* Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
additional ethernet addresses.
* Cleanup drivers/i82365.c - avoid duplication of code
* Fix bogus "cannot span across banks" flash error message
* Add support for CompactFlash for the CPC45 Board.
diff --git a/common/cmd_universe.c b/common/cmd_universe.c
index 6388546..a8febff 100644
--- a/common/cmd_universe.c
+++ b/common/cmd_universe.c
@@ -28,20 +28,8 @@
#include <universe.h>
-
#if (CONFIG_COMMANDS & CFG_CMD_UNIVERSE)
-#undef DBG
-
-#ifdef DBG
-# define UNI_DBG(fmt) printf fmt
-#else
-# define UNI_DBG(fmt)
-#endif
-
-#define UNI_PRINT(fmt) printf fmt
-
-
#define PCI_VENDOR PCI_VENDOR_ID_TUNDRA
#define PCI_DEVICE PCI_DEVICE_ID_TUNDRA_CA91C042
@@ -87,18 +75,18 @@
val &= ~0xf;
dev->uregs = (UNIVERSE *)val;
- UNI_DBG(("UNIVERSE-Base : %p\n", dev->uregs));
+ debug ("UNIVERSE-Base : %p\n", dev->uregs);
/* check mapping */
- UNI_DBG((" Read via mapping, PCI_ID = %08X\n", readl(&dev->uregs->pci_id)));
+ debug (" Read via mapping, PCI_ID = %08X\n", readl(&dev->uregs->pci_id));
if (((PCI_DEVICE <<16) | PCI_VENDOR) != readl(&dev->uregs->pci_id)) {
- UNI_PRINT(("UNIVERSE: Cannot read PCI-ID via Mapping: %08x\n",
- readl(&dev->uregs->pci_id)));
+ printf ("UNIVERSE: Cannot read PCI-ID via Mapping: %08x\n",
+ readl(&dev->uregs->pci_id));
result = -1;
goto break_30;
}
- UNI_DBG(("PCI_BS = %08X\n", readl(&dev->uregs->pci_bs)));
+ debug ("PCI_BS = %08X\n", readl(&dev->uregs->pci_bs));
dev->pci_bs = readl(&dev->uregs->pci_bs);
@@ -154,12 +142,12 @@
}
if (i == 4) {
- UNI_PRINT(("universe: No Image available\n"));
+ printf ("universe: No Image available\n");
result = -1;
goto exit_10;
}
- UNI_DBG(("universe: Using image %d\n", i));
+ debug ("universe: Using image %d\n", i);
writel(pciAddr , &dev->uregs->lsi[i].bs);
writel((pciAddr + size), &dev->uregs->lsi[i].bd);
@@ -219,11 +207,11 @@
writel(ctl, &dev->uregs->lsi[i].ctl);
- UNI_DBG(("universe: window-addr=%p\n", &dev->uregs->lsi[i].ctl));
- UNI_DBG(("universe: pci slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->lsi[i].ctl)));
- UNI_DBG(("universe: pci slave window[%d] bs=%08x\n", i, readl(&dev->uregs->lsi[i].bs)));
- UNI_DBG(("universe: pci slave window[%d] bd=%08x\n", i, readl(&dev->uregs->lsi[i].bd)));
- UNI_DBG(("universe: pci slave window[%d] to=%08x\n", i, readl(&dev->uregs->lsi[i].to)));
+ debug ("universe: window-addr=%p\n", &dev->uregs->lsi[i].ctl);
+ debug ("universe: pci slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->lsi[i].ctl));
+ debug ("universe: pci slave window[%d] bs=%08x\n", i, readl(&dev->uregs->lsi[i].bs));
+ debug ("universe: pci slave window[%d] bd=%08x\n", i, readl(&dev->uregs->lsi[i].bd));
+ debug ("universe: pci slave window[%d] to=%08x\n", i, readl(&dev->uregs->lsi[i].to));
return 0;
@@ -251,12 +239,12 @@
}
if (i == 4) {
- UNI_PRINT(("universe: No Image available\n"));
+ printf ("universe: No Image available\n");
result = -1;
goto exit_10;
}
- UNI_DBG(("universe: Using image %d\n", i));
+ debug ("universe: Using image %d\n", i);
writel(vmeAddr , &dev->uregs->vsi[i].bs);
writel((vmeAddr + size), &dev->uregs->vsi[i].bd);
@@ -304,11 +292,11 @@
writel(ctl, &dev->uregs->vsi[i].ctl);
- UNI_DBG(("universe: window-addr=%p\n", &dev->uregs->vsi[i].ctl));
- UNI_DBG(("universe: vme slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->vsi[i].ctl)));
- UNI_DBG(("universe: vme slave window[%d] bs=%08x\n", i, readl(&dev->uregs->vsi[i].bs)));
- UNI_DBG(("universe: vme slave window[%d] bd=%08x\n", i, readl(&dev->uregs->vsi[i].bd)));
- UNI_DBG(("universe: vme slave window[%d] to=%08x\n", i, readl(&dev->uregs->vsi[i].to)));
+ debug ("universe: window-addr=%p\n", &dev->uregs->vsi[i].ctl);
+ debug ("universe: vme slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->vsi[i].ctl));
+ debug ("universe: vme slave window[%d] bs=%08x\n", i, readl(&dev->uregs->vsi[i].bs));
+ debug ("universe: vme slave window[%d] bd=%08x\n", i, readl(&dev->uregs->vsi[i].bd));
+ debug ("universe: vme slave window[%d] to=%08x\n", i, readl(&dev->uregs->vsi[i].to));
return 0;
