ppc4xx: Add PPC405EX support

Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/include/405_mal.h b/include/405_mal.h
index 2a42184..7ea4eb1 100644
--- a/include/405_mal.h
+++ b/include/405_mal.h
@@ -92,7 +92,9 @@
 #define MAL_ESR_PBEI	  0x00000001
       /* ^^			 ^^   */
       /* Mal IER		      */
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 #define MAL_IER_PT	  0x00000080
 #define MAL_IER_PRE	  0x00000040
 #define MAL_IER_PWE	  0x00000020
diff --git a/include/4xx_i2c.h b/include/4xx_i2c.h
index 66b7997..7c79bd1 100644
--- a/include/4xx_i2c.h
+++ b/include/4xx_i2c.h
@@ -43,7 +43,7 @@
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define I2C_BASE_ADDR	(CFG_PERIPHERAL_BASE + 0x00000700 + I2C_BUS_OFFS)
-#elif defined(CONFIG_440)
+#elif defined(CONFIG_440) || defined(CONFIG_405EX)
 /* all remaining 440 variants */
 #define I2C_BASE_ADDR	(CFG_PERIPHERAL_BASE + 0x00000400 + I2C_BUS_OFFS)
 #else
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 0a160e2..451ee94 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -765,6 +765,10 @@
 #define PVR_405EP_RA	0x51210950
 #define PVR_405GPR_RB	0x50910951
 #define PVR_405EZ_RA	0x41511460
+#define PVR_405EXR1_RA	0x12911473 /* 405EXr rev A with Security */
+#define PVR_405EXR2_RA	0x12911471 /* 405EXr rev A without Security */
+#define PVR_405EX1_RA	0x12911477 /* 405EX rev A with Security */
+#define PVR_405EX2_RA	0x12911475 /* 405EX rev A without Security */
 #define PVR_440GP_RB	0x40120440
 #define PVR_440GP_RC	0x40120481
 #define PVR_440EP_RA	0x42221850
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 464f6b5..bd9b6f7 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -84,6 +84,7 @@
     defined(CONFIG_405CR) || \
     defined(CONFIG_405EP) || \
     defined(CONFIG_405EZ) || \
+    defined(CONFIG_405EX) || \
     defined(CONFIG_440)
 	unsigned char	bi_s_version[4];	/* Version of this structure */
 	unsigned char	bi_r_version[32];	/* Version of the ROM (AMCC) */
diff --git a/include/common.h b/include/common.h
index aca281b..9865591 100644
--- a/include/common.h
+++ b/include/common.h
@@ -266,7 +266,7 @@
     int	   pci_pre_init	       (struct pci_controller * );
 #endif
 
-#if defined(CONFIG_PCI) && defined(CONFIG_440)
+#if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
 #   if defined(CFG_PCI_TARGET_INIT)
 	void	pci_target_init	     (struct pci_controller *);
 #   endif
@@ -274,7 +274,7 @@
 	void	pci_master_init	     (struct pci_controller *);
 #   endif
     int	    is_pci_host		(struct pci_controller *);
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_405EX)
    void pcie_setup_hoses(int busno);
 #endif
 #endif
diff --git a/include/ppc405.h b/include/ppc405.h
index 0c7bf3e..82bc25e 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -123,6 +123,40 @@
 #define uicvr        (UIC_DCR_BASE+0x7)  /* UIC vector                       */
 #define uicvcr       (UIC_DCR_BASE+0x8)  /* UIC vector configuration         */
 
+#if defined(CONFIG_405EX)
+#define uic0sr        uicsr		/* UIC status            */
+#define uic0srs       uicsrs		/* UIC status set        */
+#define uic0er        uicer		/* UIC enable            */
+#define uic0cr        uiccr		/* UIC critical          */
+#define uic0pr        uicpr		/* UIC polarity          */
+#define uic0tr        uictr		/* UIC triggering        */
+#define uic0msr       uicmsr		/* UIC masked status     */
+#define uic0vr        uicvr		/* UIC vector            */
+#define uic0vcr       uicvcr		/* UIC vector configuration*/
+
+#define UIC_DCR_BASE1 0xd0
+#define uic1sr        (UIC_DCR_BASE1+0x0)  /* UIC status            */
+#define uic1srs       (UIC_DCR_BASE1+0x1)  /* UIC status set        */
+#define uic1er        (UIC_DCR_BASE1+0x2)  /* UIC enable            */
+#define uic1cr        (UIC_DCR_BASE1+0x3)  /* UIC critical          */
+#define uic1pr        (UIC_DCR_BASE1+0x4)  /* UIC polarity          */
+#define uic1tr        (UIC_DCR_BASE1+0x5)  /* UIC triggering        */
+#define uic1msr       (UIC_DCR_BASE1+0x6)  /* UIC masked status     */
+#define uic1vr        (UIC_DCR_BASE1+0x7)  /* UIC vector            */
+#define uic1vcr       (UIC_DCR_BASE1+0x8)  /* UIC vector configuration*/
+
+#define UIC_DCR_BASE2 0xe0
+#define uic2sr        (UIC_DCR_BASE2+0x0)  /* UIC status            */
+#define uic2srs       (UIC_DCR_BASE2+0x1)  /* UIC status set        */
+#define uic2er        (UIC_DCR_BASE2+0x2)  /* UIC enable            */
+#define uic2cr        (UIC_DCR_BASE2+0x3)  /* UIC critical          */
+#define uic2pr        (UIC_DCR_BASE2+0x4)  /* UIC polarity          */
+#define uic2tr        (UIC_DCR_BASE2+0x5)  /* UIC triggering        */
+#define uic2msr       (UIC_DCR_BASE2+0x6)  /* UIC masked status     */
+#define uic2vr        (UIC_DCR_BASE2+0x7)  /* UIC vector            */
+#define uic2vcr       (UIC_DCR_BASE2+0x8)  /* UIC vector configuration*/
+#endif
+
 /*-----------------------------------------------------------------------------+
 |  Universal interrupt controller interrupts
 +-----------------------------------------------------------------------------*/
@@ -166,6 +200,116 @@
 #define UIC_EXT3	0x00000002	/* External  interrupt 3	*/
 #define UIC_EXT4	0x00000001	/* External  interrupt 4	*/
 
