* Patch by Robert Schwebel, 15 Dec 2003:
add support for cramfs (uses JFFS2 command interface)
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 3301bd9..a581e6f 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -1,6 +1,10 @@
/*
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2002
+ * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
+ * (C) Copyright 2003
+ * Kai-Uwe Bloem, Auerswald GmbH & Co KG, <linux-development@auerswald.de>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -31,6 +35,9 @@
#include <net.h>
#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+
+#include <cramfs/cramfs_fs.h>
+
static int part_num=0;
#ifndef CFG_JFFS_CUSTOM_PART
@@ -77,11 +84,13 @@
return 0;
}
#endif /* ifndef CFG_JFFS_CUSTOM_PART */
+
int
do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
struct part_info* jffs2_part_info(int);
int jffs2_1pass_load(char *, struct part_info *,const char *);
+ char *fsname;
char *filename = "uImage";
ulong offset = CFG_LOAD_ADDR;
@@ -98,17 +107,25 @@
if (0 != (part=jffs2_part_info(part_num))){
- printf("### JFFS2 loading '%s' to 0x%lx\n", filename, offset);
- size = jffs2_1pass_load((char *)offset, part, filename);
+ /* check partition type for cramfs */
+ fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2");
+ printf("### %s loading '%s' to 0x%lx\n", fsname, filename, offset);
+
+ if (cramfs_check(part)) {
+ size = cramfs_load ((char *) offset, part, filename);
+ } else {
+ /* if this is not cramfs assume jffs2 */
+ size = jffs2_1pass_load((char *)offset, part, filename);
+ }
if (size > 0) {
char buf[10];
- printf("### JFFS2 load complete: %d bytes loaded to 0x%lx\n",
- size, offset);
+ printf("### %s load complete: %d bytes loaded to 0x%lx\n",
+ fsname, size, offset);
sprintf(buf, "%x", size);
setenv("filesize", buf);
} else {
- printf("### JFFS2 LOAD ERROR<%x> for %s!\n", size, filename);
+ printf("### %s LOAD ERROR<%x> for %s!\n", fsname, size, filename);
}
return !(size > 0);
@@ -132,7 +149,13 @@
if (0 != (part=jffs2_part_info(part_num))){
- ret = jffs2_1pass_ls(jffs2_part_info(part_num), filename);
+ /* check partition type for cramfs */
+ if (cramfs_check(part)) {
+ ret = cramfs_ls (part, filename);
+ } else {
+ /* if this is not cramfs assume jffs2 */
+ ret = jffs2_1pass_ls(part, filename);
+ }
return (ret == 1);
}
@@ -143,15 +166,24 @@
int
do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- struct part_info* jffs2_part_info(int);
- int jffs2_1pass_info(struct part_info *);
-
- int ret;
+ struct part_info* jffs2_part_info(int);
+ int jffs2_1pass_info(struct part_info *);
struct part_info *part;
+ char *fsname;
+ int ret;
- if (0 != (part=jffs2_part_info(part_num))){
+ if ((part=jffs2_part_info(part_num))){
- ret = jffs2_1pass_info(jffs2_part_info(part_num));
+ /* check partition type for cramfs */
+ fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2");
+ printf("### filesystem type is %s\n", fsname);
+
+ if (cramfs_check(part)) {
+ ret = cramfs_info (part);
+ } else {
+ /* if this is not cramfs assume jffs2 */
+ ret = jffs2_1pass_info(part);
+ }
return (ret == 1);
}
@@ -163,6 +195,7 @@
do_jffs2_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int tmp_part;
+ char str_part_num[3];
struct part_info* jffs2_part_info(int);
if (argc >= 2) {
@@ -176,6 +209,8 @@
if (jffs2_part_info(tmp_part)){
printf("Partition changed to %d\n",tmp_part);
part_num=tmp_part;
+ sprintf(str_part_num, "%d", part_num);
+ setenv("partition", str_part_num);
return 0;
}
