Merge with /home/stefan/git/u-boot/bamboo-nand
diff --git a/CHANGELOG b/CHANGELOG
index b07f80a..24d805e 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,1221 @@
+commit d62f64cc23a940eafe712c776b3249e4160753d1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 16 00:13:33 2007 +0200
+
+ Coding Style Cleanup, new CHANGELOG
+
+commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
+Author: Piotr Kruszynski <ppk@semihalf.com>
+Date: Thu May 10 16:55:52 2007 +0200
+
+ [Motion-PRO] Add MTD and JFFS2 support, also add default partition
+ definition.
+
+commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue May 8 15:57:43 2007 +0200
+
+ add: reading special purpose registers
+
+commit 1a50f164beb065f360fbddb76029607d6b099698
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue May 8 14:52:52 2007 +0200
+
+ add: Microblaze V5 exception handling
+
+commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue May 8 14:39:11 2007 +0200
+
+ add: FSL control read and write
+
+commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
+Author: Piotr Kruszynski <ppk@semihalf.com>
+Date: Tue May 8 13:05:44 2007 +0200
+
+ [Motion-PRO] Add support for I2C, EEPROM and RTC.
+
+commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue May 8 10:23:56 2007 +0200
+
+ [Motion-PRO] Add ATA support. Add CF-booting commands to the default
+ environment.
+
+commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue May 8 09:39:12 2007 +0200
+
+ [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
+ eliminates networking problems in Linux (timeouts).
+
+commit 1f1369c34b629be94702684d41d3fddf0f6193e7
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue May 8 09:21:57 2007 +0200
+
+ [Motion-PRO] Enable Flat Device Tree support and modify default environment
+ to allow booting of FDT-expecting kernels.
+
+commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 23:58:31 2007 +0200
+
+ new: USE_MSR_INTR support
+
+commit 008861a2f3ef2c062744d733787c7e530a1b8761
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Mon May 7 22:36:15 2007 +0200
+
+ [MPC5xxx] There are networking problems on the Motion-PRO board with
+ current PHY initalization code (tftp timeouts all the time). This commit
+ temporarily disables PHY initalization sequence to make the networking
+ operational, until a fix is found.
+
+commit abca901869c3760b6c5fecb825db6c1d91a78a93
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon May 7 22:10:36 2007 +0200
+
+ Get rid of duplicated file (see include/configs/sbc8560.h instead)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon May 7 22:07:08 2007 +0200
+
+ Get rid of duplicated file (see doc/README.SBC8560 instead)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:43:10 2007 +0200
+
+ fix: read and write MSR - repair number of parameters
+
+commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:33:51 2007 +0200
+
+ new: fsl interrupt support
+ FSL_Has_data is connected to INTC.
+
+commit 792032baa7d625e34c981ab6df521911bd8dc861
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:30:12 2007 +0200
+
+ fix: interrupt handler
+ remove asm code
+
+commit f3f001a341ef185d0f13841be5b5dc3395aacc31
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:25:08 2007 +0200
+
+ fix: remove asm code
+
+commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:12:43 2007 +0200
+
+ fix: clean interrupt
+
+commit 42efed6130c8fcf7da881385b5427065d2801757
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 17:22:25 2007 +0200
+
+ fix: interrupt handler for multiple sources
+
+commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 17:11:09 2007 +0200
+
+ new: add writing to msr register
+
+commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
+Author: Timur Tabi <timur@freescale.com>
+Date: Sat May 5 08:12:30 2007 +0200
+
+ 5xxx: write MAC address to mac-address and local-mac-address
+
+ Some device trees have a mac-address property, some have local-mac-address,
+ and some have both. To support all of these device trees, ftp_cpu_setup()
+ should write the MAC address to mac-address and local-mac-address, if they
+ exist.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
+Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+Date: Sun Apr 29 14:01:54 2007 +0200
+
+ [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
+
+ MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
+ message. Use PVR to distinguish between the two variants, and print proper CPU
+ information.
+
+ Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Wed Apr 25 16:01:26 2007 +0200
+
+ [PATCH] simplify silent console
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
+Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+Date: Mon Apr 23 15:30:39 2007 +0200
+
+ [PATCH] Avoid assigning PCI resources from zero address
+
+ If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
+ core complains and IDE drivers fails to work. Also, assigning zero to a BAR
+ was illegal according to PCI 2.1 (the later revisions seem to have excluded the
+ sentence about "0" being considered an invalid address) -- so, use a reasonable
+ starting value of 0x1000 (that's what the most Linux archs are using).
+
+ Alternatively, one might have fixed the calls to pci_set_region() individually
+ (some code even seems to have taken care of this issue) but that would have
+ been a lot more work. :-)
+
+ Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Mon Apr 23 14:00:11 2007 +0200
+
+ [patch] setenv(...) can delete environmentalvariables
+
+ update setenv() function so that entering a NULL value for the
+ variable's value will delete the environmental variable
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Apr 23 13:54:24 2007 +0200
+
+ [patch] use unsigned char in smc91111 driver for mac
+
+ the v_mac variable in the smc91111 driver is declared as a signed char ...
+ this causes problems when one of the bytes in the MAC is "signed" like 0xE0
+ because when it gets printed out, you get a display like:
+ 0xFFFFFFE0 and that's no good
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ffc50f9bb194343c6303517a517708457a5eb6b8
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat May 5 18:54:42 2007 +0200
+
+ new: FSL and MSR support #2
+
+commit f7e2e0eb0668136305f78bb9c21be79b48a34247
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat May 5 18:27:16 2007 +0200
+
+ new: FSL and MSR support
+
+commit 2f15278c2eb911c668b4fe562130b78cf554d139
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 5 18:23:11 2007 +0200
+
+ Coding stylke cleanup; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 5 18:05:02 2007 +0200
+
+ Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 5 17:15:50 2007 +0200
+
+ Make "file" command happy with some config.mk files; update CHANGELOG
+
+commit e3b8c78bc2489c27ae020986ef0eaca684866cef
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Sat May 5 08:32:14 2007 +0200
+
+ ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
+
+ The AMCC Secquoia board has been changed in a new revision from using a
+ 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
+ indicates the difference. This patch reads that bit and uses the correct
+ clock speed for the board. This code is backward compatable will all
+ prior boards. All prior boards will be read as 33.000.
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
+Author: Stefan Roese <sr@denx.de>
+Date: Sat May 5 08:29:01 2007 +0200
+
+ ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
+
+ Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
+ for the 4k NAND boot image so define bus_frequency to 133MHz here
+ which is save for the refresh counter setup.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a79886590593ba1d667c840caa4940c61639f18f
+Author: Thomas Knobloch <knobloch@siemens.com>
+Date: Sat May 5 07:04:42 2007 +0200
+
+ NAND: Wrong calculation of page number in nand_block_bad()
+
+ In case that there is no memory based bad block table available the
+ function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
+ nand_block_bad() directly. When parameter 'getchip' is set to zero,
+ nand_block_bad() will not right shift the offset to calculate the
+ correct page number.
+
+ Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 4 10:02:33 2007 +0200
+
+ Fix initrd length corruption in bootm command.
+
+ When using FDT Images, the length of an inital ramdisk was
+ overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
+
+ Patches by Timur Tabi & Johns Daniel.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu May 3 19:43:52 2007 -0500
+
+ mpc83xx: fix trivial error in MAKEALL
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 3 16:34:41 2007 +0200
+
+ Update board configuration for STX GP3SSA board:
+
+ Enable hush shell, environment in flash rather in EEPROM,
+ more user-friendly default environment, etc.
+ The simple EEPROM environment can be selected easily in the board
+ config file.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 24 14:37:49 2007 +0200
+
+ Cleanup STX GP3SSA code; fix build and compile problems.
+
+commit 35171dc04e028ecacc23ad916a66295472555dbf
+Author: Dan Malek <dan@embeddedalley.com>
+Date: Fri Jan 5 09:15:34 2007 +0100
+
+ Add support for STX GP3SSA (stxssa) Board
+
+ Signed-off-by Dan Malek, <dan@embeddedalley.com>
+
+commit ffa621a0d12a1ccd81c936c567f8917a213787a8
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sat Feb 24 01:08:13 2007 -0600
+
+ Cleaned up some 85xx PCI bugs
+
+ * Cleaned up the CDS PCI Config Tables and added NULL entries to
+ the end
+ * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
+ * Fixed 85xx PCI code to assign powar region sizes based on the
+ config values (rather than hard-coding them)
+ * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 6743105988fc44d5b0d30388c790607835aae7a6
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 02:54:25 2007 -0500
+
+ Add support for the 8568 MDS board
+
+ This included some changes to common files:
+ * Add 8568 processor SVR to various places
+ * Add support for setting the qe bus-frequency value in the dts
+ * Add the 8568MDS target to the Makefile
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
+Author: David Updegraff <dave@cray.com>
+Date: Fri Apr 20 14:34:48 2007 -0500
+
+ Add support for treating unknown PHYs as generic PHYs.
+
+ When bringing up u-boot on new boards, PHY support sometimes gets
+ neglected. Most PHYs don't really need any special support,
+ though. By adding a generic entry that always matches if nothing
+ else does, we can provide support for "unsupported" PHYs for the
+ tsec.
+
+ The generic PHY driver supports most PHYs, including gigabit.
+
+ Signed-off-by: David Updegraff <dave@cray.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit a75af9bfd8fff0499efdbb90601cec5a2afef117
+Author: James Yang <James.Yang@freescale.com>
+Date: Wed Feb 7 15:28:04 2007 -0600
+
+ Conditionalize 8641 Rev1.0 MCM workarounds
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Apr 30 13:59:50 2007 -0500
+
+ Fix memory initialization on MPC8349E-mITX
+
+ Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
+ This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
+ on some ITX boards, notably those with a revision 3.1 CPU.
+
+ Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
+ ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Michael Benedict <MBenedict@twacs.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Apr 30 15:26:21 2007 -0500
+
+ mpc83xx: replace elaborate boottime verbosity with 'clocks' command
+
+ and fix CPU: to align with Board: display text.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c1ab82669d9525998c34e802a12cad662723f22a
+Author: James Yang <James.Yang@freescale.com>
+Date: Fri Mar 16 13:02:53 2007 -0500
+
+ Rewrote picos_to_clk() to avoid rounding errors.
+ Clarified that conversion is to DRAM clocks rather than platform clocks.
+ Made function static to spd_sdram.c.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8b39501d28754e72726ce7fb02310e56dbdf116a
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Apr 29 14:13:01 2007 +0200
+
+ ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5c5d3242935cf3543af01142627494434834cf98
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Apr 25 12:34:38 2007 -0500
+
+ mpc83xx: minor fixups for 8313rdb introduction
+
+commit 144876a380f5756f57412caf74c1d6dc201dd796
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Apr 24 23:01:02 2007 +0200
+
+ [PATCH] MTD partition support, JFFS2 support
+
+commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Apr 24 14:03:45 2007 +0200
+
+ ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 02:37:47 2007 -0500
+
+ Reworked 85xx speed detection code
+
+ Changed the code to read the registers and calculate the clock
+ rates, rather than using a "switch" statement.
+
+ Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 81f481ca708ed6a56bf9c410e3191dbad581c565
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 02:24:28 2007 -0500
+
+ Enable 8544 support
+
+ * Add support to the Makefile
+ * Add 8544 configuration support to the tsec driver
+ * Add 8544 SVR numbers to processor.h
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Feb 23 17:12:25 2007 -0600
+
+ Support 1G size on 8548
+
+ e500v2 and newer cores support 1G page sizes.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Feb 23 17:11:16 2007 -0600
+
+ Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
+
+ The other pagesz constants use one letter to specify order of
+ magnitude. Also change the one reference to it in mpc8548cds/init.S
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 1f9a318cea14272edd10d63739e2d326c90f430e
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Feb 23 16:28:46 2007 -0600
+
+ Only set ddrioovcr for 8548 rev1.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sat Feb 24 01:16:45 2007 -0600
+
+ Tweak DDR ECC error counter
+
+ Enable single-bit error counter when memory was cleared by ddr controller.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Feb 12 13:34:55 2007 -0600
+
+ 85xx: write MAC address to mac-address and local-mac-address
+
+ Some device trees have a mac-address property, some have local-mac-address,
+ and some have both. To support all of these device trees, ftp_cpu_setup()
+ should write the MAC address to mac-address and local-mac-address, if they
+ exist.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 01:44:44 2007 -0500
+
+ Some 85xx cpu cleanups
+
+ * Cleaned up the TSR[WIS] clearing
+ * Cleaned up DMA initialization
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 01:32:22 2007 -0500
+
+ Add cpu support for the 8544
+
+ Recognize new SVR values, and add a few register definitions
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Apr 11 16:51:02 2007 -0500
+
+ Add MPC8544DS basic port board files.
+
+ Add board port under new board/freescale directory
+ structure and reuse existing PIXIS FPGA support there.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Apr 11 16:50:57 2007 -0500
+
+ Add MPC8544DS main configuration file.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
+Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+Date: Wed Dec 27 22:07:15 2006 +0300
+
+ Fix PCI I/O space mapping on Freescale MPC85x0ADS
+
+ The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
+ 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
+ describing the local address window used for the PCI I/O space accesses -- fix
+ this and carry over the necessary changes into the MPC8560ADS code since the
+ PCI I/O space mapping was also broken for this board (by the earlier commit
+ 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
+ the PCI I/O space must be mapped to all the MPC85xx board config. headers.
+
+ Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+
+ board/mpc8540ads/init.S | 4 ++--
+ board/mpc8560ads/init.S | 4 ++--
+ include/configs/MPC8540ADS.h | 5 ++---
+ include/configs/MPC8541CDS.h | 2 +-
+ include/configs/MPC8548CDS.h | 2 +-
+ include/configs/MPC8560ADS.h | 8 ++++----
+ 6 files changed, 12 insertions(+), 13 deletions(-)
+
+commit 96629cbabdb727d4a5e62542deefc01d498db6dc
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Tue Dec 5 16:42:30 2006 +0800
+
+ u-boot: Fix e500 v2 core reset bug
+
+ The following patch fixes the e500 v2 core reset bug.
+ For e500 v2 core, a new reset control register is added to reset the
+ processor.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 63247a5acd58032e6cf33f525bc3923b467bac88
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Wed Dec 20 11:01:00 2006 +0800
+
+ u-boot: v2: Remove the fixed TLB and LAW entrynubmer
+
+ Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
+ entry number to control the loop. This can reduce the potential risk
+ for the 85xx processor increasing its TLB adn LAW entry number.
+
+ Signed-off-by: Swarthout Edward <swarthout@freescale.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Mon Dec 18 17:01:04 2006 +0800
+
+ u-boot: Fix the 85xxcds tsec bug
+
+ Fix the 85xxcds tsec bug.
+ When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 7337b237ffc4aaf1b9467024fe472a880d852598
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Fri Dec 15 14:43:31 2006 +0800
+
+ u-boot: Fix CPU2 errata on MPC8548CDS board
+
+ This patch apply workaround of CPU2 errata on MPC8548CDS board.
+
+ Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
+
+commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
+Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
+Date: Mon Dec 18 16:25:15 2006 +0800
+
+ u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
+
+ This patch disables MPC8548CDS 2T_TIMING for DDR by default.
+
+ Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
+
+commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Thu Dec 14 14:14:55 2006 +0800
+
+ u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
+
+ Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
+ board.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 96b8a05432f346f36493535c85320b70ec9c7c1b
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:54:15 2007 -0500
+
+ mpc83xx: Add MPC8313ERDB support.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 49ea3b6eafe606285ae4d5c378026153dde53200
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:21 2007 -0500
+
+ mpc83xx: Add generic PCI setup code.
+
+ Board code can now request the generic setup code rather than having to
+ copy-and-paste it for themselves. Boards should be converted to use this
+ once they're tested with it.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:19 2007 -0500
+
+ mpc83xx: Add 831x support to speed.c.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:18 2007 -0500
+
+ mpc83xx: Add 831x support to global_data.h
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:16 2007 -0500
+
+ mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
+
+ Rather than misleadingly define PVR_83xx as the specific type of 83xx
+ being built for, the PVR of each core revision is defined. checkcpu() now
+ prints the core that it detects, rather than aborting if it doesn't find
+ what it thinks it wants.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:15 2007 -0500
+
+ mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit d87c57b201b4572d16f1b642998faa00c9912b16
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:31:55 2007 -0500
+
+ mpc83xx: Add register definitions for MPC831x.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Apr 23 12:00:22 2007 +0200
+
+ Remove BOARDLIBS usage completely
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 32556443840f127170e4baa8bdd5b567039f6c36
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Apr 21 21:07:22 2007 +0200
+
+ [PATCH] SystemACE support for Microblaze
+
+commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Apr 21 21:02:40 2007 +0200
+
+ 16bit read/write little endian
+
+commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Apr 21 20:53:31 2007 +0200
+
+ Change ML401 parameters - Xilinx BSP
+
+commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Feb 28 05:37:29 2007 -0600
+
+ mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Fri Jan 19 10:42:37 2007 +0800
+
+ Enable LAWs for MPC8641 PCI-Ex2.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit bd7851ce1e1f140665b520026abf1042968b1102
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Apr 20 14:12:26 2007 -0500
+
+ mpc86xx; Write MAC address to mac-address and local-mac-address
+
+ Some device trees have a mac-address property, some have local-mac-address,
+ and some have both. To support all of these device trees, ftp_cpu_setup()
+ should write the MAC address to mac-address and local-mac-address, if they
+ exist.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7dbdf28b8bd855a8530dc3292e4982575a197060
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Apr 20 14:11:38 2007 -0500
+
+ mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 14da5f7675bbb427c469e3f45006e027b6e21db9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 20 17:43:28 2007 +0200
+
+ Cleanup compiler warnings, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6923565db12af34fd5e02d354ee65a8c78ac460f
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Apr 20 12:01:47 2007 +0200
+
+ Fix breakage of NC650 board with respect to nand support.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 39f23cd90947639ac278a18ff277ec786b5ac167
+Author: Domen Puncer <domen.puncer@telargo.com>
+Date: Fri Apr 20 11:13:16 2007 +0200
+
+ [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
+
+ G2 core reference manual says decrementer and time base
+ are decreasing/increasing once every 4 bus clock cycles.
+ Lets fix it, so time in Linux won't run twice as fast
+
+ Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Thu Apr 19 23:14:39 2007 -0400
+
+ Fix serious pointer bug with bootm and reserve map.
+
+ What was suppose to be a stack variable was declared as a pointer,
+ overwriting random memory.
+ Also moved the libfdt.a requirement into the main Makefile. That is
+ The U-Boot Way.
+
+commit d21686263574e95cb3e9e9b0496f968b1b897fdb
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Apr 19 09:53:52 2007 +0200
+
+ ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
+
+ Previous versions used full wait states for the chip select #1 which
+ is connected to the Xilinix SystemACE controller on the AMCC Katmai
+ evaluation board. This leads to really slow access and therefore low
+ performance. This patch now sets up the chip select a lot faster
+ resulting in much better read/write performance of the Linux driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 37837828d89084879bee2f2b8c7c68d4695940df
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 17:49:29 2007 +0200
+
+ Clenaup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 17:20:58 2007 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 17:07:26 2007 +0200
+
+ Cleanup, update CHANGELOG
+
+ Sigend-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5f6c732affea9647762d27a4617a2ae64c52dceb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 16:17:46 2007 +0200
+
+ Update CHANGELOG
+
+commit ad4eb555671d97f96dc56eab55103b1f86874b01
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 14:30:39 2007 +0200
+
+ MCC200 board: remove warning which is obsolete after PSoC firmware changes
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3747a3f010b2b1442dec3e871c69788b6017aaae
+Author: Domen Puncer <domen.puncer@telargo.com>
+Date: Wed Apr 18 12:11:05 2007 +0200
+
+ [PATCH] icecube/lite5200b: document wakeup from low-power support
+
+ Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
+
+commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 18 12:07:47 2007 +0200
+
+ ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 18 12:05:59 2007 +0200
+
+ ppc4xx: Add output for bootrom location to 405EZ ports
+
+ Now 405EZ ports also show upon bootup from which boot device
+ they are configured to boot:
+
+ U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
+
+ CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
+ Bootstrap Option E - Boot ROM Location EBC (32 bits)
+ 16 kB I-Cache 16 kB D-Cache
+ Board: Acadia - AMCC PPC405EZ Evaluation Board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Apr 17 13:30:33 2007 +0100
+
+ Move ppearse to ARM board list
+ Add Konstantin Kletschke for scb9328.
+ Signed-off-by: Peter Pearse <peter.pearse@arm.com>
+
+commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
+Author: Domen Puncer <domen.puncer@telargo.com>
+Date: Mon Apr 16 14:00:13 2007 +0200
+
+ [PATCH] icecube/lite5200b: wakeup from low-power support
+
+ U-Boot part of Lite5200b low power mode support.
+ Puts SDRAM out of self-refresh and transfers control to
+ address saved at physical 0x0.
+
+ Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sun Apr 15 13:54:26 2007 -0400
+
+ Fix the ft_cpu_setup() property settings.
+
+ Use "setter" functions instead of flags, cleaner and more flexible.
+ It also fixes the problem noted by Timur Tabi that the ethernet MAC
+ addresses were all being set incorrectly to the same MAC address.
+
+commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Apr 14 22:51:24 2007 -0400
+
+ Improve the bootm command for CONFIG_OF_LIBFDT
+
+ In bootm, create the "/chosen" node only if it doesn't already exist
+ (better matches the previous behavior).
+ Update for proper reserved memory map handling for initrd.
+
+commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Apr 14 22:46:41 2007 -0400
+
+ Add some utilities to manipulate the reserved memory map.
+
+commit 8048cdd56f04a756eeea4951f402bf5cc33785db
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 14 21:16:54 2007 +0200
+
+ Update CHANGELOG
+
+commit 8e6875183cdca91c134408d119d4abcd48ef6856
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 18:56:46 2006 +0100
+
+ AVR32: Enable MMC support
+
+ Set up the portmux for the MMC interface and enable the MMC driver
+ along with support for DOS partitions, ext2 and FAT filesystems.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit fc26c97bb6df41b4a95662c34054fe912387bf38
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jan 20 10:03:53 2006 +0100
+
+ Atmel MCI driver
+
+ Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
+
+ The AT91 ARM-based CPUs use basically the same hardware, so it should
+ be possible to share this driver, but no effort has been made so far.
+
+ Hardware documentation can be found in the AT32AP7000 data sheet,
+ which can be downloaded from
+
+ http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 18:55:37 2006 +0100
+
+ AVR32: Add clk and gpio infrastructure for mmci
+
+ Implement functions for configuring the mmci pins, as well as
+ functions for getting the clock rate of the mmci controller.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 7fac3f69e9f05c5e5326681976c35d129324c4de
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 18:53:56 2006 +0100
+
+ Enable partition support with MMC
+
+ Include implementations of init_part() and get_partition_info() when
+ CONFIG_MMC is set.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 17:14:30 2006 +0100
+
+ AVR32: Enable networking
+
+ Implement MACB initialization for AVR32 and ATSTK1000, and turn
+ everything on, including the MACB driver.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jan 20 10:03:34 2006 +0100
+
+ Atmel MACB ethernet driver
+
+ Driver for the Atmel MACB on-chip ethernet controller.
+
+ This driver has been tested on the ATSTK1000 board with a AT32AP7000
+ CPU. It should probably work on AT91SAM926x as well with some minor
+ modifications.
+
+ Hardware documentation can be found in the AT32AP7000 data sheet,
+ which can be downloaded from
+
+ http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 16:56:14 2006 +0100
+
+ AVR32: Add clk and gpio infrastructure for macb0 and macb1
+
+ Implement functions for configuring the macb0 and macb1 pins, as
+ well as functions for getting the clock rate of the various
+ busses the macb ethernet controllers are connected to.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit d5acb95b16a0a74c643524342c3437e765426d05
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 15:39:15 2006 +0100
+
+ AVR32: Implement simple DMA memory allocator
+
+ Implement dma_alloc_coherent() which returns cache-aligned
+ uncacheable memory.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 91975b0fea773c9e681fea8cf3349669f27685ee
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 15:46:02 2006 +0100
+
+ Import <linux/mii.h> from the Linux kernel
+
+ Instead of creating yet another set of MII register definitions
+ in the macb driver, here's a complete set of definitions for everyone
+ to use.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 1b804b229556a4d862da93c0ec94e79419364b2c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Mar 21 19:47:36 2007 +0100
+
+ AVR32: Include more commands for ATSTK1000
+
+ Include the imi, imls and jffs commands sets by default on ATSTK1000.
+ Also define CONFIG_BOOTARGS to something more useful, define
+ CONFIG_BOOTCOMMAND and enable autoboot by default.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Mar 21 19:44:48 2007 +0100
+
+ AVR32: Provide a definition of struct stat
+
+ Copy the definition of struct stat from the Linux kernel.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 12f099c08167a7a51aeee623bc16dafd0841271c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 14:46:06 2006 +0100
+
+ AVR32: Use initdram() instead of board_init_memories()
+
+ Conform to the "standard" interface and use initdram() instead of
+ board_init_memories() on AVR32. This enables us to get rid of the
+ sdram_size member of the global_data struct as well.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Nov 20 15:53:10 2006 +0100
+
+ AVR32: Relocate u-boot to SDRAM
+
+ Relocate the u-boot image into SDRAM like everyone else does. This
+ means that we can handle much larger .data and .bss than we used to.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit df548d3c3e2bbc40258713167859ffc2ce99a900
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Nov 19 18:06:53 2006 +0100
+
+ AVR32: Resource management rewrite
+
+ Rewrite the resource management code (i.e. I/O memory, clock gating,
+ gpio) so it doesn't depend on any global state. This is necessary
+ because this code is heavily used before relocation to RAM, so we
+ can't write to any global variables.
+
+ As an added bonus, this makes u-boot's memory footprint a bit smaller,
+ although some functionality has been left out; all clocks are enabled
+ all the time, and there's no checking for gpio line conflicts.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 18 18:01:13 2006 +0100
+
+ AVR32: Clean up memory-map.h for at32ap7000
+
+ Convert spaces to tabs (must have missed this one last time around),
+ sort the entries by address and group them together by bus
+ connectivity.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 28c699ef69f4b6cdf252e4747b7b590028a88981
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 18 17:32:31 2006 +0100
+
+ AVR32: Build position-independent u-boot
+
+ Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
+ position independent. This will make relocation a lot easier.
+
+ -mno-init-got means that gcc shouldn't emit code to load the GOT
+ address into r6 in every function prologue. We do it once and for
+ all in the early startup assembly code, so enabling this option
+ makes u-boot a bit faster and smaller.
+
+ The assembly parts have always been position-independent, so no code
+ changes should be necessary.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 18 17:24:31 2006 +0100
+
+ AVR32: Use avr32-linux- cross-compilation prefix by default
+
+ It doesn't really matter which toolchain you use to compile u-boot,
+ but the avr32-linux one is probably what most people have installed.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 18 17:15:30 2006 +0100
+
+ AVR32: Split start_u_boot into board_init_f and board_init_r
+
+ Split the avr32 initialization code into a function to run before
+ relocation, board_init_f and a function to run after relocation,
+ board_init_r. For now, board_init_f simply calls board_init_r
+ at the end.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
Author: Heiko Schocher <hs@pollux.denx.de>
Date: Sat Apr 14 05:26:48 2007 +0200
@@ -7,6 +1225,54 @@
Signed-off-by: Heiko Schocher <hs@denx.de>
+commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
+Author: Denis Peter <d.peter@mpl.ch>
+Date: Fri Apr 13 09:13:33 2007 +0200
+
+ [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
+
+ Fix bug introduced by "Fix get_partition_info() parameter error in all
+ other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
+ to use diskboot or scsiboot form another device than 0.
+
+ Signed-off-by: Denis Peter <d.peter@mpl.ch>
+
+commit 0b94504d22e70f537c17a0d38c87edb6e370977d
+Author: Greg Lopp <lopp@pobox.com>
+Date: Fri Apr 13 08:02:24 2007 +0200
+
+ [PATCH] Fix use of "void *" for block dev read/write buffer pointers
+
+ Signed-of-by: Greg Lopp <lopp@pobox.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
+Author: Xie Xiaobo <r63061@freescale.com>
+Date: Fri Mar 9 19:08:25 2007 +0800
+
+ Fix two bugs for MPC83xx DDR2 controller SPD Init
+
+ There are a few bugs in the cpu/mpc83xx/spd_sdram.c
+ the first bug is that the picos_to_clk routine introduces a huge
+ rounding error in 83xx.
+ the second bug is that the mode register write recovery field is
+ tWR-1, not tWR >> 1.
+
+commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Thu Apr 12 14:15:59 2007 +0200
+
+ ppc4xx: Fix i2c divisor calcularion for PPC4xx
+
+ This patch fixes changes the i2c_init(...) function to use the function
+ get_OPB_freq() rather than calculating the OPB speed by
+ sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
+ specific per processor. The prior method was not and so was calculating
+ the wrong speed for some PPC4xx processors.
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
Author: Wolfgang Denk <wd@denx.de>
Date: Wed Apr 11 17:25:01 2007 +0200
@@ -25,6 +1291,106 @@
* Use Newline as "password" string
* Use just a single partition in NAND flash
+commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Mon Jan 22 12:37:30 2007 -0600
+
+ Add PIXIS FPGA support for MPC8641HPCN board.
+
+ Move the 8641HPCN's PIXIS code to the new directory
+ board/freescale/common/ as it will be shared by
+ future boards not in the same processor family.
+
+ Write a "pixis_reset" command that utilizes the FPGA
+ reset sequencer to support alternate soft-reset options
+ such as using the "alternate" flash bank, enabling
+ the watch dog, or choosing different CPU frequencies.
+
+ Add documentation for the pixis_reset to README.mpc8641hpcn.
+
+ Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Apr 6 14:19:43 2007 -0400
+
+ Moved fdt command support code to fdt_support.c
+
+ ...in preparation for improving the bootm command's handling of fdt blobs.
+ Also cleaned up some coding sloppiness.
+
+commit 6679f9299534e488a171a9bb8f9bb891de247aab
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Apr 6 14:17:14 2007 -0400
+
+ libfdt: Make fdt_check_header() public
+
+ Changed _fdt_check_header() to fdt_check_header() and made it part of
+ the interface - it is a useful routine.
+
+ Also did some asthetics cleanup to the include files (headers).
+
+commit c0707ce65677650b5ceab0500ee50ae5168afef2
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:34:06 2007 +0800
+
+ [Blackfin][PATCH] Kill off a bunch of common local prototypes
+
+commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:33:04 2007 +0800
+
+ [Blackfin][PATCH] Fix dynamic CPLB generation issue
+
+commit 0445e3a264251d75b1be45ef713c70726a2952f0
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:31:47 2007 +0800
+
+ [Blackfin][PATCH] minior cleanup
+
+commit 155fd766573981090e638b493d5857562151862e
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:31:18 2007 +0800
+
+ [Blackfin][PATCH] Fix copyright and update license
+
+commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:30:25 2007 +0800
+
+ [Blackfin][PATCH] Add BF537 EMAC driver initialization
+
+commit 889256e8604e0c68db1d866d720894dffede9df6
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:29:55 2007 +0800
+
+ [Blackfin][PATCH] call real the system synchronize instruction
+
+commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:29:17 2007 +0800
+
+ [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
+
+commit dfeeab2cd680df047e68e723b246adf6f33bb556
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:28:34 2007 +0800
+
+ [Blackfin][PATCH]: fix flash unaligned copy issue
+
+commit 443feb740584e406efa203af909fe2926608e8d5
+Author: Igor Marnat <marny@rambler.ru>
+Date: Wed Mar 21 09:55:01 2007 +0300
+
+ Update usage of 'nc' in README.NetConsole
+
+ Added information about usage of NetConsole on systems where the -l and -p
+ switches are mutually exclusive.
+
+ Signed-off-by: Igor Marnat <marny@rambler.ru>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
commit 31c98a88228021b314c89ebb8104fb6473da4471
Author: Wolfgang Denk <wd@denx.de>
Date: Wed Apr 4 02:09:30 2007 +0200
@@ -37,6 +1403,18 @@
Minor cleanup.
+commit a65c5768e5537530bd1780af3d3fddc3113a163c
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Apr 2 10:09:30 2007 +0200
+
+ ppc4xx: Change SysACE address on Katmai
+
+ With this new base address of the Xilinx SystemACE controller
+ the Linux driver will be easier to adapt, since it can now be
+ mapped via the "normal" ioremap() call.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
Author: Gerald Van Baren <vanbaren@cideas.com>
Date: Sat Mar 31 14:30:53 2007 -0400
@@ -604,6 +1982,24 @@
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 83853178bd36bca6f0f8f1331476620c84a587fc
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Mar 7 12:14:50 2007 -0600
+
+ net - Support ping reply when processing net-loop
+
+ Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
+
+ This permits the ping command to test the phy interface when the phy
+ is put in loopback mode (typically by setting register 0 bit 14).
+
+ It also allows the port to respond to an external ping when u-boot is
+ processing some other net command (such as tftp). This is useful when
+ tftp appears to hang.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
commit fa1aef15bcd47736687be1af544506e90fba545d
Author: Stefan Roese <sr@denx.de>
Date: Wed Mar 7 16:43:00 2007 +0100
@@ -680,6 +2076,12 @@
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Mar 4 01:36:05 2007 +0100
+
+ Some code cleanup.
+
commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
Author: Kim Phillips <kim.phillips@freescale.com>
Date: Wed Feb 28 00:02:04 2007 -0600
@@ -1551,6 +2953,15 @@
[ColdFire MCF5271 family] Add CPU detection based on the value of Chip
Identification Register (CIR).
+commit fdef388758506765d4d6a7155c8f1584c63ff581
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Jan 22 13:19:21 2007 +0800
+
+ use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
+ The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
+ fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
+ mpc7448hpc2 board.
+
commit a4012396645533aef218354eeba754dff0deace8
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Fri Jan 19 23:08:39 2007 +0100
@@ -1966,6 +3377,72 @@
automatic update mechanism
+commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Dec 4 17:56:59 2006 +0800
+
+ Slight code clean up.
+ Add comments, delete duplicate define and remove spaces.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Dec 4 17:54:21 2006 +0800
+
+ Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
+ multiplier table can not refect the real PLL clock behavior of these
+ processors. Please refer to the hardware specification for detailed
+ information of the corresponding processors.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Dec 4 14:46:23 2006 +0800
+
+ Remove the static MAC address, ip address, server ip, netmask and
+ gateway ip for network setting.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Dec 4 14:33:08 2006 +0800
+
+ Remove the duplicate memory test code for mpc744ihpc2 board.
+ If a memory test is needed, please use the functions in
+ post/memory.c or memtest command.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Fri Dec 1 19:01:25 2006 +0800
+
+ Fix the exception occuring in RAM table search issue.
+ The original search_one_table() function code can only processes the search
+ for the exception occurring in FLASH/ROM, because the exception and fixup
+ table usually locate in FLASH. If the exception address is also in
+ FLASH, it will be OK.
+ If the exception occurs in RAM, after the u-boot relocation, a
+ relocation offset should be added.
+
+ clean up the code in cpu/74xx_7xx/cpu.c
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit ee311214e0d216f904feea269599d0934bf71f23
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Fri Dec 1 11:47:36 2006 +0800
+
+ Clean up the code according to codestyle:
+ (1) remove some C++ comments.
+ (2) remove trailing white space.
+ (3) remove trailing empty line.
+ (4) Indentation by table.
+ (5) remove {} in one line condition.
+ (6) add space before '(' in function call.
+ Remove some weird printf () output.
+ Add necessary comments.
+ Modified Makefile to support building in a separate directory.
+
commit dd520bf314c7add4183c5191692180f576f96b60
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Thu Nov 30 18:02:20 2006 +0100
@@ -2672,12 +4149,191 @@
Signed-off-by: Nick Spence <nick.spence@freescale.com>
+commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Fri Nov 3 13:10:00 2006 +0800
+
+ Remove some unused CFG define.
+ undef CFG_DRAM_TEST
+
+commit 99c09c4dec34f77c243bf51bea532e3f339410ad
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Fri Nov 3 13:07:36 2006 +0800
+
+ Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
+ Both work. 0xFF000000 seems more reasonable.
+
commit c59200443072353044aa4bf737a5a60f9a9af231
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Thu Nov 2 15:15:01 2006 +0100
Release U-Boot 1.1.6
+commit c1fbe4103a0d6c8957f912af902d705ba67836f2
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:14:48 2006 +0800
+
+ This patch comes from Yuli's posted patch on 8/8/2006
+ titled "CFI Driver Little-Endian write Issue".
+
+ http://sourceforge.net/mailarchive/message.php?msg_id=36311999
+
+ If that patch applied, please discard this one.
+ Until now , I do not see his patch is applied. So please apply this one.
+
+ Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit b825f158e449e1e9cf74c08e572955e122394c96
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:12:31 2006 +0800
+
+ Tsi108 on chip i2c support.
+
+ The i2c Interface provides a master-only, serial interface that can be
+ used for initializing Tsi108/Tsi109 registers from an EEPROM after a
+ device reset.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:11:06 2006 +0800
+
+ Tsi108 on chip pci controller support.
+
+ If there is no pci card, the tsi108/109 pci configure read will
+ cause a machine check exception to the processor. PCI error should
+ also be cleared after the read.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit d1927cee977126e547ceeba23e4f978f377cfb8f
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:08:55 2006 +0800
+
+ Tundra tsi108 on chip Ethernet controller support.
+
+ The following is a brief description of the Ethernet controller:
+ The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
+ Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
+ to manage the two physical connection devices (PHYs). Each Ethernet port
+ has its own statistics monitor that tracks and reports key interface
+ statistics. Each port supports a 256-entry hash table for address
+ filtering. In addition, each port is bridged to the Switch Fabric
+ through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
+
+ Each Ethernet port also has a pair of internal Ethernet DMA channels to
+ support the transmit and receive data flows. The Ethernet DMA channels
+ use descriptors set up in memory, the memory map of the device, and
+ access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
+ handles arbitration for the Switch Fabric. The Controller also
+ has a register businterface for register accesses and status monitor
+ control.
+
+ The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
+ modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
+ The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
+ data flows to and from the Ethernet Controller through the Switch Fabric.
+
+ Each Ethernet port uses its transmit and receive DMA channels to manage
+ data flows through buffer descriptors that are predefined by the
+ system (the descriptors can exist anywhere in the system memory map).
+ These descriptors are data structures that point to buffers filled
+ with data ready to transmit over Ethernet, or they point to empty
+ buffers ready to receive data from Ethernet.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:01:33 2006 +0800
+
+ Tundra tsi108 header file.
+
+ The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
+ PowerPC processors that offers numerous system interconnect options for
+ embedded application designers. The Tsi108 can interconnect 60x or
+ MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
+ and Flash. Provided the macro define for tsi108 chip.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 87c4db09699c6b89176b31004afcb83eb1585d47
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:59:15 2006 +0800
+
+ Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
+ mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 27801b8ab11c61b577e45742a515bb3b23b80241
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:57:21 2006 +0800
+
+ Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
+ Make ,config.mk and link file for the mpc7448hpc2 board.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:55:04 2006 +0800
+
+ Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
+ The mpc7448hpc2 board support header file.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 625bb5ddb50b243f931262ca8c46956409471917
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:52:21 2006 +0800
+
+ Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
+ The mpc7448hpc2 board support low level assemble language init code.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 4c52783b3d024e153c4972b97332e314bc3bdc46
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:49:51 2006 +0800
+
+ General code modification for mpc7448hpc2 board support.
+ 1. Add 7447A and 7448 processor support.
+ 2. Add the following flags.
+
+ CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
+ (such as by switch on board), this flag should be set.
+
+ CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
+ relocates to RAM, this flag should be set.
+
+ CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
+ system hang in exception, this flag should be set.
+
+ There is a design issue for tsi108/109 pci configure read. When pci scan
+ the slots, if there is no pci card, the tsi108/9 will cause a machine
+ check exception for mpc7448 processor.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:34:47 2006 +0800
+
+ Add README file for mpc7448hpc2 board.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Wed Nov 1 02:04:38 2006 +0100
diff --git a/MAINTAINERS b/MAINTAINERS
index 2a43848..2eaef17 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -221,10 +221,11 @@
MPC8641HPCN MPC8641D
-Dan Malek <dan@embeddededge.com>
+Dan Malek <dan@embeddedalley.com>
- STxGP3 MPC85xx
- STxXTc MPC8xx
+ stxgp3 MPC85xx
+ stxssa MPC85xx
+ stxxtc MPC8xx
Eran Man <eran@nbase.co.il>
@@ -257,15 +258,6 @@
ep8260 MPC8260
-Peter Pearse <peter.pearse@arm.com>
- integratorcp All current ARM supplied &
- supported core modules
- - see http://www.arm.com
- /products/DevTools
- /Hardware_Platforms.html
- versatile ARM926EJ-S
- versatile ARM926EJ-S
-
Denis Peter <d.peter@mpl.ch>
MIP405 PPC4xx
@@ -444,6 +436,9 @@
smdk2400 ARM920T
trab ARM920T
+Konstantin Kletschke <kletschke@synertronixx.de>
+ scb9328 ARM920T
+
Nishant Kamat <nskamat@ti.com>
omap1610h2 ARM926EJS
@@ -461,6 +456,15 @@
shannon SA1100
+Peter Pearse <peter.pearse@arm.com>
+ integratorcp All current ARM supplied &
+ supported core modules
+ -see http://www.arm.com
+ /products/DevTools
+ /Hardware_Platforms.html
+ versatile ARM926EJ-S
+ versatile ARM926EJ-S
+
Dave Peverley <dpeverley@mpc-data.co.uk>
omap730p2 ARM926EJS
diff --git a/MAKEALL b/MAKEALL
index 23402a2..81f5dfc 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -132,8 +132,8 @@
#########################################################################
LIST_83xx=" \
- MPC832XEMDS MPC8349EMDS MPC8349ITX MPC8349ITXGP \
- MPC8360EMDS sbc8349 TQM834x \
+ MPC8313ERDB MPC832XEMDS MPC8349EMDS MPC8349ITX \
+ MPC8349ITXGP MPC8360EMDS sbc8349 TQM834x \
"
@@ -142,10 +142,11 @@
#########################################################################
LIST_85xx=" \
- MPC8540ADS MPC8540EVAL MPC8541CDS MPC8548CDS \
- MPC8555CDS MPC8560ADS PM854 PM856 \
- sbc8540 sbc8560 stxgp3 TQM8540 \
- TQM8541 TQM8555 TQM8560 \
+ MPC8540ADS MPC8540EVAL MPC8541CDS MPC8544DS \
+ MPC8548CDS MPC8555CDS MPC8560ADS PM854 \
+ PM856 sbc8540 sbc8560 stxgp3 \
+ stxssa TQM8540 TQM8541 TQM8555 \
+ TQM8560 \
"
#########################################################################
@@ -155,6 +156,7 @@
LIST_74xx=" \
DB64360 DB64460 EVB64260 P3G4 \
p3m7448 PCIPPC2 PCIPPC6 ZUMA \
+ mpc7448hpc2
"
LIST_7xx=" \
diff --git a/Makefile b/Makefile
index 99f38af..463757c 100644
--- a/Makefile
+++ b/Makefile
@@ -149,7 +149,7 @@
CROSS_COMPILE = bfin-uclinux-
endif
ifeq ($(ARCH),avr32)
-CROSS_COMPILE = avr32-
+CROSS_COMPILE = avr32-linux-
endif
endif
endif
@@ -197,6 +197,9 @@
ifdef SOC
LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
endif
+ifeq ($(CPU),ixp)
+LIBS += cpu/ixp/npe/libnpe.a
+endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
@@ -219,7 +222,7 @@
LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \
"post/board/$(BOARDDIR)/libpost$(BOARD).a"; fi)
LIBS += common/libcommon.a
-LIBS += $(BOARDLIBS)
+LIBS += libfdt/libfdt.a
LIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS)
@@ -1040,8 +1043,7 @@
@mkdir -p $(obj)nand_spl
@mkdir -p $(obj)board/amcc/bamboo
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @echo "Compile NAND boot image for bamboo"
- @$(MKCONFIG) -a bamboo ppc ppc4xx bamboo amcc
+ @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@@ -1633,6 +1635,19 @@
## MPC83xx Systems
#########################################################################
+MPC8313ERDB_33_config \
+MPC8313ERDB_66_config: unconfig
+ @echo "" >include/config.h ; \
+ if [ "$(findstring _33_,$@)" ] ; then \
+ echo -n "...33M ..." ; \
+ echo "#define CFG_33MHZ" >>include/config.h ; \
+ fi ; \
+ if [ "$(findstring _66_,$@)" ] ; then \
+ echo -n "...66M..." ; \
+ echo "#define CFG_66MHZ" >>include/config.h ; \
+ fi ;
+ @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb
+
MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_HOST_66_config \
@@ -1739,12 +1754,18 @@
MPC8541CDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8541cds cds
+MPC8544DS_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
+
MPC8548CDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8548cds cds
MPC8555CDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8555cds cds
+MPC8568MDS_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds
+
PM854_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
@@ -1780,6 +1801,9 @@
stxgp3_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
+stxssa_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxssa
+
TQM8540_config \
TQM8541_config \
TQM8555_config \
@@ -1829,6 +1853,9 @@
EVB64260_750CX_config: unconfig
@$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
+mpc7448hpc2_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2
+
P3G4_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
diff --git a/README b/README
index 87d6d10..bb5b46e 100644
--- a/README
+++ b/README
@@ -718,6 +718,7 @@
CFG_CMD_VFD * VFD support (TRAB)
CFG_CMD_BSP * Board SPecific functions
CFG_CMD_CDP * Cisco Discover Protocol support
+ CFG_CMD_FSL * Microblaze FSL support
-----------------------------------------------
CFG_CMD_ALL all
@@ -2398,17 +2399,17 @@
csb272_config lwmon_config sbc8260_config
CU824_config MBX860T_config sbc8560_33_config
DUET_ADS_config MBX_config sbc8560_66_config
- EBONY_config MPC8260ADS_config SM850_config
- ELPT860_config MPC8540ADS_config SPD823TS_config
- ESTEEM192E_config MPC8540EVAL_config stxgp3_config
- ETX094_config MPC8560ADS_config SXNI855T_config
- FADS823_config NETVIA_config TQM823L_config
- FADS850SAR_config omap1510inn_config TQM850L_config
- FADS860T_config omap1610h2_config TQM855L_config
- FPS850L_config omap1610inn_config TQM860L_config
- omap5912osk_config walnut_config
- omap2420h4_config Yukon8220_config
- ZPC1900_config
+ EBONY_config mpc7448hpc2_config SM850_config
+ ELPT860_config MPC8260ADS_config SPD823TS_config
+ ESTEEM192E_config MPC8540ADS_config stxgp3_config
+ ETX094_config MPC8540EVAL_config SXNI855T_config
+ FADS823_config NMPC8560ADS_config TQM823L_config
+ FADS850SAR_config NETVIA_config TQM850L_config
+ FADS860T_config omap1510inn_config TQM855L_config
+ FPS850L_config omap1610h2_config TQM860L_config
+ omap1610inn_config walnut_config
+ omap5912osk_config Yukon8220_config
+ omap2420h4_config ZPC1900_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
diff --git a/avr32_config.mk b/avr32_config.mk
index 0b92053..441caa4 100644
--- a/avr32_config.mk
+++ b/avr32_config.mk
@@ -21,5 +21,5 @@
# MA 02111-1307 USA
#
-PLATFORM_RELFLAGS += -ffixed-r5 -mno-pic -mrelax
+PLATFORM_RELFLAGS += -ffixed-r5 -fPIC -mno-init-got -mrelax
PLATFORM_LDFLAGS += --relax
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
index baf598c..3b63c8a 100644
--- a/board/amcc/acadia/acadia.c
+++ b/board/amcc/acadia/acadia.c
@@ -62,6 +62,10 @@
acadia_gpio_init();
+ /* Configure 405EZ for NAND usage */
+ mtsdr(sdrnand0, 0x80c00000);
+ mtsdr(sdrultra0, 0x8d110000);
+
/* USB Host core needs this bit set */
mfsdr(sdrultra1, reg);
mtsdr(sdrultra1, reg | SDR_ULTRA1_LEDNENABLE);
@@ -91,8 +95,11 @@
int checkboard(void)
{
char *s = getenv("serial#");
+ u8 rev;
- printf("Board: Acadia - AMCC PPC405EZ Evaluation Board");
+ rev = in8(CFG_CPLD_BASE + 0);
+ printf("Board: Acadia - AMCC PPC405EZ Evaluation Board, Rev. %X", rev);
+
if (s != NULL) {
puts(", serial# ");
puts(s);
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
index 826d192..78e2cb4 100644
--- a/board/amcc/sequoia/sdram.c
+++ b/board/amcc/sequoia/sdram.c
@@ -371,6 +371,14 @@
}
#endif /* CONFIG_DDR_DATA_EYE */
+#if defined(CONFIG_NAND_SPL)
+/* Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
+ * for the 4k NAND boot image so define bus_frequency to 133MHz here
+ * which is save for the refresh counter setup.
+ */
+#define get_bus_freq(val) 133000000
+#endif
+
/*************************************************************************
*
* initdram -- 440EPx's DDR controller is a DENALI Core
@@ -408,7 +416,7 @@
mtsdram(DDR0_22, 0x00267F0B);
mtsdram(DDR0_23, 0x00000000);
mtsdram(DDR0_24, 0x01010002);
- if (speed > 133333333)
+ if (speed > 133333334)
mtsdram(DDR0_26, 0x5B26050C);
else
mtsdram(DDR0_26, 0x5B260408);
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index 930fa71..ba365ae 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -363,8 +363,8 @@
printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
#endif
- rev = *(u8 *)(CFG_BCSR_BASE + 0);
- val = *(u8 *)(CFG_BCSR_BASE + 5) & 0x01;
+ rev = in8(CFG_BCSR_BASE + 0);
+ val = in8(CFG_BCSR_BASE + 5) & 0x01;
printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
if (s != NULL) {
diff --git a/board/atmel/atstk1000/Makefile b/board/atmel/atstk1000/Makefile
index 155d46a..8a15713 100644
--- a/board/atmel/atstk1000/Makefile
+++ b/board/atmel/atstk1000/Makefile
@@ -26,7 +26,7 @@
LIB := $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o eth.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 4d737d2..6618963 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -23,6 +23,8 @@
#include <asm/io.h>
#include <asm/sdram.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hmatrix2.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -40,9 +42,27 @@
.txsr = 5,
};
-void board_init_memories(void)
+int board_early_init_f(void)
{
- gd->sdram_size = sdram_init(&sdram);
+ /* Set the SDRAM_ENABLE bit in the HEBI SFR */
+ hmatrix2_writel(SFR4, 1 << 1);
+
+ gpio_enable_ebi();
+ gpio_enable_usart1();
+#if defined(CONFIG_MACB)
+ gpio_enable_macb0();
+ gpio_enable_macb1();
+#endif
+#if defined(CONFIG_MMC)
+ gpio_enable_mmci();
+#endif
+
+ return 0;
+}
+
+long int initdram(int board_type)
+{
+ return sdram_init(&sdram);
}
void board_init_info(void)
diff --git a/cpu/at32ap/at32ap7000/hebi.c b/board/atmel/atstk1000/eth.c
similarity index 66%
rename from cpu/at32ap/at32ap7000/hebi.c
rename to board/atmel/atstk1000/eth.c
index 3b32adf..3a7916e 100644
--- a/cpu/at32ap/at32ap7000/hebi.c
+++ b/board/atmel/atstk1000/eth.c
@@ -1,5 +1,7 @@
/*
- * Copyright (C) 2006 Atmel Corporation
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * Ethernet initialization for the ATSTK1000 starterkit
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -21,18 +23,16 @@
*/
#include <common.h>
-#include <asm/io.h>
-
-#include <asm/arch/hmatrix2.h>
#include <asm/arch/memory-map.h>
-#include <asm/arch/platform.h>
-void cpu_enable_sdram(void)
+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+
+#if defined(CONFIG_MACB) && (CONFIG_COMMANDS & CFG_CMD_NET)
+void atstk1000_eth_initialize(bd_t *bi)
{
- const struct device *hmatrix;
+ int id = 0;
- hmatrix = get_device(DEVICE_HMATRIX);
-
- /* Set the SDRAM_ENABLE bit in the HEBI SFR */
- hmatrix2_writel(hmatrix, SFR4, 1 << 1);
+ macb_eth_initialize(id++, (void *)MACB0_BASE, bi->bi_phy_id[0]);
+ macb_eth_initialize(id++, (void *)MACB1_BASE, bi->bi_phy_id[1]);
}
+#endif
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
index 3aebf66..958f4dc 100644
--- a/board/atmel/atstk1000/flash.c
+++ b/board/atmel/atstk1000/flash.c
@@ -57,7 +57,7 @@
gd->bd->bi_flashstart = CFG_FLASH_BASE;
gd->bd->bi_flashsize = CFG_FLASH_SIZE;
- gd->bd->bi_flashoffset = __edata_lma - _text;
+ gd->bd->bi_flashoffset = _edata - _text;
flash_info[0].size = CFG_FLASH_SIZE;
flash_info[0].sector_count = 135;
diff --git a/board/atmel/atstk1000/u-boot.lds b/board/atmel/atstk1000/u-boot.lds
index ef89ea4..34e347a 100644
--- a/board/atmel/atstk1000/u-boot.lds
+++ b/board/atmel/atstk1000/u-boot.lds
@@ -40,35 +40,38 @@
}
. = ALIGN(32);
__flashprog_end = .;
+ _etext = .;
- . = ALIGN(8);
.rodata : {
*(.rodata)
*(.rodata.*)
}
- _etext = .;
- __data_lma = ALIGN(8);
- . = 0x24000000;
+ . = ALIGN(8);
_data = .;
- .data : AT(__data_lma) {
+ .data : {
*(.data)
*(.data.*)
}
. = ALIGN(4);
__u_boot_cmd_start = .;
- __u_boot_cmd_lma = __data_lma + (__u_boot_cmd_start - _data);
- .u_boot_cmd : AT(__u_boot_cmd_lma) {
+ .u_boot_cmd : {
KEEP(*(.u_boot_cmd))
}
__u_boot_cmd_end = .;
+ . = ALIGN(4);
+ _got = .;
+ .got : {
+ *(.got)
+ }
+ _egot = .;
+
. = ALIGN(8);
_edata = .;
- __edata_lma = __u_boot_cmd_lma + (_edata - __u_boot_cmd_start);
- .bss : AT(__edata_lma) {
+ .bss : {
*(.bss)
*(.bss.*)
}
diff --git a/board/bf533-ezkit/Makefile b/board/bf533-ezkit/Makefile
index 4fe7d78..e55c1a7 100644
--- a/board/bf533-ezkit/Makefile
+++ b/board/bf533-ezkit/Makefile
@@ -1,7 +1,7 @@
#
# U-boot - Makefile
#
-# Copyright (c) 2007 Analog Device Inc.
+# Copyright (c) 2005-2007 Analog Device Inc.
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c
index feaeb00..1dd4a3f 100644
--- a/board/bf533-ezkit/bf533-ezkit.c
+++ b/board/bf533-ezkit/bf533-ezkit.c
@@ -1,7 +1,7 @@
/*
* U-boot - ezkit533.c
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/board/bf533-ezkit/flash-defines.h b/board/bf533-ezkit/flash-defines.h
index e211918..bd9e859 100644
--- a/board/bf533-ezkit/flash-defines.h
+++ b/board/bf533-ezkit/flash-defines.h
@@ -1,7 +1,7 @@
/*
* U-boot - flash-defines.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef __FLASHDEFINES_H__
@@ -60,7 +60,7 @@
int erase_flash(void);
int erase_block_flash(int, unsigned long);
void unlock_flash(long lOffset);
-int write_data(long lStart, long lCount, long lStride, int *pnData);
+int write_data(long lStart, long lCount, uchar *pnData);
int FillData(long lStart, long lCount, long lStride, int *pnData);
int read_data(long lStart, long lCount, long lStride, int *pnData);
int read_flash(long nOffset, int *pnValue);
diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c
index 067a260..299cdba 100644
--- a/board/bf533-ezkit/flash.c
+++ b/board/bf533-ezkit/flash.c
@@ -1,7 +1,7 @@
/*
* U-boot - flash.c Flash driver for PSD4256GV
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
* This file is based on BF533EzFlash.c originally written by Analog Devices, Inc.
*
* (C) Copyright 2000-2004
@@ -22,8 +22,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <asm/io.h>
@@ -178,63 +178,66 @@
int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
int ret;
-
- ret = write_data(addr, cnt, 1, (int *)src);
+ int d;
+ if (addr % 2) {
+ read_flash(addr - 1 - CFG_FLASH_BASE, &d);
+ d = (int)((d & 0x00FF) | (*src++ << 8));
+ ret = write_data(addr - 1, 2, (uchar *) & d);
+ if (ret == FLASH_FAIL)
+ return ERR_NOT_ERASED;
+ ret = write_data(addr + 1, cnt - 1, src);
+ } else
+ ret = write_data(addr, cnt, src);
if (ret == FLASH_FAIL)
return ERR_NOT_ERASED;
return FLASH_SUCCESS;
}
-int write_data(long lStart, long lCount, long lStride, int *pnData)
+int write_data(long lStart, long lCount, uchar * pnData)
{
long i = 0;
- int j = 0;
unsigned long ulOffset = lStart - CFG_FLASH_BASE;
int d;
- int iShift = 0;
- int iNumWords = 2;
- int nLeftover = lCount % 4;
int nSector = 0;
+ int flag = 0;
- for (i = 0; (i < lCount / 4) && (i < BUFFER_SIZE); i++) {
- for (iShift = 0, j = 0; (j < iNumWords);
- j++, ulOffset += (lStride * 2)) {
- if ((ulOffset >= INVALIDLOCNSTART)
- && (ulOffset < INVALIDLOCNEND)) {
- printf
- ("Invalid locations, Try writing to another location \n");
- return FLASH_FAIL;
- }
- get_sector_number(ulOffset, &nSector);
- read_flash(ulOffset, &d);
- if (d != 0xffff) {
- printf
- ("Flash not erased at offset 0x%x Please erase to reprogram \n",
- ulOffset);
- return FLASH_FAIL;
- }
- unlock_flash(ulOffset);
- if (write_flash(ulOffset, (pnData[i] >> iShift)) < 0) {
- printf("Error programming the flash \n");
- return FLASH_FAIL;
- }
- iShift += 16;
- }
+ if (lCount % 2) {
+ flag = 1;
+ lCount = lCount - 1;
}
- if (nLeftover > 0) {
- if ((ulOffset >= INVALIDLOCNSTART)
- && (ulOffset < INVALIDLOCNEND))
- return FLASH_FAIL;
+
+ for (i = 0; i < lCount - 1; i += 2, ulOffset += 2) {
get_sector_number(ulOffset, &nSector);
read_flash(ulOffset, &d);
if (d != 0xffff) {
printf
- ("Flash already programmed. Please erase to reprogram \n");
- printf("uloffset = 0x%x \t d = 0x%x\n", ulOffset, d);
+ ("Flash not erased at offset 0x%x Please erase to reprogram \n",
+ ulOffset);
return FLASH_FAIL;
}
unlock_flash(ulOffset);
- if (write_flash(ulOffset, pnData[i]) < 0) {
+ d = (int)(pnData[i] | pnData[i + 1] << 8);
+ write_flash(ulOffset, d);
+ if (poll_toggle_bit(ulOffset) < 0) {
+ printf("Error programming the flash \n");
+ return FLASH_FAIL;
+ }
+ if ((i > 0) && (!(i % AFP_SectorSize2)))
+ printf(".");
+ }
+ if (flag) {
+ get_sector_number(ulOffset, &nSector);
+ read_flash(ulOffset, &d);
+ if (d != 0xffff) {
+ printf
+ ("Flash not erased at offset 0x%x Please erase to reprogram \n",
+ ulOffset);
+ return FLASH_FAIL;
+ }
+ unlock_flash(ulOffset);
+ d = (int)(pnData[i] | (d & 0xFF00));
+ write_flash(ulOffset, d);
+ if (poll_toggle_bit(ulOffset) < 0) {
printf("Error programming the flash \n");
return FLASH_FAIL;
}
diff --git a/board/bf533-ezkit/psd4256.h b/board/bf533-ezkit/psd4256.h
index 9776516..cc654b8 100644
--- a/board/bf533-ezkit/psd4256.h
+++ b/board/bf533-ezkit/psd4256.h
@@ -1,7 +1,7 @@
/*
* U-boot - psd4256.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
/*
diff --git a/board/bf533-stamp/Makefile b/board/bf533-stamp/Makefile
index 8223d59..02c941b 100644
--- a/board/bf533-stamp/Makefile
+++ b/board/bf533-stamp/Makefile
@@ -1,7 +1,7 @@
#
# U-boot - Makefile
#
-# Copyright (c) 2007 Analog Device Inc.
+# Copyright (c) 2005-2007 Analog Device Inc.
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c
index 2f6e751..b9dff99 100644
--- a/board/bf533-stamp/bf533-stamp.c
+++ b/board/bf533-stamp/bf533-stamp.c
@@ -1,7 +1,7 @@
/*
* U-boot - stamp.c STAMP board specific routines
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/board/bf533-stamp/bf533-stamp.h b/board/bf533-stamp/bf533-stamp.h
index b2b51aa..1e58e47 100644
--- a/board/bf533-stamp/bf533-stamp.h
+++ b/board/bf533-stamp/bf533-stamp.h
@@ -1,7 +1,7 @@
/*
* U-boot - stamp.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef __STAMP_H__
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
index cc4e998..47f7c9e 100644
--- a/board/bf537-stamp/bf537-stamp.c
+++ b/board/bf537-stamp/bf537-stamp.c
@@ -1,7 +1,7 @@
/*
* U-boot - BF537.c
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/board/bf537-stamp/flash-defines.h b/board/bf537-stamp/flash-defines.h
index f19e171..acc1e86 100644
--- a/board/bf537-stamp/flash-defines.h
+++ b/board/bf537-stamp/flash-defines.h
@@ -1,7 +1,7 @@
/*
* U-boot - flash-defines.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef __FLASHDEFINES_H__
diff --git a/board/bf537-stamp/flash.c b/board/bf537-stamp/flash.c
index 42dcf06..ed85841 100644
--- a/board/bf537-stamp/flash.c
+++ b/board/bf537-stamp/flash.c
@@ -1,7 +1,7 @@
/*
* U-boot - flash.c Flash driver for PSD4256GV
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
* This file is based on BF533EzFlash.c originally written by Analog Devices, Inc.
*
* (C) Copyright 2000-2004
@@ -22,8 +22,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <malloc.h>
diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c
index 71281c0..989b019 100644
--- a/board/bf561-ezkit/bf561-ezkit.c
+++ b/board/bf561-ezkit/bf561-ezkit.c
@@ -2,7 +2,7 @@
* U-boot - ezkit561.c
*
* Copyright (c) 2005 Bas Vermeulen <bas@buyways.nl>
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -22,8 +22,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/board/cds/mpc8541cds/mpc8541cds.c b/board/cds/mpc8541cds/mpc8541cds.c
index a42904c..4192324 100644
--- a/board/cds/mpc8541cds/mpc8541cds.c
+++ b/board/cds/mpc8541cds/mpc8541cds.c
@@ -477,11 +477,14 @@
static struct pci_config_table pci_mpc85xxcds_config_table[] = {
{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
- {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
+ {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1,
+ mpc85xx_config_via_usbide, {0,0,0}},
{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
- {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
- {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
+ {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5,
+ mpc85xx_config_via_power, {0,0,0}},
+ {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}},
+ {},
};
static struct pci_controller hose[] = {
diff --git a/board/cds/mpc8541cds/u-boot.lds b/board/cds/mpc8541cds/u-boot.lds
index 1bea007..dc87a12 100644
--- a/board/cds/mpc8541cds/u-boot.lds
+++ b/board/cds/mpc8541cds/u-boot.lds
@@ -69,6 +69,7 @@
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
cpu/mpc85xx/cpu.o (.text)
+ drivers/tsec.o (.text)
cpu/mpc85xx/speed.o (.text)
cpu/mpc85xx/pci.o (.text)
common/dlmalloc.o (.text)
diff --git a/board/cds/mpc8548cds/init.S b/board/cds/mpc8548cds/init.S
index 978bda5..d468f5b 100644
--- a/board/cds/mpc8548cds/init.S
+++ b/board/cds/mpc8548cds/init.S
@@ -64,8 +64,9 @@
/*
* Number of TLB0 and TLB1 entries in the following table
*/
- .long 13
+ .long (2f-1f)/16
+1:
#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
/*
* TLB0 4K Non-cacheable, guarded
@@ -134,7 +135,7 @@
/*
* TLB 1: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
+ * 0x80000000 256M PCI1 MEM
*/
.long TLB1_MAS0(1, 1, 0)
.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
@@ -143,40 +144,37 @@
/*
* TLB 2: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
+ * 0x90000000 256M PCI2 MEM
*/
.long TLB1_MAS0(1, 2, 0)
.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE),
0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE),
0,0,0,0,0,1,0,1,0,1)
/*
- * TLB 3: 256M Non-cacheable, guarded
- * 0xa0000000 256M PCI2 MEM First half
+ * TLB 3: 1GB Non-cacheable, guarded
+ * 0xa0000000 256M PEX MEM First half
+ * 0xb0000000 256M PEX MEM Second half
+ * 0xc0000000 256M Rapid IO MEM First half
+ * 0xd0000000 256M Rapid IO MEM Second half
*/
.long TLB1_MAS0(1, 3, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PEX_MEM_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PEX_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
/*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xb0000000 256M PCI2 MEM Second half
+ * TLB 4: Reserved for future usage
*/
- .long TLB1_MAS0(1, 4, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
/*
* TLB 5: 64M Non-cacheable, guarded
* 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 16M PCI1 IO
- * 0xe300_0000 16M PCI2 IO
+ * 0xe200_0000 8M PCI1 IO
+ * 0xe280_0000 8M PCI2 IO
+ * 0xe300_0000 16M PEX IO
*/
.long TLB1_MAS0(1, 5, 0)
.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
@@ -200,19 +198,22 @@
.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
.long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0)
.long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1)
-
+2:
entry_end
/*
* LAW(Local Access Window) configuration:
*
* 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
+ * 0x8000_0000 0x8fff_ffff PCI1 MEM 256M
+ * 0x9000_0000 0x9fff_ffff PCI2 MEM 256M
+ * 0xa000_0000 0xbfff_ffff PEX MEM 512M
+ * 0xc000_0000 0xdfff_ffff RapidIO 512M
* 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe20f_ffff PCI1 IO 1M
- * 0xe210_0000 0xe21f_ffff PCI2 IO 1M
- * 0xf000_0000 0xf7ff_ffff SDRAM 128M
+ * 0xe200_0000 0xe27f_ffff PCI1 IO 8M
+ * 0xe280_0000 0xe2ff_ffff PCI2 IO 8M
+ * 0xe300_0000 0xe3ff_ffff PEX IO 16M
+ * 0xf000_0000 0xf3ff_ffff SDRAM 64M
* 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M
* 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M
* 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M
@@ -229,27 +230,39 @@
#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
+#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_256M))
#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
+#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_256M))
#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
+#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
+#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_8M))
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
+#define LAWBAR6 ((CFG_PEX_MEM_BASE>>12) & 0xfffff)
+#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
+#define LAWBAR7 ((CFG_PEX_IO_PHYS>>12) & 0xfffff)
+#define LAWAR7 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_16M))
+
+#define LAWBAR8 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
+#define LAWAR8 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
.section .bootpg, "ax"
.globl law_entry
law_entry:
entry_start
- .long 6
+ .long (4f-3f)/8
+3:
.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
+ .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5,LAWBAR6,LAWAR6,LAWBAR7,LAWAR7
+ .long LAWBAR8,LAWAR8
+4:
entry_end
diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c
index 7433ebf..929ff2e 100644
--- a/board/cds/mpc8548cds/mpc8548cds.c
+++ b/board/cds/mpc8548cds/mpc8548cds.c
@@ -51,6 +51,7 @@
{
volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
/* PCI slot in USER bits CSR[6:7] by convention. */
uint pci_slot = get_pci_slot ();
@@ -89,6 +90,12 @@
*/
local_bus_init ();
+ /*
+ * Fix CPU2 errata: A core hang possible while executing a
+ * msync instruction and a snoopable transaction from an I/O
+ * master tagged to make quick forward progress is present.
+ */
+ ecm->eebpcr |= (1 << 16);
/*
* Hack TSEC 3 and 4 IO voltages.
@@ -303,11 +310,14 @@
static struct pci_config_table pci_mpc85xxcds_config_table[] = {
{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
- {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
+ {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1,
+ mpc85xx_config_via_usbide, {0,0,0}},
{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
- {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
- {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
+ {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5,
+ mpc85xx_config_via_power, {0,0,0}},
+ {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}},
+ {},
};
static struct pci_controller hose[] = {
diff --git a/board/cds/mpc8548cds/u-boot.lds b/board/cds/mpc8548cds/u-boot.lds
index 2c8fe96..c1f3495 100644
--- a/board/cds/mpc8548cds/u-boot.lds
+++ b/board/cds/mpc8548cds/u-boot.lds
@@ -69,6 +69,7 @@
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
cpu/mpc85xx/cpu.o (.text)
+ drivers/tsec.o (.text)
cpu/mpc85xx/speed.o (.text)
cpu/mpc85xx/pci.o (.text)
common/dlmalloc.o (.text)
diff --git a/board/cds/mpc8555cds/mpc8555cds.c b/board/cds/mpc8555cds/mpc8555cds.c
index d980ea6..704bf03 100644
--- a/board/cds/mpc8555cds/mpc8555cds.c
+++ b/board/cds/mpc8555cds/mpc8555cds.c
@@ -474,11 +474,14 @@
static struct pci_config_table pci_mpc85xxcds_config_table[] = {
{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
- {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
+ {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1,
+ mpc85xx_config_via_usbide, {0,0,0}},
{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
- {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
- {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
+ {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5,
+ mpc85xx_config_via_power, {0,0,0}},
+ {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}},
+ {},
};
@@ -487,7 +490,7 @@
config_table: pci_mpc85xxcds_config_table,
},
#ifdef CONFIG_MPC85XX_PCI2
- { }
+ {},
#endif
};
diff --git a/board/cds/mpc8555cds/u-boot.lds b/board/cds/mpc8555cds/u-boot.lds
index 2aa2ad7..9285928 100644
--- a/board/cds/mpc8555cds/u-boot.lds
+++ b/board/cds/mpc8555cds/u-boot.lds
@@ -69,6 +69,7 @@
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
cpu/mpc85xx/cpu.o (.text)
+ drivers/tsec.o (.text)
cpu/mpc85xx/speed.o (.text)
cpu/mpc85xx/pci.o (.text)
common/dlmalloc.o (.text)
diff --git a/board/mpc8641hpcn/pixis.c b/board/freescale/common/pixis.c
similarity index 60%
rename from board/mpc8641hpcn/pixis.c
rename to board/freescale/common/pixis.c
index 964a17c..af98157 100644
--- a/board/mpc8641hpcn/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -23,14 +23,25 @@
*/
#include <common.h>
-#include <watchdog.h>
#include <command.h>
+#include <watchdog.h>
#include <asm/cache.h>
-#include <mpc86xx.h>
#include "pixis.h"
+static ulong strfractoint(uchar *strptr);
+
+
+/*
+ * Simple board reset.
+ */
+void pixis_reset(void)
+{
+ out8(PIXIS_BASE + PIXIS_RST, 0);
+}
+
+
/*
* Per table 27, page 58 of MPC8641HPCN spec.
*/
@@ -235,7 +246,8 @@
}
-int disable_watchdog(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp,
+ int flag, int argc, char *argv[])
{
u8 tmp;
@@ -252,7 +264,7 @@
}
U_BOOT_CMD(
- diswd, 1, 0, disable_watchdog,
+ diswd, 1, 0, pixis_disable_watchdog_cmd,
"diswd - Disable watchdog timer \n",
NULL);
@@ -263,7 +275,7 @@
* input: strptr i.e. argv[2]
*/
-ulong strfractoint(uchar *strptr)
+static ulong strfractoint(uchar *strptr)
{
int i, j, retval;
int mulconst;
@@ -319,3 +331,142 @@
return retval;
}
+
+
+int
+pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ ulong val;
+ ulong corepll;
+
+ /*
+ * No args is a simple reset request.
+ */
+ if (argc <= 1) {
+ pixis_reset();
+ /* not reached */
+ }
+
+ if (strcmp(argv[1], "cf") == 0) {
+
+ /*
+ * Reset with frequency changed:
+ * cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
+ */
+ if (argc < 5) {
+ puts(cmdtp->usage);
+ return 1;
+ }
+
+ read_from_px_regs(0);
+
+ val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));
+
+ corepll = strfractoint(argv[3]);
+ val = val + set_px_corepll(corepll);
+ val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
+ if (val == 3) {
+ puts("Setting registers VCFGEN0 and VCTL\n");
+ read_from_px_regs(1);
+ puts("Resetting board with values from ");
+ puts("VSPEED0, VSPEED1, VCLKH, and VCLKL \n");
+ set_px_go();
+ } else {
+ puts(cmdtp->usage);
+ return 1;
+ }
+
+ while (1) ; /* Not reached */
+
+ } else if (strcmp(argv[1], "altbank") == 0) {
+
+ /*
+ * Reset using alternate flash bank:
+ */
+ if (argv[2] == 0) {
+ /*
+ * Reset from alternate bank without changing
+ * frequency and without watchdog timer enabled.
+ * altbank
+ */
+ read_from_px_regs(0);
+ read_from_px_regs_altbank(0);
+ if (argc > 2) {
+ puts(cmdtp->usage);
+ return 1;
+ }
+ puts("Setting registers VCFGNE1, VBOOT, and VCTL\n");
+ set_altbank();
+ read_from_px_regs_altbank(1);
+ puts("Resetting board to boot from the other bank.\n");
+ set_px_go();
+
+ } else if (strcmp(argv[2], "cf") == 0) {
+ /*
+ * Reset with frequency changed
+ * altbank cf <SYSCLK freq> <COREPLL ratio>
+ * <MPXPLL ratio>
+ */
+ read_from_px_regs(0);
+ read_from_px_regs_altbank(0);
+ val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));
+ corepll = strfractoint(argv[4]);
+ val = val + set_px_corepll(corepll);
+ val = val + set_px_mpxpll(simple_strtoul(argv[5],
+ NULL, 10));
+ if (val == 3) {
+ puts("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
+ set_altbank();
+ read_from_px_regs(1);
+ read_from_px_regs_altbank(1);
+ puts("Enabling watchdog timer on the FPGA\n");
+ puts("Resetting board with values from ");
+ puts("VSPEED0, VSPEED1, VCLKH and VCLKL ");
+ puts("to boot from the other bank.\n");
+ set_px_go_with_watchdog();
+ } else {
+ puts(cmdtp->usage);
+ return 1;
+ }
+
+ while (1) ; /* Not reached */
+
+ } else if (strcmp(argv[2], "wd") == 0) {
+ /*
+ * Reset from alternate bank without changing
+ * frequencies but with watchdog timer enabled:
+ * altbank wd
+ */
+ read_from_px_regs(0);
+ read_from_px_regs_altbank(0);
+ puts("Setting registers VCFGEN1, VBOOT, and VCTL\n");
+ set_altbank();
+ read_from_px_regs_altbank(1);
+ puts("Enabling watchdog timer on the FPGA\n");
+ puts("Resetting board to boot from the other bank.\n");
+ set_px_go_with_watchdog();
+ while (1) ; /* Not reached */
+
+ } else {
+ puts(cmdtp->usage);
+ return 1;
+ }
+
+ } else {
+ puts(cmdtp->usage);
+ return 1;
+ }
+
+ return 0;
+}
+
+
+U_BOOT_CMD(
+ pixis_reset, CFG_MAXARGS, 1, pixis_reset_cmd,
+ "pixis_reset - Reset the board using the FPGA sequencer\n",
+ " pixis_reset\n"
+ " pixis_reset [altbank]\n"
+ " pixis_reset altbank wd\n"
+ " pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
+ " pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
+ );
diff --git a/board/mpc8641hpcn/pixis.h b/board/freescale/common/pixis.h
similarity index 89%
rename from board/mpc8641hpcn/pixis.h
rename to board/freescale/common/pixis.h
index cd9a45d..ff62a62 100644
--- a/board/mpc8641hpcn/pixis.h
+++ b/board/freescale/common/pixis.h
@@ -20,6 +20,7 @@
* MA 02111-1307 USA
*/
+extern void pixis_reset(void);
extern int set_px_sysclk(ulong sysclk);
extern int set_px_mpxpll(ulong mpxpll);
extern int set_px_corepll(ulong corepll);
@@ -28,6 +29,3 @@
extern void set_altbank(void);
extern void set_px_go(void);
extern void set_px_go_with_watchdog(void);
-extern int disable_watchdog(cmd_tbl_t *cmdtp,
- int flag, int argc, char *argv[]);
-extern ulong strfractoint(uchar *strptr);
diff --git a/board/freescale/mpc8544ds/Makefile b/board/freescale/mpc8544ds/Makefile
new file mode 100644
index 0000000..bec2168
--- /dev/null
+++ b/board/freescale/mpc8544ds/Makefile
@@ -0,0 +1,58 @@
+#
+# Copyright 2007 Freescale Semiconductor, Inc.
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+# ifneq ($(OBJTREE),$(SRCTREE))
+# $(shell mkdir -p $(obj)./common)
+# endif
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o \
+ ../common/pixis.o
+
+SOBJS := init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mpc8544ds/config.mk b/board/freescale/mpc8544ds/config.mk
new file mode 100644
index 0000000..85663ef
--- /dev/null
+++ b/board/freescale/mpc8544ds/config.mk
@@ -0,0 +1,32 @@
+#
+# Copyright 2007 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# mpc8544ds board
+#
+ifndef TEXT_BASE
+TEXT_BASE = 0xfff80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8544=1
diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S
new file mode 100644
index 0000000..296fee5
--- /dev/null
+++ b/board/freescale/mpc8544ds/init.S
@@ -0,0 +1,243 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+#define LAWAR_TRGT_PCI1 0x00000000
+#define LAWAR_TRGT_PCIE1 0x00200000
+#define LAWAR_TRGT_PCIE2 0x00100000
+#define LAWAR_TRGT_PCIE3 0x00300000
+#define LAWAR_TRGT_LBC 0x00400000
+#define LAWAR_TRGT_DDR 0x00f00000
+
+/*
+ * TLB0 and TLB1 Entries
+ *
+ * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
+ * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
+ * these TLB entries are established.
+ *
+ * The TLB entries for DDR are dynamically setup in spd_sdram()
+ * and use TLB1 Entries 8 through 15 as needed according to the
+ * size of DDR memory.
+ *
+ * MAS0: tlbsel, esel, nv
+ * MAS1: valid, iprot, tid, ts, tsize
+ * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
+ */
+
+#define entry_start \
+ mflr r1 ; \
+ bl 0f ;
+
+#define entry_end \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+
+ .section .bootpg, "ax"
+ .globl tlb1_entry
+tlb1_entry:
+ entry_start
+
+ /*
+ * Number of TLB0 and TLB1 entries in the following table
+ */
+ .long (2f-1f)/16
+1:
+ /*
+ * TLB0 4K Non-cacheable, guarded
+ * 0xff700000 4K Initial CCSRBAR mapping
+ *
+ * This ends up at a TLB0 Index==0 entry, and must not collide
+ * with other TLB0 Entries.
+ */
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB0 16K Cacheable, guarded
+ * Temporary Global data for initialization
+ *
+ * Use four 4K TLB0 entries. These entries must be cacheable
+ * as they provide the bootstrap memory before the memory
+ * controler and real memory have been configured.
+ *
+ * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
+ * and must not collide with other TLB0 entries.
+ */
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
+ 0,0,0,0,0,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
+ 0,0,0,0,0,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
+ 0,0,0,0,0,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
+ 0,0,0,0,0,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
+ 0,0,0,0,0,1,0,1,0,1)
+
+
+ /*
+ * TLB 0: 64M Non-cacheable, guarded
+ * 0xfc000000 64M Covers FLASH at 0xFE800000 and 0xFF800000
+ * Out of reset this entry is only 4K.
+ */
+ .long TLB1_MAS0(1, 0, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_BOOT_BLOCK), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_BOOT_BLOCK), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 1: 1G Non-cacheable, guarded
+ * 0x80000000 1G PCIE 8,9,a,b
+ */
+ .long TLB1_MAS0(1, 1, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCIE_PHYS),
+ 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCIE_PHYS),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ */
+ .long TLB1_MAS0(1, 2, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI_PHYS),
+ 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI_PHYS), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ */
+ .long TLB1_MAS0(1, 3, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI_PHYS + 0x10000000),
+ 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI_PHYS + 0x10000000),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 4: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe100_0000 255M PCI IO range
+ */
+ .long TLB1_MAS0(1, 4, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+
+#ifdef CFG_LBC_CACHE_BASE
+ /*
+ * TLB 5: 64M Cacheable, non-guarded
+ */
+ .long TLB1_MAS0(1, 5, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_CACHE_BASE), 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_CACHE_BASE), 0,0,0,0,0,1,0,1,0,1)
+#endif
+ /*
+ * TLB 6: 64M Non-cacheable, guarded
+ * 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF
+ */
+ .long TLB1_MAS0(1, 6, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_NONCACHE_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_NONCACHE_BASE), 0,0,0,0,0,1,0,1,0,1)
+2:
+ entry_end
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ * LAW 0 is reserved for boot mapping
+ */
+
+ .section .bootpg, "ax"
+ .globl law_entry
+law_entry:
+ entry_start
+
+ .long (4f-3f)/8
+3:
+ .long 0
+ .long (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
+
+ .long (CFG_PCI1_MEM_BASE>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+
+ .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M)
+
+ .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
+
+ .long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M)
+
+ /* To keep to 10 LAWs, PCIE1_IO_PHYS must use top of mem region */
+
+ .long (CFG_PCIE2_MEM_PHYS>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+
+ .long (CFG_PCIE2_IO_PHYS>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_16M)
+
+ .long (CFG_PCIE3_MEM_PHYS>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_256M)
+
+ .long (CFG_PCIE3_IO_PHYS>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_16M)
+4:
+ entry_end
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
new file mode 100644
index 0000000..4ff1da9
--- /dev/null
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -0,0 +1,201 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <spd.h>
+#include <miiphy.h>
+
+#include "../common/pixis.h"
+
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+extern void ft_cpu_setup(void *blob, bd_t *bd);
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+extern long int spd_sdram(void);
+
+void sdram_init(void);
+
+int board_early_init_f (void)
+{
+ return 0;
+}
+
+int checkboard (void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+
+ if ((uint)&gur->porpllsr != 0xe00e0000) {
+ printf("immap size error %x\n",&gur->porpllsr);
+ }
+ printf ("Board: MPC8544DS\n");
+
+ return 0;
+}
+
+long int
+initdram(int board_type)
+{
+ long dram_size = 0;
+
+ puts("Initializing\n");
+
+ dram_size = spd_sdram();
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /*
+ * Initialize and enable DDR ECC.
+ */
+ ddr_enable_ecc(dram_size);
+#endif
+ puts(" DDR: ");
+ return dram_size;
+}
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+ uint *pstart = (uint *) CFG_MEMTEST_START;
+ uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *p;
+
+ printf("Testing DRAM from 0x%08x to 0x%08x\n",
+ CFG_MEMTEST_START,
+ CFG_MEMTEST_END);
+
+ printf("DRAM test phase 1:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test phase 2:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test passed.\n");
+ return 0;
+}
+#endif
+
+int last_stage_init(void)
+{
+ return 0;
+}
+
+
+unsigned long
+get_board_sys_clk(ulong dummy)
+{
+ u8 i, go_bit, rd_clks;
+ ulong val = 0;
+
+ go_bit = in8(PIXIS_BASE + PIXIS_VCTL);
+ go_bit &= 0x01;
+
+ rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0);
+ rd_clks &= 0x1C;
+
+ /*
+ * Only if both go bit and the SCLK bit in VCFGEN0 are set
+ * should we be using the AUX register. Remember, we also set the
+ * GO bit to boot from the alternate bank on the on-board flash
+ */
+
+ if (go_bit) {
+ if (rd_clks == 0x1c)
+ i = in8(PIXIS_BASE + PIXIS_AUX);
+ else
+ i = in8(PIXIS_BASE + PIXIS_SPD);
+ } else {
+ i = in8(PIXIS_BASE + PIXIS_SPD);
+ }
+
+ i &= 0x07;
+
+ switch (i) {
+ case 0:
+ val = 33333333;
+ break;
+ case 1:
+ val = 40000000;
+ break;
+ case 2:
+ val = 50000000;
+ break;
+ case 3:
+ val = 66666666;
+ break;
+ case 4:
+ val = 83000000;
+ break;
+ case 5:
+ val = 100000000;
+ break;
+ case 6:
+ val = 133333333;
+ break;
+ case 7:
+ val = 166666666;
+ break;
+ }
+
+ return val;
+}
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ ft_cpu_setup(blob, bd);
+
+ p = ft_get_prop(blob, "/memory/reg", &len);
+ if (p != NULL) {
+ *p++ = cpu_to_be32(bd->bi_memstart);
+ *p = cpu_to_be32(bd->bi_memsize);
+ }
+}
+#endif
diff --git a/board/freescale/mpc8544ds/u-boot.lds b/board/freescale/mpc8544ds/u-boot.lds
new file mode 100644
index 0000000..1a8aaa9
--- /dev/null
+++ b/board/freescale/mpc8544ds/u-boot.lds
@@ -0,0 +1,148 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ board/freescale/mpc8544ds/init.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc85xx/start.o (.text)
+ board/freescale/mpc8544ds/init.o (.text)
+ cpu/mpc85xx/traps.o (.text)
+ cpu/mpc85xx/interrupts.o (.text)
+ cpu/mpc85xx/cpu_init.o (.text)
+ cpu/mpc85xx/cpu.o (.text)
+ cpu/mpc85xx/speed.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/ixdp425/config.mk b/board/ixdp425/config.mk
index d49c0e7..ecff8d7 100644
--- a/board/ixdp425/config.mk
+++ b/board/ixdp425/config.mk
@@ -1,4 +1,2 @@
+#
TEXT_BASE = 0x00f80000
-
-# include NPE ethernet driver
-BOARDLIBS = $(obj)cpu/ixp/npe/libnpe.a
diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c
index 98b86d1..726366d 100644
--- a/board/mcc200/lcd.c
+++ b/board/mcc200/lcd.c
@@ -180,10 +180,6 @@
break;
udelay (PSOC_WAIT_TIME);
}
- if (!retries) {
- printf ("%s Warning: PSoC doesn't respond on "
- "RTS NEGATE\n", __FUNCTION__);
- }
return;
}
diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c
index d60d233..6eb5fe9 100644
--- a/board/motionpro/motionpro.c
+++ b/board/motionpro/motionpro.c
@@ -28,7 +28,14 @@
#include <common.h>
#include <mpc5xxx.h>
+#include <miiphy.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+#if defined(CONFIG_STATUS_LED)
+#include <status_led.h>
+#endif /* CONFIG_STATUS_LED */
/* Kollmorgen DPR initialization data */
struct init_elem {
@@ -75,11 +82,27 @@
}
+/*
+ * Additional PHY intialization. After being reset in mpc5xxx_fec_init_phy(),
+ * PHY goes into FX mode. To take it out of the FX mode and switch into
+ * desired TX operation, one needs to clear the FX_SEL bit of Mode Control
+ * Register.
+ */
+void reset_phy(void)
+{
+ unsigned short mode_control;
+
+ miiphy_read("FEC ETHERNET", CONFIG_PHY_ADDR, 0x15, &mode_control);
+ miiphy_write("FEC ETHERNET", CONFIG_PHY_ADDR, 0x15,
+ mode_control & 0xfffe);
+ return;
+}
+
#ifndef CFG_RAMBOOT
/*
* Helper function to initialize SDRAM controller.
*/
-static void sdram_start (int hi_addr)
+static void sdram_start(int hi_addr)
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -111,7 +134,7 @@
/*
* Initalize SDRAM - configure SDRAM controller, detect memory size.
*/
-long int initdram (int board_type)
+long int initdram(int board_type)
{
ulong dramsize = 0;
#ifndef CFG_RAMBOOT
@@ -165,8 +188,43 @@
}
-int checkboard (void)
+int checkboard(void)
{
- puts("Board: Promess Motion-PRO board\n");
+ uchar rev = *(vu_char *)CPLD_REV_REGISTER;
+ printf("Board: Promess Motion-PRO board (CPLD rev. 0x%02x)\n", rev);
return 0;
}
+
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+}
+#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
+
+
+#if defined(CONFIG_STATUS_LED)
+void __led_init(led_id_t regaddr, int state)
+{
+ *((vu_long *) regaddr) |= ENABLE_GPIO_OUT;
+
+ if (state == STATUS_LED_ON)
+ *((vu_long *) regaddr) |= LED_ON;
+ else
+ *((vu_long *) regaddr) &= ~LED_ON;
+}
+
+void __led_set(led_id_t regaddr, int state)
+{
+ if (state == STATUS_LED_ON)
+ *((vu_long *) regaddr) |= LED_ON;
+ else
+ *((vu_long *) regaddr) &= ~LED_ON;
+}
+
+void __led_toggle(led_id_t regaddr)
+{
+ *((vu_long *) regaddr) ^= LED_ON;
+}
+#endif /* CONFIG_STATUS_LED */
diff --git a/board/mpc7448hpc2/Makefile b/board/mpc7448hpc2/Makefile
new file mode 100644
index 0000000..e3d757d
--- /dev/null
+++ b/board/mpc7448hpc2/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o tsi108_init.o
+SOBJS := asm_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+.PHONY: distclean
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude ($obj).depend
+
+#########################################################################
diff --git a/board/mpc7448hpc2/asm_init.S b/board/mpc7448hpc2/asm_init.S
new file mode 100644
index 0000000..a7a40a1
--- /dev/null
+++ b/board/mpc7448hpc2/asm_init.S
@@ -0,0 +1,918 @@
+/*
+ * (C) Copyright 2004-05; Tundra Semiconductor Corp.