+#elif defined(CONFIG_405EX)
+
+/* UIC 0 */
+#define UIC_U0			0x80000000      /* */
+#define UIC_U1			0x40000000      /* */
+#define UIC_IIC0		0x20000000      /* */
+#define UIC_PKA			0x10000000      /* */
+#define UIC_TRNG		0x08000000      /* */
+#define UIC_EBM			0x04000000      /* */
+#define UIC_BGI			0x02000000      /* */
+#define UIC_IIC1		0x01000000      /* */
+#define UIC_SPI			0x00800000      /* */
+#define UIC_EIRQ0		0x00400000      /**/
+#define UIC_MTE			0x00200000      /*MAL Tx EOB */
+#define UIC_MRE			0x00100000      /*MAL Rx EOB */
+#define UIC_DMA0		0x00080000      /* */
+#define UIC_DMA1		0x00040000      /* */
+#define UIC_DMA2		0x00020000      /* */
+#define UIC_DMA3		0x00010000      /* */
+#define UIC_PCIE0AL		0x00008000      /* */
+#define UIC_PCIE0VPD		0x00004000      /* */
+#define UIC_RPCIE0HRST		0x00002000      /* */
+#define UIC_FPCIE0HRST		0x00001000      /* */
+#define UIC_PCIE0TCR		0x00000800      /* */
+#define UIC_PCIEMSI0		0x00000400      /* */
+#define UIC_PCIEMSI1		0x00000200      /* */
+#define UIC_SECURITY		0x00000100      /* */
+#define UIC_ENET		0x00000080      /* */
+#define UIC_ENET1		0x00000040      /* */
+#define UIC_PCIEMSI2		0x00000020      /* */
+#define UIC_EIRQ4		0x00000010      /**/
+#define UIC_UIC2NC		0x00000008      /* */
+#define UIC_UIC2C		0x00000004      /* */
+#define UIC_UIC1NC		0x00000002      /* */
+#define UIC_UIC1C		0x00000001      /* */
+
+#define UIC_MAL_TXEOB 		UIC_MTE/* MAL TXEOB                          */
+#define UIC_MAL_RXEOB 		UIC_MRE/* MAL RXEOB                          */
+/* UIC 1 */
+#define UIC_MS			0x80000000      /* MAL SERR */
+#define UIC_MTDE		0x40000000      /* MAL TXDE */
+#define UIC_MRDE		0x20000000      /* MAL RXDE */
+#define UIC_PCIE0BMVC0		0x10000000      /* */
+#define UIC_PCIE0DCRERR		0x08000000      /* */
+#define UIC_EBC			0x04000000      /* */
+#define UIC_NDFC		0x02000000      /* */
+#define UIC_PCEI1DCRERR		0x01000000      /* */
+#define UIC_GPTCMPT8		0x00800000      /* */
+#define UIC_GPTCMPT9		0x00400000      /* */
+#define UIC_PCIE1AL		0x00200000      /* */
+#define UIC_PCIE1VPD		0x00100000      /* */
+#define UIC_RPCE1HRST		0x00080000      /* */
+#define UIC_FPCE1HRST		0x00040000      /* */
+#define UIC_PCIE1TCR		0x00020000      /* */
+#define UIC_PCIE1VC0		0x00010000      /* */
+#define UIC_GPTCMPT3		0x00008000      /* */
+#define UIC_GPTCMPT4		0x00004000      /* */
+#define UIC_EIRQ7		0x00002000      /* */
+#define UIC_EIRQ8		0x00001000      /* */
+#define UIC_EIRQ9		0x00000800      /* */
+#define UIC_GPTCMP5		0x00000400      /* */
+#define UIC_GPTCMP6		0x00000200      /* */
+#define UIC_GPTCMP7		0x00000100      /* */
+#define UIC_SROM		0x00000080      /* SERIAL ROM*/
+#define UIC_GPTDECPULS		0x00000040      /* GPT Decrement pulse*/
+#define UIC_EIRQ2		0x00000020      /* */
+#define UIC_EIRQ5		0x00000010      /* */
+#define UIC_EIRQ6		0x00000008      /* */
+#define UIC_EMAC0WAKE		0x00000004      /* */
+#define UIC_EIRQ1		0x00000002      /* */
+#define UIC_EMAC1WAKE		0x00000001      /* */
+#define UIC_MAL_SERR		UIC_MS 		/* MAL SERR     */
+#define UIC_MAL_TXDE		UIC_MTDE		/* MAL TXDE     */
+#define UIC_MAL_RXDE		UIC_MRDE 		/* MAL RXDE     */
+/* UIC 2 */
+#define UIC_PCIE0INTA		0x80000000      /* PCIE0 INTA*/
+#define UIC_PCIE0INTB		0x40000000      /* PCIE0 INTB*/
+#define UIC_PCIE0INTC		0x20000000      /* PCIE0 INTC*/
+#define UIC_PCIE0INTD		0x10000000      /* PCIE0 INTD*/
+#define UIC_EIRQ3		0x08000000      /* External IRQ 3*/
+#define UIC_DDRMCUE		0x04000000      /* */
+#define UIC_DDRMCCE		0x02000000      /* */
+#define UIC_MALINTCOATX0	0x01000000      /* Interrupt coalecence TX0*/
+#define UIC_MALINTCOATX1	0x00800000      /* Interrupt coalecence TX1*/
+#define UIC_MALINTCOARX0	0x00400000      /* Interrupt coalecence RX0*/
+#define UIC_MALINTCOARX1	0x00200000      /* Interrupt coalecence RX1*/
+#define UIC_PCIE1INTA		0x00100000      /* PCIE0 INTA*/
+#define UIC_PCIE1INTB		0x00080000      /* PCIE0 INTB*/
+#define UIC_PCIE1INTC		0x00040000      /* PCIE0 INTC*/
+#define UIC_PCIE1INTD		0x00020000      /* PCIE0 INTD*/
+#define UIC_RPCIEMSI2		0x00010000      /* MSI level 2 Note this looks same as uic0-26*/
+#define UIC_PCIEMSI3		0x00008000      /* MSI level 2*/
+#define UIC_PCIEMSI4		0x00004000      /* MSI level 2*/
+#define UIC_PCIEMSI5		0x00002000      /* MSI level 2*/
+#define UIC_PCIEMSI6		0x00001000      /* MSI level 2*/
+#define UIC_PCIEMSI7		0x00000800      /* MSI level 2*/
+#define UIC_PCIEMSI8		0x00000400      /* MSI level 2*/
+#define UIC_PCIEMSI9		0x00000200      /* MSI level 2*/
+#define UIC_PCIEMSI10		0x00000100      /* MSI level 2*/
+#define UIC_PCIEMSI11		0x00000080      /* MSI level 2*/
+#define UIC_PCIEMSI12		0x00000040      /* MSI level 2*/
+#define UIC_PCIEMSI13		0x00000020      /* MSI level 2*/
+#define UIC_PCIEMSI14		0x00000010      /* MSI level 2*/
+#define UIC_PCIEMSI15		0x00000008      /* MSI level 2*/
+#define UIC_PLB4XAHB		0x00000004      /* PLBxAHB bridge*/
+#define UIC_USBWAKE		0x00000002      /* USB wakup*/
+#define UIC_USBOTG		0x00000001      /*  USB OTG*/
+#define UIC_ETH0	UIC_ENET
+#define UIC_ETH1	UIC_ENET1
+
 #else	/* !defined(CONFIG_405EZ) */
 
