .globl unlock_ram_in_cache unlock_ram_in_cache: /* invalidate the INIT_RAM section */ - lis r3,(CONFIG_SYS_INIT_RAM_ADDR & ~31)@h - ori r3,r3,(CONFIG_SYS_INIT_RAM_ADDR & ~31)@l + lis r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@h + ori r3,r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@l mfspr r4,L1CFG0 andi. r4,r4,0x1ff slwi r4,r4,(10 - 1 - L1_CACHE_SHIFT)
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 31902a0..882ef21 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S
@@ -918,7 +918,8 @@ ori r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE@l mtdccr r4 -#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR)) +#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))\ + && !defined (CONFIG_XILINX_405) /*----------------------------------------------------------------------- */ /* Tune the speed and size for flash CS0 */ /*----------------------------------------------------------------------- */
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 38a16e5..7625ccc 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c
@@ -18,6 +18,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's * @@ -39,10 +41,92 @@ pci_dev_t dev, int sub_bus); void pciauto_postscan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus); - void pciauto_config_init(struct pci_controller *hose); -void -fsl_pci_init(struct pci_controller *hose) + +#ifndef CONFIG_SYS_PCI_MEMORY_BUS +#define CONFIG_SYS_PCI_MEMORY_BUS 0 +#endif + +#ifndef CONFIG_SYS_PCI_MEMORY_PHYS +#define CONFIG_SYS_PCI_MEMORY_PHYS 0 +#endif + +#if defined(CONFIG_SYS_PCI_64BIT) && !defined(CONFIG_SYS_PCI64_MEMORY_BUS) +#define CONFIG_SYS_PCI64_MEMORY_BUS (64ull*1024*1024*1024) +#endif + +int fsl_pci_setup_inbound_windows(struct pci_region *r) +{ + struct pci_region *rgn_base = r; + u64 sz = min((u64)gd->ram_size, 1ull << 32); + + phys_addr_t phys_start = CONFIG_SYS_PCI_MEMORY_PHYS; + pci_addr_t bus_start = CONFIG_SYS_PCI_MEMORY_BUS; + pci_size_t pci_sz = 1ull << __ilog2_u64(sz); + + debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n", + (u64)bus_start, (u64)phys_start, (u64)pci_sz); + pci_set_region(r++, bus_start, phys_start, pci_sz, + PCI_REGION_MEM | PCI_REGION_MEMORY | + PCI_REGION_PREFETCH); + + sz -= pci_sz; + bus_start += pci_sz; + phys_start += pci_sz; + + pci_sz = 1ull << __ilog2_u64(sz); + if (sz) { + debug ("R1 bus_start: %llx phys_start: %llx size: %llx\n", + (u64)bus_start, (u64)phys_start, (u64)pci_sz); + pci_set_region(r++, bus_start, phys_start, pci_sz, + PCI_REGION_MEM | PCI_REGION_MEMORY | + PCI_REGION_PREFETCH); + sz -= pci_sz; + bus_start += pci_sz; + phys_start += pci_sz; + } + +#if defined(CONFIG_PHYS_64BIT) && defined(CONFIG_SYS_PCI_64BIT) + /* + * On 64-bit capable systems, set up a mapping for all of DRAM + * in high pci address space. + */ + pci_sz = 1ull << __ilog2_u64(gd->ram_size); + /* round up to the next largest power of two */ + if (gd->ram_size > pci_sz) + pci_sz = 1ull << (__ilog2_u64(gd->ram_size) + 1); + debug ("R64 bus_start: %llx phys_start: %llx size: %llx\n", + (u64)CONFIG_SYS_PCI64_MEMORY_BUS, + (u64)CONFIG_SYS_PCI_MEMORY_PHYS, + (u64)pci_sz); + pci_set_region(r++, + CONFIG_SYS_PCI64_MEMORY_BUS, + CONFIG_SYS_PCI_MEMORY_PHYS, + pci_sz, + PCI_REGION_MEM | PCI_REGION_MEMORY | + PCI_REGION_PREFETCH); +#else + pci_sz = 1ull << __ilog2_u64(sz); + if (sz) { + debug ("R2 bus_start: %llx phys_start: %llx size: %llx\n", + (u64)bus_start, (u64)phys_start, (u64)pci_sz); + pci_set_region(r++, bus_start, phys_start, pci_sz, + PCI_REGION_MEM | PCI_REGION_MEMORY | + PCI_REGION_PREFETCH); + sz -= pci_sz; + bus_start += pci_sz; + phys_start += pci_sz; + } +#endif + + if (sz && (((u64)gd->ram_size) < (1ull << 32))) + printf("Was not able to map all of memory via " + "inbound windows -- %lld remaining\n", sz); + + return r - rgn_base; +} + +void fsl_pci_init(struct pci_controller *hose) { u16 temp16; u32 temp32; @@ -65,25 +149,36 @@ #endif for (r=0; r<hose->region_count; r++) { + u32 sz = (__ilog2_u64((u64)hose->regions[r].size) - 1); if (hose->regions[r].flags & PCI_REGION_MEMORY) { /* inbound */ - pi->pitar = (hose->regions[r].bus_start >> 12) & 0x000fffff; - pi->piwbar = (hose->regions[r].phys_start >> 12) & 0x000fffff; + u32 flag = PIWAR_EN | PIWAR_LOCAL | + PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; + pi->pitar = (hose->regions[r].phys_start >> 12); + pi->piwbar = (hose->regions[r].bus_start >> 12); +#ifdef CONFIG_SYS_PCI_64BIT + pi->piwbear = (hose->regions[r].bus_start >> 44); +#else pi->piwbear = 0; - pi->piwar = PIWAR_EN | PIWAR_PF | PIWAR_LOCAL | - PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | - (__ilog2(hose->regions[r].size) - 1); +#endif + if (hose->regions[r].flags & PCI_REGION_PREFETCH) + flag |= PIWAR_PF; + pi->piwar = flag | sz; pi++; inbound = hose->regions[r].size > 0; } else { /* Outbound */ - po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff; - po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff; + po->powbar = (hose->regions[r].phys_start >> 12); + po->potar = (hose->regions[r].bus_start >> 12); +#ifdef CONFIG_SYS_PCI_64BIT + po->potear = (hose->regions[r].bus_start >> 44); +#else po->potear = 0; +#endif if (hose->regions[r].flags & PCI_REGION_IO) - po->powar = POWAR_EN | POWAR_IO_READ | POWAR_IO_WRITE | - (__ilog2(hose->regions[r].size) - 1); + po->powar = POWAR_EN | sz | + POWAR_IO_READ | POWAR_IO_WRITE; else - po->powar = POWAR_EN | POWAR_MEM_READ | POWAR_MEM_WRITE | - (__ilog2(hose->regions[r].size) - 1); + po->powar = POWAR_EN | sz | + POWAR_MEM_READ | POWAR_MEM_WRITE; po++; } } @@ -208,3 +303,23 @@ pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff); } } + +#ifdef CONFIG_OF_BOARD_SETUP +#include <libfdt.h> +#include <fdt_support.h> + +void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose) +{ + int off = fdt_path_offset(blob, pci_alias); + + if (off >= 0) { + u32 bus_range[2]; + + bus_range[0] = 0; + bus_range[1] = hose->last_busno - hose->first_busno; + fdt_setprop(blob, off, "bus-range", &bus_range[0], 2*4); + fdt_pci_dma_ranges(blob, off, hose); + } +} +#endif
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 41780db..e2b05d8 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c
@@ -218,12 +218,12 @@ * */ -unsigned long pci_hose_phys_to_bus (struct pci_controller *hose, +pci_addr_t pci_hose_phys_to_bus (struct pci_controller *hose, phys_addr_t phys_addr, unsigned long flags) { struct pci_region *res; - unsigned long bus_addr; + pci_addr_t bus_addr; int i; if (!hose) { @@ -252,7 +252,7 @@ } phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose, - unsigned long bus_addr, + pci_addr_t bus_addr, unsigned long flags) { struct pci_region *res; @@ -288,15 +288,17 @@ int pci_hose_config_device(struct pci_controller *hose, pci_dev_t dev, unsigned long io, - unsigned long mem, + pci_addr_t mem, unsigned long command) { - unsigned int bar_response, bar_size, bar_value, old_command; + unsigned int bar_response, old_command; + pci_addr_t bar_value; + pci_size_t bar_size; unsigned char pin; int bar, found_mem64; - debug ("PCI Config: I/O=0x%lx, Memory=0x%lx, Command=0x%lx\n", - io, mem, command); + debug ("PCI Config: I/O=0x%lx, Memory=0x%llx, Command=0x%lx\n", + io, (u64)mem, command); pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0); @@ -319,10 +321,19 @@ io = io + bar_size; } else { if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == - PCI_BASE_ADDRESS_MEM_TYPE_64) - found_mem64 = 1; + PCI_BASE_ADDRESS_MEM_TYPE_64) { + u32 bar_response_upper; + u64 bar64; + pci_hose_write_config_dword(hose, dev, bar+4, 0xffffffff); + pci_hose_read_config_dword(hose, dev, bar+4, &bar_response_upper); - bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1; + bar64 = ((u64)bar_response_upper << 32) | bar_response; + + bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1; + found_mem64 = 1; + } else { + bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1); + } /* round up region base address to multiple of size */ mem = ((mem - 1) | (bar_size - 1)) + 1; @@ -332,11 +343,15 @@ } /* Write it out and update our limit */ - pci_hose_write_config_dword (hose, dev, bar, bar_value); + pci_hose_write_config_dword (hose, dev, bar, (u32)bar_value); if (found_mem64) { bar += 4; +#ifdef CONFIG_SYS_PCI_64BIT + pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32)); +#else pci_hose_write_config_dword (hose, dev, bar, 0x00000000); +#endif } }
diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index 3844359..c20b981 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c
@@ -45,14 +45,14 @@ res->bus_lower = res->bus_start ? res->bus_start : 0x1000; } -void pciauto_region_align(struct pci_region *res, unsigned long size) +void pciauto_region_align(struct pci_region *res, pci_size_t size) { res->bus_lower = ((res->bus_lower - 1) | (size - 1)) + 1; } -int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar) +int pciauto_region_allocate(struct pci_region* res, pci_size_t size, pci_addr_t *bar) { - unsigned long addr; + pci_addr_t addr; if (!res) { DEBUGF("No resource"); @@ -68,13 +68,13 @@ res->bus_lower = addr + size; - DEBUGF("address=0x%lx bus_lower=%x", addr, res->bus_lower); + DEBUGF("address=0x%llx bus_lower=0x%llx", (u64)addr, (u64)res->bus_lower); *bar = addr; return 0; error: - *bar = 0xffffffff; + *bar = (pci_addr_t)-1; return -1; } @@ -88,7 +88,9 @@ struct pci_region *prefetch, struct pci_region *io) { - unsigned int bar_value, bar_response, bar_size; + unsigned int bar_response; + pci_addr_t bar_value; + pci_size_t bar_size; unsigned int cmdstat = 0; struct pci_region *bar_res; int bar, bar_nr = 0; @@ -114,33 +116,46 @@ & 0xffff) + 1; bar_res = io; - DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%x, ", bar_nr, bar_size); + DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ", bar_nr, (u64)bar_size); } else { if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == - PCI_BASE_ADDRESS_MEM_TYPE_64) - found_mem64 = 1; + PCI_BASE_ADDRESS_MEM_TYPE_64) { + u32 bar_response_upper; + u64 bar64; + pci_hose_write_config_dword(hose, dev, bar+4, 0xffffffff); + pci_hose_read_config_dword(hose, dev, bar+4, &bar_response_upper); - bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1; + bar64 = ((u64)bar_response_upper << 32) | bar_response; + + bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1; + found_mem64 = 1; + } else { + bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1); + } if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH)) bar_res = prefetch; else bar_res = mem; - DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%x, ", bar_nr, bar_size); + DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%llx, ", bar_nr, (u64)bar_size); } if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) { /* Write it out and update our limit */ - pci_hose_write_config_dword(hose, dev, bar, bar_value); + pci_hose_write_config_dword(hose, dev, bar, (u32)bar_value); - /* - * If we are a 64-bit decoder then increment to the - * upper 32 bits of the bar and force it to locate - * in the lower 4GB of memory. - */ if (found_mem64) { bar += 4; +#ifdef CONFIG_SYS_PCI_64BIT + pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32)); +#else + /* + * If we are a 64-bit decoder then increment to the + * upper 32 bits of the bar and force it to locate + * in the lower 4GB of memory. + */ pci_hose_write_config_dword(hose, dev, bar, 0x00000000); +#endif } cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ? @@ -289,35 +304,36 @@ if (hose->pci_mem) { pciauto_region_init(hose->pci_mem); - DEBUGF("PCI Autoconfig: Bus Memory region: [%lx-%lx],\n" - "\t\tPhysical Memory [%x-%x]\n", - hose->pci_mem->bus_start, - hose->pci_mem->bus_start + hose->pci_mem->size - 1, - hose->pci_mem->phys_start, - hose->pci_mem->phys_start + hose->pci_mem->size - 1); + DEBUGF("PCI Autoconfig: Bus Memory region: [0x%llx-0x%llx],\n" + "\t\tPhysical Memory [%llx-%llxx]\n", + (u64)hose->pci_mem->bus_start, + (u64)(hose->pci_mem->bus_start + hose->pci_mem->size - 1), + (u64)hose->pci_mem->phys_start, + (u64)(hose->pci_mem->phys_start + hose->pci_mem->size - 1)); } if (hose->pci_prefetch) { pciauto_region_init(hose->pci_prefetch); - DEBUGF("PCI Autoconfig: Bus Prefetchable Mem: [%lx-%lx],\n" - "\t\tPhysical Memory [%x-%x]\n", - hose->pci_prefetch->bus_start, - hose->pci_prefetch->bus_start + hose->pci_prefetch->size - 1, - hose->pci_prefetch->phys_start, - hose->pci_prefetch->phys_start + - hose->pci_prefetch->size - 1); + DEBUGF("PCI Autoconfig: Bus Prefetchable Mem: [0x%llx-0x%llx],\n" + "\t\tPhysical Memory [%llx-%llx]\n", + (u64)hose->pci_prefetch->bus_start, + (u64)(hose->pci_prefetch->bus_start + + hose->pci_prefetch->size - 1), + (u64)hose->pci_prefetch->phys_start, + (u64)(hose->pci_prefetch->phys_start + + hose->pci_prefetch->size - 1)); } if (hose->pci_io) { pciauto_region_init(hose->pci_io); - DEBUGF("PCI Autoconfig: Bus I/O region: [%lx-%lx],\n" - "\t\tPhysical Memory: [%x-%x]\n", - hose->pci_io->bus_start, - hose->pci_io->bus_start + hose->pci_io->size - 1, - hose->pci_io->phys_start, - hose->pci_io->phys_start + hose->pci_io->size - 1); + DEBUGF("PCI Autoconfig: Bus I/O region: [0x%llx-0x%llx],\n" + "\t\tPhysical Memory: [%llx-%llx]\n", + (u64)hose->pci_io->bus_start, + (u64)(hose->pci_io->bus_start + hose->pci_io->size - 1), + (u64)hose->pci_io->phys_start, + (u64)(hose->pci_io->phys_start + hose->pci_io->size - 1)); } }
diff --git a/include/asm-ppc/cache.h b/include/asm-ppc/cache.h index 7252be7..53e8d05 100644 --- a/include/asm-ppc/cache.h +++ b/include/asm-ppc/cache.h
@@ -12,6 +12,8 @@ #define L1_CACHE_SHIFT 4 #elif defined(CONFIG_PPC64BRIDGE) #define L1_CACHE_SHIFT 7 +#elif defined(CONFIG_E500MC) +#define L1_CACHE_SHIFT 6 #else #define L1_CACHE_SHIFT 5 #endif
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index ad30099..4892d8b 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h
@@ -1568,7 +1568,7 @@ #define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000 #define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000 #define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000 -#define MPC85xx_PORDEVSR_IO_SEL 0x00380000 +#define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000 #define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000 #define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000
diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h index 2450adb..1b74526 100644 --- a/include/configs/ATUM8548.h +++ b/include/configs/ATUM8548.h
@@ -287,11 +287,6 @@ #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -/* PCI view of System Memory */ -#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 - #endif /* CONFIG_PCI */ #if defined(CONFIG_TSEC_ENET)
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 38be10d..c4389cc 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h
@@ -41,6 +41,7 @@ #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ @@ -134,14 +135,6 @@ #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 #define CONFIG_SYS_DDR_SBE 0x00010000 -/* FIXME: Not used in fixed_sdram function */ -#define CONFIG_SYS_DDR_MODE 0x00000022 -#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS2_BNDS 0x00000FFF /* Not done */ -#define CONFIG_SYS_DDR_CS3_BNDS 0x00000FFF /* Not done */ -#define CONFIG_SYS_DDR_CS4_BNDS 0x00000FFF /* Not done */ -#define CONFIG_SYS_DDR_CS5_BNDS 0x00000FFF /* Not done */ - /* Make sure required options are set */ #ifndef CONFIG_SPD_EEPROM #error ("CONFIG_SPD_EEPROM is required") @@ -314,11 +307,6 @@ * Memory space is mapped 1-1, but I/O space must start from 0. */ -/* PCI view of System Memory */ -#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 - #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 5a14969..79a52d9 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h
