| /*****************************************************************************\ | |
| * gpu.c - driver for gpu plugin | |
| ***************************************************************************** | |
| * Copyright (C) SchedMD LLC. | |
| * | |
| * This file is part of Slurm, a resource management program. | |
| * For details, see <https://slurm.schedmd.com/>. | |
| * Please also read the included file: DISCLAIMER. | |
| * | |
| * Slurm is free software; you can redistribute it and/or modify it under | |
| * the terms of the GNU General Public License as published by the Free | |
| * Software Foundation; either version 2 of the License, or (at your option) | |
| * any later version. | |
| * | |
| * In addition, as a special exception, the copyright holders give permission | |
| * to link the code of portions of this program with the OpenSSL library under | |
| * certain conditions as described in each individual source file, and | |
| * distribute linked combinations including the two. You must obey the GNU | |
| * General Public License in all respects for all of the code used other than | |
| * OpenSSL. If you modify file(s) with this exception, you may extend this | |
| * exception to your version of the file(s), but you are not obligated to do | |
| * so. If you do not wish to do so, delete this exception statement from your | |
| * version. If you delete this exception statement from all source files in | |
| * the program, then also delete it here. | |
| * | |
| * Slurm is distributed in the hope that it will be useful, but WITHOUT ANY | |
| * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS | |
| * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more | |
| * details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with Slurm; if not, write to the Free Software Foundation, Inc., | |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. | |
| \*****************************************************************************/ | |
| #include <dlfcn.h> | |
| #include "src/common/assoc_mgr.h" | |
| #include "src/common/list.h" | |
| #include "src/common/plugin.h" | |
| #include "src/common/xmalloc.h" | |
| #include "src/interfaces/gpu.h" | |
| /* Gres symbols provided by the plugin */ | |
| typedef struct slurm_ops { | |
| list_t *(*get_system_gpu_list) (node_config_load_t *node_conf); | |
| void (*step_hardware_init) (bitstr_t *usable_gpus, | |
| char *tres_freq); | |
| void (*step_hardware_fini) (void); | |
| char *(*test_cpu_conv) (char *cpu_range); | |
| int (*energy_read) (uint32_t dv_ind, gpu_status_t *gpu); | |
| void (*get_device_count) (uint32_t *device_count); | |
| int (*usage_read) (pid_t pid, acct_gather_data_t *data); | |
| } slurm_ops_t; | |
| /* | |
| * These strings must be kept in the same order as the fields | |
| * declared for slurm_ops_t. | |
| */ | |
| static const char *syms[] = { | |
| "gpu_p_get_system_gpu_list", | |
| "gpu_p_step_hardware_init", | |
| "gpu_p_step_hardware_fini", | |
| "gpu_p_test_cpu_conv", | |
| "gpu_p_energy_read", | |
| "gpu_p_get_device_count", | |
| "gpu_p_usage_read", | |
| }; | |
| /* Local variables */ | |
| static slurm_ops_t ops; | |
| static plugin_context_t *g_context = NULL; | |
| static pthread_mutex_t g_context_lock = PTHREAD_MUTEX_INITIALIZER; | |
| static void *ext_lib_handle = NULL; | |
| /* | |
| * Parses fake_gpus_file for fake GPU devices and adds them to gres_list_system | |
| * | |
| * The file format is: <type>|<sys_cpu_count>|<cpu_range>|<links>|<device_file> | |
| * | |
| * Each line represents a single GPU device. Therefore, <device_file> can't | |
| * specify more than one file (i.e. ranges like [1-2] won't work). | |
| * | |