 #define UIC_UART0     0x80000000      /* UART 0                             */
@@ -256,7 +400,11 @@
 /******************************************************************************
  * Power Management
  ******************************************************************************/
+#ifdef CONFIG_405EX
+#define POWERMAN_DCR_BASE 0xb0
+#else
 #define POWERMAN_DCR_BASE 0xb8
+#endif
 #define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status             */
 #define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable             */
 #define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force              */
@@ -561,16 +709,6 @@
 #define VCO_MIN     500
 #define VCO_MAX     1000
 #elif defined(CONFIG_405EZ)
-/******************************************************************************
- * SDR Registers
- ******************************************************************************/
-#define SDR_DCR_BASE 0x0E
-#define sdrcfga (SDR_DCR_BASE+0x0)	/* ADDR */
-#define sdrcfgd (SDR_DCR_BASE+0x1)	/* Data */
-
-#define mtsdr(reg, data)	do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } while (0)
-#define mfsdr(reg, data)	do { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } while (0)
-
 #define sdrnand0	0x4000
 #define sdrultra0	0x4040
 #define sdrultra1	0x4050
@@ -1214,6 +1352,25 @@
 #define GPIO1_ISR3L		(GPIO1_BASE+0x40)
 #define GPIO1_ISR3H		(GPIO1_BASE+0x44)
 
+#elif defined(CONFIG_405EX)
+#define GPIO_BASE  0xEF600800
+#define GPIO0_OR               (GPIO_BASE+0x0)
+#define GPIO0_TCR              (GPIO_BASE+0x4)
+#define GPIO0_OSRL             (GPIO_BASE+0x8)
+#define GPIO0_OSRH             (GPIO_BASE+0xC)
+#define GPIO0_TSRL             (GPIO_BASE+0x10)
+#define GPIO0_TSRH             (GPIO_BASE+0x14)
+#define GPIO0_ODR              (GPIO_BASE+0x18)
+#define GPIO0_IR               (GPIO_BASE+0x1C)
+#define GPIO0_RR1              (GPIO_BASE+0x20)
+#define GPIO0_RR2              (GPIO_BASE+0x24)
+#define GPIO0_ISR1L            (GPIO_BASE+0x30)
+#define GPIO0_ISR1H            (GPIO_BASE+0x34)
+#define GPIO0_ISR2L            (GPIO_BASE+0x38)
+#define GPIO0_ISR2H            (GPIO_BASE+0x3C)
+#define GPIO0_ISR3L            (GPIO_BASE+0x40)
+#define GPIO0_ISR3H            (GPIO_BASE+0x44)
+
 #else	/* !405EZ */
 
 #define GPIO_BASE  0xEF600700
@@ -1234,33 +1391,489 @@
 
 #endif /* CONFIG_405EZ */
 
-/*
- * Macro for accessing the indirect EBC register
- */
-#define mtebc(reg, data)  mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
-#define mfebc(reg, data)  mtdcr(ebccfga,reg);data = mfdcr(ebccfgd)
+#if defined(CONFIG_405EX)
+#define SDR0_SRST		0x0200
 