+ *
+ * Added automatic detect of SDC settings
+ * Copyright (c) 2005 Freescale Semiconductor, Inc.
+ * Maintainer tie-fei.zang@freescale.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * FILENAME: asm_init.s
+ *
+ * Originator: Alex Bounine
+ *
+ * DESCRIPTION:
+ * Initialization code for the Tundra Tsi108 bridge chip
+ *
+ */
+
+#include <config.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/processor.h>
+
+#include <tsi108.h>
+
+/*
+ * Build Configuration Options
+ */
+
+/* #define DISABLE_PBM disables usage of PB Master */
+/* #define SDC_HARDCODED_INIT config SDRAM controller with hardcoded values */
+/* #define SDC_AUTOPRECH_EN enable SDRAM auto precharge */
+
+/*
+ * Hardcoded SDC settings
+ */
+
+#ifdef SDC_HARDCODED_INIT
+
+/* Micron MT9HTF6472AY-40EA1 : Unbuffered, 512MB, 400, CL3, Single Rank */
+
+#define VAL_SD_REFRESH (0x61A)
+#define VAL_SD_TIMING (0x0308336b)
+#define VAL_SD_D0_CTRL (0x07100021) /* auto-precharge disabled */
+#define VAL_SD_D0_BAR (0x0FE00000) /* 512MB @ 0x00000000 */
+#define VAL_SD_D1_CTRL (0x07100021) /* auto-precharge disabled */
+#define VAL_SD_D1_BAR (0x0FE00200) /* 512MB @ 0x20000000 */
+
+#endif /* SDC_HARDCODED_INIT */
+
+/*
+ CPU Configuration:
+
+ CPU Address and Data Parity enables.
+
+#define CPU_AP
+#define CPU_DP
+*/
+
+/*
+ * Macros
+ * !!! Attention !!! Macros LOAD_PTR, LOAD_U32 and LOAD_MEM defined below are
+ * expected to work correctly for the CSR space within 32KB range.
+ *
+ * LOAD_PTR and LOAD_U32 - load specified register with a 32 bit constant.
+ * These macros are absolutely identical except their names. This difference
+ * is provided intentionally for better readable code.
+ */
+
+#define LOAD_PTR(reg,const32) \
+ addis reg,r0,const32@h; ori reg,reg,const32@l
+
+#define LOAD_U32(reg,const32) \
+ addis reg,r0,const32@h; ori reg,reg,const32@l
+
+/* LOADMEM initializes a register with the contents of a specified 32-bit
+ * memory location, usually a CSR value.
+ */
+
+#define LOAD_MEM(reg,addr32) \
+ addis reg,r0,addr32@ha; lwz reg,addr32@l(reg)
+
+#ifndef SDC_HARDCODED_INIT
+sdc_clk_sync:
+ /* MHz: 0,0,183,100,133,167,200,233 */
+ .long 0, 0, 6, 10, 8, 6, 5, 4 /* nSec */
+#endif
+
+/*
+ * board_asm_init() - early initialization function. Coded to be portable to
+ * dual-CPU configuration.
+ * Checks CPU number and performs board HW initialization if called for CPU0.
+ * Registers used: r3,r4,r5,r6,r19,r29
+ *
+ * NOTE: For dual-CPU configuration only CPU0 is allowed to configure Tsi108
+ * and the rest of the board. Current implementation demonstrates two
+ * possible ways to identify CPU number:
+ * - for MPC74xx platform: uses MSSCR0[ID] bit as defined in UM.
+ * - for PPC750FX/GX boards: uses WHO_AM_I bit reported by Tsi108.
+ */
+
+ .globl board_asm_init
+board_asm_init:
+ mflr r19 /* Save LR to be able return later. */
+ bl icache_enable /* Enable icache to reduce reads from flash. */
+
+/* Initialize pointer to Tsi108 register space */
+
+ LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */
+ ori r4,r29,TSI108_PB_REG_OFFSET
+
+/* Check Processor Version Number */
+
+ mfspr r3, PVR
+ rlwinm r3,r3,16,16,23 /* get ((Processor Version Number) & 0xFF00) */
+
+ cmpli 0,0,r3,0x8000 /* MPC74xx */
+ bne cont_brd_init
+
+ /*
+ * For MPC744x/5x enable extended BATs[4-7]
+ * Sri: Set HIGH_BAT_EN and XBSEN, and SPD =1
+ * to disable prefetch
+ */
+
+ mfspr r5, HID0
+ oris r5, r5, 0x0080 /* Set HID0[HIGH_BAT_EN] bit #8 */
+ ori r5, r5, 0x0380 /* Set SPD,XBSEN,SGE bits #22,23,24 */
+ mtspr HID0, r5
+ isync
+ sync
+
+ /* Adding code to disable external interventions in MPX bus mode */
+ mfspr r3, 1014
+ oris r3, r3, 0x0100 /* Set the EIDIS bit in MSSCR0: bit 7 */
+ mtspr 1014, r3
+ isync
+ sync
+
+ /* Sri: code to enable FP unit */
+ mfmsr r3
+ ori r3, r3, 0x2000
+ mtmsr r3
+ isync
+ sync
+
+ /* def CONFIG_DUAL_CPU
+ * For MPC74xx processor, use MSSCR0[ID] bit to identify CPU number.
+ */
+#if(1)
+ mfspr r3,1014 /* read MSSCR0 */
+ rlwinm. r3,r3,27,31,31 /* get processor ID number */
+ mtspr SPRN_PIR,r3 /* Save CPU ID */
+ sync
+ bne init_done
+ b do_tsi108_init
+
+cont_brd_init:
+
+ /* An alternative method of checking the processor number (in addition
+ * to configuration using MSSCR0[ID] bit on MPC74xx).
+ * Good for IBM PPC750FX/GX.
+ */
+
+ lwz r3,PB_BUS_MS_SELECT(r4) /* read PB_ID register */
+ rlwinm. r3,r3,24,31,31 /* get processor ID number */
+ bne init_done
+#else
+
+cont_brd_init:
+
+#endif /* CONFIG_DUAL_CPU */
+
+ /* Initialize Tsi108 chip */
+
+do_tsi108_init:
+
+ /*
+ * Adjust HLP/Flash parameters. By default after reset the HLP port is
+ * set to support slow devices. Better performance can be achived when
+ * an optimal parameters are used for specific EPROM device.
+ * NOTE: This should be performed ASAP for the emulation platform
+ * because it has 5MHz HLP clocking.
+ */
+
+#ifdef CONFIG_TSI108EMU
+ ori r4,r29,TSI108_HLP_REG_OFFSET
+ LOAD_U32(r5,0x434422c0)
+ stw r5,0x08(r4) /* set HLP B0_CTRL0 */
+ sync
+ LOAD_U32(r5,0xd0012000)
+ stw r5,0x0c(r4) /* set HLP B0_CTRL1 */
+ sync
+#endif
+
+ /* Initialize PB interface. */
+
+ ori r4,r29,TSI108_PB_REG_OFFSET
+
+#if (CFG_TSI108_CSR_BASE != CFG_TSI108_CSR_RST_BASE)
+ /* Relocate (if required) Tsi108 registers. Set new value for
+ * PB_REG_BAR:
+ * Note we are in the 32-bit address mode.
+ */
+ LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */
+ stw r5,PB_REG_BAR(r4)
+ andis. r29,r5,0xFFFF
+ sync
+ ori r4,r29,TSI108_PB_REG_OFFSET
+#endif
+
+ /* Set PB Slave configuration register */
+
+ LOAD_U32(r5,0x00002481) /* PB_SCR: TEA enabled,AACK delay = 1 */
+ lwz r3, PB_RSR(r4) /* get PB bus mode */
+ xori r3,r3,0x0001 /* mask PB_BMODE: r3 -> (0 = 60X, 1 = MPX) */
+ rlwimi r5,r3,14,17,17 /* for MPX: set DTI_MODE bit */
+ stw r5,PB_SCR(r4)
+ sync
+
+ /* Configure PB Arbiter */
+
+ lwz r5,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */
+ li r3, 0x00F0 /* ARB_PIPELINE_DEP mask */
+#ifdef DISABLE_PBM
+ ori r3,r3,0x1000 /* add PBM_EN to clear (enabled by default) */
+#endif
+ andc r5,r5,r3 /* Clear the masked bit fields */
+ ori r5,r5,0x0001 /* Set pipeline depth */
+ stw r5,PB_ARB_CTRL(r4)
+
+#if (0) /* currently using the default settings for PBM after reset */
+ LOAD_U32(r5,0x) /* value for PB_MCR */
+ stw r5,PB_MCR(r4)
+ sync
+
+ LOAD_U32(r5,0x) /* value for PB_MCMD */
+ stw r5,PB_MCMD(r4)
+ sync
+#endif
+
+ /* Disable or enable PVT based on processor bus frequency
+ * 1. Read CG_PWRUP_STATUS register field bits 18,17,16
+ * 2. See if the value is < or > 133mhz (18:16 = 100)
+ * 3. If > enable PVT
+ */
+
+ LOAD_U32(r3,0xC0002234)
+ lwz r3,0(r3)
+ rlwinm r3,r3,16,29,31
+
+ cmpi 0,0,r3,0x0004
+ bgt sdc_init
+
+#ifndef CONFIG_TSI108EMU
+ /* FIXME: Disable PB calibration control for any real Tsi108 board */
+ li r5,0x0101 /* disable calibration control */
+ stw r5,PB_PVT_CTRL2(r4)
+ sync
+#endif
+
+ /* Initialize SDRAM controller. */
+
+sdc_init:
+
+#ifndef SDC_HARDCODED_INIT
+ /* get SDC clock prior doing sdram controller autoconfig */
+ ori r4,r29,TSI108_CLK_REG_OFFSET /* r4 - ptr to CG registers */
+ lwz r3, CG_PWRUP_STATUS(r4) /* get CG configuration */
+ rlwinm r3,r3,12,29,31 /* r3 - SD clk */
+ lis r5,sdc_clk_sync@h
+ ori r5,r5,sdc_clk_sync@l
+ /* Sri: At this point check if r3 = 001. If yes,
+ * the memory frequency should be same as the
+ * MPX bus frequency
+ */
+ cmpi 0,0,r3,0x0001
+ bne get_nsec
+ lwz r6, CG_PWRUP_STATUS(r4)
+ rlwinm r6,r6,16,29,31
+ mr r3,r6
+
+get_nsec:
+ rlwinm r3,r3,2,0,31
+ lwzx r9,r5,r3 /* get SD clk rate in nSec */
+ /* ATTN: r9 will be used by SPD routine */
+#endif /* !SDC_HARDCODED_INIT */
+
+ ori r4,r29,TSI108_SD_REG_OFFSET /* r4 - ptr to SDRAM registers */
+
+ /* Initialize SDRAM controller. SDRAM Size = 512MB, One DIMM. */
+
+ LOAD_U32(r5,0x00)
+ stw r5,SD_INT_ENABLE(r4) /* Ensure that interrupts are disabled */
+#ifdef ENABLE_SDRAM_ECC
+ li r5, 0x01
+#endif /* ENABLE_SDRAM_ECC */
+ stw r5,SD_ECC_CTRL(r4) /* Enable/Disable ECC */
+ sync
+
+#ifdef SDC_HARDCODED_INIT /* config sdram controller with hardcoded values */
+
+ /* First read the CG_PWRUP_STATUS register to get the
+ * memory speed from bits 22,21,20
+ */
+
+ LOAD_U32(r3,0xC0002234)
+ lwz r3,0(r3)
+ rlwinm r3,r3,12,29,31
+
+ /* Now first check for 166, then 200, or default */
+
+ cmpi 0,0,r3,0x0005
+ bne check_for_200mhz
+
+ /* set values for 166 Mhz memory speed
+ * Set refresh rate and timing parameters
+ */
+ LOAD_U32(r5,0x00000515)
+ stw r5,SD_REFRESH(r4)
+ LOAD_U32(r5,0x03073368)
+ stw r5,SD_TIMING(r4)
+ sync
+
+ /* Initialize DIMM0 control and BAR registers */
+ LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
+#endif
+ stw r5,SD_D0_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D0_BAR)
+ stw r5,SD_D0_BAR(r4)
+ sync
+
+ /* Initialize DIMM1 control and BAR registers
+ * (same as dimm 0, next 512MB, disabled)
+ */
+ LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
+#endif
+ stw r5,SD_D1_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D1_BAR)
+ stw r5,SD_D1_BAR(r4)
+ sync
+
+ b sdc_init_done
+
+check_for_200mhz:
+
+ cmpi 0,0,r3,0x0006
+ bne set_default_values
+
+ /* set values for 200Mhz memory speed
+ * Set refresh rate and timing parameters
+ */
+ LOAD_U32(r5,0x0000061a)
+ stw r5,SD_REFRESH(r4)
+ LOAD_U32(r5,0x03083348)
+ stw r5,SD_TIMING(r4)
+ sync
+
+ /* Initialize DIMM0 control and BAR registers */
+ LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
+#endif
+ stw r5,SD_D0_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D0_BAR)
+ stw r5,SD_D0_BAR(r4)
+ sync
+
+ /* Initialize DIMM1 control and BAR registers
+ * (same as dimm 0, next 512MB, disabled)
+ */
+ LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
+#endif
+ stw r5,SD_D1_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D1_BAR)
+ stw r5,SD_D1_BAR(r4)
+ sync
+
+ b sdc_init_done
+
+set_default_values:
+
+ /* Set refresh rate and timing parameters */
+ LOAD_U32(r5,VAL_SD_REFRESH)
+ stw r5,SD_REFRESH(r4)
+ LOAD_U32(r5,VAL_SD_TIMING)
+ stw r5,SD_TIMING(r4)
+ sync
+
+ /* Initialize DIMM0 control and BAR registers */
+ LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
+#endif
+ stw r5,SD_D0_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D0_BAR)
+ stw r5,SD_D0_BAR(r4)
+ sync
+
+ /* Initialize DIMM1 control and BAR registers
+ * (same as dimm 0, next 512MB, disabled)
+ */
+ LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
+#endif
+ stw r5,SD_D1_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D1_BAR)
+ stw r5,SD_D1_BAR(r4)
+ sync
+#else /* !SDC_HARDCODED_INIT */
+ bl tsi108_sdram_spd /* automatically detect SDC settings */
+#endif /* SDC_HARDCODED_INIT */
+
+sdc_init_done:
+
+#ifdef DISABLE_PBM
+ LOAD_U32(r5,0x00000030) /* PB_EN + OCN_EN */
+#else
+ LOAD_U32(r5,0x00000230) /* PB_EN + OCN_EN + PB/OCN=80/20 */
+#endif /* DISABLE_PBM */
+
+#ifdef CONFIG_TSI108EMU
+ oris r5,r5,0x0010 /* set EMULATION_MODE bit */
+#endif
+
+ stw r5,SD_CTRL(r4)
+ eieio
+ sync
+
+ /* Enable SDRAM access */
+
+ oris r5,r5,0x8000 /* start SDC: set SD_CTRL[ENABLE] bit */
+ stw r5,SD_CTRL(r4)
+ sync
+
+wait_init_complete:
+ lwz r5,SD_STATUS(r4)
+ andi. r5,r5,0x0001
+ /* wait until SDRAM initialization is complete */
+ beq wait_init_complete
+
+ /* Map SDRAM into the processor bus address space */
+
+ ori r4,r29,TSI108_PB_REG_OFFSET
+
+ /* Setup BARs associated with direct path PB<->SDRAM */
+
+ /* PB_SDRAM_BAR1:
+ * provides a direct path to the main system memory (cacheable SDRAM)
+ */
+
+ /* BA=0,Size=512MB, ENable, No Addr.Translation */
+ LOAD_U32(r5, 0x00000011)
+ stw r5,PB_SDRAM_BAR1(r4)
+ sync
+
+ /* Make sure that PB_SDRAM_BAR1 decoder is set
+ * (to allow following immediate read from SDRAM)
+ */
+ lwz r5,PB_SDRAM_BAR1(r4)
+ sync
+
+ /* PB_SDRAM_BAR2:
+ * provides non-cacheable alias (via the direct path) to main
+ * system memory.
+ * Size = 512MB, ENable, Addr.Translation - ON,
+ * BA = 0x0_40000000, TA = 0x0_00000000
+ */
+
+ LOAD_U32(r5, 0x40010011)
+ stw r5,PB_SDRAM_BAR2(r4)
+ sync
+
+ /* Make sure that PB_SDRAM_BAR2 decoder is set
+ * (to allow following immediate read from SDRAM)
+ */
+ lwz r5,PB_SDRAM_BAR2(r4)
+ sync
+
+init_done:
+
+ /* All done. Restore LR and return. */
+ mtlr r19
+ blr
+
+#if (0)
+ /*
+ * init_cpu1
+ * This routine enables CPU1 on the dual-processor system.
+ * Now there is only one processor in the system
+ */
+
+ .global enable_cpu1
+enable_cpu1:
+
+ lis r3,Tsi108_Base@ha /* Get Grendel CSR Base Addr */
+ addi r3,r3,Tsi108_Base@l
+ lwz r3,0(r3) /* R3 = CSR Base Addr */
+ ori r4,r3,TSI108_PB_REG_OFFSET
+ lwz r3,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */
+ ori r3,r3,0x0200 /* Set M1_EN bit */
+ stw r3,PB_ARB_CTRL(r4)
+
+ blr
+#endif
+
+ /*
+ * enable_EI
+ * Enable CPU core external interrupt
+ */
+
+ .global enable_EI
+enable_EI:
+ mfmsr r3
+ ori r3,r3,0x8000 /* set EE bit */
+ mtmsr r3
+ blr
+
+ /*
+ * disable_EI
+ * Disable CPU core external interrupt
+ */
+
+ .global disable_EI
+disable_EI:
+ mfmsr r3
+ li r4,-32768 /* aka "li r4,0x8000" */
+ andc r3,r3,r4 /* clear EE bit */
+ mtmsr r3
+ blr
+
+#ifdef ENABLE_SDRAM_ECC
+ /* enables SDRAM ECC */
+
+ .global enable_ECC
+enable_ECC:
+ ori r4,r29,TSI108_SD_REG_OFFSET
+ lwz r3,SD_ECC_CTRL(r4) /* Read SDRAM ECC Control Register */
+ ori r3,r3,0x0001 /* Set ECC_EN bit */
+ stw r3,SD_ECC_CTRL(r4)
+ blr
+
+ /*
+ * clear_ECC_err
+ * Clears all pending SDRAM ECC errors
+ * (normally after SDRAM scrubbing/initialization)
+ */
+
+ .global clear_ECC_err
+clear_ECC_err:
+ ori r4,r29,TSI108_SD_REG_OFFSET
+ ori r3,r0,0x0030 /* ECC_UE_INT + ECC_CE_INT bits */
+ stw r3,SD_INT_STATUS(r4)
+ blr
+
+#endif /* ENABLE_SDRAM_ECC */
+
+#ifndef SDC_HARDCODED_INIT
+
+ /* SDRAM SPD Support */
+#define SD_I2C_CTRL1 (0x400)
+#define SD_I2C_CTRL2 (0x404)
+#define SD_I2C_RD_DATA (0x408)
+#define SD_I2C_WR_DATA (0x40C)
+
+ /*
+ * SDRAM SPD Support Macros
+ */
+
+#define SPD_DIMM0 (0x00000100)
+#define SPD_DIMM1 (0x00000200) /* SPD_DIMM1 was 0x00000000 */
+
+#define SPD_RDIMM (0x01)
+#define SPD_UDIMM (0x02)
+
+#define SPD_CAS_3 0x8
+#define SPD_CAS_4 0x10
+#define SPD_CAS_5 0x20
+
+#define ERR_NO_DIMM_FOUND (0xdb0)
+#define ERR_TRAS_FAIL (0xdb1)
+#define ERR_TRCD_FAIL (0xdb2)
+#define ERR_TRP_FAIL (0xdb3)
+#define ERR_TWR_FAIL (0xdb4)
+#define ERR_UNKNOWN_PART (0xdb5)
+#define ERR_NRANK_INVALID (0xdb6)
+#define ERR_DIMM_SIZE (0xdb7)
+#define ERR_ADDR_MODE (0xdb8)
+#define ERR_RFRSH_RATE (0xdb9)
+#define ERR_DIMM_TYPE (0xdba)
+#define ERR_CL_VALUE (0xdbb)
+#define ERR_TRFC_FAIL (0xdbc)
+
+/* READ_SPD requirements:
+ * byte - byte address in SPD device (0 - 255)
+ * r3 = will return data read from I2C Byte location
+ * r4 - unchanged (SDC base addr)
+ * r5 - clobbered in routine (I2C status)
+ * r10 - number of DDR slot where first SPD device is detected
+ */
+
+#define READ_SPD(byte_num) \
+ addis r3, 0, byte_num@l; \
+ or r3, r3, r10; \
+ ori r3, r3, 0x0A; \
+ stw r3, SD_I2C_CTRL1(r4); \
+ li r3, I2C_CNTRL2_START; \
+ stw r3, SD_I2C_CTRL2(r4); \
+ eieio; \
+ sync; \
+ li r3, 0x100; \
+1:; \
+ addic. r3, r3, -1; \
+ bne 1b; \
+2:; \
+ lwz r5, SD_I2C_CTRL2(r4); \
+ rlwinm. r3,r5,0,23,23; \
+ bne 2b; \
+ rlwinm. r3,r5,0,3,3; \
+ lwz r3,SD_I2C_RD_DATA(r4)
+
+#define SPD_MIN_RFRSH (0x80)
+#define SPD_MAX_RFRSH (0x85)
+
+refresh_rates: /* in nSec */
+ .long 15625 /* Normal (0x80) */
+ .long 3900 /* Reduced 0.25x (0x81) */
+ .long 7800 /* Reduced 0.5x (0x82) */
+ .long 31300 /* Extended 2x (0x83) */
+ .long 62500 /* Extended 4x (0x84) */
+ .long 125000 /* Extended 8x (0x85) */
+
+/*
+ * tsi108_sdram_spd
+ *
+ * Inittializes SDRAM Controller using DDR2 DIMM Serial Presence Detect data
+ * Uses registers: r4 - SDC base address (not changed)
+ * r9 - SDC clocking period in nSec
+ * Changes registers: r3,r5,r6,r7,r8,r10,r11
+ */
+
+tsi108_sdram_spd:
+
+ li r10,SPD_DIMM0
+ xor r11,r11,r11 /* DIMM Base Address: starts from 0 */
+
+do_first_dimm:
+
+ /* Program Refresh Rate Register */
+
+ READ_SPD(12) /* get Refresh Rate */
+ beq check_next_slot
+ li r5, ERR_RFRSH_RATE
+ cmpi 0,0,r3,SPD_MIN_RFRSH
+ ble spd_fail
+ cmpi 0,0,r3,SPD_MAX_RFRSH
+ bgt spd_fail
+ addi r3,r3,-SPD_MIN_RFRSH
+ rlwinm r3,r3,2,0,31
+ lis r5,refresh_rates@h
+ ori r5,r5,refresh_rates@l
+ lwzx r5,r5,r3 /* get refresh rate in nSec */
+ divwu r5,r5,r9 /* calculate # of SDC clocks */
+ stw r5,SD_REFRESH(r4) /* Set refresh rate */
+ sync
+
+ /* Program SD Timing Register */
+
+ li r7, 0 /* clear r7 prior parameter collection */
+
+ READ_SPD(20) /* get DIMM type: Registered or Unbuffered */
+ beq spd_read_fail
+ li r5, ERR_DIMM_TYPE
+ cmpi 0,0,r3,SPD_UDIMM
+ beq do_cl
+ cmpi 0,0,r3,SPD_RDIMM
+ bne spd_fail
+ oris r7,r7,0x1000 /* set SD_TIMING[DIMM_TYPE] bit */
+
+do_cl:
+ READ_SPD(18) /* Get CAS Latency */
+ beq spd_read_fail
+ li r5,ERR_CL_VALUE
+ andi. r6,r3,SPD_CAS_3
+ beq cl_4
+ li r6,3
+ b set_cl
+cl_4:
+ andi. r6,r3,SPD_CAS_4
+ beq cl_5
+ li r6,4
+ b set_cl
+cl_5:
+ andi. r6,r3,SPD_CAS_5
+ beq spd_fail
+ li r6,5
+set_cl:
+ rlwimi r7,r6,24,5,7
+
+ READ_SPD(30) /* Get tRAS */
+ beq spd_read_fail
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
+ beq set_tras
+ addi r6,r6,1
+set_tras:
+ li r5,ERR_TRAS_FAIL
+ cmpi 0,0,r6,0x0F /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,16,12,15
+
+ READ_SPD(29) /* Get tRCD */
+ beq spd_read_fail
+ /* right shift tRCD by 2 bits as per DDR2 spec */
+ rlwinm r3,r3,30,2,31
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
+ beq set_trcd
+ addi r6,r6,1
+set_trcd:
+ li r5,ERR_TRCD_FAIL
+ cmpi 0,0,r6,0x07 /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,12,17,19
+
+ READ_SPD(27) /* Get tRP value */
+ beq spd_read_fail
+ rlwinm r3,r3,30,2,31 /* right shift tRP by 2 bits as per DDR2 spec */
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
+ beq set_trp
+ addi r6,r6,1
+set_trp:
+ li r5,ERR_TRP_FAIL
+ cmpi 0,0,r6,0x07 /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,8,21,23
+
+ READ_SPD(36) /* Get tWR value */
+ beq spd_read_fail
+ rlwinm r3,r3,30,2,31 /* right shift tWR by 2 bits as per DDR2 spec */
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
+ beq set_twr
+ addi r6,r6,1
+set_twr:
+ addi r6,r6,-1 /* Tsi108 SDC always gives one extra clock */
+ li r5,ERR_TWR_FAIL
+ cmpi 0,0,r6,0x07 /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,5,24,26
+
+ READ_SPD(42) /* Get tRFC */
+ beq spd_read_fail
+ li r5, ERR_TRFC_FAIL
+ /* Tsi108 spec: tRFC=(tRFC + 1)/2 */
+ addi r3,r3,1
+ rlwinm. r3,r3,31,1,31 /* divide by 2 */
+ beq spd_fail
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
+ beq set_trfc
+ addi r6,r6,1
+set_trfc:
+ cmpi 0,0,r6,0x1F /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,0,27,31
+
+ stw r7,SD_TIMING(r4)
+ sync
+
+ /*
+ * The following two registers are set on per-DIMM basis.
+ * The SD_REFRESH and SD_TIMING settings are common for both DIMMS
+ */
+
+do_each_dimm:
+
+ /* Program SDRAM DIMM Control Register */
+
+ li r7, 0 /* clear r7 prior parameter collection */
+
+ READ_SPD(13) /* Get Primary SDRAM Width */
+ beq spd_read_fail
+ cmpi 0,0,r3,4 /* Check for 4-bit SDRAM */
+ beq do_nbank
+ oris r7,r7,0x0010 /* Set MEM_WIDTH bit */
+
+do_nbank:
+ READ_SPD(17) /* Get Number of banks on SDRAM device */
+ beq spd_read_fail
+ /* Grendel only distinguish betw. 4 or 8-bank memory parts */
+ li r5,ERR_UNKNOWN_PART /* non-supported memory part */
+ cmpi 0,0,r3,4
+ beq do_nrank
+ cmpi 0,0,r3,8
+ bne spd_fail
+ ori r7,r7,0x1000
+
+do_nrank:
+ READ_SPD(5) /* Get # of Ranks */
+ beq spd_read_fail
+ li r5,ERR_NRANK_INVALID
+ andi. r6,r3,0x7 /* Use bits [2..0] only */
+ beq do_addr_mode
+ cmpi 0,0,r6,1
+ bgt spd_fail
+ rlwimi r7,r6,8,23,23
+
+do_addr_mode:
+ READ_SPD(4) /* Get # of Column Addresses */
+ beq spd_read_fail
+ li r5, ERR_ADDR_MODE
+ andi. r3,r3,0x0f /* cut off reserved bits */
+ cmpi 0,0,r3,8
+ ble spd_fail
+ cmpi 0,0,r3,15
+ bgt spd_fail
+ addi r6,r3,-8 /* calculate ADDR_MODE parameter */
+ rlwimi r7,r6,4,24,27 /* set ADDR_MODE field */
+
+set_dimm_ctrl:
+#ifdef SDC_AUTOPRECH_EN
+ oris r7,r7,0x0001 /* set auto precharge EN bit */
+#endif
+ ori r7,r7,1 /* set ENABLE bit */
+ cmpi 0,0,r10,SPD_DIMM0
+ bne 1f
+ stw r7,SD_D0_CTRL(r4)
+ sync
+ b set_dimm_bar
+1:
+ stw r7,SD_D1_CTRL(r4)
+ sync
+
+
+ /* Program SDRAM DIMMx Base Address Register */
+
+set_dimm_bar:
+ READ_SPD(5) /* get # of Ranks */
+ beq spd_read_fail
+ andi. r7,r3,0x7
+ addi r7,r7,1
+ READ_SPD(31) /* Read DIMM rank density */
+ beq spd_read_fail
+ rlwinm r5,r3,27,29,31
+ rlwinm r6,r3,3,24,28
+ or r5,r6,r5 /* r5 = Normalized Rank Density byte */
+ lis r8, 0x0080 /* 128MB >> 4 */
+ mullw r8,r8,r5 /* r8 = (rank_size >> 4) */
+ mullw r8,r8,r7 /* r8 = (DIMM_size >> 4) */
+ neg r7,r8
+ rlwinm r7,r7,28,4,31
+ or r7,r7,r11 /* set ADDR field */
+ rlwinm r8,r8,12,20,31
+ add r11,r11,r8 /* set Base Addr for next DIMM */
+
+ cmpi 0,0,r10,SPD_DIMM0
+ bne set_dimm1_size
+ stw r7,SD_D0_BAR(r4)
+ sync
+ li r10,SPD_DIMM1
+ READ_SPD(0)
+ bne do_each_dimm
+ b spd_done
+
+set_dimm1_size:
+ stw r7,SD_D1_BAR(r4)
+ sync
+spd_done:
+ blr
+
+check_next_slot:
+ cmpi 0,0,r10,SPD_DIMM1
+ beq spd_read_fail
+ li r10,SPD_DIMM1
+ b do_first_dimm
+spd_read_fail:
+ ori r3,r0,0xdead
+ b err_hung
+spd_fail:
+ li r3,0x0bad
+ sync
+err_hung: /* hang here for debugging */
+ nop
+ nop
+ b err_hung
+
+#endif /* !SDC_HARDCODED_INIT */
diff --git a/board/mpc7448hpc2/config.mk b/board/mpc7448hpc2/config.mk
new file mode 100644
index 0000000..2e58858
--- /dev/null
+++ b/board/mpc7448hpc2/config.mk
@@ -0,0 +1,28 @@
+#
+# Copyright (c) 2005 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# Flash address
+TEXT_BASE = 0xFF000000
+# RAM address
+#TEXT_BASE = 0x00400000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -maltivec -mabi=altivec -msoft-float
diff --git a/board/mpc7448hpc2/mpc7448hpc2.c b/board/mpc7448hpc2/mpc7448hpc2.c
new file mode 100644
index 0000000..63c99de
--- /dev/null
+++ b/board/mpc7448hpc2/mpc7448hpc2.c
@@ -0,0 +1,107 @@
+/*
+ * (C) Copyright 2005 Freescale Semiconductor, Inc.
+ *
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * modifications for the Tsi108 Emul Board by avb@Tundra
+ */
+
+/*
+ * board support/init functions for the
+ * Freescale MPC7448 HPC2 (High-Performance Computing 2 Platform).
+ */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+extern void ft_cpu_setup (void *blob, bd_t *bd);
+#endif
+
+#undef DEBUG
+
+extern void flush_data_cache (void);
+extern void invalidate_l1_instruction_cache (void);
+extern void tsi108_init_f (void);
+
+int display_mem_map (void);
+
+void after_reloc (ulong dest_addr)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*
+ * Jump to the main U-Boot board init code
+ */
+ board_init_r ((gd_t *) gd, dest_addr);
+ /* NOTREACHED */
+}
+
+/*
+ * Check Board Identity:
+ * report board type
+ */
+
+int checkboard (void)
+{
+ int l_type = 0;
+
+ printf ("BOARD: %s\n", CFG_BOARD_NAME);
+ return (l_type);
+}
+
+/*
+ * Read Processor ID:
+ *
+ * report calling processor number
+ */
+
+int read_pid (void)
+{
+ return 0; /* we are on single CPU platform for a while */
+}
+
+long int dram_size (int board_type)
+{
+ return 0x20000000; /* 256M bytes */
+}
+
+long int initdram (int board_type)
+{
+ return dram_size (board_type);
+}
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup (void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ ft_cpu_setup (blob, bd);
+
+ p = ft_get_prop (blob, "/memory/reg", &len);
+ if (p != NULL) {
+ *p++ = cpu_to_be32 (bd->bi_memstart);
+ *p = cpu_to_be32 (bd->bi_memsize);
+ }
+}
+#endif
diff --git a/board/mpc7448hpc2/tsi108_init.c b/board/mpc7448hpc2/tsi108_init.c
new file mode 100644
index 0000000..8a7efef
--- /dev/null
+++ b/board/mpc7448hpc2/tsi108_init.c
@@ -0,0 +1,665 @@
+/*****************************************************************************
+ * (C) Copyright 2003; Tundra Semiconductor Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *****************************************************************************/
+
+/*----------------------------------------------------------------------------
+ * FILENAME: tsi108_init.c
+ *
+ * Originator: Alex Bounine
+ *
+ * DESCRIPTION:
+ * Initialization code for the Tundra Tsi108 bridge chip
+ *---------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+#include <tsi108.h>
+
+extern void mpicInit (int verbose);
+
+/*
+ * Configuration Options
+ */
+
+typedef struct {
+ ulong upper;
+ ulong lower;
+} PB2OCN_LUT_ENTRY;
+
+PB2OCN_LUT_ENTRY pb2ocn_lut1[32] = {
+ /* 0 - 7 */
+ {0x00000000, 0x00000201}, /* PBA=0xE000_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE100_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE200_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE300_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE400_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE500_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE600_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE700_0000 -> PCI/X (Byte-Swap) */
+
+ /* 8 - 15 */
+ {0x00000000, 0x00000201}, /* PBA=0xE800_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE900_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xEA00_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xEB00_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xEC00_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xED00_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xEE00_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xEF00_0000 -> PCI/X (Byte-Swap) */
+
+ /* 16 - 23 */
+ {0x00000000, 0x00000201}, /* PBA=0xF000_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF100_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF200_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF300_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF400_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF500_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF600_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF700_0000 -> PCI/X (Byte-Swap) */
+ /* 24 - 31 */
+ {0x00000000, 0x00000201}, /* PBA=0xF800_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF900_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xFA00_0000 -> PCI/X PCI I/O (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xFB00_0000 -> PCI/X PCI Config (Byte-Swap) */
+
+ {0x00000000, 0x02000240}, /* PBA=0xFC00_0000 -> HLP */
+ {0x00000000, 0x01000240}, /* PBA=0xFD00_0000 -> HLP */
+ {0x00000000, 0x03000240}, /* PBA=0xFE00_0000 -> HLP */
+ {0x00000000, 0x00000240} /* PBA=0xFF00_0000 -> HLP : (Translation Enabled + Byte-Swap)*/
+};
+
+#ifdef CFG_CLK_SPREAD
+typedef struct {
+ ulong ctrl0;
+ ulong ctrl1;
+} PLL_CTRL_SET;
+
+/*
+ * Clock Generator SPLL0 initialization values
+ * PLL0 configuration table for various PB_CLKO freq.
+ * Uses pre-calculated values for Fs = 30 kHz, D = 0.5%
+ * Fout depends on required PB_CLKO. Based on Fref = 33 MHz
+ */
+
+static PLL_CTRL_SET pll0_config[8] = {
+ {0x00000000, 0x00000000}, /* 0: bypass */
+ {0x00000000, 0x00000000}, /* 1: reserved */
+ {0x00430044, 0x00000043}, /* 2: CG_PB_CLKO = 183 MHz */
+ {0x005c0044, 0x00000039}, /* 3: CG_PB_CLKO = 100 MHz */
+ {0x005c0044, 0x00000039}, /* 4: CG_PB_CLKO = 133 MHz */
+ {0x004a0044, 0x00000040}, /* 5: CG_PB_CLKO = 167 MHz */
+ {0x005c0044, 0x00000039}, /* 6: CG_PB_CLKO = 200 MHz */
+ {0x004f0044, 0x0000003e} /* 7: CG_PB_CLKO = 233 MHz */
+};
+#endif /* CFG_CLK_SPREAD */
+
+/*
+ * Prosessor Bus Clock (in MHz) defined by CG_PB_SELECT
+ * (based on recommended Tsi108 reference clock 33MHz)
+ */
+static int pb_clk_sel[8] = { 0, 0, 183, 100, 133, 167, 200, 233 };
+
+/*
+ * get_board_bus_clk ()
+ *
+ * returns the bus clock in Hz.
+ */
+unsigned long get_board_bus_clk (void)
+{
+ ulong i;
+
+ /* Detect PB clock freq. */
+ i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
+ i = (i >> 16) & 0x07; /* Get PB PLL multiplier */
+
+ return pb_clk_sel[i] * 1000000;
+}
+
+/*
+ * board_early_init_f ()
+ *
+ * board-specific initialization executed from flash
+ */
+
+int board_early_init_f (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ ulong i;
+
+ gd->mem_clk = 0;
+ i = in32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET +
+ CG_PWRUP_STATUS);
+ i = (i >> 20) & 0x07; /* Get GD PLL multiplier */
+ switch (i) {
+ case 0: /* external clock */
+ printf ("Using external clock\n");
+ break;
+ case 1: /* system clock */
+ gd->mem_clk = gd->bus_clk;
+ break;
+ case 4: /* 133 MHz */
+ case 5: /* 166 MHz */
+ case 6: /* 200 MHz */
+ gd->mem_clk = pb_clk_sel[i] * 1000000;
+ break;
+ default:
+ printf ("Invalid DDR2 clock setting\n");
+ return -1;
+ }
+ printf ("BUS: %d MHz\n", get_board_bus_clk() / 1000000);
+ printf ("MEM: %d MHz\n", gd->mem_clk / 1000000);
+ return 0;
+}
+
+/*
+ * board_early_init_r() - Tsi108 initialization function executed right after
+ * relocation. Contains code that cannot be executed from flash.
+ */
+
+int board_early_init_r (void)
+{
+ ulong temp, i;
+ ulong reg_val;
+ volatile ulong *reg_ptr;
+
+ reg_ptr =
+ (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900);
+
+ for (i = 0; i < 32; i++) {
+ *reg_ptr++ = 0x00000201; /* SWAP ENABLED */
+ *reg_ptr++ = 0x00;
+ }
+
+ __asm__ __volatile__ ("eieio");
+ __asm__ __volatile__ ("sync");
+
+ /* Setup PB_OCN_BAR2: size 256B + ENable @ 0x0_80000000 */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2,
+ 0x80000001);
+ __asm__ __volatile__ ("sync");
+
+ /* Make sure that OCN_BAR2 decoder is set (to allow following immediate
+ * read from SDRAM)
+ */
+
+ temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2);
+ __asm__ __volatile__ ("sync");
+
+ /*
+ * Remap PB_OCN_BAR1 to accomodate PCI-bus aperture and EPROM into the
+ * processor bus address space. Immediately after reset LUT and address
+ * translation are disabled for this BAR. Now we have to initialize LUT
+ * and switch from the BOOT mode to the normal operation mode.
+ *
+ * The aperture defined by PB_OCN_BAR1 startes at address 0xE0000000
+ * and covers 512MB of address space. To allow larger aperture we also
+ * have to relocate register window of Tsi108
+ *
+ * Initialize LUT (32-entries) prior switching PB_OCN_BAR1 from BOOT
+ * mode.
+ *
+ * initialize pointer to LUT associated with PB_OCN_BAR1
+ */
+ reg_ptr =
+ (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800);
+
+ for (i = 0; i < 32; i++) {
+ *reg_ptr++ = pb2ocn_lut1[i].lower;
+ *reg_ptr++ = pb2ocn_lut1[i].upper;
+ }
+
+ __asm__ __volatile__ ("sync");
+
+ /* Base addresses for CS0, CS1, CS2, CS3 */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR,
+ 0x00000000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR,
+ 0x00100000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR,
+ 0x00200000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR,
+ 0x00300000);
+ __asm__ __volatile__ ("sync");
+
+ /* Masks for HLP banks */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK,
+ 0xFFF00000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK,
+ 0xFFF00000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK,
+ 0xFFF00000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK,
+ 0xFFF00000);
+ __asm__ __volatile__ ("sync");
+
+ /* Set CTRL0 values for banks */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0,
+ 0x7FFC44C2);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0,
+ 0x7FFC44C0);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0,
+ 0x7FFC44C0);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0,
+ 0x7FFC44C2);
+ __asm__ __volatile__ ("sync");
+
+ /* Set banks to latched mode, enabled, and other default settings */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1,
+ 0x7C0F2000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1,
+ 0x7C0F2000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1,
+ 0x7C0F2000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1,
+ 0x7C0F2000);
+ __asm__ __volatile__ ("sync");
+
+ /*
+ * Set new value for PB_OCN_BAR1: switch from BOOT to LUT mode.
+ * value for PB_OCN_BAR1: (BA-0xE000_0000 + size 512MB + ENable)
+ */
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1,
+ 0xE0000011);
+ __asm__ __volatile__ ("sync");
+
+ /* Make sure that OCN_BAR2 decoder is set (to allow following
+ * immediate read from SDRAM)
+ */
+
+ temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1);
+ __asm__ __volatile__ ("sync");
+
+ /*
+ * SRI: At this point we have enabled the HLP banks. That means we can
+ * now read from the NVRAM and initialize the environment variables.
+ * We will over-ride the env_init called in board_init_f
+ * This is really a work-around because, the HLP bank 1
+ * where NVRAM resides is not visible during board_init_f
+ * (lib_ppc/board.c)
+ * Alternatively, we could use the I2C EEPROM at start-up to configure
+ * and enable all HLP banks and not just HLP 0 as is being done for
+ * Taiga Rev. 2.
+ */
+
+ env_init ();
+
+#ifndef DISABLE_PBM
+
+ /*
+ * For IBM processors we have to set Address-Only commands generated
+ * by PBM that are different from ones set after reset.
+ */
+
+ temp = get_cpu_type ();
+
+ if ((CPU_750FX == temp) || (CPU_750GX == temp))
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD,
+ 0x00009955);
+#endif /* DISABLE_PBM */
+
+#ifdef CONFIG_PCI
+ /*
+ * Initialize PCI/X block
+ */
+
+ /* Map PCI/X Configuration Space (16MB @ 0x0_FE000000) */
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
+ PCI_PFAB_BAR0_UPPER, 0);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0,
+ 0xFB000001);
+ __asm__ __volatile__ ("sync");
+
+ /* Set Bus Number for the attached PCI/X bus (we will use 0 for NB) */
+
+ temp = in32(CFG_TSI108_CSR_BASE +
+ TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT);
+
+ temp &= ~0xFF00; /* Clear the BUS_NUM field */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT,
+ temp);
+
+ /* Map PCI/X IO Space (64KB @ 0x0_FD000000) takes one 16MB LUT entry */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER,
+ 0);
+ __asm__ __volatile__ ("sync");
+
+ /* This register is on the PCI side to interpret the address it receives
+ * and maps it as a IO address.
+ */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO,
+ 0xFA000001);
+ __asm__ __volatile__ ("sync");
+
+ /*
+ * Map PCI/X Memory Space
+ *
+ * Transactions directed from OCM to PCI Memory Space are directed
+ * from PB to PCI
+ * unchanged (as defined by PB_OCN_BAR1,2 and LUT settings).
+ * If address remapping is required the corresponding PCI_PFAB_MEM32
+ * and PCI_PFAB_PFMx register groups have to be configured.
+ *
+ * Map the path from the PCI/X bus into the system memory
+ *
+ * The memory mapped window assotiated with PCI P2O_BAR2 provides
+ * access to the system memory without address remapping.
+ * All system memory is opened for accesses initiated by PCI/X bus
+ * masters.
+ *
+ * Initialize LUT associated with PCI P2O_BAR2
+ *
+ * set pointer to LUT associated with PCI P2O_BAR2
+ */
+
+ reg_ptr =
+ (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500);
+
+#ifdef DISABLE_PBM
+
+ /* In case when PBM is disabled (no HW supported cache snoopng on PB)
+ * P2O_BAR2 is directly mapped into the system memory without address
+ * translation.
+ */
+
+ reg_val = 0x00000004; /* SDRAM port + NO Addr_Translation */
+
+ for (i = 0; i < 32; i++) {
+ *reg_ptr++ = reg_val; /* P2O_BAR2_LUTx */
+ *reg_ptr++ = 0; /* P2O_BAR2_LUT_UPPERx */
+ }
+
+ /* value for PCI BAR2 (size = 512MB, Enabled, No Addr. Translation) */
+ reg_val = 0x00007500;
+#else
+
+ reg_val = 0x00000002; /* Destination port = PBM */
+
+ for (i = 0; i < 32; i++) {
+ *reg_ptr++ = reg_val; /* P2O_BAR2_LUTx */
+/* P2O_BAR2_LUT_UPPERx : Set data swapping mode for PBM (byte swapping) */
+ *reg_ptr++ = 0x40000000;
+/* offset = 16MB, address translation is enabled to allow byte swapping */
+ reg_val += 0x01000000;
+ }
+
+/* value for PCI BAR2 (size = 512MB, Enabled, Address Translation Enabled) */
+ reg_val = 0x00007100;
+#endif
+
+ __asm__ __volatile__ ("eieio");
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+ reg_val);
+ __asm__ __volatile__ ("sync");
+
+ /* Set 64-bit PCI bus address for system memory
+ * ( 0 is the best choice for easy mapping)
+ */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2,
+ 0x00000000);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER,
+ 0x00000000);
+ __asm__ __volatile__ ("sync");
+
+#ifndef DISABLE_PBM
+ /*
+ * The memory mapped window assotiated with PCI P2O_BAR3 provides
+ * access to the system memory using SDRAM OCN port and address
+ * translation. This is alternative way to access SDRAM from PCI
+ * required for Tsi108 emulation testing.
+ * All system memory is opened for accesses initiated by
+ * PCI/X bus masters.
+ *
+ * Initialize LUT associated with PCI P2O_BAR3
+ *
+ * set pointer to LUT associated with PCI P2O_BAR3
+ */
+ reg_ptr =
+ (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600);
+
+ reg_val = 0x00000004; /* Destination port = SDC */
+
+ for (i = 0; i < 32; i++) {
+ *reg_ptr++ = reg_val; /* P2O_BAR3_LUTx */
+
+/* P2O_BAR3_LUT_UPPERx : Set data swapping mode for PBM (byte swapping) */
+ *reg_ptr++ = 0;
+
+/* offset = 16MB, address translation is enabled to allow byte swapping */
+ reg_val += 0x01000000;
+ }
+
+ __asm__ __volatile__ ("eieio");
+ __asm__ __volatile__ ("sync");
+
+ /* Configure PCI P2O_BAR3 (size = 512MB, Enabled) */
+
+ reg_val =
+ in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
+ PCI_P2O_PAGE_SIZES);
+ reg_val &= ~0x00FF;
+ reg_val |= 0x0071;
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+ reg_val);
+ __asm__ __volatile__ ("sync");
+
+ /* Set 64-bit base PCI bus address for window (0x20000000) */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER,
+ 0x00000000);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3,
+ 0x20000000);
+ __asm__ __volatile__ ("sync");
+
+#endif /* !DISABLE_PBM */
+
+#ifdef ENABLE_PCI_CSR_BAR
+ /* open if required access to Tsi108 CSRs from the PCI/X bus */
+ /* enable BAR0 on the PCI/X bus */
+ reg_val = in32(CFG_TSI108_CSR_BASE +
+ TSI108_PCI_REG_OFFSET + PCI_MISC_CSR);
+ reg_val |= 0x02;
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR,
+ reg_val);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER,
+ 0x00000000);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0,
+ CFG_TSI108_CSR_BASE);
+ __asm__ __volatile__ ("sync");
+
+#endif
+
+ /*
+ * Finally enable PCI/X Bus Master and Memory Space access
+ */
+
+ reg_val = in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR);
+ reg_val |= 0x06;
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val);
+ __asm__ __volatile__ ("sync");
+
+#endif /* CONFIG_PCI */
+
+ /*
+ * Initialize MPIC outputs (interrupt pins):
+ * Interrupt routing on the Grendel Emul. Board:
+ * PB_INT[0] -> INT (CPU0)
+ * PB_INT[1] -> INT (CPU1)
+ * PB_INT[2] -> MCP (CPU0)
+ * PB_INT[3] -> MCP (CPU1)
+ * Set interrupt controller outputs as Level_Sensitive/Active_Low
+ */
+ out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02);
+ __asm__ __volatile__ ("sync");
+
+ /*
+ * Ensure that Machine Check exception is enabled
+ * We need it to support PCI Bus probing (configuration reads)
+ */
+
+ reg_val = mfmsr ();
+ mtmsr(reg_val | MSR_ME);
+
+ return 0;
+}
+
+/*
+ * Needed to print out L2 cache info
+ * used in the misc_init_r function
+ */
+
+unsigned long get_l2cr (void)
+{
+ unsigned long l2controlreg;
+ asm volatile ("mfspr %0, 1017":"=r" (l2controlreg):);
+ return l2controlreg;
+}
+
+/*
+ * misc_init_r()
+ *
+ * various things to do after relocation
+ *
+ */
+
+int misc_init_r (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+#ifdef CFG_CLK_SPREAD /* Initialize Spread-Spectrum Clock generation */
+ ulong i;
+
+ /* Ensure that Spread-Spectrum is disabled */
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0);
+
+ /* Initialize PLL1: CG_PCI_CLK , internal OCN_CLK
+ * Uses pre-calculated value for Fout = 800 MHz, Fs = 30 kHz, D = 0.5%
+ */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
+ 0x002e0044); /* D = 0.25% */
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1,
+ 0x00000039); /* BWADJ */
+
+ /* Initialize PLL0: CG_PB_CLKO */
+ /* Detect PB clock freq. */
+ i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
+ i = (i >> 16) & 0x07; /* Get PB PLL multiplier */
+
+ out32 (CFG_TSI108_CSR_BASE +
+ TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0);
+ out32 (CFG_TSI108_CSR_BASE +
+ TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1);
+
+ /* Wait and set SSEN for both PLL0 and 1 */
+ udelay (1000);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
+ 0x802e0044); /* D=0.25% */
+ out32 (CFG_TSI108_CSR_BASE +
+ TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0,
+ 0x80000000 | pll0_config[i].ctrl0);
+#endif /* CFG_CLK_SPREAD */
+
+#ifdef CFG_L2
+ l2cache_enable ();
+#endif
+ printf ("BUS: %d MHz\n", gd->bus_clk / 1000000);
+ printf ("MEM: %d MHz\n", gd->mem_clk / 1000000);
+
+ /*
+ * All the information needed to print the cache details is avaiblable
+ * at this point i.e. above call to l2cache_enable is the very last
+ * thing done with regards to enabling diabling the cache.
+ * So this seems like a good place to print all this information
+ */
+
+ printf ("CACHE: ");
+ switch (get_cpu_type()) {
+ case CPU_7447A:
+ printf ("L1 Instruction cache - 32KB 8-way");
+ (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("L1 Data cache - 32KB 8-way");
+ (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("Unified L2 cache - 512KB 8-way");
+ (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("\n");
+ break;
+
+ case CPU_7448:
+ printf ("L1 Instruction cache - 32KB 8-way");
+ (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("L1 Data cache - 32KB 8-way");
+ (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("Unified L2 cache - 1MB 8-way");
+ (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
diff --git a/board/mpc7448hpc2/u-boot.lds b/board/mpc7448hpc2/u-boot.lds
new file mode 100644
index 0000000..8f24213
--- /dev/null
+++ b/board/mpc7448hpc2/u-boot.lds
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * u-boot.lds - linker script for U-Boot on mpc7448hpc2 Board.
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/74xx_7xx/start.o (.text)
+
+/* store the environment in a seperate sector in the boot flash */
+/* . = env_offset; */
+/* common/environment.o(.text) */
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/mpc8313erdb/Makefile b/board/mpc8313erdb/Makefile
new file mode 100644
index 0000000..a987e510
--- /dev/null
+++ b/board/mpc8313erdb/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o sdram.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/mpc8313erdb/config.mk b/board/mpc8313erdb/config.mk
new file mode 100644
index 0000000..f768264
--- /dev/null
+++ b/board/mpc8313erdb/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0xFE000000
diff --git a/board/mpc8313erdb/mpc8313erdb.c b/board/mpc8313erdb/mpc8313erdb.c
new file mode 100644
index 0000000..999fe9e
--- /dev/null
+++ b/board/mpc8313erdb/mpc8313erdb.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006-2007
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ft_build.h>
+#include <pci.h>
+#include <mpc83xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+#ifndef CFG_8313ERDB_BROKEN_PMC
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
+
+ if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
+ gd->flags |= GD_FLG_SILENT;
+#endif
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: Freescale MPC8313ERDB\n");
+ return 0;
+}
+
+static struct pci_region pci_regions[] = {
+ {
+ bus_start: CFG_PCI1_MEM_BASE,
+ phys_start: CFG_PCI1_MEM_PHYS,
+ size: CFG_PCI1_MEM_SIZE,
+ flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+ },
+ {
+ bus_start: CFG_PCI1_MMIO_BASE,
+ phys_start: CFG_PCI1_MMIO_PHYS,
+ size: CFG_PCI1_MMIO_SIZE,
+ flags: PCI_REGION_MEM
+ },
+ {
+ bus_start: CFG_PCI1_IO_BASE,
+ phys_start: CFG_PCI1_IO_PHYS,
+ size: CFG_PCI1_IO_SIZE,
+ flags: PCI_REGION_IO
+ }
+};
+
+void pci_init_board(void)
+{
+ volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+ volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
+ volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+ struct pci_region *reg[] = { pci_regions };
+ int warmboot;
+
+ /* Enable all 3 PCI_CLK_OUTPUTs. */
+ clk->occr |= 0xe0000000;
+
+ /*
+ * Configure PCI Local Access Windows
+ */
+ pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
+
+ pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
+
+ warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM;
+#ifndef CFG_8313ERDB_BROKEN_PMC
+ warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF;
+#endif
+
+ mpc83xx_pci_init(1, reg, warmboot);
+}
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+ ft_cpu_setup(blob, bd);
+
+ p = ft_get_prop(blob, "/memory/reg", &len);
+ if (p) {
+ *p++ = cpu_to_be32(bd->bi_memstart);
+ *p = cpu_to_be32(bd->bi_memsize);
+ }
+}
+#endif
diff --git a/board/mpc8313erdb/sdram.c b/board/mpc8313erdb/sdram.c
new file mode 100644
index 0000000..4b67788
--- /dev/null
+++ b/board/mpc8313erdb/sdram.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006-2007
+ *
+ * Authors: Nick.Spence@freescale.com
+ * Wilson.Lo@freescale.com
+ * scottwood@freescale.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <spd_sdram.h>
+
+#include <asm/bitops.h>
+#include <asm/io.h>
+
+#include <asm/processor.h>
+
+#ifndef CFG_8313ERDB_BROKEN_PMC
+static void resume_from_sleep(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ u32 magic = *(u32 *)0;
+
+ typedef void (*func_t)(void);
+ func_t resume = *(func_t *)4;
+
+ if (magic == 0xf5153ae5)
+ resume();
+
+ gd->flags &= ~GD_FLG_SILENT;
+ puts("\nResume from sleep failed: bad magic word\n");
+}
+#endif
+
+/* Fixed sdram init -- doesn't use serial presence detect.
+ *
+ * This is useful for faster booting in configs where the RAM is unlikely
+ * to be changed, or for things like NAND booting where space is tight.
+ */
+static long fixed_sdram(void)
+{
+ volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+ u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+ u32 msize_log2 = __ilog2(msize);
+
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+ im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
+ im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+
+ /*
+ * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
+ * or the DDR2 controller may fail to initialize correctly.
+ */
+ udelay(50000);
+
+ im->ddr.csbnds[0].csbnds = (msize - 1) >> 24;
+ im->ddr.cs_config[0] = CFG_DDR_CONFIG;
+
+ /* Currently we use only one CS, so disable the other bank. */
+ im->ddr.cs_config[1] = 0;
+
+ im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+ im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
+ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+ im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+
+#ifndef CFG_8313ERDB_BROKEN_PMC
+ if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
+ im->ddr.sdram_cfg = CFG_SDRAM_CFG | SDRAM_CFG_BI;
+ else
+#endif
+ im->ddr.sdram_cfg = CFG_SDRAM_CFG;
+
+ im->ddr.sdram_cfg2 = CFG_SDRAM_CFG2;
+ im->ddr.sdram_mode = CFG_DDR_MODE;
+ im->ddr.sdram_mode2 = CFG_DDR_MODE_2;
+
+ im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ sync();
+
+ /* enable DDR controller */
+ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+
+ return msize;
+}
+
+long int initdram(int board_type)
+{
+ volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+ volatile lbus83xx_t *lbc = &im->lbus;
+ u32 msize;
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+ return -1;
+
+ puts("Initializing\n");
+
+ /* DDR SDRAM - Main SODIMM */
+ msize = fixed_sdram();
+
+ /* Local Bus setup lbcr and mrtpr */
+ lbc->lbcr = CFG_LBC_LBCR;
+ lbc->mrtpr = CFG_LBC_MRTPR;
+ sync();
+
+#ifndef CFG_8313ERDB_BROKEN_PMC
+ if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
+ resume_from_sleep();
+#endif
+
+ puts(" DDR RAM: ");
+ /* return total bus SDRAM size(bytes) -- DDR */
+ return msize;
+}
diff --git a/board/mpc8313erdb/u-boot.lds b/board/mpc8313erdb/u-boot.lds
new file mode 100644
index 0000000..937c87a
--- /dev/null
+++ b/board/mpc8313erdb/u-boot.lds
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc83xx/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c
index 2b3ded1..178b1d3 100644
--- a/board/mpc8349itx/mpc8349itx.c
+++ b/board/mpc8349itx/mpc8349itx.c
@@ -80,8 +80,7 @@
im->ddr.sdram_interval =
(0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 <<
SDRAM_INTERVAL_BSTOPRE_SHIFT);
- im->ddr.sdram_clk_cntl =
- DDR_SDRAM_CLK_CNTL_SS_EN | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05;
+ im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
udelay(200);
diff --git a/board/mpc8360emds/config.mk b/board/mpc8360emds/config.mk
index 5801a5f..9ace886 100644
--- a/board/mpc8360emds/config.mk
+++ b/board/mpc8360emds/config.mk
@@ -26,8 +26,3 @@
#
TEXT_BASE = 0xFE000000
-
-#
-# Additional board-specific libraries
-#
-BOARDLIBS = libfdt/libfdt.a
diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c
index deadb5f..562eb8b 100644
--- a/board/mpc8360emds/mpc8360emds.c
+++ b/board/mpc8360emds/mpc8360emds.c
@@ -664,19 +664,28 @@
#if (defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)) \
&& defined(CONFIG_OF_BOARD_SETUP)
+
+/*
+ * Prototypes of functions that we use.
+ */
+void ft_cpu_setup(void *blob, bd_t *bd);
+
+#ifdef CONFIG_PCI
+void ft_pci_setup(void *blob, bd_t *bd);
+#endif
+
void
ft_board_setup(void *blob, bd_t *bd)
{
#if defined(CONFIG_OF_LIBFDT)
int nodeoffset;
- int err;
int tmp[2];
nodeoffset = fdt_path_offset (fdt, "/memory");
if (nodeoffset >= 0) {
tmp[0] = cpu_to_be32(bd->bi_memstart);
tmp[1] = cpu_to_be32(bd->bi_memsize);
- err = fdt_setprop(fdt, nodeoffset, "reg", tmp, sizeof(tmp));
+ fdt_setprop(fdt, nodeoffset, "reg", tmp, sizeof(tmp));
}
#else
u32 *p;
@@ -694,4 +703,4 @@
#endif
ft_cpu_setup(blob, bd);
}
-#endif
+#endif /* CONFIG_OF_x */
diff --git a/board/mpc8540ads/init.S b/board/mpc8540ads/init.S
index 242cb9f..544fde9 100644
--- a/board/mpc8540ads/init.S
+++ b/board/mpc8540ads/init.S
@@ -260,8 +260,8 @@
#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
+#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_1M))
/*
* Rapid IO at 0xc000_0000 for 512 M
diff --git a/board/mpc8560ads/init.S b/board/mpc8560ads/init.S
index 242cb9f..544fde9 100644
--- a/board/mpc8560ads/init.S
+++ b/board/mpc8560ads/init.S
@@ -260,8 +260,8 @@
#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
+#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_1M))
/*
* Rapid IO at 0xc000_0000 for 512 M
diff --git a/board/mpc8568mds/Makefile b/board/mpc8568mds/Makefile
new file mode 100644
index 0000000..a799aa4
--- /dev/null
+++ b/board/mpc8568mds/Makefile
@@ -0,0 +1,58 @@
+#
+# Copyright 2004-2007 Freescale Semiconductor.
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o \
+ bcsr.o \
+ ft_board.o
+
+SOBJS := init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/mpc8568mds/bcsr.c b/board/mpc8568mds/bcsr.c
new file mode 100644
index 0000000..2e2e8cd
--- /dev/null
+++ b/board/mpc8568mds/bcsr.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "bcsr.h"
+
+void enable_8568mds_duart()
+{
+ volatile uint* duart_mux = (uint *)(CFG_CCSRBAR + 0xe0060);
+ volatile uint* devices = (uint *)(CFG_CCSRBAR + 0xe0070);
+ volatile u8 *bcsr = (u8 *)(CFG_BCSR);
+
+ *duart_mux = 0x80000000; /* Set the mux to Duart on PMUXCR */
+ *devices = 0; /* Enable all peripheral devices */
+ bcsr[5] |= 0x01; /* Enable Duart in BCSR*/
+}
+
+void enable_8568mds_flash_write()
+{
+ volatile u8 *bcsr = (u8 *)(CFG_BCSR);
+
+ bcsr[9] |= 0x01;
+}
+
+void disable_8568mds_flash_write()
+{
+ volatile u8 *bcsr = (u8 *)(CFG_BCSR);
+
+ bcsr[9] &= ~(0x01);
+}
diff --git a/board/mpc8568mds/bcsr.h b/board/mpc8568mds/bcsr.h
new file mode 100644
index 0000000..8d4cb2f
--- /dev/null
+++ b/board/mpc8568mds/bcsr.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __BCSR_H_
+#define __BCSR_H_
+
+#include <common.h>
+
+/* BCSR Bit definitions
+ * BCSR 0 *
+ 0:3 ccb sys pll
+ 4:6 cfg core pll
+ 7 cfg boot seq
+
+ * BCSR 1 *
+ 0:2 cfg rom lock
+ 3:5 cfg host agent
+ 6 PCI IO
+ 7 cfg RIO size
+
+ * BCSR 2 *
+ 0:4 QE PLL
+ 5 QE clock
+ 6 cfg PCI arbiter
+
+ * BCSR 3 *
+ 0 TSEC1 reduce
+ 1 TSEC2 reduce
+ 2:3 TSEC1 protocol
+ 4:5 TSEC2 protocol
+ 6 PHY1 slave
+ 7 PHY2 slave
+
+ * BCSR 4 *
+ 4 clock enable
+ 5 boot EPROM
+ 6 GETH transactive reset
+ 7 BRD write potect
+
+ * BCSR 5 *
+ 1:3 Leds 1-3
+ 4 UPC1 enable
+ 5 UPC2 enable
+ 6 UPC2 pos
+ 7 RS232 enable
+
+ * BCSR 6 *
+ 0 CFG ver 0
+ 1 CFG ver 1
+ 6 Register config led
+ 7 Power on reset
+
+ * BCSR 7 *
+ 2 board host mode indication
+ 5 enable TSEC1 PHY
+ 6 enable TSEC2 PHY
+
+ * BCSR 8 *
+ 0 UCC GETH1 enable
+ 1 UCC GMII enable
+ 3 UCC TBI enable
+ 5 UCC MII enable
+ 7 Real time clock reset
+
+ * BCSR 9 *
+ 0 UCC2 GETH enable
+ 1 UCC2 GMII enable
+ 3 UCC2 TBI enable
+ 5 UCC2 MII enable
+ 6 Ready only - indicate flash ready after burning
+ 7 Flash write protect
+*/
+
+/*BCSR Utils functions*/
+
+void enable_8568mds_duart(void);
+void enable_8568mds_flash_write(void);
+void disable_8568mds_flash_write(void);
+
+#endif /* __BCSR_H_ */
diff --git a/board/mpc8568mds/config.mk b/board/mpc8568mds/config.mk
new file mode 100644
index 0000000..021522c
--- /dev/null
+++ b/board/mpc8568mds/config.mk
@@ -0,0 +1,30 @@
+#
+# Copyright 2007 Freescale Semiconductor.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# mpc8568mds board
+#
+TEXT_BASE = 0xfff80000
+
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8568=1
diff --git a/board/mpc8568mds/ft_board.c b/board/mpc8568mds/ft_board.c
new file mode 100644
index 0000000..36815cc
--- /dev/null
+++ b/board/mpc8568mds/ft_board.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <ft_build.h>
+
+extern void ft_cpu_setup(void *blob, bd_t *bd);
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+ ft_cpu_setup(blob, bd);
+ p = ft_get_prop(blob, "/memory/reg", &len);
+ if (p != NULL) {
+ *p++ = cpu_to_be32(bd->bi_memstart);
+ *p = cpu_to_be32(bd->bi_memsize);
+ }
+}
+#endif /* CONFIG_OF_FLAT_TREE && CONFIG_OF_BOARD_SETUP */
diff --git a/board/mpc8568mds/init.S b/board/mpc8568mds/init.S
new file mode 100644
index 0000000..0d87982
--- /dev/null
+++ b/board/mpc8568mds/init.S
@@ -0,0 +1,258 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor.
+ * Copyright 2002,2003, Motorola Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+
+/*
+ * TLB0 and TLB1 Entries
+ *
+ * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
+ * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
+ * these TLB entries are established.
+ *
+ * The TLB entries for DDR are dynamically setup in spd_sdram()
+ * and use TLB1 Entries 8 through 15 as needed according to the
+ * size of DDR memory.
+ *
+ * MAS0: tlbsel, esel, nv
+ * MAS1: valid, iprot, tid, ts, tsize
+ * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
+ */
+#define entry_start \
+ mflr r1 ; \
+ bl 0f ;
+
+#define entry_end \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+
+ .section .bootpg, "ax"
+ .globl tlb1_entry
+tlb1_entry:
+ entry_start
+
+ /*
+ * Number of TLB0 and TLB1 entries in the following table
+ */
+ .long (2f-1f)/16
+
+1:
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+ /*
+ * TLB0 4K Non-cacheable, guarded
+ * 0xff700000 4K Initial CCSRBAR mapping
+ *
+ * This ends up at a TLB0 Index==0 entry, and must not collide
+ * with other TLB0 Entries.
+ */
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+#else
+#error("Update the number of table entries in tlb1_entry")
+#endif
+
+ /*
+ * TLB0 16K Cacheable, non-guarded
+ * 0xd001_0000 16K Temporary Global data for initialization
+ *
+ * Use four 4K TLB0 entries. These entries must be cacheable
+ * as they provide the bootstrap memory before the memory
+ * controler and real memory have been configured.
+ *
+ * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
+ * and must not collide with other TLB0 entries.
+ */
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR), 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR), 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ /* TLB 1 Initializations */
+ /*
+ * TLBe 0: 16M Non-cacheable, guarded
+ * 0xff000000 16M FLASH (upper half)
+ * Out of reset this entry is only 4K.
+ */
+ .long TLB1_MAS0(1, 0, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE + 0x1000000),
+ 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE + 0x1000000),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLBe 1: 16M Non-cacheable, guarded
+ * 0xfe000000 16M FLASH (lower half)
+ */
+ .long TLB1_MAS0(1, 1, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLBe 2: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM
+ */
+ .long TLB1_MAS0(1, 2, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLBe 3: 256M Non-cacheable, guarded
+ * 0xa0000000 256M PCIe Mem
+ */
+ .long TLB1_MAS0(1, 3, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PEX_MEM_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PEX_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLBe 4: Reserved for future usage
+ */
+
+ /*
+ * TLBe 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 8M PCI1 IO
+ * 0xe280_0000 8M PCIe IO
+ */
+ .long TLB1_MAS0(1, 5, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLBe 6: 64M Cacheable, non-guarded
+ * 0xf000_0000 64M LBC SDRAM
+ */
+ .long TLB1_MAS0(1, 6, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLBe 7: 256K Non-cacheable, guarded
+ * 0xf8000000 32K BCSR
+ * 0xf8008000 32K PIB (CS4)
+ * 0xf8010000 32K PIB (CS5)
+ */
+ .long TLB1_MAS0(1, 7, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_BCSR_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_BCSR_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+2:
+ entry_end
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ *0) 0x0000_0000 0x7fff_ffff DDR 2G
+ *1) 0x8000_0000 0x9fff_ffff PCI1 MEM 256MB
+ *2) 0xa000_0000 0xbfff_ffff PCIe MEM 256MB
+ *5) 0xc000_0000 0xdfff_ffff SRIO 256MB
+ *-) 0xe000_0000 0xe00f_ffff CCSR 1M
+ *3) 0xe200_0000 0xe27f_ffff PCI1 I/O 8M
+ *4) 0xe280_0000 0xe2ff_ffff PCIe I/0 8M
+ *6.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB
+ *6.b) 0xf800_0000 0xf800_7fff BCSR 32KB
+ *6.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB
+ *6.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB
+ *6.e) 0xfe00_0000 0xffff_ffff Flash 32MB
+ *
+ *Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ * The defines below are 1-off of the actual LAWAR0 usage.
+ * So LAWAR3 define uses the LAWAR4 register in the ECM.
+ */
+
+#define LAWBAR0 0
+#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+
+#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
+#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR2 ((CFG_PEX_MEM_BASE>>12) & 0xfffff)
+#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
+#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
+
+#define LAWBAR4 ((CFG_PEX_IO_PHYS>>12) & 0xfffff)
+#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_16M))
+
+
+#define LAWBAR5 ((CFG_SRIO_MEM_BASE>>12) & 0xfffff)
+#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+/* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */
+#define LAWBAR6 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+ .section .bootpg, "ax"
+ .globl law_entry
+
+law_entry:
+ entry_start
+ .long (4f-3f)/8
+3:
+ .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
+ .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5,LAWBAR6,LAWAR6
+4:
+ entry_end
diff --git a/board/mpc8568mds/mpc8568mds.c b/board/mpc8568mds/mpc8568mds.c
new file mode 100644
index 0000000..9c7960d
--- /dev/null
+++ b/board/mpc8568mds/mpc8568mds.c
@@ -0,0 +1,288 @@
+/*
+ * Copyright 2007 Freescale Semiconductor.
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <spd.h>
+
+#include "bcsr.h"
+
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+extern long int spd_sdram(void);
+
+void local_bus_init(void);
+void sdram_init(void);
+
+int board_early_init_f (void)
+{
+ /*
+ * Initialize local bus.
+ */
+ local_bus_init ();
+
+ enable_8568mds_duart();
+ enable_8568mds_flash_write();
+
+ return 0;
+}
+
+int checkboard (void)
+{
+ printf ("Board: 8568 MDS\n");
+
+ return 0;
+}
+
+long int
+initdram(int board_type)
+{
+ long dram_size = 0;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+
+ puts("Initializing\n");
+
+#if defined(CONFIG_DDR_DLL)
+ {
+ /*
+ * Work around to stabilize DDR DLL MSYNC_IN.
+ * Errata DDR9 seems to have been fixed.
+ * This is now the workaround for Errata DDR11:
+ * Override DLL = 1, Course Adj = 1, Tap Select = 0
+ */
+
+ volatile ccsr_gur_t *gur= &immap->im_gur;
+
+ gur->ddrdllcr = 0x81000000;
+ asm("sync;isync;msync");
+ udelay(200);
+ }
+#endif
+ dram_size = spd_sdram();
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /*
+ * Initialize and enable DDR ECC.
+ */
+ ddr_enable_ecc(dram_size);
+#endif
+ /*
+ * SDRAM Initialization
+ */
+ sdram_init();
+
+ puts(" DDR: ");
+ return dram_size;
+}
+
+/*
+ * Initialize Local Bus
+ */
+void
+local_bus_init(void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+
+ uint clkdiv;
+ uint lbc_hz;
+ sys_info_t sysinfo;
+
+ get_sys_info(&sysinfo);
+ clkdiv = (lbc->lcrr & 0x0f) * 2;
+ lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+
+ gur->lbiuiplldcr1 = 0x00078080;
+ if (clkdiv == 16) {
+ gur->lbiuiplldcr0 = 0x7c0f1bf0;
+ } else if (clkdiv == 8) {
+ gur->lbiuiplldcr0 = 0x6c0f1bf0;
+ } else if (clkdiv == 4) {
+ gur->lbiuiplldcr0 = 0x5c0f1bf0;
+ }
+
+ lbc->lcrr |= 0x00030000;
+
+ asm("sync;isync;msync");
+}
+
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+void
+sdram_init(void)
+{
+#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+
+ uint idx;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+ uint lsdmr_common;
+
+ puts(" SDRAM: ");
+
+ print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+ /*
+ * Setup SDRAM Base and Option Registers
+ */
+ lbc->or2 = CFG_OR2_PRELIM;
+ asm("msync");
+
+ lbc->br2 = CFG_BR2_PRELIM;
+ asm("msync");
+
+ lbc->lbcr = CFG_LBC_LBCR;
+ asm("msync");
+
+
+ lbc->lsrt = CFG_LBC_LSRT;
+ lbc->mrtpr = CFG_LBC_MRTPR;
+ asm("msync");
+
+ /*
+ * MPC8568 uses "new" 15-16 style addressing.
+ */
+ lsdmr_common = CFG_LBC_LSDMR_COMMON;
+ lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+
+ /*
+ * Issue PRECHARGE ALL command.
+ */
+ lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+ asm("sync;msync");
+ *sdram_addr = 0xff;
+ ppcDcbf((unsigned long) sdram_addr);
+ udelay(100);
+
+ /*
+ * Issue 8 AUTO REFRESH commands.
+ */
+ for (idx = 0; idx < 8; idx++) {
+ lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+ asm("sync;msync");
+ *sdram_addr = 0xff;
+ ppcDcbf((unsigned long) sdram_addr);
+ udelay(100);
+ }
+
+ /*
+ * Issue 8 MODE-set command.
+ */
+ lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+ asm("sync;msync");
+ *sdram_addr = 0xff;
+ ppcDcbf((unsigned long) sdram_addr);
+ udelay(100);
+
+ /*
+ * Issue NORMAL OP command.
+ */
+ lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+ asm("sync;msync");
+ *sdram_addr = 0xff;
+ ppcDcbf((unsigned long) sdram_addr);
+ udelay(200); /* Overkill. Must wait > 200 bus cycles */
+
+#endif /* enable SDRAM init */
+}
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+ uint *pstart = (uint *) CFG_MEMTEST_START;
+ uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *p;
+
+ printf("Testing DRAM from 0x%08x to 0x%08x\n",
+ CFG_MEMTEST_START,
+ CFG_MEMTEST_END);
+
+ printf("DRAM test phase 1:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test phase 2:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test passed.\n");
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_PCI)
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc8568mds_config_table[] = {
+ {
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ pci_cfgfunc_config_device,
+ {PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
+ },
+ {}
+};
+#endif
+
+static struct pci_controller hose[] = {
+#ifndef CONFIG_PCI_PNP
+ { config_table: pci_mpc8568mds_config_table,},
+#endif
+#ifdef CONFIG_MPC85XX_PCI2
+ {},
+#endif
+};
+
+#endif /* CONFIG_PCI */
+
+void
+pci_init_board(void)
+{
+#ifdef CONFIG_PCI
+ pci_mpc85xx_init(&hose);
+#endif
+}
diff --git a/board/mpc8568mds/u-boot.lds b/board/mpc8568mds/u-boot.lds
new file mode 100644
index 0000000..71099f6
--- /dev/null
+++ b/board/mpc8568mds/u-boot.lds
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+
+SECTIONS
+{
+ /* ELIOR - From RAM: From FLASH: 0xFFFFFFFC*/
+ .resetvec 0xFFFFFFFC:
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /*(ELIOR - From RAM: From FLASH: 0xFFFFF000*/
+ .bootpg 0xFFFFF000:
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ board/mpc8568mds/init.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc85xx/start.o (.text)
+ board/mpc8568mds/init.o (.text)
+ cpu/mpc85xx/traps.o (.text)
+ cpu/mpc85xx/interrupts.o (.text)
+ cpu/mpc85xx/cpu_init.o (.text)
+ cpu/mpc85xx/cpu.o (.text)
+ cpu/mpc85xx/speed.o (.text)
+ cpu/mpc85xx/pci.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/mpc8641hpcn/Makefile b/board/mpc8641hpcn/Makefile
index 4b68c36..9625211 100644
--- a/board/mpc8641hpcn/Makefile
+++ b/board/mpc8641hpcn/Makefile
@@ -25,7 +25,9 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o pixis.o sys_eeprom.o
+COBJS := $(BOARD).o sys_eeprom.o \
+ ../freescale/common/pixis.o
+
SOBJS := init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/mpc8641hpcn/init.S b/board/mpc8641hpcn/init.S
index 6b3e2d2..cb21ba6 100644
--- a/board/mpc8641hpcn/init.S
+++ b/board/mpc8641hpcn/init.S
@@ -59,7 +59,7 @@
#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
#define LAWBAR3 ((CFG_PCI2_MEM_BASE>>12) & 0xffffff)
-#define LAWAR3 (~LAWAR_EN & (LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)))
+#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
/*
* This is not so much the SDRAM map as it is the whole localbus map.
@@ -67,11 +67,11 @@
#define LAWBAR4 ((0xf8100000>>12) & 0xffffff)
#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_2M))
-#define LAWBAR5 ((CFG_PCI1_IO_BASE>>12) & 0xffffff)
+#define LAWBAR5 ((CFG_PCI1_IO_PHYS>>12) & 0xffffff)
#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
-#define LAWBAR6 ((CFG_PCI2_IO_BASE>>12) & 0xffffff)
-#define LAWAR6 (~LAWAR_EN &( LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M)))
+#define LAWBAR6 ((CFG_PCI2_IO_PHYS>>12) & 0xffffff)
+#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M))
#define LAWBAR7 ((0xfe000000 >>12) & 0xffffff)
#define LAWAR7 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_32M))
@@ -84,7 +84,7 @@
#define LAWAR8 ((LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN)
#endif
-#define LAWBAR9 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
+#define LAWBAR9 ((CFG_RIO_MEM_PHYS>>12) & 0xfffff)
#define LAWAR9 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
.section .bootpg, "ax"
diff --git a/board/mpc8641hpcn/mpc8641hpcn.c b/board/mpc8641hpcn/mpc8641hpcn.c
index b2cf4a9..7d7e2af 100644
--- a/board/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/mpc8641hpcn/mpc8641hpcn.c
@@ -1,9 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor.
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ * Copyright 2006, 2007 Freescale Semiconductor.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -25,18 +21,18 @@
*/
#include <common.h>
-#include <command.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_86xx.h>
#include <spd.h>
+#include <asm/io.h>
#if defined(CONFIG_OF_FLAT_TREE)
#include <ft_build.h>
extern void ft_cpu_setup(void *blob, bd_t *bd);
#endif
-#include "pixis.h"
+#include "../freescale/common/pixis.h"
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
@@ -258,109 +254,6 @@
#endif
-void
-mpc8641_reset_board(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- char cmd;
- ulong val;
- ulong corepll;
-
- /*
- * No args is a simple reset request.
- */
- if (argc <= 1) {
- out8(PIXIS_BASE + PIXIS_RST, 0);
- /* not reached */
- }
-
- cmd = argv[1][1];
- switch (cmd) {
- case 'f': /* reset with frequency changed */
- if (argc < 5)
- goto my_usage;
- read_from_px_regs(0);
-
- val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));
-
- corepll = strfractoint(argv[3]);
- val = val + set_px_corepll(corepll);
- val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
- if (val == 3) {
- puts("Setting registers VCFGEN0 and VCTL\n");
- read_from_px_regs(1);
- puts("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
- set_px_go();
- } else
- goto my_usage;
-
- while (1) ; /* Not reached */
-
- case 'l':
- if (argv[2][1] == 'f') {
- read_from_px_regs(0);
- read_from_px_regs_altbank(0);
- /* reset with frequency changed */
- val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));
-
- corepll = strfractoint(argv[4]);
- val = val + set_px_corepll(corepll);
- val = val + set_px_mpxpll(simple_strtoul(argv[5],
- NULL, 10));
- if (val == 3) {
- puts("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
- set_altbank();
- read_from_px_regs(1);
- read_from_px_regs_altbank(1);
- puts("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
- set_px_go_with_watchdog();
- } else
- goto my_usage;
-
- while (1) ; /* Not reached */
-
- } else if (argv[2][1] == 'd') {
- /*
- * Reset from alternate bank without changing
- * frequencies but with watchdog timer enabled.
- */
- read_from_px_regs(0);
- read_from_px_regs_altbank(0);
- puts("Setting registers VCFGEN1, VBOOT, and VCTL\n");
- set_altbank();
- read_from_px_regs_altbank(1);
- puts("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
- set_px_go_with_watchdog();
- while (1) ; /* Not reached */
-
- } else {
- /*
- * Reset from next bank without changing
- * frequency and without watchdog timer enabled.
- */
- read_from_px_regs(0);
- read_from_px_regs_altbank(0);
- if (argc > 2)
- goto my_usage;
- puts("Setting registers VCFGNE1, VBOOT, and VCTL\n");
- set_altbank();
- read_from_px_regs_altbank(1);
- puts("Resetting board to boot from the other bank....\n");
- set_px_go();
- }
-
- default:
- goto my_usage;
- }
-
-my_usage:
- puts("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
- puts(" reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
- puts(" reset altbank [wd]\n");
- puts("For example: reset cf 40 2.5 10\n");
- puts("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
-}
-
-
/*
* get_board_sys_clk
* Reads the FPGA on board for CONFIG_SYS_CLK_FREQ
diff --git a/board/nc650/config.mk b/board/nc650/config.mk
index 52c8ffe..9d9b892 100644
--- a/board/nc650/config.mk
+++ b/board/nc650/config.mk
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2006 Detlev Zundel, dzu@denx.de
+# (C) Copyright 2006, 2007 Detlev Zundel, dzu@denx.de
# (C) Copyright 2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
@@ -27,4 +27,3 @@
#
TEXT_BASE = 0x40700000
-BOARDLIBS = $(obj)drivers/nand/libnand.a
diff --git a/board/nc650/nc650.c b/board/nc650/nc650.c
index 8a6b5b0..707e4b9 100644
--- a/board/nc650/nc650.c
+++ b/board/nc650/nc650.c
@@ -177,16 +177,14 @@
*
* try 8 column mode
*/
- size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE3_PRELIM,
- SDRAM_MAX_SIZE);
+ size8 = dram_size (CFG_MAMR_8COL, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
udelay (1000);
/*
* try 9 column mode
*/
- size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE3_PRELIM,
- SDRAM_MAX_SIZE);
+ size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
udelay (1000);
diff --git a/board/prodrive/pdnb3/config.mk b/board/prodrive/pdnb3/config.mk
index 7670758..51dee86 100644
--- a/board/prodrive/pdnb3/config.mk
+++ b/board/prodrive/pdnb3/config.mk
@@ -1,4 +1,2 @@
+#
TEXT_BASE = 0x01f00000
-
-# include NPE ethernet driver
-BOARDLIBS = $(obj)cpu/ixp/npe/libnpe.a
diff --git a/board/stxssa/Makefile b/board/stxssa/Makefile
new file mode 100644
index 0000000..344ecdf
--- /dev/null
+++ b/board/stxssa/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+SOBJS := init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/stxssa/config.mk b/board/stxssa/config.mk
new file mode 100644
index 0000000..30f42c5
--- /dev/null
+++ b/board/stxssa/config.mk
@@ -0,0 +1,34 @@
+# Modified by Xianghua Xiao, X.Xiao@motorola.com
+# (C) Copyright 2002,2003 Motorola Inc.
+#
+# Copied from ADS85xx for STx GP3 - Dan Malek
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# default CCARBAR is at 0xff700000
+# assume U-Boot is less than 0.5MB
+# U-Boot is less than 256K, so push
+# it further up into the flash
+#
+TEXT_BASE = 0xfffC0000
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/board/stxssa/init.S b/board/stxssa/init.S
new file mode 100644
index 0000000..a1a8d9e
--- /dev/null
+++ b/board/stxssa/init.S
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc.
+ * Dan Malek <dan@embeddedalley.com>
+ * Copied from STx GP3.
+ * Updates for Silicon Tx GP3 SSA. We only support 32-bit flash
+ * and DDR with SPD EEPROM configuration.
+ *
+ * Copyright 2004 Freescale Semiconductor.
+ * Copyright (C) 2002,2003, Motorola Inc.
+ * Xianghua Xiao <X.Xiao@motorola.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+
+/*
+ * TLB0 and TLB1 Entries
+ *
+ * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
+ * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
+ * these TLB entries are established.
+ *
+ * The TLB entries for DDR are dynamically setup in spd_sdram()
+ * and use TLB1 Entries 8 through 15 as needed according to the
+ * size of DDR memory.
+ *
+ * MAS0: tlbsel, esel, nv
+ * MAS1: valid, iprot, tid, ts, tsize
+ * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
+ */
+
+#define entry_start \
+ mflr r1 ; \
+ bl 0f ;
+
+#define entry_end \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+
+ .section .bootpg, "ax"
+ .globl tlb1_entry
+tlb1_entry:
+ entry_start
+
+ /*
+ * Number of TLB0 and TLB1 entries in the following table
+ */
+ .long 12
+
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+ /*
+ * TLB0 4K Non-cacheable, guarded
+ * 0xff700000 4K Initial CCSRBAR mapping
+ *
+ * This ends up at a TLB0 Index==0 entry, and must not collide
+ * with other TLB0 Entries.
+ */
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+#else
+#error("Update the number of table entries in tlb1_entry")
+#endif
+
+ /*
+ * TLB0 16K Cacheable, non-guarded
+ * 0xd001_0000 16K Temporary Global data for initialization
+ *
+ * Use four 4K TLB0 entries. These entries must be cacheable
+ * as they provide the bootstrap memory before the memory
+ * controler and real memory have been configured.
+ *
+ * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
+ * and must not collide with other TLB0 entries.
+ */
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR), \
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR), \
+ 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024), \
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024), \
+ 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024), \
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024), \
+ 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024), \
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024), \
+ 0,0,0,0,0,1,0,1,0,1)
+
+
+ /*
+ * TLB 0: 64M Non-cacheable, guarded
+ * 0xfc000000 6M4 FLASH
+ * Out of reset this entry is only 4K.
+ */
+ .long TLB1_MAS0(1, 0, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 1: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ .long TLB1_MAS0(1, 1, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ .long TLB1_MAS0(1, 2, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000), \
+ 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000), \
+ 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ * 0xa0000000 256M PCI2 MEM First half
+ */
+ .long TLB1_MAS0(1, 3, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xb0000000 256M PCI2 MEM Second half
+ */
+ .long TLB1_MAS0(1, 4, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000), \
+ 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000), \
+ 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 16M PCI1 IO
+ * 0xe300_0000 16M PCI2 IO
+ */
+ .long TLB1_MAS0(1, 5, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 6: 256M Non-cacheable, guarded
+ * 0xf0000000 Local bus expansion option.
+ * 0xfb000000 Configuration Latch register (one word)
+ * 0xfc000000 Up to 64M flash
+ */
+ .long TLB1_MAS0(1, 7, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_OPTION_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_OPTION_BASE), 0,0,0,0,0,1,0,1,0,1)
+ entry_end
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M
+ * 0xf000_0000 0xfaff_ffff Local bus 128M
+ * 0xfb00_0000 0xfb00_ffff Config Latch 64K
+ * 0xfc00_0000 0xffff_ffff FLASH (boot bank) 64M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+#if !defined(CONFIG_SPD_EEPROM)
+#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
+#else
+#define LAWBAR0 0
+#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+#endif
+
+#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
+#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
+#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
+#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
+#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
+#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+
+#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
+#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+
+/* Map the whole localbus, including flash and reset latch.
+*/
+#define LAWBAR5 ((CFG_LBC_OPTION_BASE>>12) & 0xfffff)
+#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+
+ .section .bootpg, "ax"
+ .globl law_entry
+law_entry:
+ entry_start
+ .long 6
+ .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
+ .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
+ entry_end
diff --git a/board/stxssa/stxssa.c b/board/stxssa/stxssa.c
new file mode 100644
index 0000000..0fb233d
--- /dev/null
+++ b/board/stxssa/stxssa.c
@@ -0,0 +1,398 @@
+/*
+ * (C) Copyright 2005, Embedded Alley Solutions, Inc.