| * Each line has a max of 256 characters, including the newline. | |
| * | |
| * If `_` or `(null)` is specified, then the value will be left NULL or 0. | |
| * | |
| * If a <cpu_range> is of the form `~F0F0`, an array of unsigned longs will be | |
| * generated with the specified cpu hex mask and then converted to a bitstring. | |
| * This is to test converting the cpu mask from NVML to Slurm. | |
| * Only 0xF and 0x0 are supported. | |
| */ | |
| static void _add_fake_gpus_from_file(list_t *gres_list_system, | |
| char *fake_gpus_file) | |
| { | |
| char buffer[256]; | |
| int line_number = 0; | |
| FILE *f = fopen(fake_gpus_file, "r"); | |
| if (f == NULL) { | |
| error("Unable to read \"%s\": %m", fake_gpus_file); | |
| return; | |
| } | |
| while (fgets(buffer, 256, f)) { | |
| char *save_ptr = NULL; | |
| char *tok; | |
| int i = 0; | |
| gres_slurmd_conf_t gres_slurmd_conf = { | |
| .count = 1, | |
| .name = "gpu", | |
| }; | |
| line_number++; | |
| buffer[strcspn(buffer, "\r\n")] = '\0'; | |
| if (!buffer[0] || buffer[0] == '#') | |
| continue; | |
| debug("%s", buffer); | |
| tok = strtok_r(buffer, "|", &save_ptr); | |
| while (tok) { | |
| if (xstrcmp(tok, "(null)") == 0) { | |
| i++; | |
| tok = strtok_r(NULL, "|", &save_ptr); | |
| continue; | |
| } | |
| switch (i) { | |
| case 0: | |
| gres_slurmd_conf.type_name = xstrdup(tok); | |
| break; | |
| case 1: | |
| gres_slurmd_conf.cpu_cnt = atoi(tok); | |
| break; | |
| case 2: | |
| if (tok[0] == '~') | |
| /* accommodate special tests */ | |
| gres_slurmd_conf.cpus = | |
| gpu_g_test_cpu_conv(tok); | |
| else | |
| gres_slurmd_conf.cpus = xstrdup(tok); | |
| break; | |
| case 3: | |
| gres_slurmd_conf.links = xstrdup(tok); | |
| break; | |
| case 4: | |
| gres_slurmd_conf.file = xstrdup(tok); | |
| break; | |
| case 5: | |
| gres_slurmd_conf.unique_id = xstrdup(tok); | |
| break; | |
| case 6: | |
| gres_slurmd_conf.config_flags = | |
| gres_flags_parse(tok, NULL, NULL); | |
| break; | |
| default: | |
| error("Malformed line: too many data fields"); | |
| break; | |
| } | |
| i++; | |
| tok = strtok_r(NULL, "|", &save_ptr); | |
| } | |
| if ((i < 5) || (i > 7)) | |
| error("Line #%d in fake_gpus.conf failed to parse! Make sure that the line has no empty tokens and that the format is <type>|<sys_cpu_count>|<cpu_range>|<links>|<device_file>[|<unique_id>[|<flags>]]", | |
| line_number); | |
| if (!(gres_slurmd_conf.config_flags & GRES_CONF_ENV_SET)) | |
| warning("Line #%d in fake_gpus.conf has no env flags set. Real GPU plugins always set vendor env flags (e.g. nvidia_gpu_env).", | |
| line_number); | |
| gres_slurmd_conf.cpus_bitmap = | |
| bit_alloc(gres_slurmd_conf.cpu_cnt); | |
| if (bit_unfmt(gres_slurmd_conf.cpus_bitmap, | |
| gres_slurmd_conf.cpus)) | |
| fatal("bit_unfmt() failed for CPU range: %s", | |
| gres_slurmd_conf.cpus); | |
| add_gres_to_list(gres_list_system, &gres_slurmd_conf); | |
| FREE_NULL_BITMAP(gres_slurmd_conf.cpus_bitmap); | |
| xfree(gres_slurmd_conf.cpus); | |
| xfree(gres_slurmd_conf.file); | |
| xfree(gres_slurmd_conf.type_name); | |
| xfree(gres_slurmd_conf.links); | |
| xfree(gres_slurmd_conf.unique_id); | |
| } | |
| fclose(f); | |
| } | |
| static list_t *gpu_get_fake_system_list(void) | |
| { | |
| list_t *gres_list_system = NULL; | |
| struct stat config_stat; | |
| char *fake_gpus_file = get_extra_conf_path("fake_gpus.conf"); | |
| if (stat(fake_gpus_file, &config_stat) >= 0) { | |
| info("Adding fake system GPU data from %s", fake_gpus_file); | |
| gres_list_system = list_create(destroy_gres_slurmd_conf); | |
| _add_fake_gpus_from_file(gres_list_system, fake_gpus_file); | |
| } | |
| xfree(fake_gpus_file); | |
| return gres_list_system; | |
| } | |
| /* | |