-#define mtsdram(reg, data)	do { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } while (0)
-#define mfsdram(reg, data)	do { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } while (0)
+#define SDRAM_BESR0	0x00
+#define SDRAM_BEARL	0x02
+#define SDRAM_BEARU	0x03
+#define SDRAM_WMIRQ	0x06	/**/
+#define SDRAM_PLBOPT	0x08	/**/
+#define SDRAM_PUABA	0x09	/**/
+#define SDRAM_MCSTAT    0x1F    /* memory controller status           */
+#define SDRAM_MCOPT1    0x20    /* memory controller options 1        */
+#define SDRAM_MCOPT2    0x21    /* memory controller options 2        */
+#define SDRAM_MODT0     0x22    /* on die termination for bank 0      */
+#define SDRAM_MODT1     0x23    /* on die termination for bank 1      */
+#define SDRAM_MODT2     0x24    /* on die termination for bank 2      */
+#define SDRAM_MODT3     0x25    /* on die termination for bank 3      */
+#define SDRAM_CODT      0x26    /* on die termination for controller  */
+#define SDRAM_VVPR      0x27    /* variable VRef programmming         */
+#define SDRAM_OPARS     0x28    /* on chip driver control setup       */
+#define SDRAM_OPART     0x29    /* on chip driver control trigger     */
+#define SDRAM_RTR       0x30    /* refresh timer                      */
+#define SDRAM_PMIT      0x34    /* power management idle timer        */
+#define SDRAM_MB0CF     0x40    /* memory bank 0 configuration        */
+#define SDRAM_MB1CF     0x44    /* memory bank 1 configuration        */
+#define SDRAM_MB2CF     0x48    /* memory bank 2 configuration        */
+#define SDRAM_MB3CF     0x4C    /* memory bank 3 configuration        */
+#define SDRAM_INITPLR0  0x50    /* manual initialization control      */
+#define SDRAM_INITPLR1  0x51    /* manual initialization control      */
+#define SDRAM_INITPLR2  0x52    /* manual initialization control      */
+#define SDRAM_INITPLR3  0x53    /* manual initialization control      */
+#define SDRAM_INITPLR4  0x54    /* manual initialization control      */
+#define SDRAM_INITPLR5  0x55    /* manual initialization control      */
+#define SDRAM_INITPLR6  0x56    /* manual initialization control      */
+#define SDRAM_INITPLR7  0x57    /* manual initialization control      */
+#define SDRAM_INITPLR8  0x58    /* manual initialization control      */
+#define SDRAM_INITPLR9  0x59    /* manual initialization control      */
+#define SDRAM_INITPLR10 0x5a    /* manual initialization control      */
+#define SDRAM_INITPLR11 0x5b    /* manual initialization control      */
+#define SDRAM_INITPLR12 0x5c    /* manual initialization control      */
+#define SDRAM_INITPLR13 0x5d    /* manual initialization control      */
+#define SDRAM_INITPLR14 0x5e    /* manual initialization control      */
+#define SDRAM_INITPLR15 0x5f    /* manual initialization control      */
+#define SDRAM_RQDC      0x70    /* read DQS delay control             */
+#define SDRAM_RFDC      0x74    /* read feedback delay control        */
+#define SDRAM_RDCC      0x78    /* read data capture control          */
+#define SDRAM_DLCR      0x7A    /* delay line calibration             */
+#define SDRAM_CLKTR     0x80    /* DDR clock timing                   */
+#define SDRAM_WRDTR     0x81    /* write data, DQS, DM clock, timing  */
+#define SDRAM_SDTR1     0x85    /* DDR SDRAM timing 1                 */
+#define SDRAM_SDTR2     0x86    /* DDR SDRAM timing 2                 */
+#define SDRAM_SDTR3     0x87    /* DDR SDRAM timing 3                 */
+#define SDRAM_MMODE     0x88    /* memory mode                        */
+#define SDRAM_MEMODE    0x89    /* memory extended mode               */
+#define SDRAM_ECCCR     0x98    /* ECC error status                   */
+#define SDRAM_RID       0xF8    /* revision ID                        */
+
+/*-----------------------------------------------------------------------------+
+|  Memory Bank 0-7 configuration
++-----------------------------------------------------------------------------*/
+#define SDRAM_RXBAS_SDSZ_4         0x00000000      /*   4M                    */
+#define SDRAM_RXBAS_SDSZ_8         0x00001000      /*   8M                    */
+#define SDRAM_RXBAS_SDSZ_16        0x00002000      /*  16M                    */
+#define SDRAM_RXBAS_SDSZ_32        0x00003000      /*  32M                    */
+#define SDRAM_RXBAS_SDSZ_64        0x00004000      /*  64M                    */
+#define SDRAM_RXBAS_SDSZ_128       0x00005000      /* 128M                    */
+#define SDRAM_RXBAS_SDSZ_256       0x00006000      /* 256M                    */
+#define SDRAM_RXBAS_SDSZ_512       0x00007000      /* 512M                    */
+#define SDRAM_RXBAS_SDSZ_1024      0x00008000      /* 1024M                   */
+#define SDRAM_RXBAS_SDSZ_2048      0x00009000      /* 2048M                   */
+#define SDRAM_RXBAS_SDSZ_4096      0x0000a000      /* 4096M                   */
+#define SDRAM_RXBAS_SDSZ_8192      0x0000b000      /* 8192M                   */
+
+/*-----------------------------------------------------------------------------+
+|  Memory Controller Status
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCSTAT_MIC_MASK       0x80000000  /* Memory init status mask    */
+#define   SDRAM_MCSTAT_MIC_NOTCOMP  0x00000000  /* Mem init not complete      */
+#define   SDRAM_MCSTAT_MIC_COMP     0x80000000  /* Mem init complete          */
+#define SDRAM_MCSTAT_SRMS_MASK      0x80000000  /* Mem self refresh stat mask */
+#define   SDRAM_MCSTAT_SRMS_NOT_SF  0x00000000  /* Mem not in self refresh    */
+#define   SDRAM_MCSTAT_SRMS_SF      0x80000000  /* Mem in self refresh        */
+
+/*-----------------------------------------------------------------------------+
+|  Memory Controller Options 1
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCOPT1_MCHK_MASK       0x30000000 /* Memory data err check mask */
+#define   SDRAM_MCOPT1_MCHK_NON      0x00000000 /* No ECC generation          */
+#define   SDRAM_MCOPT1_MCHK_GEN      0x20000000 /* ECC generation             */
+#define   SDRAM_MCOPT1_MCHK_CHK      0x10000000 /* ECC generation and check   */
+#define   SDRAM_MCOPT1_MCHK_CHK_REP  0x30000000 /* ECC generation, chk, report*/
+#define   SDRAM_MCOPT1_MCHK_CHK_DECODE(n)  ((((unsigned long)(n))>>28)&0x3)
+#define SDRAM_MCOPT1_RDEN_MASK       0x08000000 /* Registered DIMM mask       */
+#define   SDRAM_MCOPT1_RDEN          0x08000000 /* Registered DIMM enable     */