+ * Dan Malek, <dan@embeddedalley.com>
+ * Copied from STx GP3.
+ * Updates for Silicon Tx GP3 SSA
+ *
+ * (C) Copyright 2003,Motorola Inc.
+ * Xianghua Xiao, (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+extern long int spd_sdram (void);
+
+#include <common.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <ioports.h>
+#include <asm/io.h>
+#include <spd.h>
+#include <miiphy.h>
+
+long int fixed_sdram (void);
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+ /* Port A configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
+ /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
+ /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
+ /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */
+ /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */
+ /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */
+ /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
+ /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
+ /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
+ /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
+ /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
+ /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
+ /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
+ /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
+ /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
+ /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
+ /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
+ /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
+ /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
+ /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
+ /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
+ /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
+ /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */
+ /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */
+ /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
+ /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */
+ /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
+ /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
+ /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
+ /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
+ /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */
+ /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
+ },
+
+ /* Port B configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
+ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
+ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
+ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
+ /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
+ /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
+ /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
+ /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
+ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
+ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
+ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
+ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
+ /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
+ /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
+ /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
+ /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
+ /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
+ /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
+ /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */
+ /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
+ /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ },
+
+ /* Port C */
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
+ /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
+ /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
+ /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
+ /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */
+ /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
+ /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
+ /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
+ /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
+ /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
+ /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
+ /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
+ /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */
+ /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */
+ /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
+ /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */
+ /* PC15 */ { 0, 1, 0, 0, 0, 0 }, /* PC15 */
+ /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
+ /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
+ /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */
+ /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */
+ /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FETHMDC */
+ /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FETHMDIO */
+ /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
+ /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
+ /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
+ /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
+ /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
+ /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
+ /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
+ /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
+ /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
+ },
+
+ /* Port D */
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
+ /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
+ /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
+ /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */
+ /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 TxD */
+ /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */
+ /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
+ /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
+ /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
+ /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
+ /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
+ /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
+ /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
+ /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
+ /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
+ /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
+ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
+ /* PD14 */ { 1, 1, 1, 0, 0, 0 }, /* I2C CLK */
+ /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
+ /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
+ /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
+ /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
+ /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
+ /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
+ /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
+ /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
+ /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
+ /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ }
+};
+
+static uint64_t next_led_update;
+static uint led_bit;
+
+void
+reset_phy(void)
+{
+ volatile uint *blatch;
+#if 0
+ int i;
+#endif
+ blatch = (volatile uint *)CFG_LBC_CFGLATCH_BASE;
+
+ /* reset Giga bit Ethernet port if needed here */
+
+#if 1
+ *blatch &= ~0x000000c0;
+ udelay(100);
+#else
+ *blatch = 0;
+ asm("eieio");
+ for (i=0; i<1000; i++)
+ udelay(1000);
+#endif
+ *blatch = 0x000000c1; /* Light one led, too */
+ udelay(1000);
+
+#if 0 /* This is the port we really want to use for debugging. */
+ /* reset the CPM FEC port */
+#if (CONFIG_ETHER_INDEX == 2)
+ bcsr->bcsr2 &= ~FETH2_RST;
+ udelay(2);
+ bcsr->bcsr2 |= FETH2_RST;
+ udelay(1000);
+#elif (CONFIG_ETHER_INDEX == 3)
+ bcsr->bcsr3 &= ~FETH3_RST;
+ udelay(2);
+ bcsr->bcsr3 |= FETH3_RST;
+ udelay(1000);
+#endif
+#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
+ /* reset PHY */
+ miiphy_reset("FCC1 ETHERNET", 0x0);
+
+ /* change PHY address to 0x02 */
+ bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
+
+ bb_miiphy_write(NULL, 0x02, PHY_BMCR,
+ PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+#endif /* CONFIG_MII */
+#endif
+}
+
+int
+board_early_init_f(void)
+{
+#if defined(CONFIG_PCI)
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile ccsr_pcix_t *pci = &immr->im_pcix;
+
+ pci->peer &= 0xfffffffdf; /* disable master abort */
+#endif
+
+ /* Why is the phy reset done _after_ the ethernet
+ * initialization in lib_ppc/board.c?
+ * Do it here so it's done before the TSECs are used.
+ */
+ reset_phy();
+
+ return 0;
+}
+
+int
+checkboard(void)
+{
+ printf ("Board: Silicon Tx GPPP SSA Board\n");
+ return (0);
+}
+
+/* Blinkin' LEDS for Robert.
+*/
+void
+show_activity(int flag)
+{
+ volatile uint *blatch;
+
+ if (next_led_update > get_ticks())
+ return;
+
+ blatch = (volatile uint *)CFG_LBC_CFGLATCH_BASE;
+
+ led_bit >>= 1;
+ if (led_bit == 0)
+ led_bit = 0x08;
+ *blatch = (0xc0 | led_bit);
+ eieio();
+ next_led_update += (get_tbclk() / 4);
+}
+
+long int
+initdram (int board_type)
+{
+ long dram_size = 0;
+ extern long spd_sdram (void);
+
+#if defined(CONFIG_DDR_DLL)
+ {
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_gur_t *gur= &immap->im_gur;
+ uint temp_ddrdll = 0;
+
+ /* Work around to stabilize DDR DLL */
+ temp_ddrdll = gur->ddrdllcr;
+ gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
+ asm("sync;isync;msync");
+ }
+#endif
+
+ dram_size = spd_sdram ();
+
+#if defined(CONFIG_DDR_ECC)
+ /* Initialize and enable DDR ECC.
+ */
+ ddr_enable_ecc(dram_size);
+#endif
+
+ return dram_size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) CFG_MEMTEST_START;
+ uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *p;
+
+ printf("SDRAM test phase 1:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("SDRAM test phase 2:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("SDRAM test passed.\n");
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_PCI)
+
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_stxgp3_config_table[] = {
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_IDSEL_NUMBER, PCI_ANY_ID,
+ pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
+ } },
+ { }
+};
+#endif
+
+
+static struct pci_controller hose = {
+#ifndef CONFIG_PCI_PNP
+ config_table: pci_stxgp3_config_table,
+#endif
+};
+
+#endif /* CONFIG_PCI */
+
+
+void
+pci_init_board(void)
+{
+#ifdef CONFIG_PCI
+ extern void pci_mpc85xx_init(struct pci_controller *hose);
+
+ pci_mpc85xx_init(&hose);
+#endif /* CONFIG_PCI */
+}
diff --git a/board/stxssa/u-boot.lds b/board/stxssa/u-boot.lds
new file mode 100644
index 0000000..95ecf66
--- /dev/null
+++ b/board/stxssa/u-boot.lds
@@ -0,0 +1,158 @@
+/*
+ * (C) Copyright 2005 Embedded Alley Solutions, Inc.
+ * Dan Malek, <dan@embeddedalley.com>
+ * Copied from STx GP3.
+ * Updates for Silicon Tx GP3 SSA.
+ *
+ * (C) Copyright 2002,2003,Motorola,Inc.
+ * Xianghua Xiao, X.Xiao@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ board/stxssa/init.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc85xx/start.o (.text)
+ board/stxssa/init.o (.text)
+ cpu/mpc85xx/commproc.o (.text)
+ cpu/mpc85xx/traps.o (.text)
+ cpu/mpc85xx/interrupts.o (.text)
+ cpu/mpc85xx/serial_scc.o (.text)
+ cpu/mpc85xx/ether_fcc.o (.text)
+ cpu/mpc85xx/cpu_init.o (.text)
+ cpu/mpc85xx/cpu.o (.text)
+ cpu/mpc85xx/speed.o (.text)
+ cpu/mpc85xx/spd_sdram.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/xilinx/ml401/config.mk b/board/xilinx/ml401/config.mk
index 807f169..c75daaf 100644
--- a/board/xilinx/ml401/config.mk
+++ b/board/xilinx/ml401/config.mk
@@ -25,7 +25,7 @@
# Version: Xilinx EDK 6.3 EDK_Gmm.12.3
#
-TEXT_BASE = 0x12000000
+TEXT_BASE = 0x29000000
PLATFORM_CPPFLAGS += -mno-xl-soft-mul
PLATFORM_CPPFLAGS += -mno-xl-soft-div
diff --git a/board/xilinx/ml401/ml401.c b/board/xilinx/ml401/ml401.c
index b48103f..955936d 100644
--- a/board/xilinx/ml401/ml401.c
+++ b/board/xilinx/ml401/ml401.c
@@ -27,6 +27,8 @@
#include <common.h>
#include <config.h>
+#include <asm/microblaze_intc.h>
+#include <asm/asm.h>
void do_reset (void)
{
@@ -43,7 +45,25 @@
int gpio_init (void)
{
#ifdef CFG_GPIO_0
- *((unsigned long *)(CFG_GPIO_0_ADDR)) = 0x0;
+ *((unsigned long *)(CFG_GPIO_0_ADDR)) = 0xFFFFFFFF;
#endif
return 0;
}
+
+#ifdef CFG_FSL_2
+void fsl_isr2 (void *arg) {
+ volatile int num;
+ *((unsigned int *)(CFG_GPIO_0_ADDR + 0x4)) =
+ ++(*((unsigned int *)(CFG_GPIO_0_ADDR + 0x4)));
+ GET (num, 2);
+ NGET (num, 2);
+ puts("*");
+}
+
+void fsl_init2 (void) {
+ puts("fsl_init2\n");
+ install_interrupt_handler (FSL_INTR_2,\
+ fsl_isr2,\
+ NULL);
+}
+#endif
diff --git a/board/xilinx/ml401/xparameters.h b/board/xilinx/ml401/xparameters.h
old mode 100644
new mode 100755
index 18d24f9..1a116ea
--- a/board/xilinx/ml401/xparameters.h
+++ b/board/xilinx/ml401/xparameters.h
@@ -21,47 +21,55 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
- *
* CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 6.3 EDK_Gmm.12.3
+ * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
*/
/* System Clock Frequency */
-#define XILINX_CLOCK_FREQ 66666667
+#define XILINX_CLOCK_FREQ 100000000
-/* Interrupt controller is intc_0 */
-#define XILINX_INTC_BASEADDR 0xd1000fc0
-#define XILINX_INTC_NUM_INTR_INPUTS 12
+/* Microblaze is microblaze_0 */
+#define XILINX_USE_MSR_INSTR 1
+#define XILINX_FSL_NUMBER 3
-/* Timer pheriphery is opb_timer_0 */
-#define XILINX_TIMER_BASEADDR 0xa2000000
+/* Interrupt controller is opb_intc_0 */
+#define XILINX_INTC_BASEADDR 0x41200000
+#define XILINX_INTC_NUM_INTR_INPUTS 6
+
+/* Timer pheriphery is opb_timer_1 */
+#define XILINX_TIMER_BASEADDR 0x41c00000
#define XILINX_TIMER_IRQ 0
-/* Uart pheriphery is console_uart */
-#define XILINX_UART_BASEADDR 0xa0000000
+/* Uart pheriphery is RS232_Uart */
+#define XILINX_UART_BASEADDR 0x40600000
#define XILINX_UART_BAUDRATE 115200
-/* GPIO is opb_gpio_0*/
-#define XILINX_GPIO_BASEADDR 0x90000000
+/* IIC pheriphery is IIC_EEPROM */
+#define XILINX_IIC_0_BASEADDR 0x40800000
+#define XILINX_IIC_0_FREQ 100000
+#define XILINX_IIC_0_BIT 0
-/* Flash Memory is opb_emc_0 */
-#define XILINX_FLASH_START 0x28000000
+/* GPIO is LEDs_4Bit*/
+#define XILINX_GPIO_BASEADDR 0x40000000
+
+/* Flash Memory is FLASH_2Mx32 */
+#define XILINX_FLASH_START 0x2c000000
#define XILINX_FLASH_SIZE 0x00800000
-/* Main Memory is plb_ddr_0 */
-#define XILINX_RAM_START 0x10000000
-#define XILINX_RAM_SIZE 0x10000000
+/* Main Memory is DDR_SDRAM_64Mx32 */
+#define XILINX_RAM_START 0x28000000
+#define XILINX_RAM_SIZE 0x04000000
-/* Sysace Controller is opb_sysace_0 */
-#define XILINX_SYSACE_BASEADDR 0xCF000000
-#define XILINX_SYSACE_HIGHADDR 0xCF0001FF
+/* Sysace Controller is SysACE_CompactFlash */
+#define XILINX_SYSACE_BASEADDR 0x41800000
+#define XILINX_SYSACE_HIGHADDR 0x4180ffff
#define XILINX_SYSACE_MEM_WIDTH 16
-/* Ethernet controller is opb_ethernet_0 */
+/* Ethernet controller is Ethernet_MAC */
#define XPAR_XEMAC_NUM_INSTANCES 1
#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
+#define XPAR_OPB_ETHERNET_0_BASEADDR 0x40c00000
+#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0ffff
#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
diff --git a/common/Makefile b/common/Makefile
index 74a6af2..bc1f714 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -45,12 +45,12 @@
env_nand.o env_dataflash.o env_flash.o env_eeprom.o \
env_nvram.o env_nowhere.o \
exports.o \
- flash.o fpga.o ft_build.o \
+ fdt_support.o flash.o fpga.o ft_build.o \
hush.o kgdb.o lcd.o lists.o lynxkdi.o \
memsize.o miiphybb.o miiphyutil.o \
s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o spartan3.o \
usb.o usb_kbd.o usb_storage.o \
- virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o
+ virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o cmd_mfsl.o
SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 2721216b..a6499e8 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -37,6 +37,7 @@
#if defined(CONFIG_OF_LIBFDT)
#include <fdt.h>
#include <libfdt.h>
+#include <fdt_support.h>
#endif
#if defined(CONFIG_OF_FLAT_TREE)
#include <ft_build.h>
@@ -748,7 +749,7 @@
of_flat_tree = (char *) simple_strtoul(argv[3], NULL, 16);
hdr = (image_header_t *)of_flat_tree;
#if defined(CONFIG_OF_LIBFDT)
- if (be32_to_cpu(fdt_magic(of_flat_tree)) == FDT_MAGIC) {
+ if (fdt_check_header(of_flat_tree) == 0) {
#else
if (*(ulong *)of_flat_tree == OF_DT_HEADER) {
#endif
@@ -778,9 +779,8 @@
checksum = ntohl(hdr->ih_dcrc);
addr = (ulong)((uchar *)(hdr) + sizeof(image_header_t));
- len = ntohl(hdr->ih_size);
- if(checksum != crc32(0, (uchar *)addr, len)) {
+ if(checksum != crc32(0, (uchar *)addr, ntohl(hdr->ih_size))) {
printf("ERROR: Flat Device Tree checksum is invalid\n");
return;
}
@@ -795,7 +795,7 @@
return;
}
#if defined(CONFIG_OF_LIBFDT)
- if (be32_to_cpu(fdt_magic(of_flat_tree + sizeof(image_header_t))) != FDT_MAGIC) {
+ if (fdt_check_header(of_flat_tree + sizeof(image_header_t)) == 0) {
#else
if (*((ulong *)(of_flat_tree + sizeof(image_header_t))) != OF_DT_HEADER) {
#endif
@@ -836,7 +836,7 @@
}
#if defined(CONFIG_OF_LIBFDT)
- if (be32_to_cpu(fdt_magic(of_data)) != FDT_MAGIC) {
+ if (fdt_check_header((void *)of_data) != 0) {
#else
if (((struct boot_param_header *)of_data)->magic != OF_DT_HEADER) {
#endif
@@ -937,23 +937,44 @@
if (of_data) {
int err;
ulong of_start, of_len;
+
of_len = be32_to_cpu(fdt_totalsize(of_data));
- /* provide extra 8k pad */
+ /* position on a 4K boundary before the initrd/kbd */
if (initrd_start)
- of_start = initrd_start - of_len - 8192;
+ of_start = initrd_start - of_len;
else
- of_start = (ulong)kbd - of_len - 8192;
+ of_start = (ulong)kbd - of_len;
of_start &= ~(4096 - 1); /* align on page */
debug ("## device tree at 0x%08lX ... 0x%08lX (len=%ld=0x%lX)\n",
of_data, of_data + of_len - 1, of_len, of_len);
-
+ of_flat_tree = (char *)of_start;
printf (" Loading Device Tree to %08lx, end %08lx ... ",
of_start, of_start + of_len - 1);
- err = fdt_open_into(of_start, of_data, of_len);
+ err = fdt_open_into((void *)of_start, (void *)of_data, of_len);
if (err != 0) {
- printf ("libfdt: %s\n", fdt_strerror(err));
+ printf ("libfdt: %s " __FILE__ " %d\n", fdt_strerror(err), __LINE__);
}
+ /*
+ * Add the chosen node if it doesn't exist, add the env and bd_t
+ * if the user wants it (the logic is in the subroutines).
+ */
+ if (fdt_chosen(of_flat_tree, initrd_start, initrd_end, 0) < 0) {
+ printf("Failed creating the /chosen node (0x%08X), aborting.\n", of_flat_tree);
+ return;
+ }
+#ifdef CONFIG_OF_HAS_UBOOT_ENV
+ if (fdt_env(of_flat_tree) < 0) {
+ printf("Failed creating the /u-boot-env node, aborting.\n");
+ return;
+ }
+#endif
+#ifdef CONFIG_OF_HAS_BD_T
+ if (fdt_bd_t(of_flat_tree) < 0) {
+ printf("Failed creating the /bd_t node, aborting.\n");
+ return;
+ }
+#endif
}
#endif
#if defined(CONFIG_OF_FLAT_TREE)
@@ -1004,6 +1025,24 @@
ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
/* ft_dump_blob(of_flat_tree); */
#endif
+#if defined(CONFIG_OF_LIBFDT)
+ if (fdt_chosen(of_flat_tree, initrd_start, initrd_end, 0) < 0) {
+ printf("Failed creating the /chosen node (0x%08X), aborting.\n", of_flat_tree);
+ return;
+ }
+#ifdef CONFIG_OF_HAS_UBOOT_ENV
+ if (fdt_env(of_flat_tree) < 0) {
+ printf("Failed creating the /u-boot-env node, aborting.\n");
+ return;
+ }
+#endif
+#ifdef CONFIG_OF_HAS_BD_T
+ if (fdt_bd_t(of_flat_tree) < 0) {
+ printf("Failed creating the /bd_t node, aborting.\n");
+ return;
+ }
+#endif
+#endif /* if defined(CONFIG_OF_LIBFDT) */
(*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0);
#endif
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index 968bade..08fe351 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -30,9 +30,11 @@
#include <linux/types.h>
#ifdef CONFIG_OF_LIBFDT
+
#include <asm/global_data.h>
#include <fdt.h>
#include <libfdt.h>
+#include <fdt_support.h>
#define MAX_LEVEL 32 /* how deeply nested we will go */
#define SCRATCHPAD 1024 /* bytes of scratchpad memory */
@@ -53,9 +55,6 @@
*/
static int fdt_valid(void);
static void print_data(const void *data, int len);
-static int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end);
-static int fdt_env(void *fdt);
-static int fdt_bd_t(void *fdt);
/*
@@ -437,7 +436,7 @@
* Create a chosen node
********************************************************************/
} else if (op == 'c') {
- fdt_chosen(fdt, 0, 0);
+ fdt_chosen(fdt, 0, 0, 1);
/********************************************************************
* Create a u-boot-env node
@@ -466,25 +465,36 @@
static int fdt_valid(void)
{
+ int err;
+
if (fdt == NULL) {
- printf ("The address of the fdt is invalid.\n");
+ printf ("The address of the fdt is invalid (NULL).\n");
return 0;
}
- if (!fdt || (fdt_magic(fdt) != FDT_MAGIC)) {
- fdt = NULL;
- printf ("Unrecognized fdt: bad magic\n");
- return 0;
- }
- if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) {
- printf ("Unsupported fdt version: $d < %d\n",
- FDT_FIRST_SUPPORTED_VERSION, fdt_version(fdt));
- fdt = NULL;
- return 0;
- }
- if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION) {
- printf ("Unsupported fdt version: $d > %d\n",
- fdt_version(fdt), FDT_LAST_SUPPORTED_VERSION);
- fdt = NULL;
+
+ err = fdt_check_header(fdt);
+ if (err == 0)
+ return 1; /* valid */
+
+ if (err < 0) {
+ printf("libfdt: %s", fdt_strerror(err));
+ /*
+ * Be more informative on bad version.
+ */
+ if (err == -FDT_ERR_BADVERSION) {
+ if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) {
+ printf (" - too old, fdt $d < %d",
+ fdt_version(fdt), FDT_FIRST_SUPPORTED_VERSION);
+ fdt = NULL;
+ }
+ if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION) {
+ printf (" - too new, fdt $d > %d",
+ fdt_version(fdt), FDT_LAST_SUPPORTED_VERSION);
+ fdt = NULL;
+ }
+ return 0;
+ }
+ printf("\n");
return 0;
}
return 1;
@@ -593,255 +603,6 @@
/********************************************************************/
-static int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end)
-{
- bd_t *bd = gd->bd;
- int nodeoffset;
- int err;
- u32 tmp; /* used to set 32 bit integer properties */
- char *str; /* used to set string properties */
- ulong clock;
-
- if (initrd_start && initrd_end) {
- err = fdt_add_reservemap_entry(fdt,
- initrd_start, initrd_end - initrd_start + 1);
- if (err < 0) {
- printf("libfdt: %s\n", fdt_strerror(err));
- return err;
- }
- }
-
- /*
- * See if we already have a "chosen" node, create it if not.
- */
- nodeoffset = fdt_path_offset (fdt, "/chosen");
- if (nodeoffset < 0) {
- /*
- * Create a new node "/chosen" (offset 0 is root level)
- */
- nodeoffset = fdt_add_subnode(fdt, 0, "chosen");
- if (nodeoffset < 0) {
- printf("libfdt: %s\n", fdt_strerror(nodeoffset));
- return nodeoffset;
- }
- }
-
- str = getenv("bootargs");
- if (str != NULL) {
- err = fdt_setprop(fdt, nodeoffset, "bootargs", str, strlen(str)+1);
- if (err < 0)
- printf("libfdt: %s\n", fdt_strerror(err));
- }
- if (initrd_start && initrd_end) {
- tmp = __cpu_to_be32(initrd_start);
- err = fdt_setprop(fdt, nodeoffset, "linux,initrd-start", &tmp, sizeof(tmp));
- if (err < 0)
- printf("libfdt: %s\n", fdt_strerror(err));
- tmp = __cpu_to_be32(initrd_end);
- err = fdt_setprop(fdt, nodeoffset, "linux,initrd-end", &tmp, sizeof(tmp));
- if (err < 0)
- printf("libfdt: %s\n", fdt_strerror(err));
- }
-#ifdef OF_STDOUT_PATH
- err = fdt_setprop(fdt, nodeoffset, "linux,stdout-path", OF_STDOUT_PATH, strlen(OF_STDOUT_PATH)+1);
- if (err < 0)
- printf("libfdt: %s\n", fdt_strerror(err));
-#endif
-
- nodeoffset = fdt_path_offset (fdt, "/cpus");
- if (nodeoffset >= 0) {
- clock = cpu_to_be32(bd->bi_intfreq);
- err = fdt_setprop(fdt, nodeoffset, "clock-frequency", &clock, 4);
- if (err < 0)
- printf("libfdt: %s\n", fdt_strerror(err));
- }
-#ifdef OF_TBCLK
- nodeoffset = fdt_path_offset (fdt, "/cpus/" OF_CPU "/timebase-frequency");
- if (nodeoffset >= 0) {
- clock = cpu_to_be32(OF_TBCLK);
- err = fdt_setprop(fdt, nodeoffset, "clock-frequency", &clock, 4);
- if (err < 0)
- printf("libfdt: %s\n", fdt_strerror(err));
- }
-#endif
-}
-
-/********************************************************************/
-
-#ifdef CONFIG_OF_HAS_BD_T
-
-/* Function that returns a character from the environment */
-extern uchar(*env_get_char) (int);
-
-#define BDM(x) { .name = #x, .offset = offsetof(bd_t, bi_ ##x ) }
-
-static const struct {
- const char *name;
- int offset;
-} bd_map[] = {
- BDM(memstart),
- BDM(memsize),
- BDM(flashstart),
- BDM(flashsize),
- BDM(flashoffset),
- BDM(sramstart),
- BDM(sramsize),
-#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \
- || defined(CONFIG_E500)
- BDM(immr_base),
-#endif
-#if defined(CONFIG_MPC5xxx)
- BDM(mbar_base),
-#endif
-#if defined(CONFIG_MPC83XX)
- BDM(immrbar),
-#endif
-#if defined(CONFIG_MPC8220)
- BDM(mbar_base),
- BDM(inpfreq),
- BDM(pcifreq),
- BDM(pevfreq),
- BDM(flbfreq),
- BDM(vcofreq),
-#endif
- BDM(bootflags),
- BDM(ip_addr),
- BDM(intfreq),
- BDM(busfreq),
-#ifdef CONFIG_CPM2
- BDM(cpmfreq),
- BDM(brgfreq),
- BDM(sccfreq),
- BDM(vco),
-#endif
-#if defined(CONFIG_MPC5xxx)
- BDM(ipbfreq),
- BDM(pcifreq),
-#endif
- BDM(baudrate),
-};
-
-static int fdt_env(void *fdt)
-{
- int nodeoffset;
- int err;
- int k, nxt;
- int i;
- static char tmpenv[256];
-
- /*
- * See if we already have a "u-boot-env" node, delete it if so.
- * Then create a new empty node.
- */
- nodeoffset = fdt_path_offset (fdt, "/u-boot-env");
- if (nodeoffset >= 0) {
- err = fdt_del_node(fdt, nodeoffset);
- if (err < 0) {
- printf("libfdt: %s\n", fdt_strerror(err));
- return err;
- }
- }
- /*
- * Create a new node "/u-boot-env" (offset 0 is root level)
- */
- nodeoffset = fdt_add_subnode(fdt, 0, "u-boot-env");
- if (nodeoffset < 0) {
- printf("libfdt: %s\n", fdt_strerror(nodeoffset));
- return nodeoffset;
- }
-
- for (i = 0; env_get_char(i) != '\0'; i = nxt + 1) {
- char *s, *lval, *rval;
-
- /*
- * Find the end of the name=definition
- */
- for (nxt = i; env_get_char(nxt) != '\0'; ++nxt)
- ;
- s = tmpenv;
- for (k = i; k < nxt && s < &tmpenv[sizeof(tmpenv) - 1]; ++k)
- *s++ = env_get_char(k);
- *s++ = '\0';
- lval = tmpenv;
- /*
- * Find the first '=': it separates the name from the value
- */
- s = strchr(tmpenv, '=');
- if (s != NULL) {
- *s++ = '\0';
- rval = s;
- } else
- continue;
- err = fdt_setprop(fdt, nodeoffset, lval, rval, strlen(rval)+1);
- if (err < 0) {
- printf("\"%s\" - libfdt: %s\n", lval, fdt_strerror(err));
- return err;
- }
- }
- return 0;
-}
-#endif /* CONFIG_OF_HAS_UBOOT_ENV */
-
-/********************************************************************/
-
-#ifdef CONFIG_OF_HAS_BD_T
-static int fdt_bd_t(void *fdt)
-{
- bd_t *bd = gd->bd;
- int nodeoffset;
- int err;
- u32 tmp; /* used to set 32 bit integer properties */
- int i;
-
- /*
- * See if we already have a "bd_t" node, delete it if so.
- * Then create a new empty node.
- */
- nodeoffset = fdt_path_offset (fdt, "/bd_t");
- if (nodeoffset >= 0) {
- err = fdt_del_node(fdt, nodeoffset);
- if (err < 0) {
- printf("libfdt: %s\n", fdt_strerror(err));
- return err;
- }
- }
- /*
- * Create a new node "/bd_t" (offset 0 is root level)
- */
- nodeoffset = fdt_add_subnode(fdt, 0, "bd_t");
- if (nodeoffset < 0) {
- printf("libfdt: %s\n", fdt_strerror(nodeoffset));
- return nodeoffset;
- }
- /*
- * Use the string/pointer structure to create the entries...
- */
- for (i = 0; i < sizeof(bd_map)/sizeof(bd_map[0]); i++) {
- tmp = cpu_to_be32(getenv("bootargs"));
- err = fdt_setprop(fdt, nodeoffset, bd_map[i].name, &tmp, sizeof(tmp));
- if (err < 0)
- printf("libfdt: %s\n", fdt_strerror(err));
- }
- /*
- * Add a couple of oddball entries...
- */
- err = fdt_setprop(fdt, nodeoffset, "enetaddr", &bd->bi_enetaddr, 6);
- if (err < 0)
- printf("libfdt: %s\n", fdt_strerror(err));
- err = fdt_setprop(fdt, nodeoffset, "ethspeed", &bd->bi_ethspeed, 4);
- if (err < 0)
- printf("libfdt: %s\n", fdt_strerror(err));
-
-#ifdef CONFIG_OF_BOARD_SETUP
- ft_board_setup(fdt, bd);
-#endif
-
- return 0;
-}
-#endif /* CONFIG_OF_HAS_BD_T */
-
-/********************************************************************/
-
U_BOOT_CMD(
fdt, 5, 0, do_fdt,
"fdt - flattened device tree utility commands\n",
@@ -871,4 +632,4 @@
" fdt set /cpus \"#address-cells\" \"[00 00 00 01]\"\n"
);
-#endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_OF_LIBFDT */
diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c
new file mode 100644
index 0000000..ffa2666
--- /dev/null
+++ b/common/cmd_mfsl.c
@@ -0,0 +1,417 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Microblaze FSL support
+ */
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_MFSL)
+#include <asm/asm.h>
+
+int do_frd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned int fslnum;
+ unsigned int num;
+ unsigned int blocking;
+
+ if (argc < 2) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ fslnum = (unsigned int)simple_strtoul (argv[1], NULL, 16);
+ blocking = (unsigned int)simple_strtoul (argv[2], NULL, 16);
+ if (fslnum < 0 || fslnum >= XILINX_FSL_NUMBER) {
+ puts ("Bad number of FSL\n");
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ switch (fslnum) {
+#if (XILINX_FSL_NUMBER > 0)
+ case 0:
+ switch (blocking) {
+ case 0: NGET (num, 0);
+ break;
+ case 1: NCGET (num, 0);
+ break;
+ case 2: GET (num, 0);
+ break;
+ case 3: CGET (num, 0);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 1)
+ case 1:
+ switch (blocking) {
+ case 0: NGET (num, 1);
+ break;
+ case 1: NCGET (num, 1);
+ break;
+ case 2: GET (num, 1);
+ break;
+ case 3: CGET (num, 1);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 2)
+ case 2:
+ switch (blocking) {
+ case 0: NGET (num, 2);
+ break;
+ case 1: NCGET (num, 2);
+ break;
+ case 2: GET (num, 2);
+ break;
+ case 3: CGET (num, 2);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 3)
+ case 3:
+ switch (blocking) {
+ case 0: NGET (num, 3);
+ break;
+ case 1: NCGET (num, 3);
+ break;
+ case 2: GET (num, 3);
+ break;
+ case 3: CGET (num, 3);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 4)
+ case 4:
+ switch (blocking) {
+ case 0: NGET (num, 4);
+ break;
+ case 1: NCGET (num, 4);
+ break;
+ case 2: GET (num, 4);
+ break;
+ case 3: CGET (num, 4);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 5)
+ case 5:
+ switch (blocking) {
+ case 0: NGET (num, 5);
+ break;
+ case 1: NCGET (num, 5);
+ break;
+ case 2: GET (num, 5);
+ break;
+ case 3: CGET (num, 5);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 6)
+ case 6:
+ switch (blocking) {
+ case 0: NGET (num, 6);
+ break;
+ case 1: NCGET (num, 6);
+ break;
+ case 2: GET (num, 6);
+ break;
+ case 3: CGET (num, 6);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 7)
+ case 7:
+ switch (blocking) {
+ case 0: NGET (num, 7);
+ break;
+ case 1: NCGET (num, 7);
+ break;
+ case 2: GET (num, 7);
+ break;
+ case 3: CGET (num, 7);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+ default:
+ return 1;
+ }
+
+ printf ("%01x: 0x%08lx - %s %s read\n", fslnum, num,
+ blocking < 2 ? "non blocking" : "blocking",
+ ((blocking == 1) || (blocking == 3)) ? "control" : "data" );
+ return 0;
+}
+
+int do_fwr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned int fslnum;
+ unsigned int num;
+ unsigned int blocking;
+
+ if (argc < 3) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ fslnum = (unsigned int)simple_strtoul (argv[1], NULL, 16);
+ num = (unsigned int)simple_strtoul (argv[2], NULL, 16);
+ blocking = (unsigned int)simple_strtoul (argv[3], NULL, 16);
+ if (fslnum < 0 || fslnum >= XILINX_FSL_NUMBER) {
+ printf ("Bad number of FSL\nUsage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ switch (fslnum) {
+#if (XILINX_FSL_NUMBER > 0)
+ case 0:
+ switch (blocking) {
+ case 0: NPUT (num, 0);
+ break;
+ case 1: NCPUT (num, 0);
+ break;
+ case 2: PUT (num, 0);
+ break;
+ case 3: CPUT (num, 0);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 1)
+ case 1:
+ switch (blocking) {
+ case 0: NPUT (num, 1);
+ break;
+ case 1: NCPUT (num, 1);
+ break;
+ case 2: PUT (num, 1);
+ break;
+ case 3: CPUT (num, 1);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 2)
+ case 2:
+ switch (blocking) {
+ case 0: NPUT (num, 2);
+ break;
+ case 1: NCPUT (num, 2);
+ break;
+ case 2: PUT (num, 2);
+ break;
+ case 3: CPUT (num, 2);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 3)
+ case 3:
+ switch (blocking) {
+ case 0: NPUT (num, 3);
+ break;
+ case 1: NCPUT (num, 3);
+ break;
+ case 2: PUT (num, 3);
+ break;
+ case 3: CPUT (num, 3);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 4)
+ case 4:
+ switch (blocking) {
+ case 0: NPUT (num, 4);
+ break;
+ case 1: NCPUT (num, 4);
+ break;
+ case 2: PUT (num, 4);
+ break;
+ case 3: CPUT (num, 4);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 5)
+ case 5:
+ switch (blocking) {
+ case 0: NPUT (num, 5);
+ break;
+ case 1: NCPUT (num, 5);
+ break;
+ case 2: PUT (num, 5);
+ break;
+ case 3: CPUT (num, 5);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 6)
+ case 6:
+ switch (blocking) {
+ case 0: NPUT (num, 6);
+ break;
+ case 1: NCPUT (num, 6);
+ break;
+ case 2: PUT (num, 6);
+ break;
+ case 3: CPUT (num, 6);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+#if (XILINX_FSL_NUMBER > 7)
+ case 7:
+ switch (blocking) {
+ case 0: NPUT (num, 7);
+ break;
+ case 1: NCPUT (num, 7);
+ break;
+ case 2: PUT (num, 7);
+ break;
+ case 3: CPUT (num, 7);
+ break;
+ default:
+ return 2;
+ }
+ break;
+#endif
+ default:
+ return 1;
+ }
+
+ printf ("%01x: 0x%08lx - %s %s write\n", fslnum, num,
+ blocking < 2 ? "non blocking" : "blocking",
+ ((blocking == 1) || (blocking == 3)) ? "control" : "data" );
+ return 0;
+
+}
+
+int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned int reg = 0;
+ unsigned int val = 0;
+
+ reg = (unsigned int)simple_strtoul (argv[1], NULL, 16);
+ val = (unsigned int)simple_strtoul (argv[2], NULL, 16);
+ if (argc < 1) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+ switch (reg) {
+ case 0x1:
+ if (argc > 2) {
+ MTS (val, rmsr);
+ NOP;
+ MFS (val, rmsr);
+
+ } else {
+ MFS (val, rmsr);
+ }
+ puts ("MSR");
+ break;
+ case 0x3:
+ MFS (val, rear);
+ puts ("EAR");
+ break;
+ case 0x5:
+ MFS (val, resr);
+ puts ("ESR");
+ break;
+ default:
+ return 1;
+ }
+ printf (": 0x%08lx\n", val);
+ return 0;
+}
+
+/***************************************************/
+
+U_BOOT_CMD (frd, 3, 1, do_frd,
+ "frd - read data from FSL\n",
+ "- [fslnum [0|1|2|3]]\n"
+ " 0 - non blocking data read\n"
+ " 1 - non blocking control read\n"
+ " 2 - blocking data read\n"
+ " 3 - blocking control read\n");
+
+
+U_BOOT_CMD (fwr, 4, 1, do_fwr,
+ "fwr - write data to FSL\n",
+ "- [fslnum [0|1|2|3]]\n"
+ " 0 - non blocking data write\n"
+ " 1 - non blocking control write\n"
+ " 2 - blocking data write\n"
+ " 3 - blocking control write\n");
+
+U_BOOT_CMD (rspr, 3, 1, do_rspr,
+ "rmsr - read/write special purpose register\n",
+ "- reg_num [write value] read/write special purpose register\n"
+ " 0 - MSR - Machine status register\n"
+ " 1 - EAR - Exception address register\n"
+ " 2 - ESR - Exception status register\n");
+
+#endif /* CONFIG_MICROBLAZE & CFG_CMD_MFSL */
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index 9834ba6..977ec5b 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -391,7 +391,10 @@
void setenv (char *varname, char *varvalue)
{
char *argv[4] = { "setenv", varname, varvalue, NULL };
- _do_setenv (0, 3, argv);
+ if (varvalue == NULL)
+ _do_setenv (0, 2, argv);
+ else
+ _do_setenv (0, 3, argv);
}
int do_setenv ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
diff --git a/common/console.c b/common/console.c
index e9f23be..d8a0cb6 100644
--- a/common/console.c
+++ b/common/console.c
@@ -494,13 +494,7 @@
/* suppress all output if splash screen is enabled and we have
a bmp to display */
if (getenv("splashimage") != NULL)
- outputdev = search_device (DEV_FLAGS_OUTPUT, "nulldev");
-#endif
-
-#ifdef CONFIG_SILENT_CONSOLE
- /* Suppress all output if "silent" mode requested */
- if (gd->flags & GD_FLG_SILENT)
- outputdev = search_device (DEV_FLAGS_OUTPUT, "nulldev");
+ gd->flags |= GD_FLG_SILENT;
#endif
/* Scan devices looking for input and output devices */
diff --git a/common/fdt_support.c b/common/fdt_support.c
new file mode 100644
index 0000000..69099c4
--- /dev/null
+++ b/common/fdt_support.c
@@ -0,0 +1,347 @@
+/*
+ * (C) Copyright 2007
+ * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/ctype.h>
+#include <linux/types.h>
+
+#ifdef CONFIG_OF_LIBFDT
+
+#include <asm/global_data.h>
+#include <fdt.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+/*
+ * Global data (for the gd->bd)
+ */
+DECLARE_GLOBAL_DATA_PTR;
+
+
+/********************************************************************/
+
+int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
+{
+ bd_t *bd = gd->bd;
+ int nodeoffset;
+ int err;
+ u32 tmp; /* used to set 32 bit integer properties */
+ char *str; /* used to set string properties */
+ ulong clock;
+
+ err = fdt_check_header(fdt);
+ if (err < 0) {
+ printf("libfdt: %s\n", fdt_strerror(err));
+ return err;
+ }
+
+ if (initrd_start && initrd_end) {
+ struct fdt_reserve_entry re;
+ int used;
+ int total;
+ int j;
+
+ err = fdt_num_reservemap(fdt, &used, &total);
+ if (err < 0) {
+ printf("libfdt: %s\n", fdt_strerror(err));
+ return err;
+ }
+ if (used >= total) {
+ printf("fdt_chosen: no room in the reserved map (%d of %d)\n",
+ used, total);
+ return -1;
+ }
+ /*
+ * Look for an existing entry and update it. If we don't find
+ * the entry, we will j be the next available slot.
+ */
+ for (j = 0; j < used; j++) {
+ err = fdt_get_reservemap(fdt, j, &re);
+ if (re.address == initrd_start) {
+ break;
+ }
+ }
+ err = fdt_replace_reservemap_entry(fdt, j,
+ initrd_start, initrd_end - initrd_start + 1);
+ if (err < 0) {
+ printf("libfdt: %s\n", fdt_strerror(err));
+ return err;
+ }
+ }
+
+ /*
+ * Find the "chosen" node.
+ */
+ nodeoffset = fdt_path_offset (fdt, "/chosen");
+
+ /*
+ * If we have a "chosen" node already the "force the writing"
+ * is not set, our job is done.
+ */
+ if ((nodeoffset >= 0) && !force)
+ return 0;
+
+ /*
+ * No "chosen" node in the blob: create it.
+ */
+ if (nodeoffset < 0) {
+ /*
+ * Create a new node "/chosen" (offset 0 is root level)
+ */
+ nodeoffset = fdt_add_subnode(fdt, 0, "chosen");
+ if (nodeoffset < 0) {
+ printf("libfdt: %s\n", fdt_strerror(nodeoffset));
+ return nodeoffset;
+ }
+ }
+
+ /*
+ * Update pre-existing properties, create them if non-existant.
+ */
+ str = getenv("bootargs");
+ if (str != NULL) {
+ err = fdt_setprop(fdt, nodeoffset, "bootargs", str, strlen(str)+1);
+ if (err < 0)
+ printf("libfdt: %s\n", fdt_strerror(err));
+ }
+ if (initrd_start && initrd_end) {
+ tmp = __cpu_to_be32(initrd_start);
+ err = fdt_setprop(fdt, nodeoffset, "linux,initrd-start", &tmp, sizeof(tmp));
+ if (err < 0)
+ printf("libfdt: %s\n", fdt_strerror(err));
+ tmp = __cpu_to_be32(initrd_end);
+ err = fdt_setprop(fdt, nodeoffset, "linux,initrd-end", &tmp, sizeof(tmp));
+ if (err < 0)
+ printf("libfdt: %s\n", fdt_strerror(err));
+ }
+#ifdef OF_STDOUT_PATH
+ err = fdt_setprop(fdt, nodeoffset, "linux,stdout-path", OF_STDOUT_PATH, strlen(OF_STDOUT_PATH)+1);
+ if (err < 0)
+ printf("libfdt: %s\n", fdt_strerror(err));
+#endif
+
+ nodeoffset = fdt_path_offset (fdt, "/cpus");
+ if (nodeoffset >= 0) {
+ clock = cpu_to_be32(bd->bi_intfreq);
+ err = fdt_setprop(fdt, nodeoffset, "clock-frequency", &clock, 4);
+ if (err < 0)
+ printf("libfdt: %s\n", fdt_strerror(err));
+ }
+#ifdef OF_TBCLK
+ nodeoffset = fdt_path_offset (fdt, "/cpus/" OF_CPU "/timebase-frequency");
+ if (nodeoffset >= 0) {
+ clock = cpu_to_be32(OF_TBCLK);
+ err = fdt_setprop(fdt, nodeoffset, "clock-frequency", &clock, 4);
+ if (err < 0)
+ printf("libfdt: %s\n", fdt_strerror(err));
+ }
+#endif
+ return err;
+}
+
+/********************************************************************/
+
+#ifdef CONFIG_OF_HAS_UBOOT_ENV
+
+/* Function that returns a character from the environment */
+extern uchar(*env_get_char) (int);
+
+
+int fdt_env(void *fdt)
+{
+ int nodeoffset;
+ int err;
+ int k, nxt;
+ int i;
+ static char tmpenv[256];
+
+ err = fdt_check_header(fdt);
+ if (err < 0) {
+ printf("libfdt: %s\n", fdt_strerror(err));
+ return err;
+ }
+
+ /*
+ * See if we already have a "u-boot-env" node, delete it if so.
+ * Then create a new empty node.
+ */
+ nodeoffset = fdt_path_offset (fdt, "/u-boot-env");
+ if (nodeoffset >= 0) {
+ err = fdt_del_node(fdt, nodeoffset);
+ if (err < 0) {
+ printf("libfdt: %s\n", fdt_strerror(err));
+ return err;
+ }
+ }
+ /*
+ * Create a new node "/u-boot-env" (offset 0 is root level)
+ */
+ nodeoffset = fdt_add_subnode(fdt, 0, "u-boot-env");
+ if (nodeoffset < 0) {
+ printf("libfdt: %s\n", fdt_strerror(nodeoffset));
+ return nodeoffset;
+ }
+
+ for (i = 0; env_get_char(i) != '\0'; i = nxt + 1) {
+ char *s, *lval, *rval;
+
+ /*
+ * Find the end of the name=definition
+ */
+ for (nxt = i; env_get_char(nxt) != '\0'; ++nxt)
+ ;
+ s = tmpenv;
+ for (k = i; k < nxt && s < &tmpenv[sizeof(tmpenv) - 1]; ++k)
+ *s++ = env_get_char(k);
+ *s++ = '\0';
+ lval = tmpenv;
+ /*
+ * Find the first '=': it separates the name from the value
+ */
+ s = strchr(tmpenv, '=');
+ if (s != NULL) {
+ *s++ = '\0';
+ rval = s;
+ } else
+ continue;
+ err = fdt_setprop(fdt, nodeoffset, lval, rval, strlen(rval)+1);
+ if (err < 0) {
+ printf("libfdt: %s\n", fdt_strerror(err));
+ return err;
+ }
+ }
+ return 0;
+}
+#endif /* ifdef CONFIG_OF_HAS_UBOOT_ENV */
+
+/********************************************************************/
+
+#ifdef CONFIG_OF_HAS_BD_T
+
+#define BDM(x) { .name = #x, .offset = offsetof(bd_t, bi_ ##x ) }
+
+static const struct {
+ const char *name;
+ int offset;
+} bd_map[] = {
+ BDM(memstart),
+ BDM(memsize),
+ BDM(flashstart),
+ BDM(flashsize),
+ BDM(flashoffset),
+ BDM(sramstart),
+ BDM(sramsize),
+#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \
+ || defined(CONFIG_E500)
+ BDM(immr_base),
+#endif
+#if defined(CONFIG_MPC5xxx)
+ BDM(mbar_base),
+#endif
+#if defined(CONFIG_MPC83XX)
+ BDM(immrbar),
+#endif
+#if defined(CONFIG_MPC8220)
+ BDM(mbar_base),
+ BDM(inpfreq),
+ BDM(pcifreq),
+ BDM(pevfreq),
+ BDM(flbfreq),
+ BDM(vcofreq),
+#endif
+ BDM(bootflags),
+ BDM(ip_addr),
+ BDM(intfreq),
+ BDM(busfreq),
+#ifdef CONFIG_CPM2
+ BDM(cpmfreq),
+ BDM(brgfreq),
+ BDM(sccfreq),
+ BDM(vco),
+#endif
+#if defined(CONFIG_MPC5xxx)
+ BDM(ipbfreq),
+ BDM(pcifreq),
+#endif
+ BDM(baudrate),
+};
+
+
+int fdt_bd_t(void *fdt)
+{
+ bd_t *bd = gd->bd;
+ int nodeoffset;
+ int err;
+ u32 tmp; /* used to set 32 bit integer properties */
+ int i;
+
+ err = fdt_check_header(fdt);
+ if (err < 0) {
+ printf("libfdt: %s\n", fdt_strerror(err));
+ return err;
+ }
+
+ /*
+ * See if we already have a "bd_t" node, delete it if so.
+ * Then create a new empty node.
+ */
+ nodeoffset = fdt_path_offset (fdt, "/bd_t");
+ if (nodeoffset >= 0) {
+ err = fdt_del_node(fdt, nodeoffset);
+ if (err < 0) {
+ printf("libfdt: %s\n", fdt_strerror(err));
+ return err;
+ }
+ }
+ /*
+ * Create a new node "/bd_t" (offset 0 is root level)
+ */
+ nodeoffset = fdt_add_subnode(fdt, 0, "bd_t");
+ if (nodeoffset < 0) {
+ printf("libfdt: %s\n", fdt_strerror(nodeoffset));
+ return nodeoffset;
+ }
+ /*
+ * Use the string/pointer structure to create the entries...
+ */
+ for (i = 0; i < sizeof(bd_map)/sizeof(bd_map[0]); i++) {
+ tmp = cpu_to_be32(getenv("bootargs"));
+ err = fdt_setprop(fdt, nodeoffset, bd_map[i].name, &tmp, sizeof(tmp));
+ if (err < 0)
+ printf("libfdt: %s\n", fdt_strerror(err));
+ }
+ /*
+ * Add a couple of oddball entries...
+ */
+ err = fdt_setprop(fdt, nodeoffset, "enetaddr", &bd->bi_enetaddr, 6);
+ if (err < 0)
+ printf("libfdt: %s\n", fdt_strerror(err));
+ err = fdt_setprop(fdt, nodeoffset, "ethspeed", &bd->bi_ethspeed, 4);
+ if (err < 0)
+ printf("libfdt: %s\n", fdt_strerror(err));
+
+ return 0;
+}
+#endif /* ifdef CONFIG_OF_HAS_BD_T */
+
+#endif /* CONFIG_OF_LIBFDT */
diff --git a/common/main.c b/common/main.c
index cc4b50f..09ee64b 100644
--- a/common/main.c
+++ b/common/main.c
@@ -112,14 +112,6 @@
u_int presskey_max = 0;
u_int i;
-#ifdef CONFIG_SILENT_CONSOLE
- if (gd->flags & GD_FLG_SILENT) {
- /* Restore serial console */
- console_assign (stdout, "serial");
- console_assign (stderr, "serial");
- }
-#endif
-
# ifdef CONFIG_AUTOBOOT_PROMPT
printf (CONFIG_AUTOBOOT_PROMPT, bootdelay);
# endif
@@ -199,14 +191,8 @@
# endif
#ifdef CONFIG_SILENT_CONSOLE
- if (abort) {
- /* permanently enable normal console output */
- gd->flags &= ~(GD_FLG_SILENT);
- } else if (gd->flags & GD_FLG_SILENT) {
- /* Restore silent console */
- console_assign (stdout, "nulldev");
- console_assign (stderr, "nulldev");
- }
+ if (abort)
+ gd->flags &= ~GD_FLG_SILENT;
#endif
return abort;
@@ -222,14 +208,6 @@
{
int abort = 0;
-#ifdef CONFIG_SILENT_CONSOLE
- if (gd->flags & GD_FLG_SILENT) {
- /* Restore serial console */
- console_assign (stdout, "serial");
- console_assign (stderr, "serial");
- }
-#endif
-
#ifdef CONFIG_MENUPROMPT
printf(CONFIG_MENUPROMPT, bootdelay);
#else
@@ -245,7 +223,7 @@
if (tstc()) { /* we got a key press */
(void) getc(); /* consume input */
puts ("\b\b\b 0");
- abort = 1; /* don't auto boot */
+ abort = 1; /* don't auto boot */
}
}
#endif
@@ -275,14 +253,8 @@
putc ('\n');
#ifdef CONFIG_SILENT_CONSOLE
- if (abort) {
- /* permanently enable normal console output */
- gd->flags &= ~(GD_FLG_SILENT);
- } else if (gd->flags & GD_FLG_SILENT) {
- /* Restore silent console */
- console_assign (stdout, "nulldev");
- console_assign (stderr, "nulldev");
- }
+ if (abort)
+ gd->flags &= ~GD_FLG_SILENT;
#endif
return abort;
@@ -1219,6 +1191,8 @@
if (outputcnt)
*output = 0;
+ else
+ *(output - 1) = 0;
#ifdef DEBUG_PARSER
printf ("[PROCESS_MACROS] OUTPUT len %d: \"%s\"\n",
diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c
index f4e5fc5..9c8998b 100644
--- a/cpu/74xx_7xx/cpu.c
+++ b/cpu/74xx_7xx/cpu.c
@@ -44,6 +44,10 @@
#include <74xx_7xx.h>
#include <asm/cache.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
#ifdef CONFIG_AMIGAONEG3SE
#include "../board/MAI/AmigaOneG3SE/via686.h"
#include "../board/MAI/AmigaOneG3SE/memio.h"
@@ -101,6 +105,10 @@
type = CPU_7457;
break;
+ case 0x8003:
+ type = CPU_7447A;
+ break;
+
case 0x8004:
type = CPU_7448;
break;
@@ -156,6 +164,10 @@
str = "MPC7410";
break;
+ case CPU_7447A:
+ str = "MPC7447A";
+ break;
+
case CPU_7448:
str = "MPC7448";
break;
@@ -264,20 +276,19 @@
/*
* For the 7400 the TB clock runs at 1/4 the cpu bus speed.
*/
-#ifdef CONFIG_AMIGAONEG3SE
+#if defined(CONFIG_AMIGAONEG3SE) || defined(CFG_CONFIG_BUS_CLK)
unsigned long get_tbclk(void)
{
return (gd->bus_clk / 4);
}
-#else /* ! CONFIG_AMIGAONEG3SE */
+#else /* ! CONFIG_AMIGAONEG3SE and !CFG_CONFIG_BUS_CLK*/
unsigned long get_tbclk (void)
{
return CFG_BUS_HZ / 4;
}
-#endif /* CONFIG_AMIGAONEG3SE */
+#endif /* CONFIG_AMIGAONEG3SE or CFG_CONFIG_BUS_CLK*/
/* ------------------------------------------------------------------------- */
-
#if defined(CONFIG_WATCHDOG)
#if !defined(CONFIG_PCIPPC2) && !defined(CONFIG_BAB7xx)
void
@@ -289,3 +300,30 @@
#endif /* CONFIG_WATCHDOG */
/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_cpu_setup (void *blob, bd_t *bd)
+{
+ u32 *p;
+ ulong clock;
+ int len;
+
+ clock = bd->bi_busfreq;
+
+ p = ft_get_prop (blob, "/cpus/" OF_CPU "/bus-frequency", &len);
+ if (p != NULL)
+ *p = cpu_to_be32 (clock);
+
+#if defined(CONFIG_TSI108_ETH)
+ p = ft_get_prop (blob, "/" OF_TSI "/ethernet@6200/address", &len);
+ memcpy (p, bd->bi_enetaddr, 6);
+#endif
+
+#if defined(CONFIG_HAS_ETH1)
+ p = ft_get_prop (blob, "/" OF_TSI "/ethernet@6600/address", &len);
+ memcpy (p, bd->bi_enet1addr, 6);
+#endif
+}
+#endif
+/* ------------------------------------------------------------------------- */
diff --git a/cpu/74xx_7xx/cpu_init.c b/cpu/74xx_7xx/cpu_init.c
index e02a4cc..1dd1b2c 100644
--- a/cpu/74xx_7xx/cpu_init.c
+++ b/cpu/74xx_7xx/cpu_init.c
@@ -43,6 +43,7 @@
case CPU_7450:
case CPU_7455:
case CPU_7457:
+ case CPU_7447A:
case CPU_7448:
/* enable the timebase bit in HID0 */
set_hid0(get_hid0() | 0x4000000);
diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c
index d1800ed..d8c40ce 100644
--- a/cpu/74xx_7xx/speed.c
+++ b/cpu/74xx_7xx/speed.c
@@ -31,6 +31,8 @@
DECLARE_GLOBAL_DATA_PTR;
+extern unsigned long get_board_bus_clk (void);
+
static const int hid1_multipliers_x_10[] = {
25, /* 0000 - 2.5x */
75, /* 0001 - 7.5x */
@@ -50,6 +52,42 @@
0 /* 1111 - off */
};
+/* PLL_CFG[0:4] table for cpu 7448/7447A/7455/7457 */
+static const int hid1_74xx_multipliers_x_10[] = {
+ 115, /* 00000 - 11.5x */
+ 170, /* 00001 - 17x */
+ 75, /* 00010 - 7.5x */
+ 150, /* 00011 - 15x */
+ 70, /* 00100 - 7x */
+ 180, /* 00101 - 18x */
+ 10, /* 00110 - bypass */
+ 200, /* 00111 - 20x */
+ 20, /* 01000 - 2x */
+ 210, /* 01001 - 21x */
+ 65, /* 01010 - 6.5x */
+ 130, /* 01011 - 13x */
+ 85, /* 01100 - 8.5x */
+ 240, /* 01101 - 24x */
+ 95, /* 01110 - 9.5x */
+ 90, /* 01111 - 9x */
+ 30, /* 10000 - 3x */
+ 105, /* 10001 - 10.5x */
+ 55, /* 10010 - 5.5x */
+ 110, /* 10011 - 11x */
+ 40, /* 10100 - 4x */
+ 100, /* 10101 - 10x */
+ 50, /* 10110 - 5x */
+ 120, /* 10111 - 12x */
+ 80, /* 11000 - 8x */
+ 140, /* 11001 - 14x */
+ 60, /* 11010 - 6x */
+ 160, /* 11011 - 16x */
+ 135, /* 11100 - 13.5x */
+ 280, /* 11101 - 28x */
+ 0, /* 11110 - off */
+ 125 /* 11111 - 12.5x */
+};
+
static const int hid1_fx_multipliers_x_10[] = {
00, /* 0000 - off */
00, /* 0001 - off */
@@ -89,22 +127,30 @@
{
ulong clock = 0;
+#ifdef CFG_BUS_CLK
+ gd->bus_clk = CFG_BUS_CLK; /* bus clock is a fixed frequency */
+#else
+ gd->bus_clk = get_board_bus_clk (); /* bus clock is configurable */
+#endif
+
/* calculate the clock frequency based upon the CPU type */
switch (get_cpu_type()) {
+ case CPU_7447A:
case CPU_7448:
case CPU_7455:
case CPU_7457:
/*
- * It is assumed that the PLL_EXT line is zero.
* Make sure division is done before multiplication to prevent 32-bit
* arithmetic overflows which will cause a negative number
*/
- clock = (CFG_BUS_CLK / 10) * hid1_multipliers_x_10[(get_hid1 () >> 13) & 0xF];
+ clock = (gd->bus_clk / 10) *
+ hid1_74xx_multipliers_x_10[(get_hid1 () >> 12) & 0x1F];
break;
case CPU_750GX:
case CPU_750FX:
- clock = CFG_BUS_CLK * hid1_fx_multipliers_x_10[get_hid1 () >> 27] / 10;
+ clock = gd->bus_clk *
+ hid1_fx_multipliers_x_10[get_hid1 () >> 27] / 10;
break;
case CPU_7450:
@@ -121,7 +167,8 @@
* Make sure division is done before multiplication to prevent 32-bit
* arithmetic overflows which will cause a negative number
*/
- clock = (CFG_BUS_CLK / 10) * hid1_multipliers_x_10[get_hid1 () >> 28];
+ clock = (gd->bus_clk / 10) *
+ hid1_multipliers_x_10[get_hid1 () >> 28];
break;
case CPU_UNKNOWN:
@@ -131,7 +178,6 @@
}
gd->cpu_clk = clock;
- gd->bus_clk = CFG_BUS_CLK;
return (0);
}
diff --git a/cpu/at32ap/Makefile b/cpu/at32ap/Makefile
index f62ec8b..f69b1f3 100644
--- a/cpu/at32ap/Makefile
+++ b/cpu/at32ap/Makefile
@@ -30,7 +30,7 @@
START := start.o
SOBJS := entry.o
COBJS := cpu.o hsdramc.o exception.o cache.o
-COBJS += interrupts.o device.o pm.o pio.o
+COBJS += interrupts.o pio.o atmel_mci.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
START := $(addprefix $(obj),$(START))
diff --git a/cpu/at32ap/at32ap7000/Makefile b/cpu/at32ap/at32ap7000/Makefile
index 2ed74d2..d276712 100644
--- a/cpu/at32ap/at32ap7000/Makefile
+++ b/cpu/at32ap/at32ap7000/Makefile
@@ -24,7 +24,7 @@
LIB := $(obj)lib$(SOC).a
-COBJS := hebi.o devices.o
+COBJS := gpio.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/at32ap/at32ap7000/devices.c b/cpu/at32ap/at32ap7000/devices.c
deleted file mode 100644
index 8b216e9..0000000
--- a/cpu/at32ap/at32ap7000/devices.c
+++ /dev/null
@@ -1,448 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-
-#include <asm/arch/memory-map.h>
-#include <asm/arch/platform.h>
-
-#include "../sm.h"
-
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
-const struct clock_domain chip_clock[] = {
- [CLOCK_CPU] = {
- .reg = SM_PM_CPU_MASK,
- .id = CLOCK_CPU,
- .bridge = NO_DEVICE,
- },
- [CLOCK_HSB] = {
- .reg = SM_PM_HSB_MASK,
- .id = CLOCK_HSB,
- .bridge = NO_DEVICE,
- },
- [CLOCK_PBA] = {
- .reg = SM_PM_PBA_MASK,
- .id = CLOCK_PBA,
- .bridge = DEVICE_PBA_BRIDGE,
- },
- [CLOCK_PBB] = {
- .reg = SM_PM_PBB_MASK,
- .id = CLOCK_PBB,
- .bridge = DEVICE_PBB_BRIDGE,
- },
-};
-
-static const struct resource hebi_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_HSB, 0 },
- },
- }, {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBB, 13 },
- },
- }, {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBB, 14 },
- },
- }, {
- .type = RESOURCE_GPIO,
- .u = {
- .gpio = { 27, DEVICE_PIOE, GPIO_FUNC_A, 0 },
- },
- },
-};
-static const struct resource pba_bridge_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_HSB, 1 },
- }
- }, {
- .type = RESOURCE_CLOCK,
- .u = {
- /* HSB-HSB Bridge */
- .clock = { CLOCK_HSB, 4 },
- },
- },
-};
-static const struct resource pbb_bridge_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_HSB, 2 },
- },
- },
-};
-static const struct resource hramc_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_HSB, 3 },
- },
- },
-};
-static const struct resource pioa_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBA, 10 },
- },
- },
-};
-static const struct resource piob_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBA, 11 },
- },
- },
-};
-static const struct resource pioc_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBA, 12 },
- },
- },
-};
-static const struct resource piod_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBA, 13 },
- },
- },
-};
-static const struct resource pioe_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBA, 14 },
- },
- },
-};
-static const struct resource sm_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBB, 0 },
- },
- },
-};
-static const struct resource intc_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBB, 1 },
- },
- },
-};
-static const struct resource hmatrix_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBB, 2 },
- },
- },
-};
-#if defined(CFG_HPDC)
-static const struct resource hpdc_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBA, 16 },
- },
- },
-};
-#endif
-#if defined(CFG_MACB0)
-static const struct resource macb0_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_HSB, 8 },
- },
- }, {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBB, 6 },
- },
- }, {
- .type = RESOURCE_GPIO,
- .u = {
- .gpio = { 19, DEVICE_PIOC, GPIO_FUNC_A, 0 },
- },
- },
-};
-#endif
-#if defined(CFG_MACB1)
-static const struct resource macb1_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_HSB, 9 },
- },
- }, {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBB, 7 },
- },
- }, {
- .type = RESOURCE_GPIO,
- .u = {
- .gpio = { 12, DEVICE_PIOC, GPIO_FUNC_B, 19 },
- },
- }, {
- .type = RESOURCE_GPIO,
- .u = {
- .gpio = { 14, DEVICE_PIOD, GPIO_FUNC_B, 2 },
- },
- },
-};
-#endif
-#if defined(CFG_LCDC)
-static const struct resource lcdc_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_HSB, 7 },
- },
- },
-};
-#endif
-#if defined(CFG_USART0)
-static const struct resource usart0_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBA, 3 },
- },
- }, {
- .type = RESOURCE_GPIO,
- .u = {
- .gpio = { 2, DEVICE_PIOA, GPIO_FUNC_B, 8 },
- },
- },
-};
-#endif
-#if defined(CFG_USART1)
-static const struct resource usart1_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBA, 4 },
- },
- }, {
- .type = RESOURCE_GPIO,
- .u = {
- .gpio = { 2, DEVICE_PIOA, GPIO_FUNC_A, 17 },
- },
- },
-};
-#endif
-#if defined(CFG_USART2)
-static const struct resource usart2_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBA, 5 },
- },
- }, {
- .type = RESOURCE_GPIO,
- .u = {
- .gpio = { 2, DEVICE_PIOB, GPIO_FUNC_B, 26 },
- },
- },
-};
-#endif
-#if defined(CFG_USART3)
-static const struct resource usart3_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBA, 6 },
- },
- }, {
- .type = RESOURCE_GPIO,
- .u = {
- .gpio = { 2, DEVICE_PIOB, GPIO_FUNC_B, 17 },
- },
- },
-};
-#endif
-#if defined(CFG_MMCI)
-static const struct resource mmci_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_PBB, 9 },
- },
- }, {
- .type = RESOURCE_GPIO,
- .u = {
- .gpio = { 6, DEVICE_PIOA, GPIO_FUNC_A, 10 },
- },
- },
-};
-#endif
-#if defined(CFG_DMAC)
-static const struct resource dmac_resource[] = {
- {
- .type = RESOURCE_CLOCK,
- .u = {
- .clock = { CLOCK_HSB, 10 },
- },
- },
-};
-#endif
-
-const struct device chip_device[] = {
- [DEVICE_HEBI] = {
- .regs = (void *)HSMC_BASE,
- .nr_resources = ARRAY_SIZE(hebi_resource),
- .resource = hebi_resource,
- },
- [DEVICE_PBA_BRIDGE] = {
- .nr_resources = ARRAY_SIZE(pba_bridge_resource),
- .resource = pba_bridge_resource,
- },
- [DEVICE_PBB_BRIDGE] = {
- .nr_resources = ARRAY_SIZE(pbb_bridge_resource),
- .resource = pbb_bridge_resource,
- },
- [DEVICE_HRAMC] = {
- .nr_resources = ARRAY_SIZE(hramc_resource),
- .resource = hramc_resource,
- },
- [DEVICE_PIOA] = {
- .regs = (void *)PIOA_BASE,
- .nr_resources = ARRAY_SIZE(pioa_resource),
- .resource = pioa_resource,
- },
- [DEVICE_PIOB] = {
- .regs = (void *)PIOB_BASE,
- .nr_resources = ARRAY_SIZE(piob_resource),
- .resource = piob_resource,
- },
- [DEVICE_PIOC] = {
- .regs = (void *)PIOC_BASE,
- .nr_resources = ARRAY_SIZE(pioc_resource),
- .resource = pioc_resource,
- },
- [DEVICE_PIOD] = {
- .regs = (void *)PIOD_BASE,
- .nr_resources = ARRAY_SIZE(piod_resource),
- .resource = piod_resource,
- },
- [DEVICE_PIOE] = {
- .regs = (void *)PIOE_BASE,
- .nr_resources = ARRAY_SIZE(pioe_resource),
- .resource = pioe_resource,
- },
- [DEVICE_SM] = {
- .regs = (void *)SM_BASE,
- .nr_resources = ARRAY_SIZE(sm_resource),
- .resource = sm_resource,
- },
- [DEVICE_INTC] = {
- .regs = (void *)INTC_BASE,
- .nr_resources = ARRAY_SIZE(intc_resource),
- .resource = intc_resource,
- },
- [DEVICE_HMATRIX] = {
- .regs = (void *)HMATRIX_BASE,
- .nr_resources = ARRAY_SIZE(hmatrix_resource),
- .resource = hmatrix_resource,
- },
-#if defined(CFG_HPDC)
- [DEVICE_HPDC] = {
- .nr_resources = ARRAY_SIZE(hpdc_resource),
- .resource = hpdc_resource,
- },
-#endif
-#if defined(CFG_MACB0)
- [DEVICE_MACB0] = {
- .regs = (void *)MACB0_BASE,
- .nr_resources = ARRAY_SIZE(macb0_resource),
- .resource = macb0_resource,
- },
-#endif
-#if defined(CFG_MACB1)
- [DEVICE_MACB1] = {
- .regs = (void *)MACB1_BASE,
- .nr_resources = ARRAY_SIZE(macb1_resource),
- .resource = macb1_resource,
- },
-#endif
-#if defined(CFG_LCDC)
- [DEVICE_LCDC] = {
- .nr_resources = ARRAY_SIZE(lcdc_resource),
- .resource = lcdc_resource,
- },
-#endif
-#if defined(CFG_USART0)
- [DEVICE_USART0] = {
- .regs = (void *)USART0_BASE,
- .nr_resources = ARRAY_SIZE(usart0_resource),
- .resource = usart0_resource,
- },
-#endif
-#if defined(CFG_USART1)
- [DEVICE_USART1] = {
- .regs = (void *)USART1_BASE,
- .nr_resources = ARRAY_SIZE(usart1_resource),
- .resource = usart1_resource,
- },
-#endif
-#if defined(CFG_USART2)
- [DEVICE_USART2] = {
- .regs = (void *)USART2_BASE,
- .nr_resources = ARRAY_SIZE(usart2_resource),
- .resource = usart2_resource,
- },
-#endif
-#if defined(CFG_USART3)
- [DEVICE_USART3] = {
- .regs = (void *)USART3_BASE,
- .nr_resources = ARRAY_SIZE(usart3_resource),
- .resource = usart3_resource,
- },
-#endif
-#if defined(CFG_MMCI)
- [DEVICE_MMCI] = {
- .regs = (void *)MMCI_BASE,
- .nr_resources = ARRAY_SIZE(mmci_resource),
- .resource = mmci_resource,
- },
-#endif
-#if defined(CFG_DMAC)
- [DEVICE_DMAC] = {
- .regs = (void *)DMAC_BASE,
- .nr_resources = ARRAY_SIZE(dmac_resource),
- .resource = dmac_resource,
- },
-#endif
-};
diff --git a/cpu/at32ap/at32ap7000/gpio.c b/cpu/at32ap/at32ap7000/gpio.c
new file mode 100644
index 0000000..52f5372
--- /dev/null
+++ b/cpu/at32ap/at32ap7000/gpio.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/arch/gpio.h>
+
+/*
+ * Lots of small functions here. We depend on --gc-sections getting
+ * rid of the ones we don't need.
+ */
+void gpio_enable_ebi(void)
+{
+#ifdef CFG_HSDRAMC
+#ifndef CFG_SDRAM_16BIT
+ gpio_select_periph_A(GPIO_PIN_PE0, 0);
+ gpio_select_periph_A(GPIO_PIN_PE1, 0);
+ gpio_select_periph_A(GPIO_PIN_PE2, 0);
+ gpio_select_periph_A(GPIO_PIN_PE3, 0);
+ gpio_select_periph_A(GPIO_PIN_PE4, 0);
+ gpio_select_periph_A(GPIO_PIN_PE5, 0);
+ gpio_select_periph_A(GPIO_PIN_PE6, 0);
+ gpio_select_periph_A(GPIO_PIN_PE7, 0);
+ gpio_select_periph_A(GPIO_PIN_PE8, 0);
+ gpio_select_periph_A(GPIO_PIN_PE9, 0);
+ gpio_select_periph_A(GPIO_PIN_PE10, 0);
+ gpio_select_periph_A(GPIO_PIN_PE11, 0);
+ gpio_select_periph_A(GPIO_PIN_PE12, 0);
+ gpio_select_periph_A(GPIO_PIN_PE13, 0);
+ gpio_select_periph_A(GPIO_PIN_PE14, 0);
+ gpio_select_periph_A(GPIO_PIN_PE15, 0);
+#endif
+ gpio_select_periph_A(GPIO_PIN_PE26, 0);
+#endif
+}
+
+void gpio_enable_usart0(void)
+{
+ gpio_select_periph_B(GPIO_PIN_PA8, 0);
+ gpio_select_periph_B(GPIO_PIN_PA9, 0);
+}
+
+void gpio_enable_usart1(void)
+{
+ gpio_select_periph_A(GPIO_PIN_PA17, 0);
+ gpio_select_periph_A(GPIO_PIN_PA18, 0);
+}
+
+void gpio_enable_usart2(void)
+{
+ gpio_select_periph_B(GPIO_PIN_PB26, 0);
+ gpio_select_periph_B(GPIO_PIN_PB27, 0);
+}
+
+void gpio_enable_usart3(void)
+{
+ gpio_select_periph_B(GPIO_PIN_PB18, 0);
+ gpio_select_periph_B(GPIO_PIN_PB19, 0);
+}
+
+void gpio_enable_macb0(void)
+{
+ gpio_select_periph_A(GPIO_PIN_PC3, 0); /* TXD0 */
+ gpio_select_periph_A(GPIO_PIN_PC4, 0); /* TXD1 */
+ gpio_select_periph_A(GPIO_PIN_PC7, 0); /* TXEN */
+ gpio_select_periph_A(GPIO_PIN_PC8, 0); /* TXCK */
+ gpio_select_periph_A(GPIO_PIN_PC9, 0); /* RXD0 */
+ gpio_select_periph_A(GPIO_PIN_PC10, 0); /* RXD1 */
+ gpio_select_periph_A(GPIO_PIN_PC13, 0); /* RXER */
+ gpio_select_periph_A(GPIO_PIN_PC15, 0); /* RXDV */
+ gpio_select_periph_A(GPIO_PIN_PC16, 0); /* MDC */
+ gpio_select_periph_A(GPIO_PIN_PC17, 0); /* MDIO */
+#if !defined(CONFIG_RMII)
+ gpio_select_periph_A(GPIO_PIN_PC0, 0); /* COL */
+ gpio_select_periph_A(GPIO_PIN_PC1, 0); /* CRS */
+ gpio_select_periph_A(GPIO_PIN_PC2, 0); /* TXER */
+ gpio_select_periph_A(GPIO_PIN_PC5, 0); /* TXD2 */
+ gpio_select_periph_A(GPIO_PIN_PC6, 0); /* TXD3 */
+ gpio_select_periph_A(GPIO_PIN_PC11, 0); /* RXD2 */
+ gpio_select_periph_A(GPIO_PIN_PC12, 0); /* RXD3 */
+ gpio_select_periph_A(GPIO_PIN_PC14, 0); /* RXCK */
+ gpio_select_periph_A(GPIO_PIN_PC18, 0); /* SPD */
+#endif
+}
+
+void gpio_enable_macb1(void)
+{
+ gpio_select_periph_B(GPIO_PIN_PD13, 0); /* TXD0 */
+ gpio_select_periph_B(GPIO_PIN_PD14, 0); /* TXD1 */
+ gpio_select_periph_B(GPIO_PIN_PD11, 0); /* TXEN */
+ gpio_select_periph_B(GPIO_PIN_PD12, 0); /* TXCK */
+ gpio_select_periph_B(GPIO_PIN_PD10, 0); /* RXD0 */
+ gpio_select_periph_B(GPIO_PIN_PD6, 0); /* RXD1 */
+ gpio_select_periph_B(GPIO_PIN_PD5, 0); /* RXER */
+ gpio_select_periph_B(GPIO_PIN_PD4, 0); /* RXDV */
+ gpio_select_periph_B(GPIO_PIN_PD3, 0); /* MDC */
+ gpio_select_periph_B(GPIO_PIN_PD2, 0); /* MDIO */
+#if !defined(CONFIG_RMII)
+ gpio_select_periph_B(GPIO_PIN_PC19, 0); /* COL */
+ gpio_select_periph_B(GPIO_PIN_PC23, 0); /* CRS */
+ gpio_select_periph_B(GPIO_PIN_PC26, 0); /* TXER */
+ gpio_select_periph_B(GPIO_PIN_PC27, 0); /* TXD2 */
+ gpio_select_periph_B(GPIO_PIN_PC28, 0); /* TXD3 */
+ gpio_select_periph_B(GPIO_PIN_PC29, 0); /* RXD2 */
+ gpio_select_periph_B(GPIO_PIN_PC30, 0); /* RXD3 */
+ gpio_select_periph_B(GPIO_PIN_PC24, 0); /* RXCK */
+ gpio_select_periph_B(GPIO_PIN_PD15, 0); /* SPD */
+#endif
+}
+
+void gpio_enable_mmci(void)
+{
+ gpio_select_periph_A(GPIO_PIN_PA10, 0); /* CLK */
+ gpio_select_periph_A(GPIO_PIN_PA11, 0); /* CMD */
+ gpio_select_periph_A(GPIO_PIN_PA12, 0); /* DATA0 */
+ gpio_select_periph_A(GPIO_PIN_PA13, 0); /* DATA1 */
+ gpio_select_periph_A(GPIO_PIN_PA14, 0); /* DATA2 */
+ gpio_select_periph_A(GPIO_PIN_PA15, 0); /* DATA3 */
+}
diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c
new file mode 100644
index 0000000..9f62c0f
--- /dev/null
+++ b/cpu/at32ap/atmel_mci.c
@@ -0,0 +1,477 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CONFIG_MMC
+
+#include <part.h>
+#include <mmc.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/byteorder.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
+
+#include "atmel_mci.h"
+
+#ifdef DEBUG
+#define pr_debug(fmt, args...) printf(fmt, ##args)
+#else
+#define pr_debug(...) do { } while(0)
+#endif
+
+#ifndef CFG_MMC_CLK_OD
+#define CFG_MMC_CLK_OD 150000
+#endif
+
+#ifndef CFG_MMC_CLK_PP
+#define CFG_MMC_CLK_PP 5000000
+#endif
+
+#ifndef CFG_MMC_OP_COND
+#define CFG_MMC_OP_COND 0x00100000
+#endif
+
+#define MMC_DEFAULT_BLKLEN 512
+#define MMC_DEFAULT_RCA 1
+
+static unsigned int mmc_rca;
+static block_dev_desc_t mmc_blkdev;
+
+block_dev_desc_t *mmc_get_dev(int dev)
+{
+ return &mmc_blkdev;
+}
+
+static void mci_set_mode(unsigned long hz, unsigned long blklen)
+{
+ unsigned long bus_hz;
+ unsigned long clkdiv;
+
+ bus_hz = get_mci_clk_rate();
+ clkdiv = (bus_hz / hz) / 2 - 1;
+
+ pr_debug("mmc: setting clock %lu Hz, block size %lu\n",
+ hz, blklen);
+
+ if (clkdiv & ~255UL) {
+ clkdiv = 255;
+ printf("mmc: clock %lu too low; setting CLKDIV to 255\n",
+ hz);
+ }
+
+ blklen &= 0xfffc;
+ mmci_writel(MR, (MMCI_BF(CLKDIV, clkdiv)
+ | MMCI_BF(BLKLEN, blklen)));
+}
+
+#define RESP_NO_CRC 1
+#define R1 MMCI_BF(RSPTYP, 1)
+#define R2 MMCI_BF(RSPTYP, 2)
+#define R3 (R1 | RESP_NO_CRC)
+#define R6 R1
+#define NID MMCI_BF(MAXLAT, 0)
+#define NCR MMCI_BF(MAXLAT, 1)
+#define TRCMD_START MMCI_BF(TRCMD, 1)
+#define TRDIR_READ MMCI_BF(TRDIR, 1)
+#define TRTYP_BLOCK MMCI_BF(TRTYP, 0)
+#define INIT_CMD MMCI_BF(SPCMD, 1)
+#define OPEN_DRAIN MMCI_BF(OPDCMD, 1)
+
+#define ERROR_FLAGS (MMCI_BIT(DTOE) \
+ | MMCI_BIT(RDIRE) \
+ | MMCI_BIT(RENDE) \
+ | MMCI_BIT(RINDE) \
+ | MMCI_BIT(RTOE))
+
+static int
+mmc_cmd(unsigned long cmd, unsigned long arg,
+ void *resp, unsigned long flags)
+{
+ unsigned long *response = resp;
+ int i, response_words = 0;
+ unsigned long error_flags;
+ u32 status;
+
+ pr_debug("mmc: CMD%lu 0x%lx (flags 0x%lx)\n",
+ cmd, arg, flags);
+
+ error_flags = ERROR_FLAGS;
+ if (!(flags & RESP_NO_CRC))
+ error_flags |= MMCI_BIT(RCRCE);
+
+ flags &= ~MMCI_BF(CMDNB, ~0UL);
+
+ if (MMCI_BFEXT(RSPTYP, flags) == MMCI_RSPTYP_48_BIT_RESP)
+ response_words = 1;
+ else if (MMCI_BFEXT(RSPTYP, flags) == MMCI_RSPTYP_136_BIT_RESP)
+ response_words = 4;
+
+ mmci_writel(ARGR, arg);
+ mmci_writel(CMDR, cmd | flags);
+ do {
+ udelay(40);
+ status = mmci_readl(SR);
+ } while (!(status & MMCI_BIT(CMDRDY)));
+
+ pr_debug("mmc: status 0x%08lx\n", status);
+
+ if (status & ERROR_FLAGS) {
+ printf("mmc: command %lu failed (status: 0x%08lx)\n",
+ cmd, status);
+ return -EIO;
+ }
+
+ if (response_words)
+ pr_debug("mmc: response:");
+
+ for (i = 0; i < response_words; i++) {
+ response[i] = mmci_readl(RSPR);
+ pr_debug(" %08lx", response[i]);
+ }
+ pr_debug("\n");
+
+ return 0;
+}
+
+static int mmc_acmd(unsigned long cmd, unsigned long arg,
+ void *resp, unsigned long flags)
+{
+ unsigned long aresp[4];
+ int ret;
+
+ /*
+ * Seems like the APP_CMD part of an ACMD has 64 cycles max
+ * latency even though the ACMD part doesn't. This isn't
+ * entirely clear in the SD Card spec, but some cards refuse
+ * to work if we attempt to use 5 cycles max latency here...