@@ -46,6 +46,7 @@ #endif #define CONFIG_PCI +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE #define CONFIG_FSL_LAW 1 /* Use common FSL init code */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index eede26a..7ada8a2 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h
@@ -38,6 +38,7 @@ #define CONFIG_MPC8541CDS 1 /* MPC8541CDS board specific */ #define CONFIG_PCI +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 0987448..cdbbea6 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h
@@ -41,6 +41,7 @@ #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ @@ -275,11 +276,6 @@ #define CONFIG_SYS_PCI1_IO_PHYS 0xe1000000 #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */ -/* PCI view of System Memory */ -#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 - /* controller 2, Slot 1, tgtid 1, Base address 9000 */ #define CONFIG_SYS_PCIE2_MEM_BASE 0x80000000 #define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 892c52e..083afba 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h
@@ -43,6 +43,7 @@ #undef CONFIG_PCI2 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -419,11 +420,6 @@ #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -/* PCI view of System Memory */ -#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 - #endif /* CONFIG_PCI */
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 41870f1..f9419cc 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h
@@ -38,6 +38,7 @@ #define CONFIG_MPC8555CDS 1 /* MPC8555CDS board specific */ #define CONFIG_PCI +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE #define CONFIG_FSL_LAW 1 /* Use common FSL init code */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 0d3a500..f67d489 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h
@@ -43,6 +43,7 @@ #define CONFIG_MPC8560 1 #define CONFIG_PCI +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index ba2f152..ab3e6d6 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h
@@ -38,6 +38,7 @@ #define CONFIG_PCIE1 1 /* PCIE controller */ #define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_QE /* Enable QE */ #define CONFIG_ENV_OVERWRITE @@ -388,11 +389,6 @@ #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ -/* PCI view of System Memory */ -#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 - #endif /* CONFIG_PCI */ #ifndef CONFIG_NET_MULTI
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 5688589..eefb06c 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h
@@ -42,6 +42,7 @@ #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ @@ -135,16 +136,6 @@ #define CONFIG_SYS_DDR_SBE 0x00010000 /* - * FIXME: Not used in fixed_sdram function - */ -#define CONFIG_SYS_DDR_MODE 0x00000022 -#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS2_BNDS 0x00000FFF /* Not done */ -#define CONFIG_SYS_DDR_CS3_BNDS 0x00000FFF /* Not done */ -#define CONFIG_SYS_DDR_CS4_BNDS 0x00000FFF /* Not done */ -#define CONFIG_SYS_DDR_CS5_BNDS 0x00000FFF /* Not done */ - -/* * Make sure required options are set */ #ifndef CONFIG_SPD_EEPROM @@ -335,11 +326,6 @@ * Memory space is mapped 1-1, but I/O space must start from 0. */ -/* PCI view of System Memory */ -#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 - /* controller 3, direct to uli, tgtid 3, Base address 8000 */ #define CONFIG_SYS_PCIE3_MEM_BASE 0x80000000 #define CONFIG_SYS_PCIE3_MEM_PHYS CONFIG_SYS_PCIE3_MEM_BASE
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 678e1e1..fe80e5d 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h
@@ -41,6 +41,7 @@ #define CONFIG_PCIE1 1 /* PCIe 1 connected to ULI bridge */ #define CONFIG_PCIE2 1 /* PCIe 2 connected to slot */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ #define CONFIG_ENV_OVERWRITE @@ -278,11 +279,6 @@ #define CONFIG_SYS_PCI1_IO_PHYS 0xe1000000 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ -/* PCI view of System Memory */ -#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 - /* For RTL8139 */ #define KSEG1ADDR(x) ({u32 _x = le32_to_cpu(*(u32 *)(x)); (&_x); }) #define _IO_BASE 0x00000000