+#define SDRAM_MCOPT1_PMU_MASK        0x06000000 /* Page management unit mask  */
+#define   SDRAM_MCOPT1_PMU_CLOSE     0x00000000 /* PMU Close                  */
+#define   SDRAM_MCOPT1_PMU_OPEN      0x04000000 /* PMU Open                   */
+#define   SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose              */
+#define SDRAM_MCOPT1_DMWD_MASK       0x01000000 /* DRAM width mask            */
+#define   SDRAM_MCOPT1_DMWD_32       0x00000000 /* 32 bits                    */
+#define   SDRAM_MCOPT1_DMWD_64       0x01000000 /* 64 bits                    */
+#define SDRAM_MCOPT1_UIOS_MASK       0x00C00000 /* Unused IO State            */
+#define SDRAM_MCOPT1_BCNT_MASK       0x00200000 /* Bank count                 */
+#define   SDRAM_MCOPT1_4_BANKS       0x00000000 /* 4 Banks                    */
+#define   SDRAM_MCOPT1_8_BANKS       0x00200000 /* 8 Banks                    */
+#define SDRAM_MCOPT1_DDR_TYPE_MASK   0x00100000 /* DDR Memory Type mask       */
+#define   SDRAM_MCOPT1_DDR1_TYPE     0x00000000 /* DDR1 Memory Type           */
+#define   SDRAM_MCOPT1_DDR2_TYPE     0x00100000 /* DDR2 Memory Type           */
+#define   SDRAM_MCOPT1_QDEP          0x00020000 /* 4 commands deep            */
+#define SDRAM_MCOPT1_RWOO_MASK       0x00008000 /* Out of Order Read mask     */
+#define   SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled                   */
+#define   SDRAM_MCOPT1_RWOO_ENABLED  0x00008000 /* enabled                    */
+#define SDRAM_MCOPT1_WOOO_MASK       0x00004000 /* Out of Order Write mask    */
+#define   SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled                   */
+#define   SDRAM_MCOPT1_WOOO_ENABLED  0x00004000 /* enabled                    */
+#define SDRAM_MCOPT1_DCOO_MASK       0x00002000 /* All Out of Order mask      */
+#define   SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled                   */
+#define   SDRAM_MCOPT1_DCOO_ENABLED  0x00000000 /* enabled                    */
+#define SDRAM_MCOPT1_DREF_MASK       0x00001000 /* Deferred refresh mask      */
+#define   SDRAM_MCOPT1_DREF_NORMAL   0x00000000 /* normal refresh             */
+#define   SDRAM_MCOPT1_DREF_DEFER_4  0x00001000 /* defer up to 4 refresh cmd  */
+
+/*-----------------------------------------------------------------------------+
+|  Memory Controller Options 2
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCOPT2_SREN_MASK        0x80000000 /* Self Test mask            */
+#define   SDRAM_MCOPT2_SREN_EXIT      0x00000000 /* Self Test exit            */
+#define   SDRAM_MCOPT2_SREN_ENTER     0x80000000 /* Self Test enter           */
+#define SDRAM_MCOPT2_PMEN_MASK        0x40000000 /* Power Management mask     */
+#define   SDRAM_MCOPT2_PMEN_DISABLE   0x00000000 /* disable                   */
+#define   SDRAM_MCOPT2_PMEN_ENABLE    0x40000000 /* enable                    */
+#define SDRAM_MCOPT2_IPTR_MASK        0x20000000 /* Init Trigger Reg mask     */
+#define   SDRAM_MCOPT2_IPTR_IDLE      0x00000000 /* idle                      */
+#define   SDRAM_MCOPT2_IPTR_EXECUTE   0x20000000 /* execute preloaded init    */
+#define SDRAM_MCOPT2_XSRP_MASK        0x10000000 /* Exit Self Refresh Prevent */
+#define   SDRAM_MCOPT2_XSRP_ALLOW     0x00000000 /* allow self refresh exit   */
+#define   SDRAM_MCOPT2_XSRP_PREVENT   0x10000000 /* prevent self refresh exit */
+#define SDRAM_MCOPT2_DCEN_MASK        0x08000000 /* SDRAM Controller Enable   */
+#define   SDRAM_MCOPT2_DCEN_DISABLE   0x00000000 /* SDRAM Controller Enable   */
+#define   SDRAM_MCOPT2_DCEN_ENABLE    0x08000000 /* SDRAM Controller Enable   */
+#define SDRAM_MCOPT2_ISIE_MASK        0x04000000 /* Init Seq Interruptable mas*/
+#define   SDRAM_MCOPT2_ISIE_DISABLE   0x00000000 /* disable                   */
+#define   SDRAM_MCOPT2_ISIE_ENABLE    0x04000000 /* enable                    */
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Refresh Timer Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RTR_RINT_MASK       0xFFF80000
+#define   SDRAM_RTR_RINT_ENCODE(n)  ((((unsigned long)(n))&0xFFF8)<<16)
+#define   SDRAM_RTR_RINT_DECODE(n)  ((((unsigned long)(n))>>16)&0xFFF8)
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Read DQS Delay Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RQDC_RQDE_MASK        0x80000000
+#define   SDRAM_RQDC_RQDE_DISABLE   0x00000000
+#define   SDRAM_RQDC_RQDE_ENABLE    0x80000000
+#define SDRAM_RQDC_RQFD_MASK        0x000001FF
+#define   SDRAM_RQDC_RQFD_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
+
+#define SDRAM_RQDC_RQFD_MAX         0xFF
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Read Data Capture Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RDCC_RDSS_MASK        0xC0000000
+#define   SDRAM_RDCC_RDSS_T1        0x00000000
+#define   SDRAM_RDCC_RDSS_T2        0x40000000
+#define   SDRAM_RDCC_RDSS_T3        0x80000000
+#define   SDRAM_RDCC_RDSS_T4        0xC0000000
+#define SDRAM_RDCC_RSAE_MASK        0x00000001
+#define   SDRAM_RDCC_RSAE_DISABLE   0x00000001
+#define   SDRAM_RDCC_RSAE_ENABLE    0x00000000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Read Feedback Delay Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RFDC_ARSE_MASK        0x80000000
+#define   SDRAM_RFDC_ARSE_DISABLE   0x80000000
+#define   SDRAM_RFDC_ARSE_ENABLE    0x00000000
+#define SDRAM_RFDC_RFOS_MASK        0x007F0000
+#define   SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define SDRAM_RFDC_RFFD_MASK        0x000003FF
+#define   SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+
+#define SDRAM_RFDC_RFFD_MAX         0x4FF
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Delay Line Calibration Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_DLCR_DCLM_MASK          0x80000000
+#define   SDRAM_DLCR_DCLM_MANUEL      0x80000000
+#define   SDRAM_DLCR_DCLM_AUTO        0x00000000
+#define SDRAM_DLCR_DLCR_MASK          0x08000000
+#define   SDRAM_DLCR_DLCR_CALIBRATE   0x08000000
+#define   SDRAM_DLCR_DLCR_IDLE        0x00000000
+#define SDRAM_DLCR_DLCS_MASK          0x07000000
+#define   SDRAM_DLCR_DLCS_NOT_RUN     0x00000000
+#define   SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
+#define   SDRAM_DLCR_DLCS_COMPLETE    0x02000000
+#define   SDRAM_DLCR_DLCS_CONT_DONE   0x03000000
+#define   SDRAM_DLCR_DLCS_ERROR       0x04000000
+#define SDRAM_DLCR_DLCV_MASK          0x000001FF