+ */
+ ret = mmc_cmd(MMC_CMD_APP_CMD, 0, aresp,
+ R1 | NCR | (flags & OPEN_DRAIN));
+ if (ret)
+ return ret;
+ if ((aresp[0] & (R1_ILLEGAL_COMMAND | R1_APP_CMD)) != R1_APP_CMD)
+ return -ENODEV;
+
+ ret = mmc_cmd(cmd, arg, resp, flags);
+ return ret;
+}
+
+static unsigned long
+mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
+ unsigned long *buffer)
+{
+ int ret, i = 0;
+ unsigned long resp[4];
+ unsigned long card_status, data;
+ unsigned long wordcount;
+ u32 status;
+
+ if (blkcnt == 0)
+ return 0;
+
+ pr_debug("mmc_bread: dev %d, start %lx, blkcnt %lx\n",
+ dev, start, blkcnt);
+
+ /* Put the device into Transfer state */
+ ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, R1 | NCR);
+ if (ret) goto fail;
+
+ /* Set block length */
+ ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, R1 | NCR);
+ if (ret) goto fail;
+
+ pr_debug("MCI_DTOR = %08lx\n", mmci_readl(DTOR));
+
+ for (i = 0; i < blkcnt; i++, start++) {
+ ret = mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK,
+ start * mmc_blkdev.blksz, resp,
+ (R1 | NCR | TRCMD_START | TRDIR_READ
+ | TRTYP_BLOCK));
+ if (ret) goto fail;
+
+ ret = -EIO;
+ wordcount = 0;
+ do {
+ do {
+ status = mmci_readl(SR);
+ if (status & (ERROR_FLAGS | MMCI_BIT(OVRE)))
+ goto fail;
+ } while (!(status & MMCI_BIT(RXRDY)));
+
+ if (status & MMCI_BIT(RXRDY)) {
+ data = mmci_readl(RDR);
+ /* pr_debug("%x\n", data); */
+ *buffer++ = data;
+ wordcount++;
+ }
+ } while(wordcount < (512 / 4));
+
+ pr_debug("mmc: read %u words, waiting for BLKE\n", wordcount);
+
+ do {
+ status = mmci_readl(SR);
+ } while (!(status & MMCI_BIT(BLKE)));
+
+ putc('.');
+ }
+
+out:
+ /* Put the device back into Standby state */
+ mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, NCR);
+ return i;
+
+fail:
+ mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR);
+ printf("mmc: bread failed, card status = ", card_status);
+ goto out;
+}
+
+static void mmc_parse_cid(struct mmc_cid *cid, unsigned long *resp)
+{
+ cid->mid = resp[0] >> 24;
+ cid->oid = (resp[0] >> 8) & 0xffff;
+ cid->pnm[0] = resp[0];
+ cid->pnm[1] = resp[1] >> 24;
+ cid->pnm[2] = resp[1] >> 16;
+ cid->pnm[3] = resp[1] >> 8;
+ cid->pnm[4] = resp[1];
+ cid->pnm[5] = resp[2] >> 24;
+ cid->pnm[6] = 0;
+ cid->prv = resp[2] >> 16;
+ cid->psn = (resp[2] << 16) | (resp[3] >> 16);
+ cid->mdt = resp[3] >> 8;
+}
+
+static void sd_parse_cid(struct mmc_cid *cid, unsigned long *resp)
+{
+ cid->mid = resp[0] >> 24;
+ cid->oid = (resp[0] >> 8) & 0xffff;
+ cid->pnm[0] = resp[0];
+ cid->pnm[1] = resp[1] >> 24;
+ cid->pnm[2] = resp[1] >> 16;
+ cid->pnm[3] = resp[1] >> 8;
+ cid->pnm[4] = resp[1];
+ cid->pnm[5] = 0;
+ cid->pnm[6] = 0;
+ cid->prv = resp[2] >> 24;
+ cid->psn = (resp[2] << 8) | (resp[3] >> 24);
+ cid->mdt = (resp[3] >> 8) & 0x0fff;
+}
+
+static void mmc_dump_cid(const struct mmc_cid *cid)
+{
+ printf("Manufacturer ID: %02lX\n", cid->mid);
+ printf("OEM/Application ID: %04lX\n", cid->oid);
+ printf("Product name: %s\n", cid->pnm);
+ printf("Product Revision: %lu.%lu\n",
+ cid->prv >> 4, cid->prv & 0x0f);
+ printf("Product Serial Number: %lu\n", cid->psn);
+ printf("Manufacturing Date: %02lu/%02lu\n",
+ cid->mdt >> 4, cid->mdt & 0x0f);
+}
+
+static void mmc_dump_csd(const struct mmc_csd *csd)
+{
+ unsigned long *csd_raw = (unsigned long *)csd;
+ printf("CSD data: %08lx %08lx %08lx %08lx\n",
+ csd_raw[0], csd_raw[1], csd_raw[2], csd_raw[3]);
+ printf("CSD structure version: 1.%u\n", csd->csd_structure);
+ printf("MMC System Spec version: %u\n", csd->spec_vers);
+ printf("Card command classes: %03x\n", csd->ccc);
+ printf("Read block length: %u\n", 1 << csd->read_bl_len);
+ if (csd->read_bl_partial)
+ puts("Supports partial reads\n");
+ else
+ puts("Does not support partial reads\n");
+ printf("Write block length: %u\n", 1 << csd->write_bl_len);
+ if (csd->write_bl_partial)
+ puts("Supports partial writes\n");
+ else
+ puts("Does not support partial writes\n");
+ if (csd->wp_grp_enable)
+ printf("Supports group WP: %u\n", csd->wp_grp_size + 1);
+ else
+ puts("Does not support group WP\n");
+ printf("Card capacity: %u bytes\n",
+ (csd->c_size + 1) * (1 << (csd->c_size_mult + 2)) *
+ (1 << csd->read_bl_len));
+ printf("File format: %u/%u\n",
+ csd->file_format_grp, csd->file_format);
+ puts("Write protection: ");
+ if (csd->perm_write_protect)
+ puts(" permanent");
+ if (csd->tmp_write_protect)
+ puts(" temporary");
+ putc('\n');
+}
+
+static int mmc_idle_cards(void)
+{
+ int ret;
+
+ /* Reset and initialize all cards */
+ ret = mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, NULL, 0);
+ if (ret)
+ return ret;
+
+ /* Keep the bus idle for 74 clock cycles */
+ return mmc_cmd(0, 0, NULL, INIT_CMD);
+}
+
+static int sd_init_card(struct mmc_cid *cid, int verbose)
+{
+ unsigned long resp[4];
+ int i, ret = 0;
+
+ mmc_idle_cards();
+ for (i = 0; i < 1000; i++) {
+ ret = mmc_acmd(MMC_ACMD_SD_SEND_OP_COND, CFG_MMC_OP_COND,
+ resp, R3 | NID);
+ if (ret || (resp[0] & 0x80000000))
+ break;
+ ret = -ETIMEDOUT;
+ }
+
+ if (ret)
+ return ret;
+
+ ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, R2 | NID);
+ if (ret)
+ return ret;
+ sd_parse_cid(cid, resp);
+ if (verbose)
+ mmc_dump_cid(cid);
+
+ /* Get RCA of the card that responded */
+ ret = mmc_cmd(MMC_CMD_SD_SEND_RELATIVE_ADDR, 0, resp, R6 | NCR);
+ if (ret)
+ return ret;
+
+ mmc_rca = resp[0] >> 16;
+ if (verbose)
+ printf("SD Card detected (RCA %u)\n", mmc_rca);
+ return 0;
+}
+
+static int mmc_init_card(struct mmc_cid *cid, int verbose)
+{
+ unsigned long resp[4];
+ int i, ret = 0;
+
+ mmc_idle_cards();
+ for (i = 0; i < 1000; i++) {
+ ret = mmc_cmd(MMC_CMD_SEND_OP_COND, CFG_MMC_OP_COND, resp,
+ R3 | NID | OPEN_DRAIN);
+ if (ret || (resp[0] & 0x80000000))
+ break;
+ ret = -ETIMEDOUT;
+ }
+
+ if (ret)
+ return ret;
+
+ /* Get CID of all cards. FIXME: Support more than one card */
+ ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, R2 | NID | OPEN_DRAIN);
+ if (ret)
+ return ret;
+ mmc_parse_cid(cid, resp);
+ if (verbose)
+ mmc_dump_cid(cid);
+
+ /* Set Relative Address of the card that responded */
+ ret = mmc_cmd(MMC_CMD_SET_RELATIVE_ADDR, mmc_rca << 16, resp,
+ R1 | NCR | OPEN_DRAIN);
+ return ret;
+}
+
+int mmc_init(int verbose)
+{
+ struct mmc_cid cid;
+ struct mmc_csd csd;
+ int ret;
+
+ /* Initialize controller */
+ mmci_writel(CR, MMCI_BIT(SWRST));
+ mmci_writel(CR, MMCI_BIT(MCIEN));
+ mmci_writel(DTOR, 0x5f);
+ mmci_writel(IDR, ~0UL);
+ mci_set_mode(CFG_MMC_CLK_OD, MMC_DEFAULT_BLKLEN);
+
+ ret = sd_init_card(&cid, verbose);
+ if (ret) {
+ mmc_rca = MMC_DEFAULT_RCA;
+ ret = mmc_init_card(&cid, verbose);
+ }
+ if (ret)
+ return ret;
+
+ /* Get CSD from the card */
+ ret = mmc_cmd(MMC_CMD_SEND_CSD, mmc_rca << 16, &csd, R2 | NCR);
+ if (ret)
+ return ret;
+ if (verbose)
+ mmc_dump_csd(&csd);
+
+ /* Initialize the blockdev structure */
+ mmc_blkdev.if_type = IF_TYPE_MMC;
+ mmc_blkdev.part_type = PART_TYPE_DOS;
+ mmc_blkdev.block_read = mmc_bread;
+ sprintf((char *)mmc_blkdev.vendor,
+ "Man %02x%04x Snr %08x",
+ cid.mid, cid.oid, cid.psn);
+ strncpy((char *)mmc_blkdev.product, cid.pnm,
+ sizeof(mmc_blkdev.product));
+ sprintf((char *)mmc_blkdev.revision, "%x %x",
+ cid.prv >> 4, cid.prv & 0x0f);
+ mmc_blkdev.blksz = 1 << csd.read_bl_len;
+ mmc_blkdev.lba = (csd.c_size + 1) * (1 << (csd.c_size_mult + 2));
+
+ mci_set_mode(CFG_MMC_CLK_PP, mmc_blkdev.blksz);
+
+#if 0
+ if (fat_register_device(&mmc_blkdev, 1))
+ printf("Could not register MMC fat device\n");
+#else
+ init_part(&mmc_blkdev);
+#endif
+
+ return 0;
+}
+
+int mmc_read(ulong src, uchar *dst, int size)
+{
+ return -ENOSYS;
+}
+
+int mmc_write(uchar *src, ulong dst, int size)
+{
+ return -ENOSYS;
+}
+
+int mmc2info(ulong addr)
+{
+ return 0;
+}
+
+#endif /* CONFIG_MMC */
diff --git a/cpu/at32ap/atmel_mci.h b/cpu/at32ap/atmel_mci.h
new file mode 100644
index 0000000..0ffbc4f
--- /dev/null
+++ b/cpu/at32ap/atmel_mci.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CPU_AT32AP_ATMEL_MCI_H__
+#define __CPU_AT32AP_ATMEL_MCI_H__
+
+/* Atmel MultiMedia Card Interface (MCI) registers */
+#define MMCI_CR 0x0000
+#define MMCI_MR 0x0004
+#define MMCI_DTOR 0x0008
+#define MMCI_SDCR 0x000c
+#define MMCI_ARGR 0x0010
+#define MMCI_CMDR 0x0014
+#define MMCI_RSPR 0x0020
+#define MMCI_RSPR1 0x0024
+#define MMCI_RSPR2 0x0028
+#define MMCI_RSPR3 0x002c
+#define MMCI_RDR 0x0030
+#define MMCI_TDR 0x0034
+#define MMCI_SR 0x0040
+#define MMCI_IER 0x0044
+#define MMCI_IDR 0x0048
+#define MMCI_IMR 0x004c
+
+/* Bitfields in CR */
+#define MMCI_MCIEN_OFFSET 0
+#define MMCI_MCIEN_SIZE 1
+#define MMCI_MCIDIS_OFFSET 1
+#define MMCI_MCIDIS_SIZE 1
+#define MMCI_PWSEN_OFFSET 2
+#define MMCI_PWSEN_SIZE 1
+#define MMCI_PWSDIS_OFFSET 3
+#define MMCI_PWSDIS_SIZE 1
+#define MMCI_SWRST_OFFSET 7
+#define MMCI_SWRST_SIZE 1
+
+/* Bitfields in MR */
+#define MMCI_CLKDIV_OFFSET 0
+#define MMCI_CLKDIV_SIZE 8
+#define MMCI_PWSDIV_OFFSET 8
+#define MMCI_PWSDIV_SIZE 3
+#define MMCI_PDCPADV_OFFSET 14
+#define MMCI_PDCPADV_SIZE 1
+#define MMCI_PDCMODE_OFFSET 15
+#define MMCI_PDCMODE_SIZE 1
+#define MMCI_BLKLEN_OFFSET 16
+#define MMCI_BLKLEN_SIZE 16
+
+/* Bitfields in DTOR */
+#define MMCI_DTOCYC_OFFSET 0
+#define MMCI_DTOCYC_SIZE 4
+#define MMCI_DTOMUL_OFFSET 4
+#define MMCI_DTOMUL_SIZE 3
+
+/* Bitfields in SDCR */
+#define MMCI_SCDSEL_OFFSET 0
+#define MMCI_SCDSEL_SIZE 4
+#define MMCI_SCDBUS_OFFSET 7
+#define MMCI_SCDBUS_SIZE 1
+
+/* Bitfields in ARGR */
+#define MMCI_ARG_OFFSET 0
+#define MMCI_ARG_SIZE 32
+
+/* Bitfields in CMDR */
+#define MMCI_CMDNB_OFFSET 0
+#define MMCI_CMDNB_SIZE 6
+#define MMCI_RSPTYP_OFFSET 6
+#define MMCI_RSPTYP_SIZE 2
+#define MMCI_SPCMD_OFFSET 8
+#define MMCI_SPCMD_SIZE 3
+#define MMCI_OPDCMD_OFFSET 11
+#define MMCI_OPDCMD_SIZE 1
+#define MMCI_MAXLAT_OFFSET 12
+#define MMCI_MAXLAT_SIZE 1
+#define MMCI_TRCMD_OFFSET 16
+#define MMCI_TRCMD_SIZE 2
+#define MMCI_TRDIR_OFFSET 18
+#define MMCI_TRDIR_SIZE 1
+#define MMCI_TRTYP_OFFSET 19
+#define MMCI_TRTYP_SIZE 2
+
+/* Bitfields in RSPRx */
+#define MMCI_RSP_OFFSET 0
+#define MMCI_RSP_SIZE 32
+
+/* Bitfields in SR/IER/IDR/IMR */
+#define MMCI_CMDRDY_OFFSET 0
+#define MMCI_CMDRDY_SIZE 1
+#define MMCI_RXRDY_OFFSET 1
+#define MMCI_RXRDY_SIZE 1
+#define MMCI_TXRDY_OFFSET 2
+#define MMCI_TXRDY_SIZE 1
+#define MMCI_BLKE_OFFSET 3
+#define MMCI_BLKE_SIZE 1
+#define MMCI_DTIP_OFFSET 4
+#define MMCI_DTIP_SIZE 1
+#define MMCI_NOTBUSY_OFFSET 5
+#define MMCI_NOTBUSY_SIZE 1
+#define MMCI_ENDRX_OFFSET 6
+#define MMCI_ENDRX_SIZE 1
+#define MMCI_ENDTX_OFFSET 7
+#define MMCI_ENDTX_SIZE 1
+#define MMCI_RXBUFF_OFFSET 14
+#define MMCI_RXBUFF_SIZE 1
+#define MMCI_TXBUFE_OFFSET 15
+#define MMCI_TXBUFE_SIZE 1
+#define MMCI_RINDE_OFFSET 16
+#define MMCI_RINDE_SIZE 1
+#define MMCI_RDIRE_OFFSET 17
+#define MMCI_RDIRE_SIZE 1
+#define MMCI_RCRCE_OFFSET 18
+#define MMCI_RCRCE_SIZE 1
+#define MMCI_RENDE_OFFSET 19
+#define MMCI_RENDE_SIZE 1
+#define MMCI_RTOE_OFFSET 20
+#define MMCI_RTOE_SIZE 1
+#define MMCI_DCRCE_OFFSET 21
+#define MMCI_DCRCE_SIZE 1
+#define MMCI_DTOE_OFFSET 22
+#define MMCI_DTOE_SIZE 1
+#define MMCI_OVRE_OFFSET 30
+#define MMCI_OVRE_SIZE 1
+#define MMCI_UNRE_OFFSET 31
+#define MMCI_UNRE_SIZE 1
+
+/* Constants for DTOMUL */
+#define MMCI_DTOMUL_1_CYCLE 0
+#define MMCI_DTOMUL_16_CYCLES 1
+#define MMCI_DTOMUL_128_CYCLES 2
+#define MMCI_DTOMUL_256_CYCLES 3
+#define MMCI_DTOMUL_1024_CYCLES 4
+#define MMCI_DTOMUL_4096_CYCLES 5
+#define MMCI_DTOMUL_65536_CYCLES 6
+#define MMCI_DTOMUL_1048576_CYCLES 7
+
+/* Constants for RSPTYP */
+#define MMCI_RSPTYP_NO_RESP 0
+#define MMCI_RSPTYP_48_BIT_RESP 1
+#define MMCI_RSPTYP_136_BIT_RESP 2
+
+/* Constants for SPCMD */
+#define MMCI_SPCMD_NO_SPEC_CMD 0
+#define MMCI_SPCMD_INIT_CMD 1
+#define MMCI_SPCMD_SYNC_CMD 2
+#define MMCI_SPCMD_INT_CMD 4
+#define MMCI_SPCMD_INT_RESP 5
+
+/* Constants for TRCMD */
+#define MMCI_TRCMD_NO_TRANS 0
+#define MMCI_TRCMD_START_TRANS 1
+#define MMCI_TRCMD_STOP_TRANS 2
+
+/* Constants for TRTYP */
+#define MMCI_TRTYP_BLOCK 0
+#define MMCI_TRTYP_MULTI_BLOCK 1
+#define MMCI_TRTYP_STREAM 2
+
+/* Bit manipulation macros */
+#define MMCI_BIT(name) \
+ (1 << MMCI_##name##_OFFSET)
+#define MMCI_BF(name,value) \
+ (((value) & ((1 << MMCI_##name##_SIZE) - 1)) \
+ << MMCI_##name##_OFFSET)
+#define MMCI_BFEXT(name,value) \
+ (((value) >> MMCI_##name##_OFFSET)\
+ & ((1 << MMCI_##name##_SIZE) - 1))
+#define MMCI_BFINS(name,value,old) \
+ (((old) & ~(((1 << MMCI_##name##_SIZE) - 1) \
+ << MMCI_##name##_OFFSET)) \
+ | MMCI_BF(name,value))
+
+/* Register access macros */
+#define mmci_readl(reg) \
+ readl((void *)MMCI_BASE + MMCI_##reg)
+#define mmci_writel(reg,value) \
+ writel((value), (void *)MMCI_BASE + MMCI_##reg)
+
+#endif /* __CPU_AT32AP_ATMEL_MCI_H__ */
diff --git a/cpu/at32ap/cpu.c b/cpu/at32ap/cpu.c
index 37e3ea0..311466b 100644
--- a/cpu/at32ap/cpu.c
+++ b/cpu/at32ap/cpu.c
@@ -26,33 +26,79 @@
#include <asm/sections.h>
#include <asm/sysreg.h>
+#include <asm/arch/clk.h>
#include <asm/arch/memory-map.h>
-#include <asm/arch/platform.h>
#include "hsmc3.h"
+#include "sm.h"
+
+/* Sanity checks */
+#if (CFG_CLKDIV_CPU > CFG_CLKDIV_HSB) \
+ || (CFG_CLKDIV_HSB > CFG_CLKDIV_PBA) \
+ || (CFG_CLKDIV_HSB > CFG_CLKDIV_PBB)
+# error Constraint fCPU >= fHSB >= fPB{A,B} violated
+#endif
+#if defined(CONFIG_PLL) && ((CFG_PLL0_MUL < 1) || (CFG_PLL0_DIV < 1))
+# error Invalid PLL multiplier and/or divider
+#endif
DECLARE_GLOBAL_DATA_PTR;
+static void pm_init(void)
+{
+ uint32_t cksel;
+
+#ifdef CONFIG_PLL
+ /* Initialize the PLL */
+ sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
+ | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
+ | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
+ | SM_BF(PLLOPT, CFG_PLL0_OPT)
+ | SM_BF(PLLOSC, 0)
+ | SM_BIT(PLLEN)));
+
+ /* Wait for lock */
+ while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ;
+#endif
+
+ /* Set up clocks for the CPU and all peripheral buses */
+ cksel = 0;
+ if (CFG_CLKDIV_CPU)
+ cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
+ if (CFG_CLKDIV_HSB)
+ cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
+ if (CFG_CLKDIV_PBA)
+ cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
+ if (CFG_CLKDIV_PBB)
+ cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
+ sm_writel(PM_CKSEL, cksel);
+
+ gd->cpu_hz = get_cpu_clk_rate();
+
+#ifdef CONFIG_PLL
+ /* Use PLL0 as main clock */
+ sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
+#endif
+}
+
int cpu_init(void)
{
- const struct device *hebi;
extern void _evba(void);
char *p;
gd->cpu_hz = CFG_OSC0_HZ;
- /* fff03400: 00010001 04030402 00050005 10011103 */
- hebi = get_device(DEVICE_HEBI);
- hsmc3_writel(hebi, MODE0, 0x00031103);
- hsmc3_writel(hebi, CYCLE0, 0x000c000d);
- hsmc3_writel(hebi, PULSE0, 0x0b0a0906);
- hsmc3_writel(hebi, SETUP0, 0x00010002);
+ /* TODO: Move somewhere else, but needs to be run before we
+ * increase the clock frequency. */
+ hsmc3_writel(MODE0, 0x00031103);
+ hsmc3_writel(CYCLE0, 0x000c000d);
+ hsmc3_writel(PULSE0, 0x0b0a0906);
+ hsmc3_writel(SETUP0, 0x00010002);
pm_init();
sysreg_write(EVBA, (unsigned long)&_evba);
asm volatile("csrf %0" : : "i"(SYSREG_EM_OFFSET));
- gd->console_uart = get_device(CFG_CONSOLE_UART_DEV);
/* Lock everything that mess with the flash in the icache */
for (p = __flashprog_start; p <= (__flashprog_end + CFG_ICACHE_LINESZ);
diff --git a/cpu/at32ap/device.c b/cpu/at32ap/device.c
deleted file mode 100644
index 89914b6..0000000
--- a/cpu/at32ap/device.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-
-#include <asm/arch/platform.h>
-
-#include "sm.h"
-
-struct device_state {
- int refcount;
-};
-
-static struct device_state device_state[NR_DEVICES];
-
-static int claim_resource(const struct resource *res)
-{
- int ret = 0;
-
- switch (res->type) {
- case RESOURCE_GPIO:
- ret = gpio_set_func(res->u.gpio.gpio_dev,
- res->u.gpio.start,
- res->u.gpio.nr_pins,
- res->u.gpio.func);
- break;
- case RESOURCE_CLOCK:
- ret = pm_enable_clock(res->u.clock.id, res->u.clock.index);
- break;
- }
-
- return ret;
-}
-
-static void free_resource(const struct resource *res)
-{
- switch (res->type) {
- case RESOURCE_GPIO:
- gpio_free(res->u.gpio.gpio_dev, res->u.gpio.start,
- res->u.gpio.nr_pins);
- break;
- case RESOURCE_CLOCK:
- pm_disable_clock(res->u.clock.id, res->u.clock.index);
- break;
- }
-}
-
-static int init_dev(const struct device *dev)
-{
- unsigned int i;
- int ret = 0;
-
- for (i = 0; i < dev->nr_resources; i++) {
- ret = claim_resource(&dev->resource[i]);
- if (ret)
- goto cleanup;
- }
-
- return 0;
-
-cleanup:
- while (i--)
- free_resource(&dev->resource[i]);
-
- return ret;
-}
-
-const struct device *get_device(enum device_id devid)
-{
- struct device_state *devstate;
- const struct device *dev;
- unsigned long flags;
- int initialized = 0;
- int ret = 0;
-
- devstate = &device_state[devid];
- dev = &chip_device[devid];
-
- flags = disable_interrupts();
- if (devstate->refcount++)
- initialized = 1;
- if (flags)
- enable_interrupts();
-
- if (!initialized)
- ret = init_dev(dev);
-
- return ret ? NULL : dev;
-}
-
-void put_device(const struct device *dev)
-{
- struct device_state *devstate;
- unsigned long devid, flags;
-
- devid = (unsigned long)(dev - chip_device) / sizeof(struct device);
- devstate = &device_state[devid];
-
- flags = disable_interrupts();
- devstate--;
- if (!devstate) {
- unsigned int i;
- for (i = 0; i < dev->nr_resources; i++)
- free_resource(&dev->resource[i]);
- }
- if (flags)
- enable_interrupts();
-}
diff --git a/cpu/at32ap/entry.S b/cpu/at32ap/entry.S
index b52d798..a6fc688 100644
--- a/cpu/at32ap/entry.S
+++ b/cpu/at32ap/entry.S
@@ -42,8 +42,7 @@
* We're running at interrupt level 3, so we don't need to save
* r8-r12 or lr to the stack.
*/
- mov r8, lo(timer_overflow)
- orh r8, hi(timer_overflow)
+ lda.w r8, timer_overflow
ld.w r9, r8[0]
mov r10, -1
mtsr SYSREG_COMPARE, r10
diff --git a/cpu/at32ap/exception.c b/cpu/at32ap/exception.c
index 4123c44..0672685 100644
--- a/cpu/at32ap/exception.c
+++ b/cpu/at32ap/exception.c
@@ -24,6 +24,8 @@
#include <asm/sysreg.h>
#include <asm/ptrace.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static const char * const cpu_modes[8] = {
"Application", "Supervisor", "Interrupt level 0", "Interrupt level 1",
"Interrupt level 2", "Interrupt level 3", "Exception", "NMI"
@@ -109,11 +111,10 @@
printf("CPU Mode: %s\n", cpu_modes[mode]);
/* Avoid exception loops */
- if (regs->sp >= CFG_INIT_SP_ADDR
- || regs->sp < (CFG_INIT_SP_ADDR - CONFIG_STACKSIZE))
+ if (regs->sp < CFG_SDRAM_BASE || regs->sp >= gd->stack_end)
printf("\nStack pointer seems bogus, won't do stack dump\n");
else
- dump_mem("\nStack: ", regs->sp, CFG_INIT_SP_ADDR);
+ dump_mem("\nStack: ", regs->sp, gd->stack_end);
panic("Unhandled exception\n");
}
diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c
index f36da35..a936e03 100644
--- a/cpu/at32ap/hsdramc.c
+++ b/cpu/at32ap/hsdramc.c
@@ -25,17 +25,11 @@
#include <asm/io.h>
#include <asm/sdram.h>
-#include <asm/arch/platform.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
#include "hsdramc1.h"
-struct hsdramc {
- const struct device *hebi;
- void *regs;
-};
-
-static struct hsdramc hsdramc;
-
unsigned long sdram_init(const struct sdram_info *info)
{
unsigned long *sdram = (unsigned long *)uncached(info->phys_addr);
@@ -44,16 +38,6 @@
unsigned long bus_hz;
unsigned int i;
- hsdramc.hebi = get_device(DEVICE_HEBI);
- if (!hsdramc.hebi)
- return 0;
-
- /* FIXME: Both of these lines are complete hacks */
- hsdramc.regs = hsdramc.hebi->regs + 0x400;
- bus_hz = pm_get_clock_freq(hsdramc.hebi->resource[0].u.clock.id);
-
- cpu_enable_sdram();
-
tmp = (HSDRAMC1_BF(NC, info->col_bits - 8)
| HSDRAMC1_BF(NR, info->row_bits - 11)
| HSDRAMC1_BF(NB, info->bank_bits - 1)
@@ -74,7 +58,7 @@
+ info->bank_bits + 2);
#endif
- hsdramc1_writel(&hsdramc, CR, tmp);
+ hsdramc1_writel(CR, tmp);
/*
* Initialization sequence for SDRAM, from the data sheet:
@@ -87,15 +71,15 @@
/*
* 2. A Precharge All command is issued to the SDRAM
*/
- hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_BANKS_PRECHARGE);
- hsdramc1_readl(&hsdramc, MR);
+ hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE);
+ hsdramc1_readl(MR);
writel(0, sdram);
/*
* 3. Eight auto-refresh (CBR) cycles are provided
*/
- hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_AUTO_REFRESH);
- hsdramc1_readl(&hsdramc, MR);
+ hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH);
+ hsdramc1_readl(MR);
for (i = 0; i < 8; i++)
writel(0, sdram);
@@ -106,8 +90,8 @@
*
* CAS from info struct, burst length 1, serial burst type
*/
- hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_LOAD_MODE);
- hsdramc1_readl(&hsdramc, MR);
+ hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE);
+ hsdramc1_readl(MR);
writel(0, sdram + (info->cas << 4));
/*
@@ -117,9 +101,9 @@
* From the timing diagram, it looks like tMRD is 3
* cycles...try a dummy read from the peripheral bus.
*/
- hsdramc1_readl(&hsdramc, MR);
- hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_NORMAL);
- hsdramc1_readl(&hsdramc, MR);
+ hsdramc1_readl(MR);
+ hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL);
+ hsdramc1_readl(MR);
writel(0, sdram);
/*
@@ -128,7 +112,8 @@
*
* 15.6 us is a typical value for a burst of length one
*/
- hsdramc1_writel(&hsdramc, TR, (156 * (bus_hz / 1000)) / 10000);
+ bus_hz = get_sdram_clk_rate();
+ hsdramc1_writel(TR, (156 * (bus_hz / 1000)) / 10000);
printf("SDRAM: %u MB at address 0x%08lx\n",
sdram_size >> 20, info->phys_addr);
diff --git a/cpu/at32ap/hsdramc1.h b/cpu/at32ap/hsdramc1.h
index ce229bc..305d2cb 100644
--- a/cpu/at32ap/hsdramc1.h
+++ b/cpu/at32ap/hsdramc1.h
@@ -135,9 +135,9 @@
| HSDRAMC1_BF(name,value))
/* Register access macros */
-#define hsdramc1_readl(port,reg) \
- readl((port)->regs + HSDRAMC1_##reg)
-#define hsdramc1_writel(port,reg,value) \
- writel((value), (port)->regs + HSDRAMC1_##reg)
+#define hsdramc1_readl(reg) \
+ readl((void *)HSDRAMC_BASE + HSDRAMC1_##reg)
+#define hsdramc1_writel(reg,value) \
+ writel((value), (void *)HSDRAMC_BASE + HSDRAMC1_##reg)
#endif /* __ASM_AVR32_HSDRAMC1_H__ */
diff --git a/cpu/at32ap/hsmc3.h b/cpu/at32ap/hsmc3.h
index ec78cee..ca533b9 100644
--- a/cpu/at32ap/hsmc3.h
+++ b/cpu/at32ap/hsmc3.h
@@ -118,9 +118,9 @@
| HSMC3_BF(name,value))
/* Register access macros */
-#define hsmc3_readl(port,reg) \
- readl((port)->regs + HSMC3_##reg)
-#define hsmc3_writel(port,reg,value) \
- writel((value), (port)->regs + HSMC3_##reg)
+#define hsmc3_readl(reg) \
+ readl((void *)HSMC_BASE + HSMC3_##reg)
+#define hsmc3_writel(reg,value) \
+ writel((value), (void *)HSMC_BASE + HSMC3_##reg)
#endif /* __CPU_AT32AP_HSMC3_H__ */
diff --git a/cpu/at32ap/interrupts.c b/cpu/at32ap/interrupts.c
index d720cfa..c9e0499 100644
--- a/cpu/at32ap/interrupts.c
+++ b/cpu/at32ap/interrupts.c
@@ -27,7 +27,7 @@
#include <asm/processor.h>
#include <asm/sysreg.h>
-#include <asm/arch/platform.h>
+#include <asm/arch/memory-map.h>
#define HANDLER_MASK 0x00ffffff
#define INTLEV_SHIFT 30
@@ -44,8 +44,6 @@
*/
static unsigned long tb_factor;
-static const struct device *intc_dev;
-
unsigned long get_tbclk(void)
{
return gd->cpu_hz;
@@ -117,16 +115,19 @@
static int set_interrupt_handler(unsigned int nr, void (*handler)(void),
unsigned int priority)
{
+ extern void _evba(void);
unsigned long intpr;
unsigned long handler_addr = (unsigned long)handler;
+ handler_addr -= (unsigned long)&_evba;
+
if ((handler_addr & HANDLER_MASK) != handler_addr
|| (priority & INTLEV_MASK) != priority)
return -EINVAL;
intpr = (handler_addr & HANDLER_MASK);
intpr |= (priority & INTLEV_MASK) << INTLEV_SHIFT;
- writel(intpr, intc_dev->regs + 4 * nr);
+ writel(intpr, (void *)INTC_BASE + 4 * nr);
return 0;
}
@@ -143,10 +144,7 @@
do_div(tmp, gd->cpu_hz);
tb_factor = (u32)tmp;
- intc_dev = get_device(DEVICE_INTC);
-
- if (!intc_dev
- || set_interrupt_handler(0, &timer_interrupt_handler, 3))
+ if (set_interrupt_handler(0, &timer_interrupt_handler, 3))
return;
/* For all practical purposes, this gives us an overflow interrupt */
diff --git a/cpu/at32ap/pio.c b/cpu/at32ap/pio.c
index 8b6c3a3..9ba0b8e 100644
--- a/cpu/at32ap/pio.c
+++ b/cpu/at32ap/pio.c
@@ -21,74 +21,40 @@
*/
#include <common.h>
-#include <asm/errno.h>
#include <asm/io.h>
-#include <asm/arch/platform.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/memory-map.h>
#include "pio2.h"
-struct pio_state {
- const struct device *dev;
- u32 alloc_mask;
-};
-
-static struct pio_state pio_state[CFG_NR_PIOS];
-
-int gpio_set_func(enum device_id gpio_devid, unsigned int start,
- unsigned int nr_pins, enum gpio_func func)
+void gpio_select_periph_A(unsigned int pin, int use_pullup)
{
- const struct device *gpio;
- struct pio_state *state;
- u32 mask;
+ void *base = gpio_pin_to_addr(pin);
+ uint32_t mask = 1 << (pin & 0x1f);
- state = &pio_state[gpio_devid - DEVICE_PIOA];
+ if (!base)
+ panic("Invalid GPIO pin %u\n", pin);
- gpio = get_device(gpio_devid);
- if (!gpio)
- return -EBUSY;
-
- state->dev = gpio;
- mask = ((1 << nr_pins) - 1) << start;
-
- if (mask & state->alloc_mask) {
- put_device(gpio);
- return -EBUSY;
- }
- state->alloc_mask |= mask;
-
- switch (func) {
- case GPIO_FUNC_GPIO:
- /* TODO */
- return -EINVAL;
- case GPIO_FUNC_A:
- pio2_writel(gpio, ASR, mask);
- pio2_writel(gpio, PDR, mask);
- pio2_writel(gpio, PUDR, mask);
- break;
- case GPIO_FUNC_B:
- pio2_writel(gpio, BSR, mask);
- pio2_writel(gpio, PDR, mask);
- pio2_writel(gpio, PUDR, mask);
- break;
- }
-
- return 0;
+ pio2_writel(base, ASR, mask);
+ pio2_writel(base, PDR, mask);
+ if (use_pullup)
+ pio2_writel(base, PUER, mask);
+ else
+ pio2_writel(base, PUDR, mask);
}
-void gpio_free(enum device_id gpio_devid, unsigned int start,
- unsigned int nr_pins)
+void gpio_select_periph_B(unsigned int pin, int use_pullup)
{
- const struct device *gpio;
- struct pio_state *state;
- u32 mask;
+ void *base = gpio_pin_to_addr(pin);
+ uint32_t mask = 1 << (pin & 0x1f);
- state = &pio_state[gpio_devid - DEVICE_PIOA];
- gpio = state->dev;
- mask = ((1 << nr_pins) - 1) << start;
+ if (!base)
+ panic("Invalid GPIO pin %u\n", pin);
- pio2_writel(gpio, ODR, mask);
- pio2_writel(gpio, PER, mask);
-
- state->alloc_mask &= ~mask;
- put_device(gpio);
+ pio2_writel(base, BSR, mask);
+ pio2_writel(base, PDR, mask);
+ if (use_pullup)
+ pio2_writel(base, PUER, mask);
+ else
+ pio2_writel(base, PUDR, mask);
}
diff --git a/cpu/at32ap/pio2.h b/cpu/at32ap/pio2.h
index 6b79de3..9719ea8 100644
--- a/cpu/at32ap/pio2.h
+++ b/cpu/at32ap/pio2.h
@@ -36,9 +36,9 @@
#define PIO2_OWSR 0x00a8
/* Register access macros */
-#define pio2_readl(port,reg) \
- readl((port)->regs + PIO2_##reg)
-#define pio2_writel(port,reg,value) \
- writel((value), (port)->regs + PIO2_##reg)
+#define pio2_readl(base,reg) \
+ readl((void *)base + PIO2_##reg)
+#define pio2_writel(base,reg,value) \
+ writel((value), (void *)base + PIO2_##reg)
#endif /* __CPU_AT32AP_PIO2_H__ */
diff --git a/cpu/at32ap/pm.c b/cpu/at32ap/pm.c
index 01ac325..c78d547 100644
--- a/cpu/at32ap/pm.c
+++ b/cpu/at32ap/pm.c
@@ -26,138 +26,17 @@
#include <asm/io.h>
#include <asm/arch/memory-map.h>
-#include <asm/arch/platform.h>
#include "sm.h"
-/* Sanity checks */
-#if (CFG_CLKDIV_CPU > CFG_CLKDIV_HSB) \
- || (CFG_CLKDIV_HSB > CFG_CLKDIV_PBA) \
- || (CFG_CLKDIV_HSB > CFG_CLKDIV_PBB)
-# error Constraint fCPU >= fHSB >= fPB{A,B} violated
-#endif
-#if defined(CONFIG_PLL) && ((CFG_PLL0_MUL < 1) || (CFG_PLL0_DIV < 1))
-# error Invalid PLL multiplier and/or divider
+
+#ifdef CONFIG_PLL
+#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
+#else
+#define MAIN_CLK_RATE (CFG_OSC0_HZ)
#endif
DECLARE_GLOBAL_DATA_PTR;
-struct clock_domain_state {
- const struct device *bridge;
- unsigned long freq;
- u32 mask;
-};
-static struct clock_domain_state ckd_state[NR_CLOCK_DOMAINS];
-
-int pm_enable_clock(enum clock_domain_id id, unsigned int index)
-{
- const struct clock_domain *ckd = &chip_clock[id];
- struct clock_domain_state *state = &ckd_state[id];
-
- if (ckd->bridge != NO_DEVICE) {
- state->bridge = get_device(ckd->bridge);
- if (!state->bridge)
- return -EBUSY;
- }
-
- state->mask |= 1 << index;
- if (gd->sm)
- writel(state->mask, gd->sm->regs + ckd->reg);
-
- return 0;
-}
-
-void pm_disable_clock(enum clock_domain_id id, unsigned int index)
-{
- const struct clock_domain *ckd = &chip_clock[id];
- struct clock_domain_state *state = &ckd_state[id];
-
- state->mask &= ~(1 << index);
- if (gd->sm)
- writel(state->mask, gd->sm->regs + ckd->reg);
-
- if (ckd->bridge)
- put_device(state->bridge);
-}
-
-unsigned long pm_get_clock_freq(enum clock_domain_id domain)
-{
- return ckd_state[domain].freq;
-}
-
-void pm_init(void)
-{
- uint32_t cksel = 0;
- unsigned long main_clock;
-
- /* Make sure we don't disable any device we're already using */
- get_device(DEVICE_HRAMC);
- get_device(DEVICE_HEBI);
-
- /* Enable the PICO as well */
- ckd_state[CLOCK_CPU].mask |= 1;
-
- gd->sm = get_device(DEVICE_SM);
- if (!gd->sm)
- panic("Unable to claim system manager device!\n");
-
- /* Disable any devices that haven't been explicitly claimed */
- sm_writel(gd->sm, PM_PBB_MASK, ckd_state[CLOCK_PBB].mask);
- sm_writel(gd->sm, PM_PBA_MASK, ckd_state[CLOCK_PBA].mask);
- sm_writel(gd->sm, PM_HSB_MASK, ckd_state[CLOCK_HSB].mask);
- sm_writel(gd->sm, PM_CPU_MASK, ckd_state[CLOCK_CPU].mask);
-
-#ifdef CONFIG_PLL
- /* Initialize the PLL */
- main_clock = (CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL;
-
- sm_writel(gd->sm, PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
- | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
- | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
- | SM_BF(PLLOPT, CFG_PLL0_OPT)
- | SM_BF(PLLOSC, 0)
- | SM_BIT(PLLEN)));
-
- /* Wait for lock */
- while (!(sm_readl(gd->sm, PM_ISR) & SM_BIT(LOCK0))) ;
-#else
- main_clock = CFG_OSC0_HZ;
-#endif
-
- /* Set up clocks for the CPU and all peripheral buses */
- if (CFG_CLKDIV_CPU) {
- cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
- ckd_state[CLOCK_CPU].freq = main_clock / (1 << CFG_CLKDIV_CPU);
- } else {
- ckd_state[CLOCK_CPU].freq = main_clock;
- }
- if (CFG_CLKDIV_HSB) {
- cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
- ckd_state[CLOCK_HSB].freq = main_clock / (1 << CFG_CLKDIV_HSB);
- } else {
- ckd_state[CLOCK_HSB].freq = main_clock;
- }
- if (CFG_CLKDIV_PBA) {
- cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
- ckd_state[CLOCK_PBA].freq = main_clock / (1 << CFG_CLKDIV_PBA);
- } else {
- ckd_state[CLOCK_PBA].freq = main_clock;
- }
- if (CFG_CLKDIV_PBB) {
- cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
- ckd_state[CLOCK_PBB].freq = main_clock / (1 << CFG_CLKDIV_PBB);
- } else {
- ckd_state[CLOCK_PBB].freq = main_clock;
- }
- sm_writel(gd->sm, PM_CKSEL, cksel);
-
- /* CFG_HZ currently depends on cpu_hz */
- gd->cpu_hz = ckd_state[CLOCK_CPU].freq;
-
-#ifdef CONFIG_PLL
- /* Use PLL0 as main clock */
- sm_writel(gd->sm, PM_MCCTRL, SM_BIT(PLLSEL));
-#endif
-}
#endif /* CFG_POWER_MANAGER */
diff --git a/cpu/at32ap/sm.h b/cpu/at32ap/sm.h
index ce81ef0..6492c8e 100644
--- a/cpu/at32ap/sm.h
+++ b/cpu/at32ap/sm.h
@@ -196,9 +196,9 @@
| SM_BF(name,value))
/* Register access macros */
-#define sm_readl(port,reg) \
- readl((port)->regs + SM_##reg)
-#define sm_writel(port,reg,value) \
- writel((value), (port)->regs + SM_##reg)
+#define sm_readl(reg) \
+ readl((void *)SM_BASE + SM_##reg)
+#define sm_writel(reg,value) \
+ writel((value), (void *)SM_BASE + SM_##reg)
#endif /* __CPU_AT32AP_SM_H__ */
diff --git a/cpu/at32ap/start.S b/cpu/at32ap/start.S
index 79ee33b..ab8c2b7 100644
--- a/cpu/at32ap/start.S
+++ b/cpu/at32ap/start.S
@@ -70,32 +70,12 @@
2: lddpc sp, sp_init
- /*
- * Relocate the data section and initialize .bss. Everything
- * is guaranteed to be at least doubleword aligned by the
- * linker script.
- */
- lddpc r12, .Ldata_vma
- lddpc r11, .Ldata_lma
- lddpc r10, .Ldata_end
- sub r10, r12
-4: ld.d r8, r11++
- sub r10, 8
- st.d r12++, r8
- brne 4b
-
- mov r8, 0
- mov r9, 0
- lddpc r10, .Lbss_end
- sub r10, r12
-4: sub r10, 8
- st.d r12++, r8
- brne 4b
-
/* Initialize the GOT pointer */
lddpc r6, got_init
3: rsub r6, pc
- ld.w pc, r6[start_u_boot@got]
+
+ /* Let's go */
+ rjmp board_init_f
.align 2
.type sp_init,@object
@@ -103,11 +83,82 @@
.long CFG_INIT_SP_ADDR
got_init:
.long 3b - _GLOBAL_OFFSET_TABLE_
-.Ldata_lma:
- .long __data_lma
-.Ldata_vma:
- .long _data
-.Ldata_end:
- .long _edata
-.Lbss_end:
- .long _end
+
+ /*
+ * void relocate_code(new_sp, new_gd, monitor_addr)
+ *
+ * Relocate the u-boot image into RAM and continue from there.
+ * Does not return.
+ */
+ .global relocate_code
+ .type relocate_code,@function
+relocate_code:
+ mov sp, r12 /* use new stack */
+ mov r12, r11 /* save new_gd */
+ mov r11, r10 /* save destination address */
+
+ /* copy .text section and flush the cache along the way */
+ lda.w r8, _text
+ lda.w r9, _etext
+ sub lr, r10, r8 /* relocation offset */
+
+1: ldm r8++, r0-r3
+ stm r10, r0-r3
+ sub r10, -16
+ ldm r8++, r0-r3
+ stm r10, r0-r3
+ sub r10, -16
+ cp.w r8, r9
+ cache r10[-4], 0x0d /* dcache clean/invalidate */
+ cache r10[-4], 0x01 /* icache invalidate */
+ brlt 1b
+
+ /* flush write buffer */
+ sync 0
+
+ /* copy data sections */
+ lda.w r9, _edata
+1: ld.d r0, r8++
+ st.d r10++, r0
+ cp.w r8, r9
+ brlt 1b
+
+ /* zero out .bss */
+ mov r0, 0
+ mov r1, 0
+ lda.w r9, _end
+ sub r9, r8
+1: st.d r10++, r0
+ sub r9, 8
+ brgt 1b
+
+ /* jump to RAM */
+ sub r0, pc, . - in_ram
+ add pc, r0, lr
+
+ .align 2
+in_ram:
+ /* find the new GOT and relocate it */
+ lddpc r6, got_init_reloc
+3: rsub r6, pc
+ mov r8, r6
+ lda.w r9, _egot
+ lda.w r10, _got
+ sub r9, r10
+1: ld.w r0, r8[0]
+ add r0, lr
+ st.w r8++, r0
+ sub r9, 4
+ brgt 1b
+
+ /* Move the exception handlers */
+ mfsr r2, SYSREG_EVBA
+ add r2, lr
+ mtsr SYSREG_EVBA, r2
+
+ /* Do the rest of the initialization sequence */
+ call board_init_r
+
+ .align 2
+got_init_reloc:
+ .long 3b - _GLOBAL_OFFSET_TABLE_
diff --git a/cpu/bf533/Makefile b/cpu/bf533/Makefile
index 90018f3..dd4f299 100644
--- a/cpu/bf533/Makefile
+++ b/cpu/bf533/Makefile
@@ -1,6 +1,6 @@
# U-boot - Makefile
#
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -20,8 +20,8 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
#
include $(TOPDIR)/config.mk
diff --git a/cpu/bf533/bf533_serial.h b/cpu/bf533/bf533_serial.h
index 0a04f3e..25b96a9 100644
--- a/cpu/bf533/bf533_serial.h
+++ b/cpu/bf533/bf533_serial.h
@@ -1,7 +1,7 @@
/*
* U-boot - bf533_serial.h Serial Driver defines
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver.
@@ -38,8 +38,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _Bf533_SERIAL_H
diff --git a/cpu/bf533/config.mk b/cpu/bf533/config.mk
index 10817d9..6a713c3 100644
--- a/cpu/bf533/config.mk
+++ b/cpu/bf533/config.mk
@@ -1,6 +1,6 @@
# U-boot - config.mk
#
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
#
# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -20,8 +20,8 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
#
PLATFORM_RELFLAGS += -mcpu=bf533 -ffixed-P5
diff --git a/cpu/bf533/cpu.c b/cpu/bf533/cpu.c
index ac8ec51..8118861 100644
--- a/cpu/bf533/cpu.c
+++ b/cpu/bf533/cpu.c
@@ -1,7 +1,7 @@
/*
* U-boot - cpu.c CPU specific functions
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
@@ -93,7 +93,7 @@
/* Fill the rest with invalid entry */
if (j <= 15) {
- for (; j <= 16; j++) {
+ for (; j < 16; j++) {
debug("filling %i with 0", j);
*I1++ = 0x0;
}
@@ -169,7 +169,7 @@
/* Fill the rest with invalid entry */
if (j <= 15) {
- for (; j <= 16; j++) {
+ for (; j < 16; j++) {
debug("filling %i with 0", j);
*I1++ = 0x0;
}
diff --git a/cpu/bf533/cpu.h b/cpu/bf533/cpu.h
index 821363e..b6b73b1 100644
--- a/cpu/bf533/cpu.h
+++ b/cpu/bf533/cpu.h
@@ -1,7 +1,7 @@
/*
* U-boot - cpu.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _CPU_H_
diff --git a/cpu/bf533/flush.S b/cpu/bf533/flush.S
index 0512f3b..62e3d65 100644
--- a/cpu/bf533/flush.S
+++ b/cpu/bf533/flush.S
@@ -1,9 +1,9 @@
-/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
- * Copyright (C) 2004 LG SOft India. All Rights Reserved.
+/* Copyright (C) 2003-2007 Analog Devices Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License.
*/
+
#define ASSEMBLY
#include <asm/linkage.h>
diff --git a/cpu/bf533/interrupt.S b/cpu/bf533/interrupt.S
index 524da8f..c356d53 100644
--- a/cpu/bf533/interrupt.S
+++ b/cpu/bf533/interrupt.S
@@ -1,7 +1,7 @@
/*
* U-boot - interrupt.S Processing of interrupts and exception handling
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -35,8 +35,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#define ASSEMBLY
diff --git a/cpu/bf533/interrupts.c b/cpu/bf533/interrupts.c
index 9317f26..14d06cf 100644
--- a/cpu/bf533/interrupts.c
+++ b/cpu/bf533/interrupts.c
@@ -1,7 +1,7 @@
/*
* U-boot - interrupts.c Interrupt related routines
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on interrupts.c
* Copyright 1996 Roman Zippel
@@ -30,8 +30,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/cpu/bf533/ints.c b/cpu/bf533/ints.c
index f476f14..5586689 100644
--- a/cpu/bf533/ints.c
+++ b/cpu/bf533/ints.c
@@ -1,7 +1,7 @@
/*
* U-boot - ints.c Interrupt related routines
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on ints.c
*
@@ -32,8 +32,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c
index 11a46be..6cab5da 100644
--- a/cpu/bf533/serial.c
+++ b/cpu/bf533/serial.c
@@ -1,7 +1,7 @@
/*
* U-boot - serial.c Serial driver for BF533
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART.
@@ -38,8 +38,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/cpu/bf533/start.S b/cpu/bf533/start.S
index 94556d6..67a60cf 100644
--- a/cpu/bf533/start.S
+++ b/cpu/bf533/start.S
@@ -1,7 +1,7 @@
/*
* U-boot - start.S Startup file of u-boot for BF533/BF561
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on head.S
* Copyright (c) 2003 Metrowerks/Motorola
@@ -26,8 +26,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
/*
diff --git a/cpu/bf533/start1.S b/cpu/bf533/start1.S
index 72cfafb..6d4731b 100644
--- a/cpu/bf533/start1.S
+++ b/cpu/bf533/start1.S
@@ -1,7 +1,7 @@
/*
* U-boot - start1.S Code running out of RAM after relocation
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#define ASSEMBLY
diff --git a/cpu/bf533/traps.c b/cpu/bf533/traps.c
index 248e34f..19b1fde 100644
--- a/cpu/bf533/traps.c
+++ b/cpu/bf533/traps.c
@@ -1,7 +1,7 @@
/*
* U-boot - traps.c Routines related to interrupts and exceptions
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* No original Copyright holder listed,
@@ -29,8 +29,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
@@ -39,7 +39,6 @@
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/traps.h>
-#include <asm/page.h>
#include <asm/machdep.h>
#include "cpu.h"
#include <asm/arch/anomaly.h>
diff --git a/cpu/bf537/Makefile b/cpu/bf537/Makefile
index 61c7338..8b0f9c0 100644
--- a/cpu/bf537/Makefile
+++ b/cpu/bf537/Makefile
@@ -1,6 +1,6 @@
# U-boot - Makefile
#
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
#
# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -20,8 +20,8 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
#
include $(TOPDIR)/config.mk
diff --git a/cpu/bf537/config.mk b/cpu/bf537/config.mk
index 4d57d9c..8a35789 100644
--- a/cpu/bf537/config.mk
+++ b/cpu/bf537/config.mk
@@ -1,6 +1,6 @@
# U-boot - config.mk
#
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
#
# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -20,8 +20,8 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
#
PLATFORM_RELFLAGS += -mcpu=bf537 -ffixed-P5
diff --git a/cpu/bf537/cpu.c b/cpu/bf537/cpu.c
index cb8dc3c..62f603b 100644
--- a/cpu/bf537/cpu.c
+++ b/cpu/bf537/cpu.c
@@ -1,7 +1,7 @@
/*
* U-boot - cpu.c CPU specific functions
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/cpu/bf537/cpu.h b/cpu/bf537/cpu.h
index 821363e..b6b73b1 100644
--- a/cpu/bf537/cpu.h
+++ b/cpu/bf537/cpu.h
@@ -1,7 +1,7 @@
/*
* U-boot - cpu.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _CPU_H_
diff --git a/cpu/bf537/flush.S b/cpu/bf537/flush.S
index c260a8f..fbd26cc 100644
--- a/cpu/bf537/flush.S
+++ b/cpu/bf537/flush.S
@@ -1,9 +1,9 @@
-/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
- * Copyright (C) 2004 LG SOft India. All Rights Reserved.
+/* Copyright (C) 2003-2007 Analog Devices Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License.
*/
+
#define ASSEMBLY
#include <asm/linkage.h>
diff --git a/cpu/bf537/interrupt.S b/cpu/bf537/interrupt.S
index a8be34f..a71df55 100644
--- a/cpu/bf537/interrupt.S
+++ b/cpu/bf537/interrupt.S
@@ -1,7 +1,7 @@
/*
* U-boot - interrupt.S Processing of interrupts and exception handling
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -35,8 +35,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#define ASSEMBLY
diff --git a/cpu/bf537/interrupts.c b/cpu/bf537/interrupts.c
index 2ca76ec..d2213b1 100644
--- a/cpu/bf537/interrupts.c
+++ b/cpu/bf537/interrupts.c
@@ -1,7 +1,7 @@
/*
* U-boot - interrupts.c Interrupt related routines
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on interrupts.c
* Copyright 1996 Roman Zippel
@@ -30,8 +30,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/cpu/bf537/ints.c b/cpu/bf537/ints.c
index f476f14..5586689 100644
--- a/cpu/bf537/ints.c
+++ b/cpu/bf537/ints.c
@@ -1,7 +1,7 @@
/*
* U-boot - ints.c Interrupt related routines
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on ints.c
*
@@ -32,8 +32,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/cpu/bf537/serial.c b/cpu/bf537/serial.c
index dd4f916..e04d08a 100644
--- a/cpu/bf537/serial.c
+++ b/cpu/bf537/serial.c
@@ -1,7 +1,7 @@
/*
* U-boot - serial.c Serial driver for BF537
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* bf537_serial.c: Serial driver for BlackFin BF537 internal UART.
@@ -38,8 +38,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/cpu/bf537/serial.h b/cpu/bf537/serial.h
index c9ee3dc..76555c2 100644
--- a/cpu/bf537/serial.h
+++ b/cpu/bf537/serial.h
@@ -1,7 +1,7 @@
/*
* U-boot - bf537_serial.h Serial Driver defines
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver.
@@ -38,8 +38,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _Bf537_SERIAL_H
diff --git a/cpu/bf537/start.S b/cpu/bf537/start.S
index 264e9b6..4e02bcb 100644
--- a/cpu/bf537/start.S
+++ b/cpu/bf537/start.S
@@ -1,7 +1,7 @@
/*
* U-boot - start.S Startup file of u-boot for BF537
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on head.S
* Copyright (c) 2003 Metrowerks/Motorola
@@ -26,8 +26,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
/*
diff --git a/cpu/bf537/start1.S b/cpu/bf537/start1.S
index 72cfafb..6d4731b 100644
--- a/cpu/bf537/start1.S
+++ b/cpu/bf537/start1.S
@@ -1,7 +1,7 @@
/*
* U-boot - start1.S Code running out of RAM after relocation
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#define ASSEMBLY
diff --git a/cpu/bf537/traps.c b/cpu/bf537/traps.c
index 994ece8..4e18e27 100644
--- a/cpu/bf537/traps.c
+++ b/cpu/bf537/traps.c
@@ -1,7 +1,7 @@
/*
* U-boot - traps.c Routines related to interrupts and exceptions
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* No original Copyright holder listed,
@@ -29,8 +29,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
@@ -39,7 +39,6 @@
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/traps.h>
-#include <asm/page.h>
#include <asm/machdep.h>
#include "cpu.h"
#include <asm/arch/anomaly.h>
diff --git a/cpu/bf561/Makefile b/cpu/bf561/Makefile
index ee7842a..2947169 100644
--- a/cpu/bf561/Makefile
+++ b/cpu/bf561/Makefile
@@ -1,6 +1,6 @@
# U-boot - Makefile
#
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
#
# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -20,8 +20,8 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
#
include $(TOPDIR)/config.mk
diff --git a/cpu/bf561/config.mk b/cpu/bf561/config.mk
index c49a0ba..f4dc04b 100644
--- a/cpu/bf561/config.mk
+++ b/cpu/bf561/config.mk
@@ -1,6 +1,6 @@
# U-boot - config.mk
#
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
#
# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -20,8 +20,8 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
#
PLATFORM_RELFLAGS += -mcpu=bf561 -ffixed-P5
diff --git a/cpu/bf561/cpu.c b/cpu/bf561/cpu.c
index a7b53d8..5b907cd 100644
--- a/cpu/bf561/cpu.c
+++ b/cpu/bf561/cpu.c
@@ -1,7 +1,7 @@
/*
* U-boot - cpu.c CPU specific functions
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/cpu/bf561/cpu.h b/cpu/bf561/cpu.h
index 821363e..b6b73b1 100644
--- a/cpu/bf561/cpu.h
+++ b/cpu/bf561/cpu.h
@@ -1,7 +1,7 @@
/*
* U-boot - cpu.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _CPU_H_
diff --git a/cpu/bf561/flush.S b/cpu/bf561/flush.S
index 7e12c83..0140a60 100644
--- a/cpu/bf561/flush.S
+++ b/cpu/bf561/flush.S
@@ -1,9 +1,9 @@
-/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
- * Copyright (C) 2004 LG SOft India. All Rights Reserved.
+/* Copyright (C) 2003-2007 Analog Devices Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License.
*/
+
#define ASSEMBLY
#include <asm/linkage.h>
diff --git a/cpu/bf561/interrupt.S b/cpu/bf561/interrupt.S
index f82fd9b..21839ce 100644
--- a/cpu/bf561/interrupt.S
+++ b/cpu/bf561/interrupt.S
@@ -1,7 +1,7 @@
/*
* U-boot - interrupt.S Processing of interrupts and exception handling
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -35,8 +35,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#define ASSEMBLY
diff --git a/cpu/bf561/interrupts.c b/cpu/bf561/interrupts.c
index e314f60..ecbc6ad 100644
--- a/cpu/bf561/interrupts.c
+++ b/cpu/bf561/interrupts.c
@@ -1,7 +1,7 @@
/*
* U-boot - interrupts.c Interrupt related routines
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on interrupts.c
* Copyright 1996 Roman Zippel
@@ -30,8 +30,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/cpu/bf561/ints.c b/cpu/bf561/ints.c
index 328e5d8..27a38a3 100644
--- a/cpu/bf561/ints.c
+++ b/cpu/bf561/ints.c
@@ -1,7 +1,7 @@
/*
* U-boot - ints.c Interrupt related routines
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on ints.c
*
@@ -32,8 +32,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/cpu/bf561/serial.c b/cpu/bf561/serial.c
index baec1d3..7f5c695 100644
--- a/cpu/bf561/serial.c
+++ b/cpu/bf561/serial.c
@@ -1,7 +1,7 @@
/*
* U-boot - serial.c Serial driver for BF561
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART.
@@ -38,8 +38,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/cpu/bf561/serial.h b/cpu/bf561/serial.h
index 98c1242..c1cbf36 100644
--- a/cpu/bf561/serial.h
+++ b/cpu/bf561/serial.h
@@ -1,7 +1,7 @@
/*
* U-boot - bf561_serial.h Serial Driver defines
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver.
@@ -38,8 +38,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _Bf561_SERIAL_H
diff --git a/cpu/bf561/start.S b/cpu/bf561/start.S
index 9333648..bd26cf3 100644
--- a/cpu/bf561/start.S
+++ b/cpu/bf561/start.S
@@ -1,7 +1,7 @@
/*
* U-boot - start.S Startup file of u-boot for BF533/BF561
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on head.S
* Copyright (c) 2003 Metrowerks/Motorola
@@ -26,8 +26,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
/*
diff --git a/cpu/bf561/start1.S b/cpu/bf561/start1.S
index 72cfafb..6d4731b 100644
--- a/cpu/bf561/start1.S
+++ b/cpu/bf561/start1.S
@@ -1,7 +1,7 @@
/*
* U-boot - start1.S Code running out of RAM after relocation
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#define ASSEMBLY
diff --git a/cpu/bf561/traps.c b/cpu/bf561/traps.c
index f5ff3a8..7e2dcd1 100644
--- a/cpu/bf561/traps.c
+++ b/cpu/bf561/traps.c
@@ -1,7 +1,7 @@
/*
* U-boot - traps.c Routines related to interrupts and exceptions
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* No original Copyright holder listed,
@@ -29,8 +29,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
diff --git a/cpu/ixp/npe/Makefile b/cpu/ixp/npe/Makefile
index 4de34fd..7f020b5 100644
--- a/cpu/ixp/npe/Makefile
+++ b/cpu/ixp/npe/Makefile
@@ -87,7 +87,7 @@
all: $(LIB)
-$(LIB): $(obj).depend $(OBJS)
+$(LIB): $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
diff --git a/cpu/microblaze/Makefile b/cpu/microblaze/Makefile
index db1afa5..9d54201 100644
--- a/cpu/microblaze/Makefile
+++ b/cpu/microblaze/Makefile
@@ -26,7 +26,7 @@
LIB = $(obj)lib$(CPU).a
START = start.o
-SOBJS = dcache.o icache.o irq.o disable_int.o enable_int.o
+SOBJS = irq.o
COBJS = cpu.o interrupts.o cache.o exception.o timer.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/microblaze/cache.c b/cpu/microblaze/cache.c
old mode 100644
new mode 100755
index fc388eb..4f36a84
--- a/cpu/microblaze/cache.c
+++ b/cpu/microblaze/cache.c
@@ -23,6 +23,7 @@
*/
#include <common.h>
+#include <asm/asm.h>
#if (CONFIG_COMMANDS & CFG_CMD_CACHE)
@@ -45,4 +46,20 @@
__asm__ __volatile__ ("and %0,%0,%1"::"r" (i), "r" (mask):"memory");
return i;
}
+
+void icache_enable (void) {
+ MSRSET(0x20);
+}
+
+void icache_disable(void) {
+ MSRCLR(0x20);
+}
+
+void dcache_enable (void) {
+ MSRSET(0x80);
+}
+
+void dcache_disable(void) {
+ MSRCLR(0x80);
+}
#endif
diff --git a/cpu/microblaze/dcache.S b/cpu/microblaze/dcache.S
deleted file mode 100644
index eaf9671..0000000
--- a/cpu/microblaze/dcache.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
- .text
- .globl dcache_enable
- .ent dcache_enable
- .align 2
-dcache_enable:
- /* Make space on stack for a temporary */
- addi r1, r1, -4
- /* Save register r12 */
- swi r12, r1, 0
- /* Read the MSR register */
- mfs r12, rmsr
- /* Set the instruction enable bit */
- ori r12, r12, 0x80
- /* Save the MSR register */
- mts rmsr, r12
- /* Load register r12 */
- lwi r12, r1, 0
- /* Return */
- rtsd r15, 8
- /* Update stack in the delay slot */
- addi r1, r1, 4
- .end dcache_enable
-
- .text
- .globl dcache_disable
- .ent dcache_disable
- .align 2
-dcache_disable:
- /* Make space on stack for a temporary */
- addi r1, r1, -4
- /* Save register r12 */
- swi r12, r1, 0
- /* Read the MSR register */
- mfs r12, rmsr
- /* Clear the data cache enable bit */
- andi r12, r12, ~0x80
- /* Save the MSR register */
- mts rmsr, r12
- /* Load register r12 */
- lwi r12, r1, 0
- /* Return */
- rtsd r15, 8
- /* Update stack in the delay slot */
- addi r1, r1, 4
- .end dcache_disable
diff --git a/cpu/microblaze/disable_int.S b/cpu/microblaze/disable_int.S
deleted file mode 100644
index aecd795..0000000
--- a/cpu/microblaze/disable_int.S
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
- .text
- .globl microblaze_disable_interrupts
- .ent microblaze_disable_interrupts
- .align 2
-microblaze_disable_interrupts:
- #Make space on stack for a temporary
- addi r1, r1, -4
- #Save register r12
- swi r12, r1, 0
- #Read the MSR register
- mfs r12, rmsr
- #Clear the interrupt enable bit
- andi r12, r12, ~2
- #Save the MSR register
- mts rmsr, r12
- #Load register r12
- lwi r12, r1, 0
- #Return
- rtsd r15, 8
- #Update stack in the delay slot
- addi r1, r1, 4
- .end microblaze_disable_interrupts
diff --git a/cpu/microblaze/enable_int.S b/cpu/microblaze/enable_int.S
deleted file mode 100644
index c096c6c..0000000
--- a/cpu/microblaze/enable_int.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal SIMEK <monstrmonstr.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
- .text
- .globl microblaze_enable_interrupts
- .ent microblaze_enable_interrupts
- .align 2
-microblaze_enable_interrupts:
- addi r1, r1, -4
- swi r12, r1, 0
- mfs r12, rmsr
- ori r12, r12, 2
- mts rmsr, r12
- lwi r12, r1, 0
- rtsd r15, 8
- addi r1, r1, 4
- .end microblaze_enable_interrupts
diff --git a/cpu/microblaze/exception.c b/cpu/microblaze/exception.c
index b135acb..d76b05a 100644
--- a/cpu/microblaze/exception.c
+++ b/cpu/microblaze/exception.c
@@ -23,15 +23,16 @@
*/
#include <common.h>
+#include <asm/asm.h>
void _hw_exception_handler (void)
{
int address = 0;
int state = 0;
/* loading address of exception EAR */
- __asm__ __volatile ("mfs %0,rear"::"r" (address):"memory");
+ MFS (address, rear);
/* loading excetpion state register ESR */
- __asm__ __volatile ("mfs %0,resr"::"r" (state):"memory");
+ MFS (state, resr);
printf ("Hardware exception at 0x%x address\n", address);
switch (state & 0x1f) { /* mask on exception cause */
case 0x1:
@@ -49,6 +50,11 @@
case 0x5:
puts ("Divide by zero exception\n");
break;
+#ifdef MICROBLAZE_V5
+ case 0x1000:
+ puts ("Exception in delay slot\n");
+ break;
+#endif
default:
puts ("Undefined cause\n");
break;
diff --git a/cpu/microblaze/icache.S b/cpu/microblaze/icache.S
deleted file mode 100644
index 25940d1..0000000
--- a/cpu/microblaze/icache.S
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
- .text
- .globl icache_enable
- .ent icache_enable
- .align 2
-icache_enable:
- /* Make space on stack for a temporary */
- addi r1, r1, -4
- /* Save register r12 */
- swi r12, r1, 0
- /* Read the MSR register */
- mfs r12, rmsr
- /* Set the instruction enable bit */
- ori r12, r12, 0x20
- /* Save the MSR register */
- mts rmsr, r12
- /* Load register r12 */
- lwi r12, r1, 0
- /* Return */
- rtsd r15, 8
- /* Update stack in the delay slot */
- addi r1, r1, 4
- .end icache_enable
-
- .text
- .globl icache_disable
- .ent icache_disable
- .align 2
-icache_disable:
- /* Make space on stack for a temporary */
- addi r1, r1, -4
- /* Save register r12 */
- swi r12, r1, 0
- /* Read the MSR register */
- mfs r12, rmsr
- /* Clear the instruction enable bit */
- andi r12, r12, ~0x20
- /* Save the MSR register */
- mts rmsr, r12
- /* Load register r12 */
- lwi r12, r1, 0
- /* Return */
- rtsd r15, 8
- /* Update stack in the delay slot */
- addi r1, r1, 4
- .end icache_disable
diff --git a/cpu/microblaze/interrupts.c b/cpu/microblaze/interrupts.c
old mode 100644
new mode 100755
index 2db847c..b61153f
--- a/cpu/microblaze/interrupts.c
+++ b/cpu/microblaze/interrupts.c
@@ -27,6 +27,7 @@
#include <common.h>
#include <command.h>
#include <asm/microblaze_intc.h>
+#include <asm/asm.h>
#undef DEBUG_INT
@@ -35,12 +36,12 @@
void enable_interrupts (void)
{
- microblaze_enable_interrupts ();
+ MSRSET(0x2);
}
int disable_interrupts (void)
{
- microblaze_disable_interrupts ();
+ MSRCLR(0x2);
return 0;
}
@@ -48,6 +49,10 @@
#ifdef CFG_TIMER_0
extern void timer_init (void);
#endif
+#ifdef CFG_FSL_2
+extern void fsl_init2 (void);
+#endif
+
static struct irq_action vecs[CFG_INTC_0_NUM];
@@ -106,7 +111,6 @@
act->count = 0;
enable_one_interrupt (irq);
} else { /* disable */
-
act->handler = (interrupt_handler_t *) def_hdlr;
act->arg = (void *)irq;
disable_one_interrupt (irq);
@@ -141,18 +145,22 @@
#ifdef CFG_TIMER_0
timer_init ();
#endif
+#ifdef CFG_FSL_2
+ fsl_init2 ();
+#endif
enable_interrupts ();
return 0;
}
void interrupt_handler (void)
{
- int irqs;
- irqs = (intc->isr & intc->ier); /* find active interrupt */
-
+ int irqs = (intc->isr & intc->ier); /* find active interrupt */
+ int i = 1;
#ifdef DEBUG_INT
+ int value;
printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
intc->iar, intc->mer);
+ R14(value);
printf ("Interrupt handler on %x line, r14 %x\n", irqs, value);
#endif
struct irq_action *act = vecs;
@@ -165,15 +173,19 @@
#endif
act->handler (act->arg);
act->count++;
+ intc->iar = i;
+ return;
}
irqs >>= 1;
act++;
+ i <<= 1;
}
- intc->iar = 0xFFFFFFFF; /* erase all events */
-#ifdef DEBUG
+
+#ifdef DEBUG_INT
printf ("Dump INTC reg, isr %x, ier %x, iar %x, mer %x\n", intc->isr,
intc->ier, intc->iar, intc->mer);
- printf ("Interrupt handler on %x line, r14\n", irqs);
+ R14(value);
+ printf ("Interrupt handler on %x line, r14 %x\n", irqs, value);
#endif
}
#endif
diff --git a/cpu/microblaze/irq.S b/cpu/microblaze/irq.S
old mode 100644
new mode 100755
index a4e3fbf..e1fc190
--- a/cpu/microblaze/irq.S
+++ b/cpu/microblaze/irq.S
@@ -23,6 +23,7 @@
*/
#include <config.h>
+#include <asm/asm.h>
.text
.global _interrupt_handler
_interrupt_handler:
@@ -151,6 +152,11 @@
addi r1, r1, 4
/* enable_interrupt */
+#ifdef XILINX_USE_MSR_INSTR
+ msrset r0, 2
+#else
+ /* FIXME unstable in stressed mode - two irqs */
+ nop
addi r1, r1, -4
swi r12, r1, 0
mfs r12, rmsr
@@ -159,6 +165,7 @@
lwi r12, r1, 0
addi r1, r1, 4
nop
+#endif
bra r14
nop
nop
diff --git a/cpu/microblaze/start.S b/cpu/microblaze/start.S
index ca3befc..3c027ff 100644
--- a/cpu/microblaze/start.S
+++ b/cpu/microblaze/start.S
@@ -117,3 +117,36 @@
3: /* jumping to board_init */
brai board_init
1: bri 1b
+
+/*
+ * Read 16bit little endian
+ */
+ .text
+ .global in16
+ .ent in16
+ .align 2
+in16: lhu r3, r0, r5
+ bslli r4, r3, 8
+ bsrli r3, r3, 8
+ andi r4, r4, 0xffff
+ or r3, r3, r4
+ rtsd r15, 8
+ sext16 r3, r3
+ .end in16
+
+/*
+ * Write 16bit little endian
+ * first parameter(r5) - address, second(r6) - short value
+ */
+ .text
+ .global out16
+ .ent out16
+ .align 2
+out16: bslli r3, r6, 8
+ bsrli r6, r6, 8
+ andi r3, r3, 0xffff
+ or r3, r3, r6
+ sh r3, r0, r5
+ rtsd r15, 8
+ or r0, r0, r0
+ .end out16
diff --git a/cpu/microblaze/timer.c b/cpu/microblaze/timer.c
index be4fd57..ab1cb12 100644
--- a/cpu/microblaze/timer.c
+++ b/cpu/microblaze/timer.c
@@ -24,6 +24,7 @@
#include <common.h>
#include <asm/microblaze_timer.h>
+#include <asm/microblaze_intc.h>
volatile int timestamp = 0;
@@ -44,9 +45,6 @@
#ifdef CFG_INTC_0
#ifdef CFG_TIMER_0
-extern void install_interrupt_handler (int irq, interrupt_handler_t * hdlr,
- void *arg);
-
microblaze_timer_t *tmr = (microblaze_timer_t *) (CFG_TIMER_0_ADDR);
void timer_isr (void *arg)
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index 813aa79..1eac2bb 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -53,12 +53,16 @@
#else
svr = get_svr();
pvr = get_pvr();
- switch (SVR_VER (svr)) {
- case SVR_MPC5200:
- printf ("MPC5200");
+
+ switch (pvr) {
+ case PVR_5200:
+ printf("MPC5200");
+ break;
+ case PVR_5200B:
+ printf("MPC5200B");
break;
default:
- printf ("MPC52?? (SVR %08x)", svr);
+ printf("Unknown MPC5xxx");
break;
}
@@ -127,5 +131,9 @@
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/mac-address", &len);
if (p != NULL)
memcpy(p, bd->bi_enetaddr, 6);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/local-mac-address", &len);
+ if (p != NULL)
+ memcpy(p, bd->bi_enetaddr, 6);
}
#endif
diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
index 7e65821..d744030 100644
--- a/cpu/mpc5xxx/cpu_init.c
+++ b/cpu/mpc5xxx/cpu_init.c
@@ -156,21 +156,21 @@
*(vu_long *)(MPC5XXX_XLBARB + 0x40) |= (1 << 15);
*(vu_long *)(MPC5XXX_XLBARB + 0x70) = CFG_SDRAM_BASE | 0x1d;
-# if defined(CFG_IPBSPEED_133)
+# if defined(CFG_IPBCLK_EQUALS_XLBCLK)
/* Motorola reports IPB should better run at 133 MHz. */
*(vu_long *)MPC5XXX_ADDECR |= 1;
/* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */
addecr = *(vu_long *)MPC5XXX_CDM_CFG;
addecr &= ~0x103;
-# if defined(CFG_PCISPEED_66)
+# if defined(CFG_PCICLK_EQUALS_IPBCLK_DIV2)
/* pci_clk_sel = 0x01 -> IPB_CLK/2 */
addecr |= 0x01;
# else
/* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */
addecr |= 0x02;
-# endif /* CFG_PCISPEED_66 */
+# endif /* CFG_PCICLK_EQUALS_IPBCLK_DIV2 */
*(vu_long *)MPC5XXX_CDM_CFG = addecr;
-# endif /* CFG_IPBSPEED_133 */
+# endif /* CFG_IPBCLK_EQUALS_XLBCLK */
/* Configure the XLB Arbiter */
*(vu_long *)MPC5XXX_XLBARB_MPRIEN = 0xff;
*(vu_long *)MPC5XXX_XLBARB_MPRIVAL = 0x11111111;
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index e59bd85..8136366 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -428,6 +428,13 @@
*/
fec->eth->imask = 0x00000000;
+/*
+ * In original Promess-provided code PHY initialization is disabled with the
+ * following comment: "Phy initialization is DISABLED for now. There was a
+ * problem with running 100 Mbps on PRO board". Thus we temporarily disable
+ * PHY initialization for the Motion-PRO board, until a proper fix is found.
+ */
+
if (fec->xcv_type != SEVENWIRE) {
/*
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
index 4b9dcc8..bb96f77 100644
--- a/cpu/mpc83xx/Makefile
+++ b/cpu/mpc83xx/Makefile
@@ -29,7 +29,7 @@
START = start.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
- spd_sdram.o qe_io.o
+ spd_sdram.o qe_io.o pci.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 21b1646..e078f27 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -52,13 +52,26 @@
immr = (immap_t *)CFG_IMMR;
- if ((pvr & 0xFFFF0000) != PVR_83xx) {
- puts("Not MPC83xx Family!!!\n");
- return -1;
+ puts("CPU: ");
+
+ switch (pvr & 0xffff0000) {
+ case PVR_E300C1:
+ printf("e300c1, ");
+ break;
+
+ case PVR_E300C2:
+ printf("e300c2, ");
+ break;
+
+ case PVR_E300C3:
+ printf("e300c3, ");
+ break;
+
+ default:
+ printf("Unknown core, ");
}
spridr = immr->sysconf.spridr;
- puts("CPU: ");
switch(spridr) {
case SPR_8349E_REV10:
case SPR_8349E_REV11:
@@ -124,6 +137,18 @@
case SPR_8321_REV11:
puts("MPC8321, ");
break;
+ case SPR_8311_REV10:
+ puts("MPC8311, ");
+ break;
+ case SPR_8311E_REV10:
+ puts("MPC8311E, ");
+ break;
+ case SPR_8313_REV10:
+ puts("MPC8313, ");
+ break;
+ case SPR_8313E_REV10:
+ puts("MPC8313E, ");
+ break;
default:
puts("Rev: Unknown revision number.\nWarning: Unsupported cpu revision!\n");
return 0;
@@ -133,10 +158,12 @@
/* Multiple revisons of 834x processors may have the same SPRIDR value.
* So use PVR to identify the revision number.
*/
- printf("Rev: %02x at %s MHz\n", PVR_MAJ(pvr)<<4 | PVR_MIN(pvr), strmhz(buf, clock));
+ printf("Rev: %02x at %s MHz", PVR_MAJ(pvr)<<4 | PVR_MIN(pvr), strmhz(buf, clock));
#else
- printf("Rev: %02x at %s MHz\n", spridr & 0x0000FFFF, strmhz(buf, clock));
+ printf("Rev: %02x at %s MHz", spridr & 0x0000FFFF, strmhz(buf, clock));
#endif
+ printf(", CSB: %4d MHz\n", gd->csb_clk / 1000000);
+
return 0;
}
@@ -300,92 +327,174 @@
#if defined(CONFIG_OF_LIBFDT)
/*
+ * "Setter" functions used to add/modify FDT entries.
+ */
+static int fdt_set_eth0(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+{
+ /*
+ * Fix it up if it exists, don't create it if it doesn't exist.
+ */
+ if (fdt_get_property(fdt, nodeoffset, name, 0)) {
+ return fdt_setprop(fdt, nodeoffset, name, bd->bi_enetaddr, 6);
+ }
+ return -FDT_ERR_NOTFOUND;
+}
+#ifdef CONFIG_HAS_ETH1
+/* second onboard ethernet port */
+static int fdt_set_eth1(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+{
+ /*
+ * Fix it up if it exists, don't create it if it doesn't exist.
+ */
+ if (fdt_get_property(fdt, nodeoffset, name, 0)) {
+ return fdt_setprop(fdt, nodeoffset, name, bd->bi_enet1addr, 6);
+ }
+ return -FDT_ERR_NOTFOUND;
+}
+#endif
+#ifdef CONFIG_HAS_ETH2
+/* third onboard ethernet port */
+static int fdt_set_eth2(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+{
+ /*
+ * Fix it up if it exists, don't create it if it doesn't exist.
+ */
+ if (fdt_get_property(fdt, nodeoffset, name, 0)) {
+ return fdt_setprop(fdt, nodeoffset, name, bd->bi_enet2addr, 6);
+ }
+ return -FDT_ERR_NOTFOUND;
+}
+#endif
+#ifdef CONFIG_HAS_ETH3
+/* fourth onboard ethernet port */
+static int fdt_set_eth3(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+{
+ /*
+ * Fix it up if it exists, don't create it if it doesn't exist.
+ */
+ if (fdt_get_property(fdt, nodeoffset, name, 0)) {
+ return fdt_setprop(fdt, nodeoffset, name, bd->bi_enet3addr, 6);
+ }
+ return -FDT_ERR_NOTFOUND;
+}
+#endif
+
+static int fdt_set_busfreq(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+{
+ u32 tmp;
+ /*
+ * Create or update the property.
+ */
+ tmp = cpu_to_be32(bd->bi_busfreq);
+ return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+/*
* Fixups to the fdt. If "create" is TRUE, the node is created
* unconditionally. If "create" is FALSE, the node is updated
* only if it already exists.
*/
-#define FT_UPDATE 0x00000000 /* update existing property only */
-#define FT_CREATE 0x00000001 /* create property if it doesn't exist */
-#define FT_BUSFREQ 0x00000002 /* source is bd->bi_busfreq */
-#define FT_ENETADDR 0x00000004 /* source is bd->bi_enetaddr */
static const struct {
- int createflags;
char *node;
char *prop;
+ int (*set_fn)(void *fdt, int nodeoffset, const char *name, bd_t *bd);
} fixup_props[] = {
- { FT_CREATE | FT_BUSFREQ,
- "/cpus/" OF_CPU,
+ { "/cpus/" OF_CPU,
"bus-frequency",
+ fdt_set_busfreq
},
- { FT_CREATE | FT_BUSFREQ,
- "/cpus/" OF_SOC,
- "bus-frequency"
+ { "/cpus/" OF_SOC,
+ "bus-frequency",
+ fdt_set_busfreq
},
- { FT_CREATE | FT_BUSFREQ,
- "/" OF_SOC "/serial@4500/",
- "clock-frequency"
+ { "/" OF_SOC "/serial@4500/",
+ "clock-frequency",
+ fdt_set_busfreq
},
- { FT_CREATE | FT_BUSFREQ,
- "/" OF_SOC "/serial@4600/",
- "clock-frequency"
+ { "/" OF_SOC "/serial@4600/",
+ "clock-frequency",
+ fdt_set_busfreq
},
#ifdef CONFIG_MPC83XX_TSEC1
- { FT_UPDATE | FT_ENETADDR,
- "/" OF_SOC "/ethernet@24000,
+ { "/" OF_SOC "/ethernet@24000,
"mac-address",
+ fdt_set_eth0
},
- { FT_UPDATE | FT_ENETADDR,
- "/" OF_SOC "/ethernet@24000,
+ { "/" OF_SOC "/ethernet@24000,
"local-mac-address",
+ fdt_set_eth0
},
#endif
#ifdef CONFIG_MPC83XX_TSEC2
- { FT_UPDATE | FT_ENETADDR,
- "/" OF_SOC "/ethernet@25000,
+ { "/" OF_SOC "/ethernet@25000,
"mac-address",
+ fdt_set_eth1
},
- { FT_UPDATE | FT_ENETADDR,
- "/" OF_SOC "/ethernet@25000,
+ { "/" OF_SOC "/ethernet@25000,
"local-mac-address",
+ fdt_set_eth1
},
#endif
+#ifdef CONFIG_UEC_ETH1
+#if CFG_UEC1_UCC_NUM == 0 /* UCC1 */
+ { "/" OF_QE "/ucc@2000/mac-address",
+ "mac-address",
+ fdt_set_eth0
+ },
+ { "/" OF_QE "/ucc@2000/mac-address",
+ "local-mac-address",
+ fdt_set_eth0
+ },
+#elif CFG_UEC1_UCC_NUM == 2 /* UCC3 */
+ { "/" OF_QE "/ucc@2200/mac-address",
+ "mac-address",
+ fdt_set_eth0
+ },
+ { "/" OF_QE "/ucc@2200/mac-address",
+ "local-mac-address",
+ fdt_set_eth0
+ },
+#endif
+#endif
+#ifdef CONFIG_UEC_ETH2
+#if CFG_UEC2_UCC_NUM == 1 /* UCC2 */
+ { "/" OF_QE "/ucc@3000/mac-address",
+ "mac-address",
+ fdt_set_eth1
+ },
+ { "/" OF_QE "/ucc@3000/mac-address",
+ "local-mac-address",
+ fdt_set_eth1
+ },
+#elif CFG_UEC1_UCC_NUM == 3 /* UCC4 */
+ { "/" OF_QE "/ucc@3200/mac-address",
+ "mac-address",
+ fdt_set_eth1
+ },
+ { "/" OF_QE "/ucc@3200/mac-address",
+ "local-mac-address",
+ fdt_set_eth1
+ },
+#endif
+#endif
};
void
ft_cpu_setup(void *blob, bd_t *bd)
{
- int nodeoffset;
- int err;
- int j;
+ int nodeoffset;
+ int err;
+ int j;
for (j = 0; j < (sizeof(fixup_props) / sizeof(fixup_props[0])); j++) {
- nodeoffset = fdt_path_offset (fdt, fixup_props[j].node);
+ nodeoffset = fdt_path_offset(fdt, fixup_props[j].node);
if (nodeoffset >= 0) {
- /*
- * If unconditional create or the property already exists...
- */
- if ((fixup_props[j].createflags & FT_CREATE) ||
- (fdt_get_property(fdt, nodeoffset, fixup_props[j].prop, 0))) {
- if (fixup_props[j].createflags & FT_BUSFREQ) {
- u32 tmp;
-
- tmp = cpu_to_be32(bd->bi_busfreq);
- err = fdt_setprop(fdt, nodeoffset,
- fixup_props[j].prop, &tmp, sizeof(tmp));
- } else if (fixup_props[j].createflags & FT_ENETADDR) {
- err = fdt_setprop(fdt, nodeoffset,
- fixup_props[j].prop, bd->bi_enetaddr, 6);
- } else {
- printf("ft_cpu_setup: %s %s has no flag for the value to set\n",
- fixup_props[j].node,
- fixup_props[j].prop);
- }
- if (err < 0)
- printf("libfdt: %s %s returned %s\n",
- fixup_props[j].node,
- fixup_props[j].prop,
- fdt_strerror(err));
- }
+ err = (*fixup_props[j].set_fn)(blob, nodeoffset, fixup_props[j].prop, bd);
+ if (err < 0)
+ printf("set_fn/libfdt: %s %s returned %s\n",
+ fixup_props[j].node,
+ fixup_props[j].prop,
+ fdt_strerror(err));
}
}
}
diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
new file mode 100644
index 0000000..785d612
--- /dev/null
+++ b/cpu/mpc83xx/pci.c
@@ -0,0 +1,192 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2007
+ *
+ * Author: Scott Wood <scottwood@freescale.com>,
+ * with some bits from older board-specific PCI initialization.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <ft_build.h>
+#include <asm/mpc8349_pci.h>
+
+#ifdef CONFIG_83XX_GENERIC_PCI
+#define MAX_BUSES 2
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pci_controller pci_hose[MAX_BUSES];
+static int pci_num_buses;
+
+static void pci_init_bus(int bus, struct pci_region *reg)
+{
+ volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+ volatile pot83xx_t *pot = immr->ios.pot;
+ volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus];
+ struct pci_controller *hose = &pci_hose[bus];
+ u32 dev;
+ u16 reg16;
+ int i;
+
+ if (bus == 1)
+ pot += 3;
+
+ /* Setup outbound translation windows */
+ for (i = 0; i < 3; i++, reg++, pot++) {
+ if (reg->size == 0)
+ break;
+
+ hose->regions[i] = *reg;
+ hose->region_count++;
+
+ pot->potar = reg->bus_start >> 12;
+ pot->pobar = reg->phys_start >> 12;
+ pot->pocmr = ~(reg->size - 1) >> 12;
+
+ if (reg->flags & PCI_REGION_IO)
+ pot->pocmr |= POCMR_IO;
+#ifdef CONFIG_83XX_PCI_STREAMING
+ else if (reg->flags & PCI_REGION_PREFETCH)
+ pot->pocmr |= POCMR_SE;
+#endif
+
+ if (bus == 1)
+ pot->pocmr |= POCMR_DST;
+
+ pot->pocmr |= POCMR_EN;
+ }
+
+ /* Point inbound translation at RAM */
+ pci_ctrl->pitar1 = 0;
+ pci_ctrl->pibar1 = 0;
+ pci_ctrl->piebar1 = 0;
+ pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
+ PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
+
+ i = hose->region_count++;
+ hose->regions[i].bus_start = 0;
+ hose->regions[i].phys_start = 0;
+ hose->regions[i].size = gd->ram_size;
+ hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_MEMORY;
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ pci_setup_indirect(hose, CFG_IMMR + 0x8300 + bus * 0x80,
+ CFG_IMMR + 0x8304 + bus * 0x80);
+
+ pci_register_hose(hose);
+
+ /*
+ * Write to Command register
+ */
+ reg16 = 0xff;
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+ pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+}
+
+/*
+ * The caller must have already set OCCR, and the PCI_LAW BARs
+ * must have been set to cover all of the requested regions.
+ *
+ * If fewer than three regions are requested, then the region
+ * list is terminated with a region of size 0.
+ */
+void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot)
+{
+ volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+ int i;
+
+ if (num_buses > MAX_BUSES) {
+ printf("%d PCI buses requsted, %d supported\n",
+ num_buses, MAX_BUSES);
+
+ num_buses = MAX_BUSES;
+ }
+
+ pci_num_buses = num_buses;
+
+ /*
+ * Release PCI RST Output signal.
+ * Power on to RST high must be at least 100 ms as per PCI spec.
+ * On warm boots only 1 ms is required.
+ */
+ udelay(warmboot ? 1000 : 100000);
+
+ for (i = 0; i < num_buses; i++)
+ immr->pci_ctrl[i].gcr = 1;
+
+ /*
+ * RST high to first config access must be at least 2^25 cycles
+ * as per PCI spec. This could be cut in half if we know we're
+ * running at 66MHz. This could be insufficiently long if we're
+ * running the PCI bus at significantly less than 33MHz.
+ */
+ udelay(1020000);
+
+ for (i = 0; i < num_buses; i++)
+ pci_init_bus(i, reg[i]);
+}
+
+#ifdef CONFIG_OF_FLAT_TREE
+void ft_pci_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ if (pci_num_buses < 1)
+ return;
+
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
+ if (p) {
+ p[0] = pci_hose[0].first_busno;
+ p[1] = pci_hose[0].last_busno;
+ }
+
+ if (pci_num_buses < 2)
+ return;
+
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
+ if (p) {
+ p[0] = pci_hose[1].first_busno;
+ p[1] = pci_hose[1].last_busno;
+ }
+}
+#endif /* CONFIG_OF_FLAT_TREE */
+
+#endif /* CONFIG_83XX_GENERIC_PCI */
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index d9b8753..647813f 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -58,8 +58,8 @@
int clks;
ddr_bus_clk = gd->ddr_clk >> 1;
- clks = picos / ((1000000000 / ddr_bus_clk) * 1000);
- if (picos % ((1000000000 / ddr_bus_clk) * 1000) != 0)
+ clks = picos / (1000000000 / (ddr_bus_clk / 1000));
+ if (picos % (1000000000 / (ddr_bus_clk / 1000)) != 0)
clks++;
return clks;
@@ -624,7 +624,7 @@
| (1 << (16 + 10)) /* DQS Differential disable */
| (add_lat << (16 + 3)) /* Additive Latency in EMRS1 */
| (mode_odt_enable << 16) /* ODT Enable in EMRS1 */
- | ((twr_clk >> 1) << 9) /* Write Recovery Autopre */
+ | ((twr_clk - 1) << 9) /* Write Recovery Autopre */
| (caslat << 4) /* caslat */
| (burstlen << 0) /* Burst length */
);
@@ -693,11 +693,6 @@
#ifdef CFG_DDR_SDRAM_CLK_CNTL /* Optional platform specific value */
ddr->sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
-#else
- /* SS_EN = 0, source synchronous disable
- * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd
- */
- ddr->sdram_clk_cntl = 0x00000000;
#endif
debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index c759930..bf30616 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -25,6 +25,7 @@
#include <common.h>
#include <mpc83xx.h>
+#include <command.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -99,12 +100,14 @@
u32 lcrr;
u32 csb_clk;
-#if defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
u32 tsec1_clk;
u32 tsec2_clk;
- u32 usbmph_clk;
u32 usbdr_clk;
#endif
+#ifdef CONFIG_MPC834X
+ u32 usbmph_clk;
+#endif
u32 core_clk;
u32 i2c1_clk;
#if !defined(CONFIG_MPC832X)
@@ -148,7 +151,7 @@
sccr = im->clk.sccr;
-#if defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
case 0:
tsec1_clk = 0;
@@ -167,6 +170,26 @@
return -4;
}
+ switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
+ case 0:
+ usbdr_clk = 0;
+ break;
+ case 1:
+ usbdr_clk = csb_clk;
+ break;
+ case 2:
+ usbdr_clk = csb_clk / 2;
+ break;
+ case 3:
+ usbdr_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_USBDRCM value */
+ return -8;
+ }
+#endif
+
+#if defined(CONFIG_MPC834X)
switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
case 0:
tsec2_clk = 0;
@@ -205,24 +228,6 @@
return -7;
}
- switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
- case 0:
- usbdr_clk = 0;
- break;
- case 1:
- usbdr_clk = csb_clk;
- break;
- case 2:
- usbdr_clk = csb_clk / 2;
- break;
- case 3:
- usbdr_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_USBDRCM value */
- return -8;
- }
-
if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
/* if USB MPH clock is not disabled and
* USB DR clock is not disabled then
@@ -230,8 +235,16 @@
*/
return -9;
}
+#elif defined(CONFIG_MPC831X)
+ tsec2_clk = tsec1_clk;
+
+ if (!(sccr & SCCR_TSEC1ON))
+ tsec1_clk = 0;
+ if (!(sccr & SCCR_TSEC2ON))
+ tsec2_clk = 0;
#endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+
+#if !defined(CONFIG_MPC834X)
i2c1_clk = csb_clk;
#endif
#if !defined(CONFIG_MPC832X)
@@ -314,12 +327,14 @@
#endif
gd->csb_clk = csb_clk;
-#if defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
gd->tsec1_clk = tsec1_clk;
gd->tsec2_clk = tsec2_clk;
- gd->usbmph_clk = usbmph_clk;
gd->usbdr_clk = usbdr_clk;
#endif
+#if defined(CONFIG_MPC834X)
+ gd->usbmph_clk = usbmph_clk;
+#endif
gd->core_clk = core_clk;
gd->i2c1_clk = i2c1_clk;
#if !defined(CONFIG_MPC832X)
@@ -351,11 +366,11 @@
return gd->csb_clk;
}
-int print_clock_conf(void)
+int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
printf("Clock configuration:\n");
- printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
printf(" Core: %4d MHz\n", gd->core_clk / 1000000);
+ printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
printf(" QE: %4d MHz\n", gd->qe_clk / 1000000);
printf(" BRG: %4d MHz\n", gd->brg_clk / 1000000);
@@ -371,11 +386,18 @@
#if !defined(CONFIG_MPC832X)
printf(" I2C2: %4d MHz\n", gd->i2c2_clk / 1000000);
#endif
-#if defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
printf(" TSEC1: %4d MHz\n", gd->tsec1_clk / 1000000);
printf(" TSEC2: %4d MHz\n", gd->tsec2_clk / 1000000);
- printf(" USB MPH: %4d MHz\n", gd->usbmph_clk / 1000000);
printf(" USB DR: %4d MHz\n", gd->usbdr_clk / 1000000);
#endif
+#if defined(CONFIG_MPC834X)
+ printf(" USB MPH: %4d MHz\n", gd->usbmph_clk / 1000000);
+#endif
return 0;
}
+
+U_BOOT_CMD(clocks, 1, 0, do_clocks,
+ "clocks - print clock configuration\n",
+ " clocks\n"
+);
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 0507c47..7735a52 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004,2007 Freescale Semiconductor, Inc.
* (C) Copyright 2002, 2003 Motorola Inc.
* Xianghua Xiao (X.Xiao@motorola.com)
*
@@ -70,6 +70,15 @@
case SVR_8548_E:
puts("8548_E");
break;
+ case SVR_8544:
+ puts("8544");
+ break;
+ case SVR_8544_E:
+ puts("8544_E");
+ break;
+ case SVR_8568_E:
+ puts("8568_E");
+ break;
default:
puts("Unknown");
break;
@@ -112,7 +121,7 @@
#endif
clkdiv = lcrr & 0x0f;
if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
-#ifdef CONFIG_MPC8548
+#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544)
/*
* Yes, the entire PQ38 family use the same
* bit-representation for twice the clock divider values.
