| # Fuchsia u-boot | |
| This repo contains a fork of [u-boot](README) that has been modified to boot | |
| [Fuchsia](https://fuchsia.dev/). | |
| ## Building | |
| This describes the basic build flow for a Linux x86_64 build host. You may be | |
| able to get it working with a different host machine, toolchain, build commands, | |
| etc but this is a known-working setup. | |
| ### Prerequisites | |
| You'll need to install the compiler toolchain. Toolchain source is hosted at the | |
| links below, refer to the included docs for instructions on how to build. You | |
| may also be able to find prebuilt toolchain binaries online. | |
| * gcc-linaro-7.3.1-2018.05 | |
| * Source: https://chrome-infra-packages.appspot.com/p/fuchsia/third_party/source/gcc/linaro/+/version:7.3-2018.05 | |
| * target architecture: `aarch64-none-elf` | |
| * gcc-arm-none-eabi-6-2017-q2-update | |
| * Source: https://chrome-infra-packages.appspot.com/p/fuchsia/third_party/source/gcc/arm/arm-none-eabi/+/version:6-2017-q2-update | |
| * target architecture: `arm-none-eabi` | |
| Once you have the toolchain binaries, place them in an adjacent directory | |
| `sdk/linaro/`, so the resulting tree looks like: | |
| * <parent_dir> | |
| * `u-boot/` | |
| * `sdk/` | |
| * `linaro/` | |
| * `gcc-arm-none-eabi-6-2017-q2-update/` | |
| * `bin/` | |
| * `lib/` | |
| * etc. | |
| * `gcc-linaro-7.3.1-2018.05-x86_64_aarch64-elf/` | |
| * `bin/` | |
| * `lib/` | |
| * etc. | |
| ### Compiling | |
| The simplest way to compile u-boot is to run: | |
| ``` | |
| ./mk g12a_estelle_bx --board_name estelle-b4 --dev | |
| ``` | |
| The resulting image will be at `build/u-boot.bin`. | |
| This will attempt to do some extra work that doesn't apply here, so you can | |
| ignore any errors about other bootloader components (BL2, BL31, BL32). As long | |
| as the binary was updated, the u-boot build completed successfully. |