+#define   SDRAM_DLCR_DLCV_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
+#define   SDRAM_DLCR_DLCV_DECODE(n) ((((unsigned long)(n))>>0)&0x1FF)
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Controller On Die Termination Register
++-----------------------------------------------------------------------------*/
+#define   SDRAM_CODT_ODT_ON                   0x80000000
+#define   SDRAM_CODT_ODT_OFF                  0x00000000
+#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK       0x00000020
+#define   SDRAM_CODT_DQS_2_5_V_DDR1           0x00000000
+#define   SDRAM_CODT_DQS_1_8_V_DDR2           0x00000020
+#define SDRAM_CODT_DQS_MASK                   0x00000010
+#define   SDRAM_CODT_DQS_DIFFERENTIAL         0x00000000
+#define   SDRAM_CODT_DQS_SINGLE_END           0x00000010
+#define   SDRAM_CODT_CKSE_DIFFERENTIAL         	0x00000000
+#define   SDRAM_CODT_CKSE_SINGLE_END           	0x00000008
+#define   SDRAM_CODT_FEEBBACK_RCV_SINGLE_END  0x00000004
+#define   SDRAM_CODT_FEEBBACK_DRV_SINGLE_END  0x00000002
+#define   SDRAM_CODT_IO_HIZ  					0x00000000
+#define   SDRAM_CODT_IO_NMODE  					0x00000001
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Mode Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_MMODE_WR_MASK              0x00000E00
+#define   SDRAM_MMODE_WR_DDR1            0x00000000
+#define   SDRAM_MMODE_WR_DDR2_3_CYC      0x00000400
+#define   SDRAM_MMODE_WR_DDR2_4_CYC      0x00000600
+#define   SDRAM_MMODE_WR_DDR2_5_CYC      0x00000800
+#define   SDRAM_MMODE_WR_DDR2_6_CYC      0x00000A00
+#define SDRAM_MMODE_DCL_MASK             0x00000070
+#define   SDRAM_MMODE_DCL_DDR1_2_0_CLK   0x00000020
+#define   SDRAM_MMODE_DCL_DDR1_2_5_CLK   0x00000060
+#define   SDRAM_MMODE_DCL_DDR1_3_0_CLK   0x00000030
+#define   SDRAM_MMODE_DCL_DDR2_2_0_CLK   0x00000020
+#define   SDRAM_MMODE_DCL_DDR2_3_0_CLK   0x00000030
+#define   SDRAM_MMODE_DCL_DDR2_4_0_CLK   0x00000040
+#define   SDRAM_MMODE_DCL_DDR2_5_0_CLK   0x00000050
+#define   SDRAM_MMODE_DCL_DDR2_6_0_CLK   0x00000060
+#define   SDRAM_MMODE_DCL_DDR2_7_0_CLK   0x00000070
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Extended Mode Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_MEMODE_DIC_MASK            0x00000002
+#define   SDRAM_MEMODE_DIC_NORMAL        0x00000000
+#define   SDRAM_MEMODE_DIC_WEAK          0x00000002
+#define SDRAM_MEMODE_DLL_MASK            0x00000001
+#define   SDRAM_MEMODE_DLL_DISABLE       0x00000001
+#define   SDRAM_MEMODE_DLL_ENABLE        0x00000000
+#define SDRAM_MEMODE_RTT_MASK 		     0x00000044
+#define   SDRAM_MEMODE_RTT_DISABLED      0x00000000
+#define   SDRAM_MEMODE_RTT_75OHM         0x00000004
+#define   SDRAM_MEMODE_RTT_150OHM        0x00000040
+#define SDRAM_MEMODE_DQS_MASK            0x00000400
+#define   SDRAM_MEMODE_DQS_DISABLE       0x00000400
+#define   SDRAM_MEMODE_DQS_ENABLE        0x00000000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Clock Timing Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_CLKTR_CLKP_MASK            0xC0000000
+#define   SDRAM_CLKTR_CLKP_0_DEG         0x00000000
+#define   SDRAM_CLKTR_CLKP_180_DEG_ADV   0x80000000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Write Timing Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_WRDTR_WDTP_1_CYC		 0x80000000
+#define SDRAM_WRDTR_LLWP_MASK            0x10000000
+#define   SDRAM_WRDTR_LLWP_DIS           0x10000000
+#define   SDRAM_WRDTR_LLWP_1_CYC         0x00000000
+#define SDRAM_WRDTR_WTR_MASK             0x0E000000
+#define   SDRAM_WRDTR_WTR_0_DEG          0x06000000
+#define   SDRAM_WRDTR_WTR_180_DEG_ADV    0x02000000
+#define   SDRAM_WRDTR_WTR_270_DEG_ADV    0x00000000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM SDTR1 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR1_LDOF_MASK        0x80000000
+#define   SDRAM_SDTR1_LDOF_1_CLK     0x00000000
+#define   SDRAM_SDTR1_LDOF_2_CLK     0x80000000
+#define SDRAM_SDTR1_RTW_MASK         0x00F00000
+#define   SDRAM_SDTR1_RTW_2_CLK      0x00200000
+#define   SDRAM_SDTR1_RTW_3_CLK      0x00300000
+#define SDRAM_SDTR1_WTWO_MASK        0x000F0000
+#define   SDRAM_SDTR1_WTWO_0_CLK     0x00000000
+#define   SDRAM_SDTR1_WTWO_1_CLK     0x00010000
+#define SDRAM_SDTR1_RTRO_MASK        0x0000F000
+#define   SDRAM_SDTR1_RTRO_1_CLK     0x00000000
+#define   SDRAM_SDTR1_RTRO_2_CLK     0x00002000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM SDTR2 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR2_RCD_MASK         0xF0000000
+#define   SDRAM_SDTR2_RCD_1_CLK      0x10000000
+#define   SDRAM_SDTR2_RCD_2_CLK      0x20000000
+#define   SDRAM_SDTR2_RCD_3_CLK      0x30000000
+#define   SDRAM_SDTR2_RCD_4_CLK      0x40000000
+#define   SDRAM_SDTR2_RCD_5_CLK      0x50000000
+#define SDRAM_SDTR2_WTR_MASK         0x0F000000
+#define   SDRAM_SDTR2_WTR_1_CLK      0x01000000
+#define   SDRAM_SDTR2_WTR_2_CLK      0x02000000
+#define   SDRAM_SDTR2_WTR_3_CLK      0x03000000
+#define   SDRAM_SDTR2_WTR_4_CLK      0x04000000
+#define   SDRAM_SDTR3_WTR_ENCODE(n)  ((((unsigned long)(n))&0xF)<<24)
+#define SDRAM_SDTR2_XSNR_MASK        0x00FF0000
+#define   SDRAM_SDTR2_XSNR_8_CLK     0x00080000
+#define   SDRAM_SDTR2_XSNR_16_CLK    0x00100000
+#define   SDRAM_SDTR2_XSNR_32_CLK    0x00200000
+#define   SDRAM_SDTR2_XSNR_64_CLK    0x00400000
+#define SDRAM_SDTR2_WPC_MASK         0x0000F000
+#define   SDRAM_SDTR2_WPC_2_CLK      0x00002000
+#define   SDRAM_SDTR2_WPC_3_CLK      0x00003000
+#define   SDRAM_SDTR2_WPC_4_CLK      0x00004000
+#define   SDRAM_SDTR2_WPC_5_CLK      0x00005000
+#define   SDRAM_SDTR2_WPC_6_CLK      0x00006000
+#define   SDRAM_SDTR3_WPC_ENCODE(n)  ((((unsigned long)(n))&0xF)<<12)
+#define SDRAM_SDTR2_RPC_MASK         0x00000F00
+#define   SDRAM_SDTR2_RPC_2_CLK      0x00000200
+#define   SDRAM_SDTR2_RPC_3_CLK      0x00000300
+#define   SDRAM_SDTR2_RPC_4_CLK      0x00000400
+#define SDRAM_SDTR2_RP_MASK          0x000000F0
+#define   SDRAM_SDTR2_RP_3_CLK       0x00000030
+#define   SDRAM_SDTR2_RP_4_CLK       0x00000040
+#define   SDRAM_SDTR2_RP_5_CLK       0x00000050
+#define   SDRAM_SDTR2_RP_6_CLK       0x00000060
+#define   SDRAM_SDTR2_RP_7_CLK       0x00000070
+#define SDRAM_SDTR2_RRD_MASK         0x0000000F
+#define   SDRAM_SDTR2_RRD_2_CLK      0x00000002
+#define   SDRAM_SDTR2_RRD_3_CLK      0x00000003
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM SDTR3 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR3_RAS_MASK         0x1F000000
