| msgid "" |
| msgstr "" |
| "Project-Id-Version: R 3.5.0\n" |
| "Report-Msgid-Bugs-To: bugs.r-project.org\n" |
| "POT-Creation-Date: 2018-04-01 16:26\n" |
| "PO-Revision-Date: \n" |
| "Last-Translator: Łukasz Daniel <lukasz.daniel@gmail.com>\n" |
| "Language-Team: Łukasz Daniel <lukasz.daniel@gmail.com>\n" |
| "Language: pl_PL\n" |
| "MIME-Version: 1.0\n" |
| "Content-Type: text/plain; charset=UTF-8\n" |
| "Content-Transfer-Encoding: 8bit\n" |
| "na-Revision-Date: 2012-05-29 07:55+0100\n" |
| "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 " |
| "|| n%100>=20) ? 1 : 2);\n" |
| "X-Poedit-SourceCharset: UTF-8\n" |
| "X-Generator: Poedit 2.0.4\n" |
| |
| #. R/splineClasses.R: gettextf("%s needs package 'Matrix' correctly installed", "splineDesign(*, sparse=TRUE)") |
| #: R/splineClasses.R:0 |
| msgid "%s needs package 'Matrix' correctly installed" |
| msgstr "'%s' potrzebuje poprawnie zainstalowanego pakietu 'Matrix'" |
| |
| #. R/splines.R: stop("'degree' must be integer >= 1") |
| #: R/splines.R:0 |
| msgid "'degree' must be integer >= 1" |
| msgstr "'degree' musi być liczbą całkowitą >= 1" |
| |
| #. R/splineClasses.R: gettextf("'deriv' must be between 0 and %d", ord - 1) |
| #. R/splineClasses.R: gettextf("'deriv' must be between 0 and %d", ord - 1) |
| #: R/splineClasses.R:0 |
| msgid "'deriv' must be between 0 and %d" |
| msgstr "'deriv' musi być pomiędzy 0 a %d" |
| |
| #. R/splines.R: gettextf("'df' was too small; have used %d", ord - (1L - intercept)) |
| #. R/splines.R: gettextf("'df' was too small; have used %d", 1L + intercept) |
| #: R/splines.R:0 |
| msgid "'df' was too small; have used %d" |
| msgstr "'df' było zbyt małe; użyto %d" |
| |
| #. R/splineClasses.R: stop("'formula' must be of the form \"y ~ x\"") |
| #. R/splineClasses.R: stop("'formula' must be of the form \"y ~ x\"") |
| #: R/splineClasses.R:0 |
| msgid "'formula' must be of the form \"y ~ x\"" |
| msgstr "'formula' musi posiadać formę \"y ~ x\"" |
| |
| #. R/splineClasses.R: stop("'ord' must be >= 2") |
| #: R/splineClasses.R:0 |
| msgid "'ord' must be >= 2" |
| msgstr "'ord' musi być >= 2" |
| |
| #. R/splineClasses.R: stop("'ord' must be positive integer, at most the number of knots") |
| #: R/splineClasses.R:0 |
| msgid "'ord' must be positive integer, at most the number of knots" |
| msgstr "" |
| "'ord' musi być dodatnią liczbą całkowitą, równą co najwyżej liczbie węzłów" |
| |
| #. R/splineClasses.R: stop("currently implemented only for cubic splines") |
| #: R/splineClasses.R:0 |
| msgid "currently implemented only for cubic splines" |
| msgstr "aktualnie zaimplementowane tylko dla szcześciennych splajnów" |
| |
| #. R/splineClasses.R: stop("empty 'derivs'") |
| #: R/splineClasses.R:0 |
| msgid "empty 'derivs'" |
| msgstr "puste 'derivs'" |
| |
| #. R/splineClasses.R: stop("knot positions must be non-decreasing") |
| #. R/splineClasses.R: stop("knot positions must be non-decreasing") |
| #: R/splineClasses.R:0 |
| msgid "knot positions must be non-decreasing" |