| * Common function to dlopen() the appropriate gpu libraries, and | |
| * report back type needed. | |
| */ | |
| static char *_get_gpu_type(void) | |
| { | |
| /* | |
| * Here we are dlopening the gpu .so to verify it exists on this node. | |
| * | |
| * NOTE: We are dlopening these genericly on purpose. This is to make | |
| * it so we always use the lib that the card is running regardless of | |
| * what was put in configure. This dlopen is what will load the | |
| * symbols for the plugin to use. | |
| * | |
| * We are also doing this outside of the plugins on purpose as we want | |
| * to be able to deal with heterogeneous systems where not all the nodes | |
| * will have cards and we want the slurmds to still run there with only | |
| * 1 gres.conf file. | |
| */ | |
| uint32_t autodetect_flags = gres_get_autodetect_flags(); | |
| if (autodetect_flags & GRES_AUTODETECT_GPU_NVML) { | |
| #ifdef HAVE_NVML | |
| (void) dlerror(); | |
| if (!(ext_lib_handle = dlopen("libnvidia-ml.so", | |
| RTLD_NOW | RTLD_GLOBAL)) && | |
| !(ext_lib_handle = dlopen("libnvidia-ml.so.1", | |
| RTLD_NOW | RTLD_GLOBAL))) | |
| info("We were configured with nvml functionality, but that lib wasn't found on the system. Attempted loading libnvidia-ml.so and libnvidia-ml.so.1 without success. Last error is: %s", | |
| dlerror()); | |
| else | |
| return "gpu/nvml"; | |
| #else | |
| info("We were configured to autodetect nvml functionality, but we weren't able to find that lib when Slurm was configured."); | |
| #endif | |
| } else if (autodetect_flags & GRES_AUTODETECT_GPU_RSMI) { | |
| #ifdef HAVE_RSMI | |
| (void) dlerror(); | |
| if (!(ext_lib_handle = dlopen("librocm_smi64.so", | |
| RTLD_NOW | RTLD_GLOBAL))) | |
| info("Configured with rsmi, but that lib wasn't found. %s", | |
| dlerror()); | |
| else | |
| return "gpu/rsmi"; | |
| #else | |
| info("Configured with rsmi, but rsmi isn't enabled during the build."); | |
| #endif | |
| } else if (autodetect_flags & GRES_AUTODETECT_GPU_AMD) { | |
| return "gpu/amd"; | |
| } else if (autodetect_flags & GRES_AUTODETECT_GPU_ONEAPI) { | |
| #ifdef HAVE_ONEAPI | |
| (void) dlerror(); | |
| if (!(ext_lib_handle = dlopen("libze_loader.so", | |
| RTLD_NOW | RTLD_GLOBAL))) | |
| info("Configured with oneAPI, but that lib wasn't found. %s", | |
| dlerror()); | |
| else | |
| return "gpu/oneapi"; | |
| #else | |
| info("Configured with oneAPI, but oneAPI isn't enabled during the build."); | |
| #endif | |
| } else if (autodetect_flags & GRES_AUTODETECT_GPU_NRT) { | |
| return "gpu/nrt"; | |
| } else if (autodetect_flags & GRES_AUTODETECT_GPU_NVIDIA) { | |
| return "gpu/nvidia"; | |
| } | |
| return "gpu/generic"; | |
| } | |
| static int _gpu_clear_plugin_locked(void) | |
| { | |
| int rc = SLURM_SUCCESS; | |
| /* The plugin's fini() can still call into the vendor library */ | |
| if (g_context) { | |
| rc = plugin_context_destroy(g_context); | |
| g_context = NULL; | |
| } | |
| if (ext_lib_handle) { | |
| dlclose(ext_lib_handle); | |
| ext_lib_handle = NULL; | |
| } | |
| return rc; | |
| } | |
| static char *_gpu_create_plugin_context(bool error_on_failure) | |
| { | |
| const char *plugin_type = "gpu"; | |
| char *type = NULL; | |
| type = _get_gpu_type(); | |
| g_context = plugin_context_create( | |
| plugin_type, type, (void **)&ops, syms, sizeof(syms)); | |
| if (!g_context) { | |
| error("cannot create %s context for %s", | |
| plugin_type, type); | |
| } | |
| return type; | |
| } | |
| /* | |
| * Try init'ing GPU plugins in order until hardware is found (Autodetect=full). | |
| */ | |
| static void _gpu_plugin_init_full(node_config_load_t *node_conf) | |
| { | |
| char *type; | |
| static const uint32_t probe_order[] = { | |