+#define   SDRAM_SDTR3_RAS_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<24)
+#define SDRAM_SDTR3_RC_MASK          0x001F0000
+#define   SDRAM_SDTR3_RC_ENCODE(n)   ((((unsigned long)(n))&0x1F)<<16)
+#define SDRAM_SDTR3_XCS_MASK         0x00001F00
+#define SDRAM_SDTR3_XCS              0x00000D00
+#define SDRAM_SDTR3_RFC_MASK         0x0000003F
+#define   SDRAM_SDTR3_RFC_ENCODE(n)  ((((unsigned long)(n))&0x3F)<<0)
+
+/*-----------------------------------------------------------------------------+
+|  Memory Bank 0-1 configuration
++-----------------------------------------------------------------------------*/
+#define SDRAM_BXCF_M_AM_MASK      0x00000F00      /* Addressing mode          */
+#define   SDRAM_BXCF_M_AM_0       0x00000000      /*   Mode 0                 */
+#define   SDRAM_BXCF_M_AM_1       0x00000100      /*   Mode 1                 */
+#define   SDRAM_BXCF_M_AM_2       0x00000200      /*   Mode 2                 */
+#define   SDRAM_BXCF_M_AM_3       0x00000300      /*   Mode 3                 */
+#define   SDRAM_BXCF_M_AM_4       0x00000400      /*   Mode 4                 */
+#define   SDRAM_BXCF_M_AM_5       0x00000500      /*   Mode 5                 */
+#define   SDRAM_BXCF_M_AM_6       0x00000600      /*   Mode 6                 */
+#define   SDRAM_BXCF_M_AM_7       0x00000700      /*   Mode 7                 */
+#define   SDRAM_BXCF_M_AM_8       0x00000800      /*   Mode 8                 */
+#define   SDRAM_BXCF_M_AM_9       0x00000900      /*   Mode 9                 */
+#define SDRAM_BXCF_M_BE_MASK      0x00000001      /* Memory Bank Enable       */
+#define   SDRAM_BXCF_M_BE_DISABLE 0x00000000      /* Memory Bank Enable       */
+#define   SDRAM_BXCF_M_BE_ENABLE  0x00000001      /* Memory Bank Enable       */
+
+#define sdr_uart0	0x0120	/* UART0 Config */
+#define sdr_uart1	0x0121	/* UART1 Config */
+#define sdr_mfr		0x4300	/* SDR0_MFR reg */
+
+/* Defines for CPC0_EPRCSR register */
+#define CPC0_EPRCSR_E0NFE          0x80000000
+#define CPC0_EPRCSR_E1NFE          0x40000000
+#define CPC0_EPRCSR_E1RPP          0x00000080
+#define CPC0_EPRCSR_E0RPP          0x00000040
+#define CPC0_EPRCSR_E1ERP          0x00000020
+#define CPC0_EPRCSR_E0ERP          0x00000010
+#define CPC0_EPRCSR_E1PCI          0x00000002
+#define CPC0_EPRCSR_E0PCI          0x00000001
+
+#define cpr0_clkupd	0x020
+#define cpr0_pllc	0x040
+#define cpr0_plld	0x060
+#define cpr0_cpud	0x080
+#define cpr0_plbd	0x0a0
+#define cpr0_opbd	0x0c0
+#define cpr0_perd	0x0e0
+#define cpr0_ahbd	0x100
+#define cpr0_icfg	0x140
+
+#define SDR_PINSTP	0x0040
+#define sdr_sdcs	0x0060
+
+#define SDR0_SDCS_SDD			(0x80000000 >> 31)
+
+/* CUST0 Customer Configuration Register0 */
+#define SDR0_CUST0                   0x4000
+#define   SDR0_CUST0_MUX_E_N_G_MASK   0xC0000000     /* Mux_Emac_NDFC_GPIO */
+#define   SDR0_CUST0_MUX_EMAC_SEL     0x40000000       /* Emac Selection */
+#define   SDR0_CUST0_MUX_NDFC_SEL     0x80000000       /* NDFC Selection */
+#define   SDR0_CUST0_MUX_GPIO_SEL     0xC0000000       /* GPIO Selection */
+
+#define   SDR0_CUST0_NDFC_EN_MASK     0x20000000     /* NDFC Enable Mask */
+#define   SDR0_CUST0_NDFC_ENABLE      0x20000000       /* NDFC Enable */
+#define   SDR0_CUST0_NDFC_DISABLE     0x00000000       /* NDFC Disable */
+
+#define   SDR0_CUST0_NDFC_BW_MASK     0x10000000     /* NDFC Boot Width */
+#define   SDR0_CUST0_NDFC_BW_16_BIT   0x10000000       /* NDFC Boot Width = 16 Bit */
+#define   SDR0_CUST0_NDFC_BW_8_BIT    0x00000000       /* NDFC Boot Width =  8 Bit */
+
+#define   SDR0_CUST0_NDFC_BP_MASK     0x0F000000     /* NDFC Boot Page */
+#define   SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
+#define   SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
+
+#define   SDR0_CUST0_NDFC_BAC_MASK    0x00C00000     /* NDFC Boot Address Cycle */
+#define   SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22)
+#define   SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
+
+#define   SDR0_CUST0_NDFC_ARE_MASK    0x00200000     /* NDFC Auto Read Enable */
+#define   SDR0_CUST0_NDFC_ARE_ENABLE  0x00200000       /* NDFC Auto Read Enable */
+#define   SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000       /* NDFC Auto Read Disable */
+
+#define   SDR0_CUST0_NRB_MASK         0x00100000     /* NDFC Ready / Busy */
+#define   SDR0_CUST0_NRB_BUSY         0x00100000       /* Busy */
+#define   SDR0_CUST0_NRB_READY        0x00000000       /* Ready */
+
+#define   SDR0_CUST0_NDRSC_MASK       0x0000FFF0     /* NDFC Device Reset Count Mask */
+#define   SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
+#define   SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF)
+
+#define   SDR0_CUST0_CHIPSELGAT_MASK  0x0000000F     /* Chip Select Gating Mask */
+#define   SDR0_CUST0_CHIPSELGAT_DIS   0x00000000       /* Chip Select Gating Disable */
+#define   SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F       /* All Chip Select Gating Enable */
+#define   SDR0_CUST0_CHIPSELGAT_EN0   0x00000008       /* Chip Select0 Gating Enable */
+#define   SDR0_CUST0_CHIPSELGAT_EN1   0x00000004       /* Chip Select1 Gating Enable */
+#define   SDR0_CUST0_CHIPSELGAT_EN2   0x00000002       /* Chip Select2 Gating Enable */
+#define   SDR0_CUST0_CHIPSELGAT_EN3   0x00000001       /* Chip Select3 Gating Enable */
+#endif
+
+/******************************************************************************
+ * SDR Registers
+ ******************************************************************************/
+#define SDR_DCR_BASE	0x0E
+#define sdrcfga		(SDR_DCR_BASE+0x0)
+#define sdrcfgd		(SDR_DCR_BASE+0x1)
+
+#define CPR0_DCR_BASE	0x0C
+#define cprcfga		(CPR0_DCR_BASE+0x0)
+#define cprcfgd		(CPR0_DCR_BASE+0x1)
+
+#define mtcpr(reg, d)	do { mtdcr(cprcfga,reg);mtdcr(cprcfgd,d); } while (0)
+#define mfcpr(reg, d)	do { mtdcr(cprcfga,reg);d = mfdcr(cprcfgd); } while (0)
+
+#define mtsdr(reg, d)	do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,d); } while (0)
+#define mfsdr(reg, d)	do { mtdcr(sdrcfga,reg);d = mfdcr(sdrcfgd); } while (0)
+
+#define mtebc(reg, d)	do { mtdcr(ebccfga,reg);mtdcr(ebccfgd,d); } while (0)
+#define mfebc(reg, d)	do { mtdcr(ebccfga,reg);d = mfdcr(ebccfgd); } while (0)
+
+#define mtsdram(reg, d)	do { mtdcr(memcfga,reg);mtdcr(memcfgd,d); } while (0)
+#define mfsdram(reg, d)	do { mtdcr(memcfga,reg);d = mfdcr(memcfgd); } while (0)
 