@@ -140,16 +149,25 @@
int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
{
+ uint pvr;
+ uint ver;
+ pvr = get_pvr();
+ ver = PVR_VER(pvr);
+ if (ver & 1){
+ /* e500 v2 core has reset control register */
+ volatile unsigned int * rstcr;
+ rstcr = (volatile unsigned int *)(CFG_IMMR + 0xE00B0);
+ *rstcr = 0x2; /* HRESET_REQ */
+ }else{
/*
* Initiate hard reset in debug control register DBCR0
* Make sure MSR[DE] = 1
*/
- unsigned long val;
-
- val = mfspr(DBCR0);
- val |= 0x70000000;
- mtspr(DBCR0,val);
-
+ unsigned long val;
+ val = mfspr(DBCR0);
+ val |= 0x70000000;
+ mtspr(DBCR0,val);
+ }
return 1;
}
@@ -183,9 +201,9 @@
* Clear TSR(WIS) bit by writing 1
*/
unsigned long val;
- val = mfspr(tsr);
- val |= 0x40000000;
- mtspr(tsr, val);
+ val = mfspr(SPRN_TSR);
+ val |= TSR_WIS;
+ mtspr(SPRN_TSR, val);
}
#endif /* CONFIG_WATCHDOG */
@@ -196,6 +214,7 @@
dma->satr0 = 0x02c40000;
dma->datr0 = 0x02c40000;
+ dma->sr0 = 0xfffffff; /* clear any errors */
asm("sync; isync; msync");
return;
}
@@ -210,6 +229,10 @@
status = dma->sr0;
}
+ /* clear MR0[CS] channel start bit */
+ dma->mr0 &= 0x00000001;
+ asm("sync;isync;msync");
+
if (status != 0) {
printf ("DMA Error: status = %x\n", status);
}
@@ -245,6 +268,10 @@
if (p != NULL)
*p = cpu_to_be32(clock);
+ p = ft_get_prop(blob, "/qe@e0080000/" OF_CPU "/bus-frequency", &len);
+ if (p != NULL)
+ *p = cpu_to_be32(clock);
+
p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
if (p != NULL)
*p = cpu_to_be32(clock);
@@ -255,21 +282,41 @@
#if defined(CONFIG_MPC85XX_TSEC1)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
+ if (p)
+ memcpy(p, bd->bi_enetaddr, 6);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
+ if (p)
memcpy(p, bd->bi_enetaddr, 6);
#endif
#if defined(CONFIG_HAS_ETH1)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
+ if (p)
+ memcpy(p, bd->bi_enet1addr, 6);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
+ if (p)
memcpy(p, bd->bi_enet1addr, 6);
#endif
#if defined(CONFIG_HAS_ETH2)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
+ if (p)
+ memcpy(p, bd->bi_enet2addr, 6);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len);
+ if (p)
memcpy(p, bd->bi_enet2addr, 6);
#endif
#if defined(CONFIG_HAS_ETH3)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
+ if (p)
+ memcpy(p, bd->bi_enet3addr, 6);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len);
+ if (p)
memcpy(p, bd->bi_enet3addr, 6);
#endif
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index 9f4d36c..9517146 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -143,12 +143,10 @@
memctl->br1 = CFG_BR1_PRELIM;
#endif
-#if !defined(CONFIG_MPC85xx)
#if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
memctl->or2 = CFG_OR2_PRELIM;
memctl->br2 = CFG_BR2_PRELIM;
#endif
-#endif
#if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM)
memctl->or3 = CFG_OR3_PRELIM;
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index 84f839a..3c1a323 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -90,14 +90,14 @@
pcix->powbar1 = (CFG_PCI1_MEM_PHYS >> 12) & 0x000fffff;
pcix->powbear1 = 0x00000000;
pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
- POWAR_MEM_WRITE | POWAR_MEM_512M);
+ POWAR_MEM_WRITE | (__ilog2(CFG_PCI1_MEM_SIZE) - 1));
pcix->potar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
pcix->potear2 = 0x00000000;
pcix->powbar2 = (CFG_PCI1_IO_PHYS >> 12) & 0x000fffff;
pcix->powbear2 = 0x00000000;
pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
- POWAR_IO_WRITE | POWAR_IO_1M);
+ POWAR_IO_WRITE | (__ilog2(CFG_PCI1_IO_SIZE) - 1));
pcix->pitar1 = 0x00000000;
pcix->piwbar1 = 0x00000000;
@@ -175,14 +175,14 @@
pcix2->powbar1 = (CFG_PCI2_MEM_PHYS >> 12) & 0x000fffff;
pcix2->powbear1 = 0x00000000;
pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
- POWAR_MEM_WRITE | POWAR_MEM_512M);
+ POWAR_MEM_WRITE | (__ilog2(CFG_PCI2_MEM_SIZE) - 1));
pcix2->potar2 = (CFG_PCI2_IO_BASE >> 12) & 0x000fffff;
pcix2->potear2 = 0x00000000;
pcix2->powbar2 = (CFG_PCI2_IO_PHYS >> 12) & 0x000fffff;
pcix2->powbear2 = 0x00000000;
pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
- POWAR_IO_WRITE | POWAR_IO_1M);
+ POWAR_IO_WRITE | (__ilog2(CFG_PCI2_IO_SIZE) - 1));
pcix2->pitar1 = 0x00000000;
pcix2->piwbar1 = 0x00000000;
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index 6da5367..3777f49 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -263,13 +263,14 @@
}
/*
- * Adjust DDR II IO voltage biasing. It just makes it work.
+ * Adjust DDR II IO voltage biasing.
+ * Only 8548 rev 1 needs the fix
*/
- if (spd.mem_type == SPD_MEMTYPE_DDR2) {
- gur->ddrioovcr = (0
- | 0x80000000 /* Enable */
- | 0x10000000 /* VSEL to 1.8V */
- );
+ if ((SVR_VER(get_svr()) == SVR_8548_E) &&
+ (SVR_MJREV(get_svr()) == 1) &&
+ (spd.mem_type == SPD_MEMTYPE_DDR2)) {
+ gur->ddrioovcr = (0x80000000 /* Enable */
+ | 0x10000000);/* VSEL to 1.8V */
}
/*
@@ -786,14 +787,17 @@
* Is this an ECC DDR chip?
* But don't mess with it if the DDR controller will init mem.
*/
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+#ifdef CONFIG_DDR_ECC
if (spd.config == 0x02) {
+#ifndef CONFIG_ECC_INIT_VIA_DDRCONTROLLER
ddr->err_disable = 0x0000000d;
+#endif
ddr->err_sbe = 0x00ff0000;
}
+
debug("DDR: err_disable = 0x%08x\n", ddr->err_disable);
debug("DDR: err_sbe = 0x%08x\n", ddr->err_sbe);
-#endif
+#endif /* CONFIG_DDR_ECC */
asm("sync;isync;msync");
udelay(500);
@@ -991,17 +995,24 @@
break;
case 256:
case 512:
+ tlb_size = BOOKE_PAGESZ_256M;
+ break;
case 1024:
case 2048:
- tlb_size = BOOKE_PAGESZ_256M;
+ if (PVR_VER(get_pvr()) > PVR_VER(PVR_85xx))
+ tlb_size = BOOKE_PAGESZ_1G;
+ else
+ tlb_size = BOOKE_PAGESZ_256M;
break;
default:
puts("DDR: only 16M,32M,64M,128M,256M,512M,1G and 2G are supported.\n");
/*
* The memory was not able to be mapped.
+ * Default to a small size.
*/
- return 0;
+ tlb_size = BOOKE_PAGESZ_64M;
+ memsize=64;
break;
}
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index ca81ee7..12359a2 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -37,49 +37,21 @@
{
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_gur_t *gur = &immap->im_gur;
- uint plat_ratio,e500_ratio;
+ uint plat_ratio,e500_ratio,half_freqSystemBus;
plat_ratio = (gur->porpllsr) & 0x0000003e;
plat_ratio >>= 1;
- switch(plat_ratio) {
- case 0x02:
- case 0x03:
- case 0x04:
- case 0x05:
- case 0x06:
- case 0x08:
- case 0x09:
- case 0x0a:
- case 0x0c:
- case 0x10:
- sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
- break;
- default:
- sysInfo->freqSystemBus = 0;
- break;
- }
-
+ sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
e500_ratio = (gur->porpllsr) & 0x003f0000;
e500_ratio >>= 16;
- switch(e500_ratio) {
- case 0x04:
- sysInfo->freqProcessor = 2*sysInfo->freqSystemBus;
- break;
- case 0x05:
- sysInfo->freqProcessor = 5*sysInfo->freqSystemBus/2;
- break;
- case 0x06:
- sysInfo->freqProcessor = 3*sysInfo->freqSystemBus;
- break;
- case 0x07:
- sysInfo->freqProcessor = 7*sysInfo->freqSystemBus/2;
- break;
- default:
- sysInfo->freqProcessor = 0;
- break;
- }
+
+ /* Divide before multiply to avoid integer
+ * overflow for processor speeds above 2GHz */
+ half_freqSystemBus = sysInfo->freqSystemBus/2;
+ sysInfo->freqProcessor = e500_ratio*half_freqSystemBus;
}
+
int get_clocks (void)
{
sys_info_t sys_info;
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index f96a4c3..20c7ebc 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -251,13 +251,10 @@
*/
bl tlb1_entry
mr r5,r0
- li r1,0x0020 /* max 16 TLB1 plus some TLB0 entries */
- mtctr r1
lwzu r4,0(r5) /* how many TLB1 entries we actually use */
+ mtctr r4
-0: cmpwi r4,0
- beq 1f
- lwzu r0,4(r5)
+0: lwzu r0,4(r5)
lwzu r1,4(r5)
lwzu r2,4(r5)
lwzu r3,4(r5)
@@ -269,7 +266,6 @@
msync
tlbwe
isync
- addi r4,r4,-1
bdnz 0b
1:
@@ -301,20 +297,16 @@
bl law_entry
mr r6,r0
- li r1,0x0007 /* 8 LAWs, but reserve one for boot-over-rio-or-pci */
- mtctr r1
lwzu r5,0(r6) /* how many windows we actually use */
+ mtctr r5
li r2,0x0c28 /* the first pair is reserved for boot-over-rio-or-pci */
li r1,0x0c30
-0: cmpwi r5,0
- beq 1f
- lwzu r4,4(r6)
+0: lwzu r4,4(r6)
lwzu r3,4(r6)
stwx r4,r7,r2
stwx r3,r7,r1
- addi r5,r5,-1
addi r2,r2,0x0020
addi r1,r1,0x0020
bdnz 0b
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
index 551b243..a33acfe 100644
--- a/cpu/mpc86xx/cpu.c
+++ b/cpu/mpc86xx/cpu.c
@@ -32,12 +32,6 @@
#include <ft_build.h>
#endif
-#ifdef CONFIG_MPC8641HPCN
-extern void mpc8641_reset_board(cmd_tbl_t *cmdtp, int flag,
- int argc, char *argv[]);
-#endif
-
-
int
checkcpu(void)
{
@@ -185,7 +179,7 @@
#else /* CONFIG_MPC8641HPCN */
- mpc8641_reset_board(cmdtp, flag, argc, argv);
+ out8(PIXIS_BASE + PIXIS_RST, 0);
#endif /* !CONFIG_MPC8641HPCN */
@@ -286,22 +280,38 @@
#if defined(CONFIG_MPC86XX_TSEC1)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
- memcpy(p, bd->bi_enetaddr, 6);
+ if (p != NULL)
+ memcpy(p, bd->bi_enetaddr, 6);
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
+ if (p)
+ memcpy(p, bd->bi_enetaddr, 6);
#endif
#if defined(CONFIG_MPC86XX_TSEC2)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
- memcpy(p, bd->bi_enet1addr, 6);
+ if (p != NULL)
+ memcpy(p, bd->bi_enet1addr, 6);
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
+ if (p != NULL)
+ memcpy(p, bd->bi_enet1addr, 6);
#endif
#if defined(CONFIG_MPC86XX_TSEC3)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
- memcpy(p, bd->bi_enet2addr, 6);
+ if (p != NULL)
+ memcpy(p, bd->bi_enet2addr, 6);
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len);
+ if (p != NULL)
+ memcpy(p, bd->bi_enet2addr, 6);
#endif
#if defined(CONFIG_MPC86XX_TSEC4)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
- memcpy(p, bd->bi_enet3addr, 6);
+ if (p != NULL)
+ memcpy(p, bd->bi_enet3addr, 6);
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len);
+ if (p != NULL)
+ memcpy(p, bd->bi_enet3addr, 6);
#endif
}
diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c
index ac9ff81..f37ab43 100644
--- a/cpu/mpc86xx/spd_sdram.c
+++ b/cpu/mpc86xx/spd_sdram.c
@@ -51,20 +51,32 @@
#define CFG_SUPER_BANK_INTERLEAVING 0
/*
- * Convert picoseconds into clock cycles (rounding up if needed).
+ * Convert picoseconds into DRAM clock cycles (rounding up if needed).
*/
-int
-picos_to_clk(int picos)
+static unsigned int
+picos_to_clk(unsigned int picos)
{
- int clks;
+ /* use unsigned long long to avoid rounding errors */
+ const unsigned long long ULL_2e12 = 2000000000000ULL;
+ unsigned long long clks;
+ unsigned long long clks_temp;
- clks = picos / (2000000000 / (get_bus_freq(0) / 1000));
- if (picos % (2000000000 / (get_bus_freq(0) / 1000)) != 0) {
+ if (! picos)
+ return 0;
+
+ clks = get_bus_freq(0) * (unsigned long long) picos;
+ clks_temp = clks;
+ clks = clks / ULL_2e12;
+ if (clks_temp % ULL_2e12) {
clks++;
}
- return clks;
+ if (clks > 0xFFFFFFFFULL) {
+ clks = 0xFFFFFFFFULL;
+ }
+
+ return (unsigned int) clks;
}
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index 7406fe2..67c56db 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -241,25 +241,39 @@
bl setup_ccsrbar
#endif
- /* Fix for SMP linux - Changing arbitration to round-robin */
- lis r3, CFG_CCSRBAR@h
- ori r3, r3, 0x1000
- xor r4, r4, r4
- li r4, 0x1000
- stw r4, 0(r3)
+ /* -- MPC8641 Rev 1.0 MCM Errata fixups -- */
+
+ /* skip fixups if not Rev 1.0 */
+ mfspr r4, SVR
+ rlwinm r4,r4,0,24,31
+ cmpwi r4,0x10
+ bne 1f
+
+ lis r3,MCM_ABCR@ha
+ lwz r4,MCM_ABCR@l(r3) /* ABCR -> r4 */
+
+ /* set ABCR[A_STRM_CNT] = 0 */
+ rlwinm r4,r4,0,0,29
+
+ /* set ABCR[ARB_POLICY] to 0x1 (round-robin) */
+ addi r0,r0,1
+ rlwimi r4,r0,12,18,19
+
+ stw r4,MCM_ABCR@l(r3) /* r4 -> ABCR */
+ sync
+
+ /* Set DBCR[ERD_DIS] */
+ lis r3,MCM_DBCR@ha
+ lwz r4,MCM_DBCR@l(r3)
+ oris r4, r4, 0x4000
+ stw r4,MCM_DBCR@l(r3)
+ sync
+1:
/* setup the law entries */
bl law_entry
sync
- /* Don't use this feature due to bug in 8641D PD4 */
- /* Disable ERD_DIS */
- lis r3, CFG_CCSRBAR@h
- ori r3, r3, 0x1008
- lwz r4, 0(r3)
- oris r4, r4, 0x4000
- stw r4, 0(r3)
- sync
#if (EMULATOR_RUN == 1)
/* On the emulator we want to adjust these ASAP */
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index b56629b..48b9ee2 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -465,7 +465,11 @@
* Set the SDRAM Clock Timing Register
*-----------------------------------------------------------------*/
mfsdram(SDRAM_CLKTR, val);
+#ifdef CFG_44x_DDR2_CKTR_180
+ mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_180_DEG_ADV);
+#else
mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_0_DEG);
+#endif
/*------------------------------------------------------------------
* Program the BxCF registers.
@@ -1117,14 +1121,15 @@
modt3 = 0x00000000;
}
if (total_rank == 4) {
- codt |= CALC_ODT_R(0) | CALC_ODT_R(1) | CALC_ODT_R(2) | CALC_ODT_R(3);
+ codt |= CALC_ODT_R(0) | CALC_ODT_R(1) |
+ CALC_ODT_R(2) | CALC_ODT_R(3);
modt0 = CALC_ODT_RW(2);
modt1 = 0x00000000;
modt2 = CALC_ODT_RW(0);
modt3 = 0x00000000;
}
}
- } else {
+ } else {
codt |= SDRAM_CODT_DQS_2_5_V_DDR1;
modt0 = 0x00000000;
modt1 = 0x00000000;
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index be4e824..1200d02 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -344,7 +344,7 @@
mfsdr(sdr_pfc1, pfc1);
pfc1 &= SDR0_PFC1_SELECT_MASK;
- switch (pfc1) {
+ switch (pfc1) {
case SDR0_PFC1_SELECT_CONFIG_2:
/* 1 x GMII port */
out32 (ZMII_FER, 0x00);
@@ -361,7 +361,7 @@
break;
case SDR0_PFC1_SELECT_CONFIG_6:
/* 2 x SMII ports */
- out32 (ZMII_FER,
+ out32 (ZMII_FER,
((ZMII_FER_SMII) << ZMII_FER_V(0)) |
((ZMII_FER_SMII) << ZMII_FER_V(1)));
out32 (RGMII_FER, 0x00000000);
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
index 09aac38..f63fc79 100644
--- a/cpu/ppc4xx/ndfc.c
+++ b/cpu/ppc4xx/ndfc.c
@@ -33,14 +33,15 @@
#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
(defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX))
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EZ))
#include <nand.h>
#include <linux/mtd/ndfc.h>
#include <linux/mtd/nand_ecc.h>
#include <asm/processor.h>
#include <asm/io.h>
-#include <ppc440.h>
+#include <ppc4xx.h>
static u8 hwctl = 0;
@@ -210,8 +211,7 @@
/*
* Setup EBC (CS0 only right now)
*/
- mtdcr(ebccfga, xbcfg);
- mtdcr(ebccfgd, 0xb8400000);
+ mtebc(EBC0_CFG, 0xb8400000);
mtebc(pb0cr, CFG_EBC_PB0CR);
mtebc(pb0ap, CFG_EBC_PB0AP);
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index fe14ecd..78de300 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -830,7 +830,7 @@
mtdcr ocmdscr2, r3 /* Set Data Side */
mtdcr ocmiscr2, r3 /* Set Instruction Side */
addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */
- mtdcr ocmdsisdpc,r4
+ mtdcr ocmdsisdpc,r3
isync
#else /* CONFIG_405EZ */
diff --git a/disk/part.c b/disk/part.c
index 9e8bd4f..acc1a74 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -179,6 +179,7 @@
#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \
(CONFIG_COMMANDS & CFG_CMD_SCSI) || \
(CONFIG_COMMANDS & CFG_CMD_USB) || \
+ defined(CONFIG_MMC) || \
defined(CONFIG_SYSTEMACE) )
#if defined(CONFIG_MAC_PARTITION) || \
diff --git a/doc/README.NetConsole b/doc/README.NetConsole
index cc35a0a..fea8e33 100644
--- a/doc/README.NetConsole
+++ b/doc/README.NetConsole
@@ -38,6 +38,11 @@
target IP address (or host name, assuming DNS is working). The script
can be interrupted by pressing ^T (CTRL-T).
+Be aware that in some distributives (Fedora Core 5 at least)
+usage of nc has been changed and -l and -p options are considered
+as mutually exclusive. If nc complains about options provided,
+you can just remove the -p option from the script.
+
It turns out that 'netcat' cannot be used to listen to broadcast
packets. We developed our own tool 'ncb' (see tools directory) that
listens to broadcast packets on a given port and dumps them to the
diff --git a/doc/README.mpc7448hpc2 b/doc/README.mpc7448hpc2
new file mode 100644
index 0000000..8659e83
--- /dev/null
+++ b/doc/README.mpc7448hpc2
@@ -0,0 +1,184 @@
+Freescale MPC7448hpc2 (Taiga) board
+===================================
+
+Created 08/11/2006 Roy Zang
+--------------------------
+MPC7448hpc2 (Taiga) board is a high-performance PowerPC server reference
+design, which is optimized for high speed throughput between the processor and
+the memory, disk drive and Ethernet port subsystems.
+
+MPC7448hpc2(Taiga) is designed to the micro-ATX chassis, allowing it to be
+used in 1U or 2U rack-mount chassis¡¯, as well as in standard ATX/Micro-ATX
+chassis.
+
+Building U-Boot
+------------------
+The mpc7448hpc2 code base is known to compile using:
+ Binutils 2.15, Gcc 3.4.3, Glibc 2.3.3
+
+ $ make mpc7448hpc2_config
+ Configuring for mpc7448hpc2 board...
+
+ $ make
+
+Memory Map
+----------
+
+The memory map is setup for Linux to operate properly.
+
+The mapping is:
+
+ Range Start Range End Definition Size
+
+ 0x0000_0000 0x7fff_ffff DDR 2G
+ 0xe000_0000 0xe7ff_ffff PCI Memory 128M
+ 0xfa00_0000 0xfaff_ffff PCI IO 16M
+ 0xfb00_0000 0xfbff_ffff PCI Config 16M
+ 0xfc00_0000 0xfc0f_ffff NVRAM/CADMUS 1M
+ 0xfe00_0000 0xfeff_ffff PromJet 16M
+ 0xff00_0000 0xff80_0000 FLASH (boot flash) 8M
+ 0xff80_0000 0xffff_ffff FLASH (second half flash) 8M
+
+Using Flash
+-----------
+
+The MPC7448hpc2 board has two "banks" of flash, each 8MB in size
+(2^23 = 0x00800000).
+
+Note: the "bank" here refers to half of the flash. In fact, there is only one
+bank of flash, which is divided into low and high half. Each is controlled by
+the most significant bit of the address bus. The so called "bank" is only for
+convenience.
+
+There is a switch which allows the "bank" to be selected. The switch
+settings for updating flash are given below.
+
+The u-boot commands for copying the boot-bank into the secondary bank are
+as follows:
+
+ erase ff800000 ff880000
+ cp.b ff000000 ff800000 80000
+
+U-boot commands for downloading an image via tftp and flashing
+it into the secondary bank:
+
+ tftp 10000 <u-boot.bin.image>
+ erase ff000000 ff080000
+ cp.b 10000 ff000000 80000
+
+After copying the image into the second bank of flash, be sure to toggle
+SW3[4] on board before resetting the board in order to set the
+secondary bank as the boot-bank.
+
+Board Switches
+----------------------
+
+Most switches on the board should not be changed. The most frequent
+user-settable switches on the board are used to configure
+the flash banks and determining the PCI frequency.
+
+SW1[1-5]: Processor core voltage
+
+ 12345 Core Voltage
+ -----
+ SW1=01111 1.000V.
+ SW1=01101 1.100V.
+ SW1=01011 1.200V.
+ SW1=01001 1.300V only for MPC7447A.
+
+
+SW2[1-6]: CPU core frequency
+
+ CPU Core Frequency (MHz)
+ Bus Frequency
+ 123456 100 133 167 200 Ratio
+
+ ------
+ SW2=101100 500 667 833 1000 5x
+ SW2=100100 550 733 917 1100 5.5x
+ SW2=110100 600 800 1000 1200 6x
+ SW2=010100 650 866 1083 1300 6.5x
+ SW2=001000 700 930 1167 1400 7x
+ SW2=000100 750 1000 1250 1500 7.5x
+ SW2=110000 800 1066 1333 1600 8x
+ SW2=011000 850 1333 1417 1700 8.5x only for MPC7447A
+ SW2=011110 900 1200 1500 1800 9x
+
+This table shows only a subset of available frequency options; see the CPU
+hardware specifications for more information.
+
+SW2[7-8]: Bus Protocol and CPU Reset Option
+
+ 7
+ -
+ SW2=0 System bus uses MPX bus protocol
+ SW2=1 System bus uses 60x bus protocol
+
+ 8
+ -
+ SW2=0 TSI108 can cause CPU reset
+ SW2=1 TSI108 can not cause CPU reset
+
+SW3[1-8] system options
+
+ 123
+ ---
+ SW3=xxx Connected to GPIO[0:2] on TSI108
+
+ 4
+ -
+ SW3=0 CPU boots from low half of flash
+ SW3=1 CPU boots from high half of flash
+
+ 5
+ -
+ SW3=0 SATA and slot2 connected to PCI bus
+ SW3=1 Only slot1 connected to PCI bus
+
+ 6
+ -
+ SW3=0 USB connected to PCI bus
+ SW3=1 USB disconnected from PCI bus
+
+ 7
+ -
+ SW3=0 Flash is write protected
+ SW3=1 Flash is NOT write protected
+
+ 8
+ -
+ SW3=0 CPU will boot from flash
+ SW3=1 CPU will boot from PromJet
+
+SW4[1-3]: System bus frequency
+
+ Bus Frequency (MHz)
+ ---
+ SW4=010 183
+ SW4=011 100
+ SW4=100 133
+ SW4=101 166 only for MPC7447A
+ SW4=110 200 only for MPC7448
+ others reserved
+
+SW4[4-6]: DDR2 SDRAM frequency
+
+ Bus Frequency (MHz)
+ ---
+ SW4=000 external clock
+ SW4=011 system clock
+ SW4=100 133
+ SW4=101 166
+ SW4=110 200
+ others reserved
+
+SW4[7-8]: PCI/PCI-X frequency control
+ 7
+ -
+ SW4=0 PCI/PCI-X bus operates normally
+ SW4=1 PCI bus forced to PCI-33 mode
+
+ 8
+ -
+ SW4=0 PCI-X mode at 133 MHz allowed
+ SW4=1 PCI-X mode limited to 100 MHz
diff --git a/doc/README.mpc8313erdb b/doc/README.mpc8313erdb
new file mode 100644
index 0000000..7ad4cc7
--- /dev/null
+++ b/doc/README.mpc8313erdb
@@ -0,0 +1,83 @@
+Freescale MPC8313ERDB Board
+-----------------------------------------
+
+1. Board Switches and Jumpers
+
+ SW3 is used to set CFG_RESET_SOURCE.
+
+ To boot the image at 0xFE000000 in NOR flash, use these DIP
+ switche settings for SW3 SW4:
+
+ +------+ +------+
+ | | | **** |
+ | **** | | |
+ +------+ ON +------+ ON
+ 4321 4321
+ (where the '*' indicates the position of the tab of the switch.)
+
+2. Memory Map
+ The memory map looks like this:
+
+ 0x0000_0000 0x07ff_ffff DDR 128M
+ 0x8000_0000 0x8fff_ffff PCI MEM 256M
+ 0x9000_0000 0x9fff_ffff PCI_MMIO 256M
+ 0xe000_0000 0xe00f_ffff IMMR 1M
+ 0xe200_0000 0xe20f_ffff PCI IO 16M
+ 0xe280_0000 0xe280_7fff NAND FLASH (CS1) 32K
+ 0xf000_0000 0xf001_ffff VSC7385 (CS2) 128K
+ 0xfa00_0000 0xfa00_7fff Board Status/ 32K
+ LED Control (CS3)
+ 0xfe00_0000 0xfe7f_ffff NOR FLASH (CS0) 8M
+
+3. Definitions
+
+3.1 Explanation of NEW definitions in:
+
+ include/configs/MPC8313ERDB.h
+
+ CONFIG_MPC83xx MPC83xx family
+ CONFIG_MPC831x MPC831x specific
+ CONFIG_MPC8313ERDB MPC8313ERDB board specific
+
+4. Compilation
+
+ Assuming you're using BASH (or similar) as your shell:
+
+ export CROSS_COMPILE=your-cross-compiler-prefix-
+ make distclean
+ make MPC8313ERDB_33_config
+ (or make MPC8313ERDB_66_config, depending on the speed of
+ the oscillator on your board)
+ make
+
+5. Downloading and Flashing Images
+
+5.1 Reflash U-boot Image using U-boot
+
+ =>run tftpflash
+
+ You may want to try
+ =>tftpboot $loadaddr $uboot
+ first, to make sure that the TFTP load will succeed before it
+ goes ahead and wipes out your current firmware. And of course,
+ have an alternate means of programming the flash available
+ if the new u-boot doesn't boot.
+
+5.2 Downloading and Booting Linux Kernel
+
+ Ensure that all networking-related environment variables are set
+ properly (including ipaddr, serverip, gatewayip (if needed),
+ netmask, ethaddr, eth1addr, rootpath (if using NFS root),
+ fdtfile, and bootfile).
+
+ Then, do one of the following, depending on whether you
+ want an NFS root or a ramdisk root:
+
+ =>run nfsboot
+ or
+ =>run ramboot
+
+6 Notes
+
+ Booting from NAND flash is not yet supported.
+ The console baudrate for MPC8313ERDB is 115200bps.
diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn
index 4a650ce..3b88f8b 100644
--- a/doc/README.mpc8641hpcn
+++ b/doc/README.mpc8641hpcn
@@ -121,3 +121,37 @@
0xe300_0000 0xe3ff_ffff PCI2/PEX2 IO 16M
0xfe00_0000 0xfeff_ffff Flash(alternate)16M
0xff00_0000 0xffff_ffff Flash(boot bank)16M
+
+5. pixis_reset command
+--------------------
+A new command, "pixis_reset", is introduced to reset mpc8641hpcn board
+using the FPGA sequencer. When the board restarts, it has the option
+of using either the current or alternate flash bank as the boot
+image, with or without the watchdog timer enabled, and finally with
+or without frequency changes.
+
+Usage is;
+
+ pixis_reset
+ pixis_reset altbank
+ pixis_reset altbank wd
+ pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
+ pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
+
+Examples;
+
+ /* reset to current bank, like "reset" command */
+ pixis_reset
+
+ /* reset board but use the to alternate flash bank */
+ pixis_reset altbank
+
+ /* reset board, use alternate flash bank with watchdog timer enabled*/
+ pixis_reset altbank wd
+
+ /* reset board to alternate bank with frequency changed.
+ * 40 is SYSCLK, 2.5 is COREPLL ratio, 10 is MPXPLL ratio
+ */
+ pixis-reset altbank cf 40 2.5 10
+
+Valid clock choices are in the 8641 Reference Manuals.
diff --git a/doc/README.nand b/doc/README.nand
index b5171f4..5c31845 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -192,12 +192,7 @@
to only board-specific files and - unfortunately - to the DoC code
(see below). A new configuration variable has been introduced:
CFG_NAND_LEGACY, which has to be defined in the board config file if
-that board uses legacy code. If CFG_NAND_LEGACY is defined, the board
-specific config.mk file should also have "BOARDLIBS =
-drivers/nand_legacy/libnand_legacy.a". For boards using the new NAND
-approach (PPChameleon and netstar at the moment) no variable is
-necessary, but the config.mk should have "BOARDLIBS =
-drivers/nand/libnand.a".
+that board uses legacy code.
The necessary changes have been made to all affected boards, and no
build breakage has been introduced, except for NETTA and NETTA_ISDN
diff --git a/doc/README.sbc8560 b/doc/README.sbc8560
deleted file mode 100644
index 52592e3..0000000
--- a/doc/README.sbc8560
+++ /dev/null
@@ -1,53 +0,0 @@
-The port was tested on Wind River System Sbc8560 board <www.windriver.com>.
-U-Boot was installed on the flash memory of the CPU card (no the SODIMM).
-
-NOTE: Please configure uboot compile to the proper PCI frequency and
-setup the appropriate DIP switch settings.
-
-SBC8560 board:
-
-Make sure boards switches are set to their appropriate conditions.
-Refer to the Engineering Reference Guide ERG-00300-002. Of particular
-importance are: 1)Tthe settings for JP4 (JP4 1-3 and 2-4), which
-select the on-board FLASH device (Intel 28F128Jx); 2) The settings
-for the Clock SW9 (33 MHz or 66 MHz).
-
- Note: SW9 Settings: 66 MHz
- 4:1 ratio CCB clocks:SYSCLK
- 3:1 ration e500 Core:CCB
- pos1 - on, pos2 - on, pos3 - off, pos4 - on, pos5 - off, pos6 - on
- Note: SW9 Settings: 33 MHz
- 8:1 ratio CCB clocks:SYSCLK
- 3:1 ration e500 Core:CCB
- pos1 - on, pos2 - on, pos3 - on, pos4 - off, pos5 - off, pos6 - on
-
-
-Flashing the FLASH device with the "Wind River ICE":
-
-1) Properly connect and configure the Wind River ICE to the
- target JTAG port. This includes running the SBC8560 register script.
- Make sure target memory can be read and written.
-
-2) Build the u-boot image:
- make distclean
- make SBC8560_66_config or SBC8560_33_config
- make CROSS_COMPILE=.../ELDK3.0/ppc_8xx-/ all
-
- Note: reference is made to the ELDK3.0 compiler but any 85xx cross-compiler
- should suffice.
-
-3) Convert the uboot (.elf) file to a uboot.bin file (using visionClick converter).
- The bin file should be converted from fffc0000 to ffffffff
-
-4) Setup the Flash Utility (tools menu) for:
-
- Determine the clock speed of the PCI bus and set SW9 accordingly
- Note: the speed of the PCI bus defaults to the slowest PCI card
- PlayBack the "default" register file for the SBC8560
- Select the uboot.bin file with zero bias
- Select the initialize Target prior to programming
- Select the V28F640Jx (8192 x 8) 1 device FLASH Algorithm
- Select the erase base address from FFFC0000 to FFFFFFFF
- Select the start address from 0 with size of 4000
-
-5) Erase and Program
diff --git a/drivers/Makefile b/drivers/Makefile
index fffc22a..d68cba6 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -32,7 +32,7 @@
cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
e1000.o eepro100.o \
i8042.o inca-ip_sw.o keyboard.o \
- lan91c96.o \
+ lan91c96.o macb.o \
natsemi.o ne2000.o netarm_eth.o netconsole.o \
ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \
omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o \
@@ -46,6 +46,7 @@
sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
status_led.o sym53c8xx.o systemace.o ahci.o \
ti_pci1410a.o tigon3.o tsec.o \
+ tsi108_eth.o tsi108_i2c.o tsi108_pci.o \
usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
videomodes.o w83c553f.o \
ks8695eth.o \
diff --git a/drivers/atmel_usart.c b/drivers/atmel_usart.c
index 41c3768..f35b997 100644
--- a/drivers/atmel_usart.c
+++ b/drivers/atmel_usart.c
@@ -19,7 +19,22 @@
#ifdef CONFIG_ATMEL_USART
#include <asm/io.h>
-#include <asm/arch/platform.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
+
+#if defined(CONFIG_USART0)
+# define USART_ID 0
+# define USART_BASE USART0_BASE
+#elif defined(CONFIG_USART1)
+# define USART_ID 1
+# define USART_BASE USART1_BASE
+#elif defined(CONFIG_USART2)
+# define USART_ID 2
+# define USART_BASE USART2_BASE
+#elif defined(CONFIG_USART3)
+# define USART_ID 3
+# define USART_BASE USART3_BASE
+#endif
#include "atmel_usart.h"
@@ -35,26 +50,23 @@
* Baud Rate = --------------
* 16 * CD
*/
- usart_hz = pm_get_clock_freq(gd->console_uart->resource[0].u.clock.id);
+ usart_hz = get_usart_clk_rate(USART_ID);
divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate;
- usart3_writel(gd->console_uart, BRGR, USART3_BF(CD, divisor));
+ usart3_writel(BRGR, USART3_BF(CD, divisor));
}
int serial_init(void)
{
- usart3_writel(gd->console_uart, CR,
- USART3_BIT(RSTRX) | USART3_BIT(RSTTX));
+ usart3_writel(CR, USART3_BIT(RSTRX) | USART3_BIT(RSTTX));
serial_setbrg();
- usart3_writel(gd->console_uart, CR,
- USART3_BIT(RXEN) | USART3_BIT(TXEN));
- usart3_writel(gd->console_uart, MR,
- USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
- | USART3_BF(USCLKS, USART3_USCLKS_MCK)
- | USART3_BF(CHRL, USART3_CHRL_8)
- | USART3_BF(PAR, USART3_PAR_NONE)
- | USART3_BF(NBSTOP, USART3_NBSTOP_1));
+ usart3_writel(CR, USART3_BIT(RXEN) | USART3_BIT(TXEN));
+ usart3_writel(MR, (USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
+ | USART3_BF(USCLKS, USART3_USCLKS_MCK)
+ | USART3_BF(CHRL, USART3_CHRL_8)
+ | USART3_BF(PAR, USART3_PAR_NONE)
+ | USART3_BF(NBSTOP, USART3_NBSTOP_1)));
return 0;
}
@@ -64,8 +76,8 @@
if (c == '\n')
serial_putc('\r');
- while (!(usart3_readl(gd->console_uart, CSR) & USART3_BIT(TXRDY))) ;
- usart3_writel(gd->console_uart, THR, c);
+ while (!(usart3_readl(CSR) & USART3_BIT(TXRDY))) ;
+ usart3_writel(THR, c);
}
void serial_puts(const char *s)
@@ -76,13 +88,13 @@
int serial_getc(void)
{
- while (!(usart3_readl(gd->console_uart, CSR) & USART3_BIT(RXRDY))) ;
- return usart3_readl(gd->console_uart, RHR);
+ while (!(usart3_readl(CSR) & USART3_BIT(RXRDY))) ;
+ return usart3_readl(RHR);
}
int serial_tstc(void)
{
- return (usart3_readl(gd->console_uart, CSR) & USART3_BIT(RXRDY)) != 0;
+ return (usart3_readl(CSR) & USART3_BIT(RXRDY)) != 0;
}
#endif /* CONFIG_ATMEL_USART */
diff --git a/drivers/atmel_usart.h b/drivers/atmel_usart.h
index fad90a8..af3773a 100644
--- a/drivers/atmel_usart.h
+++ b/drivers/atmel_usart.h
@@ -306,9 +306,9 @@
| USART3_BF(name,value))
/* Register access macros */
-#define usart3_readl(port,reg) \
- readl((port)->regs + USART3_##reg)
-#define usart3_writel(port,reg,value) \
- writel((value), (port)->regs + USART3_##reg)
+#define usart3_readl(reg) \
+ readl((void *)USART_BASE + USART3_##reg)
+#define usart3_writel(reg,value) \
+ writel((value), (void *)USART_BASE + USART3_##reg)
#endif /* __DRIVERS_ATMEL_USART_H__ */
diff --git a/drivers/macb.c b/drivers/macb.c
new file mode 100644
index 0000000..186ab19
--- /dev/null
+++ b/drivers/macb.c
@@ -0,0 +1,575 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <common.h>
+
+#if defined(CONFIG_MACB) && (CONFIG_COMMANDS & (CFG_CMD_NET | CFG_CMD_MII))
+
+/*
+ * The u-boot networking stack is a little weird. It seems like the
+ * networking core allocates receive buffers up front without any
+ * regard to the hardware that's supposed to actually receive those
+ * packets.
+ *
+ * The MACB receives packets into 128-byte receive buffers, so the
+ * buffers allocated by the core isn't very practical to use. We'll
+ * allocate our own, but we need one such buffer in case a packet
+ * wraps around the DMA ring so that we have to copy it.
+ *
+ * Therefore, define CFG_RX_ETH_BUFFER to 1 in the board-specific
+ * configuration header. This way, the core allocates one RX buffer
+ * and one TX buffer, each of which can hold a ethernet packet of
+ * maximum size.
+ *
+ * For some reason, the networking core unconditionally specifies a
+ * 32-byte packet "alignment" (which really should be called
+ * "padding"). MACB shouldn't need that, but we'll refrain from any
+ * core modifications here...
+ */
+
+#include <net.h>
+#include <malloc.h>
+
+#include <linux/mii.h>
+#include <asm/io.h>
+#include <asm/dma-mapping.h>
+#include <asm/arch/clk.h>
+
+#include "macb.h"
+
+#define CFG_MACB_RX_BUFFER_SIZE 4096
+#define CFG_MACB_RX_RING_SIZE (CFG_MACB_RX_BUFFER_SIZE / 128)
+#define CFG_MACB_TX_RING_SIZE 16
+#define CFG_MACB_TX_TIMEOUT 1000
+#define CFG_MACB_AUTONEG_TIMEOUT 5000000
+
+struct macb_dma_desc {
+ u32 addr;
+ u32 ctrl;
+};
+
+#define RXADDR_USED 0x00000001
+#define RXADDR_WRAP 0x00000002
+
+#define RXBUF_FRMLEN_MASK 0x00000fff
+#define RXBUF_FRAME_START 0x00004000
+#define RXBUF_FRAME_END 0x00008000
+#define RXBUF_TYPEID_MATCH 0x00400000
+#define RXBUF_ADDR4_MATCH 0x00800000
+#define RXBUF_ADDR3_MATCH 0x01000000
+#define RXBUF_ADDR2_MATCH 0x02000000
+#define RXBUF_ADDR1_MATCH 0x04000000
+#define RXBUF_BROADCAST 0x80000000
+
+#define TXBUF_FRMLEN_MASK 0x000007ff
+#define TXBUF_FRAME_END 0x00008000
+#define TXBUF_NOCRC 0x00010000
+#define TXBUF_EXHAUSTED 0x08000000
+#define TXBUF_UNDERRUN 0x10000000
+#define TXBUF_MAXRETRY 0x20000000
+#define TXBUF_WRAP 0x40000000
+#define TXBUF_USED 0x80000000
+
+struct macb_device {
+ void *regs;
+
+ unsigned int rx_tail;
+ unsigned int tx_head;
+ unsigned int tx_tail;
+
+ void *rx_buffer;
+ void *tx_buffer;
+ struct macb_dma_desc *rx_ring;
+ struct macb_dma_desc *tx_ring;
+
+ unsigned long rx_buffer_dma;
+ unsigned long rx_ring_dma;
+ unsigned long tx_ring_dma;
+
+ const struct device *dev;
+ struct eth_device netdev;
+ unsigned short phy_addr;
+};
+#define to_macb(_nd) container_of(_nd, struct macb_device, netdev)
+
+static void macb_mdio_write(struct macb_device *macb, u8 reg, u16 value)
+{
+ unsigned long netctl;
+ unsigned long netstat;
+ unsigned long frame;
+
+ netctl = macb_readl(macb, NCR);
+ netctl |= MACB_BIT(MPE);
+ macb_writel(macb, NCR, netctl);
+
+ frame = (MACB_BF(SOF, 1)
+ | MACB_BF(RW, 1)
+ | MACB_BF(PHYA, macb->phy_addr)
+ | MACB_BF(REGA, reg)
+ | MACB_BF(CODE, 2)
+ | MACB_BF(DATA, value));
+ macb_writel(macb, MAN, frame);
+
+ do {
+ netstat = macb_readl(macb, NSR);
+ } while (!(netstat & MACB_BIT(IDLE)));
+
+ netctl = macb_readl(macb, NCR);
+ netctl &= ~MACB_BIT(MPE);
+ macb_writel(macb, NCR, netctl);
+}
+
+static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
+{
+ unsigned long netctl;
+ unsigned long netstat;
+ unsigned long frame;
+
+ netctl = macb_readl(macb, NCR);
+ netctl |= MACB_BIT(MPE);
+ macb_writel(macb, NCR, netctl);
+
+ frame = (MACB_BF(SOF, 1)
+ | MACB_BF(RW, 2)
+ | MACB_BF(PHYA, macb->phy_addr)
+ | MACB_BF(REGA, reg)
+ | MACB_BF(CODE, 2));
+ macb_writel(macb, MAN, frame);
+
+ do {
+ netstat = macb_readl(macb, NSR);
+ } while (!(netstat & MACB_BIT(IDLE)));
+
+ frame = macb_readl(macb, MAN);
+
+ netctl = macb_readl(macb, NCR);
+ netctl &= ~MACB_BIT(MPE);
+ macb_writel(macb, NCR, netctl);
+
+ return MACB_BFEXT(DATA, frame);
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+
+static int macb_send(struct eth_device *netdev, volatile void *packet,
+ int length)
+{
+ struct macb_device *macb = to_macb(netdev);
+ unsigned long paddr, ctrl;
+ unsigned int tx_head = macb->tx_head;
+ int i;
+
+ paddr = dma_map_single(packet, length, DMA_TO_DEVICE);
+
+ ctrl = length & TXBUF_FRMLEN_MASK;
+ ctrl |= TXBUF_FRAME_END;
+ if (tx_head == (CFG_MACB_TX_RING_SIZE - 1)) {
+ ctrl |= TXBUF_WRAP;
+ macb->tx_head = 0;
+ } else
+ macb->tx_head++;
+
+ macb->tx_ring[tx_head].ctrl = ctrl;
+ macb->tx_ring[tx_head].addr = paddr;
+ macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART));
+
+ /*
+ * I guess this is necessary because the networking core may
+ * re-use the transmit buffer as soon as we return...
+ */
+ i = 0;
+ while (!(macb->tx_ring[tx_head].ctrl & TXBUF_USED)) {
+ if (i > CFG_MACB_TX_TIMEOUT) {
+ printf("%s: TX timeout\n", netdev->name);
+ break;
+ }
+ udelay(1);
+ i++;
+ }
+
+ dma_unmap_single(packet, length, paddr);
+
+ if (i <= CFG_MACB_TX_TIMEOUT) {
+ ctrl = macb->tx_ring[tx_head].ctrl;
+ if (ctrl & TXBUF_UNDERRUN)
+ printf("%s: TX underrun\n", netdev->name);
+ if (ctrl & TXBUF_EXHAUSTED)
+ printf("%s: TX buffers exhausted in mid frame\n",
+ netdev->name);
+ }
+
+ /* No one cares anyway */
+ return 0;
+}
+
+static void reclaim_rx_buffers(struct macb_device *macb,
+ unsigned int new_tail)
+{
+ unsigned int i;
+
+ i = macb->rx_tail;
+ while (i > new_tail) {
+ macb->rx_ring[i].addr &= ~RXADDR_USED;
+ i++;
+ if (i > CFG_MACB_RX_RING_SIZE)
+ i = 0;
+ }
+
+ while (i < new_tail) {
+ macb->rx_ring[i].addr &= ~RXADDR_USED;
+ i++;
+ }
+
+ macb->rx_tail = new_tail;
+}
+
+static int macb_recv(struct eth_device *netdev)
+{
+ struct macb_device *macb = to_macb(netdev);
+ unsigned int rx_tail = macb->rx_tail;
+ void *buffer;
+ int length;
+ int wrapped = 0;
+ u32 status;
+
+ for (;;) {
+ if (!(macb->rx_ring[rx_tail].addr & RXADDR_USED))
+ return -1;
+
+ status = macb->rx_ring[rx_tail].ctrl;
+ if (status & RXBUF_FRAME_START) {
+ if (rx_tail != macb->rx_tail)
+ reclaim_rx_buffers(macb, rx_tail);
+ wrapped = 0;
+ }
+
+ if (status & RXBUF_FRAME_END) {
+ buffer = macb->rx_buffer + 128 * macb->rx_tail;
+ length = status & RXBUF_FRMLEN_MASK;
+ if (wrapped) {
+ unsigned int headlen, taillen;
+
+ headlen = 128 * (CFG_MACB_RX_RING_SIZE
+ - macb->rx_tail);
+ taillen = length - headlen;
+ memcpy((void *)NetRxPackets[0],
+ buffer, headlen);
+ memcpy((void *)NetRxPackets[0] + headlen,
+ macb->rx_buffer, taillen);
+ buffer = (void *)NetRxPackets[0];
+ }
+
+ NetReceive(buffer, length);
+ if (++rx_tail >= CFG_MACB_RX_RING_SIZE)
+ rx_tail = 0;
+ reclaim_rx_buffers(macb, rx_tail);
+ } else {
+ if (++rx_tail >= CFG_MACB_RX_RING_SIZE) {
+ wrapped = 1;
+ rx_tail = 0;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int macb_phy_init(struct macb_device *macb)
+{
+ struct eth_device *netdev = &macb->netdev;
+ u32 ncfgr;
+ u16 phy_id, status, adv, lpa;
+ int media, speed, duplex;
+ int i;
+
+ /* Check if the PHY is up to snuff... */
+ phy_id = macb_mdio_read(macb, MII_PHYSID1);
+ if (phy_id == 0xffff) {
+ printf("%s: No PHY present\n", netdev->name);
+ return 0;
+ }
+
+ adv = ADVERTISE_CSMA | ADVERTISE_ALL;
+ macb_mdio_write(macb, MII_ADVERTISE, adv);
+ printf("%s: Starting autonegotiation...\n", netdev->name);
+ macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE
+ | BMCR_ANRESTART));
+
+#if 0
+ for (i = 0; i < 9; i++)
+ printf("mii%d: 0x%04x\n", i, macb_mdio_read(macb, i));
+#endif
+
+ for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) {
+ status = macb_mdio_read(macb, MII_BMSR);
+ if (status & BMSR_ANEGCOMPLETE)
+ break;
+ udelay(100);
+ }
+
+ if (status & BMSR_ANEGCOMPLETE)
+ printf("%s: Autonegotiation complete\n", netdev->name);
+ else
+ printf("%s: Autonegotiation timed out (status=0x%04x)\n",
+ netdev->name, status);
+
+ if (!(status & BMSR_LSTATUS)) {
+ for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) {
+ udelay(100);
+ status = macb_mdio_read(macb, MII_BMSR);
+ if (status & BMSR_LSTATUS)
+ break;
+ }
+ }
+
+ if (!(status & BMSR_LSTATUS)) {
+ printf("%s: link down (status: 0x%04x)\n",
+ netdev->name, status);
+ return 0;
+ } else {
+ lpa = macb_mdio_read(macb, MII_LPA);
+ media = mii_nway_result(lpa & adv);
+ speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
+ ? 1 : 0);
+ duplex = (media & ADVERTISE_FULL) ? 1 : 0;
+ printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
+ netdev->name,
+ speed ? "100" : "10",
+ duplex ? "full" : "half",
+ lpa);
+
+ ncfgr = macb_readl(macb, NCFGR);
+ ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
+ if (speed)
+ ncfgr |= MACB_BIT(SPD);
+ if (duplex)
+ ncfgr |= MACB_BIT(FD);
+ macb_writel(macb, NCFGR, ncfgr);
+ return 1;
+ }
+}
+
+static int macb_init(struct eth_device *netdev, bd_t *bd)
+{
+ struct macb_device *macb = to_macb(netdev);
+ unsigned long paddr;
+ u32 hwaddr_bottom;
+ u16 hwaddr_top;
+ int i;
+
+ /*
+ * macb_halt should have been called at some point before now,
+ * so we'll assume the controller is idle.
+ */
+
+ /* initialize DMA descriptors */
+ paddr = macb->rx_buffer_dma;
+ for (i = 0; i < CFG_MACB_RX_RING_SIZE; i++) {
+ if (i == (CFG_MACB_RX_RING_SIZE - 1))
+ paddr |= RXADDR_WRAP;
+ macb->rx_ring[i].addr = paddr;
+ macb->rx_ring[i].ctrl = 0;
+ paddr += 128;
+ }
+ for (i = 0; i < CFG_MACB_TX_RING_SIZE; i++) {
+ macb->tx_ring[i].addr = 0;
+ if (i == (CFG_MACB_TX_RING_SIZE - 1))
+ macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
+ else
+ macb->tx_ring[i].ctrl = TXBUF_USED;
+ }
+ macb->rx_tail = macb->tx_head = macb->tx_tail = 0;
+
+ macb_writel(macb, RBQP, macb->rx_ring_dma);
+ macb_writel(macb, TBQP, macb->tx_ring_dma);
+
+ /* set hardware address */
+ hwaddr_bottom = cpu_to_le32(*((u32 *)netdev->enetaddr));
+ macb_writel(macb, SA1B, hwaddr_bottom);
+ hwaddr_top = cpu_to_le16(*((u16 *)(netdev->enetaddr + 4)));
+ macb_writel(macb, SA1T, hwaddr_top);
+
+ /* choose RMII or MII mode. This depends on the board */
+#ifdef CONFIG_RMII
+ macb_writel(macb, USRIO, 0);
+#else
+ macb_writel(macb, USRIO, MACB_BIT(MII));
+#endif
+
+ if (!macb_phy_init(macb))
+ return 0;
+
+ /* Enable TX and RX */
+ macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE));
+
+ return 1;
+}
+
+static void macb_halt(struct eth_device *netdev)
+{
+ struct macb_device *macb = to_macb(netdev);
+ u32 ncr, tsr;
+
+ /* Halt the controller and wait for any ongoing transmission to end. */
+ ncr = macb_readl(macb, NCR);
+ ncr |= MACB_BIT(THALT);
+ macb_writel(macb, NCR, ncr);
+
+ do {
+ tsr = macb_readl(macb, TSR);
+ } while (tsr & MACB_BIT(TGO));
+
+ /* Disable TX and RX, and clear statistics */
+ macb_writel(macb, NCR, MACB_BIT(CLRSTAT));
+}
+
+int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
+{
+ struct macb_device *macb;
+ struct eth_device *netdev;
+ unsigned long macb_hz;
+ u32 ncfgr;
+
+ macb = malloc(sizeof(struct macb_device));
+ if (!macb) {
+ printf("Error: Failed to allocate memory for MACB%d\n", id);
+ return -1;
+ }
+ memset(macb, 0, sizeof(struct macb_device));
+
+ netdev = &macb->netdev;
+
+ macb->rx_buffer = dma_alloc_coherent(CFG_MACB_RX_BUFFER_SIZE,
+ &macb->rx_buffer_dma);
+ macb->rx_ring = dma_alloc_coherent(CFG_MACB_RX_RING_SIZE
+ * sizeof(struct macb_dma_desc),
+ &macb->rx_ring_dma);
+ macb->tx_ring = dma_alloc_coherent(CFG_MACB_TX_RING_SIZE
+ * sizeof(struct macb_dma_desc),
+ &macb->tx_ring_dma);
+
+ macb->regs = regs;
+ macb->phy_addr = phy_addr;
+
+ sprintf(netdev->name, "macb%d", id);
+ netdev->init = macb_init;
+ netdev->halt = macb_halt;
+ netdev->send = macb_send;
+ netdev->recv = macb_recv;
+
+ /*
+ * Do some basic initialization so that we at least can talk
+ * to the PHY
+ */
+ macb_hz = get_macb_pclk_rate(id);
+ if (macb_hz < 20000000)
+ ncfgr = MACB_BF(CLK, MACB_CLK_DIV8);
+ else if (macb_hz < 40000000)
+ ncfgr = MACB_BF(CLK, MACB_CLK_DIV16);
+ else if (macb_hz < 80000000)
+ ncfgr = MACB_BF(CLK, MACB_CLK_DIV32);
+ else
+ ncfgr = MACB_BF(CLK, MACB_CLK_DIV64);
+
+ macb_writel(macb, NCFGR, ncfgr);
+
+ eth_register(netdev);
+
+ return 0;
+}
+
+#endif /* (CONFIG_COMMANDS & CFG_CMD_NET) */
+
+#if (CONFIG_COMMANDS & CFG_CMD_MII)
+
+int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
+{
+ unsigned long netctl;
+ unsigned long netstat;
+ unsigned long frame;
+ int iflag;
+
+ iflag = disable_interrupts();
+ netctl = macb_readl(&macb, EMACB_NCR);
+ netctl |= MACB_BIT(MPE);
+ macb_writel(&macb, EMACB_NCR, netctl);
+ if (iflag)
+ enable_interrupts();
+
+ frame = (MACB_BF(SOF, 1)
+ | MACB_BF(RW, 2)
+ | MACB_BF(PHYA, addr)
+ | MACB_BF(REGA, reg)
+ | MACB_BF(CODE, 2));
+ macb_writel(&macb, EMACB_MAN, frame);
+
+ do {
+ netstat = macb_readl(&macb, EMACB_NSR);
+ } while (!(netstat & MACB_BIT(IDLE)));
+
+ frame = macb_readl(&macb, EMACB_MAN);
+ *value = MACB_BFEXT(DATA, frame);
+
+ iflag = disable_interrupts();
+ netctl = macb_readl(&macb, EMACB_NCR);
+ netctl &= ~MACB_BIT(MPE);
+ macb_writel(&macb, EMACB_NCR, netctl);
+ if (iflag)
+ enable_interrupts();
+
+ return 0;
+}
+
+int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
+{
+ unsigned long netctl;
+ unsigned long netstat;
+ unsigned long frame;
+ int iflag;
+
+ iflag = disable_interrupts();
+ netctl = macb_readl(&macb, EMACB_NCR);
+ netctl |= MACB_BIT(MPE);
+ macb_writel(&macb, EMACB_NCR, netctl);
+ if (iflag)
+ enable_interrupts();
+
+ frame = (MACB_BF(SOF, 1)
+ | MACB_BF(RW, 1)
+ | MACB_BF(PHYA, addr)
+ | MACB_BF(REGA, reg)
+ | MACB_BF(CODE, 2)
+ | MACB_BF(DATA, value));
+ macb_writel(&macb, EMACB_MAN, frame);
+
+ do {
+ netstat = macb_readl(&macb, EMACB_NSR);
+ } while (!(netstat & MACB_BIT(IDLE)));
+
+ iflag = disable_interrupts();
+ netctl = macb_readl(&macb, EMACB_NCR);
+ netctl &= ~MACB_BIT(MPE);
+ macb_writel(&macb, EMACB_NCR, netctl);
+ if (iflag)
+ enable_interrupts();
+
+ return 0;
+}
+
+#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */
+
+#endif /* CONFIG_MACB */
diff --git a/drivers/macb.h b/drivers/macb.h
new file mode 100644
index 0000000..c778e4e
--- /dev/null
+++ b/drivers/macb.h
@@ -0,0 +1,269 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __DRIVERS_MACB_H__
+#define __DRIVERS_MACB_H__
+
+/* MACB register offsets */
+#define MACB_NCR 0x0000
+#define MACB_NCFGR 0x0004
+#define MACB_NSR 0x0008
+#define MACB_TSR 0x0014
+#define MACB_RBQP 0x0018
+#define MACB_TBQP 0x001c
+#define MACB_RSR 0x0020
+#define MACB_ISR 0x0024
+#define MACB_IER 0x0028
+#define MACB_IDR 0x002c
+#define MACB_IMR 0x0030
+#define MACB_MAN 0x0034
+#define MACB_PTR 0x0038
+#define MACB_PFR 0x003c
+#define MACB_FTO 0x0040
+#define MACB_SCF 0x0044
+#define MACB_MCF 0x0048
+#define MACB_FRO 0x004c
+#define MACB_FCSE 0x0050
+#define MACB_ALE 0x0054
+#define MACB_DTF 0x0058
+#define MACB_LCOL 0x005c
+#define MACB_EXCOL 0x0060
+#define MACB_TUND 0x0064
+#define MACB_CSE 0x0068
+#define MACB_RRE 0x006c
+#define MACB_ROVR 0x0070
+#define MACB_RSE 0x0074
+#define MACB_ELE 0x0078
+#define MACB_RJA 0x007c
+#define MACB_USF 0x0080
+#define MACB_STE 0x0084
+#define MACB_RLE 0x0088
+#define MACB_TPF 0x008c
+#define MACB_HRB 0x0090
+#define MACB_HRT 0x0094
+#define MACB_SA1B 0x0098
+#define MACB_SA1T 0x009c
+#define MACB_SA2B 0x00a0
+#define MACB_SA2T 0x00a4
+#define MACB_SA3B 0x00a8
+#define MACB_SA3T 0x00ac
+#define MACB_SA4B 0x00b0
+#define MACB_SA4T 0x00b4
+#define MACB_TID 0x00b8
+#define MACB_TPQ 0x00bc
+#define MACB_USRIO 0x00c0
+#define MACB_WOL 0x00c4
+
+/* Bitfields in NCR */
+#define MACB_LB_OFFSET 0
+#define MACB_LB_SIZE 1
+#define MACB_LLB_OFFSET 1
+#define MACB_LLB_SIZE 1
+#define MACB_RE_OFFSET 2
+#define MACB_RE_SIZE 1
+#define MACB_TE_OFFSET 3
+#define MACB_TE_SIZE 1
+#define MACB_MPE_OFFSET 4
+#define MACB_MPE_SIZE 1
+#define MACB_CLRSTAT_OFFSET 5
+#define MACB_CLRSTAT_SIZE 1
+#define MACB_INCSTAT_OFFSET 6
+#define MACB_INCSTAT_SIZE 1
+#define MACB_WESTAT_OFFSET 7
+#define MACB_WESTAT_SIZE 1
+#define MACB_BP_OFFSET 8
+#define MACB_BP_SIZE 1
+#define MACB_TSTART_OFFSET 9
+#define MACB_TSTART_SIZE 1
+#define MACB_THALT_OFFSET 10
+#define MACB_THALT_SIZE 1
+#define MACB_NCR_TPF_OFFSET 11
+#define MACB_NCR_TPF_SIZE 1
+#define MACB_TZQ_OFFSET 12
+#define MACB_TZQ_SIZE 1
+
+/* Bitfields in NCFGR */
+#define MACB_SPD_OFFSET 0
+#define MACB_SPD_SIZE 1
+#define MACB_FD_OFFSET 1
+#define MACB_FD_SIZE 1
+#define MACB_BIT_RATE_OFFSET 2
+#define MACB_BIT_RATE_SIZE 1
+#define MACB_JFRAME_OFFSET 3
+#define MACB_JFRAME_SIZE 1
+#define MACB_CAF_OFFSET 4
+#define MACB_CAF_SIZE 1
+#define MACB_NBC_OFFSET 5
+#define MACB_NBC_SIZE 1
+#define MACB_NCFGR_MTI_OFFSET 6
+#define MACB_NCFGR_MTI_SIZE 1
+#define MACB_UNI_OFFSET 7
+#define MACB_UNI_SIZE 1
+#define MACB_BIG_OFFSET 8
+#define MACB_BIG_SIZE 1
+#define MACB_EAE_OFFSET 9
+#define MACB_EAE_SIZE 1
+#define MACB_CLK_OFFSET 10
+#define MACB_CLK_SIZE 2
+#define MACB_RTY_OFFSET 12
+#define MACB_RTY_SIZE 1
+#define MACB_PAE_OFFSET 13
+#define MACB_PAE_SIZE 1
+#define MACB_RBOF_OFFSET 14
+#define MACB_RBOF_SIZE 2
+#define MACB_RLCE_OFFSET 16
+#define MACB_RLCE_SIZE 1
+#define MACB_DRFCS_OFFSET 17
+#define MACB_DRFCS_SIZE 1
+#define MACB_EFRHD_OFFSET 18
+#define MACB_EFRHD_SIZE 1
+#define MACB_IRXFCS_OFFSET 19
+#define MACB_IRXFCS_SIZE 1
+
+/* Bitfields in NSR */
+#define MACB_NSR_LINK_OFFSET 0
+#define MACB_NSR_LINK_SIZE 1
+#define MACB_MDIO_OFFSET 1
+#define MACB_MDIO_SIZE 1
+#define MACB_IDLE_OFFSET 2
+#define MACB_IDLE_SIZE 1
+
+/* Bitfields in TSR */
+#define MACB_UBR_OFFSET 0
+#define MACB_UBR_SIZE 1
+#define MACB_COL_OFFSET 1
+#define MACB_COL_SIZE 1
+#define MACB_TSR_RLE_OFFSET 2
+#define MACB_TSR_RLE_SIZE 1
+#define MACB_TGO_OFFSET 3
+#define MACB_TGO_SIZE 1
+#define MACB_BEX_OFFSET 4
+#define MACB_BEX_SIZE 1
+#define MACB_COMP_OFFSET 5
+#define MACB_COMP_SIZE 1
+#define MACB_UND_OFFSET 6
+#define MACB_UND_SIZE 1
+
+/* Bitfields in RSR */
+#define MACB_BNA_OFFSET 0
+#define MACB_BNA_SIZE 1
+#define MACB_REC_OFFSET 1
+#define MACB_REC_SIZE 1
+#define MACB_OVR_OFFSET 2
+#define MACB_OVR_SIZE 1
+
+/* Bitfields in ISR/IER/IDR/IMR */
+#define MACB_MFD_OFFSET 0
+#define MACB_MFD_SIZE 1
+#define MACB_RCOMP_OFFSET 1
+#define MACB_RCOMP_SIZE 1
+#define MACB_RXUBR_OFFSET 2
+#define MACB_RXUBR_SIZE 1
+#define MACB_TXUBR_OFFSET 3
+#define MACB_TXUBR_SIZE 1
+#define MACB_ISR_TUND_OFFSET 4
+#define MACB_ISR_TUND_SIZE 1
+#define MACB_ISR_RLE_OFFSET 5
+#define MACB_ISR_RLE_SIZE 1
+#define MACB_TXERR_OFFSET 6
+#define MACB_TXERR_SIZE 1
+#define MACB_TCOMP_OFFSET 7
+#define MACB_TCOMP_SIZE 1
+#define MACB_ISR_LINK_OFFSET 9
+#define MACB_ISR_LINK_SIZE 1
+#define MACB_ISR_ROVR_OFFSET 10
+#define MACB_ISR_ROVR_SIZE 1
+#define MACB_HRESP_OFFSET 11
+#define MACB_HRESP_SIZE 1
+#define MACB_PFR_OFFSET 12
+#define MACB_PFR_SIZE 1
+#define MACB_PTZ_OFFSET 13
+#define MACB_PTZ_SIZE 1
+
+/* Bitfields in MAN */
+#define MACB_DATA_OFFSET 0
+#define MACB_DATA_SIZE 16
+#define MACB_CODE_OFFSET 16
+#define MACB_CODE_SIZE 2
+#define MACB_REGA_OFFSET 18
+#define MACB_REGA_SIZE 5
+#define MACB_PHYA_OFFSET 23
+#define MACB_PHYA_SIZE 5
+#define MACB_RW_OFFSET 28
+#define MACB_RW_SIZE 2
+#define MACB_SOF_OFFSET 30
+#define MACB_SOF_SIZE 2
+
+/* Bitfields in USRIO */
+#define MACB_MII_OFFSET 0
+#define MACB_MII_SIZE 1
+#define MACB_EAM_OFFSET 1
+#define MACB_EAM_SIZE 1
+#define MACB_TX_PAUSE_OFFSET 2
+#define MACB_TX_PAUSE_SIZE 1
+#define MACB_TX_PAUSE_ZERO_OFFSET 3
+#define MACB_TX_PAUSE_ZERO_SIZE 1
+
+/* Bitfields in WOL */
+#define MACB_IP_OFFSET 0
+#define MACB_IP_SIZE 16
+#define MACB_MAG_OFFSET 16
+#define MACB_MAG_SIZE 1
+#define MACB_ARP_OFFSET 17
+#define MACB_ARP_SIZE 1
+#define MACB_SA1_OFFSET 18
+#define MACB_SA1_SIZE 1
+#define MACB_WOL_MTI_OFFSET 19
+#define MACB_WOL_MTI_SIZE 1
+
+/* Constants for CLK */
+#define MACB_CLK_DIV8 0
+#define MACB_CLK_DIV16 1
+#define MACB_CLK_DIV32 2
+#define MACB_CLK_DIV64 3
+
+/* Constants for MAN register */
+#define MACB_MAN_SOF 1
+#define MACB_MAN_WRITE 1
+#define MACB_MAN_READ 2
+#define MACB_MAN_CODE 2
+
+/* Bit manipulation macros */
+#define MACB_BIT(name) \
+ (1 << MACB_##name##_OFFSET)
+#define MACB_BF(name,value) \
+ (((value) & ((1 << MACB_##name##_SIZE) - 1)) \
+ << MACB_##name##_OFFSET)
+#define MACB_BFEXT(name,value)\
+ (((value) >> MACB_##name##_OFFSET) \
+ & ((1 << MACB_##name##_SIZE) - 1))
+#define MACB_BFINS(name,value,old) \
+ (((old) & ~(((1 << MACB_##name##_SIZE) - 1) \
+ << MACB_##name##_OFFSET)) \
+ | MACB_BF(name,value))
+
+/* Register access macros */
+#define macb_readl(port,reg) \
+ readl((port)->regs + MACB_##reg)
+#define macb_writel(port,reg,value) \
+ writel((value), (port)->regs + MACB_##reg)
+
+#endif /* __DRIVERS_MACB_H__ */
diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c
index 8495829..c6fee18 100644
--- a/drivers/nand/nand_base.c
+++ b/drivers/nand/nand_base.c
@@ -427,8 +427,9 @@
struct nand_chip *this = mtd->priv;
u16 bad;
+ page = (int)(ofs >> this->page_shift) & this->pagemask;
+
if (getchip) {
- page = (int)(ofs >> this->page_shift);
chipnr = (int)(ofs >> this->chip_shift);
/* Grab the lock and see if the device is available */
@@ -436,18 +437,17 @@
/* Select the NAND device */
this->select_chip(mtd, chipnr);
- } else
- page = (int) ofs;
+ }
if (this->options & NAND_BUSWIDTH_16) {
- this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask);
+ this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page);
bad = cpu_to_le16(this->read_word(mtd));
if (this->badblockpos & 0x1)
bad >>= 1;
if ((bad & 0xFF) != 0xff)
res = 1;
} else {
- this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page & this->pagemask);
+ this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page);
if (this->read_byte(mtd) != 0xff)
res = 1;
}
diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c
index 9691675..f170c2d 100644
--- a/drivers/pci_auto.c
+++ b/drivers/pci_auto.c
@@ -34,7 +34,12 @@
void pciauto_region_init(struct pci_region* res)
{
- res->bus_lower = res->bus_start;
+ /*
+ * Avoid allocating PCI resources from address 0 -- this is illegal
+ * according to PCI 2.1 and moreover, this is known to cause Linux IDE
+ * drivers to fail. Use a reasonable starting value of 0x1000 instead.
+ */
+ res->bus_lower = res->bus_start ? res->bus_start : 0x1000;
}
void pciauto_region_align(struct pci_region *res, unsigned long size)
diff --git a/drivers/smc91111.c b/drivers/smc91111.c
index f91e4b9..8061f12 100644
--- a/drivers/smc91111.c
+++ b/drivers/smc91111.c
@@ -1538,9 +1538,9 @@
int smc_get_ethaddr (bd_t * bd)
{
int env_size, rom_valid, env_present = 0, reg;
- char *s = NULL, *e, *v_mac, es[] = "11:22:33:44:55:66";
+ char *s = NULL, *e, es[] = "11:22:33:44:55:66";
char s_env_mac[64];
- uchar v_env_mac[6], v_rom_mac[6];
+ uchar v_env_mac[6], v_rom_mac[6], *v_mac;
env_size = getenv_r ("ethaddr", s_env_mac, sizeof (s_env_mac));
if ((env_size > 0) && (env_size < sizeof (es))) { /* exit if env is bad */
@@ -1563,7 +1563,7 @@
if (!env_present) { /* if NO env */
if (rom_valid) { /* but ROM is valid */
- v_mac = (char *)v_rom_mac;
+ v_mac = v_rom_mac;
sprintf (s_env_mac, "%02X:%02X:%02X:%02X:%02X:%02X",
v_mac[0], v_mac[1], v_mac[2], v_mac[3],
v_mac[4], v_mac[5]);
@@ -1573,7 +1573,7 @@
return (-1);
}
} else { /* good env, don't care ROM */
- v_mac = (char *)v_env_mac; /* always use a good env over a ROM */
+ v_mac = v_env_mac; /* always use a good env over a ROM */
}
if (env_present && rom_valid) { /* if both env and ROM are good */
diff --git a/drivers/systemace.c b/drivers/systemace.c
index 3848d9c..7d82c27 100644
--- a/drivers/systemace.c
+++ b/drivers/systemace.c
@@ -211,10 +211,16 @@
/* Write sector count | ReadMemCardData. */
ace_writew((trans & 0xff) | 0x0300, 0x14);
+/*
+ * For FPGA configuration via SystemACE is reset unacceptable
+ * CFGDONE bit in STATUSREG is not set to 1.
+ */
+#ifndef SYSTEMACE_CONFIG_FPGA
/* Reset the configruation controller */
val = ace_readw(0x18);
val |= 0x0080;
ace_writew(val, 0x18);
+#endif
retry = trans * 16;
while (retry > 0) {
diff --git a/drivers/tsec.c b/drivers/tsec.c
index 3f11eb0..b418773 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -5,7 +5,7 @@
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor, Inc.
* (C) Copyright 2003, Motorola, Inc.
* author Andy Fleming
*
@@ -66,7 +66,11 @@
*/
static struct tsec_info_struct tsec_info[] = {
#if defined(CONFIG_MPC85XX_TSEC1) || defined(CONFIG_MPC83XX_TSEC1)
+#if defined(CONFIG_MPC8544DS)
+ {TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX},
+#else
{TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX},
+#endif
#elif defined(CONFIG_MPC86XX_TSEC1)
{TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX},
#else
@@ -381,6 +385,76 @@
return 0;
}
+/* Generic function which updates the speed and duplex. If
+ * autonegotiation is enabled, it uses the AND of the link
+ * partner's advertised capabilities and our advertised
+ * capabilities. If autonegotiation is disabled, we use the
+ * appropriate bits in the control register.
+ *
+ * Stolen from Linux's mii.c and phy_device.c
+ */
+uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
+{
+ /* We're using autonegotiation */
+ if (mii_reg & PHY_BMSR_AUTN_ABLE) {
+ uint lpa = 0;
+ uint gblpa = 0;
+
+ /* Check for gigabit capability */
+ if (mii_reg & PHY_BMSR_EXT) {
+ /* We want a list of states supported by
+ * both PHYs in the link
+ */
+ gblpa = read_phy_reg(priv, PHY_1000BTSR);
+ gblpa &= read_phy_reg(priv, PHY_1000BTCR) << 2;
+ }
+
+ /* Set the baseline so we only have to set them
+ * if they're different
+ */
+ priv->speed = 10;
+ priv->duplexity = 0;
+
+ /* Check the gigabit fields */
+ if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
+ priv->speed = 1000;
+
+ if (gblpa & PHY_1000BTSR_1000FD)
+ priv->duplexity = 1;
+
+ /* We're done! */
+ return 0;
+ }
+
+ lpa = read_phy_reg(priv, PHY_ANAR);
+ lpa &= read_phy_reg(priv, PHY_ANLPAR);
+
+ if (lpa & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX)) {
+ priv->speed = 100;
+
+ if (lpa & PHY_ANLPAR_TXFD)
+ priv->duplexity = 1;
+
+ } else if (lpa & PHY_ANLPAR_10FD)
+ priv->duplexity = 1;
+ } else {
+ uint bmcr = read_phy_reg(priv, PHY_BMCR);
+
+ priv->speed = 10;
+ priv->duplexity = 0;
+
+ if (bmcr & PHY_BMCR_DPLX)
+ priv->duplexity = 1;
+
+ if (bmcr & PHY_BMCR_1000_MBPS)
+ priv->speed = 1000;
+ else if (bmcr & PHY_BMCR_100_MBPS)
+ priv->speed = 100;
+ }
+
+ return 0;
+}
+
/*
* Parse the BCM54xx status register for speed and duplex information.
* The linux sungem_phy has this information, but in a table format.
@@ -718,6 +792,7 @@
/* Start up the PHY */
if(priv->phyinfo)
phy_run_commands(priv, priv->phyinfo->startup);
+
adjust_link(dev);
/* Enable Transmit and Receive */
@@ -1088,6 +1163,27 @@
{miim_end,}
},
};
+/* a generic flavor. */
+struct phy_info phy_info_generic = {
+ 0,
+ "Unknown/Generic PHY",
+ 32,
+ (struct phy_cmd[]) { /* config */
+ {PHY_BMCR, PHY_BMCR_RESET, NULL},
+ {PHY_BMCR, PHY_BMCR_AUTON|PHY_BMCR_RST_NEG, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ {PHY_BMSR, miim_read, NULL},
+ {PHY_BMSR, miim_read, &mii_parse_sr},
+ {PHY_BMSR, miim_read, &mii_parse_link},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ }
+};
+
uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
{
@@ -1203,6 +1299,7 @@
&phy_info_lxt971,
&phy_info_VSC8244,
&phy_info_dp83865,
+ &phy_info_generic,
NULL
};
diff --git a/drivers/tsec.h b/drivers/tsec.h
index 422bc66..7bf3dee 100644
--- a/drivers/tsec.h
+++ b/drivers/tsec.h
@@ -7,7 +7,7 @@
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor, Inc.
* (C) Copyright 2003, Motorola, Inc.
* maintained by Xianghua Xiao (x.xiao@motorola.com)
* author Andy Fleming
@@ -65,6 +65,7 @@
#define ECNTRL_INIT_SETTINGS 0x00001000
#define ECNTRL_TBI_MODE 0x00000020
#define ECNTRL_R100 0x00000008
+#define ECNTRL_SGMII_MODE 0x00000002
#define miim_end -2
#define miim_read -1
diff --git a/drivers/tsi108_eth.c b/drivers/tsi108_eth.c
new file mode 100644
index 0000000..47341be
--- /dev/null
+++ b/drivers/tsi108_eth.c
@@ -0,0 +1,1036 @@
+/***********************************************************************
+ *
+ * Copyright (c) 2005 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description:
+ * Ethernet interface for Tundra TSI108 bridge chip
+ *
+ ***********************************************************************/
+
+#include <config.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
+ && defined(CONFIG_TSI108_ETH)
+
+#if !defined(CONFIG_TSI108_ETH_NUM_PORTS) || (CONFIG_TSI108_ETH_NUM_PORTS > 2)
+#error "CONFIG_TSI108_ETH_NUM_PORTS must be defined as 1 or 2"
+#endif
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/cache.h>
+
+#ifdef DEBUG
+#define TSI108_ETH_DEBUG 7
+#else
+#define TSI108_ETH_DEBUG 0
+#endif
+
+#if TSI108_ETH_DEBUG > 0
+#define debug_lev(lev, fmt, args...) \
+if (lev <= TSI108_ETH_DEBUG) \
+printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args)
+#else
+#define debug_lev(lev, fmt, args...) do{}while(0)
+#endif
+
+#define RX_PRINT_ERRORS
+#define TX_PRINT_ERRORS
+
+#define ETH_BASE (CFG_TSI108_CSR_BASE + 0x6000)
+
+#define ETH_PORT_OFFSET 0x400
+
+#define __REG32(base, offset) (*((volatile u32 *)((char *)(base) + (offset))))
+
+#define reg_MAC_CONFIG_1(base) __REG32(base, 0x00000000)
+#define MAC_CONFIG_1_TX_ENABLE (0x00000001)
+#define MAC_CONFIG_1_SYNC_TX_ENABLE (0x00000002)
+#define MAC_CONFIG_1_RX_ENABLE (0x00000004)
+#define MAC_CONFIG_1_SYNC_RX_ENABLE (0x00000008)
+#define MAC_CONFIG_1_TX_FLOW_CONTROL (0x00000010)
+#define MAC_CONFIG_1_RX_FLOW_CONTROL (0x00000020)
+#define MAC_CONFIG_1_LOOP_BACK (0x00000100)
+#define MAC_CONFIG_1_RESET_TX_FUNCTION (0x00010000)
+#define MAC_CONFIG_1_RESET_RX_FUNCTION (0x00020000)
+#define MAC_CONFIG_1_RESET_TX_MAC (0x00040000)
+#define MAC_CONFIG_1_RESET_RX_MAC (0x00080000)
+#define MAC_CONFIG_1_SIM_RESET (0x40000000)
+#define MAC_CONFIG_1_SOFT_RESET (0x80000000)
+
+#define reg_MAC_CONFIG_2(base) __REG32(base, 0x00000004)
+#define MAC_CONFIG_2_FULL_DUPLEX (0x00000001)
+#define MAC_CONFIG_2_CRC_ENABLE (0x00000002)
+#define MAC_CONFIG_2_PAD_CRC (0x00000004)
+#define MAC_CONFIG_2_LENGTH_CHECK (0x00000010)
+#define MAC_CONFIG_2_HUGE_FRAME (0x00000020)
+#define MAC_CONFIG_2_INTERFACE_MODE(val) (((val) & 0x3) << 8)
+#define MAC_CONFIG_2_PREAMBLE_LENGTH(val) (((val) & 0xf) << 12)
+#define INTERFACE_MODE_NIBBLE 1 /* 10/100 Mb/s MII) */
+#define INTERFACE_MODE_BYTE 2 /* 1000 Mb/s GMII/TBI */
+
+#define reg_MAXIMUM_FRAME_LENGTH(base) __REG32(base, 0x00000010)
+
+#define reg_MII_MGMT_CONFIG(base) __REG32(base, 0x00000020)
+#define MII_MGMT_CONFIG_MGMT_CLOCK_SELECT(val) ((val) & 0x7)
+#define MII_MGMT_CONFIG_NO_PREAMBLE (0x00000010)
+#define MII_MGMT_CONFIG_SCAN_INCREMENT (0x00000020)
+#define MII_MGMT_CONFIG_RESET_MGMT (0x80000000)
+
+#define reg_MII_MGMT_COMMAND(base) __REG32(base, 0x00000024)
+#define MII_MGMT_COMMAND_READ_CYCLE (0x00000001)
+#define MII_MGMT_COMMAND_SCAN_CYCLE (0x00000002)
+
+#define reg_MII_MGMT_ADDRESS(base) __REG32(base, 0x00000028)
+#define reg_MII_MGMT_CONTROL(base) __REG32(base, 0x0000002c)
+#define reg_MII_MGMT_STATUS(base) __REG32(base, 0x00000030)
+
+#define reg_MII_MGMT_INDICATORS(base) __REG32(base, 0x00000034)
+#define MII_MGMT_INDICATORS_BUSY (0x00000001)
+#define MII_MGMT_INDICATORS_SCAN (0x00000002)
+#define MII_MGMT_INDICATORS_NOT_VALID (0x00000004)
+
+#define reg_INTERFACE_STATUS(base) __REG32(base, 0x0000003c)
+#define INTERFACE_STATUS_LINK_FAIL (0x00000008)
+#define INTERFACE_STATUS_EXCESS_DEFER (0x00000200)
+
+#define reg_STATION_ADDRESS_1(base) __REG32(base, 0x00000040)
+#define reg_STATION_ADDRESS_2(base) __REG32(base, 0x00000044)
+
+#define reg_PORT_CONTROL(base) __REG32(base, 0x00000200)
+#define PORT_CONTROL_PRI (0x00000001)
+#define PORT_CONTROL_BPT (0x00010000)
+#define PORT_CONTROL_SPD (0x00040000)
+#define PORT_CONTROL_RBC (0x00080000)
+#define PORT_CONTROL_PRB (0x00200000)
+#define PORT_CONTROL_DIS (0x00400000)
+#define PORT_CONTROL_TBI (0x00800000)
+#define PORT_CONTROL_STE (0x10000000)
+#define PORT_CONTROL_ZOR (0x20000000)
+#define PORT_CONTROL_CLR (0x40000000)
+#define PORT_CONTROL_SRT (0x80000000)
+
+#define reg_TX_CONFIG(base) __REG32(base, 0x00000220)
+#define TX_CONFIG_START_Q (0x00000003)
+#define TX_CONFIG_EHP (0x00400000)
+#define TX_CONFIG_CHP (0x00800000)
+#define TX_CONFIG_RST (0x80000000)
+
+#define reg_TX_CONTROL(base) __REG32(base, 0x00000224)
+#define TX_CONTROL_GO (0x00008000)
+#define TX_CONTROL_MP (0x01000000)
+#define TX_CONTROL_EAI (0x20000000)
+#define TX_CONTROL_ABT (0x40000000)
+#define TX_CONTROL_EII (0x80000000)
+
+#define reg_TX_STATUS(base) __REG32(base, 0x00000228)
+#define TX_STATUS_QUEUE_USABLE (0x0000000f)
+#define TX_STATUS_CURR_Q (0x00000300)
+#define TX_STATUS_ACT (0x00008000)
+#define TX_STATUS_QUEUE_IDLE (0x000f0000)
+#define TX_STATUS_EOQ_PENDING (0x0f000000)
+
+#define reg_TX_EXTENDED_STATUS(base) __REG32(base, 0x0000022c)
+#define TX_EXTENDED_STATUS_END_OF_QUEUE_CONDITION (0x0000000f)
+#define TX_EXTENDED_STATUS_END_OF_FRAME_CONDITION (0x00000f00)
+#define TX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000)
+#define TX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000)
+
+#define reg_TX_THRESHOLDS(base) __REG32(base, 0x00000230)
+
+#define reg_TX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000270)
+#define TX_DIAGNOSTIC_ADDR_INDEX (0x0000007f)
+#define TX_DIAGNOSTIC_ADDR_DFR (0x40000000)
+#define TX_DIAGNOSTIC_ADDR_AI (0x80000000)
+
+#define reg_TX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000274)
+
+#define reg_TX_ERROR_STATUS(base) __REG32(base, 0x00000278)
+#define TX_ERROR_STATUS (0x00000278)
+#define TX_ERROR_STATUS_QUEUE_0_ERROR_RESPONSE (0x0000000f)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_0 (0x00000010)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_0 (0x00000020)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_0 (0x00000040)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_0 (0x00000080)
+#define TX_ERROR_STATUS_QUEUE_1_ERROR_RESPONSE (0x00000f00)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_1 (0x00001000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_1 (0x00002000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_1 (0x00004000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_1 (0x00008000)
+#define TX_ERROR_STATUS_QUEUE_2_ERROR_RESPONSE (0x000f0000)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_2 (0x00100000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_2 (0x00200000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_2 (0x00400000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_2 (0x00800000)
+#define TX_ERROR_STATUS_QUEUE_3_ERROR_RESPONSE (0x0f000000)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_3 (0x10000000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_3 (0x20000000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_3 (0x40000000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_3 (0x80000000)
+
+#define reg_TX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000280)
+#define TX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f)
+#define TX_QUEUE_0_CONFIG_BSWP (0x00000400)
+#define TX_QUEUE_0_CONFIG_WSWP (0x00000800)
+#define TX_QUEUE_0_CONFIG_AM (0x00004000)
+#define TX_QUEUE_0_CONFIG_GVI (0x00008000)
+#define TX_QUEUE_0_CONFIG_EEI (0x00010000)
+#define TX_QUEUE_0_CONFIG_ELI (0x00020000)
+#define TX_QUEUE_0_CONFIG_ENI (0x00040000)
+#define TX_QUEUE_0_CONFIG_ESI (0x00080000)
+#define TX_QUEUE_0_CONFIG_EDI (0x00100000)
+
+#define reg_TX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000284)
+#define TX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f)
+#define TX_QUEUE_0_BUF_CONFIG_BURST (0x00000300)
+#define TX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400)
+#define TX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800)
+
+#define OCN_PORT_HLP 0 /* HLP Interface */
+#define OCN_PORT_PCI_X 1 /* PCI-X Interface */
+#define OCN_PORT_PROCESSOR_MASTER 2 /* Processor Interface (master) */
+#define OCN_PORT_PROCESSOR_SLAVE 3 /* Processor Interface (slave) */
+#define OCN_PORT_MEMORY 4 /* Memory Controller */
+#define OCN_PORT_DMA 5 /* DMA Controller */
+#define OCN_PORT_ETHERNET 6 /* Ethernet Controller */
+#define OCN_PORT_PRINT 7 /* Print Engine Interface */
+
+#define reg_TX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000288)
+
+#define reg_TX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000028c)
+#define TX_QUEUE_0_PTR_HIGH_VALID (0x80000000)
+
+#define reg_RX_CONFIG(base) __REG32(base, 0x00000320)
+#define RX_CONFIG_DEF_Q (0x00000003)
+#define RX_CONFIG_EMF (0x00000100)
+#define RX_CONFIG_EUF (0x00000200)
+#define RX_CONFIG_BFE (0x00000400)
+#define RX_CONFIG_MFE (0x00000800)
+#define RX_CONFIG_UFE (0x00001000)
+#define RX_CONFIG_SE (0x00002000)
+#define RX_CONFIG_ABF (0x00200000)
+#define RX_CONFIG_APE (0x00400000)
+#define RX_CONFIG_CHP (0x00800000)
+#define RX_CONFIG_RST (0x80000000)
+
+#define reg_RX_CONTROL(base) __REG32(base, 0x00000324)
+#define GE_E0_RX_CONTROL_QUEUE_ENABLES (0x0000000f)
+#define GE_E0_RX_CONTROL_GO (0x00008000)
+#define GE_E0_RX_CONTROL_EAI (0x20000000)
+#define GE_E0_RX_CONTROL_ABT (0x40000000)
+#define GE_E0_RX_CONTROL_EII (0x80000000)
+
+#define reg_RX_EXTENDED_STATUS(base) __REG32(base, 0x0000032c)
+#define RX_EXTENDED_STATUS (0x0000032c)
+#define RX_EXTENDED_STATUS_EOQ (0x0000000f)
+#define RX_EXTENDED_STATUS_EOQ_0 (0x00000001)
+#define RX_EXTENDED_STATUS_EOF (0x00000f00)
+#define RX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000)
+#define RX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000)
+
+#define reg_RX_THRESHOLDS(base) __REG32(base, 0x00000330)
+
+#define reg_RX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000370)
+#define RX_DIAGNOSTIC_ADDR_INDEX (0x0000007f)
+#define RX_DIAGNOSTIC_ADDR_DFR (0x40000000)
+#define RX_DIAGNOSTIC_ADDR_AI (0x80000000)
+
+#define reg_RX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000374)
+
+#define reg_RX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000380)
+#define RX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f)
+#define RX_QUEUE_0_CONFIG_BSWP (0x00000400)
+#define RX_QUEUE_0_CONFIG_WSWP (0x00000800)
+#define RX_QUEUE_0_CONFIG_AM (0x00004000)
+#define RX_QUEUE_0_CONFIG_EEI (0x00010000)
+#define RX_QUEUE_0_CONFIG_ELI (0x00020000)
+#define RX_QUEUE_0_CONFIG_ENI (0x00040000)
+#define RX_QUEUE_0_CONFIG_ESI (0x00080000)
+#define RX_QUEUE_0_CONFIG_EDI (0x00100000)
+
+#define reg_RX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000384)
+#define RX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f)
+#define RX_QUEUE_0_BUF_CONFIG_BURST (0x00000300)
+#define RX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400)
+#define RX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800)
+
+#define reg_RX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000388)
+
+#define reg_RX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000038c)
+#define RX_QUEUE_0_PTR_HIGH_VALID (0x80000000)
+
+/*
+ * PHY register definitions
+ */
+/* the first 15 PHY registers are standard. */
+#define PHY_CTRL_REG 0 /* Control Register */
+#define PHY_STATUS_REG 1 /* Status Regiser */
+#define PHY_ID1_REG 2 /* Phy Id Reg (word 1) */
+#define PHY_ID2_REG 3 /* Phy Id Reg (word 2) */
+#define PHY_AN_ADV_REG 4 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY_REG 5 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP_REG 6 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX_REG 7 /* Next Page TX */
+#define PHY_LP_NEXT_PAGE_REG 8 /* Link Partner Next Page */
+#define PHY_1000T_CTRL_REG 9 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS_REG 10 /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS_REG 11 /* Extended Status Reg */
+
+/*
+ * PHY Register bit masks.