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index e5710c0..80c8bee 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h
@@ -49,6 +49,7 @@ #define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */ #define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_FSL_LAW 1 /* Use common FSL law init code */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ @@ -304,11 +305,6 @@ #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ -/* PCI view of System Memory */ -#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 - /* For RTL8139 */ #define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);}) #define _IO_BASE 0x00000000
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index b05f43d..2d4048a 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h
@@ -403,11 +403,6 @@ #define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE #define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */ -/* PCI view of System Memory */ -#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 - #ifdef CONFIG_PCIE1 /* * General PCI express
diff --git a/include/configs/fx12mm.h b/include/configs/fx12mm.h new file mode 100644 index 0000000..d45e7a0 --- /dev/null +++ b/include/configs/fx12mm.h
@@ -0,0 +1,72 @@ +/* + * (C) Copyright 2008 + * + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * This work has been supported by: QTechnology http://qtec.com + * + * Georg Schardt <schardt@team-ctech.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +/* + Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec, + see http://www.em.avnet.com +*/ + +#ifndef __CONFIG_FX12_H +#define __CONFIG_FX12_H + +#include "../board/avnet/fx12mm/xparameters.h" + +/* cmd config */ +#define CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_NET + +/* sdram */ +#define CONFIG_SYS_SDRAM_SIZE_MB 64 + +/* environment */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_SYS_ENV_OFFSET 0xA0000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET) +#define CONFIG_ENV_OVERWRITE 1 + +/*Misc*/ +#define CONFIG_SYS_PROMPT "FX12MM:/# " /* Monitor Command Prompt */ +#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" + +/*Flash*/ +#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_2MX16_MEM0_BASEADDR +#define CONFIG_SYS_FLASH_SIZE (4*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 71 +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define MTDIDS_DEFAULT "nor0=fx12mm-flash" +#define MTDPARTS_DEFAULT "mtdparts=fx12mm-flash:-(user)" + + +#include "configs/xilinx-ppc405.h" + +#endif /* __CONFIG_H */ +
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 237a9c5..b943f31 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h
@@ -235,9 +235,16 @@ * * DDR Autocalibration Method_B is the default. */ +#if 0 +/* + * Needs FIX!!! + * Disable autocalibration for now, because of the unresolved problem + * with kilauea board using 200MHz PLB/DDR2 frequency + */ #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */ #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */ #undef CONFIG_PPC4xx_DDR_METHOD_A +#endif #define CONFIG_SYS_SDRAM0_MB0CF_BASE (( 0 << 20) + CONFIG_SYS_SDRAM_BASE)
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 54f3e66..aefd30a 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h
@@ -387,11 +387,6 @@ #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -/* PCI view of System Memory */ -#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 - #endif /* CONFIG_PCI */
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 14d1c88..09a9901 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h