 #ifndef __ASSEMBLY__
 
 typedef struct
 {
-  unsigned long pllFwdDiv;
-  unsigned long pllFwdDivB;
-  unsigned long pllFbkDiv;
-  unsigned long pllPlbDiv;
-  unsigned long pllPciDiv;
-  unsigned long pllExtBusDiv;
-  unsigned long pllOpbDiv;
-  unsigned long freqVCOMhz;             /* in MHz                          */
-  unsigned long freqProcessor;
-  unsigned long freqPLB;
-  unsigned long freqPCI;
-  unsigned long pciIntArbEn;            /* Internal PCI arbiter is enabled */
-  unsigned long pciClkSync;             /* PCI clock is synchronous        */
-  unsigned long freqVCOHz;
+	unsigned long pllFwdDiv;
+	unsigned long pllFwdDivB;
+	unsigned long pllFbkDiv;
+	unsigned long pllPlbDiv;
+	unsigned long pllPciDiv;
+	unsigned long pllExtBusDiv;
+	unsigned long pllOpbDiv;
+	unsigned long freqVCOMhz;	/* in MHz                          */
+	unsigned long freqProcessor;
+	unsigned long freqPLB;
+	unsigned long freqPCI;
+	unsigned long pciIntArbEn;	/* Internal PCI arbiter is enabled */
+	unsigned long pciClkSync;	/* PCI clock is synchronous        */
+	unsigned long freqVCOHz;
+	unsigned long freqOPB;
+	unsigned long freqEBC;
+	unsigned long freqDDR;
 } PPC405_SYS_INFO;
 
 #endif  /* _ASMLANGUAGE */
diff --git a/include/ppc440.h b/include/ppc440.h
index 38809f3..e77c4c3 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -3345,7 +3345,7 @@
 	unsigned long freqTmrClk;
 	unsigned long freqPLB;
 	unsigned long freqOPB;
-	unsigned long freqEPB;
+	unsigned long freqEBC;
 	unsigned long freqPCI;
 #ifdef CONFIG_440SPE
 	unsigned long freqDDR;
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index 3d8ca09..76c1d12 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -146,11 +146,12 @@
 #endif
 
 #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
-    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 #define SDR0_PFC1_EM_1000	(0x00200000)
 #endif
 
-/*ZMII Bridge Register addresses */
+/* ZMII Bridge Register addresses */
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define ZMII_BASE		(CFG_PERIPHERAL_BASE + 0x0D00)
@@ -202,6 +203,8 @@
 /* RGMII Register Addresses */
 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define RGMII_BASE		(CFG_PERIPHERAL_BASE + 0x1000)
+#elif defined(CONFIG_405EX)
+#define RGMII_BASE		(CFG_PERIPHERAL_BASE + 0xB00)
 #else
 #define RGMII_BASE		(CFG_PERIPHERAL_BASE + 0x0790)
 #endif
@@ -223,7 +226,8 @@
 #define RGMII_SSR_SP_100MBPS	(0x02)
 #define RGMII_SSR_SP_1000MBPS	(0x04)
 
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_405EX)
 #define RGMII_SSR_V(__x)	((__x) * 8)
 #else
 #define RGMII_SSR_V(__x)	((__x -2) * 8)
@@ -304,7 +308,7 @@
 #define EMAC_BASE		(CFG_PERIPHERAL_BASE + 0x0800)
 #endif
 #else
-#if defined(CONFIG_405EZ)
+#if defined(CONFIG_405EZ) || defined(CONFIG_405EX)
 #define EMAC_BASE 		0xEF600900
 #else
 #define EMAC_BASE 		0xEF600800
@@ -338,7 +342,8 @@
 /* on 440GX EMAC_MR1 has a different layout! */
 #if defined(CONFIG_440GX) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_405EX)
 /* MODE Reg 1 */
 #define EMAC_M1_FDE		(0x80000000)
 #define EMAC_M1_ILE		(0x40000000)
diff --git a/include/serial.h b/include/serial.h
index 30bfde3..e292f0c 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -22,8 +22,9 @@
 extern struct serial_device serial_scc_device;
 extern struct serial_device * default_serial_console (void);
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
-   || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_MPC5xxx)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) || \
+    defined(CONFIG_MPC5xxx)
 extern struct serial_device serial0_device;
 extern struct serial_device serial1_device;
 #if defined(CFG_NS16550_SERIAL)