+ */
+#define PHY_CTRL_RESET (1 << 15)
+#define PHY_CTRL_LOOPBACK (1 << 14)
+#define PHY_CTRL_SPEED0 (1 << 13)
+#define PHY_CTRL_AN_EN (1 << 12)
+#define PHY_CTRL_PWR_DN (1 << 11)
+#define PHY_CTRL_ISOLATE (1 << 10)
+#define PHY_CTRL_RESTART_AN (1 << 9)
+#define PHY_CTRL_FULL_DUPLEX (1 << 8)
+#define PHY_CTRL_CT_EN (1 << 7)
+#define PHY_CTRL_SPEED1 (1 << 6)
+
+#define PHY_STAT_100BASE_T4 (1 << 15)
+#define PHY_STAT_100BASE_X_FD (1 << 14)
+#define PHY_STAT_100BASE_X_HD (1 << 13)
+#define PHY_STAT_10BASE_T_FD (1 << 12)
+#define PHY_STAT_10BASE_T_HD (1 << 11)
+#define PHY_STAT_100BASE_T2_FD (1 << 10)
+#define PHY_STAT_100BASE_T2_HD (1 << 9)
+#define PHY_STAT_EXT_STAT (1 << 8)
+#define PHY_STAT_RESERVED (1 << 7)
+#define PHY_STAT_MFPS (1 << 6) /* Management Frames Preamble Suppression */
+#define PHY_STAT_AN_COMPLETE (1 << 5)
+#define PHY_STAT_REM_FAULT (1 << 4)
+#define PHY_STAT_AN_CAP (1 << 3)
+#define PHY_STAT_LINK_UP (1 << 2)
+#define PHY_STAT_JABBER (1 << 1)
+#define PHY_STAT_EXT_CAP (1 << 0)
+
+#define TBI_CONTROL_2 0x11
+#define TBI_CONTROL_2_ENABLE_COMMA_DETECT 0x0001
+#define TBI_CONTROL_2_ENABLE_WRAP 0x0002
+#define TBI_CONTROL_2_G_MII_MODE 0x0010
+#define TBI_CONTROL_2_RECEIVE_CLOCK_SELECT 0x0020
+#define TBI_CONTROL_2_AUTO_NEGOTIATION_SENSE 0x0100
+#define TBI_CONTROL_2_DISABLE_TRANSMIT_RUNNING_DISPARITY 0x1000
+#define TBI_CONTROL_2_DISABLE_RECEIVE_RUNNING_DISPARITY 0x2000
+#define TBI_CONTROL_2_SHORTCUT_LINK_TIMER 0x4000
+#define TBI_CONTROL_2_SOFT_RESET 0x8000
+
+/* marvel specific */
+#define MV1111_EXT_CTRL1_REG 16 /* PHY Specific Control Reg */
+#define MV1111_SPEC_STAT_REG 17 /* PHY Specific Status Reg */
+#define MV1111_EXT_CTRL2_REG 20 /* Extended PHY Specific Control Reg */
+
+/*
+ * MARVELL 88E1111 PHY register bit masks
+ */
+/* PHY Specific Status Register (MV1111_EXT_CTRL1_REG) */
+
+#define SPEC_STAT_SPEED_MASK (3 << 14)
+#define SPEC_STAT_FULL_DUP (1 << 13)
+#define SPEC_STAT_PAGE_RCVD (1 << 12)
+#define SPEC_STAT_RESOLVED (1 << 11) /* Speed and Duplex Resolved */
+#define SPEC_STAT_LINK_UP (1 << 10)
+#define SPEC_STAT_CABLE_LEN_MASK (7 << 7)/* Cable Length (100/1000 modes only) */
+#define SPEC_STAT_MDIX (1 << 6)
+#define SPEC_STAT_POLARITY (1 << 1)
+#define SPEC_STAT_JABBER (1 << 0)
+
+#define SPEED_1000 (2 << 14)
+#define SPEED_100 (1 << 14)
+#define SPEED_10 (0 << 14)
+
+#define TBI_ADDR 0x1E /* Ten Bit Interface address */
+
+/* negotiated link parameters */
+#define LINK_SPEED_UNKNOWN 0
+#define LINK_SPEED_10 1
+#define LINK_SPEED_100 2
+#define LINK_SPEED_1000 3
+
+#define LINK_DUPLEX_UNKNOWN 0
+#define LINK_DUPLEX_HALF 1
+#define LINK_DUPLEX_FULL 2
+
+static unsigned int phy_address[] = { 8, 9 };
+
+#define vuint32 volatile u32
+
+/* TX/RX buffer descriptors. MUST be cache line aligned in memory. (32 byte)
+ * This structure is accessed by the ethernet DMA engine which means it
+ * MUST be in LITTLE ENDIAN format */
+struct dma_descriptor {
+ vuint32 start_addr0; /* buffer address, least significant bytes. */
+ vuint32 start_addr1; /* buffer address, most significant bytes. */
+ vuint32 next_descr_addr0;/* next descriptor address, least significant bytes. Must be 64-bit aligned. */
+ vuint32 next_descr_addr1;/* next descriptor address, most significant bytes. */
+ vuint32 vlan_byte_count;/* VLAN tag(top 2 bytes) and byte countt (bottom 2 bytes). */
+ vuint32 config_status; /* Configuration/Status. */
+ vuint32 reserved1; /* reserved to make the descriptor cache line aligned. */
+ vuint32 reserved2; /* reserved to make the descriptor cache line aligned. */
+};
+
+/* last next descriptor address flag */
+#define DMA_DESCR_LAST (1 << 31)
+
+/* TX DMA descriptor config status bits */
+#define DMA_DESCR_TX_EOF (1 << 0) /* end of frame */
+#define DMA_DESCR_TX_SOF (1 << 1) /* start of frame */
+#define DMA_DESCR_TX_PFVLAN (1 << 2)
+#define DMA_DESCR_TX_HUGE (1 << 3)
+#define DMA_DESCR_TX_PAD (1 << 4)
+#define DMA_DESCR_TX_CRC (1 << 5)
+#define DMA_DESCR_TX_DESCR_INT (1 << 14)
+#define DMA_DESCR_TX_RETRY_COUNT 0x000F0000
+#define DMA_DESCR_TX_ONE_COLLISION (1 << 20)
+#define DMA_DESCR_TX_LATE_COLLISION (1 << 24)
+#define DMA_DESCR_TX_UNDERRUN (1 << 25)
+#define DMA_DESCR_TX_RETRY_LIMIT (1 << 26)
+#define DMA_DESCR_TX_OK (1 << 30)
+#define DMA_DESCR_TX_OWNER (1 << 31)
+
+/* RX DMA descriptor status bits */
+#define DMA_DESCR_RX_EOF (1 << 0)
+#define DMA_DESCR_RX_SOF (1 << 1)
+#define DMA_DESCR_RX_VTF (1 << 2)
+#define DMA_DESCR_RX_FRAME_IS_TYPE (1 << 3)
+#define DMA_DESCR_RX_SHORT_FRAME (1 << 4)
+#define DMA_DESCR_RX_HASH_MATCH (1 << 7)
+#define DMA_DESCR_RX_BAD_FRAME (1 << 8)
+#define DMA_DESCR_RX_OVERRUN (1 << 9)
+#define DMA_DESCR_RX_MAX_FRAME_LEN (1 << 11)
+#define DMA_DESCR_RX_CRC_ERROR (1 << 12)
+#define DMA_DESCR_RX_DESCR_INT (1 << 13)
+#define DMA_DESCR_RX_OWNER (1 << 15)
+
+#define RX_BUFFER_SIZE PKTSIZE
+#define NUM_RX_DESC PKTBUFSRX
+
+static struct dma_descriptor tx_descriptor __attribute__ ((aligned(32)));
+
+static struct dma_descriptor rx_descr_array[NUM_RX_DESC]
+ __attribute__ ((aligned(32)));
+
+static struct dma_descriptor *rx_descr_current;
+
+static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis);
+static int tsi108_eth_send (struct eth_device *dev,
+ volatile void *packet, int length);
+static int tsi108_eth_recv (struct eth_device *dev);
+static void tsi108_eth_halt (struct eth_device *dev);
+static unsigned int read_phy (unsigned int base,
+ unsigned int phy_addr, unsigned int phy_reg);
+static void write_phy (unsigned int base,
+ unsigned int phy_addr,
+ unsigned int phy_reg, unsigned int phy_data);
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print phy debug infomation
+ */
+static void dump_phy_regs (unsigned int phy_addr)
+{
+ int i;
+
+ printf ("PHY %d registers\n", phy_addr);
+ for (i = 0; i <= 30; i++) {
+ printf ("%2d 0x%04x\n", i, read_phy (ETH_BASE, phy_addr, i));
+ }
+ printf ("\n");
+
+}
+#else
+#define dump_phy_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void tx_diag_regs (unsigned int base)
+{
+ int i;
+ unsigned long dummy;
+
+ printf ("TX diagnostics registers\n");
+ reg_TX_DIAGNOSTIC_ADDR(base) = 0x00 | TX_DIAGNOSTIC_ADDR_AI;
+ udelay (1000);
+ dummy = reg_TX_DIAGNOSTIC_DATA(base);
+ for (i = 0x00; i <= 0x05; i++) {
+ udelay (1000);
+ printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base));
+ }
+ reg_TX_DIAGNOSTIC_ADDR(base) = 0x40 | TX_DIAGNOSTIC_ADDR_AI;
+ udelay (1000);
+ dummy = reg_TX_DIAGNOSTIC_DATA(base);
+ for (i = 0x40; i <= 0x47; i++) {
+ udelay (1000);
+ printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base));
+ }
+ printf ("\n");
+
+}
+#else
+#define tx_diag_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void rx_diag_regs (unsigned int base)
+{
+ int i;
+ unsigned long dummy;
+
+ printf ("RX diagnostics registers\n");
+ reg_RX_DIAGNOSTIC_ADDR(base) = 0x00 | RX_DIAGNOSTIC_ADDR_AI;
+ udelay (1000);
+ dummy = reg_RX_DIAGNOSTIC_DATA(base);
+ for (i = 0x00; i <= 0x05; i++) {
+ udelay (1000);
+ printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base));
+ }
+ reg_RX_DIAGNOSTIC_ADDR(base) = 0x40 | RX_DIAGNOSTIC_ADDR_AI;
+ udelay (1000);
+ dummy = reg_RX_DIAGNOSTIC_DATA(base);
+ for (i = 0x08; i <= 0x0a; i++) {
+ udelay (1000);
+ printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base));
+ }
+ printf ("\n");
+
+}
+#else
+#define rx_diag_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void debug_mii_regs (unsigned int base)
+{
+ printf ("MII_MGMT_CONFIG 0x%08x\n", reg_MII_MGMT_CONFIG(base));
+ printf ("MII_MGMT_COMMAND 0x%08x\n", reg_MII_MGMT_COMMAND(base));
+ printf ("MII_MGMT_ADDRESS 0x%08x\n", reg_MII_MGMT_ADDRESS(base));
+ printf ("MII_MGMT_CONTROL 0x%08x\n", reg_MII_MGMT_CONTROL(base));
+ printf ("MII_MGMT_STATUS 0x%08x\n", reg_MII_MGMT_STATUS(base));
+ printf ("MII_MGMT_INDICATORS 0x%08x\n", reg_MII_MGMT_INDICATORS(base));
+ printf ("\n");
+
+}
+#else
+#define debug_mii_regs(base) do{}while(0)
+#endif
+
+/*
+ * Wait until the phy bus is non-busy
+ */
+static void phy_wait (unsigned int base, unsigned int condition)
+{
+ int timeout;
+
+ timeout = 0;
+ while (reg_MII_MGMT_INDICATORS(base) & condition) {
+ udelay (10);
+ if (++timeout > 10000) {
+ printf ("ERROR: timeout waiting for phy bus (%d)\n",
+ condition);
+ break;
+ }
+ }
+}
+
+/*
+ * read phy register
+ */
+static unsigned int read_phy (unsigned int base,
+ unsigned int phy_addr, unsigned int phy_reg)
+{
+ unsigned int value;
+
+ phy_wait (base, MII_MGMT_INDICATORS_BUSY);
+
+ reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg;
+
+ /* Ensure that the Read Cycle bit is cleared prior to next read cycle */
+ reg_MII_MGMT_COMMAND(base) = 0;
+
+ /* start the read */
+ reg_MII_MGMT_COMMAND(base) = MII_MGMT_COMMAND_READ_CYCLE;
+
+ /* wait for the read to complete */
+ phy_wait (base,
+ MII_MGMT_INDICATORS_NOT_VALID | MII_MGMT_INDICATORS_BUSY);
+
+ value = reg_MII_MGMT_STATUS(base);
+
+ reg_MII_MGMT_COMMAND(base) = 0;
+
+ return value;
+}
+
+/*
+ * write phy register
+ */
+static void write_phy (unsigned int base,
+ unsigned int phy_addr,
+ unsigned int phy_reg, unsigned int phy_data)
+{
+ phy_wait (base, MII_MGMT_INDICATORS_BUSY);
+
+ reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg;
+
+ /* Ensure that the Read Cycle bit is cleared prior to next cycle */
+ reg_MII_MGMT_COMMAND(base) = 0;
+
+ /* start the write */
+ reg_MII_MGMT_CONTROL(base) = phy_data;
+}
+
+/*
+ * configure the marvell 88e1111 phy
+ */
+static int marvell_88e_phy_config (struct eth_device *dev, int *speed,
+ int *duplex)
+{
+ unsigned long base;
+ unsigned long phy_addr;
+ unsigned int phy_status;
+ unsigned int phy_spec_status;
+ int timeout;
+ int phy_speed;
+ int phy_duplex;
+ unsigned int value;
+
+ phy_speed = LINK_SPEED_UNKNOWN;
+ phy_duplex = LINK_DUPLEX_UNKNOWN;
+
+ base = dev->iobase;
+ phy_addr = (unsigned long)dev->priv;
+
+ /* Take the PHY out of reset. */
+ write_phy (ETH_BASE, phy_addr, PHY_CTRL_REG, PHY_CTRL_RESET);
+
+ /* Wait for the reset process to complete. */
+ udelay (10);
+ timeout = 0;
+ while ((phy_status =
+ read_phy (ETH_BASE, phy_addr, PHY_CTRL_REG)) & PHY_CTRL_RESET) {
+ udelay (10);
+ if (++timeout > 10000) {
+ printf ("ERROR: timeout waiting for phy reset\n");
+ break;
+ }
+ }
+
+ /* TBI Configuration. */
+ write_phy (base, TBI_ADDR, TBI_CONTROL_2, TBI_CONTROL_2_G_MII_MODE |
+ TBI_CONTROL_2_RECEIVE_CLOCK_SELECT);
+ /* Wait for the link to be established. */
+ timeout = 0;
+ do {
+ udelay (20000);
+ phy_status = read_phy (ETH_BASE, phy_addr, PHY_STATUS_REG);
+ if (++timeout > 100) {
+ debug_lev(1, "ERROR: unable to establish link!!!\n");
+ break;
+ }
+ } while ((phy_status & PHY_STAT_LINK_UP) == 0);
+
+ if ((phy_status & PHY_STAT_LINK_UP) == 0)
+ return 0;
+
+ value = 0;
+ phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG);
+ if (phy_spec_status & SPEC_STAT_RESOLVED) {
+ switch (phy_spec_status & SPEC_STAT_SPEED_MASK) {
+ case SPEED_1000:
+ phy_speed = LINK_SPEED_1000;
+ value |= PHY_CTRL_SPEED1;
+ break;
+ case SPEED_100:
+ phy_speed = LINK_SPEED_100;
+ value |= PHY_CTRL_SPEED0;
+ break;
+ case SPEED_10:
+ phy_speed = LINK_SPEED_10;
+ break;
+ }
+ if (phy_spec_status & SPEC_STAT_FULL_DUP) {
+ phy_duplex = LINK_DUPLEX_FULL;
+ value |= PHY_CTRL_FULL_DUPLEX;
+ } else
+ phy_duplex = LINK_DUPLEX_HALF;
+ }
+ /* set TBI speed */
+ write_phy (base, TBI_ADDR, PHY_CTRL_REG, value);
+ write_phy (base, TBI_ADDR, PHY_AN_ADV_REG, 0x0060);
+
+#if TSI108_ETH_DEBUG > 0
+ printf ("%s link is up", dev->name);
+ phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG);
+ if (phy_spec_status & SPEC_STAT_RESOLVED) {
+ switch (phy_speed) {
+ case LINK_SPEED_1000:
+ printf (", 1000 Mbps");
+ break;
+ case LINK_SPEED_100:
+ printf (", 100 Mbps");
+ break;
+ case LINK_SPEED_10:
+ printf (", 10 Mbps");
+ break;
+ }
+ if (phy_duplex == LINK_DUPLEX_FULL)
+ printf (", Full duplex");
+ else
+ printf (", Half duplex");
+ }
+ printf ("\n");
+#endif
+
+ dump_phy_regs (TBI_ADDR);
+ if (speed)
+ *speed = phy_speed;
+ if (duplex)
+ *duplex = phy_duplex;
+
+ return 1;
+}
+
+/*
+ * External interface
+ *
+ * register the tsi108 ethernet controllers with the multi-ethernet system
+ */
+int tsi108_eth_initialize (bd_t * bis)
+{
+ struct eth_device *dev;
+ int index;
+
+ for (index = 0; index < CONFIG_TSI108_ETH_NUM_PORTS; index++) {
+ dev = (struct eth_device *)malloc(sizeof(struct eth_device));
+
+ sprintf (dev->name, "TSI108_eth%d", index);
+
+ dev->iobase = ETH_BASE + (index * ETH_PORT_OFFSET);
+ dev->priv = (void *)(phy_address[index]);
+ dev->init = tsi108_eth_probe;
+ dev->halt = tsi108_eth_halt;
+ dev->send = tsi108_eth_send;
+ dev->recv = tsi108_eth_recv;
+
+ eth_register(dev);
+ }
+ return index;
+}
+
+/*
+ * probe for and initialize a single ethernet interface
+ */
+static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis)
+{
+ unsigned long base;
+ unsigned long value;
+ int index;
+ struct dma_descriptor *tx_descr;
+ struct dma_descriptor *rx_descr;
+ int speed;
+ int duplex;
+
+ base = dev->iobase;
+
+ reg_PORT_CONTROL(base) = PORT_CONTROL_STE | PORT_CONTROL_BPT;
+
+ /* Bring DMA/FIFO out of reset. */
+ reg_TX_CONFIG(base) = 0x00000000;
+ reg_RX_CONFIG(base) = 0x00000000;
+
+ reg_TX_THRESHOLDS(base) = (192 << 16) | 192;
+ reg_RX_THRESHOLDS(base) = (192 << 16) | 112;
+
+ /* Bring MAC out of reset. */
+ reg_MAC_CONFIG_1(base) = 0x00000000;
+
+ /* DMA MAC configuration. */
+ reg_MAC_CONFIG_1(base) =
+ MAC_CONFIG_1_RX_ENABLE | MAC_CONFIG_1_TX_ENABLE;
+
+ reg_MII_MGMT_CONFIG(base) = MII_MGMT_CONFIG_NO_PREAMBLE;
+ reg_MAXIMUM_FRAME_LENGTH(base) = RX_BUFFER_SIZE;
+
+ /* Note: Early tsi108 manual did not have correct byte order
+ * for the station address.*/
+ reg_STATION_ADDRESS_1(base) = (dev->enetaddr[5] << 24) |
+ (dev->enetaddr[4] << 16) |
+ (dev->enetaddr[3] << 8) | (dev->enetaddr[2] << 0);
+
+ reg_STATION_ADDRESS_2(base) = (dev->enetaddr[1] << 24) |
+ (dev->enetaddr[0] << 16);
+
+ if (marvell_88e_phy_config(dev, &speed, &duplex) == 0)
+ return 0;
+
+ value =
+ MAC_CONFIG_2_PREAMBLE_LENGTH(7) | MAC_CONFIG_2_PAD_CRC |
+ MAC_CONFIG_2_CRC_ENABLE;
+ if (speed == LINK_SPEED_1000)
+ value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_BYTE);
+ else {
+ value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_NIBBLE);
+ reg_PORT_CONTROL(base) |= PORT_CONTROL_SPD;
+ }
+ if (duplex == LINK_DUPLEX_FULL) {
+ value |= MAC_CONFIG_2_FULL_DUPLEX;
+ reg_PORT_CONTROL(base) &= ~PORT_CONTROL_BPT;
+ } else
+ reg_PORT_CONTROL(base) |= PORT_CONTROL_BPT;
+ reg_MAC_CONFIG_2(base) = value;
+
+ reg_RX_CONFIG(base) = RX_CONFIG_SE;
+ reg_RX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY;
+ reg_RX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY;
+
+ /* initialize the RX DMA descriptors */
+ rx_descr = &rx_descr_array[0];
+ rx_descr_current = rx_descr;
+ for (index = 0; index < NUM_RX_DESC; index++) {
+ /* make sure the receive buffers are not in cache */
+ invalidate_dcache_range((unsigned long)NetRxPackets[index],
+ (unsigned long)NetRxPackets[index] +
+ RX_BUFFER_SIZE);
+ rx_descr->start_addr0 =
+ cpu_to_le32((vuint32) NetRxPackets[index]);
+ rx_descr->start_addr1 = 0;
+ rx_descr->next_descr_addr0 =
+ cpu_to_le32((vuint32) (rx_descr + 1));
+ rx_descr->next_descr_addr1 = 0;
+ rx_descr->vlan_byte_count = 0;
+ rx_descr->config_status = cpu_to_le32((RX_BUFFER_SIZE << 16) |
+ DMA_DESCR_RX_OWNER);
+ rx_descr++;
+ }
+ rx_descr--;
+ rx_descr->next_descr_addr0 = 0;
+ rx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+ /* Push the descriptors to RAM so the ethernet DMA can see them */
+ invalidate_dcache_range((unsigned long)rx_descr_array,
+ (unsigned long)rx_descr_array +
+ sizeof(rx_descr_array));
+
+ /* enable RX queue */
+ reg_RX_CONTROL(base) = TX_CONTROL_GO | 0x01;
+ reg_RX_QUEUE_0_PTR_LOW(base) = (u32) rx_descr_current;
+ /* enable receive DMA */
+ reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID;
+
+ reg_TX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY;
+ reg_TX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY;
+
+ /* initialize the TX DMA descriptor */
+ tx_descr = &tx_descriptor;
+
+ tx_descr->start_addr0 = 0;
+ tx_descr->start_addr1 = 0;
+ tx_descr->next_descr_addr0 = 0;
+ tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+ tx_descr->vlan_byte_count = 0;
+ tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OK |
+ DMA_DESCR_TX_SOF |
+ DMA_DESCR_TX_EOF);
+ /* enable TX queue */
+ reg_TX_CONTROL(base) = TX_CONTROL_GO | 0x01;
+
+ return 1;
+}
+
+/*
+ * send a packet
+ */
+static int tsi108_eth_send (struct eth_device *dev,
+ volatile void *packet, int length)
+{
+ unsigned long base;
+ int timeout;
+ struct dma_descriptor *tx_descr;
+ unsigned long status;
+
+ base = dev->iobase;
+ tx_descr = &tx_descriptor;
+
+ /* Wait until the last packet has been transmitted. */
+ timeout = 0;
+ do {
+ /* make sure we see the changes made by the DMA engine */
+ invalidate_dcache_range((unsigned long)tx_descr,
+ (unsigned long)tx_descr +
+ sizeof(struct dma_descriptor));
+
+ if (timeout != 0)
+ udelay (15);
+ if (++timeout > 10000) {
+ tx_diag_regs(base);
+ debug_lev(1,
+ "ERROR: timeout waiting for last transmit packet to be sent\n");
+ return 0;
+ }
+ } while (tx_descr->config_status & cpu_to_le32(DMA_DESCR_TX_OWNER));
+
+ status = le32_to_cpu(tx_descr->config_status);
+ if ((status & DMA_DESCR_TX_OK) == 0) {
+#ifdef TX_PRINT_ERRORS
+ printf ("TX packet error: 0x%08x\n %s%s%s%s\n", status,
+ status & DMA_DESCR_TX_OK ? "tx error, " : "",
+ status & DMA_DESCR_TX_RETRY_LIMIT ?
+ "retry limit reached, " : "",
+ status & DMA_DESCR_TX_UNDERRUN ? "underrun, " : "",
+ status & DMA_DESCR_TX_LATE_COLLISION ? "late collision, "
+ : "");
+#endif
+ }
+
+ debug_lev (9, "sending packet %d\n", length);
+ tx_descr->start_addr0 = cpu_to_le32((vuint32) packet);
+ tx_descr->start_addr1 = 0;
+ tx_descr->next_descr_addr0 = 0;
+ tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+ tx_descr->vlan_byte_count = cpu_to_le32(length);
+ tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OWNER |
+ DMA_DESCR_TX_CRC |
+ DMA_DESCR_TX_PAD |
+ DMA_DESCR_TX_SOF |
+ DMA_DESCR_TX_EOF);
+
+ invalidate_dcache_range((unsigned long)tx_descr,
+ (unsigned long)tx_descr +
+ sizeof(struct dma_descriptor));
+
+ invalidate_dcache_range((unsigned long)packet,
+ (unsigned long)packet + length);
+
+ reg_TX_QUEUE_0_PTR_LOW(base) = (u32) tx_descr;
+ reg_TX_QUEUE_0_PTR_HIGH(base) = TX_QUEUE_0_PTR_HIGH_VALID;
+
+ return length;
+}
+
+/*
+ * Check for received packets and send them up the protocal stack
+ */
+static int tsi108_eth_recv (struct eth_device *dev)
+{
+ struct dma_descriptor *rx_descr;
+ unsigned long base;
+ int length = 0;
+ unsigned long status;
+ volatile uchar *buffer;
+
+ base = dev->iobase;
+
+ /* make sure we see the changes made by the DMA engine */
+ invalidate_dcache_range ((unsigned long)rx_descr_array,
+ (unsigned long)rx_descr_array +
+ sizeof(rx_descr_array));
+
+ /* process all of the received packets */
+ rx_descr = rx_descr_current;
+ while ((rx_descr->config_status & cpu_to_le32(DMA_DESCR_RX_OWNER)) == 0) {
+ /* check for error */
+ status = le32_to_cpu(rx_descr->config_status);
+ if (status & DMA_DESCR_RX_BAD_FRAME) {
+#ifdef RX_PRINT_ERRORS
+ printf ("RX packet error: 0x%08x\n %s%s%s%s%s%s\n",
+ status,
+ status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, "
+ : "",
+ status & DMA_DESCR_RX_SHORT_FRAME ? "too short, "
+ : "",
+ status & DMA_DESCR_RX_BAD_FRAME ? "bad frame, " :
+ "",
+ status & DMA_DESCR_RX_OVERRUN ? "overrun, " : "",
+ status & DMA_DESCR_RX_MAX_FRAME_LEN ?
+ "max length, " : "",
+ status & DMA_DESCR_RX_CRC_ERROR ? "CRC error, " :
+ "");
+#endif
+ } else {
+ length =
+ le32_to_cpu(rx_descr->vlan_byte_count) & 0xFFFF;
+
+ /*** process packet ***/
+ buffer =
+ (volatile uchar
+ *)(le32_to_cpu (rx_descr->start_addr0));
+ NetReceive (buffer, length);
+
+ invalidate_dcache_range ((unsigned long)buffer,
+ (unsigned long)buffer +
+ RX_BUFFER_SIZE);
+ }
+ /* Give this buffer back to the DMA engine */
+ rx_descr->vlan_byte_count = 0;
+ rx_descr->config_status = cpu_to_le32 ((RX_BUFFER_SIZE << 16) |
+ DMA_DESCR_RX_OWNER);
+ /* move descriptor pointer forward */
+ rx_descr =
+ (struct dma_descriptor
+ *)(le32_to_cpu (rx_descr->next_descr_addr0));
+ if (rx_descr == 0)
+ rx_descr = &rx_descr_array[0];
+ }
+ /* remember where we are for next time */
+ rx_descr_current = rx_descr;
+
+ /* If the DMA engine has reached the end of the queue
+ * start over at the begining */
+ if (reg_RX_EXTENDED_STATUS(base) & RX_EXTENDED_STATUS_EOQ_0) {
+
+ reg_RX_EXTENDED_STATUS(base) = RX_EXTENDED_STATUS_EOQ_0;
+ reg_RX_QUEUE_0_PTR_LOW(base) = (u32) & rx_descr_array[0];
+ reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID;
+ }
+
+ return length;
+}
+
+/*
+ * disable an ethernet interface
+ */
+static void tsi108_eth_halt (struct eth_device *dev)
+{
+ unsigned long base;
+
+ base = dev->iobase;
+
+ /* Put DMA/FIFO into reset state. */
+ reg_TX_CONFIG(base) = TX_CONFIG_RST;
+ reg_RX_CONFIG(base) = RX_CONFIG_RST;
+
+ /* Put MAC into reset state. */
+ reg_MAC_CONFIG_1(base) = MAC_CONFIG_1_SOFT_RESET;
+}
+
+#endif
diff --git a/drivers/tsi108_i2c.c b/drivers/tsi108_i2c.c
new file mode 100644
index 0000000..eb52cb6
--- /dev/null
+++ b/drivers/tsi108_i2c.c
@@ -0,0 +1,283 @@
+/*
+ * (C) Copyright 2004 Tundra Semiconductor Corp.
+ * Author: Alex Bounine
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+
+#ifdef CONFIG_TSI108_I2C
+#include <tsi108.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+
+#define I2C_DELAY 100000
+#undef DEBUG_I2C
+
+#ifdef DEBUG_I2C
+#define DPRINT(x) printf (x)
+#else
+#define DPRINT(x)
+#endif
+
+/* All functions assume that Tsi108 I2C block is the only master on the bus */
+/* I2C read helper function */
+
+static int i2c_read_byte (
+ uint i2c_chan, /* I2C channel number: 0 - main, 1 - SDC SPD */
+ uchar chip_addr,/* I2C device address on the bus */
+ uint byte_addr, /* Byte address within I2C device */
+ uchar * buffer /* pointer to data buffer */
+ )
+{
+ u32 temp;
+ u32 to_count = I2C_DELAY;
+ u32 op_status = TSI108_I2C_TIMEOUT_ERR;
+ u32 chan_offset = TSI108_I2C_OFFSET;
+
+ DPRINT (("I2C read_byte() %d 0x%02x 0x%02x\n",
+ i2c_chan, chip_addr, byte_addr));
+
+ if (0 != i2c_chan)
+ chan_offset = TSI108_I2C_SDRAM_OFFSET;
+
+ /* Check if I2C operation is in progress */
+ temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+
+ if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS |
+ I2C_CNTRL2_START))) {
+ /* Set device address and operation (read = 0) */
+ temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) |
+ ((chip_addr >> 3) & 0x0F);
+ *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
+ temp;
+
+ /* Issue the read command
+ * (at this moment all other parameters are 0
+ * (size = 1 byte, lane = 0)
+ */
+
+ *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
+ (I2C_CNTRL2_START);
+
+ /* Wait until operation completed */
+ do {
+ /* Read I2C operation status */
+ temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+
+ if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START))) {
+ if (0 == (temp &
+ (I2C_CNTRL2_I2C_CFGERR |
+ I2C_CNTRL2_I2C_TO_ERR))
+ ) {
+ op_status = TSI108_I2C_SUCCESS;
+
+ temp = *(u32 *) (CFG_TSI108_CSR_BASE +
+ chan_offset +
+ I2C_RD_DATA);
+
+ *buffer = (u8) (temp & 0xFF);
+ } else {
+ /* report HW error */
+ op_status = TSI108_I2C_IF_ERROR;
+
+ DPRINT (("I2C HW error reported: 0x%02x\n", temp));
+ }
+
+ break;
+ }
+ } while (to_count--);
+ } else {
+ op_status = TSI108_I2C_IF_BUSY;
+
+ DPRINT (("I2C Transaction start failed: 0x%02x\n", temp));
+ }
+
+ DPRINT (("I2C read_byte() status: 0x%02x\n", op_status));
+ return op_status;
+}
+
+/*
+ * I2C Read interface as defined in "include/i2c.h" :
+ * chip_addr: I2C chip address, range 0..127
+ * (to read from SPD channel EEPROM use (0xD0 ... 0xD7)
+ * NOTE: The bit 7 in the chip_addr serves as a channel select.
+ * This hack is for enabling "isdram" command on Tsi108 boards
+ * without changes to common code. Used for I2C reads only.
+ * byte_addr: Memory or register address within the chip
+ * alen: Number of bytes to use for addr (typically 1, 2 for larger
+ * memories, 0 for register type devices with only one
+ * register)
+ * buffer: Pointer to destination buffer for data to be read
+ * len: How many bytes to read
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+
+int i2c_read (uchar chip_addr, uint byte_addr, int alen,
+ uchar * buffer, int len)
+{
+ u32 op_status = TSI108_I2C_PARAM_ERR;
+ u32 i2c_if = 0;
+
+ /* Hack to support second (SPD) I2C controller (SPD EEPROM read only).*/
+ if (0xD0 == (chip_addr & ~0x07)) {
+ i2c_if = 1;
+ chip_addr &= 0x7F;
+ }
+ /* Check for valid I2C address */
+ if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) {
+ while (len--) {
+ op_status = i2c_read_byte(i2c_if, chip_addr, byte_addr++, buffer++);
+
+ if (TSI108_I2C_SUCCESS != op_status) {
+ DPRINT (("I2C read_byte() failed: 0x%02x (%d left)\n", op_status, len));
+
+ break;
+ }
+ }
+ }
+
+ DPRINT (("I2C read() status: 0x%02x\n", op_status));
+ return op_status;
+}
+
+/* I2C write helper function */
+
+static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
+ uint byte_addr, /* Byte address within I2C device */
+ uchar * buffer /* pointer to data buffer */
+ )
+{
+ u32 temp;
+ u32 to_count = I2C_DELAY;
+ u32 op_status = TSI108_I2C_TIMEOUT_ERR;
+
+ /* Check if I2C operation is in progress */
+ temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+
+ if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
+ /* Place data into the I2C Tx Register */
+ *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ I2C_TX_DATA) = (u32) * buffer;
+
+ /* Set device address and operation */
+ temp =
+ I2C_CNTRL1_I2CWRITE | (byte_addr << 16) |
+ ((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F);
+ *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ I2C_CNTRL1) = temp;
+
+ /* Issue the write command (at this moment all other parameters
+ * are 0 (size = 1 byte, lane = 0)
+ */
+
+ *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ I2C_CNTRL2) = (I2C_CNTRL2_START);
+
+ op_status = TSI108_I2C_TIMEOUT_ERR;
+
+ /* Wait until operation completed */
+ do {
+ /* Read I2C operation status */
+ temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+
+ if (0 == (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
+ if (0 == (temp &
+ (I2C_CNTRL2_I2C_CFGERR |
+ I2C_CNTRL2_I2C_TO_ERR))) {
+ op_status = TSI108_I2C_SUCCESS;
+ } else {
+ /* report detected HW error */
+ op_status = TSI108_I2C_IF_ERROR;
+
+ DPRINT (("I2C HW error reported: 0x%02x\n", temp));
+ }
+
+ break;
+ }
+
+ } while (to_count--);
+ } else {
+ op_status = TSI108_I2C_IF_BUSY;
+
+ DPRINT (("I2C Transaction start failed: 0x%02x\n", temp));
+ }
+
+ return op_status;
+}
+
+/*
+ * I2C Write interface as defined in "include/i2c.h" :
+ * chip_addr: I2C chip address, range 0..127
+ * byte_addr: Memory or register address within the chip
+ * alen: Number of bytes to use for addr (typically 1, 2 for larger
+ * memories, 0 for register type devices with only one
+ * register)
+ * buffer: Pointer to data to be written
+ * len: How many bytes to write
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+
+int i2c_write (uchar chip_addr, uint byte_addr, int alen, uchar * buffer,
+ int len)
+{
+ u32 op_status = TSI108_I2C_PARAM_ERR;
+
+ /* Check for valid I2C address */
+ if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) {
+ while (len--) {
+ op_status =
+ i2c_write_byte (chip_addr, byte_addr++, buffer++);
+
+ if (TSI108_I2C_SUCCESS != op_status) {
+ DPRINT (("I2C write_byte() failed: 0x%02x (%d left)\n", op_status, len));
+
+ break;
+ }
+ }
+ }
+
+ return op_status;
+}
+
+/*
+ * I2C interface function as defined in "include/i2c.h".
+ * Probe the given I2C chip address by reading single byte from offset 0.
+ * Returns 0 if a chip responded, not 0 on failure.
+ */
+
+int i2c_probe (uchar chip)
+{
+ u32 tmp;
+
+ /*
+ * Try to read the first location of the chip.
+ * The Tsi108 HW doesn't support sending just the chip address
+ * and checkong for an <ACK> back.
+ */
+ return i2c_read (chip, 0, 1, (char *)&tmp, 1);
+}
+
+#endif /* (CONFIG_COMMANDS & CFG_CMD_I2C) */
+#endif /* CONFIG_TSI108_I2C */
diff --git a/drivers/tsi108_pci.c b/drivers/tsi108_pci.c
new file mode 100644
index 0000000..9f606df
--- /dev/null
+++ b/drivers/tsi108_pci.c
@@ -0,0 +1,178 @@
+/*
+ * (C) Copyright 2004 Tundra Semiconductor Corp.
+ * Alex Bounine <alexandreb@tundra.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * PCI initialisation for the Tsi108 EMU board.
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_TSI108_PCI
+
+#include <common.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <tsi108.h>
+
+struct pci_controller local_hose;
+
+void tsi108_clear_pci_error (void)
+{
+ u32 err_stat, err_addr, pci_stat;
+
+ /*
+ * Quietly clear errors signalled as result of PCI/X configuration read
+ * requests.
+ */
+ /* Read PB Error Log Registers */
+ err_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ TSI108_PB_REG_OFFSET + PB_ERRCS);
+ err_addr = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ TSI108_PB_REG_OFFSET + PB_AERR);
+ if (err_stat & PB_ERRCS_ES) {
+ /* Clear PCI/X bus errors if applicable */
+ if ((err_addr & 0xFF000000) == CFG_PCI_CFG_BASE) {
+ /* Clear error flag */
+ *(u32 *) (CFG_TSI108_CSR_BASE +
+ TSI108_PB_REG_OFFSET + PB_ERRCS) =
+ PB_ERRCS_ES;
+
+ /* Clear read error reported in PB_ISR */
+ *(u32 *) (CFG_TSI108_CSR_BASE +
+ TSI108_PB_REG_OFFSET + PB_ISR) =
+ PB_ISR_PBS_RD_ERR;
+
+ /* Clear errors reported by PCI CSR (Normally Master Abort) */
+ pci_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ TSI108_PCI_REG_OFFSET +
+ PCI_CSR);
+ *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ TSI108_PCI_REG_OFFSET + PCI_CSR) =
+ pci_stat;
+
+ *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ TSI108_PCI_REG_OFFSET +
+ PCI_IRP_STAT) = PCI_IRP_STAT_P_CSR;
+ }
+ }
+
+ return;
+}
+
+unsigned int __get_pci_config_dword (u32 addr)
+{
+ unsigned int retval;
+
+ __asm__ __volatile__ (" lwbrx %0,0,%1\n"
+ "1: eieio\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: li %0,-1\n"
+ " b 2b\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 2\n"
+ " .long 1b,3b\n"
+ ".text":"=r"(retval):"r"(addr));
+
+ return (retval);
+}
+
+static int tsi108_read_config_dword (struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 * value)
+{
+ dev &= (CFG_PCI_CFG_SIZE - 1);
+ dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+ *value = __get_pci_config_dword(dev);
+ if (0xFFFFFFFF == *value)
+ tsi108_clear_pci_error ();
+ return 0;
+}
+
+static int tsi108_write_config_dword (struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 value)
+{
+ dev &= (CFG_PCI_CFG_SIZE - 1);
+ dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+
+ out_le32 ((volatile unsigned *)dev, value);
+
+ return 0;
+}
+
+void pci_init_board (void)
+{
+ struct pci_controller *hose = (struct pci_controller *)&local_hose;
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ pci_set_region (hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* PCI memory space */
+ pci_set_region (hose->regions + 1,
+ CFG_PCI_MEM_BUS,
+ CFG_PCI_MEM_PHYS, CFG_PCI_MEM_SIZE, PCI_REGION_MEM);
+
+ /* PCI I/O space */
+ pci_set_region (hose->regions + 2,
+ CFG_PCI_IO_BUS,
+ CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ pci_set_ops (hose,
+ pci_hose_read_config_byte_via_dword,
+ pci_hose_read_config_word_via_dword,
+ tsi108_read_config_dword,
+ pci_hose_write_config_byte_via_dword,
+ pci_hose_write_config_word_via_dword,
+ tsi108_write_config_dword);
+
+ pci_register_hose (hose);
+
+ hose->last_busno = pci_hose_scan (hose);
+
+ debug ("Done PCI initialization\n");
+ return;
+}
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_pci_setup (void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ p = (u32 *)ft_get_prop (blob, "/" OF_TSI "/pci@1000/bus-range", &len);
+ if (p != NULL) {
+ p[0] = local_hose.first_busno;
+ p[1] = local_hose.last_busno;
+ }
+
+}
+#endif
+
+#endif /* CONFIG_TSI108_PCI */
diff --git a/fs/jffs2/compr_zlib.c b/fs/jffs2/compr_zlib.c
index 1b35585..d88d0f8 100644
--- a/fs/jffs2/compr_zlib.c
+++ b/fs/jffs2/compr_zlib.c
@@ -45,7 +45,7 @@
long zlib_decompress(unsigned char *data_in, unsigned char *cpage_out,
__u32 srclen, __u32 destlen)
{
- return (decompress_block(cpage_out, data_in + 2, ldr_memcpy));
+ return (decompress_block(cpage_out, data_in + 2, (void *) ldr_memcpy));
}
diff --git a/include/74xx_7xx.h b/include/74xx_7xx.h
index 33e396a..ba73bae 100644
--- a/include/74xx_7xx.h
+++ b/include/74xx_7xx.h
@@ -111,7 +111,7 @@
CPU_750CX, CPU_750FX, CPU_750GX,
CPU_7400,
CPU_7410,
- CPU_7448,
+ CPU_7447A, CPU_7448,
CPU_7450, CPU_7455, CPU_7457,
CPU_UNKNOWN} cpu_t;
diff --git a/include/asm-avr32/arch-at32ap7000/clk.h b/include/asm-avr32/arch-at32ap7000/clk.h
new file mode 100644
index 0000000..7e20d97
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap7000/clk.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_ARCH_CLK_H__
+#define __ASM_AVR32_ARCH_CLK_H__
+
+#ifdef CONFIG_PLL
+#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
+#else
+#define MAIN_CLK_RATE (CFG_OSC0_HZ)
+#endif
+
+static inline unsigned long get_cpu_clk_rate(void)
+{
+ return MAIN_CLK_RATE >> CFG_CLKDIV_CPU;
+}
+static inline unsigned long get_hsb_clk_rate(void)
+{
+ return MAIN_CLK_RATE >> CFG_CLKDIV_HSB;
+}
+static inline unsigned long get_pba_clk_rate(void)
+{
+ return MAIN_CLK_RATE >> CFG_CLKDIV_PBA;
+}
+static inline unsigned long get_pbb_clk_rate(void)
+{
+ return MAIN_CLK_RATE >> CFG_CLKDIV_PBB;
+}
+
+/* Accessors for specific devices. More will be added as needed. */
+static inline unsigned long get_sdram_clk_rate(void)
+{
+ return get_hsb_clk_rate();
+}
+static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
+{
+ return get_pba_clk_rate();
+}
+static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
+{
+ return get_pbb_clk_rate();
+}
+static inline unsigned long get_macb_hclk_rate(unsigned int dev_id)
+{
+ return get_hsb_clk_rate();
+}
+static inline unsigned long get_mci_clk_rate(void)
+{
+ return get_pbb_clk_rate();
+}
+
+#endif /* __ASM_AVR32_ARCH_CLK_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/gpio.h b/include/asm-avr32/arch-at32ap7000/gpio.h
new file mode 100644
index 0000000..e4812d4
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap7000/gpio.h
@@ -0,0 +1,212 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_ARCH_GPIO_H__
+#define __ASM_AVR32_ARCH_GPIO_H__
+
+#include <asm/arch/memory-map.h>
+
+#define NR_GPIO_CONTROLLERS 5
+
+/*
+ * Pin numbers identifying specific GPIO pins on the chip.
+ */
+#define GPIO_PIOA_BASE (0)
+#define GPIO_PIN_PA0 (GPIO_PIOA_BASE + 0)
+#define GPIO_PIN_PA1 (GPIO_PIOA_BASE + 1)
+#define GPIO_PIN_PA2 (GPIO_PIOA_BASE + 2)
+#define GPIO_PIN_PA3 (GPIO_PIOA_BASE + 3)
+#define GPIO_PIN_PA4 (GPIO_PIOA_BASE + 4)
+#define GPIO_PIN_PA5 (GPIO_PIOA_BASE + 5)
+#define GPIO_PIN_PA6 (GPIO_PIOA_BASE + 6)
+#define GPIO_PIN_PA7 (GPIO_PIOA_BASE + 7)
+#define GPIO_PIN_PA8 (GPIO_PIOA_BASE + 8)
+#define GPIO_PIN_PA9 (GPIO_PIOA_BASE + 9)
+#define GPIO_PIN_PA10 (GPIO_PIOA_BASE + 10)
+#define GPIO_PIN_PA11 (GPIO_PIOA_BASE + 11)
+#define GPIO_PIN_PA12 (GPIO_PIOA_BASE + 12)
+#define GPIO_PIN_PA13 (GPIO_PIOA_BASE + 13)
+#define GPIO_PIN_PA14 (GPIO_PIOA_BASE + 14)
+#define GPIO_PIN_PA15 (GPIO_PIOA_BASE + 15)
+#define GPIO_PIN_PA16 (GPIO_PIOA_BASE + 16)
+#define GPIO_PIN_PA17 (GPIO_PIOA_BASE + 17)
+#define GPIO_PIN_PA18 (GPIO_PIOA_BASE + 18)
+#define GPIO_PIN_PA19 (GPIO_PIOA_BASE + 19)
+#define GPIO_PIN_PA20 (GPIO_PIOA_BASE + 20)
+#define GPIO_PIN_PA21 (GPIO_PIOA_BASE + 21)
+#define GPIO_PIN_PA22 (GPIO_PIOA_BASE + 22)
+#define GPIO_PIN_PA23 (GPIO_PIOA_BASE + 23)
+#define GPIO_PIN_PA24 (GPIO_PIOA_BASE + 24)
+#define GPIO_PIN_PA25 (GPIO_PIOA_BASE + 25)
+#define GPIO_PIN_PA26 (GPIO_PIOA_BASE + 26)
+#define GPIO_PIN_PA27 (GPIO_PIOA_BASE + 27)
+#define GPIO_PIN_PA28 (GPIO_PIOA_BASE + 28)
+#define GPIO_PIN_PA29 (GPIO_PIOA_BASE + 29)
+#define GPIO_PIN_PA30 (GPIO_PIOA_BASE + 30)
+#define GPIO_PIN_PA31 (GPIO_PIOA_BASE + 31)
+
+#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
+#define GPIO_PIN_PB0 (GPIO_PIOB_BASE + 0)
+#define GPIO_PIN_PB1 (GPIO_PIOB_BASE + 1)
+#define GPIO_PIN_PB2 (GPIO_PIOB_BASE + 2)
+#define GPIO_PIN_PB3 (GPIO_PIOB_BASE + 3)
+#define GPIO_PIN_PB4 (GPIO_PIOB_BASE + 4)
+#define GPIO_PIN_PB5 (GPIO_PIOB_BASE + 5)
+#define GPIO_PIN_PB6 (GPIO_PIOB_BASE + 6)
+#define GPIO_PIN_PB7 (GPIO_PIOB_BASE + 7)
+#define GPIO_PIN_PB8 (GPIO_PIOB_BASE + 8)
+#define GPIO_PIN_PB9 (GPIO_PIOB_BASE + 9)
+#define GPIO_PIN_PB10 (GPIO_PIOB_BASE + 10)
+#define GPIO_PIN_PB11 (GPIO_PIOB_BASE + 11)
+#define GPIO_PIN_PB12 (GPIO_PIOB_BASE + 12)
+#define GPIO_PIN_PB13 (GPIO_PIOB_BASE + 13)
+#define GPIO_PIN_PB14 (GPIO_PIOB_BASE + 14)
+#define GPIO_PIN_PB15 (GPIO_PIOB_BASE + 15)
+#define GPIO_PIN_PB16 (GPIO_PIOB_BASE + 16)
+#define GPIO_PIN_PB17 (GPIO_PIOB_BASE + 17)
+#define GPIO_PIN_PB18 (GPIO_PIOB_BASE + 18)
+#define GPIO_PIN_PB19 (GPIO_PIOB_BASE + 19)
+#define GPIO_PIN_PB20 (GPIO_PIOB_BASE + 20)
+#define GPIO_PIN_PB21 (GPIO_PIOB_BASE + 21)
+#define GPIO_PIN_PB22 (GPIO_PIOB_BASE + 22)
+#define GPIO_PIN_PB23 (GPIO_PIOB_BASE + 23)
+#define GPIO_PIN_PB24 (GPIO_PIOB_BASE + 24)
+#define GPIO_PIN_PB25 (GPIO_PIOB_BASE + 25)
+#define GPIO_PIN_PB26 (GPIO_PIOB_BASE + 26)
+#define GPIO_PIN_PB27 (GPIO_PIOB_BASE + 27)
+#define GPIO_PIN_PB28 (GPIO_PIOB_BASE + 28)
+#define GPIO_PIN_PB29 (GPIO_PIOB_BASE + 29)
+#define GPIO_PIN_PB30 (GPIO_PIOB_BASE + 30)
+
+#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
+#define GPIO_PIN_PC0 (GPIO_PIOC_BASE + 0)
+#define GPIO_PIN_PC1 (GPIO_PIOC_BASE + 1)
+#define GPIO_PIN_PC2 (GPIO_PIOC_BASE + 2)
+#define GPIO_PIN_PC3 (GPIO_PIOC_BASE + 3)
+#define GPIO_PIN_PC4 (GPIO_PIOC_BASE + 4)
+#define GPIO_PIN_PC5 (GPIO_PIOC_BASE + 5)
+#define GPIO_PIN_PC6 (GPIO_PIOC_BASE + 6)
+#define GPIO_PIN_PC7 (GPIO_PIOC_BASE + 7)
+#define GPIO_PIN_PC8 (GPIO_PIOC_BASE + 8)
+#define GPIO_PIN_PC9 (GPIO_PIOC_BASE + 9)
+#define GPIO_PIN_PC10 (GPIO_PIOC_BASE + 10)
+#define GPIO_PIN_PC11 (GPIO_PIOC_BASE + 11)
+#define GPIO_PIN_PC12 (GPIO_PIOC_BASE + 12)
+#define GPIO_PIN_PC13 (GPIO_PIOC_BASE + 13)
+#define GPIO_PIN_PC14 (GPIO_PIOC_BASE + 14)
+#define GPIO_PIN_PC15 (GPIO_PIOC_BASE + 15)
+#define GPIO_PIN_PC16 (GPIO_PIOC_BASE + 16)
+#define GPIO_PIN_PC17 (GPIO_PIOC_BASE + 17)
+#define GPIO_PIN_PC18 (GPIO_PIOC_BASE + 18)
+#define GPIO_PIN_PC19 (GPIO_PIOC_BASE + 19)
+#define GPIO_PIN_PC20 (GPIO_PIOC_BASE + 20)
+#define GPIO_PIN_PC21 (GPIO_PIOC_BASE + 21)
+#define GPIO_PIN_PC22 (GPIO_PIOC_BASE + 22)
+#define GPIO_PIN_PC23 (GPIO_PIOC_BASE + 23)
+#define GPIO_PIN_PC24 (GPIO_PIOC_BASE + 24)
+#define GPIO_PIN_PC25 (GPIO_PIOC_BASE + 25)
+#define GPIO_PIN_PC26 (GPIO_PIOC_BASE + 26)
+#define GPIO_PIN_PC27 (GPIO_PIOC_BASE + 27)
+#define GPIO_PIN_PC28 (GPIO_PIOC_BASE + 28)
+#define GPIO_PIN_PC29 (GPIO_PIOC_BASE + 29)
+#define GPIO_PIN_PC30 (GPIO_PIOC_BASE + 30)
+#define GPIO_PIN_PC31 (GPIO_PIOC_BASE + 31)
+
+#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
+#define GPIO_PIN_PD0 (GPIO_PIOD_BASE + 0)
+#define GPIO_PIN_PD1 (GPIO_PIOD_BASE + 1)
+#define GPIO_PIN_PD2 (GPIO_PIOD_BASE + 2)
+#define GPIO_PIN_PD3 (GPIO_PIOD_BASE + 3)
+#define GPIO_PIN_PD4 (GPIO_PIOD_BASE + 4)
+#define GPIO_PIN_PD5 (GPIO_PIOD_BASE + 5)
+#define GPIO_PIN_PD6 (GPIO_PIOD_BASE + 6)
+#define GPIO_PIN_PD7 (GPIO_PIOD_BASE + 7)
+#define GPIO_PIN_PD8 (GPIO_PIOD_BASE + 8)
+#define GPIO_PIN_PD9 (GPIO_PIOD_BASE + 9)
+#define GPIO_PIN_PD10 (GPIO_PIOD_BASE + 10)
+#define GPIO_PIN_PD11 (GPIO_PIOD_BASE + 11)
+#define GPIO_PIN_PD12 (GPIO_PIOD_BASE + 12)
+#define GPIO_PIN_PD13 (GPIO_PIOD_BASE + 13)
+#define GPIO_PIN_PD14 (GPIO_PIOD_BASE + 14)
+#define GPIO_PIN_PD15 (GPIO_PIOD_BASE + 15)
+#define GPIO_PIN_PD16 (GPIO_PIOD_BASE + 16)
+#define GPIO_PIN_PD17 (GPIO_PIOD_BASE + 17)
+
+#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
+#define GPIO_PIN_PE0 (GPIO_PIOE_BASE + 0)
+#define GPIO_PIN_PE1 (GPIO_PIOE_BASE + 1)
+#define GPIO_PIN_PE2 (GPIO_PIOE_BASE + 2)
+#define GPIO_PIN_PE3 (GPIO_PIOE_BASE + 3)
+#define GPIO_PIN_PE4 (GPIO_PIOE_BASE + 4)
+#define GPIO_PIN_PE5 (GPIO_PIOE_BASE + 5)
+#define GPIO_PIN_PE6 (GPIO_PIOE_BASE + 6)
+#define GPIO_PIN_PE7 (GPIO_PIOE_BASE + 7)
+#define GPIO_PIN_PE8 (GPIO_PIOE_BASE + 8)
+#define GPIO_PIN_PE9 (GPIO_PIOE_BASE + 9)
+#define GPIO_PIN_PE10 (GPIO_PIOE_BASE + 10)
+#define GPIO_PIN_PE11 (GPIO_PIOE_BASE + 11)
+#define GPIO_PIN_PE12 (GPIO_PIOE_BASE + 12)
+#define GPIO_PIN_PE13 (GPIO_PIOE_BASE + 13)
+#define GPIO_PIN_PE14 (GPIO_PIOE_BASE + 14)
+#define GPIO_PIN_PE15 (GPIO_PIOE_BASE + 15)
+#define GPIO_PIN_PE16 (GPIO_PIOE_BASE + 16)
+#define GPIO_PIN_PE17 (GPIO_PIOE_BASE + 17)
+#define GPIO_PIN_PE18 (GPIO_PIOE_BASE + 18)
+#define GPIO_PIN_PE19 (GPIO_PIOE_BASE + 19)
+#define GPIO_PIN_PE20 (GPIO_PIOE_BASE + 20)
+#define GPIO_PIN_PE21 (GPIO_PIOE_BASE + 21)
+#define GPIO_PIN_PE22 (GPIO_PIOE_BASE + 22)
+#define GPIO_PIN_PE23 (GPIO_PIOE_BASE + 23)
+#define GPIO_PIN_PE24 (GPIO_PIOE_BASE + 24)
+#define GPIO_PIN_PE25 (GPIO_PIOE_BASE + 25)
+#define GPIO_PIN_PE26 (GPIO_PIOE_BASE + 26)
+
+static inline void *gpio_pin_to_addr(unsigned int pin)
+{
+ switch (pin >> 5) {
+ case 0:
+ return (void *)PIOA_BASE;
+ case 1:
+ return (void *)PIOB_BASE;
+ case 2:
+ return (void *)PIOC_BASE;
+ case 3:
+ return (void *)PIOD_BASE;
+ case 4:
+ return (void *)PIOE_BASE;
+ default:
+ return NULL;
+ }
+}
+
+void gpio_select_periph_A(unsigned int pin, int use_pullup);
+void gpio_select_periph_B(unsigned int pin, int use_pullup);
+
+void gpio_enable_ebi(void);
+void gpio_enable_usart0(void);
+void gpio_enable_usart1(void);
+void gpio_enable_usart2(void);
+void gpio_enable_usart3(void);
+void gpio_enable_macb0(void);
+void gpio_enable_macb1(void);
+void gpio_enable_mmci(void);
+
+#endif /* __ASM_AVR32_ARCH_GPIO_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/hmatrix2.h b/include/asm-avr32/arch-at32ap7000/hmatrix2.h
index e6df4b7..b0e787a 100644
--- a/include/asm-avr32/arch-at32ap7000/hmatrix2.h
+++ b/include/asm-avr32/arch-at32ap7000/hmatrix2.h
@@ -224,9 +224,9 @@
| HMATRIX2_BF(name,value))
/* Register access macros */
-#define hmatrix2_readl(port,reg) \
- readl((port)->regs + HMATRIX2_##reg)
-#define hmatrix2_writel(port,reg,value) \
- writel((value), (port)->regs + HMATRIX2_##reg)
+#define hmatrix2_readl(reg) \
+ readl((void *)HMATRIX_BASE + HMATRIX2_##reg)
+#define hmatrix2_writel(reg,value) \
+ writel((value), (void *)HMATRIX_BASE + HMATRIX2_##reg)
#endif /* __ASM_AVR32_HMATRIX2_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/memory-map.h b/include/asm-avr32/arch-at32ap7000/memory-map.h
index 8ffe851..5513e88 100644
--- a/include/asm-avr32/arch-at32ap7000/memory-map.h
+++ b/include/asm-avr32/arch-at32ap7000/memory-map.h
@@ -19,43 +19,48 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-#ifndef __ASM_AVR32_PART_MEMORY_MAP_H__
-#define __ASM_AVR32_PART_MEMORY_MAP_H__
+#ifndef __AT32AP7000_MEMORY_MAP_H__
+#define __AT32AP7000_MEMORY_MAP_H__
-#define AUDIOC_BASE 0xFFF02800
-#define DAC_BASE 0xFFF02000
-#define DMAC_BASE 0xFF200000
-#define ECC_BASE 0xFFF03C00
-#define HISI_BASE 0xFFF02C00
-#define HMATRIX_BASE 0xFFF00800
-#define HSDRAMC_BASE 0xFFF03800
-#define HSMC_BASE 0xFFF03400
-#define LCDC_BASE 0xFF000000
-#define MACB0_BASE 0xFFF01800
-#define MACB1_BASE 0xFFF01C00
-#define MMCI_BASE 0xFFF02400
-#define PIOA_BASE 0xFFE02800
-#define PIOB_BASE 0xFFE02C00
-#define PIOC_BASE 0xFFE03000
-#define PIOD_BASE 0xFFE03400
-#define PIOE_BASE 0xFFE03800
-#define PSIF_BASE 0xFFE03C00
-#define PWM_BASE 0xFFF01400
-#define SM_BASE 0xFFF00000
-#define INTC_BASE 0XFFF00400
-#define SPI0_BASE 0xFFE00000
-#define SPI1_BASE 0xFFE00400
-#define SSC0_BASE 0xFFE01C00
-#define SSC1_BASE 0xFFE02000
-#define SSC2_BASE 0xFFE02400
-#define TIMER0_BASE 0xFFF00C00
-#define TIMER1_BASE 0xFFF01000
-#define TWI_BASE 0xFFE00800
-#define USART0_BASE 0xFFE00C00
-#define USART1_BASE 0xFFE01000
-#define USART2_BASE 0xFFE01400
-#define USART3_BASE 0xFFE01800
-#define USB_FIFO 0xFF300000
-#define USB_BASE 0xFFF03000
+/* Devices on the High Speed Bus (HSB) */
+#define LCDC_BASE 0xFF000000
+#define DMAC_BASE 0xFF200000
+#define USB_FIFO 0xFF300000
-#endif /* __ASM_AVR32_PART_MEMORY_MAP_H__ */
+/* Devices on Peripheral Bus A (PBA) */
+#define SPI0_BASE 0xFFE00000
+#define SPI1_BASE 0xFFE00400
+#define TWI_BASE 0xFFE00800
+#define USART0_BASE 0xFFE00C00
+#define USART1_BASE 0xFFE01000
+#define USART2_BASE 0xFFE01400
+#define USART3_BASE 0xFFE01800
+#define SSC0_BASE 0xFFE01C00
+#define SSC1_BASE 0xFFE02000
+#define SSC2_BASE 0xFFE02400
+#define PIOA_BASE 0xFFE02800
+#define PIOB_BASE 0xFFE02C00
+#define PIOC_BASE 0xFFE03000
+#define PIOD_BASE 0xFFE03400
+#define PIOE_BASE 0xFFE03800
+#define PSIF_BASE 0xFFE03C00
+
+/* Devices on Peripheral Bus B (PBB) */
+#define SM_BASE 0xFFF00000
+#define INTC_BASE 0xFFF00400
+#define HMATRIX_BASE 0xFFF00800
+#define TIMER0_BASE 0xFFF00C00
+#define TIMER1_BASE 0xFFF01000
+#define PWM_BASE 0xFFF01400
+#define MACB0_BASE 0xFFF01800
+#define MACB1_BASE 0xFFF01C00
+#define DAC_BASE 0xFFF02000
+#define MMCI_BASE 0xFFF02400
+#define AUDIOC_BASE 0xFFF02800
+#define HISI_BASE 0xFFF02C00
+#define USB_BASE 0xFFF03000
+#define HSMC_BASE 0xFFF03400
+#define HSDRAMC_BASE 0xFFF03800
+#define ECC_BASE 0xFFF03C00
+
+#endif /* __AT32AP7000_MEMORY_MAP_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/mmc.h b/include/asm-avr32/arch-at32ap7000/mmc.h
new file mode 100644
index 0000000..fcfbbb3
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap7000/mmc.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_MMC_H
+#define __ASM_AVR32_MMC_H
+
+struct mmc_cid {
+ unsigned long psn;
+ unsigned short oid;
+ unsigned char mid;
+ unsigned char prv;
+ unsigned char mdt;
+ char pnm[7];
+};
+
+struct mmc_csd
+{
+ u8 csd_structure:2,
+ spec_vers:4,
+ rsvd1:2;
+ u8 taac;
+ u8 nsac;
+ u8 tran_speed;
+ u16 ccc:12,
+ read_bl_len:4;
+ u64 read_bl_partial:1,
+ write_blk_misalign:1,
+ read_blk_misalign:1,
+ dsr_imp:1,
+ rsvd2:2,
+ c_size:12,
+ vdd_r_curr_min:3,
+ vdd_r_curr_max:3,
+ vdd_w_curr_min:3,
+ vdd_w_curr_max:3,
+ c_size_mult:3,
+ sector_size:5,
+ erase_grp_size:5,
+ wp_grp_size:5,
+ wp_grp_enable:1,
+ default_ecc:2,
+ r2w_factor:3,
+ write_bl_len:4,
+ write_bl_partial:1,
+ rsvd3:5;
+ u8 file_format_grp:1,
+ copy:1,
+ perm_write_protect:1,
+ tmp_write_protect:1,
+ file_format:2,
+ ecc:2;
+ u8 crc:7;
+ u8 one:1;
+};
+
+/* MMC Command numbers */
+#define MMC_CMD_GO_IDLE_STATE 0
+#define MMC_CMD_SEND_OP_COND 1
+#define MMC_CMD_ALL_SEND_CID 2
+#define MMC_CMD_SET_RELATIVE_ADDR 3
+#define MMC_CMD_SD_SEND_RELATIVE_ADDR 3
+#define MMC_CMD_SET_DSR 4
+#define MMC_CMD_SELECT_CARD 7
+#define MMC_CMD_SEND_CSD 9
+#define MMC_CMD_SEND_CID 10
+#define MMC_CMD_SEND_STATUS 13
+#define MMC_CMD_SET_BLOCKLEN 16
+#define MMC_CMD_READ_SINGLE_BLOCK 17
+#define MMC_CMD_READ_MULTIPLE_BLOCK 18
+#define MMC_CMD_WRITE_BLOCK 24
+#define MMC_CMD_APP_CMD 55
+
+#define MMC_ACMD_SD_SEND_OP_COND 41
+
+#define R1_ILLEGAL_COMMAND (1 << 22)
+#define R1_APP_CMD (1 << 5)
+
+#endif /* __ASM_AVR32_MMC_H */
diff --git a/include/asm-avr32/arch-at32ap7000/platform.h b/include/asm-avr32/arch-at32ap7000/platform.h
deleted file mode 100644
index 7590501..0000000
--- a/include/asm-avr32/arch-at32ap7000/platform.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _ASM_AVR32_ARCH_PM_H
-#define _ASM_AVR32_ARCH_PM_H
-
-#include <config.h>
-
-enum clock_domain_id {
- CLOCK_CPU,
- CLOCK_HSB,
- CLOCK_PBA,
- CLOCK_PBB,
- NR_CLOCK_DOMAINS,
-};
-
-enum resource_type {
- RESOURCE_GPIO,
- RESOURCE_CLOCK,
-};
-
-enum gpio_func {
- GPIO_FUNC_GPIO,
- GPIO_FUNC_A,
- GPIO_FUNC_B,
-};
-
-enum device_id {
- DEVICE_HEBI,
- DEVICE_PBA_BRIDGE,
- DEVICE_PBB_BRIDGE,
- DEVICE_HRAMC,
- /* GPIO controllers must be kept together */
- DEVICE_PIOA,
- DEVICE_PIOB,
- DEVICE_PIOC,
- DEVICE_PIOD,
- DEVICE_PIOE,
- DEVICE_SM,
- DEVICE_INTC,
- DEVICE_HMATRIX,
-#if defined(CFG_HPDC)
- DEVICE_HPDC,
-#endif
-#if defined(CFG_MACB0)
- DEVICE_MACB0,
-#endif
-#if defined(CFG_MACB1)
- DEVICE_MACB1,
-#endif
-#if defined(CFG_LCDC)
- DEVICE_LCDC,
-#endif
-#if defined(CFG_USART0)
- DEVICE_USART0,
-#endif
-#if defined(CFG_USART1)
- DEVICE_USART1,
-#endif
-#if defined(CFG_USART2)
- DEVICE_USART2,
-#endif
-#if defined(CFG_USART3)
- DEVICE_USART3,
-#endif
-#if defined(CFG_MMCI)
- DEVICE_MMCI,
-#endif
-#if defined(CFG_DMAC)
- DEVICE_DMAC,
-#endif
- NR_DEVICES,
- NO_DEVICE = -1,
-};
-
-struct resource {
- enum resource_type type;
- union {
- struct {
- unsigned long base;
- } iomem;
- struct {
- unsigned char nr_pins;
- enum device_id gpio_dev;
- enum gpio_func func;
- unsigned short start;
- } gpio;
- struct {
- enum clock_domain_id id;
- unsigned char index;
- } clock;
- } u;
-};
-
-struct device {
- void *regs;
- unsigned int nr_resources;
- const struct resource *resource;
-};
-
-struct clock_domain {
- unsigned short reg;
- enum clock_domain_id id;
- enum device_id bridge;
-};
-
-extern const struct device chip_device[NR_DEVICES];
-extern const struct clock_domain chip_clock[NR_CLOCK_DOMAINS];
-
-/**
- * Set up PIO, clock management and I/O memory for a device.
- */
-const struct device *get_device(enum device_id devid);
-void put_device(const struct device *dev);
-
-int gpio_set_func(enum device_id gpio_devid, unsigned int start,
- unsigned int nr_pins, enum gpio_func func);
-void gpio_free(enum device_id gpio_devid, unsigned int start,
- unsigned int nr_pins);
-
-void pm_init(void);
-int pm_enable_clock(enum clock_domain_id id, unsigned int index);
-void pm_disable_clock(enum clock_domain_id id, unsigned int index);
-unsigned long pm_get_clock_freq(enum clock_domain_id domain);
-
-void cpu_enable_sdram(void);
-
-#endif /* _ASM_AVR32_ARCH_PM_H */
diff --git a/include/asm-avr32/global_data.h b/include/asm-avr32/global_data.h
index 01d836c..681c514 100644
--- a/include/asm-avr32/global_data.h
+++ b/include/asm-avr32/global_data.h
@@ -35,10 +35,8 @@
typedef struct global_data {
bd_t *bd;
unsigned long flags;
- const struct device *console_uart;
- const struct device *sm;
unsigned long baudrate;
- unsigned long sdram_size;
+ unsigned long stack_end; /* highest stack address */
unsigned long have_console; /* serial_init() was called */
unsigned long reloc_off; /* Relocation Offset */
unsigned long env_addr; /* Address of env struct */
diff --git a/include/asm-avr32/initcalls.h b/include/asm-avr32/initcalls.h
index 7ba25cd..583e5dc 100644
--- a/include/asm-avr32/initcalls.h
+++ b/include/asm-avr32/initcalls.h
@@ -26,8 +26,6 @@
extern int cpu_init(void);
extern int timer_init(void);
-extern void board_init_memories(void);
-extern void board_init_pio(void);
extern void board_init_info(void);
#endif /* __ASM_AVR32_INITCALLS_H__ */
diff --git a/include/asm-blackfin/arch-bf533/bf533_serial.h b/include/asm-blackfin/arch-bf533/bf533_serial.h
index ce58863..65749ee 100644
--- a/include/asm-blackfin/arch-bf533/bf533_serial.h
+++ b/include/asm-blackfin/arch-bf533/bf533_serial.h
@@ -1,7 +1,7 @@
/*
* U-boot bf533_serial.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BF533_SERIAL_H_
diff --git a/include/asm-blackfin/arch-bf533/bf5xx_rtc.h b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h
index bc09922..f4440a8 100644
--- a/include/asm-blackfin/arch-bf533/bf5xx_rtc.h
+++ b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h
@@ -1,7 +1,7 @@
/*
* U-boot - bf533_rtc.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BF533_RTC_H_
diff --git a/include/asm-blackfin/arch-bf533/cplbtab.h b/include/asm-blackfin/arch-bf533/cplbtab.h
deleted file mode 100644
index 89f0325..0000000
--- a/include/asm-blackfin/arch-bf533/cplbtab.h
+++ /dev/null
@@ -1,482 +0,0 @@
-/*This file is subject to the terms and conditions of the GNU General Public
- * License.
- *
- * Blackfin BF533/2.6 support : LG Soft India
- * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd
- * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's
- * shouldn't be victimized. cplbmgr.S search logic is corrected
- * to findout the appropriate victim.
- * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC
- * : LG Soft India
- */
-#include <config.h>
-
-#ifndef __ARCH_BFINNOMMU_CPLBTAB_H
-#define __ARCH_BFINNOMMU_CPLBTAB_H
-
-/*************************************************************************
- * ICPLB TABLE
- *************************************************************************/
-
-.data
-/* This table is configurable */
- .align 4;
-
-/* Data Attibutes*/
-
-#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID)
-#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID)
-
-/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
-
-#define ANOMALY_05000158 0x200
-#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */
-#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
-
-#else /*Write Through */
-#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
-#endif
-
-.align 4;
-.global _ipdt_table _ipdt_table:.byte4 0x00000000;
-.byte4(SDRAM_IKERNEL); /*SDRAM_Page0 */
-.byte4 0x00400000;
-.byte4(SDRAM_IKERNEL); /*SDRAM_Page1 */
-.byte4 0x00800000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page2 */
-.byte4 0x00C00000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page3 */
-.byte4 0x01000000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page4 */
-.byte4 0x01400000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page5 */
-.byte4 0x01800000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page6 */
-.byte4 0x01C00000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page7 */
-#ifndef CONFIG_EZKIT /*STAMP Memory regions */
-.byte4 0x02000000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page8 */
-.byte4 0x02400000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page9 */
-.byte4 0x02800000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page10 */
-.byte4 0x02C00000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page11 */
-.byte4 0x03000000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page12 */
-.byte4 0x03400000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page13 */
-.byte4 0x03800000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page14 */
-.byte4 0x03C00000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page15 */
-#endif
-.byte4 0x20000000;
-.byte4(SDRAM_EBIU); /* Async Memory Bank 2 (Secnd) */
-
-#ifdef CONFIG_STAMP
-.byte4 0x04000000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x04400000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x04800000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x04C00000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x05000000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x05400000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x05800000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x05C00000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x06000000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page25 */
-.byte4 0x06400000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page26 */
-.byte4 0x06800000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page27 */
-.byte4 0x06C00000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page28 */
-.byte4 0x07000000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page29 */
-.byte4 0x07400000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page30 */
-.byte4 0x07800000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page31 */
-.byte4 0x07C00000;
-.byte4(SDRAM_IKERNEL); /*SDRAM_Page32 */
-#endif
-.byte4 0xffffffff; /* end of section - termination */
-
-/**********************************************************************
- * PAGE DESCRIPTOR TABLE
- *
- **********************************************************************/
-
-/* Till here we are discussing about the static memory management model.
- * However, the operating envoronments commonly define more CPLB
- * descriptors to cover the entire addressable memory than will fit into
- * the available on-chip 16 CPLB MMRs. When this happens, the below table
- * will be used which will hold all the potentially required CPLB descriptors
- *
- * This is how Page descriptor Table is implemented in uClinux/Blackfin.
- */
-.global _dpdt_table _dpdt_table:.byte4 0x00000000;
-.byte4(SDRAM_DKERNEL); /*SDRAM_Page0 */
-.byte4 0x00400000;
-.byte4(SDRAM_DKERNEL); /*SDRAM_Page1 */
-.byte4 0x00800000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page2 */
-.byte4 0x00C00000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page3 */
-.byte4 0x01000000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page4 */
-.byte4 0x01400000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page5 */
-.byte4 0x01800000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page6 */
-.byte4 0x01C00000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page7 */
-
-#ifndef CONFIG_EZKIT
-.byte4 0x02000000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page8 */
-.byte4 0x02400000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page9 */
-.byte4 0x02800000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page10 */
-.byte4 0x02C00000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page11 */
-.byte4 0x03000000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page12 */
-.byte4 0x03400000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page13 */
-.byte4 0x03800000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page14 */
-.byte4 0x03C00000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page15 */
-#endif
-
-#ifdef CONFIG_STAMP
-.byte4 0x04000000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x04400000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x04800000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x04C00000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x05000000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x05400000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x05800000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x05C00000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x06000000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page25 */
-.byte4 0x06400000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page26 */
-.byte4 0x06800000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page27 */
-.byte4 0x06C00000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page28 */
-.byte4 0x07000000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page29 */
-.byte4 0x07400000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page30 */
-.byte4 0x07800000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page31 */
-.byte4 0x07C00000;
-.byte4(SDRAM_DKERNEL); /*SDRAM_Page32 */
-#endif
-
-.byte4 0x20000000;
-.byte4(SDRAM_EBIU); /* Async Memory Bank 0 (Prim A) */
-
-#if (BFIN_CPU == ADSP_BF533)
-.byte4 0xFF800000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF801000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF802000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF803000;
-.byte4(L1_DMEMORY);
-#endif
-.byte4 0xFF804000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF805000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF806000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF807000;
-.byte4(L1_DMEMORY);
-#if (BFIN_CPU == ADSP_BF533)
-.byte4 0xFF900000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF901000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF902000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF903000;
-.byte4(L1_DMEMORY);
-#endif
-#if ((BFIN_CPU == ADSP_BF532) || (BFIN_CPU == ADSP_BF533))
-.byte4 0xFF904000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF905000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF906000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF907000;
-.byte4(L1_DMEMORY);
-#endif
-.byte4 0xFFB00000;
-.byte4(L1_DMEMORY);
-
-.byte4 0xffffffff; /*end of section - termination */
-
-#ifdef CONFIG_CPLB_INFO
-.global _ipdt_swapcount_table; /* swapin count first, then swapout count */
-_ipdt_swapcount_table:
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 10 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 20 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 30 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 40 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 50 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 60 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 70 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 80 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 90 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 100 */
-
-.global _dpdt_swapcount_table; /* swapin count first, then swapout count */
-_dpdt_swapcount_table:
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 10 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 20 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 30 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 40 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 50 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 60 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 70 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 80 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 80 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 100 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 110 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 120 */
-#endif
-
-#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/
diff --git a/include/asm-blackfin/arch-bf533/irq.h b/include/asm-blackfin/arch-bf533/irq.h
index 9c5230d..3235745 100644
--- a/include/asm-blackfin/arch-bf533/irq.h
+++ b/include/asm-blackfin/arch-bf533/irq.h
@@ -1,7 +1,7 @@
/*
* U-boot bf533_irq.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c
@@ -33,8 +33,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BF533_IRQ_H_
diff --git a/include/asm-blackfin/arch-bf537/bf537_serial.h b/include/asm-blackfin/arch-bf537/bf537_serial.h
index 1610411..64088f2 100644
--- a/include/asm-blackfin/arch-bf537/bf537_serial.h
+++ b/include/asm-blackfin/arch-bf537/bf537_serial.h
@@ -1,7 +1,7 @@
/*
* U-boot bf537_serial.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BF537_SERIAL_H_
diff --git a/include/asm-blackfin/arch-bf537/bf5xx_rtc.h b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h
index 0043e42..db5cc6f 100644
--- a/include/asm-blackfin/arch-bf537/bf5xx_rtc.h
+++ b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h
@@ -1,7 +1,7 @@
/*
* U-boot - bf537_rtc.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BF537_RTC_H_
diff --git a/include/asm-blackfin/arch-bf537/cplbtab.h b/include/asm-blackfin/arch-bf537/cplbtab.h
deleted file mode 100644
index c5151bb..0000000
--- a/include/asm-blackfin/arch-bf537/cplbtab.h
+++ /dev/null
@@ -1,408 +0,0 @@
-/*This file is subject to the terms and conditions of the GNU General Public
- * License.
- *
- * Blackfin BF533/2.6 support : LG Soft India
- * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd
- * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's
- * shouldn't be victimized. cplbmgr.S search logic is corrected
- * to findout the appropriate victim.
- * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC
- * : LG Soft India
- */
-#include <config.h>
-
-#ifndef __ARCH_BFINNOMMU_CPLBTAB_H
-#define __ARCH_BFINNOMMU_CPLBTAB_H
-
-/*
- * ICPLB TABLE
- */
-
-.data
-/* This table is configurable */
- .align 4;
-
-/* Data Attibutes*/
-
-#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID)
-#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID)
-
-/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
-
-#define ANOMALY_05000158 0x200
-#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */
-#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
-
-#else /*Write Through */
-#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
-#endif
-
-.align 4;
-.global _ipdt_table _ipdt_table:.byte4 0x00000000;
-.byte4(SDRAM_IKERNEL); /*SDRAM_Page0 */
-.byte4 0x00400000;
-.byte4(SDRAM_IKERNEL); /*SDRAM_Page1 */
-.byte4 0x00800000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page2 */
-.byte4 0x00C00000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page3 */
-.byte4 0x01000000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page4 */
-.byte4 0x01400000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page5 */
-.byte4 0x01800000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page6 */
-.byte4 0x01C00000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page7 */
-.byte4 0x02000000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page8 */
-.byte4 0x02400000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page9 */
-.byte4 0x02800000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page10 */
-.byte4 0x02C00000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page11 */
-.byte4 0x03000000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page12 */
-.byte4 0x03400000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page13 */
-.byte4 0x03800000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page14 */
-.byte4 0x03C00000;
-.byte4(SDRAM_IGENERIC); /*SDRAM_Page15 */
-.byte4 0x20000000;
-.byte4(SDRAM_EBIU); /* Async Memory Bank 2 (Secnd) */
-
-.byte4 0xffffffff; /* end of section - termination */
-
-/*
- * PAGE DESCRIPTOR TABLE
- *
- */
-
-/*
- * Till here we are discussing about the static memory management model.
- * However, the operating envoronments commonly define more CPLB
- * descriptors to cover the entire addressable memory than will fit into
- * the available on-chip 16 CPLB MMRs. When this happens, the below table
- * will be used which will hold all the potentially required CPLB descriptors
- *
- * This is how Page descriptor Table is implemented in uClinux/Blackfin.