@@ -308,11 +308,6 @@ #define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE #define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */ -/* PCI view of System Memory */ -#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 -#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 - #define CONFIG_SYS_PCI2_MEM_BASE 0xa0000000 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */
diff --git a/include/configs/xilinx-ppc405-generic.h b/include/configs/xilinx-ppc405-generic.h new file mode 100644 index 0000000..5036c62 --- /dev/null +++ b/include/configs/xilinx-ppc405-generic.h
@@ -0,0 +1,58 @@ +/* + * + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * + * (C) Copyright 2008 + * Georg Schardt <schardt@team-ctech.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_GEN_H +#define __CONFIG_GEN_H + +#include "../board/xilinx/ppc405-generic/xparameters.h" + +/* sdram */ +#define CONFIG_SYS_SDRAM_SIZE_MB 256 + +/* environment */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_SYS_ENV_OFFSET 0x3F0000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET) +#define CONFIG_ENV_OVERWRITE 1 + +/*Misc*/ +#define CONFIG_SYS_PROMPT "xlx-ppc405:/# " /* Monitor Command Prompt */ +#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" + +/*Flash*/ +#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR +#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 71 +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define MTDIDS_DEFAULT "nor0=ppc405-flash" +#define MTDPARTS_DEFAULT "mtdpartsa=ppc405-flash:-(user)" + +#include <configs/xilinx-ppc405.h> +#endif /* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc405.h b/include/configs/xilinx-ppc405.h new file mode 100644 index 0000000..7458470 --- /dev/null +++ b/include/configs/xilinx-ppc405.h
@@ -0,0 +1,126 @@ +/* + * + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * + * (C) Copyright 2008 + * Georg Schardt <schardt@team-ctech.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* cpu parameter */ +#define CONFIG_4xx 1 +#define CONFIG_405 1 +#define CONFIG_XILINX_405 1 + +/* memory map */ +#define CONFIG_SYS_SDRAM_BASE 0x0 +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (192 * 1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) + +/* u-boot commands configuration */ +#include <config_cmd_default.h> + +/*Misc*/ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* default load address */ +#define CONFIG_SYS_EXTBDINFO 1 /* Extended board_into (bd_t) */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_LOOPW /* enable loopw command */ +#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE /* include version env variable */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) + /* Initial Memory map for Linux */ +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_CACHELINE_SHIFT 2 + +/* stack */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */ +#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_FLASH_CF 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_EMPTY_INFO 1 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_PROTECTION + +/* serial communication */ +#ifdef XPAR_UARTLITE_0_BASEADDR +#define CONFIG_XILINX_UARTLITE +#define CONFIG_SERIAL_BASE XPAR_UARTLITE_0_BASEADDR +#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE +#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } +#else +#ifdef XPAR_UARTNS550_0_BASEADDR +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 4 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 XPAR_UARTNS550_0_BASEADDR +#define CONFIG_SYS_NS16550_CLK XPAR_UARTNS550_0_CLOCK_FREQ_HZ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 } +#endif +#endif + +/* cmd config */ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_PING +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_IMLS + +#endif
diff --git a/include/fdt_support.h b/include/fdt_support.h index ceaadc2..6062df9 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h
