Initial revision
diff --git a/common/cmd_spi.c b/common/cmd_spi.c
new file mode 100644
index 0000000..ccf9cc2
--- /dev/null
+++ b/common/cmd_spi.c
@@ -0,0 +1,116 @@
+/*
+ * (C) Copyright 2002
+ * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * SPI Read/Write Utilities
+ */
+
+#include <common.h>
+#include <command.h>
+#include <spi.h>
+#include <cmd_spi.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_SPI)
+
+#define MAX_SPI_BYTES 32 /* max number of bytes we can handle */
+
+/*
+ * External table of chip select functions (see the appropriate board
+ * support for the actual definition of the table).
+ */
+extern spi_chipsel_type spi_chipsel[];
+
+
+/*
+ * Values from last command.
+ */
+static int device;
+static int bitlen;
+static uchar dout[MAX_SPI_BYTES];
+static uchar din[MAX_SPI_BYTES];
+
+/*
+ * SPI read/write
+ *
+ * Syntax:
+ * spi {dev} {num_bits} {dout}
+ * {dev} is the device number for controlling chip select (see TBD)
+ * {num_bits} is the number of bits to send & receive (base 10)
+ * {dout} is a hexadecimal string of data to send
+ * The command prints out the hexadecimal string received via SPI.
+ */
+
+int do_spi (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+{
+ char *cp = 0;
+ uchar tmp;
+ int j;
+ int rcode = 0;
+
+ /*
+ * We use the last specified parameters, unless new ones are
+ * entered.
+ */
+
+ if ((flag & CMD_FLAG_REPEAT) == 0)
+ {
+ if (argc >= 2)
+ device = simple_strtoul(argv[1], NULL, 10);
+ if (argc >= 3)
+ bitlen = simple_strtoul(argv[2], NULL, 10);
+ if (argc >= 4)
+ cp = argv[3];
+ for(j = 0; *cp; j++, cp++) {
+ tmp = *cp - '0';
+ if(tmp > 9)
+ tmp -= ('A' - '0') - 10;
+ if(tmp > 15)
+ tmp -= ('a' - 'A');
+ if(tmp > 15) {
+ printf("Conversion error on %c, bailing out.\n", *cp);
+ break;
+ }
+ if((j % 2) == 0)
+ dout[j / 2] = (tmp << 4);
+ else
+ dout[j / 2] |= tmp;
+ }
+ }
+
+printf("spi_chipsel[%d] = %08X\n", device, (uint)spi_chipsel[device]);
+ if(spi_xfer(spi_chipsel[device], bitlen, dout, din) != 0) {
+ printf("Error with the SPI transaction.\n");
+ rcode = 1;
+ } else {
+ cp = din;
+ for(j = 0; j < ((bitlen + 7) / 8); j++) {
+ printf("%02X", *cp++);
+ }
+ printf("\n");
+ }
+
+ return rcode;
+}
+
+#endif /* CFG_CMD_SPI */
+