| GRES_AUTODETECT_GPU_NVML, | |
| GRES_AUTODETECT_GPU_NVIDIA, | |
| GRES_AUTODETECT_GPU_RSMI, | |
| GRES_AUTODETECT_GPU_AMD, | |
| GRES_AUTODETECT_GPU_ONEAPI, | |
| GRES_AUTODETECT_GPU_NRT, | |
| }; | |
| xassert(!g_context); | |
| for (int i = 0; i < ARRAY_SIZE(probe_order); i++) { | |
| list_t *gres_list_system; | |
| gres_autodetect_flags_set_gpu(probe_order[i]); | |
| type = _gpu_create_plugin_context(false); | |
| if (!g_context) { | |
| (void) _gpu_clear_plugin_locked(); | |
| continue; | |
| } | |
| gres_list_system = gpu_g_get_system_gpu_list(node_conf); | |
| if (gres_list_system && list_count(gres_list_system)) { | |
| verbose("%s: autodetect=full selected %s", | |
| __func__, type); | |
| FREE_NULL_LIST(gres_list_system); | |
| return; | |
| } | |
| FREE_NULL_LIST(gres_list_system); | |
| _gpu_clear_plugin_locked(); | |
| } | |
| gres_autodetect_flags_set_gpu(GRES_AUTODETECT_UNSET); | |
| } | |
| extern int gpu_plugin_init(node_config_load_t *node_conf) | |
| { | |
| slurm_mutex_lock(&g_context_lock); | |
| if (!g_context && node_conf && node_conf->in_slurmd && | |
| (gres_get_autodetect_flags() & GRES_AUTODETECT_GPU_FULL)) { | |
| _gpu_plugin_init_full(node_conf); | |
| /* Probe found no devices; fall through to gpu/generic. */ | |
| } | |
| if (!g_context) { | |
| _gpu_create_plugin_context(true); | |
| } | |
| slurm_mutex_unlock(&g_context_lock); | |
| return g_context ? SLURM_SUCCESS : SLURM_ERROR; | |
| } | |
| extern int gpu_plugin_fini(void) | |
| { | |
| int rc; | |
| if (!g_context) | |
| return SLURM_SUCCESS; | |
| slurm_mutex_lock(&g_context_lock); | |
| rc = _gpu_clear_plugin_locked(); | |
| slurm_mutex_unlock(&g_context_lock); | |
| return rc; | |
| } | |
| extern void gpu_get_tres_pos(int *gpumem_pos, int *gpuutil_pos) | |
| { | |
| static int loc_gpumem_pos = -1; | |
| static int loc_gpuutil_pos = -1; | |
| static bool inited = false; | |
| if (!inited) { | |
| slurmdb_tres_rec_t tres_rec; | |
| memset(&tres_rec, 0, sizeof(slurmdb_tres_rec_t)); | |
| tres_rec.type = "gres"; | |
| tres_rec.name = "gpuutil"; | |
| loc_gpuutil_pos = assoc_mgr_find_tres_pos(&tres_rec, false); | |
| tres_rec.name = "gpumem"; | |
| loc_gpumem_pos = assoc_mgr_find_tres_pos(&tres_rec, false); | |
| inited = true; | |
| } | |
| if (gpumem_pos) | |
| *gpumem_pos = loc_gpumem_pos; | |
| if (gpuutil_pos) | |
| *gpuutil_pos = loc_gpuutil_pos; | |
| } | |
| extern list_t *gpu_g_get_system_gpu_list(node_config_load_t *node_conf) | |
| { | |
| list_t *fake = gpu_get_fake_system_list(); | |
| if (fake) | |
| return fake; | |
| /* No fake override; only probe real hardware from slurmd. */ | |
| if (node_conf && !node_conf->in_slurmd) | |
| return NULL; | |
| xassert(g_context); | |
| return (*(ops.get_system_gpu_list))(node_conf); | |
| } | |
| extern void gpu_g_step_hardware_init(bitstr_t *usable_gpus, char *tres_freq) | |
| { | |
| xassert(g_context); | |
| (*(ops.step_hardware_init))(usable_gpus, tres_freq); | |
| } | |
| extern void gpu_g_step_hardware_fini(void) | |
| { | |
| xassert(g_context); | |
| (*(ops.step_hardware_fini))(); | |
| } | |
| extern char *gpu_g_test_cpu_conv(char *cpu_range) | |
| { | |
| xassert(g_context); | |
| return (*(ops.test_cpu_conv))(cpu_range); | |
| } | |
| extern int gpu_g_energy_read(uint32_t dv_ind, gpu_status_t *gpu) | |
| { | |
| xassert(g_context); | |
| return (*(ops.energy_read))(dv_ind, gpu); | |
| } | |
| extern void gpu_g_get_device_count(uint32_t *device_count) | |
| { | |
| xassert(g_context); | |
| (*(ops.get_device_count))(device_count); | |
| } | |
| extern int gpu_g_usage_read(pid_t pid, acct_gather_data_t *data) | |
| { | |
| xassert(g_context); | |
| return (*(ops.usage_read))(pid, data); | |
| } |