| msgstr "pozycje węzłów muszą być niemalejące" |
| |
| #. R/splineClasses.R: stop("knot positions must be strictly increasing") |
| #: R/splineClasses.R:0 |
| msgid "knot positions must be strictly increasing" |
| msgstr "pozycje węzłów muszą być ściśle rosnące" |
| |
| #. R/splineClasses.R: stop("length of 'derivs' is larger than length of 'x'") |
| #: R/splineClasses.R:0 |
| msgid "length of 'derivs' is larger than length of 'x'" |
| msgstr "długość 'derivs' jest większa niż długość 'x'" |
| |
| #. R/splineClasses.R: stop("lengths of 'x' and 'y' must be the same") |
| #: R/splineClasses.R:0 |
| msgid "lengths of 'x' and 'y' must be the same" |
| msgstr "długości 'x' oraz 'y' muszą być takie same" |
| |
| #. R/splineClasses.R: stop("lengths of 'x' and 'y' must match") |
| #: R/splineClasses.R:0 |
| msgid "lengths of 'x' and 'y' must match" |
| msgstr "długości 'x' oraz 'y' muszą być zgodne" |
| |
| #. R/splineClasses.R: stop("must have at least 'ord' knots") |
| #: R/splineClasses.R:0 |
| msgid "must have at least 'ord' knots" |
| msgstr "potrzeba mieć przynajmniej węzły 'ord'" |
| |
| #. R/splineClasses.R: gettextf("must have at least 'ord'=%d points", ord) |
| #: R/splineClasses.R:0 |
| msgid "must have at least 'ord'=%d points" |
| msgstr "wymagane jest co najmniej 'ord' = %d punktów" |
| |
| #. R/splineClasses.R: gettextf("need at least %s (=%d) knots", "2*ord -1", 2 * ord - 1) |
| #: R/splineClasses.R:0 |
| msgid "need at least %s (=%d) knots" |
| msgstr "potrzeba przynamniej %s (=%d) wezłów" |
| |
| #. R/splines.R: warning("some 'x' values beyond boundary knots may cause ill-conditioned bases") |
| #: R/splines.R:0 |
| msgid "some 'x' values beyond boundary knots may cause ill-conditioned bases" |
| msgstr "" |
| "niektóre wartości 'x' poza zakresem węzłów mogą powodować źle uwarunkowane " |
| "bazy" |
| |
| #. R/splineClasses.R: stop("spline must be monotone") |
| #: R/splineClasses.R:0 |
| msgid "spline must be monotone" |
| msgstr "funkcja sklejana musi być funkcją monotoniczną" |
| |
| #. R/splineClasses.R: gettextf("the 'x' data must be in the range %g to %g unless you set '%s'", knots[ord], knots[nk - degree], "outer.ok = TRUE") |
| #: R/splineClasses.R:0 |
| msgid "the 'x' data must be in the range %g to %g unless you set '%s'" |
| msgstr "dane 'x' muszą być w przedziale od %g do %g chyba, że ustawiono '%s'" |
| |
| #. R/splineClasses.R: stop("the range of 'x' values exceeds one period") |
| #: R/splineClasses.R:0 |
| msgid "the range of 'x' values exceeds one period" |
| msgstr "zakres wartości 'x' przekracza jeden okres" |
| |
| #. R/splineClasses.R: stop("values of 'x' must be distinct") |
| #. R/splineClasses.R: stop("values of 'x' must be distinct") |
| #: R/splineClasses.R:0 |
| msgid "values of 'x' must be distinct" |
| msgstr "wartości 'x' muszą być różne" |
| |
| #. R/splineClasses.R: stop("values of 'x' must be strictly increasing") |
| #: R/splineClasses.R:0 |
| msgid "values of 'x' must be strictly increasing" |
| msgstr "wartości 'x' muszą być ściśle rosnące" |