@@ -28,6 +28,8 @@ #include <fdt.h> +u32 fdt_getprop_u32_default(void *fdt, const char *path, const char *prop, + const u32 dflt); int fdt_chosen(void *fdt, int force); int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force); void do_fixup_by_path(void *fdt, const char *path, const char *prop, @@ -63,6 +65,11 @@ static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} #endif +#ifdef CONFIG_PCI +#include <pci.h> +int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose); +#endif + #ifdef CONFIG_OF_BOARD_SETUP void ft_board_setup(void *blob, bd_t *bd); void ft_cpu_setup(void *blob, bd_t *bd);
diff --git a/include/pci.h b/include/pci.h index 1c8e216..eebe8a8 100644 --- a/include/pci.h +++ b/include/pci.h
@@ -101,8 +101,8 @@ #define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */ #define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */ #define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */ -#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) -#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL) +#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fULL) +#define PCI_BASE_ADDRESS_IO_MASK (~0x03ULL) /* bit 1 is reserved if address_space = 1 */ /* Header type 0 (normal devices) */ @@ -111,7 +111,7 @@ #define PCI_SUBSYSTEM_ID 0x2e #define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */ #define PCI_ROM_ADDRESS_ENABLE 0x01 -#define PCI_ROM_ADDRESS_MASK (~0x7ffUL) +#define PCI_ROM_ADDRESS_MASK (~0x7ffULL) #define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */ @@ -312,13 +312,21 @@ #include <pci_ids.h> -struct pci_region { - unsigned long bus_start; /* Start on the bus */ - phys_addr_t phys_start; /* Start in physical address space */ - unsigned long size; /* Size */ - unsigned long flags; /* Resource flags */ +#ifdef CONFIG_SYS_PCI_64BIT +typedef u64 pci_addr_t; +typedef u64 pci_size_t; +#else +typedef u32 pci_addr_t; +typedef u32 pci_size_t; +#endif - unsigned long bus_lower; +struct pci_region { + pci_addr_t bus_start; /* Start on the bus */ + phys_addr_t phys_start; /* Start in physical address space */ + pci_size_t size; /* Size */ + unsigned long flags; /* Resource flags */ + + pci_addr_t bus_lower; }; #define PCI_REGION_MEM 0x00000000 /* PCI memory space */ @@ -330,9 +338,9 @@ #define PCI_REGION_RO 0x00000200 /* Read-only memory */ extern __inline__ void pci_set_region(struct pci_region *reg, - unsigned long bus_start, + pci_addr_t bus_start, phys_addr_t phys_start, - unsigned long size, + pci_size_t size, unsigned long flags) { reg->bus_start = bus_start; reg->phys_start = phys_start; @@ -433,9 +441,9 @@ extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data); extern phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose, - unsigned long addr, unsigned long flags); -extern unsigned long pci_hose_phys_to_bus(struct pci_controller* hose, - phys_addr_t addr, unsigned long flags); + pci_addr_t addr, unsigned long flags); +extern pci_addr_t pci_hose_phys_to_bus(struct pci_controller* hose, + phys_addr_t addr, unsigned long flags); #define pci_phys_to_bus(dev, addr, flags) \ pci_hose_phys_to_bus(pci_bus_to_hose(PCI_BUS(dev)), (addr), (flags)) @@ -483,8 +491,8 @@ extern int pci_hose_scan_bus(struct pci_controller *hose, int bus); extern void pciauto_region_init(struct pci_region* res); -extern void pciauto_region_align(struct pci_region *res, unsigned long size); -extern int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar); +extern void pciauto_region_align(struct pci_region *res, pci_size_t size); +extern int pciauto_region_allocate(struct pci_region* res, pci_size_t size, pci_addr_t *bar); extern void pciauto_setup_device(struct pci_controller *hose, pci_dev_t dev, int bars_num, struct pci_region *mem, @@ -500,7 +508,7 @@ extern int pci_hose_config_device(struct pci_controller *hose, pci_dev_t dev, unsigned long io, - unsigned long mem, + pci_addr_t mem, unsigned long command); #ifdef CONFIG_MPC824X