- */
-.global _dpdt_table _dpdt_table:.byte4 0x00000000;
-.byte4(SDRAM_DKERNEL); /*SDRAM_Page0 */
-.byte4 0x00400000;
-.byte4(SDRAM_DKERNEL); /*SDRAM_Page1 */
-.byte4 0x00800000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page2 */
-.byte4 0x00C00000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page3 */
-.byte4 0x01000000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page4 */
-.byte4 0x01400000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page5 */
-.byte4 0x01800000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page6 */
-.byte4 0x01C00000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page7 */
-.byte4 0x02000000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page8 */
-.byte4 0x02400000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page9 */
-.byte4 0x02800000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page10 */
-.byte4 0x02C00000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page11 */
-.byte4 0x03000000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page12 */
-.byte4 0x03400000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page13 */
-.byte4 0x03800000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page14 */
-.byte4 0x03C00000;
-.byte4(SDRAM_DGENERIC); /*SDRAM_Page15 */
-.byte4 0x20000000;
-.byte4(SDRAM_EBIU); /* Async Memory Bank 0 (Prim A) */
-
-#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537))
-.byte4 0xFF800000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF801000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF802000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF803000;
-.byte4(L1_DMEMORY);
-#endif
-.byte4 0xFF804000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF805000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF806000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF807000;
-.byte4(L1_DMEMORY);
-#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537))
-.byte4 0xFF900000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF901000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF902000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF903000;
-.byte4(L1_DMEMORY);
-#endif
-.byte4 0xFF904000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF905000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF906000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF907000;
-.byte4(L1_DMEMORY);
-
-.byte4 0xFFB00000;
-.byte4(L1_DMEMORY);
-
-.byte4 0xffffffff; /*end of section - termination */
-
-#ifdef CONFIG_CPLB_INFO
-.global _ipdt_swapcount_table; /* swapin count first, then swapout count */
-_ipdt_swapcount_table:
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 10 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 20 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 30 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 40 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 50 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 60 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 70 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 80 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 90 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 100 */
-
-.global _dpdt_swapcount_table; /* swapin count first, then swapout count */
-_dpdt_swapcount_table:
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 10 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 20 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 30 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 40 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 50 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 60 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 70 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 80 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 80 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 100 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 110 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000; /* 120 */
-
-#endif
-
-#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/
diff --git a/include/asm-blackfin/arch-bf537/irq.h b/include/asm-blackfin/arch-bf537/irq.h
index 4cb4c15..527d8a2 100644
--- a/include/asm-blackfin/arch-bf537/irq.h
+++ b/include/asm-blackfin/arch-bf537/irq.h
@@ -1,7 +1,7 @@
/*
* U-boot bf537_irq.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c
@@ -33,8 +33,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BF537_IRQ_H_
diff --git a/include/asm-blackfin/arch-bf561/bf561_serial.h b/include/asm-blackfin/arch-bf561/bf561_serial.h
index 0810228..eb01ca2 100644
--- a/include/asm-blackfin/arch-bf561/bf561_serial.h
+++ b/include/asm-blackfin/arch-bf561/bf561_serial.h
@@ -1,7 +1,7 @@
/*
* U-boot bf561_serial.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BF561_SERIAL_H_
diff --git a/include/asm-blackfin/arch-common/bf53x_rtc.h b/include/asm-blackfin/arch-common/bf53x_rtc.h
index bc09922..f4440a8 100644
--- a/include/asm-blackfin/arch-common/bf53x_rtc.h
+++ b/include/asm-blackfin/arch-common/bf53x_rtc.h
@@ -1,7 +1,7 @@
/*
* U-boot - bf533_rtc.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BF533_RTC_H_
diff --git a/include/asm-blackfin/bitops.h b/include/asm-blackfin/bitops.h
index 7766c4a..438e50b 100644
--- a/include/asm-blackfin/bitops.h
+++ b/include/asm-blackfin/bitops.h
@@ -1,7 +1,7 @@
/*
* U-boot - bitops.h Routines for bit operations
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_BITOPS_H
diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h
index 0ec9207..bf502a4 100644
--- a/include/asm-blackfin/blackfin.h
+++ b/include/asm-blackfin/blackfin.h
@@ -1,7 +1,7 @@
/*
* U-boot - blackfin.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_H_
diff --git a/include/asm-blackfin/blackfin_defs.h b/include/asm-blackfin/blackfin_defs.h
index 2190215..451d29c 100644
--- a/include/asm-blackfin/blackfin_defs.h
+++ b/include/asm-blackfin/blackfin_defs.h
@@ -1,7 +1,7 @@
/*
* U-boot - blackfin_defs.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef __BLACKFIN_DEFS_H__
diff --git a/include/asm-blackfin/byteorder.h b/include/asm-blackfin/byteorder.h
index 3b4df4e..a1a52a5 100644
--- a/include/asm-blackfin/byteorder.h
+++ b/include/asm-blackfin/byteorder.h
@@ -1,7 +1,7 @@
/*
* U-boot - byteorder.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_BYTEORDER_H
diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h
index dd695e1..9d8d9ec 100644
--- a/include/asm-blackfin/cplb.h
+++ b/include/asm-blackfin/cplb.h
@@ -50,7 +50,7 @@
#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID)
#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
+#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID)
/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
@@ -61,20 +61,20 @@
#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
+#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
#else /*Write Through */
#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
+#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
#endif
#if defined(CONFIG_BF561)
-#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 2) /* SDRAM +L1 + ASYNC_Memory */
+#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 1 + 4) /* SDRAM +L1 + ASYNC_Memory */
#else
-#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 1 + 3) /* SDRAM + L1 + ASYNC_Memory */
+#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 2) /* SDRAM + L1 + ASYNC_Memory */
#endif
#endif /* _CPLB_H */
diff --git a/include/asm-blackfin/current.h b/include/asm-blackfin/current.h
index 108c279..ed2b851 100644
--- a/include/asm-blackfin/current.h
+++ b/include/asm-blackfin/current.h
@@ -1,7 +1,7 @@
/*
* U-boot - current.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_CURRENT_H
diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h
index 0c01e9f..ea0b366 100644
--- a/include/asm-blackfin/delay.h
+++ b/include/asm-blackfin/delay.h
@@ -1,7 +1,7 @@
/*
* U-boot - delay.h Routines for introducing delays
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_DELAY_H
diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h
index b64d406..eb84f11 100644
--- a/include/asm-blackfin/entry.h
+++ b/include/asm-blackfin/entry.h
@@ -1,7 +1,7 @@
/*
* U-boot - entry.h Routines for context saving and restoring
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef __BLACKFIN_ENTRY_H
@@ -27,7 +27,6 @@
#include <linux/config.h>
#include <asm/setup.h>
-#include <asm/page.h>
/*
* Stack layout in 'ret_from_exception':
diff --git a/include/asm-blackfin/errno.h b/include/asm-blackfin/errno.h
index 713bba0..0d2c618 100644
--- a/include/asm-blackfin/errno.h
+++ b/include/asm-blackfin/errno.h
@@ -1,7 +1,7 @@
/*
* U-boot - errno.h Error number defines
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_ERRNO_H
diff --git a/include/asm-blackfin/global_data.h b/include/asm-blackfin/global_data.h
index 1c73853..9024d0a 100644
--- a/include/asm-blackfin/global_data.h
+++ b/include/asm-blackfin/global_data.h
@@ -1,7 +1,7 @@
/*
* U-boot - global_data.h Declarations for global data of u-boot
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef __ASM_GBL_DATA_H
diff --git a/include/asm-blackfin/hw_irq.h b/include/asm-blackfin/hw_irq.h
index baa3e0c..9b36055 100644
--- a/include/asm-blackfin/hw_irq.h
+++ b/include/asm-blackfin/hw_irq.h
@@ -1,7 +1,7 @@
/*
* U-boot - hw_irq.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* linux/arch/$(ARCH)/platform/$(PLATFORM)/hw_irq.h
@@ -24,8 +24,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <linux/config.h>
diff --git a/include/asm-blackfin/io-kernel.h b/include/asm-blackfin/io-kernel.h
index 3c087c3..5d0ad06 100644
--- a/include/asm-blackfin/io-kernel.h
+++ b/include/asm-blackfin/io-kernel.h
@@ -1,7 +1,7 @@
/*
* U-boot - io-kernel.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_IO_H
diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h
index 6bab6e7..332d2c6 100644
--- a/include/asm-blackfin/io.h
+++ b/include/asm-blackfin/io.h
@@ -1,7 +1,7 @@
/*
* U-boot - io.h IO routines
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_IO_H
@@ -37,6 +37,7 @@
static inline void sync(void)
{
+ __builtin_bfin_ssync();
}
/*
diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h
index aede742..1fff316 100644
--- a/include/asm-blackfin/irq.h
+++ b/include/asm-blackfin/irq.h
@@ -1,7 +1,7 @@
/*
* U-boot - irq.h Interrupt related header file
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file was based on
* linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c
@@ -31,8 +31,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_IRQ_H_
diff --git a/include/asm-blackfin/linkage.h b/include/asm-blackfin/linkage.h
index 18f0c36..4fc1acf 100644
--- a/include/asm-blackfin/linkage.h
+++ b/include/asm-blackfin/linkage.h
@@ -1,7 +1,7 @@
/*
* U-boot - linkage.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _LINUX_LINKAGE_H
diff --git a/include/asm-blackfin/machdep.h b/include/asm-blackfin/machdep.h
index 4fea74c..8bf9473 100644
--- a/include/asm-blackfin/machdep.h
+++ b/include/asm-blackfin/machdep.h
@@ -1,7 +1,7 @@
/*
* U-boot - machdep.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_MACHDEP_H
diff --git a/include/asm-blackfin/mem_init.h b/include/asm-blackfin/mem_init.h
index d9d8bf9..cb448ad 100644
--- a/include/asm-blackfin/mem_init.h
+++ b/include/asm-blackfin/mem_init.h
@@ -1,7 +1,7 @@
/*
* U-boot - mem_init.h Header file for memory initialization
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#if (CONFIG_MEM_MT48LC16M16A2TG_75 || \
diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h
deleted file mode 100644
index d59828c..0000000
--- a/include/asm-blackfin/page.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * U-boot - page.h
- *
- * Copyright (c) 2005 blackfin.uclinux.org
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _BLACKFIN_PAGE_H
-#define _BLACKFIN_PAGE_H
-
-#include <linux/config.h>
-
-/* PAGE_SHIFT determines the page size */
-
-#define PAGE_SHIFT (12)
-#define PAGE_SIZE (4096)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
-#ifdef __KERNEL__
-
-#include <asm/setup.h>
-
-#if PAGE_SHIFT < 13
-#define KTHREAD_SIZE (8192)
-#else
-#define KTHREAD_SIZE PAGE_SIZE
-#endif
-
-#ifndef __ASSEMBLY__
-
-#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr) free_page(addr)
-
-#define clear_page(page) memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr) clear_page(page)
-#define copy_user_page(to, from, vaddr) copy_page(to, from)
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct {
- unsigned long pte;
-} pte_t;
-typedef struct {
- unsigned long pmd[16];
-} pmd_t;
-typedef struct {
- unsigned long pgd;
-} pgd_t;
-typedef struct {
- unsigned long pgprot;
-} pgprot_t;
-
-#define pte_val(x) ((x).pte)
-#define pmd_val(x) ((&x)->pmd[0])
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) } )
-#define __pmd(x) ((pmd_t) { (x) } )
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
-/* Pure 2^n version of get_order */
-extern __inline__ int get_order(unsigned long size)
-{
- int order;
-
- size = (size - 1) >> (PAGE_SHIFT - 1);
- order = -1;
- do {
- size >>= 1;
- order++;
- } while (size);
- return order;
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#include <asm/page_offset.h>
-
-#define PAGE_OFFSET (PAGE_OFFSET_RAW)
-
-#ifndef __ASSEMBLY__
-
-#define __pa(vaddr) virt_to_phys((void *)vaddr)
-#define __va(paddr) phys_to_virt((unsigned long)paddr)
-
-#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
-#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define VALID_PAGE(page) ((page - mem_map) < max_mapnr)
-
-#define PAGE_BUG(page) do { \
- BUG(); \
-} while (0)
-
-#endif
-
-#endif
-
-#endif
diff --git a/include/asm-blackfin/page_offset.h b/include/asm-blackfin/page_offset.h
index 262473f..cfd8f1f 100644
--- a/include/asm-blackfin/page_offset.h
+++ b/include/asm-blackfin/page_offset.h
@@ -1,7 +1,7 @@
/*
* U-boot - page_offset.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
/*
diff --git a/include/asm-blackfin/posix_types.h b/include/asm-blackfin/posix_types.h
index f1f2b5f..27889e8 100644
--- a/include/asm-blackfin/posix_types.h
+++ b/include/asm-blackfin/posix_types.h
@@ -1,7 +1,7 @@
/*
* U-boot - posix_types.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef __ARCH_BLACKFIN_POSIX_TYPES_H
diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h
index df49bed..6cd4f56 100644
--- a/include/asm-blackfin/processor.h
+++ b/include/asm-blackfin/processor.h
@@ -1,7 +1,7 @@
/*
* U-boot - processor.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* include/asm-m68k/processor.h
@@ -23,8 +23,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef __ASM_BLACKFIN_PROCESSOR_H
diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h
index afd5777..f1b7d00 100644
--- a/include/asm-blackfin/ptrace.h
+++ b/include/asm-blackfin/ptrace.h
@@ -1,7 +1,7 @@
/*
* U-boot - ptrace.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_PTRACE_H
diff --git a/include/asm-blackfin/segment.h b/include/asm-blackfin/segment.h
index 9e6d817..f309543 100644
--- a/include/asm-blackfin/segment.h
+++ b/include/asm-blackfin/segment.h
@@ -1,7 +1,7 @@
/*
* U-boot - segment.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_SEGMENT_H
diff --git a/include/asm-blackfin/setup.h b/include/asm-blackfin/setup.h
index a3c1715..b6b8267 100644
--- a/include/asm-blackfin/setup.h
+++ b/include/asm-blackfin/setup.h
@@ -1,7 +1,7 @@
/*
* U-boot - setup.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* asm/setup.h -- Definition of the Linux/Blackfin setup information
@@ -22,8 +22,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_SETUP_H
diff --git a/include/asm-blackfin/shared_resources.h b/include/asm-blackfin/shared_resources.h
index fbef186..d280ffe 100644
--- a/include/asm-blackfin/shared_resources.h
+++ b/include/asm-blackfin/shared_resources.h
@@ -1,7 +1,7 @@
/*
* U-boot - setup.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _SHARED_RESOURCES_H_
diff --git a/include/asm-blackfin/string.h b/include/asm-blackfin/string.h
index aac6bc9..dd50207 100644
--- a/include/asm-blackfin/string.h
+++ b/include/asm-blackfin/string.h
@@ -1,7 +1,7 @@
/*
* U-boot - string.h String functions
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
/* Changed by Lineo Inc. May 2001 */
@@ -30,7 +30,6 @@
#ifdef __KERNEL__ /* only set these up for kernel code */
#include <asm/setup.h>
-#include <asm/page.h>
#include <config.h>
#include <asm/blackfin.h>
diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h
index 0e53adf..eda887f 100644
--- a/include/asm-blackfin/system.h
+++ b/include/asm-blackfin/system.h
@@ -1,7 +1,7 @@
/*
* U-boot - system.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_SYSTEM_H
diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h
index 29e6eba..b90ceda 100644
--- a/include/asm-blackfin/traps.h
+++ b/include/asm-blackfin/traps.h
@@ -1,7 +1,7 @@
/*
* U-boot - traps.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* linux/include/asm/traps.h
@@ -23,8 +23,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
/*
diff --git a/include/asm-blackfin/types.h b/include/asm-blackfin/types.h
index 942ed27..665a419 100644
--- a/include/asm-blackfin/types.h
+++ b/include/asm-blackfin/types.h
@@ -1,7 +1,7 @@
/*
* U-boot - types.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _BLACKFIN_TYPES_H
diff --git a/include/asm-blackfin/u-boot.h b/include/asm-blackfin/u-boot.h
index e1a435a..b4928da 100644
--- a/include/asm-blackfin/u-boot.h
+++ b/include/asm-blackfin/u-boot.h
@@ -1,7 +1,7 @@
/*
* U-boot - u-boot.h Structure declarations for board specific data
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,15 +21,15 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef _U_BOOT_H_
#define _U_BOOT_H_ 1
typedef struct bd_info {
- int bi_baudrate; /* serial console baudrate */
+ int bi_baudrate; /* serial console baudrate */
unsigned long bi_ip_addr; /* IP Address */
unsigned char bi_enetaddr[6]; /* Ethernet adress */
unsigned long bi_arch_number; /* unique id for this board */
diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h
index 61e2bfe..6e913bb 100644
--- a/include/asm-blackfin/uaccess.h
+++ b/include/asm-blackfin/uaccess.h
@@ -1,7 +1,7 @@
/*
* U-boot - uaccess.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on
* Based on: include/asm-m68knommu/uaccess.h
@@ -22,8 +22,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef __BLACKFIN_UACCESS_H
diff --git a/include/asm-blackfin/virtconvert.h b/include/asm-blackfin/virtconvert.h
index 769f5a0..9eda9f8 100644
--- a/include/asm-blackfin/virtconvert.h
+++ b/include/asm-blackfin/virtconvert.h
@@ -1,7 +1,7 @@
/*
* U-boot - virtconvert.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef __BLACKFIN_VIRT_CONVERT__
@@ -33,7 +33,6 @@
#include <linux/config.h>
#include <asm/setup.h>
-#include <asm/page.h>
#define mm_vtop(vaddr) ((unsigned long) vaddr)
#define mm_ptov(vaddr) ((unsigned long) vaddr)
diff --git a/include/asm-microblaze/asm.h b/include/asm-microblaze/asm.h
new file mode 100755
index 0000000..f10f89c
--- /dev/null
+++ b/include/asm-microblaze/asm.h
@@ -0,0 +1,98 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* FSL macros */
+#define NGET(val, fslnum) \
+ __asm__ __volatile__ ("nget %0, rfsl" #fslnum :"=r" (val));
+
+#define GET(val, fslnum) \
+ __asm__ __volatile__ ("get %0, rfsl" #fslnum :"=r" (val));
+
+#define NCGET(val, fslnum) \
+ __asm__ __volatile__ ("ncget %0, rfsl" #fslnum :"=r" (val));
+
+#define CGET(val, fslnum) \
+ __asm__ __volatile__ ("cget %0, rfsl" #fslnum :"=r" (val));
+
+#define NPUT(val, fslnum) \
+ __asm__ __volatile__ ("nput %0, rfsl" #fslnum ::"r" (val));
+
+#define PUT(val, fslnum) \
+ __asm__ __volatile__ ("put %0, rfsl" #fslnum ::"r" (val));
+
+#define NCPUT(val, fslnum) \
+ __asm__ __volatile__ ("ncput %0, rfsl" #fslnum ::"r" (val));
+
+#define CPUT(val, fslnum) \
+ __asm__ __volatile__ ("cput %0, rfsl" #fslnum ::"r" (val));
+
+/* CPU dependent */
+/* machine status register */
+#define MFS(val, reg) \
+ __asm__ __volatile__ ("mfs %0," #reg :"=r" (val));
+
+#define MTS(val, reg) \
+ __asm__ __volatile__ ("mts " #reg ", %0"::"r" (val));
+
+/* get return address from interrupt */
+#define R14(val) \
+ __asm__ __volatile__ ("addi %0, r14, 0":"=r" (val));
+
+#define NOP __asm__ __volatile__ ("nop");
+
+/* use machine status registe USE_MSR_REG */
+#ifdef XILINX_USE_MSR_INSTR
+#define MSRSET(val) \
+ __asm__ __volatile__ ("msrset r0," #val );
+
+#define MSRCLR(val) \
+ __asm__ __volatile__ ("msrclr r0," #val );
+
+#else
+#define MSRSET(val) \
+{ \
+ register unsigned tmp; \
+ __asm__ __volatile__ (" \
+ mfs %0, rmsr; \
+ ori %0, %0, "#val"; \
+ mts rmsr, %0; \
+ nop;" \
+ : "=r" (tmp) \
+ : "d" (val) \
+ : "memory"); \
+}
+
+#define MSRCLR(val) \
+{ \
+ register unsigned tmp; \
+ __asm__ __volatile__ (" \
+ mfs %0, rmsr; \
+ andi %0, %0, ~"#val"; \
+ mts rmsr, %0; \
+ nop;" \
+ : "=r" (tmp) \
+ : "d" (val) \
+ : "memory"); \
+}
+#endif
diff --git a/include/asm-microblaze/microblaze_intc.h b/include/asm-microblaze/microblaze_intc.h
index 6635aea..4c385aa 100644
--- a/include/asm-microblaze/microblaze_intc.h
+++ b/include/asm-microblaze/microblaze_intc.h
@@ -38,3 +38,6 @@
void *arg;
int count; /* number of interrupt */
};
+
+void install_interrupt_handler (int irq, interrupt_handler_t * hdlr,
+ void *arg);
diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
index ff9512f..d1bb159 100644
--- a/include/asm-ppc/e300.h
+++ b/include/asm-ppc/e300.h
@@ -6,19 +6,9 @@
#ifndef __E300_H__
#define __E300_H__
-/*
- * e300 Processor Version & Revision Numbers
- */
-#define PVR_83xx 0x80830000
-#define PVR_8349_REV10 (PVR_83xx | 0x0010)
-#define PVR_8349_REV11 (PVR_83xx | 0x0011)
-#define PVR_8360_REV10 (PVR_83xx | 0x0020)
-#define PVR_8360_REV11 (PVR_83xx | 0x0020)
-
-#if defined(CONFIG_MPC832X)
-#undef PVR_83xx
-#define PVR_83xx 0x80840000
-#endif
+#define PVR_E300C1 0x80830000
+#define PVR_E300C2 0x80840000
+#define PVR_E300C3 0x80850000
/*
* Hardware Implementation-Dependent Register 0 (HID0)
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index c113b7e..cd24636 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -49,14 +49,19 @@
unsigned long scc_clk;
unsigned long brg_clk;
#endif
+#if defined(CONFIG_MPC7448HPC2)
+ unsigned long mem_clk;
+#endif
#if defined(CONFIG_MPC83XX)
/* There are other clocks in the MPC83XX */
u32 csb_clk;
-#if defined (CONFIG_MPC834X)
+#if defined (CONFIG_MPC834X) || defined(CONFIG_MPC831X)
u32 tsec1_clk;
u32 tsec2_clk;
- u32 usbmph_clk;
u32 usbdr_clk;
+#endif
+#if defined (CONFIG_MPC834X)
+ u32 usbmph_clk;
#endif /* CONFIG_MPC834X */
u32 core_clk;
u32 i2c1_clk;
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index 5e088d6..0de9338 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -206,7 +206,9 @@
u32 pmccr; /* PMC Configuration Register */
u32 pmcer; /* PMC Event Register */
u32 pmcmr; /* PMC Mask Register */
- u8 res0[0xF4];
+ u32 pmccr1; /* PMC Configuration Register 1 */
+ u32 pmccr2; /* PMC Configuration Register 2 */
+ u8 res0[0xEC];
} pmc83xx_t;
/*
@@ -355,7 +357,8 @@
u8 res2[0x8];
u32 mrtpr; /* Memory Refresh Timer Prescaler Register */
u32 mdr; /* UPM Data Register */
- u8 res3[0x8];
+ u8 res3[0x4];
+ u32 lsor; /* Special Operation Initiation Register */
u32 lsdmr; /* SDRAM Mode Register */
u8 res4[0x8];
u32 lurt; /* UPM Refresh Timer */
@@ -369,8 +372,14 @@
u8 res6[0xC];
u32 lbcr; /* Configuration Register */
u32 lcrr; /* Clock Ratio Register */
- u8 res7[0x28];
- u8 res8[0xF00];
+ u8 res7[0x8];
+ u32 fmr; /* Flash Mode Register */
+ u32 fir; /* Flash Instruction Register */
+ u32 fcr; /* Flash Command Register */
+ u32 fbar; /* Flash Block Addr Register */
+ u32 fpar; /* Flash Page Addr Register */
+ u32 fbcr; /* Flash Byte Count Register */
+ u8 res8[0xF08];
} lbus83xx_t;
/*
@@ -527,7 +536,7 @@
* USB
*/
typedef struct usb83xx {
- u8 fixme[0x2000];
+ u8 fixme[0x1000];
} usb83xx_t;
/*
@@ -574,7 +583,42 @@
ios83xx_t ios; /* Sequencer */
pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */
u8 res5[0x19900];
- usb83xx_t usb;
+ usb83xx_t usb[2];
+ tsec83xx_t tsec[2];
+ u8 res6[0xA000];
+ security83xx_t security;
+ u8 res7[0xC0000];
+} immap_t;
+
+#elif defined(CONFIG_MPC831X)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ gpio83xx_t gpio[1]; /* General purpose I/O module */
+ u8 res0[0x1300];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res1[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res2[0x900];
+ lbus83xx_t lbus; /* Local Bus Controller Registers */
+ u8 res3[0x1000];
+ spi83xx_t spi; /* Serial Peripheral Interface */
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
+ u8 res4[0x80];
+ ios83xx_t ios; /* Sequencer */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
+ u8 res5[0x1aa00];
+ usb83xx_t usb[1];
tsec83xx_t tsec[2];
u8 res6[0xA000];
security83xx_t security;
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index b226825..48fd982 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -396,8 +396,8 @@
#define BOOKE_PAGESZ_16M 7
#define BOOKE_PAGESZ_64M 8
#define BOOKE_PAGESZ_256M 9
-#define BOOKE_PAGESZ_1GB 10
-#define BOOKE_PAGESZ_4GB 11
+#define BOOKE_PAGESZ_1G 10
+#define BOOKE_PAGESZ_4G 11
#if defined(CONFIG_MPC86xx)
#define LAWBAR_BASE_ADDR 0x00FFFFFF
@@ -413,6 +413,7 @@
#define LAWAR_TRGT_IF_PCI1 0x00000000
#define LAWAR_TRGT_IF_PCIX 0x00000000
#define LAWAR_TRGT_IF_PCI2 0x00100000
+#define LAWAR_TRGT_IF_PEX 0x00200000
#define LAWAR_TRGT_IF_LBC 0x00400000
#define LAWAR_TRGT_IF_CCSR 0x00800000
#define LAWAR_TRGT_IF_DDR_INTERLEAVED 0x00B00000
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 0585962..5efc3ee 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -232,6 +232,9 @@
#define HID0_BHTE (1<<2) /* Branch History Table Enable */
#define HID0_BTCD (1<<1) /* Branch target cache disable */
#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
+#define HID1_RFXE (1<<17) /* Read Fault Exception Enable */
+#define HID1_ASTME (1<<13) /* Address bus streaming mode */
+#define HID1_ABE (1<<12) /* Address broadcast enable */
#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
#ifndef CONFIG_BOOKE
#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
@@ -415,10 +418,12 @@
#define SPRN_IVOR15 0x19f /* Interrupt Vector Offset Register 15 */
/* e500 definitions */
-#define SPRN_L1CSR0 0x3f2 /* L1 Cache Control and Status Register 0 */
+#define SPRN_L1CSR0 0x3f2 /* L1 Data Cache Control and Status Register 0 */
+#define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */
#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */
-#define SPRN_L1CSR1 0x3f3 /* L1 Cache Control and Status Register 1 */
+#define SPRN_L1CSR1 0x3f3 /* L1 Instruction Cache Control and Status Register 1 */
+#define L1CSR1_CPE 0x00010000 /* Instruction Cache Parity Enable */
#define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */
#define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */
@@ -701,8 +706,6 @@
#define SVR_MJREV(svr) (((svr) >> 4) & 0x0F) /* Major SOC design revision indicator */
#define SVR_MNREV(svr) (((svr) >> 0) & 0x0F) /* Minor SOC design revision indicator */
-/* System-On-Chip Version Numbers (version field only) */
-#define SVR_MPC5200 0x8011
/* Processor Version Register */
@@ -813,6 +816,12 @@
#define PVR_8260_HIP7R1 0x80822013
#define PVR_8260_HIP7RA 0x80822014
+/*
+ * MPC 52xx
+ */
+#define PVR_5200 0x80822011
+#define PVR_5200B 0x80822014
+
/*
* System Version Register
@@ -840,9 +849,12 @@
#define SVR_8560 0x8070
#define SVR_8555 0x8079
#define SVR_8541 0x807A
+#define SVR_8544 0x8034
+#define SVR_8544_E 0x803C
#define SVR_8548 0x8031
#define SVR_8548_E 0x8039
#define SVR_8641 0x8090
+#define SVR_8568_E 0x807D
/* I am just adding a single entry for 8260 boards. I think we may be
diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h
index cf36583..b3ccdce 100644
--- a/include/cmd_confdefs.h
+++ b/include/cmd_confdefs.h
@@ -94,6 +94,7 @@
#define CFG_CMD_EXT2 0x1000000000000000ULL /* EXT2 Support */
#define CFG_CMD_SNTP 0x2000000000000000ULL /* SNTP support */
#define CFG_CMD_DISPLAY 0x4000000000000000ULL /* Display support */
+#define CFG_CMD_MFSL 0x8000000000000000ULL /* FSL support for Microblaze */
#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFULL /* ALL commands */
@@ -125,6 +126,7 @@
CFG_CMD_IRQ | \
CFG_CMD_JFFS2 | \
CFG_CMD_KGDB | \
+ CFG_CMD_MFSL | \
CFG_CMD_MII | \
CFG_CMD_MMC | \
CFG_CMD_NAND | \
diff --git a/include/common.h b/include/common.h
index b162dbd..3c4b37b 100644
--- a/include/common.h
+++ b/include/common.h
@@ -402,6 +402,10 @@
void ppcSync(void);
void ppcDcbz(unsigned long value);
#endif
+#if defined (CONFIG_MICROBLAZE)
+unsigned short in16(unsigned int);
+void out16(unsigned int, unsigned short value);
+#endif
#if defined (CONFIG_MPC83XX)
void ppcDWload(unsigned int *addr, unsigned int *ret);
@@ -440,8 +444,6 @@
int adjust_sdram_tbs_8xx (void);
#if defined(CONFIG_8260)
int prt_8260_clks (void);
-#elif defined(CONFIG_MPC83XX)
-int print_clock_conf(void);
#elif defined(CONFIG_MPC5xxx)
int prt_mpc5xxx_clks (void);
#endif
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 5b54f30..bc30977 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -282,17 +282,17 @@
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
/*
* PCI Bus clocking configuration
*
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet
- * hasn't been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
*/
-#if defined(CFG_IPBSPEED_133)
-# define CFG_PCISPEED_66 /* define for 66MHz speed */
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
+# define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
#endif
/*
@@ -488,7 +488,7 @@
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
# define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
#else
# define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 0d38254..73be069 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -167,9 +167,9 @@
* IPB Bus clocking configuration.
*/
#if defined(CONFIG_LITE5200B)
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
#else
-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
#endif
#endif /* CONFIG_MPC5200 */
@@ -182,7 +182,7 @@
#define OF_CPU "PowerPC,5200@0"
#define OF_SOC "soc5200@f0000000"
-#define OF_TBCLK (bd->bi_busfreq / 8)
+#define OF_TBCLK (bd->bi_busfreq / 4)
#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
/*
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
new file mode 100644
index 0000000..6976313
--- /dev/null
+++ b/include/configs/MPC8313ERDB.h
@@ -0,0 +1,561 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * mpc8313epb board configuration file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1
+#define CONFIG_MPC83XX 1
+#define CONFIG_MPC831X 1
+#define CONFIG_MPC8313 1
+#define CONFIG_MPC8313ERDB 1
+
+#define CONFIG_PCI
+#define CONFIG_83XX_GENERIC_PCI
+
+#ifdef CFG_66MHZ
+#define CONFIG_83XX_CLKIN 66666667 /* in Hz */
+#elif defined(CFG_33MHZ)
+#define CONFIG_83XX_CLKIN 33333333 /* in Hz */
+#else
+#error Unknown oscillator frequency.
+#endif
+
+#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+#define CFG_IMMR 0xE0000000
+
+#define CFG_MEMTEST_START 0x00001000
+#define CFG_MEMTEST_END 0x07f00000
+
+/* Early revs of this board will lock up hard when attempting
+ * to access the PMC registers, unless a JTAG debugger is
+ * connected, or some resistor modifications are made.
+ */
+#define CFG_8313ERDB_BROKEN_PMC 1
+
+#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+
+/*
+ * Manually set up DDR parameters, as this board does not
+ * seem to have the SPD connected to I2C.
+ */
+#define CFG_DDR_SIZE 128 /* MB */
+#define CFG_DDR_CONFIG ( CSCONFIG_EN | CSCONFIG_AP \
+ | 0x00040000 /* TODO */ \
+ | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 )
+ /* 0x80840102 */
+
+#define CFG_DDR_TIMING_3 0x00000000
+#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_WRT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_RRT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_WWT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
+ | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
+ /* 0x00220802 */
+#define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
+ | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
+ | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
+ | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
+ | (13 << TIMING_CFG1_REFREC_SHIFT ) \
+ | ( 3 << TIMING_CFG1_WRREC_SHIFT ) \
+ | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
+ | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
+ /* 0x3935d322 */
+#define CFG_DDR_TIMING_2 ( ( 0 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+ | (31 << TIMING_CFG2_CPO_SHIFT ) \
+ | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
+ | ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
+ | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
+ | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
+ | (10 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+ /* 0x0f9048ca */ /* P9-45,may need tuning */
+#define CFG_DDR_INTERVAL ( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+ | ( 100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+ /* 0x03200064 */
+#if defined(CONFIG_DDR_2T_TIMING)
+#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \
+ | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \
+ | SDRAM_CFG_2T_EN \
+ | SDRAM_CFG_DBW_32 )
+#else
+#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \
+ | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \
+ | SDRAM_CFG_32_BE )
+ /* 0x43080000 */
+#endif
+#define CFG_SDRAM_CFG2 0x00401000;
+/* set burst length to 8 for 32-bit data path */
+#define CFG_DDR_MODE ( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \
+ | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) )
+ /* 0x44400232 */
+#define CFG_DDR_MODE_2 0x8000C000;
+
+#define CFG_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+ /*0x02000000*/
+#define CFG_DDRCDR_VALUE ( DDRCDR_EN \
+ | DDRCDR_PZ_NOMZ \
+ | DDRCDR_NZ_NOMZ \
+ | DDRCDR_M_ODR )
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI /* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */
+#define CFG_FLASH_SIZE 8 /* flash size in MB */
+#define CFG_FLASH_EMPTY_INFO /* display empty sectors */
+#define CFG_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \
+ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+ BR_V) /* valid */
+#define CFG_OR0_PRELIM ( 0xFF000000 /* 16 MByte */ \
+ | OR_GPCM_XACS \
+ | OR_GPCM_SCY_9 \
+ | OR_GPCM_EHTR \
+ | OR_GPCM_EAD )
+ /* 0xFF006FF7 TODO SLOW 16 MB flash size */
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */
+#define CFG_LBLAWAR0_PRELIM 0x80000017 /* 16 MB window size */
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 135 /* sectors per device */
+
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#endif
+
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/
+
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
+
+/*
+ * Local Bus LCRR and LBCR regs
+ */
+#define CFG_LCRR LCRR_EADC_1 | LCRR_CLKDIV_2 /* 0x00010002 */
+#define CFG_LBC_LBCR ( 0x00040000 /* TODO */ \
+ | (0xFF << LBCR_BMT_SHIFT) \
+ | 0xF ) /* 0x0004ff0f */
+
+#define CFG_LBC_MRTPR 0x20000000 /*TODO */ /* LB refresh timer prescal, 266MHz/32 */
+
+/* drivers/nand/nand.c */
+#define CFG_NAND_BASE 0xE2800000 /* 0xF0000000 */
+#define CFG_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+
+#define CFG_BR1_PRELIM ( CFG_NAND_BASE \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V ) /* valid */
+#define CFG_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \
+ | OR_FCM_CSCT \
+ | OR_FCM_CST \
+ | OR_FCM_CHT \
+ | OR_FCM_SCY_1 \
+ | OR_FCM_TRLX \
+ | OR_FCM_EHTR )
+ /* 0xFFFF8396 */
+#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE
+#define CFG_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
+
+#define CFG_VSC7385_BASE 0xF0000000
+
+#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */
+#define CFG_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */
+#define CFG_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/
+#define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE/* Access window base at VSC7385 base */
+#define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access window size 128K */
+
+/* local bus read write buffer mapping */
+#define CFG_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */
+#define CFG_OR3_PRELIM 0xFFFF8FF7 /* 32kB */
+#define CFG_LBLAWBAR3_PRELIM 0xFA000000
+#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,8313@0"
+#define OF_SOC "soc8313@e0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc8313@e0000000/serial@4500"
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support*/
+#define CONFIG_FSL_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
+
+/* TSEC */
+#define CFG_TSEC1_OFFSET 0x24000
+#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC2_OFFSET 0x25000
+#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
+#define CONFIG_NET_MULTI
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_MMIO_BASE 0x90000000
+#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE
+#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xE2000000
+#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
+
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
+
+/*
+ * TSEC configuration
+ */
+#define CONFIG_TSEC_ENET /* TSEC ethernet support */
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+#define CONFIG_GMII 1 /* MII PHY management */
+#define CONFIG_MPC83XX_TSEC1 1
+
+#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0"
+#define CONFIG_MPC83XX_TSEC2 1
+#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1"
+#define TSEC1_PHY_ADDR 0x1c
+#define TSEC2_PHY_ADDR 4
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME "TSEC1"
+
+/*
+ * Configure on-board RTC
+ */
+#define CONFIG_RTC_DS1337
+#define CFG_I2C_RTC_ADDR 0x68
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
+ #define CFG_ENV_SIZE 0x2000
+
+/* Address and size of Redundant Environment Sector */
+#else
+ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+ #define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CFG_BASE_COMMANDS ( CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_DHCP \
+ | CFG_CMD_I2C \
+ | CFG_CMD_MII \
+ | CFG_CMD_DATE \
+ | CFG_CMD_PCI)
+
+#define CONFIG_CMDLINE_EDITING 1
+
+#define CFG_RAMBOOT_COMMANDS (CFG_BASE_COMMANDS & \
+ ~(CFG_CMD_ENV | CFG_CMD_LOADS))
+
+#if defined(CFG_RAMBOOT)
+#define CONFIG_COMMANDS CFG_RAMBOOT_COMMANDS
+#else
+#define CONFIG_COMMANDS CFG_BASE_COMMANDS
+#endif
+
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE 16384
+#define CFG_CACHELINE_SIZE 32
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
+
+#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */
+
+#ifdef CFG_66MHZ
+
+/* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */
+/* 0x62040000 */
+#define CFG_HRCW_LOW (\
+ 0x20000000 /* reserved, must be set */ |\
+ HRCWL_DDRCM |\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_2X1 |\
+ HRCWL_CSB_TO_CLKIN_2X1 |\
+ HRCWL_CORE_TO_CSB_2X1)
+
+#elif defined(CFG_33MHZ)
+
+/* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */
+/* 0x65040000 */
+#define CFG_HRCW_LOW (\
+ 0x20000000 /* reserved, must be set */ |\
+ HRCWL_DDRCM |\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_2X1 |\
+ HRCWL_CSB_TO_CLKIN_5X1 |\
+ HRCWL_CORE_TO_CSB_2X1)
+
+#endif
+
+/* 0xa0606c00 */
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY |\
+ HRCWH_TSEC1M_IN_RGMII |\
+ HRCWH_TSEC2M_IN_RGMII |\
+ HRCWH_BIG_ENDIAN |\
+ HRCWH_LALE_NORMAL)
+
+/* System IO Config */
+#define CFG_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */
+#define CFG_SICRL SICRL_USBDR /* Enable Internal USB Phy */
+
+#define CFG_HID0_INIT 0x000000000
+#define CFG_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
+ HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
+
+#define CFG_HID2 HID2_HBE
+
+/* DDR @ 0x00000000 */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI @ 0x80000000 */
+#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10)
+#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI2 not supported on 8313 */
+#define CFG_IBAT3L (0)
+#define CFG_IBAT3U (0)
+#define CFG_IBAT4L (0)
+#define CFG_IBAT4U (0)
+
+/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
+#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
+#define CFG_IBAT6L (0xF0000000 | BATL_PP_10)
+#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT7L (0)
+#define CFG_IBAT7U (0)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+#define CFG_DBAT4L CFG_IBAT4L
+#define CFG_DBAT4U CFG_IBAT4U
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ETHADDR 00:E0:0C:00:95:01
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:E0:0C:00:95:02
+
+#define CONFIG_IPADDR 10.0.0.2
+#define CONFIG_SERVERIP 10.0.0.1
+#define CONFIG_GATEWAYIP 10.0.0.1
+#define CONFIG_NETMASK 255.0.0.0
+#define CONFIG_NETDEV eth1
+
+#define CONFIG_HOSTNAME mpc8313erdb
+#define CONFIG_ROOTPATH /nfs/root/path
+#define CONFIG_BOOTFILE uImage
+#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
+#define CONFIG_FDTFILE mpc8313erdb.dtb
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
+#define CONFIG_BAUDRATE 115200
+
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \
+ "ethprime=TSEC1\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \
+ "console=ttyS0\0" \
+ "setbootargs=setenv bootargs " \
+ "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
+ "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv rootdev /dev/nfs;" \
+ "run setbootargs;" \
+ "run setipargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv rootdev /dev/ram;" \
+ "run setbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#undef MK_STR
+#undef XMK_STR
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 37bbfb3..906339e 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -154,6 +154,9 @@
#define CFG_MEMTEST_START 0x1000 /* memtest region */
#define CFG_MEMTEST_END 0x2000
+#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
+ DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+
#ifdef CONFIG_HARD_I2C
#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
#endif
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 74a84f4..5aeea58 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -330,13 +330,12 @@
/*
* General PCI
- * Addresses are mapped 1-1.
+ * Memory space is mapped 1-1, but I/O space must start from 0.
*/
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
-
-#define CFG_PCI1_IO_BASE 0x0
+#define CFG_PCI1_IO_BASE 0x00000000
#define CFG_PCI1_IO_PHYS 0xe2000000
#define CFG_PCI1_IO_SIZE 0x100000 /* 1M */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index db389cf..fb360d2 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -334,7 +334,7 @@
/*
* General PCI
- * Addresses are mapped 1-1.
+ * Memory space is mapped 1-1, but I/O space must start from 0.
*/
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
new file mode 100644
index 0000000..4c34308
--- /dev/null
+++ b/include/configs/MPC8544DS.h
@@ -0,0 +1,591 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpc8544ds board configuration file
+ *
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE 1 /* BOOKE */
+#define CONFIG_E500 1 /* BOOKE e500 family */
+#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */
+#define CONFIG_MPC8544 1
+#define CONFIG_MPC8544DS 1
+
+#undef CONFIG_PCI /* Enable PCI/PCIE */
+#undef CONFIG_PCI1 /* PCI controller 1 */
+#undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
+#undef CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
+#undef CONFIG_PCIE3 /* PCIE controler 3 (ULI bridge) */
+#undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#undef CONFIG_DDR_DLL
+#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+
+#define CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+
+#define CONFIG_DDR_ECC_CMD
+
+/*
+ * When initializing flash, if we cannot find the manufacturer ID,
+ * assume this is the AMD flash associated with the CDS board.
+ * This allows booting from a promjet.
+ */
+#define CONFIG_ASSUME_AMD_FLASH
+
+#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_board_sys_clk(unsigned long dummy);
+#endif
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
+#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
+
+/*
+ * Only possible on E500 Version 2 or newer cores.
+ */
+#define CONFIG_ENABLE_36BIT_PHYS 1
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00400000
+#define CFG_ALT_MEMTEST
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
+#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+
+#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
+#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000)
+#define CFG_PCIE2_ADDR (CFG_CCSRBAR+0x9000)
+#define CFG_PCIE3_ADDR (CFG_CCSRBAR+0xb000)
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
+
+#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
+
+/*
+ * Make sure required options are set
+ */
+#ifndef CONFIG_SPD_EEPROM
+#error ("CONFIG_SPD_EEPROM is required")
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/*
+ * Memory map
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable
+ *
+ * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable
+ *
+ * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable
+ *
+ * 0xe000_0000 0xe00f_ffff CCSR 1M non-cacheable
+ * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable
+ *
+ * Localbus cacheable
+ *
+ * 0xf000_0000 0xf3ff_ffff SDRAM 64M Cacheable
+ * 0xf401_0000 0xf401_3fff L1 for stack 4K Cacheable TLB0
+ *
+ * Localbus non-cacheable
+ *
+ * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M non-cacheable
+ * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M non-cacheable
+ * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M non-cacheable
+ *
+ */
+
+/*
+ * Local Bus Definitions
+ */
+#define CFG_BOOT_BLOCK 0xfc000000 /* boot TLB */
+
+#define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */
+
+#define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */
+
+#define CFG_BR0_PRELIM 0xff801001
+#define CFG_BR1_PRELIM 0xfe801001
+
+#define CFG_OR0_PRELIM 0xff806e65
+#define CFG_OR1_PRELIM 0xff806e65
+
+#define CFG_FLASH_BANKS_LIST {0xfe800000,CFG_FLASH_BASE}
+
+#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
+#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+#define CFG_LBC_NONCACHE_BASE 0xf8000000
+
+#define CFG_BR2_PRELIM 0xf8201001 /* port size 16bit */
+#define CFG_OR2_PRELIM 0xfff06ff7 /* 1MB Compact Flash area*/
+
+#define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */
+#define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/
+
+#define PIXIS_BASE 0xf8100000 /* PIXIS registers */
+#define PIXIS_ID 0x0 /* Board ID at offset 0 */
+#define PIXIS_VER 0x1 /* Board version at offset 1 */
+#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */
+#define PIXIS_RST 0x4 /* PIXIS Reset Control register */
+#define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch
+ * register */
+#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */
+#define PIXIS_VCTL 0x10 /* VELA Control Register */
+#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */
+#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */
+#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */
+#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */
+#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */
+#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */
+#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */
+
+
+/* define to use L1 as initial stack */
+#define CONFIG_L1_INIT_RAM 1
+#define CFG_INIT_L1_LOCK 1
+#define CFG_INIT_L1_ADDR 0xf4010000 /* Initial L1 address */
+#define CFG_INIT_L1_END 0x00004000 /* End of used area in RAM */
+
+/* define to use L2SRAM as initial stack */
+#undef CONFIG_L2_INIT_RAM
+#define CFG_INIT_L2_ADDR 0xf8fc0000
+#define CFG_INIT_L2_END 0x00040000 /* End of used area in RAM */
+
+#ifdef CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_ADDR CFG_INIT_L1_ADDR
+#define CFG_INIT_RAM_END CFG_INIT_L1_END
+#else
+#define CFG_INIT_RAM_ADDR CFG_INIT_L2_ADDR
+#define CFG_INIT_RAM_END CFG_INIT_L2_END
+#endif
+
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/* Serial Port - controlled on board with jumper J8
+ * open - index 2
+ * shorted - index 1
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,8544@0"
+#define OF_SOC "soc8544@e0000000"
+#define OF_TBCLK (bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH "/soc8544@e0000000/serial@4500"
+
+/* I2C */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3100
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+#define CFG_PCIE_PHYS 0x80000000 /* 1G PCIE TLB */
+#define CFG_PCI_PHYS 0xc0000000 /* 512M PCI TLB */
+
+#define CFG_PCI1_MEM_BASE 0xc0000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe1000000
+#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x80000000
+
+/* controller 2, Slot 1, tgtid 1, Base address 9000 */
+#define CFG_PCIE2_MEM_BASE 0x80000000
+#define CFG_PCIE2_MEM_PHYS CFG_PCIE2_MEM_BASE
+#define CFG_PCIE2_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCIE2_IO_BASE 0x00000000
+#define CFG_PCIE2_IO_PHYS 0xe2000000
+#define CFG_PCIE2_IO_SIZE 0x00100000 /* 1M */
+
+/* controller 1, Slot 2,tgtid 2, Base address a000 */
+#define CFG_PCIE1_MEM_BASE 0xa0000000
+#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE 0x08000000 /* 128M */
+#define CFG_PCIE1_MEM_BASE2 0xa8000000
+#define CFG_PCIE1_MEM_PHYS2 CFG_PCIE1_MEM_BASE2
+#define CFG_PCIE1_MEM_SIZE2 0x04000000 /* 64M */
+#define CFG_PCIE1_IO_BASE 0x00000000 /* reuse mem LAW */
+#define CFG_PCIE1_IO_PHYS 0xaf000000
+#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */
+
+/* controller 3, direct to uli, tgtid 3, Base address b000 */
+#define CFG_PCIE3_MEM_BASE 0xb0000000
+#define CFG_PCIE3_MEM_PHYS CFG_PCIE3_MEM_BASE
+#define CFG_PCIE3_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCIE3_IO_BASE 0x00000000
+#define CFG_PCIE3_IO_PHYS 0xe3000000
+#define CFG_PCIE3_IO_SIZE 0x00100000 /* 1M */
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+#define CONFIG_RTL8139
+
+#ifdef CONFIG_RTL8139
+/* This macro is used by RTL8139 but not defined in PPC architecture */
+#define KSEG1ADDR(x) (x)
+#define _IO_BASE 0x00000000
+#endif
+
+#ifndef CONFIG_PCI_PNP
+ #define PCI_ENET0_IOADDR CFG_PCI1_IO_BASE
+ #define PCI_ENET0_MEMADDR CFG_PCI1_IO_BASE
+ #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */
+#endif
+
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SCSI_AHCI
+
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_SATA_ULI5288
+#define CFG_SCSI_MAX_SCSI_ID 4
+#define CFG_SCSI_MAX_LUN 1
+#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE
+#endif /* SCSCI */
+
+#endif /* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
+#define CONFIG_MPC85XX_TSEC1 1
+#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC1"
+#define CONFIG_MPC85XX_TSEC3 1
+#define CONFIG_MPC85XX_TSEC3_NAME "eTSEC3"
+#undef CONFIG_MPC85XX_FEC
+
+#define TSEC1_PHY_ADDR 0
+#define TSEC3_PHY_ADDR 1
+
+#define TSEC1_PHYIDX 0
+#define TSEC3_PHYIDX 0
+
+#define CONFIG_ETHPRIME "eTSEC1"
+
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+
+#endif /* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#if CFG_MONITOR_BASE > 0xfff80000
+#define CFG_ENV_ADDR 0xfff80000
+#else
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+#endif
+#define CFG_ENV_SIZE 0x2000
+#define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PCI \
+ | CFG_CMD_PING \
+ | CFG_CMD_I2C \
+ | CFG_CMD_MII \
+ | CFG_CMD_BEDBUG \
+ | CFG_CMD_NET)
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_I2C \
+ | CFG_CMD_MII)
+#endif
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR 00:E0:0C:02:00:FD
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD
+#endif
+
+#define CONFIG_IPADDR 192.168.1.251
+
+#define CONFIG_HOSTNAME 8544ds_unknown
+#define CONFIG_ROOTPATH /nfs/mpc85xx
+#define CONFIG_BOOTFILE 8544ds_tmt/uImage.uboot
+
+#define CONFIG_SERVERIP 192.168.0.1
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_NETMASK 255.255.0.0
+
+#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
+
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+
+#define CONFIG_BAUDRATE 115200
+
+#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3)
+#define PCIE_ENV \
+ "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
+ "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
+ "pcie1regs=setenv a e000a; run pciereg\0" \
+ "pcie2regs=setenv a e0009; run pciereg\0" \
+ "pcie3regs=setenv a e000b; run pciereg\0" \
+ "pcieerr=md ${a}020 1; md ${a}e00;" \
+ "pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
+ "pci d.w $b.0 56 1;" \
+ "pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \
+ "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff;" \
+ "pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff;" \
+ "pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \
+ "pci w $b.0 130 ffffffff\0" \
+ "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
+ "pcie1err=setenv a e000a; run pcieerr\0" \
+ "pcie2err=setenv a e0009; run pcieerr\0" \
+ "pcie3err=setenv a e000b; run pcieerr\0" \
+ "pcie1errc=setenv a e000a; run pcieerrc\0" \
+ "pcie2errc=setenv a e0009; run pcieerrc\0" \
+ "pcie3errc=setenv a e000b; run pcieerrc\0"
+#else
+#define PCIE_ENV ""
+#endif
+
+#if defined(CONFIG_PCI1)
+#define PCI_ENV \
+ "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
+ "echo e;md ${a}e00 9\0" \
+ "pci1regs=setenv a e0008; run pcireg\0" \
+ "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
+ "pci d.w $b.0 56 1\0" \
+ "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \
+ "pci w.w $b.0 56 ffff\0" \
+ "pci1err=setenv a e0008; run pcierr\0" \
+ "pci1errc=setenv a e0008; run pcierrc\0"
+#else
+#define PCI_ENV ""
+#endif
+
+#if defined(CONFIG_TSEC_ENET)
+#define ENET_ENV \
+ "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \
+ "md ${a}098 2\0" \
+ "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \
+ "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \
+ "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \
+ "echo mib;md ${a}680 31\0" \
+ "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \
+ "enet1regs=setenv a e0024; run enetreg\0" \
+ "enet3regs=setenv a e0026; run enetreg\0"
+#else
+#define ENET_ENV ""
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=8544ds_tmt/ramdisk.uboot\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=8544ds_tmt/mpc8544ds.dtb\0" \
+ "eoi=mw e00400b0 0\0" \
+ "iack=md e00400a0 1\0" \
+ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
+ "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
+ "ddrregs=setenv a e0002; run ddrreg\0" \
+ "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
+ "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
+ "guregs=setenv a e00e0; run gureg\0" \
+ "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
+ "ecmregs=setenv a e0001; run ecmreg\0" \
+ PCIE_ENV \
+ PCI_ENV \
+ ENET_ENV
+
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs root=/dev/sda3 rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 7c4849f..680009d 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -36,12 +36,12 @@
#define CONFIG_MPC8548 1 /* MPC8548 specific */
#define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */
-#undef CONFIG_PCI
+#define CONFIG_PCI
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_DLL /* possible DLL fix needed */
-#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+#undef CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
@@ -340,22 +340,34 @@
/*
* General PCI
- * Addresses are mapped 1-1.
+ * Memory space is mapped 1-1, but I/O space must start from 0.
*/
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
#define CFG_PCI1_IO_BASE 0x00000000
#define CFG_PCI1_IO_PHYS 0xe2000000
-#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
+#define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */
-#define CFG_PCI2_MEM_BASE 0xa0000000
+#define CFG_PCI2_MEM_BASE 0x90000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */
#define CFG_PCI2_IO_BASE 0x00000000
-#define CFG_PCI2_IO_PHYS 0xe2100000
-#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
+#define CFG_PCI2_IO_PHYS 0xe2800000
+#define CFG_PCI2_IO_SIZE 0x00800000 /* 8M */
+#define CFG_PEX_MEM_BASE 0xa0000000
+#define CFG_PEX_MEM_PHYS CFG_PEX_MEM_BASE
+#define CFG_PEX_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PEX_IO_BASE 0x00000000
+#define CFG_PEX_IO_PHYS 0xe3000000
+#define CFG_PEX_IO_SIZE 0x01000000 /* 16M */
+
+/*
+ * RapidIO MMU
+ */
+#define CFG_RIO_MEM_BASE 0xC0000000
+#define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */
#if defined(CONFIG_PCI)
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 835bf5c..21e6637 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -320,14 +320,14 @@
/*
* General PCI
- * Addresses are mapped 1-1.
+ * Memory space is mapped 1-1, but I/O space must start from 0.
*/
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PCI1_IO_BASE 0xe2000000
-#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x100000 /* 1M */
#if defined(CONFIG_PCI)
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
new file mode 100644
index 0000000..3f65644
--- /dev/null
+++ b/include/configs/MPC8568MDS.h
@@ -0,0 +1,505 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpc8568mds board configuration file
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE 1 /* BOOKE */
+#define CONFIG_E500 1 /* BOOKE e500 family */
+#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */
+#define CONFIG_MPC8568 1 /* MPC8568 specific */
+#define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */
+
+#undef CONFIG_PCI
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
+#define CONFIG_DDR_DLL /* possible DLL fix needed */
+/*#define CONFIG_DDR_2T_TIMING Sets the 2T timing bit */
+
+/*#define CONFIG_DDR_ECC*/ /* only for ECC DDR module */
+/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+
+
+/*
+ * When initializing flash, if we cannot find the manufacturer ID,
+ * assume this is the AMD flash associated with the MDS board.
+ * This allows booting from a promjet.
+ */
+#define CONFIG_ASSUME_AMD_FLASH
+
+#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_clock_freq(void);
+#endif /*Replace a call to get_clock_freq (after it is implemented)*/
+#define CONFIG_SYS_CLK_FREQ 66000000 /*TODO: restore if wanting to read from BCSR: get_clock_freq()*/ /* sysclk for MPC85xx */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+/*#define CONFIG_L2_CACHE*/ /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
+
+/*
+ * Only possible on E500 Version 2 or newer cores.
+ */
+#define CONFIG_ENABLE_36BIT_PHYS 1
+
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00400000
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
+#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
+
+#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
+
+/*
+ * Make sure required options are set
+ */
+#ifndef CONFIG_SPD_EEPROM
+#error ("CONFIG_SPD_EEPROM is required")
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+
+/*
+ * Local Bus Definitions
+ */
+
+/*
+ * FLASH on the Local Bus
+ * Two banks, 8M each, using the CFI driver.
+ * Boot from BR0/OR0 bank at 0xff00_0000
+ * Alternate BR1/OR1 bank at 0xff80_0000
+ *
+ * BR0, BR1:
+ * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
+ * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
+ * Port Size = 16 bits = BRx[19:20] = 10
+ * Use GPCM = BRx[24:26] = 000
+ * Valid = BRx[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
+ * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
+ *
+ * OR0, OR1:
+ * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
+ * Reserved ORx[17:18] = 11, confusion here?
+ * CSNT = ORx[20] = 1
+ * ACS = half cycle delay = ORx[21:22] = 11
+ * SCY = 6 = ORx[24:27] = 0110
+ * TRLX = use relaxed timing = ORx[29] = 1
+ * EAD = use external address latch delay = OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
+ */
+#define CFG_BCSR_BASE 0xf8000000
+
+#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH 32M */
+
+/*Chip select 0 - Flash*/
+#define CFG_BR0_PRELIM 0xfe001001
+#define CFG_OR0_PRELIM 0xfe006ff7
+
+/*Chip slelect 1 - BCSR*/
+#define CFG_BR1_PRELIM 0xf8000801
+#define CFG_OR1_PRELIM 0xffffe9f7
+
+/*#define CFG_FLASH_BANKS_LIST {0xff800000, CFG_FLASH_BASE} */
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 512 /* sectors per device */
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+
+/*
+ * SDRAM on the LocalBus
+ */
+#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
+
+
+/*Chip select 2 - SDRAM*/
+#define CFG_BR2_PRELIM 0xf0001861
+#define CFG_OR2_PRELIM 0xfc006901
+
+#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */
+#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
+#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
+#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
+#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
+#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
+
+/*
+ * Common settings for all Local Bus SDRAM commands.
+ * At run time, either BSMA1516 (for CPU 1.1)
+ * or BSMA1617 (for CPU 1.0) (old)
+ * is OR'ed in too.
+ */
+#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFCR16 \
+ | CFG_LBC_LSDMR_PRETOACT7 \
+ | CFG_LBC_LSDMR_ACTTORW7 \
+ | CFG_LBC_LSDMR_BL8 \
+ | CFG_LBC_LSDMR_WRC4 \
+ | CFG_LBC_LSDMR_CL3 \
+ | CFG_LBC_LSDMR_RFEN \
+ )
+
+/*
+ * The bcsr registers are connected to CS3 on MDS.
+ * The new memory map places bcsr at 0xf8000000.
+ *
+ * For BR3, need:
+ * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
+ * port-size = 8-bits = BR[19:20] = 01
+ * no parity checking = BR[21:22] = 00
+ * GPMC for MSEL = BR[24:26] = 000
+ * Valid = BR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
+ *
+ * For OR3, need:
+ * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0
+ * disable buffer ctrl OR[19] = 0
+ * CSNT OR[20] = 1
+ * ACS OR[21:22] = 11
+ * XACS OR[23] = 1
+ * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe
+ * SETA OR[28] = 0
+ * TRLX OR[29] = 1
+ * EHTR OR[30] = 1
+ * EAD extra time OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
+ */
+#define CFG_BCSR (0xf8000000)
+
+/*Chip slelect 4 - PIB*/
+#define CFG_BR4_PRELIM 0xf8008801
+#define CFG_OR4_PRELIM 0xffffe9f7
+
+/*Chip select 5 - PIB*/
+#define CFG_BR5_PRELIM 0xf8010801
+#define CFG_OR5_PRELIM 0xffff69f7
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser*/
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,8568@0"
+#define OF_SOC "soc8568@e0000000"
+#define OF_TBCLK (bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4600"
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support*/
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+
+/*
+ * General PCI
+ * Memory Addresses are mapped 1-1. I/O is mapped from 0
+ */
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */
+
+#define CFG_PEX_MEM_BASE 0xa0000000
+#define CFG_PEX_MEM_PHYS CFG_PEX_MEM_BASE
+#define CFG_PEX_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PEX_IO_BASE 0x00000000
+#define CFG_PEX_IO_PHYS 0xe2800000
+#define CFG_PEX_IO_SIZE 0x00800000 /* 8M */
+
+#define CFG_SRIO_MEM_BASE 0xc0000000
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
+
+#endif /* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_MPC85XX_TSEC1 1
+#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC0"
+#define CONFIG_MPC85XX_TSEC2 1
+#define CONFIG_MPC85XX_TSEC2_NAME "eTSEC1"
+#undef CONFIG_MPC85XX_TSEC3
+#undef CONFIG_MPC85XX_TSEC4
+#undef CONFIG_MPC85XX_FEC
+
+#define TSEC1_PHY_ADDR 2
+#define TSEC2_PHY_ADDR 3
+
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+
+/* Options are: eTSEC[0-3] */
+#define CONFIG_ETHPRIME "eTSEC0"
+
+#endif /* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+#define CFG_ENV_SIZE 0x2000
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PCI \
+ | CFG_CMD_PING \
+ | CFG_CMD_I2C \
+ | CFG_CMD_MII)
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_I2C \
+ | CFG_CMD_MII)
+#endif
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
+#endif
+
+#define CONFIG_IPADDR 192.168.1.253
+
+#define CONFIG_HOSTNAME unknown
+#define CONFIG_ROOTPATH /nfsroot
+#define CONFIG_BOOTFILE your.uImage
+
+#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK 255.255.255.0
+
+#define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/
+
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=600000\0" \
+ "ramdiskfile=your.ramdisk.u-boot\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=your.fdt.dtb\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs\0" \
+
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "run nfsargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "run ramargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/NC650.h b/include/configs/NC650.h
index 8da29c4..a12c8da 100644
--- a/include/configs/NC650.h
+++ b/include/configs/NC650.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2006 Detlev Zundel, dzu@denx.de
+ * (C) Copyright 2006, 2007 Detlev Zundel, dzu@denx.de
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
@@ -237,18 +237,8 @@
/*
* NAND flash support
*/
-#define CFG_NAND_LEGACY
-
#define CFG_MAX_NAND_DEVICE 1
-#define NAND_ChipID_UNKNOWN 0x00
-#define SECTORSIZE 512
-#define NAND_MAX_FLOORS 1
#define NAND_MAX_CHIPS 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-#define ADDR_COLUMN 1
-#define NAND_NO_RB
-
/*-----------------------------------------------------------------------
* SYPCR - System Protection Control 11-9
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index 9c241e6..7d91a01 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -160,7 +160,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
#endif
/*
* I2C configuration
diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h
deleted file mode 100644
index 8b46a17..0000000
--- a/include/configs/SBC8560.h
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * (C) Copyright 2002,2003 Motorola,Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
- * Added support for Wind River SBC8560 board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* mpc8560ads board configuration file */
-/* please refer to doc/README.mpc85xx for more info */
-/* make sure you change the MAC address and other network params first,
- * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if XXX
-#define DEBUG /* General debug */
-#define ET_DEBUG
-#endif
-#define TSEC_DEBUG
-
-/* High Level Configuration Options */
-#define CONFIG_BOOKE 1 /* BOOKE */
-#define CONFIG_E500 1 /* BOOKE e500 family */
-#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
-#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */
-
-
-#define CONFIG_CPM2 1 /* has CPM2 */
-#define CONFIG_SBC8560 1 /* configuration for SBC8560 board */
-
-#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific (supplement) */
-
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
-#undef CONFIG_PCI /* pci ethernet support */
-#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
-
-
-#define CONFIG_ENV_OVERWRITE
-
-/* Using Localbus SDRAM to emulate flash before we can program the flash,
- * normally you need a flash-boot image(u-boot.bin), if so undef this.
- */
-#undef CONFIG_RAM_AS_FLASH
-
-#if defined(CONFIG_PCI_66) /* some PCI card is 33Mhz only */
- #define CONFIG_SYS_CLK_FREQ 66000000/* sysclk for MPC85xx */
-#else
- #define CONFIG_SYS_CLK_FREQ 33000000/* most pci cards are 33Mhz */
-#endif
-
-/* below can be toggled for performance analysis. otherwise use default */
-#define CONFIG_L2_CACHE /* toggle L2 cache */
-#undef CONFIG_BTB /* toggle branch predition */
-#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-
-#undef CFG_DRAM_TEST /* memory test, takes time */
-#define CFG_MEMTEST_START 0x00200000 /* memtest region */
-#define CFG_MEMTEST_END 0x00400000
-
-#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
- defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
- defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
-#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
-#endif
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-
-#if XXX
- #define CFG_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */
-#else
- #define CFG_CCSRBAR 0xff700000 /* default CCSRBAR */
-#endif
-#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
-
-#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
-#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
-#define CFG_SDRAM_SIZE 512 /* DDR is 512MB */
-#define SPD_EEPROM_ADDRESS 0x55 /* DDR DIMM */
-
-#undef CONFIG_DDR_ECC /* only for ECC DDR module */
-#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
-
-#if defined(CONFIG_MPC85xx_REV1)
- #define CONFIG_DDR_DLL /* possible DLL fix needed */
-#endif
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-#if defined(CONFIG_RAM_AS_FLASH)
- #define CFG_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */
- #define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 8M */
- #define CFG_BR0_PRELIM 0xf8000801 /* port size 8bit */
- #define CFG_OR0_PRELIM 0xf8000ff7 /* 8MB Flash */
-#else /* Boot from real Flash */
- #define CFG_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */
- #define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */
- #define CFG_BR0_PRELIM 0xff800801 /* port size 8bit */
- #define CFG_OR0_PRELIM 0xff800ff7 /* 8MB Flash */
-#endif
-#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
-
-/* local bus definitions */
-#define CFG_BR1_PRELIM 0xe4001801 /* 64M, 32-bit flash */
-#define CFG_OR1_PRELIM 0xfc000ff7
-
-#define CFG_BR2_PRELIM 0x00000000 /* CS2 not used */
-#define CFG_OR2_PRELIM 0x00000000
-
-#define CFG_BR3_PRELIM 0xf0001861 /* 64MB localbus SDRAM */
-#define CFG_OR3_PRELIM 0xfc000cc1
-
-#if defined(CONFIG_RAM_AS_FLASH)
- #define CFG_BR4_PRELIM 0xf4001861 /* 64M localbus SDRAM */
-#else
- #define CFG_BR4_PRELIM 0xf8001861 /* 64M localbus SDRAM */
-#endif
-#define CFG_OR4_PRELIM 0xfc000cc1
-
-#define CFG_BR5_PRELIM 0xfc000801 /* 16M CS5 misc devices */
-#if 1
- #define CFG_OR5_PRELIM 0xff000ff7
-#else
- #define CFG_OR5_PRELIM 0xff0000f0
-#endif
-
-#define CFG_BR6_PRELIM 0xe0001801 /* 64M, 32-bit flash */
-#define CFG_OR6_PRELIM 0xfc000ff7
-#define CFG_LBC_LCRR 0x00030002 /* local bus freq */
-#define CFG_LBC_LBCR 0x00000000
-#define CFG_LBC_LSRT 0x20000000
-#define CFG_LBC_MRTPR 0x20000000
-#define CFG_LBC_LSDMR_1 0x2861b723
-#define CFG_LBC_LSDMR_2 0x0861b723
-#define CFG_LBC_LSDMR_3 0x0861b723
-#define CFG_LBC_LSDMR_4 0x1861b723
-#define CFG_LBC_LSDMR_5 0x4061b723
-
-/* just hijack the MOT BCSR def for SBC8560 misc devices */
-#define CFG_BCSR ((CFG_BR5_PRELIM & 0xff000000)|0x00400000)
-/* the size of CS5 needs to be >= 16M for TLB and LAW setups */
-
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 1
-#define CFG_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
-
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
-
-/* Serial Port */
-#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else */
-
-#define CONFIG_CONS_INDEX 1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
-#define CFG_NS16550_CLK 1843200 /* get_bus_freq(0) */
-#define CONFIG_BAUDRATE 9600
-
-#define CFG_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CFG_NS16550_COM1 ((CFG_BR5_PRELIM & 0xff000000)+0x00700000)
-#define CFG_NS16550_COM2 ((CFG_BR5_PRELIM & 0xff000000)+0x00800000)
-
-/* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
-#endif
-
-/* I2C */
-#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
-
-#define CFG_PCI_MEM_BASE 0xC0000000
-#define CFG_PCI_MEM_PHYS 0xC0000000
-#define CFG_PCI_MEM_SIZE 0x10000000
-
-#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */
-
-# define CONFIG_NET_MULTI 1
-# define CONFIG_MII 1 /* MII PHY management */
-# define CONFIG_MPC85xx_TSEC1
-# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0"
-# define TSEC1_PHY_ADDR 25
-# define TSEC1_PHYIDX 0
-/* Options are: TSEC0 */
-# define CONFIG_ETHPRIME "TSEC0"
-
-
-#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
-
- #undef CONFIG_ETHER_NONE /* define if ether on something else */
- #define CONFIG_ETHER_ON_FCC2 /* cpm FCC ethernet support */
- #define CONFIG_ETHER_INDEX 2 /* which channel for ether */
-
- #if (CONFIG_ETHER_INDEX == 2)
- /*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
- * - Select bus for bd/buffers
- * - Full duplex
- */
- #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
- #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
- #define CFG_CPMFCR_RAMTYPE 0
- #define CFG_FCC_PSMR (FCC_PSMR_FDE)
-
- #elif (CONFIG_ETHER_INDEX == 3)
- /* need more definitions here for FE3 */
- #endif /* CONFIG_ETHER_INDEX */
-
- #define CONFIG_MII /* MII PHY management */
- #define CONFIG_BITBANGMII /* bit-bang MII PHY management */
- /*
- * GPIO pins used for bit-banged MII communications
- */
- #define MDIO_PORT 2 /* Port C */
- #define MDIO_ACTIVE (iop->pdir |= 0x00400000)
- #define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
- #define MDIO_READ ((iop->pdat & 0x00400000) != 0)
-
- #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
- else iop->pdat &= ~0x00400000
-
- #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \
- else iop->pdat &= ~0x00200000
-
- #define MIIDELAY udelay(1)
-
-#endif
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#if 0
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CFG_FLASH_PROTECTION /* use hardware protection */
-#endif
-#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-
-#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
-
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
-
-#if 0
-/* XXX This doesn't work and I don't want to fix it */
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
- #define CFG_RAMBOOT
-#else
- #undef CFG_RAMBOOT
-#endif
-#endif
-
-/* Environment */
-#if !defined(CFG_RAMBOOT)
- #if defined(CONFIG_RAM_AS_FLASH)
- #define CFG_ENV_IS_NOWHERE
- #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x100000)
- #define CFG_ENV_SIZE 0x2000
- #else
- #define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
- #define CFG_ENV_SIZE 0x2000 /* CFG_ENV_SECT_SIZE */
- #endif
-#else
- #define CFG_NO_FLASH 1 /* Flash is not usable now */
- #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
- #define CFG_ENV_SIZE 0x2000
-#endif
-
-#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
-/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000"
-#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \
- CFG_CMD_PING | CFG_CMD_I2C) & \
- ~(CFG_CMD_ENV | \
- CFG_CMD_LOADS ))
- #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \
- CFG_CMD_PING | CFG_CMD_I2C) & \
- ~(CFG_CMD_ENV))
- #endif
-#else
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \
- CFG_CMD_PING | CFG_CMD_I2C)
- #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \
- CFG_CMD_PING | CFG_CMD_I2C)
- #endif
-#endif
-
-#include <cmd_confdefs.h>
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "SBC8560=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
- #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
- #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR 0x1000000 /* default load address */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
- #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
- #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
- #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*Note: change below for your network setting!!! */
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-# define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a
-# define CONFIG_HAS_ETH1
-# define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b
-# define CONFIG_HAS_ETH2
-# define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c
-#endif
-
-#define CONFIG_SERVERIP YourServerIP
-#define CONFIG_IPADDR YourTargetIP
-#define CONFIG_GATEWAYIP YourGatewayIP
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_HOSTNAME SBC8560
-#define CONFIG_ROOTPATH YourRootPath
-#define CONFIG_BOOTFILE YourImageName
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 8a6e5a6..b42cfb6 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -200,17 +200,17 @@
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
/*
* PCI Bus clocking configuration
*
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
*/
-#define CFG_PCISPEED_66 /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
#endif
/*
@@ -432,7 +432,7 @@
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
#else
#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index f41dbd0..1cc9ce9 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -186,7 +186,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
/*
* I2C configuration
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 7069b35..7935593 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -269,17 +269,17 @@
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#if defined(CFG_IPBSPEED_133) && !defined(CONFIG_CAM5200)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200)
/*
* PCI Bus clocking configuration
*
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of
+ * 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
*/
-#define CFG_PCISPEED_66 /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
#endif
/*
@@ -594,7 +594,7 @@
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
#else
#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 8175703..d8686dd 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -183,7 +183,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
#endif
/*
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index 35b6a51..c72d933 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -34,7 +34,9 @@
#define CONFIG_ACADIA 1 /* Board is Acadia */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_405EZ 1 /* Specifc 405EZ support*/
-#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
+/* Detect Acadia PLL input clock automatically via CPLD bit */
+#define CONFIG_SYS_CLK_FREQ ((in8(CFG_CPLD_BASE + 0) == 0x0c) ? \
+ 66666666 : 33333000)
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_F 1 /* Call misc_init_f */
@@ -224,16 +226,6 @@
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
-#if 0 /* test-only */
-#define TEST_ONLY_NAND
-#endif
-
-#ifdef TEST_ONLY_NAND
-#define CMD_NAND CFG_CMD_NAND
-#else
-#define CMD_NAND 0
-#endif
-
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -252,7 +244,7 @@
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
CFG_CMD_MII | \
- CMD_NAND | \
+ CFG_CMD_NAND | \
CFG_CMD_NET | \
CFG_CMD_NFS | \
CFG_CMD_PCI | \
@@ -300,7 +292,6 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-#ifdef TEST_ONLY_NAND
/*-----------------------------------------------------------------------
* NAND FLASH
*----------------------------------------------------------------------*/
@@ -308,7 +299,6 @@
#define NAND_MAX_CHIPS 1
#define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS)
#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
-#endif
/*-----------------------------------------------------------------------
* Cache Configuration
@@ -322,7 +312,7 @@
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
-#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
+#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
/* Memory Bank 0 (Flash) initialization */
#define CFG_EBC_PB0AP 0x03337200
@@ -358,7 +348,8 @@
/*-----------------------------------------------------------------------
* Definitions for GPIO_0 setup (PPC405EZ specific)
*
- * GPIO0[0-3] - External Bus Controller CS_4 - CS_7 Outputs
+ * GPIO0[0-2] - External Bus Controller CS_4 - CS_6 Outputs
+ * GPIO0[3] - NAND FLASH Controller CE3 (NFCE3) Output
* GPIO0[4] - External Bus Controller Hold Input
* GPIO0[5] - External Bus Controller Priority Input
* GPIO0[6] - External Bus Controller HLDA Output
@@ -376,10 +367,10 @@
*/
#define CFG_GPIO0_TCR 0xC0000000
#define CFG_GPIO0_OSRL 0x50000000
-#define CFG_GPIO0_OSRH 0x00000055
+#define CFG_GPIO0_OSRH 0x02000055
#define CFG_GPIO0_ISR1L 0x00000000
#define CFG_GPIO0_ISR1H 0x00000055
-#define CFG_GPIO0_TSRL 0x00000000
+#define CFG_GPIO0_TSRL 0x02000000
#define CFG_GPIO0_TSRH 0x00000055
/*-----------------------------------------------------------------------
diff --git a/include/configs/aev.h b/include/configs/aev.h
index 8d9f0a1..6c2a360 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -166,17 +166,17 @@
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
/*
* PCI Bus clocking configuration
*
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
*/
-#define CFG_PCISPEED_66 /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
#endif
/*
@@ -362,7 +362,7 @@
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
#else
#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 458ebab..beaf385 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -62,11 +62,14 @@
*/
#define CFG_PLL0_OPT 0x04
-#define CFG_USART1 1
-
-#define CFG_CONSOLE_UART_DEV DEVICE_USART1
+#undef CONFIG_USART0
+#define CONFIG_USART1 1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION 1
+
#define CONFIG_CMDLINE_TAG 1
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
@@ -75,16 +78,47 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
- "console=ttyUS0 root=/dev/mtdblock1 fbmem=600k"
+ "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2 fbmem=600k"
+
+#define CONFIG_BOOTCOMMAND \
+ "fsload; bootm $(fileaddr)"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY 2
+#define CONFIG_AUTOBOOT 1
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * These are "locally administered ethernet addresses" generated by
+ * ./tools/gen_eth_addr
+ *
+ * After booting the board for the first time, new addresses should be
+ * generated and assigned to the environment variables "ethaddr" and
+ * "eth1addr".
+ */
+#define CONFIG_ETHADDR "6a:87:71:14:cd:cb"
+#define CONFIG_ETH1ADDR "ca:f8:15:e6:3e:e6"
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+#define CONFIG_NET_MULTI 1
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_SUBNETMASK \
+ | CONFIG_BOOTP_GATEWAY)
#define CONFIG_COMMANDS (CFG_CMD_BDI \
| CFG_CMD_LOADS \
| CFG_CMD_LOADB \
- /* | CFG_CMD_IMI */ \
+ | CFG_CMD_IMI \
/* | CFG_CMD_CACHE */ \
| CFG_CMD_FLASH \
| CFG_CMD_MEMORY \
- /* | CFG_CMD_NET */ \
+ | CFG_CMD_NET \
| CFG_CMD_ENV \
/* | CFG_CMD_IRQ */ \
| CFG_CMD_BOOTD \
@@ -96,7 +130,7 @@
/* | CFG_CMD_I2C */ \
| CFG_CMD_REGINFO \
/* | CFG_CMD_DATE */ \
- /* | CFG_CMD_DHCP */ \
+ | CFG_CMD_DHCP \
/* | CFG_CMD_AUTOSCRIPT */ \
/* | CFG_CMD_MII */ \
| CFG_CMD_MISC \
@@ -106,19 +140,22 @@
/* | CFG_CMD_SAVES */ \
/* | CFG_CMD_SPI */ \
/* | CFG_CMD_PING */ \
- /* | CFG_CMD_MMC */ \
- /* | CFG_CMD_FAT */ \
- /* | CFG_CMD_IMLS */ \
+ | CFG_CMD_MMC \
+ | CFG_CMD_FAT \
+ | CFG_CMD_IMLS \
/* | CFG_CMD_ITEST */ \
- /* | CFG_CMD_EXT2 */ \
+ | CFG_CMD_EXT2 \
+ | CFG_CMD_JFFS2 \
)
#include <cmd_confdefs.h>
#define CONFIG_ATMEL_USART 1
+#define CONFIG_MACB 1
#define CONFIG_PIO2 1
#define CFG_NR_PIOS 5
#define CFG_HSDRAMC 1
+#define CONFIG_MMC 1
#define CFG_DCACHE_LINESZ 32
#define CFG_ICACHE_LINESZ 32
@@ -150,16 +187,8 @@
#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
#define CFG_MALLOC_LEN (256*1024)
-#define CFG_MALLOC_END \
- ({ \
- DECLARE_GLOBAL_DATA_PTR; \
- CFG_SDRAM_BASE + gd->sdram_size; \
- })
-#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN)
-
#define CFG_DMA_ALLOC_LEN (16384)
-#define CFG_DMA_ALLOC_END (CFG_MALLOC_START)
-#define CFG_DMA_ALLOC_START (CFG_DMA_ALLOC_END - CFG_DMA_ALLOC_LEN)
+
/* Allow 2MB for the kernel run-time image */
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index 2c160a4..ec6d57e 100644
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -111,7 +111,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
/*
* Flash configuration, expect one 16 Megabyte Bank at most
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index f9586fb..f5efcd9 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -179,7 +179,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
#endif
/*
* I2C configuration
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 91284fd..1568120 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -188,7 +188,6 @@
/*
* NAND Flash
*/
-/* Use the new NAND code. (BOARDLIBS = drivers/nand/libnand.a required) */
#undef CFG_NAND_LEGACY
#define CFG_NAND0_BASE 0x0 /* 0x43100040 */ /* 0x10000000 */
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index 095b5f6..4d813d8 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -110,7 +110,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
/*
* I2C configuration
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 773d5d2..ad3cf06 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -147,7 +147,7 @@
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
/*
* Flash configuration
diff --git a/include/configs/luan.h b/include/configs/luan.h
index 9c8769b..045a144 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -135,7 +135,8 @@
*----------------------------------------------------------------------*/
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/
-#undef CONFIG_DDR_ECC /* no ECC support for now */
+#define CONFIG_DDR_ECC 1 /* with ECC support */
+#define CFG_44x_DDR2_CKTR_180 1 /* use 180 deg advance */
/*-----------------------------------------------------------------------
* I2C
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index 621a81c..c2324a0 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -169,7 +169,7 @@
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
/*
* I2C configuration
diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index cb159e7..3db2877 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -28,6 +28,7 @@
#include "../board/xilinx/ml401/xparameters.h"
#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */
+#define MICROBLAZE_V5 1
#define CONFIG_ML401 1 /* ML401 Board */
/* uart */
@@ -36,11 +37,11 @@
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
/* setting reset address */
-#define CFG_RESET_ADDRESS TEXT_BASE
+/*#define CFG_RESET_ADDRESS TEXT_BASE*/
/* ethernet */
#define CONFIG_EMACLITE 1
-#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES
+#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
/* gpio */
#define CFG_GPIO_0 1
@@ -58,6 +59,10 @@
#define FREQUENCE XILINX_CLOCK_FREQ
#define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 )
+/* FSL */
+#define CFG_FSL_2
+#define FSL_INTR_2 1
+
/*
* memory layout - Example
* TEXT_BASE = 0x1200_0000;
@@ -93,7 +98,8 @@
/* global pointer */
#define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */
-#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */
+/* start of global data */
+#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
/* monitor code */
#define SIZE 0x40000
@@ -117,6 +123,7 @@
#define CFG_FLASH_EMPTY_INFO 1 /* ?empty sector */
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+ #define CFG_FLASH_PROTECTION /* hardware flash protection */
#ifdef RAMENV
#define CFG_ENV_IS_NOWHERE 1
@@ -135,6 +142,7 @@
#define CFG_ENV_IS_NOWHERE 1
#define CFG_ENV_SIZE 0x1000
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE)
+ #define CFG_FLASH_PROTECTION /* hardware flash protection */
#endif /* !FLASH */
#ifdef FLASH
@@ -152,8 +160,13 @@
CFG_CMD_IMI |\
CFG_CMD_NET |\
CFG_CMD_CACHE |\
+ CFG_CMD_FAT |\
+ CFG_CMD_EXT2 |\
+ CFG_CMD_JFFS2 |\
+ CFG_CMD_ECHO |\
CFG_CMD_IMLS |\
CFG_CMD_FLASH |\
+ CFG_CMD_MFSL |\
CFG_CMD_PING \
)
#else /* !RAMENV */
@@ -174,6 +187,11 @@
CFG_CMD_FLASH |\
CFG_CMD_PING |\
CFG_CMD_ENV |\
+ CFG_CMD_FAT |\
+ CFG_CMD_EXT2 |\
+ CFG_CMD_JFFS2 |\
+ CFG_CMD_ECHO |\
+ CFG_CMD_MFSL |\
CFG_CMD_SAVES \
)
@@ -189,16 +207,30 @@
CFG_CMD_BDI |\
CFG_CMD_RUN |\
CFG_CMD_LOADS |\
+ CFG_CMD_FAT |\
+ CFG_CMD_EXT2 |\
CFG_CMD_LOADB |\
CFG_CMD_IMI |\
CFG_CMD_NET |\
CFG_CMD_CACHE |\
+ CFG_CMD_MFSL |\
CFG_CMD_PING \
)
#endif /* !FLASH */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+/* JFFS2 partitions */
+#define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */
+#define MTDIDS_DEFAULT "nor0=ml401-0"
+
+/* default mtd partition table */
+#define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\
+ "256k(env),3m(kernel),1m(romfs),"\
+ "1m(cramfs),-(jffs2)"
+#endif
+
/* Miscellaneous configurable options */
#define CFG_PROMPT "U-Boot-mONStR> "
#define CFG_CBSIZE 512 /* size of console buffer */
@@ -207,7 +239,7 @@
#define CFG_LONGHELP
#define CFG_LOAD_ADDR 0x12000000 /* default load address */
-#define CONFIG_BOOTDELAY 30
+#define CONFIG_BOOTDELAY 30
#define CONFIG_BOOTARGS "root=romfs"
#define CONFIG_HOSTNAME "ml401"
#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
@@ -221,10 +253,19 @@
#define CFG_HZ 1000
/* system ace */
-/*#define CONFIG_SYSTEMACE
-#define DEBUG_SYSTEMACE
-#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
-#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
-#define CONFIG_DOS_PARTITION
-*/
+#define CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+#define SYSTEMACE_CONFIG_FPGA
+#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
+#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo"
+
+#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\
+ "nor0=ml401-0\0"\
+ "mtdparts=mtdparts=ml401-0:"\
+ "256k(u-boot),256k(env),3m(kernel),"\
+ "1m(romfs),1m(cramfs),-(jffs2)\0"
+
#endif /* __CONFIG_H */
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index 5328e8d..e3899a5 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -26,12 +26,10 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-
/*
* High Level Configuration Options
*/
-
/* CPU and board */
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */
@@ -50,7 +48,14 @@
CFG_CMD_MII | \
CFG_CMD_BEDBUG | \
CFG_CMD_NET | \
- CFG_CMD_PING)
+ CFG_CMD_PING | \
+ CFG_CMD_IDE | \
+ CFG_CMD_FAT | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_I2C | \
+ CFG_CMD_DATE | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_DTT)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -71,7 +76,7 @@
#define CONFIG_MPC5xxx_FEC 1
#define CONFIG_PHY_ADDR 0x2
#define CONFIG_PHY_TYPE 0x79c874
-
+#define CONFIG_RESET_PHY_R 1
/*
* Autobooting
@@ -94,42 +99,51 @@
* Default environment settings
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
- "sdram_test=0\0" \
"netdev=eth0\0" \
"hostname=motionpro\0" \
"netmask=255.255.0.0\0" \
"ipaddr=192.168.160.22\0" \
"serverip=192.168.1.1\0" \
"gatewayip=192.168.1.1\0" \
- "kernel_addr=200000\0" \
+ "console=ttyPSC0,115200\0" \
"u-boot_addr=100000\0" \
- "kernel_sector=20\0" \
- "kernel_size=1000\0" \
- "console=ttyS0,115200\0" \
+ "kernel_addr=200000\0" \
+ "fdt_addr=400000\0" \
+ "ramdisk_addr=500000\0" \
+ "multi_image_addr=800000\0" \
"rootpath=/opt/eldk-4.1/ppc_6xx\0" \
- "bootfile=/tftpboot/motionpro/uImage\0" \
"u-boot=/tftpboot/motionpro/u-boot.bin\0" \
- "load=tftp $(u-boot_addr) $(u-boot)\0" \
+ "bootfile=/tftpboot/motionpro/uImage\0" \
+ "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \
+ "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \
+ "multi_image_file=kernel+initrd+dtb.img\0" \
+ "load=tftp ${u-boot_addr} ${u-boot}\0" \
"update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \
- "cp.b $(u-boot_addr) fff00000 $(filesize);" \
+ "cp.b ${u-boot_addr} fff00000 ${filesize};" \
"prot on fff00000 fff3ffff\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs $(bootargs) console=$(console) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):" \
- "$(netmask):$(hostname):$(netdev):off panic=1\0" \
- "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \
- "flash_self=run ramargs addip;bootm $(kernel_addr) " \
- "$(ramdisk_addr)\0" \
- "net_nfs=tftp $(kernel_addr) $(bootfile); run nfsargs addip; " \
- "bootm $(kernel_addr)\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$(serverip):$(rootpath)\0" \
- "fstype=ext3\0" \
- "fatargs=setenv bootargs init=/linuxrc rw\0" \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "fat_args=setenv bootargs rw\0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:" \
+ "${netmask}:${hostname}:${netdev}:off panic=1 " \
+ "console=${console}\0" \
+ "net_nfs=tftp ${kernel_addr} ${bootfile}; " \
+ "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip; " \
+ "bootm ${kernel_addr} - ${fdt_addr}\0" \
+ "net_self=tftp ${kernel_addr} ${bootfile}; " \
+ "tftp ${fdt_addr} ${fdt_file}; " \
+ "tftp ${ramdisk_addr} ${ramdisk_file}; " \
+ "run ramargs addip; " \
+ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
+ "fat_multi=run fat_args addip; fatload ide 0:1 " \
+ "${multi_image_addr} ${multi_image_file}; " \
+ "bootm ${multi_image_addr}\0" \
""
#define CONFIG_BOOTCOMMAND "run net_nfs"
-
/*
* do board-specific init
*/
@@ -148,6 +162,12 @@
/*
+ * Set IPB speed to 100MHz
+ */
+#define CFG_IPBCLK_EQUALS_XLBCLK
+
+
+/*
* Memory map
*/
/*
@@ -243,6 +263,84 @@
#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */
#define CONFIG_FLASH_16BIT /* Flash is 16-bit */
+/*
+ * MTD configuration
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=motionpro-0"
+#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \
+ "13m(fs),2m(kernel),256k(uboot)," \
+ "64k(env),64k(redund_env),64k(dtb)," \
+ "-(user_data)"
+
+/*
+ * IDE/ATA configuration
+ */
+#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
+#define CFG_IDE_MAXBUS 1
+#define CFG_IDE_MAXDEVICE 1
+#define CONFIG_IDE_PREINIT
+
+#define CFG_ATA_DATA_OFFSET 0x0060
+#define CFG_ATA_REG_OFFSET CFG_ATA_DATA_OFFSET
+#define CFG_ATA_STRIDE 4
+#define CONFIG_DOS_PARTITION
+
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_MODULE 2 /* select I2C module #2 */
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* DTT driver needs this */
+#define CFG_EEPROM_PAGE_WRITE_BITS 1 /* 2 bytes per write cycle */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 5 /* 2ms/cycle + 3ms extra */
+#define CFG_I2C_MULTI_EEPROMS 1 /* 2 EEPROMs (addr:50,52) */
+
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_DS1337 1
+#define CFG_I2C_RTC_ADDR 0x68
+
+
+/*
+ * Status LED configuration
+ */
+#define CONFIG_STATUS_LED /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED
+
+#define ENABLE_GPIO_OUT 0x00000024
+#define LED_ON 0x00000010
+
+#ifndef __ASSEMBLY__
+/*
+ * In case of Motion-PRO, a LED is identified by its corresponding
+ * GPT Enable and Mode Select Register.
+ */
+typedef volatile unsigned long * led_id_t;
+
+extern void __led_init(led_id_t id, int state);
+extern void __led_toggle(led_id_t id);
+extern void __led_set(led_id_t id, int state);
+#endif /* __ASSEMBLY__ */
+
+
+/*
+ * Temperature sensor
+ */
+#define CONFIG_DTT_LM75 1
+#define CONFIG_DTT_SENSORS { 0x49 }
+
/*
* Environment settings
@@ -253,6 +351,9 @@
#define CFG_ENV_SIZE 0x1000
#define CFG_ENV_SECT_SIZE 0x10000
+/* Configuration of redundant environment */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
/*
* Pin multiplexing configuration
@@ -270,11 +371,17 @@
/*
+ * Motion-PRO's CPLD revision control register
+ */
+#define CPLD_REV_REGISTER (CFG_CS2_START + 0x06)
+
+
+/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
@@ -302,4 +409,15 @@
/* Not needed for MPC 5xxx U-Boot, but used by tools/updater */
#define CFG_RESET_ADDRESS 0xfff00100
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+#define OF_CPU "PowerPC,5200@0"
+#define OF_SOC "soc5200@f0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
+
#endif /* __CONFIG_H */
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
new file mode 100644
index 0000000..243a3f6
--- /dev/null
+++ b/include/configs/mpc7448hpc2.h
@@ -0,0 +1,411 @@
+/*
+ * Copyright (c) 2005 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2006
+ * Alex Bounine , Tundra Semiconductor Corp.
+ * Roy Zang , <tie-fei.zang@freescale.com> Freescale Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board specific configuration options for Freescale
+ * MPC7448HPC2 (High-Performance Computing II) (Taiga) board
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/* Board Configuration Definitions */
+/* MPC7448HPC2 (High-Performance Computing II) (Taiga) board */
+
+#define CONFIG_MPC7448HPC2
+
+#define CONFIG_74xx
+#define CONFIG_750FX /* this option to enable init of extended BATs */
+#define CONFIG_ALTIVEC /* undef to disable */
+
+#define CFG_BOARD_NAME "MPC7448 HPC II"
+#define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II"
+
+#define CFG_OCN_CLK 133000000 /* 133 MHz */
+#define CFG_CONFIG_BUS_CLK 133000000
+
+#define CFG_CLK_SPREAD /* Enable Spread-Spectrum Clock generation */
+
+#undef CONFIG_ECC /* disable ECC support */
+
+/* Board-specific Initialization Functions to be called */
+#define CFG_BOARD_ASM_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_HAS_ETH1
+
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */
+
+/*#define CFG_HUSH_PARSER */
+#undef CFG_HUSH_PARSER
+
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,7448@0"
+#define OF_TSI "tsi108@c0000000"
+#define OF_TBCLK (bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH "/tsi108@c0000000/serial@7808"
+
+/*
+ * The following defines let you select what serial you want to use
+ * for your console driver.
+ *
+ * what to do:
+ * If you have hacked a serial cable onto the second DUART channel,
+ * change the CFG_DUART port from 1 to 0 below.
