mpc512x: use common code for clock setting for all mpc512x boards
Only define enabled clocks in the config file and enable
the clocks in common code.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Cc: Wolfgang Denk <wd@denx.de>
diff --git a/arch/powerpc/cpu/mpc512x/cpu_init.c b/arch/powerpc/cpu/mpc512x/cpu_init.c
index ac2605a..2f6a14f 100644
--- a/arch/powerpc/cpu/mpc512x/cpu_init.c
+++ b/arch/powerpc/cpu/mpc512x/cpu_init.c
@@ -180,6 +180,15 @@
* during FLASH chip identification etc.
*/
setbits_be32(&im->sysconf.spcr, SPCR_TBEN);
+
+ /*
+ * Enable clocks
+ */
+ out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN);
+ out_be32(&im->clk.sccr[1], SCCR2_CLOCKS_EN);
+#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE)
+ setbits_be32(&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN);
+#endif
}
int cpu_init_r (void)