+ *
+ */
+
+#define CONFIG_CONS_INDEX 1
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK CFG_OCN_CLK * 8
+
+#define CFG_NS16550_COM1 (CFG_TSI108_CSR_RST_BASE+0x7808)
+#define CFG_NS16550_COM2 (CFG_TSI108_CSR_RST_BASE+0x7C08)
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#undef CONFIG_BOOTARGS
+/* #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\"
+ * to mount root filesystem over NFS;echo" */
+
+#if (CONFIG_BOOTDELAY >= 0)
+#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 zImage.initrd.elf;\
+ setenv bootargs $(bootargs) $(bootargs_root) nfsroot=$(serverip):$(rootpath) \
+ ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000; "
+
+#define CONFIG_BOOTARGS "console=ttyS0,115200"
+#endif
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+
+#define CONFIG_SERIAL "No. 1"
+
+/* Networking Configuration */
+
+#define KSEG1ADDR(a) (a) /* Needed by the rtl8139 driver */
+
+#define CONFIG_TSI108_ETH
+#define CONFIG_TSI108_ETH_NUM_PORTS 2
+
+#define CONFIG_NET_MULTI
+
+#define CONFIG_BOOTFILE zImage.initrd.elf
+#define CONFIG_LOADADDR 0x400000
+
+/*-------------------------------------------------------------------------- */
+
+#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
+#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
+ CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_ASKENV \
+ | CFG_CMD_CACHE \
+ | CFG_CMD_PCI \
+ | CFG_CMD_I2C \
+ | CFG_CMD_SDRAM \
+ | CFG_CMD_EEPROM \
+ | CFG_CMD_FLASH \
+ | CFG_CMD_ENV \
+ | CFG_CMD_BSP \
+ | CFG_CMD_DHCP \
+ | CFG_CMD_PING \
+ | CFG_CMD_DATE)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*set date in u-boot*/
+#define CONFIG_RTC_M48T35A
+#define CFG_NVRAM_BASE_ADDR 0xfc000000
+#define CFG_NVRAM_SIZE 0x8000
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_VERSION_VARIABLE 1
+#define CONFIG_TSI108_I2C
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)/* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x00400000 /* default load address */
+
+#define CFG_HZ 1000 /* decr freq: 1ms ticks */
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+
+/*
+ * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
+ * To an unused memory region. The stack will remain in cache until RAM
+ * is initialized
+ */
+#undef CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR 0x07d00000 /* unused memory region */
+#define CFG_INIT_RAM_END 0x4000/* larger space - we have SDRAM initialized */
+
+#define CFG_GBL_DATA_SIZE 128/* size in bytes reserved for init data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+
+#define CFG_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */
+#define CFG_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */
+
+#define CFG_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */
+#define CFG_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */
+
+#define CFG_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
+
+#define CFG_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
+
+#define CFG_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */
+
+#define CFG_FLASH_BASE 0xff000000 /* Base Address of Flash device */
+#define CFG_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */
+
+#define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS */
+
+#define PCI0_IO_BASE_BOOTM 0xfd000000
+
+#define CFG_RESET_ADDRESS 0x3fffff00
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* u-boot code base */
+#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
+
+/* Peripheral Device section */
+
+/*
+ * Resources on the Tsi108
+ */
+
+#define CFG_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */
+#define CFG_TSI108_CSR_BASE CFG_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */
+
+#define ENABLE_PCI_CSR_BAR /* enables access to Tsi108 CSRs from the PCI/X bus */
+
+#undef DISABLE_PBM
+
+/*
+ * PCI stuff
+ *
+ */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_TSI108_PCI /* include tsi108 pci support */
+
+#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+/* PCI MEMORY MAP section */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x80000000
+
+/* PCI Memory Space */
+#define CFG_PCI_MEM_BUS (CFG_PCI_MEM_PHYS)
+#define CFG_PCI_MEM_PHYS (CFG_PCI_MEM32_BASE) /* 0xE0000000 */
+#define CFG_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */
+
+/* PCI I/O Space */
+#define CFG_PCI_IO_BUS 0x00000000
+#define CFG_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */
+
+#define CFG_PCI_IO_SIZE 0x01000000 /* 16MB */
+
+#define _IO_BASE 0x00000000 /* points to PCI I/O space */
+
+/* PCI Config Space mapping */
+#define CFG_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */
+#define CFG_PCI_CFG_SIZE 0x01000000 /* 16MB */
+
+#define CFG_IBAT0U 0xFE0003FF
+#define CFG_IBAT0L 0xFE000002
+
+#define CFG_IBAT1U 0x00007FFF
+#define CFG_IBAT1L 0x00000012
+
+#define CFG_IBAT2U 0x80007FFF
+#define CFG_IBAT2L 0x80000022
+
+#define CFG_IBAT3U 0x00000000
+#define CFG_IBAT3L 0x00000000
+
+#define CFG_IBAT4U 0x00000000
+#define CFG_IBAT4L 0x00000000
+
+#define CFG_IBAT5U 0x00000000
+#define CFG_IBAT5L 0x00000000
+
+#define CFG_IBAT6U 0x00000000
+#define CFG_IBAT6L 0x00000000
+
+#define CFG_IBAT7U 0x00000000
+#define CFG_IBAT7L 0x00000000
+
+#define CFG_DBAT0U 0xE0003FFF
+#define CFG_DBAT0L 0xE000002A
+
+#define CFG_DBAT1U 0x00007FFF
+#define CFG_DBAT1L 0x00000012
+
+#define CFG_DBAT2U 0x00000000
+#define CFG_DBAT2L 0x00000000
+
+#define CFG_DBAT3U 0xC0000003
+#define CFG_DBAT3L 0xC000002A
+
+#define CFG_DBAT4U 0x00000000
+#define CFG_DBAT4L 0x00000000
+
+#define CFG_DBAT5U 0x00000000
+#define CFG_DBAT5L 0x00000000
+
+#define CFG_DBAT6U 0x00000000
+#define CFG_DBAT6L 0x00000000
+
+#define CFG_DBAT7U 0x00000000
+#define CFG_DBAT7L 0x00000000
+
+/* I2C addresses for the two DIMM SPD chips */
+#define DIMM0_I2C_ADDR 0x51
+#define DIMM1_I2C_ADDR 0x52
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1/* Flash can be at one of two addresses */
+#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_WRITE_SWAPPED_DATA
+
+#define PHYS_FLASH_SIZE 0x01000000
+#define CFG_MAX_FLASH_SECT (128)
+
+#define CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_ADDR 0xFC000000
+
+#define CFG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector */
+#define CFG_ENV_SIZE 0x00000400 /* Total Size of Environment Space */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * L2CR setup -- make sure this is right for your board!
+ * look in include/mpc74xx.h for the defines used here
+ */
+#undef CFG_L2
+
+#define L2_INIT 0
+#define L2_ENABLE (L2_INIT | L2CR_L2E)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CFG_SERIAL_HANG_IN_EXCEPTION
+#endif /* __CONFIG_H */
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 5c05a74..63d0da7 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -137,17 +137,17 @@
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
/*
* PCI Bus clocking configuration
*
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
*/
-#define CFG_PCISPEED_66 /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
#endif
#endif
@@ -276,7 +276,7 @@
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
/*
* For 66 MHz PCI clock additional Wait State is needed for CS0 (flash).
*/
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index fefdb3c..7151a9e 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -171,7 +171,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
#endif
/*
* I2C configuration
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 0b80888..23243a4 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -38,7 +38,9 @@
#define CONFIG_440GRX 1 /* Specific PPC440GRx */
#endif
#define CONFIG_4xx 1 /* ... PPC4xx family */
-#define CONFIG_SYS_CLK_FREQ 33000000 /* external freq to pll */
+/* Detect Sequoia PLL input clock automatically via CPLD bit */
+#define CONFIG_SYS_CLK_FREQ ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \
+ 33333333 : 33000000)
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index e106b3b..185c2d4 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -138,17 +138,17 @@
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
/*
* PCI Bus clocking configuration
*
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
*/
-#define CFG_PCISPEED_66 /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
#endif
/*
@@ -357,7 +357,7 @@
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
#else
#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index f40dde2..fd138a5 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -219,17 +219,17 @@
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
/*
* PCI Bus clocking configuration
*
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
*/
-#define CFG_PCISPEED_66 /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
#endif
/*
@@ -444,7 +444,7 @@
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
#else
#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
new file mode 100644
index 0000000..8624f4b
--- /dev/null
+++ b/include/configs/stxssa.h
@@ -0,0 +1,465 @@
+/*
+ * (C) Copyright 2005 Embedded Alley Solutions, Inc.
+ * Dan Malek <dan@embeddedalley.com>
+ * Copied from STx GP3.
+ * Updates for Silicon Tx GP3 SSA board.
+ *
+ * (C) Copyright 2002,2003 Motorola,Inc.
+ * Xianghua Xiao <X.Xiao@motorola.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* mpc8560ads board configuration file */
+/* please refer to doc/README.mpc85xx for more info */
+/* make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE 1 /* BOOKE */
+#define CONFIG_E500 1 /* BOOKE e500 family */
+#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
+#define CONFIG_CPM2 1 /* has CPM2 */
+#define CONFIG_STXSSA 1 /* Silicon Tx GPPP SSA board specific*/
+
+#undef CONFIG_PCI /* pci ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support*/
+#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+#undef CONFIG_DDR_DLL /* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+
+
+/* sysclk for MPC85xx
+ */
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */
+
+/* Blinkin' LEDs for Robert :-)
+*/
+#define CONFIG_SHOW_ACTIVITY 1
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00200000 /* memtest region */
+#define CFG_MEMTEST_END 0x00400000
+
+
+/* Localbus connector. There are many options that can be
+ * connected here, including sdram or lots of flash.
+ * This address, however, is used to configure a 256M local bus
+ * window that includes the Config latch below.
+ */
+#define CFG_LBC_OPTION_BASE 0xf0000000 /* Localbus Extension */
+#define CFG_LBC_OPTION_SIZE 256 /* 256MB */
+
+/* There are various flash options used, we configure for the largest,
+ * which is 64Mbytes. The CFI works fine and will discover the proper
+ * sizes.
+ */
+#define CFG_FLASH_BASE 0xFC000000 /* start of FLASH 64M */
+#define CFG_BR0_PRELIM 0xFC001801 /* port size 32bit */
+#define CFG_OR0_PRELIM 0xFC000FF7 /* 64 MB Flash */
+
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_FLASH_PROTECTION
+
+/* The configuration latch is Chip Select 1.
+ * It's an 8-bit latch in the lower 8 bits of the word.
+ */
+#define CFG_LBC_CFGLATCH_BASE 0xfb000000 /* Base of config latch */
+#define CFG_BR1_PRELIM 0xfb001801 /* 32-bit port */
+#define CFG_OR1_PRELIM 0xffff0ff7 /* 64K is enough */
+
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+#ifdef CFG_RAMBOOT
+#define CFG_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */
+#else
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#endif
+#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
+#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+
+
+/*
+ * DDR Setup
+ */
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
+
+#define SPD_EEPROM_ADDRESS 0x54 /* DDR DIMM */
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/* local bus definitions */
+#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */
+#define CFG_OR2_PRELIM 0xfc006901
+#define CFG_LBC_LCRR 0x00030004 /* local bus freq */
+#define CFG_LBC_LBCR 0x00000000
+#define CFG_LBC_LSRT 0x20000000
+#define CFG_LBC_MRTPR 0x20000000
+#define CFG_LBC_LSDMR_1 0x2861b723
+#define CFG_LBC_LSDMR_2 0x0861b723
+#define CFG_LBC_LSDMR_3 0x0861b723
+#define CFG_LBC_LSDMR_4 0x1861b723
+#define CFG_LBC_LSDMR_5 0x4061b723
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 2
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support*/
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#if 0
+#define CFG_I2C_NOPROBES {0x00} /* Don't probe these addrs */
+#else
+/* I did the 'if 0' so we could keep the syntax above if ever needed. */
+#undef CFG_I2C_NOPROBES
+#endif
+#define CFG_I2C_OFFSET 0x3000
+
+/* I2C EEPROM. AT24C32, we keep our environment in here.
+*/
+#define CFG_I2C_EEPROM_ADDR 0x51 /* 1010001x */
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+
+/*
+ * Standard 8555 PCI mapping.
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */
+
+#define CFG_PCI2_MEM_BASE 0xa0000000
+#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI2_IO_BASE 0x00000000
+#define CFG_PCI2_IO_PHYS 0xe3000000
+#define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */
+
+#if defined(CONFIG_PCI) /* PCI Ethernet card */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+ #define PCI_ENET0_IOADDR 0xe0000000
+ #define PCI_ENET0_MEMADDR 0xe0000000
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+#endif
+
+#undef CONFIG_PCI_SCAN_SHOW
+#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
+
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+#define CONFIG_MII 1 /* MII PHY management */
+
+#define CONFIG_MPC85XX_TSEC1 1
+#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
+#define CONFIG_MPC85XX_TSEC2 1
+#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
+#undef CONFIG_MPS85XX_FEC
+
+#define TSEC1_PHY_ADDR 2
+#define TSEC2_PHY_ADDR 4
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define CONFIG_ETHPRIME "TSEC0"
+
+#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
+
+#define CONFIG_ETHER_ON_FCC2 /* define if ether on FCC */
+#undef CONFIG_ETHER_NONE /* define if ether on something else */
+#define CONFIG_ETHER_INDEX 2 /* which channel for ether */
+
+#if (CONFIG_ETHER_INDEX == 2)
+ /*
+ * - Rx-CLK is CLK13
+ * - Tx-CLK is CLK14
+ * - Select bus for bd/buffers
+ * - Full duplex
+ */
+ #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+ #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+ #define CFG_CPMFCR_RAMTYPE 0
+#if 0
+ #define CFG_FCC_PSMR (FCC_PSMR_FDE)
+#else
+ #define CFG_FCC_PSMR 0
+#endif
+ #define FETH2_RST 0x01
+#elif (CONFIG_ETHER_INDEX == 3)
+ /* need more definitions here for FE3 */
+ #define FETH3_RST 0x80
+#endif /* CONFIG_ETHER_INDEX */
+
+/* MDIO is done through the TSEC0 control.
+*/
+#define CONFIG_MII /* MII PHY management */
+#undef CONFIG_BITBANGMII /* bit-bang MII PHY management */
+
+#endif
+
+/* Environment - default config is in flash, see below */
+#if 0 /* in EEPROM */
+#define CFG_ENV_IS_IN_EEPROM 1
+#define CFG_ENV_OFFSET 0
+#define CFG_ENV_SIZE 2048
+#else /* in flash */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SECT_SIZE 0x40000
+
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_TIMESTAMP /* Print image info with ts */
+
+#if defined(CFG_RAMBOOT)
+ #if defined(CONFIG_PCI)
+ #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \
+ CFG_CMD_PING | CFG_CMD_I2C) & \
+ ~(CFG_CMD_ENV | \
+ CFG_CMD_LOADS ))
+ #elif defined(CONFIG_TSEC_ENET)
+ #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | \
+ CFG_CMD_MII | CFG_CMD_I2C ) & \
+ ~(CFG_CMD_ENV))
+ #elif defined(CONFIG_ETHER_ON_FCC)
+ #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \
+ CFG_CMD_PING | CFG_CMD_I2C) & \
+ ~(CFG_CMD_ENV))
+ #endif
+#else
+ #if defined(CONFIG_PCI)
+ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \
+ CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
+ #elif defined(CONFIG_TSEC_ENET)
+ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | \
+ CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_I2C)
+ #elif defined(CONFIG_ETHER_ON_FCC)
+ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \
+ CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
+ #endif
+#endif
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "SSA=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x1000000 /* default load address */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*Note: change below for your network setting!!! */
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR 00:e0:0c:07:9b:8c
+#endif
+
+/*
+ * Environment in EEPROM is compatible with different flash sector sizes,
+ * but only little space is available, so we use a very simple setup.
+ * With environment in flash, we use a more powerful default configuration.
+ */
+#ifdef CFG_ENV_IS_IN_EEPROM /* use restricted "standard" environment */
+
+#define CONFIG_BAUDRATE 38400
+
+#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
+#define CONFIG_BOOTCOMMAND "bootm 0xffc00000 0xffd00000"
+#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=any console=ttyS1,$baudrate"
+#define CONFIG_SERVERIP 192.168.85.1
+#define CONFIG_IPADDR 192.168.85.60
+#define CONFIG_GATEWAYIP 192.168.85.1
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_HOSTNAME STX_SSA
+#define CONFIG_ROOTPATH /gppproot
+#define CONFIG_BOOTFILE uImage
+#define CONFIG_LOADADDR 0x1000000
+
+#else /* ENV IS IN FLASH -- use a full-blown envionment */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hostname=gp3ssa\0" \
+ "bootfile=/tftpboot/gp3ssa/uImage\0" \
+ "loadaddr=400000\0" \
+ "netdev=eth0\0" \
+ "consdev=ttyS1\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $bootargs " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask" \
+ ":$hostname:$netdev:off panic=1\0" \
+ "addcons=setenv bootargs $bootargs " \
+ "console=$consdev,$baudrate\0" \
+ "flash_nfs=run nfsargs addip addcons;" \
+ "bootm $kernel_addr\0" \
+ "flash_self=run ramargs addip addcons;" \
+ "bootm $kernel_addr $ramdisk_addr\0" \
+ "net_nfs=tftp $loadaddr $bootfile;" \
+ "run nfsargs addip addcons;bootm\0" \
+ "rootpath=/opt/eldk/ppc_85xx\0" \
+ "kernel_addr=FC000000\0" \
+ "ramdisk_addr=FC200000\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#endif /* CFG_ENV_IS_IN_EEPROM */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/uc101.h b/include/configs/uc101.h
index 8cd8e9b..ff061ee 100644
--- a/include/configs/uc101.h
+++ b/include/configs/uc101.h
@@ -114,7 +114,7 @@
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
/*
* I2C configuration
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index e19591d..0b7b19e 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -167,7 +167,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
#endif
/*
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index a2f4810..b4c720d 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -132,6 +132,8 @@
CFG_CMD_LOADS |\
CFG_CMD_LOADB |\
CFG_CMD_MISC |\
+ CFG_CMD_FAT |\
+ CFG_CMD_EXT2 |\
CFG_CMD_PING \
)
@@ -163,12 +165,12 @@
"base 0;" \
"echo"
-
/* system ace */
-/*#define CONFIG_SYSTEMACE
-#define DEBUG_SYSTEMACE
-#define CFG_SYSTEMACE_BASE 0xCF000000
-#define CFG_SYSTEMACE_WIDTH 16
-#define CONFIG_DOS_PARTITION*/
+#define CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+#define SYSTEMACE_CONFIG_FPGA
+#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
+#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
+#define CONFIG_DOS_PARTITION
#endif /* __CONFIG_H */
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index c6aa8ec..1e8ed7a 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -174,7 +174,6 @@
/*
* NAND Flash
*/
-/* Use the new NAND code. (BOARDLIBS = drivers/nand/libnand.a required) */
#define CONFIG_NEW_NAND_CODE
#define CFG_NAND0_BASE 0x0
#undef CFG_NAND1_BASE
diff --git a/include/fdt.h b/include/fdt.h
index 48ccfd9..3dd3aca 100644
--- a/include/fdt.h
+++ b/include/fdt.h
@@ -1,3 +1,22 @@
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1 of
+ * the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
#ifndef _FDT_H
#define _FDT_H
diff --git a/cpu/at32ap/at32ap7000/hebi.c b/include/fdt_support.h
similarity index 64%
copy from cpu/at32ap/at32ap7000/hebi.c
copy to include/fdt_support.h
index 3b32adf..a276834 100644
--- a/cpu/at32ap/at32ap7000/hebi.c
+++ b/include/fdt_support.h
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2006 Atmel Corporation
+ * (C) Copyright 2007
+ * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -19,20 +20,23 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-#include <common.h>
-#include <asm/io.h>
+#ifndef __FDT_SUPPORT_H
+#define __FDT_SUPPORT_H
-#include <asm/arch/hmatrix2.h>
-#include <asm/arch/memory-map.h>
-#include <asm/arch/platform.h>
+#ifdef CONFIG_OF_LIBFDT
-void cpu_enable_sdram(void)
-{
- const struct device *hmatrix;
+#include <fdt.h>
- hmatrix = get_device(DEVICE_HMATRIX);
+int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force);
- /* Set the SDRAM_ENABLE bit in the HEBI SFR */
- hmatrix2_writel(hmatrix, SFR4, 1 << 1);
-}
+#ifdef CONFIG_OF_HAS_UBOOT_ENV
+int fdt_env(void *fdt);
+#endif
+
+#ifdef CONFIG_OF_HAS_BD_T
+int fdt_bd_t(void *fdt);
+#endif
+
+#endif /* ifdef CONFIG_OF_LIBFDT */
+#endif /* ifndef __FDT_SUPPORT_H */
diff --git a/include/libfdt.h b/include/libfdt.h
index a0b4d55..f8bac73 100644
--- a/include/libfdt.h
+++ b/include/libfdt.h
@@ -1,5 +1,3 @@
-#ifndef _LIBFDT_H
-#define _LIBFDT_H
/*
* libfdt - Flat Device Tree manipulation
* Copyright (C) 2006 David Gibson, IBM Corporation.
@@ -19,6 +17,9 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#ifndef _LIBFDT_H
+#define _LIBFDT_H
+
#include <fdt.h>
#include <libfdt_env.h>
@@ -60,6 +61,8 @@
#define fdt_set_header(fdt, field, val) \
((struct fdt_header *)(fdt))->field = cpu_to_fdt32(val)
+int fdt_check_header(const void *fdt);
+
void *fdt_offset_ptr(const void *fdt, int offset, int checklen);
#define fdt_offset_ptr_typed(fdt, offset, var) \
@@ -83,6 +86,8 @@
uint32_t fdt_next_tag(const void *fdt, int offset,
int *nextoffset, char **namep);
+int fdt_num_reservemap(void *fdt, int *used, int *total);
+int fdt_get_reservemap(void *fdt, int n, struct fdt_reserve_entry *re);
/* Write-in-place functions */
int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
@@ -96,6 +101,8 @@
int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
int fdt_nop_node(void *fdt, int nodeoffset);
+int fdt_insert_reservemap_entry(void *fdt, int n, uint64_t addr, uint64_t size);
+
/* Sequential-write functions */
int fdt_create(void *buf, int bufsize);
@@ -112,6 +119,7 @@
fdt_property(fdt, name, str, strlen(str)+1)
int fdt_end_node(void *fdt);
int fdt_finish(void *fdt);
+int fdt_replace_reservemap_entry(void *fdt, int n, uint64_t addr, uint64_t size);
/* Read-write functions */
int fdt_open_into(void *fdt, void *buf, int bufsize);
diff --git a/include/libfdt_env.h b/include/libfdt_env.h
index 6c77852..e746314 100644
--- a/include/libfdt_env.h
+++ b/include/libfdt_env.h
@@ -1,3 +1,23 @@
+/*
+ * libfdt - Flat Device Tree manipulation (build/run environment adaptation)
+ * Copyright (C) 2007 Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
+ * Original version written by David Gibson, IBM Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1 of
+ * the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
#ifndef _LIBFDT_ENV_H
#define _LIBFDT_ENV_H
diff --git a/include/linux/mii.h b/include/linux/mii.h
new file mode 100644
index 0000000..7c63095
--- /dev/null
+++ b/include/linux/mii.h
@@ -0,0 +1,158 @@
+/*
+ * linux/mii.h: definitions for MII-compatible transceivers
+ * Originally drivers/net/sunhme.h.
+ *
+ * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __LINUX_MII_H__
+#define __LINUX_MII_H__
+
+/* Generic MII registers. */
+
+#define MII_BMCR 0x00 /* Basic mode control register */
+#define MII_BMSR 0x01 /* Basic mode status register */
+#define MII_PHYSID1 0x02 /* PHYS ID 1 */
+#define MII_PHYSID2 0x03 /* PHYS ID 2 */
+#define MII_ADVERTISE 0x04 /* Advertisement control reg */
+#define MII_LPA 0x05 /* Link partner ability reg */
+#define MII_EXPANSION 0x06 /* Expansion register */
+#define MII_DCOUNTER 0x12 /* Disconnect counter */
+#define MII_FCSCOUNTER 0x13 /* False carrier counter */
+#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */
+#define MII_RERRCOUNTER 0x15 /* Receive error counter */
+#define MII_SREVISION 0x16 /* Silicon revision */
+#define MII_RESV1 0x17 /* Reserved... */
+#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */
+#define MII_PHYADDR 0x19 /* PHY address */
+#define MII_RESV2 0x1a /* Reserved... */
+#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */
+#define MII_NCONFIG 0x1c /* Network interface config */
+
+/* Basic mode control register. */
+#define BMCR_RESV 0x003f /* Unused... */
+#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */
+#define BMCR_CTST 0x0080 /* Collision test */
+#define BMCR_FULLDPLX 0x0100 /* Full duplex */
+#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */
+#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */
+#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */
+#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
+#define BMCR_SPEED100 0x2000 /* Select 100Mbps */
+#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */
+#define BMCR_RESET 0x8000 /* Reset the DP83840 */
+
+/* Basic mode status register. */
+#define BMSR_ERCAP 0x0001 /* Ext-reg capability */
+#define BMSR_JCD 0x0002 /* Jabber detected */
+#define BMSR_LSTATUS 0x0004 /* Link status */
+#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */
+#define BMSR_RFAULT 0x0010 /* Remote fault detected */
+#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */
+#define BMSR_RESV 0x07c0 /* Unused... */
+#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
+#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
+#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
+#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
+#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */
+
+/* Advertisement control register. */
+#define ADVERTISE_SLCT 0x001f /* Selector bits */
+#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
+#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
+#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
+#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
+#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
+#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
+#define ADVERTISE_RESV 0x1c00 /* Unused... */
+#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
+#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
+#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
+
+#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
+ ADVERTISE_CSMA)
+#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
+ ADVERTISE_100HALF | ADVERTISE_100FULL)
+
+/* Link partner ability register. */
+#define LPA_SLCT 0x001f /* Same as advertise selector */
+#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
+#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
+#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
+#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
+#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */
+#define LPA_RESV 0x1c00 /* Unused... */
+#define LPA_RFAULT 0x2000 /* Link partner faulted */
+#define LPA_LPACK 0x4000 /* Link partner acked us */
+#define LPA_NPAGE 0x8000 /* Next page bit */
+
+#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL)
+#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4)
+
+/* Expansion register for auto-negotiation. */
+#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */
+#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */
+#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */
+#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */
+#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */
+#define EXPANSION_RESV 0xffe0 /* Unused... */
+
+/* N-way test register. */
+#define NWAYTEST_RESV1 0x00ff /* Unused... */
+#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */
+#define NWAYTEST_RESV2 0xfe00 /* Unused... */
+
+
+/**
+ * mii_nway_result
+ * @negotiated: value of MII ANAR and'd with ANLPAR
+ *
+ * Given a set of MII abilities, check each bit and returns the
+ * currently supported media, in the priority order defined by
+ * IEEE 802.3u. We use LPA_xxx constants but note this is not the
+ * value of LPA solely, as described above.
+ *
+ * The one exception to IEEE 802.3u is that 100baseT4 is placed
+ * between 100T-full and 100T-half. If your phy does not support
+ * 100T4 this is fine. If your phy places 100T4 elsewhere in the
+ * priority order, you will need to roll your own function.
+ */
+static inline unsigned int mii_nway_result (unsigned int negotiated)
+{
+ unsigned int ret;
+
+ if (negotiated & LPA_100FULL)
+ ret = LPA_100FULL;
+ else if (negotiated & LPA_100BASE4)
+ ret = LPA_100BASE4;
+ else if (negotiated & LPA_100HALF)
+ ret = LPA_100HALF;
+ else if (negotiated & LPA_10FULL)
+ ret = LPA_10FULL;
+ else
+ ret = LPA_10HALF;
+
+ return ret;
+}
+
+/**
+ * mii_duplex
+ * @duplex_lock: Non-zero if duplex is locked at full
+ * @negotiated: value of MII ANAR and'd with ANLPAR
+ *
+ * A small helper function for a common case. Returns one
+ * if the media is operating or locked at full duplex, and
+ * returns zero otherwise.
+ */
+static inline unsigned int mii_duplex (unsigned int duplex_lock,
+ unsigned int negotiated)
+{
+ if (duplex_lock)
+ return 1;
+ if (mii_nway_result(negotiated) & LPA_DUPLEX)
+ return 1;
+ return 0;
+}
+
+
+#endif /* __LINUX_MII_H__ */
diff --git a/include/linux/stat.h b/include/linux/stat.h
index 4d05aa9..37f2924 100644
--- a/include/linux/stat.h
+++ b/include/linux/stat.h
@@ -7,7 +7,7 @@
extern "C" {
#endif
-#define S_IFMT 00170000 /* type of file */
+#define S_IFMT 00170000 /* type of file */
#define S_IFSOCK 0140000 /* named socket */
#define S_IFLNK 0120000 /* symbolic link */
#define S_IFREG 0100000 /* regular */
@@ -49,25 +49,26 @@
ino_t st_ino; /* file id */
mode_t st_mode; /* ownership/protection */
nlink_t st_nlink; /* number of links */
- uid_t st_uid; /* user id */
- gid_t st_gid; /* group id */
+ uid_t st_uid; /* user id */
+ gid_t st_gid; /* group id */
dev_t st_rdev;
off_t st_size; /* file size in # of bytes */
- unsigned long st_blksize; /* block size */
- unsigned long st_blocks; /* file size in # of blocks */
- unsigned long st_atime; /* time file was last accessed */
- unsigned long __unused1;
- unsigned long st_mtime; /* time file was last modified */
- unsigned long __unused2;
- unsigned long st_ctime; /* time file status was last changed */
- unsigned long __unused3;
- unsigned long __unused4;
- unsigned long __unused5;
+ unsigned long st_blksize; /* block size */
+ unsigned long st_blocks; /* file size in # of blocks */
+ unsigned long st_atime; /* time file was last accessed */
+ unsigned long __unused1;
+ unsigned long st_mtime; /* time file was last modified */
+ unsigned long __unused2;
+ unsigned long st_ctime; /* time file status was last changed */
+ unsigned long __unused3;
+ unsigned long __unused4;
+ unsigned long __unused5;
};
#endif /* __PPC__ */
-#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__bfin__)
+#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__bfin__) ||\
+ defined (__microblaze__)
struct stat {
unsigned short st_dev;
@@ -97,34 +98,59 @@
#if defined (__MIPS__)
struct stat {
- dev_t st_dev;
- long st_pad1[3];
- ino_t st_ino;
- mode_t st_mode;
- nlink_t st_nlink;
- uid_t st_uid;
- gid_t st_gid;
- dev_t st_rdev;
- long st_pad2[2];
- off_t st_size;
- long st_pad3;
+ dev_t st_dev;
+ long st_pad1[3];
+ ino_t st_ino;
+ mode_t st_mode;
+ nlink_t st_nlink;
+ uid_t st_uid;
+ gid_t st_gid;
+ dev_t st_rdev;
+ long st_pad2[2];
+ off_t st_size;
+ long st_pad3;
/*
* Actually this should be timestruc_t st_atime, st_mtime and st_ctime
* but we don't have it under Linux.
*/
- time_t st_atime;
- long reserved0;
- time_t st_mtime;
- long reserved1;
- time_t st_ctime;
- long reserved2;
- long st_blksize;
- long st_blocks;
- long st_pad4[14];
+ time_t st_atime;
+ long reserved0;
+ time_t st_mtime;
+ long reserved1;
+ time_t st_ctime;
+ long reserved2;
+ long st_blksize;
+ long st_blocks;
+ long st_pad4[14];
};
#endif /* __MIPS__ */
+#if defined(__AVR32__)
+
+struct stat {
+ unsigned long st_dev;
+ unsigned long st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned long st_rdev;
+ unsigned long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* __AVR32__ */
+
#ifdef __cplusplus
}
#endif
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index c2a4ff5..60fc214 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -95,6 +95,11 @@
#define SPR_8321E_REV11 0x80660011
#define SPR_8321_REV11 0x80670011
+#define SPR_8311_REV10 0x80B30010
+#define SPR_8311E_REV10 0x80B20010
+#define SPR_8313_REV10 0x80B10010
+#define SPR_8313E_REV10 0x80B00010
+
/* SPCR - System Priority Configuration Register
*/
#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */
@@ -121,6 +126,15 @@
#define SPCR_TSEC2BDP_SHIFT (31-29)
#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */
#define SPCR_TSEC2EP_SHIFT (31-31)
+
+#elif defined(CONFIG_MPC831X)
+/* SPCR bits - MPC831x specific */
+#define SPCR_TSECDP 0x00003000 /* TSEC data priority */
+#define SPCR_TSECDP_SHIFT (31-19)
+#define SPCR_TSECEP 0x00000C00 /* TSEC emergency priority */
+#define SPCR_TSECEP_SHIFT (31-21)
+#define SPCR_TSECBDP 0x00000300 /* TSEC buffer descriptor priority */
+#define SPCR_TSECBDP_SHIFT (31-23)
#endif
/* SICRL/H - System I/O Configuration Register Low/High
@@ -195,6 +209,36 @@
#define SICRL_PCI_MSRC 0x10000000
#define SICRL_URT_CTPR 0x06000000
#define SICRL_IRQ_CTPR 0x00C00000
+
+#elif defined(CONFIG_MPC831X)
+/* SICRL bits - MPC831x specific */
+#define SICRL_LBC 0x30000000
+#define SICRL_UART 0x0C000000
+#define SICRL_SPI_A 0x03000000
+#define SICRL_SPI_B 0x00C00000
+#define SICRL_SPI_C 0x00300000
+#define SICRL_SPI_D 0x000C0000
+#define SICRL_USBDR 0x00000C00
+#define SICRL_ETSEC1_A 0x0000000C
+#define SICRL_ETSEC2_A 0x00000003
+
+/* SICRH bits - MPC831x specific */
+#define SICRH_INTR_A 0x02000000
+#define SICRH_INTR_B 0x00C00000
+#define SICRH_IIC 0x00300000
+#define SICRH_ETSEC2_B 0x000C0000
+#define SICRH_ETSEC2_C 0x00030000
+#define SICRH_ETSEC2_D 0x0000C000
+#define SICRH_ETSEC2_E 0x00003000
+#define SICRH_ETSEC2_F 0x00000C00
+#define SICRH_ETSEC2_G 0x00000300
+#define SICRH_ETSEC1_B 0x00000080
+#define SICRH_ETSEC1_C 0x00000060
+#define SICRH_GTX1_DLY 0x00000008
+#define SICRH_GTX2_DLY 0x00000004
+#define SICRH_TSOBI1 0x00000002
+#define SICRH_TSOBI2 0x00000001
+
#endif
/* SWCRR - System Watchdog Control Register
@@ -393,6 +437,28 @@
#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000
#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000
+#if defined(CONFIG_MPC831X)
+#define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000
+#define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000
+#define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000
+#define HRCWH_ROM_LOC_NAND_LP_16BIT 0x00600000
+
+#define HRCWH_RL_EXT_LEGACY 0x00000000
+#define HRCWH_RL_EXT_NAND 0x00040000
+
+#define HRCWH_TSEC1M_IN_MII 0x00000000
+#define HRCWH_TSEC1M_IN_RMII 0x00002000
+#define HRCWH_TSEC1M_IN_RGMII 0x00006000
+#define HRCWH_TSEC1M_IN_RTBI 0x0000A000
+#define HRCWH_TSEC1M_IN_SGMII 0x0000C000
+
+#define HRCWH_TSEC2M_IN_MII 0x00000000
+#define HRCWH_TSEC2M_IN_RMII 0x00000400
+#define HRCWH_TSEC2M_IN_RGMII 0x00000C00
+#define HRCWH_TSEC2M_IN_RTBI 0x00001400
+#define HRCWH_TSEC2M_IN_SGMII 0x00001800
+#endif
+
#if defined(CONFIG_MPC834X)
#define HRCWH_TSEC1M_IN_RGMII 0x00000000
#define HRCWH_TSEC1M_IN_RTBI 0x00004000
@@ -523,6 +589,18 @@
#define SCCR_TSEC2CM_1 0x10000000
#define SCCR_TSEC2CM_2 0x20000000
#define SCCR_TSEC2CM_3 0x30000000
+
+#elif defined(CONFIG_MPC831X)
+/* TSEC1 bits are for TSEC2 as well */
+#define SCCR_TSEC1CM 0xc0000000
+#define SCCR_TSEC1CM_SHIFT 30
+#define SCCR_TSEC1CM_1 0x40000000
+#define SCCR_TSEC1CM_2 0x80000000
+#define SCCR_TSEC1CM_3 0xC0000000
+
+#define SCCR_TSEC1ON 0x20000000
+#define SCCR_TSEC2ON 0x10000000
+
#endif
#define SCCR_USBMPHCM 0x00c00000
@@ -556,6 +634,25 @@
#define CSCONFIG_COL_BIT_10 0x00000002
#define CSCONFIG_COL_BIT_11 0x00000003
+/* TIMING_CFG_0 - DDR SDRAM Timing Configuration 0
+ */
+#define TIMING_CFG0_RWT 0xC0000000
+#define TIMING_CFG0_RWT_SHIFT 30
+#define TIMING_CFG0_WRT 0x30000000
+#define TIMING_CFG0_WRT_SHIFT 28
+#define TIMING_CFG0_RRT 0x0C000000
+#define TIMING_CFG0_RRT_SHIFT 26
+#define TIMING_CFG0_WWT 0x03000000
+#define TIMING_CFG0_WWT_SHIFT 24
+#define TIMING_CFG0_ACT_PD_EXIT 0x00700000
+#define TIMING_CFG0_ACT_PD_EXIT_SHIFT 20
+#define TIMING_CFG0_PRE_PD_EXIT 0x00070000
+#define TIMING_CFG0_PRE_PD_EXIT_SHIFT 16
+#define TIMING_CFG0_ODT_PD_EXIT 0x00000F00
+#define TIMING_CFG0_ODT_PD_EXIT_SHIFT 8
+#define TIMING_CFG0_MRS_CYC 0x00000F00
+#define TIMING_CFG0_MRS_CYC_SHIFT 0
+
/* TIMING_CFG_1 - DDR SDRAM Timing Configuration 1
*/
#define TIMING_CFG1_PRETOACT 0x70000000
@@ -586,6 +683,17 @@
#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10
#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */
+#define TIMING_CFG2_ADD_LAT 0x70000000
+#define TIMING_CFG2_ADD_LAT_SHIFT 28
+#define TIMING_CFG2_WR_LAT_DELAY 0x00380000
+#define TIMING_CFG2_WR_LAT_DELAY_SHIFT 19
+#define TIMING_CFG2_RD_TO_PRE 0x0000E000
+#define TIMING_CFG2_RD_TO_PRE_SHIFT 13
+#define TIMING_CFG2_CKE_PLS 0x000001C0
+#define TIMING_CFG2_CKE_PLS_SHIFT 6
+#define TIMING_CFG2_FOUR_ACT 0x0000003F
+#define TIMING_CFG2_FOUR_ACT_SHIFT 0
+
/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
*/
#define SDRAM_CFG_MEM_EN 0x80000000
@@ -593,13 +701,14 @@
#define SDRAM_CFG_ECC_EN 0x20000000
#define SDRAM_CFG_RD_EN 0x10000000
#define SDRAM_CFG_SDRAM_TYPE 0x03000000
+#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000
#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
#define SDRAM_CFG_DYN_PWR 0x00200000
#define SDRAM_CFG_32_BE 0x00080000
#define SDRAM_CFG_8_BE 0x00040000
#define SDRAM_CFG_NCAP 0x00020000
#define SDRAM_CFG_2T_EN 0x00008000
-#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000
+#define SDRAM_CFG_BI 0x00000001
/* DDR_SDRAM_MODE - DDR SDRAM Mode Register
*/
@@ -732,11 +841,15 @@
#define BR_PS_32 0x00001800 /* Port Size 32 bit */
#define BR_DECC 0x00000600
#define BR_DECC_SHIFT 9
+#define BR_DECC_OFF 0x00000000
+#define BR_DECC_CHK 0x00000200
+#define BR_DECC_CHK_GEN 0x00000400
#define BR_WP 0x00000100
#define BR_WP_SHIFT 8
#define BR_MSEL 0x000000E0
#define BR_MSEL_SHIFT 5
#define BR_MS_GPCM 0x00000000 /* GPCM */
+#define BR_MS_FCM 0x00000020 /* FCM */
#define BR_MS_SDRAM 0x00000060 /* SDRAM */
#define BR_MS_UPMA 0x00000080 /* UPMA */
#define BR_MS_UPMB 0x000000A0 /* UPMB */
@@ -803,6 +916,34 @@
#define OR_GPCM_EAD 0x00000001
#define OR_GPCM_EAD_SHIFT 0
+#define OR_FCM_AM 0xFFFF8000
+#define OR_FCM_AM_SHIFT 15
+#define OR_FCM_BCTLD 0x00001000
+#define OR_FCM_BCTLD_SHIFT 12
+#define OR_FCM_PGS 0x00000400
+#define OR_FCM_PGS_SHIFT 10
+#define OR_FCM_CSCT 0x00000200
+#define OR_FCM_CSCT_SHIFT 9
+#define OR_FCM_CST 0x00000100
+#define OR_FCM_CST_SHIFT 8
+#define OR_FCM_CHT 0x00000080
+#define OR_FCM_CHT_SHIFT 7
+#define OR_FCM_SCY 0x00000070
+#define OR_FCM_SCY_SHIFT 4
+#define OR_FCM_SCY_1 0x00000010
+#define OR_FCM_SCY_2 0x00000020
+#define OR_FCM_SCY_3 0x00000030
+#define OR_FCM_SCY_4 0x00000040
+#define OR_FCM_SCY_5 0x00000050
+#define OR_FCM_SCY_6 0x00000060
+#define OR_FCM_SCY_7 0x00000070
+#define OR_FCM_RST 0x00000008
+#define OR_FCM_RST_SHIFT 3
+#define OR_FCM_TRLX 0x00000004
+#define OR_FCM_TRLX_SHIFT 2
+#define OR_FCM_EHTR 0x00000002
+#define OR_FCM_EHTR_SHIFT 1
+
#define OR_UPM_AM 0xFFFF8000
#define OR_UPM_AM_SHIFT 15
#define OR_UPM_XAM 0x00006000
@@ -1019,4 +1160,118 @@
#define PIWAR_IWS_1G 0x0000001D
#define PIWAR_IWS_2G 0x0000001E
+/* PMCCR1 - PCI Configuration Register 1
+ */
+#define PMCCR1_POWER_OFF 0x00000020
+
+/* FMR - Flash Mode Register
+ */
+#define FMR_CWTO 0x0000F000
+#define FMR_CWTO_SHIFT 12
+#define FMR_BOOT 0x00000800
+#define FMR_ECCM 0x00000100
+#define FMR_AL 0x00000030
+#define FMR_AL_SHIFT 4
+#define FMR_OP 0x00000003
+#define FMR_OP_SHIFT 0
+
+/* FIR - Flash Instruction Register
+ */
+#define FIR_OP0 0xF0000000
+#define FIR_OP0_SHIFT 28
+#define FIR_OP1 0x0F000000
+#define FIR_OP1_SHIFT 24
+#define FIR_OP2 0x00F00000
+#define FIR_OP2_SHIFT 20
+#define FIR_OP3 0x000F0000
+#define FIR_OP3_SHIFT 16
+#define FIR_OP4 0x0000F000
+#define FIR_OP4_SHIFT 12
+#define FIR_OP5 0x00000F00
+#define FIR_OP5_SHIFT 8
+#define FIR_OP6 0x000000F0
+#define FIR_OP6_SHIFT 4
+#define FIR_OP7 0x0000000F
+#define FIR_OP7_SHIFT 0
+#define FIR_OP_NOP 0x0 /* No operation and end of sequence */
+#define FIR_OP_CA 0x1 /* Issue current column address */
+#define FIR_OP_PA 0x2 /* Issue current block+page address */
+#define FIR_OP_UA 0x3 /* Issue user defined address */
+#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */
+#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */
+#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */
+#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */
+#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */
+#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */
+#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */
+#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */
+#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */
+#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */
+#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */
+#define FIR_OP_RSW 0xF /* Wait then read 1 or 2 bytes */
+
+/* FCR - Flash Command Register
+ */
+#define FCR_CMD0 0xFF000000
+#define FCR_CMD0_SHIFT 24
+#define FCR_CMD1 0x00FF0000
+#define FCR_CMD1_SHIFT 16
+#define FCR_CMD2 0x0000FF00
+#define FCR_CMD2_SHIFT 8
+#define FCR_CMD3 0x000000FF
+#define FCR_CMD3_SHIFT 0
+
+/* FBAR - Flash Block Address Register
+ */
+#define FBAR_BLK 0x00FFFFFF
+
+/* FPAR - Flash Page Address Register
+ */
+#define FPAR_SP_PI 0x00007C00
+#define FPAR_SP_PI_SHIFT 10
+#define FPAR_SP_MS 0x00000200
+#define FPAR_SP_CI 0x000001FF
+#define FPAR_SP_CI_SHIFT 0
+#define FPAR_LP_PI 0x0003F000
+#define FPAR_LP_PI_SHIFT 12
+#define FPAR_LP_MS 0x00000800
+#define FPAR_LP_CI 0x000007FF
+#define FPAR_LP_CI_SHIFT 0
+
+/* LTESR - Transfer Error Status Register
+ */
+#define LTESR_BM 0x80000000
+#define LTESR_FCT 0x40000000
+#define LTESR_PAR 0x20000000
+#define LTESR_WP 0x04000000
+#define LTESR_ATMW 0x00800000
+#define LTESR_ATMR 0x00400000
+#define LTESR_CS 0x00080000
+#define LTESR_CC 0x00000001
+
+/* DDR Control Driver Register
+ */
+#define DDRCDR_EN 0x40000000
+#define DDRCDR_PZ 0x3C000000
+#define DDRCDR_PZ_MAXZ 0x00000000
+#define DDRCDR_PZ_HIZ 0x20000000
+#define DDRCDR_PZ_NOMZ 0x30000000
+#define DDRCDR_PZ_LOZ 0x38000000
+#define DDRCDR_PZ_MINZ 0x3C000000
+#define DDRCDR_NZ 0x3C000000
+#define DDRCDR_NZ_MAXZ 0x00000000
+#define DDRCDR_NZ_HIZ 0x02000000
+#define DDRCDR_NZ_NOMZ 0x03000000
+#define DDRCDR_NZ_LOZ 0x03800000
+#define DDRCDR_NZ_MINZ 0x03C00000
+#define DDRCDR_ODT 0x00080000
+#define DDRCDR_DDR_CFG 0x00040000
+#define DDRCDR_M_ODR 0x00000002
+#define DDRCDR_Q_DRN 0x00000001
+
+#ifndef __ASSEMBLY__
+struct pci_region;
+void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot);
+#endif
+
#endif /* __MPC83XX_H__ */
diff --git a/include/mpc86xx.h b/include/mpc86xx.h
index bc8ba3f..673bfed 100644
--- a/include/mpc86xx.h
+++ b/include/mpc86xx.h
@@ -9,6 +9,15 @@
#define EXC_OFF_SYS_RESET 0x0100 /* System reset offset */
+
+/*
+ * platform register addresses
+ */
+
+#define GUTS_SVR (CFG_CCSRBAR + 0xE00A4)
+#define MCM_ABCR (CFG_CCSRBAR + 0x01000)
+#define MCM_DBCR (CFG_CCSRBAR + 0x01008)
+
/*
* l2cr values. Look in config_<BOARD>.h for the actual setup
*/
diff --git a/include/ppc405.h b/include/ppc405.h
index a2503a9..fffae4d 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -547,8 +547,8 @@
#define sdrcfga (SDR_DCR_BASE+0x0) /* ADDR */
#define sdrcfgd (SDR_DCR_BASE+0x1) /* Data */
-#define mtsdr(reg, data) mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data)
-#define mfsdr(reg, data) mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd)
+#define mtsdr(reg, data) do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } while (0)
+#define mfsdr(reg, data) do { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } while (0)
#define sdrnand0 0x4000
#define sdrultra0 0x4040
@@ -593,8 +593,8 @@
/*
* Macro for accessing the indirect CPR register
*/
-#define mtcpr(reg, data) mtdcr(cprcfga,reg);mtdcr(cprcfgd,data)
-#define mfcpr(reg, data) mtdcr(cprcfga,reg);data = mfdcr(cprcfgd)
+#define mtcpr(reg, data) do { mtdcr(cprcfga,reg);mtdcr(cprcfgd,data); } while (0)
+#define mfcpr(reg, data) do { mtdcr(cprcfga,reg);data = mfdcr(cprcfgd); } while (0)
#define CPR_CLKUPD_ENPLLCH_EN 0x40000000 /* Enable CPR PLL Changes */
#define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */
diff --git a/include/ppc440.h b/include/ppc440.h
index bc1d7aa..07f75de 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -1425,9 +1425,6 @@
/*----------------------------------------------------------------------------+
| Clock / Power-on-reset DCR's.
+----------------------------------------------------------------------------*/
-#define CPR0_CFGADDR 0x00C
-#define CPR0_CFGDATA 0x00D
-
#define CPR0_CLKUPD 0x20
#define CPR0_CLKUPD_BSY_MASK 0x80000000
#define CPR0_CLKUPD_BSY_COMPLETED 0x00000000
@@ -3314,6 +3311,23 @@
#define mtsdr(reg, data) do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } while (0)
#define mfsdr(reg, data) do { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } while (0)
+/*
+ * All 44x except 440GP have CPR registers (indirect DCR)
+ */
+#if !defined(CONFIG_440GP)
+#define CPR0_CFGADDR 0x00C
+#define CPR0_CFGDATA 0x00D
+
+#define mtcpr(reg, data) do { \
+ mtdcr(CPR0_CFGADDR, reg); \
+ mtdcr(CPR0_CFGDATA, data); \
+ } while (0)
+
+#define mfcpr(reg, data) do { \
+ mtdcr(CPR0_CFGADDR, reg); \
+ data = mfdcr(CPR0_CFGDATA); \
+ } while (0)
+#endif
#ifndef __ASSEMBLY__
diff --git a/include/status_led.h b/include/status_led.h
index db4c60f..71a202f 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -355,6 +355,18 @@
# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+#elif defined(CONFIG_MOTIONPRO)
+
+#define STATUS_LED_BIT ((vu_long *) MPC5XXX_GPT6_ENABLE)
+#define STATUS_LED_PERIOD (CFG_HZ / 10)
+#define STATUS_LED_STATE STATUS_LED_BLINKING
+
+#define STATUS_LED_BIT1 ((vu_long *) MPC5XXX_GPT7_ENABLE)
+#define STATUS_LED_PERIOD1 (CFG_HZ / 10)
+#define STATUS_LED_STATE1 STATUS_LED_OFF
+
+#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+
#else
# error Status LED configuration missing
#endif
diff --git a/include/tsi108.h b/include/tsi108.h
new file mode 100644
index 0000000..ba62e7a
--- /dev/null
+++ b/include/tsi108.h
@@ -0,0 +1,221 @@
+/*****************************************************************************
+ * (C) Copyright 2003; Tundra Semiconductor Corp.
+ * (C) Copyright 2006; Freescale Semiconductor Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *****************************************************************************/
+
+/*
+ * FILENAME: tsi108.h
+ *
+ * Originator: Alex Bounine
+ *
+ * DESCRIPTION:
+ * Common definitions for the Tundra Tsi108 bridge chip
+ *
+ */
+
+#ifndef _TSI108_H_
+#define _TSI108_H_
+
+#define TSI108_HLP_REG_OFFSET (0x0000)
+#define TSI108_PCI_REG_OFFSET (0x1000)
+#define TSI108_CLK_REG_OFFSET (0x2000)
+#define TSI108_PB_REG_OFFSET (0x3000)
+#define TSI108_SD_REG_OFFSET (0x4000)
+#define TSI108_MPIC_REG_OFFSET (0x7400)
+
+#define PB_ID (0x000)
+#define PB_RSR (0x004)
+#define PB_BUS_MS_SELECT (0x008)
+#define PB_ISR (0x00C)
+#define PB_ARB_CTRL (0x018)
+#define PB_PVT_CTRL2 (0x034)
+#define PB_SCR (0x400)
+#define PB_ERRCS (0x404)
+#define PB_AERR (0x408)
+#define PB_REG_BAR (0x410)
+#define PB_OCN_BAR1 (0x414)
+#define PB_OCN_BAR2 (0x418)
+#define PB_SDRAM_BAR1 (0x41C)
+#define PB_SDRAM_BAR2 (0x420)
+#define PB_MCR (0xC00)
+#define PB_MCMD (0xC04)
+
+#define HLP_B0_ADDR (0x000)
+#define HLP_B1_ADDR (0x010)
+#define HLP_B2_ADDR (0x020)
+#define HLP_B3_ADDR (0x030)
+
+#define HLP_B0_MASK (0x004)
+#define HLP_B1_MASK (0x014)
+#define HLP_B2_MASK (0x024)
+#define HLP_B3_MASK (0x034)
+
+#define HLP_B0_CTRL0 (0x008)
+#define HLP_B1_CTRL0 (0x018)
+#define HLP_B2_CTRL0 (0x028)
+#define HLP_B3_CTRL0 (0x038)
+
+#define HLP_B0_CTRL1 (0x00C)
+#define HLP_B1_CTRL1 (0x01C)
+#define HLP_B2_CTRL1 (0x02C)
+#define HLP_B3_CTRL1 (0x03C)
+
+#define PCI_CSR (0x004)
+#define PCI_P2O_BAR0 (0x010)
+#define PCI_P2O_BAR0_UPPER (0x014)
+#define PCI_P2O_BAR2 (0x018)
+#define PCI_P2O_BAR2_UPPER (0x01C)
+#define PCI_P2O_BAR3 (0x020)
+#define PCI_P2O_BAR3_UPPER (0x024)
+
+#define PCI_MISC_CSR (0x040)
+#define PCI_P2O_PAGE_SIZES (0x04C)
+
+#define PCI_PCIX_STAT (0x0F4)
+
+#define PCI_IRP_STAT (0x184)
+
+#define PCI_PFAB_BAR0 (0x204)
+#define PCI_PFAB_BAR0_UPPER (0x208)
+#define PCI_PFAB_IO (0x20C)
+#define PCI_PFAB_IO_UPPER (0x210)
+
+#define PCI_PFAB_MEM32 (0x214)
+#define PCI_PFAB_MEM32_REMAP (0x218)
+#define PCI_PFAB_MEM32_MASK (0x21C)
+
+#define CG_PLL0_CTRL0 (0x210)
+#define CG_PLL0_CTRL1 (0x214)
+#define CG_PLL1_CTRL0 (0x220)
+#define CG_PLL1_CTRL1 (0x224)
+#define CG_PWRUP_STATUS (0x234)
+
+#define MPIC_CSR(n) (0x30C + (n * 0x40))
+
+#define SD_CTRL (0x000)
+#define SD_STATUS (0x004)
+#define SD_TIMING (0x008)
+#define SD_REFRESH (0x00C)
+#define SD_INT_STATUS (0x010)
+#define SD_INT_ENABLE (0x014)
+#define SD_INT_SET (0x018)
+#define SD_D0_CTRL (0x020)
+#define SD_D1_CTRL (0x024)
+#define SD_D0_BAR (0x028)
+#define SD_D1_BAR (0x02C)
+#define SD_ECC_CTRL (0x040)
+#define SD_DLL_STATUS (0x250)
+
+#define TS_SD_CTRL_ENABLE (1 << 31)
+
+#define PB_ERRCS_ES (1 << 1)
+#define PB_ISR_PBS_RD_ERR (1 << 8)
+#define PCI_IRP_STAT_P_CSR (1 << 23)
+
+/*
+ * I2C : Register address offset definitions
+ */
+#define I2C_CNTRL1 (0x00000000)
+#define I2C_CNTRL2 (0x00000004)
+#define I2C_RD_DATA (0x00000008)
+#define I2C_TX_DATA (0x0000000c)
+
+/*
+ * I2C : Register Bit Masks and Reset Values
+ * definitions for every register
+ */
+
+/* I2C_CNTRL1 : Reset Value */
+#define I2C_CNTRL1_RESET_VALUE (0x0000000a)
+
+/* I2C_CNTRL1 : Register Bits Masks Definitions */
+#define I2C_CNTRL1_DEVCODE (0x0000000f)
+#define I2C_CNTRL1_PAGE (0x00000700)
+#define I2C_CNTRL1_BYTADDR (0x00ff0000)
+#define I2C_CNTRL1_I2CWRITE (0x01000000)
+
+/* I2C_CNTRL1 : Read/Write Bit Mask Definition */
+#define I2C_CNTRL1_RWMASK (0x01ff070f)
+
+/* I2C_CNTRL1 : Unused/Reserved bits Definition */
+#define I2C_CNTRL1_RESERVED (0xfe00f8f0)
+
+/* I2C_CNTRL2 : Reset Value */
+#define I2C_CNTRL2_RESET_VALUE (0x00000000)
+
+/* I2C_CNTRL2 : Register Bits Masks Definitions */
+#define I2C_CNTRL2_SIZE (0x00000003)
+#define I2C_CNTRL2_LANE (0x0000000c)
+#define I2C_CNTRL2_MULTIBYTE (0x00000010)
+#define I2C_CNTRL2_START (0x00000100)
+#define I2C_CNTRL2_WR_STATUS (0x00010000)
+#define I2C_CNTRL2_RD_STATUS (0x00020000)
+#define I2C_CNTRL2_I2C_TO_ERR (0x04000000)
+#define I2C_CNTRL2_I2C_CFGERR (0x08000000)
+#define I2C_CNTRL2_I2C_CMPLT (0x10000000)
+
+/* I2C_CNTRL2 : Read/Write Bit Mask Definition */
+#define I2C_CNTRL2_RWMASK (0x0000011f)
+
+/* I2C_CNTRL2 : Unused/Reserved bits Definition */
+#define I2C_CNTRL2_RESERVED (0xe3fcfee0)
+
+/* I2C_RD_DATA : Reset Value */
+#define I2C_RD_DATA_RESET_VALUE (0x00000000)
+
+/* I2C_RD_DATA : Register Bits Masks Definitions */
+#define I2C_RD_DATA_RBYTE0 (0x000000ff)
+#define I2C_RD_DATA_RBYTE1 (0x0000ff00)
+#define I2C_RD_DATA_RBYTE2 (0x00ff0000)
+#define I2C_RD_DATA_RBYTE3 (0xff000000)
+
+/* I2C_RD_DATA : Read/Write Bit Mask Definition */
+#define I2C_RD_DATA_RWMASK (0x00000000)
+
+/* I2C_RD_DATA : Unused/Reserved bits Definition */
+#define I2C_RD_DATA_RESERVED (0x00000000)
+
+/* I2C_TX_DATA : Reset Value */
+#define I2C_TX_DATA_RESET_VALUE (0x00000000)
+
+/* I2C_TX_DATA : Register Bits Masks Definitions */
+#define I2C_TX_DATA_TBYTE0 (0x000000ff)
+#define I2C_TX_DATA_TBYTE1 (0x0000ff00)
+#define I2C_TX_DATA_TBYTE2 (0x00ff0000)
+#define I2C_TX_DATA_TBYTE3 (0xff000000)
+
+/* I2C_TX_DATA : Read/Write Bit Mask Definition */
+#define I2C_TX_DATA_RWMASK (0xffffffff)
+
+/* I2C_TX_DATA : Unused/Reserved bits Definition */
+#define I2C_TX_DATA_RESERVED (0x00000000)
+
+#define TSI108_I2C_OFFSET 0x7000 /* offset for general use I2C channel */
+#define TSI108_I2C_SDRAM_OFFSET 0x4400 /* offset for SPD I2C channel */
+
+#define I2C_EEPROM_DEVCODE 0xA /* standard I2C EEPROM device code */
+
+/* I2C status codes */
+
+#define TSI108_I2C_SUCCESS 0
+#define TSI108_I2C_PARAM_ERR 1
+#define TSI108_I2C_TIMEOUT_ERR 2
+#define TSI108_I2C_IF_BUSY 3
+#define TSI108_I2C_IF_ERROR 4
+
+#endif /* _TSI108_H_ */
diff --git a/lib_avr32/avr32_linux.c b/lib_avr32/avr32_linux.c
index d128dfb..6095e2f 100644
--- a/lib_avr32/avr32_linux.c
+++ b/lib_avr32/avr32_linux.c
@@ -27,7 +27,7 @@
#include <asm/addrspace.h>
#include <asm/io.h>
#include <asm/setup.h>
-#include <asm/arch/platform.h>
+#include <asm/arch/clk.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -133,7 +133,7 @@
params->hdr.size = tag_size(tag_clock);
params->u.clock.clock_id = ACLOCK_HSB;
params->u.clock.clock_flags = 0;
- params->u.clock.clock_hz = pm_get_clock_freq(CLOCK_HSB);
+ params->u.clock.clock_hz = get_hsb_clk_rate();
#endif
return tag_next(params);
diff --git a/lib_avr32/board.c b/lib_avr32/board.c
index 02c106b..265328a 100644
--- a/lib_avr32/board.c
+++ b/lib_avr32/board.c
@@ -47,11 +47,14 @@
static unsigned long mem_malloc_end = 0;
static unsigned long mem_malloc_brk = 0;
-/* The malloc area is wherever the board wants it to be */
+/* The malloc area is right below the monitor image in RAM */
static void mem_malloc_init(void)
{
- mem_malloc_start = CFG_MALLOC_START;
- mem_malloc_end = CFG_MALLOC_END;
+ unsigned long monitor_addr;
+
+ monitor_addr = CFG_MONITOR_BASE + gd->reloc_off;
+ mem_malloc_end = monitor_addr;
+ mem_malloc_start = mem_malloc_end - CFG_MALLOC_LEN;
mem_malloc_brk = mem_malloc_start;
printf("malloc: Using memory from 0x%08lx to 0x%08lx\n",
@@ -73,6 +76,50 @@
return ((void *)old);
}
+#ifdef CFG_DMA_ALLOC_LEN
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+static unsigned long dma_alloc_start;
+static unsigned long dma_alloc_end;
+static unsigned long dma_alloc_brk;
+
+static void dma_alloc_init(void)
+{
+ unsigned long monitor_addr;
+
+ monitor_addr = CFG_MONITOR_BASE + gd->reloc_off;
+ dma_alloc_end = monitor_addr - CFG_MALLOC_LEN;
+ dma_alloc_start = dma_alloc_end - CFG_DMA_ALLOC_LEN;
+ dma_alloc_brk = dma_alloc_start;
+
+ printf("DMA: Using memory from 0x%08lx to 0x%08lx\n",
+ dma_alloc_start, dma_alloc_end);
+
+ dcache_invalidate_range(cached(dma_alloc_start),
+ dma_alloc_end - dma_alloc_start);
+}
+
+void *dma_alloc_coherent(size_t len, unsigned long *handle)
+{
+ unsigned long paddr = dma_alloc_brk;
+
+ if (dma_alloc_brk + len > dma_alloc_end)
+ return NULL;
+
+ dma_alloc_brk = ((paddr + len + CFG_DCACHE_LINESZ - 1)
+ & ~(CFG_DCACHE_LINESZ - 1));
+
+ *handle = paddr;
+ return uncached(paddr);
+}
+#else
+static inline void dma_alloc_init(void)
+{
+
+}
+#endif
+
static int init_baudrate(void)
{
char tmp[64];
@@ -122,40 +169,152 @@
printf("at address 0x%08lx\n", gd->bd->bi_flashstart);
}
-void start_u_boot (void)
+void board_init_f(ulong board_type)
{
gd_t gd_data;
+ gd_t *new_gd;
+ bd_t *bd;
+ unsigned long *new_sp;
+ unsigned long monitor_len;
+ unsigned long monitor_addr;
+ unsigned long addr;
+ long sdram_size;
/* Initialize the global data pointer */
memset(&gd_data, 0, sizeof(gd_data));
gd = &gd_data;
- monitor_flash_len = _edata - _text;
-
/* Perform initialization sequence */
+ board_early_init_f();
cpu_init();
- timer_init();
env_init();
init_baudrate();
serial_init();
console_init_f();
display_banner();
+ sdram_size = initdram(board_type);
- board_init_memories();
+ /* If we have no SDRAM, we can't go on */
+ if (sdram_size <= 0)
+ panic("No working SDRAM available\n");
+
+ /*
+ * Now that we have DRAM mapped and working, we can
+ * relocate the code and continue running from DRAM.
+ *
+ * Reserve memory at end of RAM for (top down in that order):
+ * - u-boot image
+ * - heap for malloc()
+ * - board info struct
+ * - global data struct
+ * - stack
+ */
+ addr = CFG_SDRAM_BASE + sdram_size;
+ monitor_len = _end - _text;
+
+ /*
+ * Reserve memory for u-boot code, data and bss.
+ * Round down to next 4 kB limit.
+ */
+ addr -= monitor_len;
+ addr &= ~(4096UL - 1);
+ monitor_addr = addr;
+
+ /* Reserve memory for malloc() */
+ addr -= CFG_MALLOC_LEN;
+
+#ifdef CFG_DMA_ALLOC_LEN
+ /* Reserve DMA memory (must be cache aligned) */
+ addr &= ~(CFG_DCACHE_LINESZ - 1);
+ addr -= CFG_DMA_ALLOC_LEN;
+#endif
+
+ /* Allocate a Board Info struct on a word boundary */
+ addr -= sizeof(bd_t);
+ addr &= ~3UL;
+ gd->bd = bd = (bd_t *)addr;
+
+ /* Allocate a new global data copy on a 8-byte boundary. */
+ addr -= sizeof(gd_t);
+ addr &= ~7UL;
+ new_gd = (gd_t *)addr;
+
+ /* And finally, a new, bigger stack. */
+ new_sp = (unsigned long *)addr;
+ gd->stack_end = addr;
+ *(--new_sp) = 0;
+ *(--new_sp) = 0;
+
+ /*
+ * Initialize the board information struct with the
+ * information we have.
+ */
+ bd->bi_dram[0].start = CFG_SDRAM_BASE;
+ bd->bi_dram[0].size = sdram_size;
+ bd->bi_baudrate = gd->baudrate;
+
+ memcpy(new_gd, gd, sizeof(gd_t));
+
+ relocate_code((unsigned long)new_sp, new_gd, monitor_addr);
+}
+
+void board_init_r(gd_t *new_gd, ulong dest_addr)
+{
+ extern void malloc_bin_reloc (void);
+#ifndef CFG_ENV_IS_NOWHERE
+ extern char * env_name_spec;
+#endif
+ cmd_tbl_t *cmdtp;
+ bd_t *bd;
+
+ gd = new_gd;
+ bd = gd->bd;
+
+ gd->flags |= GD_FLG_RELOC;
+ gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+
+ monitor_flash_len = _edata - _text;
+
+ /*
+ * We have to relocate the command table manually
+ */
+ for (cmdtp = &__u_boot_cmd_start;
+ cmdtp != &__u_boot_cmd_end; cmdtp++) {
+ unsigned long addr;
+
+ addr = (unsigned long)cmdtp->cmd + gd->reloc_off;
+ cmdtp->cmd = (typeof(cmdtp->cmd))addr;
+
+ addr = (unsigned long)cmdtp->name + gd->reloc_off;
+ cmdtp->name = (typeof(cmdtp->name))addr;
+
+ if (cmdtp->usage) {
+ addr = (unsigned long)cmdtp->usage + gd->reloc_off;
+ cmdtp->usage = (typeof(cmdtp->usage))addr;
+ }
+#ifdef CFG_LONGHELP
+ if (cmdtp->help) {
+ addr = (unsigned long)cmdtp->help + gd->reloc_off;
+ cmdtp->help = (typeof(cmdtp->help))addr;
+ }
+#endif
+ }
+
+ /* there are some other pointer constants we must deal with */
+#ifndef CFG_ENV_IS_NOWHERE
+ env_name_spec += gd->reloc_off;
+#endif
+
+ timer_init();
mem_malloc_init();
-
- gd->bd = malloc(sizeof(bd_t));
- memset(gd->bd, 0, sizeof(bd_t));
- gd->bd->bi_baudrate = gd->baudrate;
- gd->bd->bi_dram[0].start = CFG_SDRAM_BASE;
- gd->bd->bi_dram[0].size = gd->sdram_size;
-
+ malloc_bin_reloc();
+ dma_alloc_init();
board_init_info();
flash_init();
- if (gd->bd->bi_flashsize)
+ if (bd->bi_flashsize)
display_flash_config();
- if (gd->bd->bi_dram[0].size)
+ if (bd->bi_dram[0].size)
display_dram_config();
gd->bd->bi_boot_params = malloc(CFG_BOOTPARAMS_LEN);
@@ -169,6 +328,13 @@
jumptable_init();
console_init_r();
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#if defined(CONFIG_NET_MULTI)
+ puts("Net: ");
+#endif
+ eth_initialize(gd->bd);
+#endif
+
for (;;) {
main_loop();
}
diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile
index 3197fe1..a7aaef7 100644
--- a/lib_blackfin/Makefile
+++ b/lib_blackfin/Makefile
@@ -1,7 +1,7 @@
#
# U-boot Makefile
#
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
#
include $(TOPDIR)/config.mk
diff --git a/lib_blackfin/bf533_linux.c b/lib_blackfin/bf533_linux.c
index 1b0d90a..3b9c4df 100644
--- a/lib_blackfin/bf533_linux.c
+++ b/lib_blackfin/bf533_linux.c
@@ -1,7 +1,7 @@
/*
* U-boot - bf533_linux.c
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
/* Dummy functions, currently not in Use */
diff --git a/lib_blackfin/bf533_string.c b/lib_blackfin/bf533_string.c
index 85b1150..1553f1b 100644
--- a/lib_blackfin/bf533_string.c
+++ b/lib_blackfin/bf533_string.c
@@ -1,7 +1,7 @@
/*
* U-boot - bf533_string.c Contains library routines.
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,22 +21,16 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
#include <asm/setup.h>
-#include <asm/page.h>
#include <config.h>
#include <asm/blackfin.h>
#include <asm/io.h>
-
-extern void blackfin_icache_flush_range(const void *, const void *);
-extern void blackfin_dcache_flush_range(const void *, const void *);
-extern void *memcpy_ASM(void *dest, const void *src, size_t count);
-
-void *dma_memcpy(void *, const void *, size_t);
+#include "cache.h"
char *strcpy(char *dest, const char *src)
{
@@ -118,44 +112,7 @@
return __res1;
}
-/*
- * memcpy - Copy one area of memory to another
- * @dest: Where to copy to
- * @src: Where to copy from
- * @count: The size of the area.
- *
- * You should not use this function to access IO space, use memcpy_toio()
- * or memcpy_fromio() instead.
- */
-void *memcpy(void *dest, const void *src, size_t count)
-{
- char *tmp = (char *)dest, *s = (char *)src;
-
- /* L1_ISRAM can only be accessed via dma */
- if ((tmp >= (char *)L1_ISRAM) && (tmp < (char *)L1_ISRAM_END)) {
- /* L1 is the destination */
- dma_memcpy(dest, src, count);
-
- if (icache_status()) {
- blackfin_icache_flush_range(src, src + count);
- }
- } else if ((s >= (char *)L1_ISRAM) && (s < (char *)L1_ISRAM_END)) {
- /* L1 is the source */
- dma_memcpy(dest, src, count);
-
- if (icache_status()) {
- blackfin_icache_flush_range(dest, dest + count);
- }
- if (dcache_status()) {
- blackfin_dcache_flush_range(dest, dest + count);
- }
- } else {
- memcpy_ASM(dest, src, count);
- }
- return dest;
-}
-
-void *dma_memcpy(void *dest, const void *src, size_t count)
+static void *dma_memcpy(void *dest, const void *src, size_t count)
{
*pMDMA_D0_IRQ_STATUS = DMA_DONE | DMA_ERR;
@@ -189,3 +146,40 @@
src += count;
return dest;
}
+
+/*
+ * memcpy - Copy one area of memory to another
+ * @dest: Where to copy to
+ * @src: Where to copy from
+ * @count: The size of the area.
+ *
+ * You should not use this function to access IO space, use memcpy_toio()
+ * or memcpy_fromio() instead.
+ */
+extern void *memcpy_ASM(void *dest, const void *src, size_t count);
+void *memcpy(void *dest, const void *src, size_t count)
+{
+ char *tmp = (char *) dest, *s = (char *) src;
+
+ if (dcache_status()) {
+ blackfin_dcache_flush_range(src, src+count);
+ }
+ /* L1_ISRAM can only be accessed via dma */
+ if ((tmp >= (char *)L1_ISRAM) && (tmp < (char *)L1_ISRAM_END)) {
+ /* L1 is the destination */
+ dma_memcpy(dest,src,count);
+ } else if ((s >= (char *)L1_ISRAM) && (s < (char *)L1_ISRAM_END)) {
+ /* L1 is the source */
+ dma_memcpy(dest,src,count);
+
+ if (icache_status()) {
+ blackfin_icache_flush_range(dest, dest+count);
+ }
+ if (dcache_status()) {
+ blackfin_dcache_invalidate_range(dest, dest+count);
+ }
+ } else {
+ memcpy_ASM(dest,src,count);
+ }
+ return dest;
+}
diff --git a/lib_blackfin/blackfin_board.h b/lib_blackfin/blackfin_board.h
index e0b96da..1353421 100644
--- a/lib_blackfin/blackfin_board.h
+++ b/lib_blackfin/blackfin_board.h
@@ -1,7 +1,7 @@
/*
* U-boot - blackfin_board.h
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#ifndef __BLACKFIN_BOARD_H__
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index 1a0a282..1538da3 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -1,7 +1,7 @@
/*
* U-boot - board.c First C file to be called contains init routines
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
#include <common.h>
@@ -182,7 +182,7 @@
icplb_table[j][1] = L1_IMEMORY;
j++;
- for (i = 0; i <= CONFIG_MEM_SIZE / 4; i++) {
+ for (i = 0; i < CONFIG_MEM_SIZE / 4; i++) {
icplb_table[j][0] = (i * 4 * 1024 * 1024);
if (i * 4 * 1024 * 1024 <= CFG_MONITOR_BASE
&& (i + 1) * 4 * 1024 * 1024 >= CFG_MONITOR_BASE) {
@@ -193,14 +193,19 @@
j++;
}
#if defined(CONFIG_BF561)
+ /* MAC space */
+ icplb_table[j][0] = 0x2C000000;
+ icplb_table[j][1] = SDRAM_INON_CHBL;
+ j++;
/* Async Memory space */
for (i = 0; i < 3; i++) {
- icplb_table[j++][0] = 0x20000000 + i * 4 * 1024 * 1024;
- icplb_table[j++][1] = SDRAM_IGENERIC;
+ icplb_table[j][0] = 0x20000000 + i * 4 * 1024 * 1024;
+ icplb_table[j][1] = SDRAM_INON_CHBL;
+ j++;
}
#else
icplb_table[j][0] = 0x20000000;
- icplb_table[j][1] = SDRAM_IGENERIC;
+ icplb_table[j][1] = SDRAM_INON_CHBL;
#endif
j = 0;
dcplb_table[j][0] = 0xFF800000;
@@ -220,13 +225,15 @@
#if defined(CONFIG_BF561)
/* MAC space */
- dcplb_table[j++][0] = CONFIG_ASYNC_EBIU_BASE;
- dcplb_table[j++][1] = SDRAM_EBIU;
+ dcplb_table[j][0] = 0x2C000000;
+ dcplb_table[j][1] = SDRAM_EBIU;
+ j++;
/* Flash space */
- for (i = 0; i < 2; i++) {
- dcplb_table[j++][0] = 0x20000000 + i * 4 * 1024 * 1024;
- dcplb_table[j++][1] = SDRAM_EBIU;
+ for (i = 0; i < 3; i++) {
+ dcplb_table[j][0] = 0x20000000 + i * 4 * 1024 * 1024;
+ dcplb_table[j][1] = SDRAM_EBIU;
+ j++;
}
#else
dcplb_table[j][0] = 0x20000000;
diff --git a/lib_blackfin/cache.c b/lib_blackfin/cache.c
index a15914b..9d71bcb 100644
--- a/lib_blackfin/cache.c
+++ b/lib_blackfin/cache.c
@@ -1,7 +1,7 @@
/*
* U-boot - cache.c
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,17 +21,15 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
/* for now: just dummy functions to satisfy the linker */
#include <config.h>
#include <common.h>
#include <asm/blackfin.h>
-
-extern void blackfin_icache_flush_range(unsigned long, unsigned long);
-extern void blackfin_dcache_flush_range(unsigned long, unsigned long);
+#include "cache.h"
void flush_cache(unsigned long dummy1, unsigned long dummy2)
{
@@ -43,9 +41,9 @@
return;
if (icache_status())
- blackfin_icache_flush_range(dummy1, dummy1 + dummy2);
+ blackfin_icache_flush_range((void*)dummy1, (void*)(dummy1 + dummy2));
if (dcache_status())
- blackfin_dcache_flush_range(dummy1, dummy1 + dummy2);
+ blackfin_dcache_flush_range((void*)dummy1, (void*)(dummy1 + dummy2));
return;
}
diff --git a/lib_blackfin/cache.h b/lib_blackfin/cache.h
new file mode 100644
index 0000000..3ea6809
--- /dev/null
+++ b/lib_blackfin/cache.h
@@ -0,0 +1,35 @@
+/*
+ * U-boot - prototypes for cache handling functions.
+ *
+ * Copyright (c) 2005-2007 Analog Devices Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _LIB_BLACKFIN_CACHE_H_
+#define _LIB_BLACKFIN_CACHE_H_
+
+extern void blackfin_icache_flush_range(const void *, const void *);
+extern void blackfin_dcache_flush_range(const void *, const void *);
+extern void blackfin_dcache_invalidate_range(const void *, const void *);
+
+#endif
diff --git a/lib_blackfin/memcmp.S b/lib_blackfin/memcmp.S
index fcea5b3..9b58832 100644
--- a/lib_blackfin/memcmp.S
+++ b/lib_blackfin/memcmp.S
@@ -1,17 +1,8 @@
/*
- * File: arch/blackfin/lib/memcmp.S
- * Based on:
- * Author:
+ * File: memcmp.S
*
- * Created:
- * Description:
- *
- * Rev: $Id: memcmp.S 2386 2006-11-01 04:57:26Z magicyang $
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2007 Analog Devices Inc.
+ * Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/lib_blackfin/memcpy.S b/lib_blackfin/memcpy.S
index a73ff90..24577be 100644
--- a/lib_blackfin/memcpy.S
+++ b/lib_blackfin/memcpy.S
@@ -1,22 +1,8 @@
/*
- * File: arch/blackfin/lib/memcpy.S
- * Based on:
- * Author:
+ * File: memcpy.S
*
- * Created:
- * Description: internal version of memcpy(), issued by the compiler
- * to copy blocks of data around.
- * This is really memmove() - it has to be able to deal with
- * possible overlaps, because that ambiguity is when the compiler
- * gives up and calls a function. We have our own, internal version
- * so that we get something we trust, even if the user has redefined
- * the normal symbol.
- * Rev: $Id: memcpy.S 2775 2007-02-21 13:58:44Z hennerich $
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2007 Analog Devices Inc.
+ * Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -33,6 +19,7 @@
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+
.align 2
.globl _memcpy_ASM;
diff --git a/lib_blackfin/memmove.S b/lib_blackfin/memmove.S
index 79558f9..46f79ed 100644
--- a/lib_blackfin/memmove.S
+++ b/lib_blackfin/memmove.S
@@ -1,17 +1,8 @@
/*
- * File: arch/blackfin/lib/memmove.S
- * Based on:
- * Author:
+ * File: memmove.S
*
- * Created:
- * Description:
- *
- * Rev: $Id: memmove.S 2205 2006-09-23 07:53:49Z vapier $
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2007 Analog Devices Inc.
+ * Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/lib_blackfin/memset.S b/lib_blackfin/memset.S
index 7e6ee19..c33c551 100644
--- a/lib_blackfin/memset.S
+++ b/lib_blackfin/memset.S
@@ -1,17 +1,8 @@
/*
- * File: arch/blackfin/lib/memset.S
- * Based on:
- * Author:
+ * File: memset.S
*
- * Created:
- * Description:
- *
- * Rev: $Id: memset.S 2769 2007-02-19 16:45:53Z hennerich $
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2007 Analog Devices Inc.
+ * Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -29,7 +20,6 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-
.align 2
/*
diff --git a/lib_blackfin/muldi3.c b/lib_blackfin/muldi3.c
index da55711..bf1ca53 100644
--- a/lib_blackfin/muldi3.c
+++ b/lib_blackfin/muldi3.c
@@ -1,7 +1,7 @@
/*
* U-boot - muldi3.c contains routines for mult and div
*
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,8 +18,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
/* Generic function got from GNU gcc package, libgcc2.c */
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 24e8e97..9e85cdd 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -310,10 +310,6 @@
prt_8260_clks,
#endif /* CONFIG_8260 */
-#if defined(CONFIG_MPC83XX)
- print_clock_conf,
-#endif
-
checkcpu,
#if defined(CONFIG_MPC5xxx)
prt_mpc5xxx_clks,
@@ -568,7 +564,9 @@
bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */
bd->bi_plb_busfreq = gd->bus_clk;
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
bd->bi_pci_busfreq = get_PCI_freq ();
bd->bi_opbfreq = get_OPB_freq ();
#elif defined(CONFIG_XILINX_ML300)
diff --git a/lib_ppc/extable.c b/lib_ppc/extable.c
index d92f142..b14d661 100644
--- a/lib_ppc/extable.c
+++ b/lib_ppc/extable.c
@@ -37,6 +37,8 @@
* on our cache or tlb entries.
*/
+DECLARE_GLOBAL_DATA_PTR;
+
struct exception_table_entry
{
unsigned long insn, fixup;
@@ -55,13 +57,25 @@
long diff;
mid = (last - first) / 2 + first;
- diff = mid->insn - value;
- if (diff == 0)
- return mid->fixup;
- else if (diff < 0)
- first = mid+1;
+ if ((ulong) mid > CFG_MONITOR_BASE) {
+ /* exception occurs in FLASH, before u-boot relocation.
+ * No relocation offset is needed.
+ */
+ diff = mid->insn - value;
+ if (diff == 0)
+ return mid->fixup;
+ } else {
+ /* exception occurs in RAM, after u-boot relocation.
+ * A relocation offset should be added.
+ */
+ diff = (mid->insn + gd->reloc_off) - value;
+ if (diff == 0)
+ return (mid->fixup + gd->reloc_off);
+ }
+ if (diff < 0)
+ first = mid + 1;
else
- last = mid-1;
+ last = mid - 1;
}
return 0;
}
@@ -75,8 +89,11 @@
/* There is only the kernel to search. */
ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr);
+ /* if the serial port does not hang in exception, printf can be used */
+#if !defined(CFG_SERIAL_HANG_IN_EXCEPTION)
if (ex_tab_message)
printf("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret);
+#endif
if (ret) return ret;
return 0;
diff --git a/libfdt/fdt.c b/libfdt/fdt.c
index 4b1c8ab..212b838 100644
--- a/libfdt/fdt.c
+++ b/libfdt/fdt.c
@@ -23,7 +23,7 @@
#include "libfdt_internal.h"
-int _fdt_check_header(const void *fdt)
+int fdt_check_header(const void *fdt)
{
if (fdt_magic(fdt) == FDT_MAGIC) {
/* Complete tree */
@@ -72,7 +72,7 @@
int fdt_move(const void *fdt, void *buf, int bufsize)
{
- int err = _fdt_check_header(fdt);
+ int err = fdt_check_header(fdt);
if (err)
return err;
diff --git a/libfdt/fdt_ro.c b/libfdt/fdt_ro.c
index ce01dc7..4e2c325 100644
--- a/libfdt/fdt_ro.c
+++ b/libfdt/fdt_ro.c
@@ -25,7 +25,7 @@
#define CHECK_HEADER(fdt) { \
int err; \
- if ((err = _fdt_check_header(fdt)) != 0) \
+ if ((err = fdt_check_header(fdt)) != 0) \
return err; \
}
@@ -188,7 +188,7 @@
int offset, nextoffset;
int err;
- if ((err = _fdt_check_header(fdt)) != 0)
+ if ((err = fdt_check_header(fdt)) != 0)
goto fail;
err = -FDT_ERR_BADOFFSET;
@@ -329,3 +329,74 @@
return tag;
}
+
+/*
+ * Return the number of used reserve map entries and total slots available.
+ */
+int fdt_num_reservemap(void *fdt, int *used, int *total)
+{
+ struct fdt_reserve_entry *re;
+ int start;
+ int end;
+ int err = fdt_check_header(fdt);
+
+ if (err != 0)
+ return err;
+
+ start = fdt_off_mem_rsvmap(fdt);
+
+ /*
+ * Convention is that the reserve map is before the dt_struct,
+ * but it does not have to be.
+ */
+ end = fdt_totalsize(fdt);
+ if (end > fdt_off_dt_struct(fdt))
+ end = fdt_off_dt_struct(fdt);
+ if (end > fdt_off_dt_strings(fdt))
+ end = fdt_off_dt_strings(fdt);
+
+ /*
+ * Since the reserved area list is zero terminated, you get one fewer.
+ */
+ if (total)
+ *total = ((end - start) / sizeof(struct fdt_reserve_entry)) - 1;
+
+ if (used) {
+ *used = 0;
+ while (start < end) {
+ re = (struct fdt_reserve_entry *)(fdt + start);
+ if (re->size == 0)
+ return 0; /* zero size terminates the list */
+
+ *used += 1;
+ start += sizeof(struct fdt_reserve_entry);
+ }
+ /*
+ * If we get here, there was no zero size termination.
+ */
+ return -FDT_ERR_BADLAYOUT;
+ }
+ return 0;
+}
+
+/*
+ * Return the nth reserve map entry.
+ */
+int fdt_get_reservemap(void *fdt, int n, struct fdt_reserve_entry *re)
+{
+ int used;
+ int total;
+ int err;
+
+ err = fdt_num_reservemap(fdt, &used, &total);
+ if (err != 0)
+ return err;
+
+ if (n >= total)
+ return -FDT_ERR_NOSPACE;
+ if (re) {
+ *re = *(struct fdt_reserve_entry *)
+ _fdt_offset_ptr(fdt, n * sizeof(struct fdt_reserve_entry));
+ }
+ return 0;
+}
diff --git a/libfdt/fdt_rw.c b/libfdt/fdt_rw.c
index b33fbf4..aaafc53 100644
--- a/libfdt/fdt_rw.c
+++ b/libfdt/fdt_rw.c
@@ -27,7 +27,7 @@
{
int err;
- if ((err = _fdt_check_header(fdt)))
+ if ((err = fdt_check_header(fdt)))
return err;
if (fdt_version(fdt) < 0x11)
return -FDT_ERR_BADVERSION;
diff --git a/libfdt/fdt_wip.c b/libfdt/fdt_wip.c
index 261b9b0..2d2ed37 100644
--- a/libfdt/fdt_wip.c
+++ b/libfdt/fdt_wip.c
@@ -110,3 +110,28 @@
nop_region(fdt_offset_ptr(fdt, nodeoffset, 0), endoffset - nodeoffset);
return 0;
}
+
+/*
+ * Replace a reserve map entry in the nth slot.
+ */
+int fdt_replace_reservemap_entry(void *fdt, int n, uint64_t addr, uint64_t size)
+{
+ struct fdt_reserve_entry *re;
+ int used;
+ int total;
+ int err;
+
+ err = fdt_num_reservemap(fdt, &used, &total);
+ if (err != 0)
+ return err;
+
+ if (n >= total)
+ return -FDT_ERR_NOSPACE;
+ re = (struct fdt_reserve_entry *)
+ (fdt + fdt_off_mem_rsvmap(fdt) +
+ (n * sizeof(struct fdt_reserve_entry)));
+ re->address = cpu_to_fdt64(addr);
+ re->size = cpu_to_fdt64(size);
+
+ return 0;
+}
diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile
index ce39032..ec1be5a 100644
--- a/nand_spl/board/amcc/sequoia/Makefile
+++ b/nand_spl/board/amcc/sequoia/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2006
+# (C) Copyright 2006-2007
# Stefan Roese, DENX Software Engineering, sr@denx.de.
#
# See file CREDITS for list of people who contributed to this
diff --git a/net/eth.c b/net/eth.c
index cca9392..0fc2211 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -52,9 +52,12 @@
extern int rtl8169_initialize(bd_t*);
extern int scc_initialize(bd_t*);
extern int skge_initialize(bd_t*);
+extern int tsi108_eth_initialize(bd_t*);
extern int tsec_initialize(bd_t*, int, char *);
extern int npe_initialize(bd_t *);
extern int uec_initialize(int);
+extern int bfin_EMAC_initialize(bd_t *);
+extern int atstk1000_eth_initialize(bd_t *);
static struct eth_device *eth_devices, *eth_current;
@@ -249,12 +252,21 @@
#ifdef CONFIG_NS8382X
ns8382x_initialize(bis);
#endif
+#if defined(CONFIG_TSI108_ETH)
+ tsi108_eth_initialize(bis);
+#endif
#if defined(CONFIG_RTL8139)
rtl8139_initialize(bis);
#endif
#if defined(CONFIG_RTL8169)
rtl8169_initialize(bis);
#endif
+#if defined(CONFIG_BF537)
+ bfin_EMAC_initialize(bis);
+#endif
+#if defined(CONFIG_ATSTK1000)
+ atstk1000_eth_initialize(bis);
+#endif
if (!eth_devices) {
puts ("No ethernet found.\n");
diff --git a/net/net.c b/net/net.c
index 1d1c98f..2ff7bfc 100644
--- a/net/net.c
+++ b/net/net.c
@@ -1424,6 +1424,26 @@
/* XXX point to ip packet */
(*packetHandler)((uchar *)ip, 0, 0, 0);
return;
+ case ICMP_ECHO_REQUEST:
+#ifdef ET_DEBUG
+ printf ("Got ICMP ECHO REQUEST, return %d bytes \n",
+ ETHER_HDR_SIZE + len);
+#endif
+ memcpy (&et->et_dest[0], &et->et_src[0], 6);
+ memcpy (&et->et_src[ 0], NetOurEther, 6);
+
+ ip->ip_sum = 0;
+ ip->ip_off = 0;
+ NetCopyIP((void*)&ip->ip_dst, &ip->ip_src);
+ NetCopyIP((void*)&ip->ip_src, &NetOurIP);
+ ip->ip_sum = ~NetCksum((uchar *)ip, IP_HDR_SIZE_NO_UDP >> 1);
+
+ icmph->type = ICMP_ECHO_REPLY;
+ icmph->checksum = 0;
+ icmph->checksum = ~NetCksum((uchar *)icmph,
+ (len - IP_HDR_SIZE_NO_UDP) >> 1);
+ (void) eth_send((uchar *)et, ETHER_HDR_SIZE + len);
+ return;
#endif
default:
return;
